Merge branch 'samsung/cleanup' into next/boards

Conflicts:
	arch/arm/mach-imx/mach-imx6q.c
	arch/arm/mach-omap2/board-ti8168evm.c
	arch/arm/mach-s3c64xx/Kconfig
	arch/arm/mach-tegra/Makefile
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/common.c

Lots of relatively simple conflicts between the board
changes and stuff from the arm tree. This pulls in
the resolution from the samsung/cleanup tree, so we
don't get conflicting merges.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 10 insertions, 10 deletions

diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index a7dc1e1..2ac4ac2 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -18,7 +18,7 @@
 
 #include "isp1760-hcd.h"
 
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -31,7 +31,7 @@
 #include <linux/pci.h>
 #endif
 
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
 struct isp1760 {
 	struct usb_hcd *hcd;
 	int rst_gpio;
@@ -437,7 +437,7 @@ static int __init isp1760_init(void)
 	ret = platform_driver_register(&isp1760_plat_driver);
 	if (!ret)
 		any_ret = 0;
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
 	ret = platform_driver_register(&isp1760_of_driver);
 	if (!ret)
 		any_ret = 0;
@@ -457,7 +457,7 @@ module_init(isp1760_init);
 static void __exit isp1760_exit(void)
 {
 	platform_driver_unregister(&isp1760_plat_driver);
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
 	platform_driver_unregister(&isp1760_of_driver);
 #endif
 #ifdef CONFIG_PCI
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 95a9fec..5df0b0e 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,7 +223,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
 	if (port < 0 || port >= 2)
 		return;
 
-	if (pdata->vbus_pin[port] <= 0)
+	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return;
 
 	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
@@ -234,7 +234,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
 	if (port < 0 || port >= 2)
 		return -EINVAL;
 
-	if (pdata->vbus_pin[port] <= 0)
+	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return -EINVAL;
 
 	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
@@ -465,7 +465,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 
 	if (pdata) {
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
-			if (pdata->vbus_pin[i] <= 0)
+			if (!gpio_is_valid(pdata->vbus_pin[i]))
 				continue;
 			gpio_request(pdata->vbus_pin[i], "ohci_vbus");
 			ohci_at91_usb_set_power(pdata, i, 1);
@@ -474,7 +474,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
 			int ret;
 
-			if (pdata->overcurrent_pin[i] <= 0)
+			if (!gpio_is_valid(pdata->overcurrent_pin[i]))
 				continue;
 			gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
 
@@ -499,14 +499,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 
 	if (pdata) {
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
-			if (pdata->vbus_pin[i] <= 0)
+			if (!gpio_is_valid(pdata->vbus_pin[i]))
 				continue;
 			ohci_at91_usb_set_power(pdata, i, 0);
 			gpio_free(pdata->vbus_pin[i]);
 		}
 
 		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
-			if (pdata->overcurrent_pin[i] <= 0)
+			if (!gpio_is_valid(pdata->overcurrent_pin[i]))
 				continue;
 			free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
 			gpio_free(pdata->overcurrent_pin[i]);