diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 13:23:01 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 13:23:01 -0700 |
commit | d9a807461fc8cc0d6ba589ea0730d139122af012 (patch) | |
tree | 9d8c7a044659d821748dd40718a22557c04e4299 /drivers/usb/host/xhci.c | |
parent | 3498d13b8090c0b0ef911409fbc503a7c4cca6ef (diff) | |
parent | 70c048a238c780c226eb4b115ebaa908cb3b34ec (diff) | |
download | op-kernel-dev-d9a807461fc8cc0d6ba589ea0730d139122af012.zip op-kernel-dev-d9a807461fc8cc0d6ba589ea0730d139122af012.tar.gz |
Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB changes from Greg Kroah-Hartman:
"Here is the big USB pull request for 3.7-rc1
There are lots of gadget driver changes (including copying a bunch of
files into the drivers/staging/ccg/ directory so that the other gadget
drivers can be fixed up properly without breaking that driver), and we
remove the old obsolete ub.c driver from the tree.
There are also the usual XHCI set of updates, and other various driver
changes and updates. We also are trying hard to remove the old dbg()
macro, but the final bits of that removal will be coming in through
the networking tree before we can delete it for good.
All of these patches have been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.
* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
USB: uas: fix gcc warning
USB: uas: fix locking
USB: Fix race condition when removing host controllers
USB: uas: add locking
USB: uas: fix abort
USB: uas: remove aborted field, replace with status bit.
USB: uas: fix task management
USB: uas: keep track of command urbs
xhci: Intel Panther Point BEI quirk.
powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Revert "usb : Add sysfs files to control port power."
USB: serial: remove vizzini driver
usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
Increase XHCI suspend timeout to 16ms
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
USB: sierra_ms: don't keep unused variable
fsl/usb: Add support for USB controller version 2.4
USB: qcaux: add Pantech vendor class match
...
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r-- | drivers/usb/host/xhci.c | 43 |
1 files changed, 30 insertions, 13 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6ece0ed..8d7fcbb 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); * handshake done). There are two failure modes: "usec" have passed (major * hardware flakeout), or the register reads as all-ones (hardware removed). */ -static int handshake(struct xhci_hcd *xhci, void __iomem *ptr, +int handshake(struct xhci_hcd *xhci, void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; @@ -105,9 +105,10 @@ int xhci_halt(struct xhci_hcd *xhci) ret = handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); - if (!ret) + if (!ret) { xhci->xhc_state |= XHCI_STATE_HALTED; - else + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + } else xhci_warn(xhci, "Host not halted after %u microseconds.\n", XHCI_MAX_HALT_USEC); return ret; @@ -470,6 +471,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void) dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!dmi_product_name || !dmi_sys_vendor) + return false; if (!(strstr(dmi_sys_vendor, "Hewlett-Packard"))) return false; @@ -581,6 +584,7 @@ static int xhci_run_finished(struct xhci_hcd *xhci) return -ENODEV; } xhci->shared_hcd->state = HC_STATE_RUNNING; + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; if (xhci->quirks & XHCI_NEC_HOST) xhci_ring_cmd_db(xhci); @@ -886,7 +890,7 @@ int xhci_suspend(struct xhci_hcd *xhci) command &= ~CMD_RUN; xhci_writel(xhci, command, &xhci->op_regs->command); if (handshake(xhci, &xhci->op_regs->status, - STS_HALT, STS_HALT, 100*100)) { + STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) { xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -1948,7 +1952,7 @@ static void xhci_finish_resource_reservation(struct xhci_hcd *xhci, xhci->num_active_eps); } -unsigned int xhci_get_block_size(struct usb_device *udev) +static unsigned int xhci_get_block_size(struct usb_device *udev) { switch (udev->speed) { case USB_SPEED_LOW: @@ -1966,7 +1970,8 @@ unsigned int xhci_get_block_size(struct usb_device *udev) } } -unsigned int xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) +static unsigned int +xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) { if (interval_bw->overhead[LS_OVERHEAD_TYPE]) return LS_OVERHEAD; @@ -2521,6 +2526,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, struct completion *cmd_completion; u32 *cmd_status; struct xhci_virt_device *virt_dev; + union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); virt_dev = xhci->devs[udev->slot_id]; @@ -2566,6 +2572,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } init_completion(cmd_completion); + cmd_trb = xhci->cmd_ring->dequeue; if (!ctx_change) ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, udev->slot_id, must_succeed); @@ -2587,14 +2594,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, /* Wait for the configure endpoint command to complete */ timeleft = wait_for_completion_interruptible_timeout( cmd_completion, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for %s command\n", timeleft == 0 ? "Timeout" : "Signal", ctx_change == 0 ? "configure endpoint" : "evaluate context"); - /* FIXME cancel the configure endpoint command */ + /* cancel the configure endpoint command */ + ret = xhci_cancel_cmd(xhci, command, cmd_trb); + if (ret < 0) + return ret; return -ETIME; } @@ -3543,8 +3553,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) unsigned long flags; int timeleft; int ret; + union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); + cmd_trb = xhci->cmd_ring->dequeue; ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); @@ -3556,12 +3568,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) /* XXX: how much time for xHC slot assignment? */ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for a slot\n", timeleft == 0 ? "Timeout" : "Signal"); - /* FIXME cancel the enable slot request */ - return 0; + /* cancel the enable slot request */ + return xhci_cancel_cmd(xhci, NULL, cmd_trb); } if (!xhci->slot_id) { @@ -3622,6 +3634,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u64 temp_64; + union xhci_trb *cmd_trb; if (!udev->slot_id) { xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id); @@ -3660,6 +3673,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); spin_lock_irqsave(&xhci->lock, flags); + cmd_trb = xhci->cmd_ring->dequeue; ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, udev->slot_id); if (ret) { @@ -3672,7 +3686,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); /* FIXME: From section 4.3.4: "Software shall be responsible for timing * the SetAddress() "recovery interval" required by USB and aborting the * command on a timeout. @@ -3680,7 +3694,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for address device command\n", timeleft == 0 ? "Timeout" : "Signal"); - /* FIXME cancel the address device command */ + /* cancel the address device command */ + ret = xhci_cancel_cmd(xhci, NULL, cmd_trb); + if (ret < 0) + return ret; return -ETIME; } |