diff options
author | Mathias Nyman <mathias.nyman@linux.intel.com> | 2015-10-01 18:40:38 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-10-04 10:34:17 +0100 |
commit | b50107bb83d027dfd36bb7efb90570559757d6ae (patch) | |
tree | bfdf003f25884dd1e25fea40f80fdb2eb66808be /drivers/usb/host/xhci-hub.c | |
parent | 7117522520b9101af7a0602d6b0d1e67d689fc6b (diff) | |
download | op-kernel-dev-b50107bb83d027dfd36bb7efb90570559757d6ae.zip op-kernel-dev-b50107bb83d027dfd36bb7efb90570559757d6ae.tar.gz |
xhci: check xhci hardware for USB 3.1 support
Set the controller speed to HCD_USB31 to if host hardware supports USB 3.1
For PCI xhci controllers the USB 3.1 support is checked from SBRN bits in
pci config space. Platform controllers will need to set xhci->sbrn == 0x31
to indicate USB 3.1 support before calling xhci_gen_setup().
Also make sure xhci driver works correctly with speed set to HCD_USB31
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
-rw-r--r-- | drivers/usb/host/xhci-hub.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 483b5f8..a4d429c 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -262,7 +262,7 @@ static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, struct usb_hub_descriptor *desc) { - if (hcd->speed == HCD_USB3) + if (hcd->speed >= HCD_USB3) xhci_usb3_hub_descriptor(hcd, xhci, desc); else xhci_usb2_hub_descriptor(hcd, xhci, desc); @@ -351,7 +351,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, if (!xhci->devs[i]) continue; speed = xhci->devs[i]->udev->speed; - if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3)) + if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3)) && xhci->devs[i]->fake_port == port) { slot_id = i; break; @@ -440,7 +440,7 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, u16 wIndex, __le32 __iomem *addr, u32 port_status) { /* Don't allow the USB core to disable SuperSpeed ports. */ - if (hcd->speed == HCD_USB3) { + if (hcd->speed >= HCD_USB3) { xhci_dbg(xhci, "Ignoring request to disable " "SuperSpeed port.\n"); return; @@ -508,7 +508,7 @@ static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) int max_ports; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (hcd->speed == HCD_USB3) { + if (hcd->speed >= HCD_USB3) { max_ports = xhci->num_usb3_ports; *port_array = xhci->usb3_ports; } else { @@ -691,7 +691,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, if ((raw_port_status & PORT_RC)) status |= USB_PORT_STAT_C_RESET << 16; /* USB3.0 only */ - if (hcd->speed == HCD_USB3) { + if (hcd->speed >= HCD_USB3) { /* Port link change with port in resume state should not be * reported to usbcore, as this is an internal state to be * handled by xhci driver. Reporting PLC to usbcore may @@ -707,7 +707,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; } - if (hcd->speed != HCD_USB3) { + if (hcd->speed < HCD_USB3) { if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3 && (raw_port_status & PORT_POWER)) status |= USB_PORT_STAT_SUSPEND; @@ -770,7 +770,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, && (raw_port_status & PORT_POWER) && (bus_state->suspended_ports & (1 << wIndex))) { bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed != HCD_USB3) + if (hcd->speed < HCD_USB3) bus_state->port_c_suspend |= 1 << wIndex; } if (raw_port_status & PORT_CONNECT) { @@ -784,13 +784,13 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, if (raw_port_status & PORT_RESET) status |= USB_PORT_STAT_RESET; if (raw_port_status & PORT_POWER) { - if (hcd->speed == HCD_USB3) + if (hcd->speed >= HCD_USB3) status |= USB_SS_PORT_STAT_POWER; else status |= USB_PORT_STAT_POWER; } /* Update Port Link State */ - if (hcd->speed == HCD_USB3) { + if (hcd->speed >= HCD_USB3) { xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status); /* * Verify if all USB3 Ports Have entered U0 already. @@ -835,7 +835,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * descriptor for the USB 3.0 roothub. If not, we stall the * endpoint, like external hubs do. */ - if (hcd->speed == HCD_USB3 && + if (hcd->speed >= HCD_USB3 && (wLength < USB_DT_SS_HUB_SIZE || wValue != (USB_DT_SS_HUB << 8))) { xhci_dbg(xhci, "Wrong hub descriptor type for " @@ -1040,7 +1040,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = readl(port_array[wIndex]); break; case USB_PORT_FEAT_U1_TIMEOUT: - if (hcd->speed != HCD_USB3) + if (hcd->speed < HCD_USB3) goto error; temp = readl(port_array[wIndex] + PORTPMSC); temp &= ~PORT_U1_TIMEOUT_MASK; @@ -1048,7 +1048,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, writel(temp, port_array[wIndex] + PORTPMSC); break; case USB_PORT_FEAT_U2_TIMEOUT: - if (hcd->speed != HCD_USB3) + if (hcd->speed < HCD_USB3) goto error; temp = readl(port_array[wIndex] + PORTPMSC); temp &= ~PORT_U2_TIMEOUT_MASK; |