UHCI: Eliminate asynchronous skeleton Queue Headers

This patch (as856) attempts to improve the performance of uhci-hcd by
removing the asynchronous skeleton Queue Headers.  They don't contain
any useful information but the controller has to read through them at
least once every millisecond, incurring a non-zero DMA overhead.

Now all the asynchronous queues are combined, along with the period-1
interrupt queue, into a single list with a single skeleton QH.  The
start of the low-speed control, full-speed control, and bulk sublists
is determined by linear search.  Since there should rarely be more
than a couple of QHs in the list, the searches should incur a much
smaller total load than keeping the skeleton QHs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 256 insertions, 113 deletions

diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index a067713..8d24d3d 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -220,16 +220,6 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
 	return out - buf;
 }
 
-static const char * const qh_names[] = {
-  "skel_unlink_qh", "skel_iso_qh",
-  "skel_int128_qh", "skel_int64_qh",
-  "skel_int32_qh", "skel_int16_qh",
-  "skel_int8_qh", "skel_int4_qh",
-  "skel_int2_qh", "skel_int1_qh",
-  "skel_ls_control_qh", "skel_fs_control_qh",
-  "skel_bulk_qh", "skel_term_qh"
-};
-
 static int uhci_show_sc(int port, unsigned short status, char *buf, int len)
 {
 	char *out = buf;
@@ -352,6 +342,12 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 	struct uhci_td *td;
 	struct list_head *tmp, *head;
 	int nframes, nerrs;
+	__le32 link;
+
+	static const char * const qh_names[] = {
+		"unlink", "iso", "int128", "int64", "int32", "int16",
+		"int8", "int4", "int2", "async", "term"
+	};
 
 	out += uhci_show_root_hub_state(uhci, out, len - (out - buf));
 	out += sprintf(out, "HC status\n");
@@ -374,7 +370,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 	nframes = 10;
 	nerrs = 0;
 	for (i = 0; i < UHCI_NUMFRAMES; ++i) {
-		__le32 link, qh_dma;
+		__le32 qh_dma;
 
 		j = 0;
 		td = uhci->frame_cpu[i];
@@ -430,23 +426,21 @@ check_link:
 
 	for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
 		int cnt = 0;
+		__le32 fsbr_link = 0;
 
 		qh = uhci->skelqh[i];
-		out += sprintf(out, "- %s\n", qh_names[i]); \
+		out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \
 		out += uhci_show_qh(qh, out, len - (out - buf), 4);
 
 		/* Last QH is the Terminating QH, it's different */
-		if (i == UHCI_NUM_SKELQH - 1) {
-			if (qh->link != UHCI_PTR_TERM)
-				out += sprintf(out, "    bandwidth reclamation on!\n");
-
+		if (i == SKEL_TERM) {
 			if (qh_element(qh) != LINK_TO_TD(uhci->term_td))
 				out += sprintf(out, "    skel_term_qh element is not set to term_td!\n");
-
+			if (link == LINK_TO_QH(uhci->skel_term_qh))
+				goto check_qh_link;
 			continue;
 		}
 
-		j = (i < 9) ? 9 : i+1;		/* Next skeleton */
 		head = &qh->node;
 		tmp = head->next;
 
@@ -456,14 +450,26 @@ check_link:
 			if (++cnt <= 10)
 				out += uhci_show_qh(qh, out,
 						len - (out - buf), 4);
+			if (!fsbr_link && qh->skel >= SKEL_FSBR)
+				fsbr_link = LINK_TO_QH(qh);
 		}
 		if ((cnt -= 10) > 0)
 			out += sprintf(out, "    Skipped %d QHs\n", cnt);
 
-		if (i > 1 && i < UHCI_NUM_SKELQH - 1) {
-			if (qh->link != LINK_TO_QH(uhci->skelqh[j]))
-				out += sprintf(out, "    last QH not linked to next skeleton!\n");
-		}
+		link = UHCI_PTR_TERM;
+		if (i <= SKEL_ISO)
+			;
+		else if (i < SKEL_ASYNC)
+			link = LINK_TO_QH(uhci->skel_async_qh);
+		else if (!uhci->fsbr_is_on)
+			;
+		else if (fsbr_link)
+			link = fsbr_link;
+		else
+			link = LINK_TO_QH(uhci->skel_term_qh);
+check_qh_link:
+		if (qh->link != link)
+			out += sprintf(out, "    last QH not linked to next skeleton!\n");
 	}
 
 	return out - buf;
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 1f0833ab..44da433 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -13,7 +13,7 @@
  * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
  *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
  * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
- * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
  *
  * Intel documents this fairly well, and as far as I know there
  * are no royalties or anything like that, but even so there are
@@ -107,10 +107,10 @@ static __le32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
 	 * interrupt QHs, which will help spread out bandwidth utilization.
 	 *
 	 * ffs (Find First bit Set) does exactly what we need:
-	 * 1,3,5,...  => ffs = 0 => use skel_int2_qh = skelqh[8],
-	 * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
+	 * 1,3,5,...  => ffs = 0 => use period-2 QH = skelqh[8],
+	 * 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc.
 	 * ffs >= 7 => not on any high-period queue, so use
-	 *	skel_int1_qh = skelqh[9].
+	 *	period-1 QH = skelqh[9].
 	 * Add in UHCI_NUMFRAMES to insure at least one bit is set.
 	 */
 	skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
@@ -540,16 +540,18 @@ static void uhci_shutdown(struct pci_dev *pdev)
  *
  * The hardware doesn't really know any difference
  * in the queues, but the order does matter for the
- * protocols higher up. The order is:
+ * protocols higher up.  The order in which the queues
+ * are encountered by the hardware is:
  *
- *  - any isochronous events handled before any
+ *  - All isochronous events are handled before any
  *    of the queues. We don't do that here, because
  *    we'll create the actual TD entries on demand.
- *  - The first queue is the interrupt queue.
- *  - The second queue is the control queue, split into low- and full-speed
- *  - The third queue is bulk queue.
- *  - The fourth queue is the bandwidth reclamation queue, which loops back
- *    to the full-speed control queue.
+ *  - The first queue is the high-period interrupt queue.
+ *  - The second queue is the period-1 interrupt and async
+ *    (low-speed control, full-speed control, then bulk) queue.
+ *  - The third queue is the terminating bandwidth reclamation queue,
+ *    which contains no members, loops back to itself, and is present
+ *    only when FSBR is on and there are no full-speed control or bulk QHs.
  */
 static int uhci_start(struct usb_hcd *hcd)
 {
@@ -626,30 +628,18 @@ static int uhci_start(struct usb_hcd *hcd)
 	}
 
 	/*
-	 * 8 Interrupt queues; link all higher int queues to int1,
-	 * then link int1 to control and control to bulk
+	 * 8 Interrupt queues; link all higher int queues to int1 = async
 	 */
-	uhci->skel_int128_qh->link =
-			uhci->skel_int64_qh->link =
-			uhci->skel_int32_qh->link =
-			uhci->skel_int16_qh->link =
-			uhci->skel_int8_qh->link =
-			uhci->skel_int4_qh->link =
-			uhci->skel_int2_qh->link = LINK_TO_QH(
-				uhci->skel_int1_qh);
-
-	uhci->skel_int1_qh->link = LINK_TO_QH(uhci->skel_ls_control_qh);
-	uhci->skel_ls_control_qh->link = LINK_TO_QH(uhci->skel_fs_control_qh);
-	uhci->skel_fs_control_qh->link = LINK_TO_QH(uhci->skel_bulk_qh);
-	uhci->skel_bulk_qh->link = LINK_TO_QH(uhci->skel_term_qh);
+	for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
+		uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh);
+	uhci->skel_async_qh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
 
 	/* This dummy TD is to work around a bug in Intel PIIX controllers */
 	uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
-		(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
-	uhci->term_td->link = LINK_TO_TD(uhci->term_td);
-
-	uhci->skel_term_qh->link = UHCI_PTR_TERM;
-	uhci->skel_term_qh->element = LINK_TO_TD(uhci->term_td);
+			(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
+	uhci->term_td->link = UHCI_PTR_TERM;
+	uhci->skel_async_qh->element = uhci->skel_term_qh->element =
+			LINK_TO_TD(uhci->term_td);
 
 	/*
 	 * Fill the frame list: make all entries point to the proper
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index a8c256b..1b3d234 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -135,7 +135,6 @@ struct uhci_qh {
 	struct usb_host_endpoint *hep;	/* Endpoint information */
 	struct usb_device *udev;
 	struct list_head queue;		/* Queue of urbps for this QH */
-	struct uhci_qh *skel;		/* Skeleton for this QH */
 	struct uhci_td *dummy_td;	/* Dummy TD to end the queue */
 	struct uhci_td *post_td;	/* Last TD completed */
 
@@ -151,6 +150,7 @@ struct uhci_qh {
 
 	int state;			/* QH_STATE_xxx; see above */
 	int type;			/* Queue type (control, bulk, etc) */
+	int skel;			/* Skeleton queue number */
 
 	unsigned int initial_toggle:1;	/* Endpoint's current toggle value */
 	unsigned int needs_fixup:1;	/* Must fix the TD toggle values */
@@ -276,12 +276,13 @@ static inline u32 td_status(struct uhci_td *td) {
 /*
  * The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for
  * automatic queuing. To make it easy to insert entries into the schedule,
- * we have a skeleton of QHs for each predefined Interrupt latency,
- * low-speed control, full-speed control, bulk, and terminating QH
- * (see explanation for the terminating QH below).
+ * we have a skeleton of QHs for each predefined Interrupt latency.
+ * Asynchronous QHs (low-speed control, full-speed control, and bulk)
+ * go onto the period-1 interrupt list, since they all get accessed on
+ * every frame.
  *
- * When we want to add a new QH, we add it to the end of the list for the
- * skeleton QH.  For instance, the schedule list can look like this:
+ * When we want to add a new QH, we add it to the list starting from the
+ * appropriate skeleton QH.  For instance, the schedule can look like this:
  *
  * skel int128 QH
  * dev 1 interrupt QH
@@ -289,50 +290,47 @@ static inline u32 td_status(struct uhci_td *td) {
  * skel int64 QH
  * skel int32 QH
  * ...
- * skel int1 QH
- * skel low-speed control QH
- * dev 5 control QH
- * skel full-speed control QH
- * skel bulk QH
+ * skel int1 + async QH
+ * dev 5 low-speed control QH
  * dev 1 bulk QH
  * dev 2 bulk QH
- * skel terminating QH
  *
- * The terminating QH is used for 2 reasons:
- * - To place a terminating TD which is used to workaround a PIIX bug
- *   (see Intel errata for explanation), and
- * - To loop back to the full-speed control queue for full-speed bandwidth
- *   reclamation.
+ * There is a special terminating QH used to keep full-speed bandwidth
+ * reclamation active when no full-speed control or bulk QHs are linked
+ * into the schedule.  It has an inactive TD (to work around a PIIX bug,
+ * see the Intel errata) and it points back to itself.
  *
- * There's a special skeleton QH for Isochronous QHs.  It never appears
- * on the schedule, and Isochronous TDs go on the schedule before the
+ * There's a special skeleton QH for Isochronous QHs which never appears
+ * on the schedule.  Isochronous TDs go on the schedule before the
  * the skeleton QHs.  The hardware accesses them directly rather than
  * through their QH, which is used only for bookkeeping purposes.
  * While the UHCI spec doesn't forbid the use of QHs for Isochronous,
  * it doesn't use them either.  And the spec says that queues never
  * advance on an error completion status, which makes them totally
  * unsuitable for Isochronous transfers.
+ *
+ * There's also a special skeleton QH used for QHs which are in the process
+ * of unlinking and so may still be in use by the hardware.  It too never
+ * appears on the schedule.
  */
 
-#define UHCI_NUM_SKELQH		14
-#define skel_unlink_qh		skelqh[0]
-#define skel_iso_qh		skelqh[1]
-#define skel_int128_qh		skelqh[2]
-#define skel_int64_qh		skelqh[3]
-#define skel_int32_qh		skelqh[4]
-#define skel_int16_qh		skelqh[5]
-#define skel_int8_qh		skelqh[6]
-#define skel_int4_qh		skelqh[7]
-#define skel_int2_qh		skelqh[8]
-#define skel_int1_qh		skelqh[9]
-#define skel_ls_control_qh	skelqh[10]
-#define skel_fs_control_qh	skelqh[11]
-#define skel_bulk_qh		skelqh[12]
-#define skel_term_qh		skelqh[13]
-
-/* Find the skelqh entry corresponding to an interval exponent */
-#define UHCI_SKEL_INDEX(exponent)	(9 - exponent)
-
+#define UHCI_NUM_SKELQH		11
+#define SKEL_UNLINK		0
+#define skel_unlink_qh		skelqh[SKEL_UNLINK]
+#define SKEL_ISO		1
+#define skel_iso_qh		skelqh[SKEL_ISO]
+	/* int128, int64, ..., int1 = 2, 3, ..., 9 */
+#define SKEL_INDEX(exponent)	(9 - exponent)
+#define SKEL_ASYNC		9
+#define skel_async_qh		skelqh[SKEL_ASYNC]
+#define SKEL_TERM		10
+#define skel_term_qh		skelqh[SKEL_TERM]
+
+/* The following entries refer to sublists of skel_async_qh */
+#define SKEL_LS_CONTROL		20
+#define SKEL_FS_CONTROL		21
+#define SKEL_FSBR		SKEL_FS_CONTROL
+#define SKEL_BULK		22
 
 /*
  *	The UHCI controller and root hub
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index a0c6bf6..f4ebdb3 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -13,7 +13,7 @@
  * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
  *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
  * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
- * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
  */
 
 
@@ -45,14 +45,43 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
  */
 static void uhci_fsbr_on(struct uhci_hcd *uhci)
 {
+	struct uhci_qh *fsbr_qh, *lqh, *tqh;
+
 	uhci->fsbr_is_on = 1;
-	uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_fs_control_qh);
+	lqh = list_entry(uhci->skel_async_qh->node.prev,
+			struct uhci_qh, node);
+
+	/* Find the first FSBR QH.  Linear search through the list is
+	 * acceptable because normally FSBR gets turned on as soon as
+	 * one QH needs it. */
+	fsbr_qh = NULL;
+	list_for_each_entry_reverse(tqh, &uhci->skel_async_qh->node, node) {
+		if (tqh->skel < SKEL_FSBR)
+			break;
+		fsbr_qh = tqh;
+	}
+
+	/* No FSBR QH means we must insert the terminating skeleton QH */
+	if (!fsbr_qh) {
+		uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
+		wmb();
+		lqh->link = uhci->skel_term_qh->link;
+
+	/* Otherwise loop the last QH to the first FSBR QH */
+	} else
+		lqh->link = LINK_TO_QH(fsbr_qh);
 }
 
 static void uhci_fsbr_off(struct uhci_hcd *uhci)
 {
+	struct uhci_qh *lqh;
+
 	uhci->fsbr_is_on = 0;
-	uhci->skel_term_qh->link = UHCI_PTR_TERM;
+	lqh = list_entry(uhci->skel_async_qh->node.prev,
+			struct uhci_qh, node);
+
+	/* End the async list normally and unlink the terminating QH */
+	lqh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
 }
 
 static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb)
@@ -404,12 +433,81 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first)
 }
 
 /*
- * Put a QH on the schedule in both hardware and software
+ * Link an Isochronous QH into its skeleton's list
  */
-static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
+static inline void link_iso(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	list_add_tail(&qh->node, &uhci->skel_iso_qh->node);
+
+	/* Isochronous QHs aren't linked by the hardware */
+}
+
+/*
+ * Link a high-period interrupt QH into the schedule at the end of its
+ * skeleton's list
+ */
+static void link_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh)
 {
 	struct uhci_qh *pqh;
 
+	list_add_tail(&qh->node, &uhci->skelqh[qh->skel]->node);
+
+	pqh = list_entry(qh->node.prev, struct uhci_qh, node);
+	qh->link = pqh->link;
+	wmb();
+	pqh->link = LINK_TO_QH(qh);
+}
+
+/*
+ * Link a period-1 interrupt or async QH into the schedule at the
+ * correct spot in the async skeleton's list, and update the FSBR link
+ */
+static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct uhci_qh *pqh, *lqh;
+	__le32 link_to_new_qh;
+	__le32 *extra_link = &link_to_new_qh;
+
+	/* Find the predecessor QH for our new one and insert it in the list.
+	 * The list of QHs is expected to be short, so linear search won't
+	 * take too long. */
+	list_for_each_entry_reverse(pqh, &uhci->skel_async_qh->node, node) {
+		if (pqh->skel <= qh->skel)
+			break;
+	}
+	list_add(&qh->node, &pqh->node);
+	qh->link = pqh->link;
+
+	link_to_new_qh = LINK_TO_QH(qh);
+
+	/* If this is now the first FSBR QH, take special action */
+	if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
+			qh->skel >= SKEL_FSBR) {
+		lqh = list_entry(uhci->skel_async_qh->node.prev,
+				struct uhci_qh, node);
+
+		/* If the new QH is also the last one, we must unlink
+		 * the terminating skeleton QH and make the new QH point
+		 * back to itself. */
+		if (qh == lqh) {
+			qh->link = link_to_new_qh;
+			extra_link = &uhci->skel_term_qh->link;
+
+		/* Otherwise the last QH must point to the new QH */
+		} else
+			extra_link = &lqh->link;
+	}
+
+	/* Link it into the schedule */
+	wmb();
+	*extra_link = pqh->link = link_to_new_qh;
+}
+
+/*
+ * Put a QH on the schedule in both hardware and software
+ */
+static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
 	WARN_ON(list_empty(&qh->queue));
 
 	/* Set the element pointer if it isn't set already.
@@ -431,18 +529,64 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 		return;
 	qh->state = QH_STATE_ACTIVE;
 
-	/* Move the QH from its old list to the end of the appropriate
+	/* Move the QH from its old list to the correct spot in the appropriate
 	 * skeleton's list */
 	if (qh == uhci->next_qh)
 		uhci->next_qh = list_entry(qh->node.next, struct uhci_qh,
 				node);
-	list_move_tail(&qh->node, &qh->skel->node);
+	list_del(&qh->node);
+
+	if (qh->skel == SKEL_ISO)
+		link_iso(uhci, qh);
+	else if (qh->skel < SKEL_ASYNC)
+		link_interrupt(uhci, qh);
+	else
+		link_async(uhci, qh);
+}
+
+/*
+ * Unlink a high-period interrupt QH from the schedule
+ */
+static void unlink_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct uhci_qh *pqh;
 
-	/* Link it into the schedule */
 	pqh = list_entry(qh->node.prev, struct uhci_qh, node);
-	qh->link = pqh->link;
-	wmb();
-	pqh->link = LINK_TO_QH(qh);
+	pqh->link = qh->link;
+	mb();
+}
+
+/*
+ * Unlink a period-1 interrupt or async QH from the schedule
+ */
+static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+	struct uhci_qh *pqh, *lqh;
+	__le32 link_to_next_qh = qh->link;
+
+	pqh = list_entry(qh->node.prev, struct uhci_qh, node);
+
+	/* If this is the first FSBQ QH, take special action */
+	if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
+			qh->skel >= SKEL_FSBR) {
+		lqh = list_entry(uhci->skel_async_qh->node.prev,
+				struct uhci_qh, node);
+
+		/* If this QH is also the last one, we must link in
+		 * the terminating skeleton QH. */
+		if (qh == lqh) {
+			link_to_next_qh = LINK_TO_QH(uhci->skel_term_qh);
+			uhci->skel_term_qh->link = link_to_next_qh;
+			wmb();
+			qh->link = link_to_next_qh;
+
+		/* Otherwise the last QH must point to the new first FSBR QH */
+		} else
+			lqh->link = link_to_next_qh;
+	}
+
+	pqh->link = link_to_next_qh;
+	mb();
 }
 
 /*
@@ -450,17 +594,18 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
  */
 static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 {
-	struct uhci_qh *pqh;
-
 	if (qh->state == QH_STATE_UNLINKING)
 		return;
 	WARN_ON(qh->state != QH_STATE_ACTIVE || !qh->udev);
 	qh->state = QH_STATE_UNLINKING;
 
 	/* Unlink the QH from the schedule and record when we did it */
-	pqh = list_entry(qh->node.prev, struct uhci_qh, node);
-	pqh->link = qh->link;
-	mb();
+	if (qh->skel == SKEL_ISO)
+		;
+	else if (qh->skel < SKEL_ASYNC)
+		unlink_interrupt(uhci, qh);
+	else
+		unlink_async(uhci, qh);
 
 	uhci_get_current_frame_number(uhci);
 	qh->unlink_frame = uhci->frame_number;
@@ -696,6 +841,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 	dma_addr_t data = urb->transfer_dma;
 	__le32 *plink;
 	struct urb_priv *urbp = urb->hcpriv;
+	int skel;
 
 	/* The "pipe" thing contains the destination in bits 8--18 */
 	destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP;
@@ -796,11 +942,13 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 	 * isn't in the CONFIGURED state. */
 	if (urb->dev->speed == USB_SPEED_LOW ||
 			urb->dev->state != USB_STATE_CONFIGURED)
-		qh->skel = uhci->skel_ls_control_qh;
+		skel = SKEL_LS_CONTROL;
 	else {
-		qh->skel = uhci->skel_fs_control_qh;
+		skel = SKEL_FS_CONTROL;
 		uhci_add_fsbr(uhci, urb);
 	}
+	if (qh->state != QH_STATE_ACTIVE)
+		qh->skel = skel;
 
 	urb->actual_length = -8;	/* Account for the SETUP packet */
 	return 0;
@@ -930,7 +1078,7 @@ nomem:
 	return -ENOMEM;
 }
 
-static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb,
+static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb,
 		struct uhci_qh *qh)
 {
 	int ret;
@@ -939,7 +1087,8 @@ static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb,
 	if (urb->dev->speed == USB_SPEED_LOW)
 		return -EINVAL;
 
-	qh->skel = uhci->skel_bulk_qh;
+	if (qh->state != QH_STATE_ACTIVE)
+		qh->skel = SKEL_BULK;
 	ret = uhci_submit_common(uhci, urb, qh);
 	if (ret == 0)
 		uhci_add_fsbr(uhci, urb);
@@ -967,7 +1116,7 @@ static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb,
 		if (exponent < 0)
 			return -EINVAL;
 		qh->period = 1 << exponent;
-		qh->skel = uhci->skelqh[UHCI_SKEL_INDEX(exponent)];
+		qh->skel = SKEL_INDEX(exponent);
 
 		/* For now, interrupt phase is fixed by the layout
 		 * of the QH lists. */
@@ -1215,7 +1364,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
 		qh->iso_status = 0;
 	}
 
-	qh->skel = uhci->skel_iso_qh;
+	qh->skel = SKEL_ISO;
 	if (!qh->bandwidth_reserved)
 		uhci_reserve_bandwidth(uhci, qh);
 	return 0;