summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-ring.c
diff options
context:
space:
mode:
authorSarah Sharp <sarah.a.sharp@linux.intel.com>2010-12-02 19:10:02 -0800
committerSarah Sharp <sarah.a.sharp@linux.intel.com>2011-03-13 18:23:33 -0700
commitff9d78b36f76687c91c67b9f4c5c33bc888ed2f9 (patch)
treec269f0ec7f830a478ab5738f7579221d7caecf5d /drivers/usb/host/xhci-ring.c
parentc56354378426e550aaf6ddf3983f502a8fddeab5 (diff)
downloadop-kernel-dev-ff9d78b36f76687c91c67b9f4c5c33bc888ed2f9.zip
op-kernel-dev-ff9d78b36f76687c91c67b9f4c5c33bc888ed2f9.tar.gz
USB: Set usb_hcd->state and flags for shared roothubs.
The hcd->flags are in a sorry state. Some of them are clearly specific to the particular roothub (HCD_POLL_RH, HCD_POLL_PENDING, and HCD_WAKEUP_PENDING), but some flags are related to PCI device state (HCD_HW_ACCESSIBLE and HCD_SAW_IRQ). This is an issue when one PCI device can have two roothubs that share the same IRQ line and hardware. Make sure to set HCD_FLAG_SAW_IRQ for both roothubs when an interrupt is serviced, or an URB is unlinked without an interrupt. (We can't tell if the host actually serviced an interrupt for a particular bus, but we can tell it serviced some interrupt.) HCD_HW_ACCESSIBLE is set once by usb_add_hcd(), which is set for both roothubs as they are added, so it doesn't need to be modified. HCD_POLL_RH and HCD_POLL_PENDING are only checked by the USB core, and they are never set by the xHCI driver, since the roothub never needs to be polled. The usb_hcd's state field is a similar mess. Sometimes the state applies to the underlying hardware: HC_STATE_HALT, HC_STATE_RUNNING, and HC_STATE_QUIESCING. But sometimes the state refers to the roothub state: HC_STATE_RESUMING and HC_STATE_SUSPENDED. Alan Stern recently made the USB core not rely on the hcd->state variable. Internally, the xHCI driver still checks for HC_STATE_SUSPENDED, so leave that code in. Remove all references to HC_STATE_HALT, since the xHCI driver only sets and doesn't test those variables. We still have to set HC_STATE_RUNNING, since Alan's patch has a bug that means the roothub won't get registered if we don't set that. Alan's patch made the USB core check a different variable when trying to determine whether to suspend a roothub. The xHCI host has a split roothub, where two buses are registered for one PCI device. Each bus in the xHCI split roothub can be suspended separately, but both buses must be suspended before the PCI device can be suspended. Therefore, make sure that the USB core checks HCD_RH_RUNNING() for both roothubs before suspending the PCI host. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
-rw-r--r--drivers/usb/host/xhci-ring.c2
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9e2b26c..47763be 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2181,6 +2181,8 @@ irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
irqreturn_t ret;
set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+ if (hcd->shared_hcd)
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
ret = xhci_irq(hcd);
OpenPOWER on IntegriCloud