Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

6 files changed, 53 insertions, 76 deletions

diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 20df01a..940d38c 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -677,6 +677,9 @@ qh_make (
 				goto done;
 			}
 		} else {
+			struct usb_tt	*tt = urb->dev->tt;
+			int		think_time;
+
 			/* gap is f(FS/LS transfer times) */
 			qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed,
 					is_input, 0, maxp) / (125 * 1000);
@@ -690,6 +693,10 @@ qh_make (
 				qh->c_usecs = HS_USECS (0);
 			}
 
+			think_time = tt ? tt->think_time : 0;
+			qh->tt_usecs = NS_TO_US (think_time +
+					usb_calc_bus_time (urb->dev->speed,
+					is_input, 0, max_packet (maxp)));
 			qh->period = urb->interval;
 		}
 	}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 4c972b5..ccc7300 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -700,6 +700,7 @@ iso_stream_init (
 
 	} else {
 		u32		addr;
+		int		think_time;
 
 		addr = dev->ttport << 24;
 		if (!ehci_is_TDI(ehci)
@@ -709,6 +710,9 @@ iso_stream_init (
 		addr |= epnum << 8;
 		addr |= dev->devnum;
 		stream->usecs = HS_USECS_ISO (maxp);
+		think_time = dev->tt ? dev->tt->think_time : 0;
+		stream->tt_usecs = NS_TO_US (think_time + usb_calc_bus_time (
+				dev->speed, is_input, 1, maxp));
 		if (is_input) {
 			u32	tmp;
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index a754215..20c9b55 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -421,6 +421,7 @@ struct ehci_qh {
 	u8			usecs;		/* intr bandwidth */
 	u8			gap_uf;		/* uframes split/csplit gap */
 	u8			c_usecs;	/* ... split completion bw */
+	u16			tt_usecs;	/* tt downstream bandwidth */
 	unsigned short		period;		/* polling interval */
 	unsigned short		start;		/* where polling starts */
 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
@@ -479,6 +480,7 @@ struct ehci_iso_stream {
 	 */
 	u8			interval;
 	u8			usecs, c_usecs;
+	u16			tt_usecs;
 	u16			maxp;
 	u16			raw_mask;
 	unsigned		bandwidth;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 75128c3..41bbae8 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -83,7 +83,7 @@
 #include "../core/hcd.h"
 #include "isp116x.h"
 
-#define DRIVER_VERSION	"08 Apr 2005"
+#define DRIVER_VERSION	"05 Aug 2005"
 #define DRIVER_DESC	"ISP116x USB Host Controller Driver"
 
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -629,14 +629,12 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 			ERR("Unrecoverable error\n");
 			/* What should we do here? Reset?  */
 		}
-		if (intstat & HCINT_RHSC) {
-			isp116x->rhstatus =
-			    isp116x_read_reg32(isp116x, HCRHSTATUS);
-			isp116x->rhport[0] =
-			    isp116x_read_reg32(isp116x, HCRHPORT1);
-			isp116x->rhport[1] =
-			    isp116x_read_reg32(isp116x, HCRHPORT2);
-		}
+		if (intstat & HCINT_RHSC)
+			/* When root hub or any of its ports is going
+			   to come out of suspend, it may take more
+			   than 10ms for status bits to stabilize. */
+			mod_timer(&hcd->rh_timer, jiffies
+				  + msecs_to_jiffies(20) + 1);
 		if (intstat & HCINT_RD) {
 			DBG("---- remote wakeup\n");
 			schedule_work(&isp116x->rh_resume);
@@ -925,20 +923,27 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
 {
 	struct isp116x *isp116x = hcd_to_isp116x(hcd);
 	int ports, i, changed = 0;
+	unsigned long flags;
 
 	if (!HC_IS_RUNNING(hcd->state))
 		return -ESHUTDOWN;
 
-	ports = isp116x->rhdesca & RH_A_NDP;
+	/* Report no status change now, if we are scheduled to be
+	   called later */
+	if (timer_pending(&hcd->rh_timer))
+		return 0;
 
-	/* init status */
+	ports = isp116x->rhdesca & RH_A_NDP;
+	spin_lock_irqsave(&isp116x->lock, flags);
+	isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
 	if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
 		buf[0] = changed = 1;
 	else
 		buf[0] = 0;
 
 	for (i = 0; i < ports; i++) {
-		u32 status = isp116x->rhport[i];
+		u32 status = isp116x->rhport[i] =
+		    isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
 
 		if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
 			      | RH_PS_OCIC | RH_PS_PRSC)) {
@@ -947,6 +952,7 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
 			continue;
 		}
 	}
+	spin_unlock_irqrestore(&isp116x->lock, flags);
 	return changed;
 }
 
@@ -1463,10 +1469,6 @@ static int isp116x_sw_reset(struct isp116x *isp116x)
 	return ret;
 }
 
-/*
-  Reset. Tries to perform platform-specific hardware
-  reset first; falls back to software reset.
-*/
 static int isp116x_reset(struct usb_hcd *hcd)
 {
 	struct isp116x *isp116x = hcd_to_isp116x(hcd);
@@ -1474,17 +1476,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
 	u16 clkrdy = 0;
 	int ret = 0, timeout = 15 /* ms */ ;
 
-	if (isp116x->board && isp116x->board->reset) {
-		/* Hardware reset */
-		isp116x->board->reset(hcd->self.controller, 1);
-		msleep(10);
-		if (isp116x->board->clock)
-			isp116x->board->clock(hcd->self.controller, 1);
-		msleep(1);
-		isp116x->board->reset(hcd->self.controller, 0);
-	} else
-		ret = isp116x_sw_reset(isp116x);
-
+	ret = isp116x_sw_reset(isp116x);
 	if (ret)
 		return ret;
 
@@ -1501,10 +1493,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
 		ERR("Clock not ready after 20ms\n");
 		/* After sw_reset the clock won't report to be ready, if
 		   H_WAKEUP pin is high. */
-		if (!isp116x->board || !isp116x->board->reset)
-			ERR("The driver does not support hardware wakeup.\n");
-			ERR("Please make sure that the H_WAKEUP pin "
-				"is pulled low!\n");
+		ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
 		ret = -ENODEV;
 	}
 	return ret;
@@ -1527,15 +1516,7 @@ static void isp116x_stop(struct usb_hcd *hcd)
 	isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
 	spin_unlock_irqrestore(&isp116x->lock, flags);
 
-	/* Put the chip into reset state */
-	if (isp116x->board && isp116x->board->reset)
-		isp116x->board->reset(hcd->self.controller, 0);
-	else
-		isp116x_sw_reset(isp116x);
-
-	/* Stop the clock */
-	if (isp116x->board && isp116x->board->clock)
-		isp116x->board->clock(hcd->self.controller, 0);
+	isp116x_sw_reset(isp116x);
 }
 
 /*
@@ -1561,6 +1542,9 @@ static int isp116x_start(struct usb_hcd *hcd)
 		return -ENODEV;
 	}
 
+	/* To be removed in future */
+	hcd->uses_new_polling = 1;
+
 	isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
 	isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
 
@@ -1569,7 +1553,7 @@ static int isp116x_start(struct usb_hcd *hcd)
 	if (board->sel15Kres)
 		val |= HCHWCFG_15KRSEL;
 	/* Remote wakeup won't work without working clock */
-	if (board->clknotstop || board->remote_wakeup_enable)
+	if (board->remote_wakeup_enable)
 		val |= HCHWCFG_CLKNOTSTOP;
 	if (board->oc_enable)
 		val |= HCHWCFG_ANALOG_OC;
@@ -1580,16 +1564,13 @@ static int isp116x_start(struct usb_hcd *hcd)
 	isp116x_write_reg16(isp116x, HCHWCFG, val);
 
 	/* ----- Root hub conf */
-	val = 0;
-	/* AN10003_1.pdf recommends NPS to be always 1 */
-	if (board->no_power_switching)
-		val |= RH_A_NPS;
-	if (board->power_switching_mode)
-		val |= RH_A_PSM;
-	if (board->potpg)
-		val |= (board->potpg << 24) & RH_A_POTPGT;
-	else
-		val |= (25 << 24) & RH_A_POTPGT;
+	val = (25 << 24) & RH_A_POTPGT;
+	/* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+	   be always set. Yet, instead, we request individual port
+	   power switching. */
+	val |= RH_A_PSM;
+	/* Report overcurrent per port */
+	val |= RH_A_OCPM;
 	isp116x_write_reg32(isp116x, HCRHDESCA, val);
 	isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
 
@@ -1619,9 +1600,6 @@ static int isp116x_start(struct usb_hcd *hcd)
 
 	/* Go operational */
 	val = HCCONTROL_USB_OPER;
-	/* Remote wakeup connected - NOT SUPPORTED */
-	/*  if (board->remote_wakeup_connected)
-	   val |= HCCONTROL_RWC;  */
 	if (board->remote_wakeup_enable)
 		val |= HCCONTROL_RWE;
 	isp116x_write_reg32(isp116x, HCCONTROL, val);
@@ -1670,7 +1648,7 @@ static int __init_or_module isp116x_remove(struct device *dev)
 	struct platform_device *pdev;
 	struct resource *res;
 
-	if(!hcd)
+	if (!hcd)
 		return 0;
 	isp116x = hcd_to_isp116x(hcd);
 	pdev = container_of(dev, struct platform_device, dev);
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 17964c3..2515333 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -14,8 +14,6 @@
  * This file is licenced under the GPL.
  */
 
-#include <asm/usb.h>
-
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
 
@@ -23,9 +21,7 @@
  * usb_hcd_ppc_soc_probe - initialize On-Chip HCDs
  * Context: !in_interrupt()
  *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
+ * Allocates basic resources for this USB host controller.
  *
  * Store this function in the HCD's struct pci_driver as probe().
  */
@@ -37,7 +33,6 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 	struct ohci_hcd	*ohci;
 	struct resource *res;
 	int irq;
-	struct usb_hcd_platform_data *pd = pdev->dev.platform_data;
 
 	pr_debug("initializing PPC-SOC USB Controller\n");
 
@@ -73,9 +68,6 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 		goto err2;
 	}
 
-	if (pd->start && (retval = pd->start(pdev)))
-		goto err3;
-
 	ohci = hcd_to_ohci(hcd);
 	ohci->flags |= OHCI_BIG_ENDIAN;
 	ohci_hcd_init(ohci);
@@ -85,9 +77,7 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 		return retval;
 
 	pr_debug("Removing PPC-SOC USB Controller\n");
-	if (pd && pd->stop)
-		pd->stop(pdev);
- err3:
+
 	iounmap(hcd->regs);
  err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -105,25 +95,21 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
  * @pdev: USB Host Controller being removed
  * Context: !in_interrupt()
  *
- * Reverses the effect of usb_hcd_ppc_soc_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
+ * Reverses the effect of usb_hcd_ppc_soc_probe().
+ * It is always called from a thread
  * context, normally "rmmod", "apmd", or something similar.
  *
  */
 static void usb_hcd_ppc_soc_remove(struct usb_hcd *hcd,
 		struct platform_device *pdev)
 {
-	struct usb_hcd_platform_data *pd = pdev->dev.platform_data;
-
 	usb_remove_hcd(hcd);
 
 	pr_debug("stopping PPC-SOC USB Controller\n");
-	if (pd && pd->stop)
-		pd->stop(pdev);
 
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_hcd_put(hcd);
+	usb_put_hcd(hcd);
 }
 
 static int __devinit
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index e940166..3d9bcf7 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -129,7 +129,7 @@ static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
 
 	if (info->power_control != NULL) {
 		info->port[port-1].power = to;
-		(info->power_control)(port, to);
+		(info->power_control)(port-1, to);
 	}
 }
 
@@ -339,8 +339,8 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 	struct usb_hcd *hcd = NULL;
 	int retval;
 
-	s3c2410_usb_set_power(dev->dev.platform_data, 0, 1);
 	s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
+	s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
 
 	hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
 	if (hcd == NULL)