summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/sl811-hcd.c
diff options
context:
space:
mode:
authorMarc Zyngier <maz@misterjones.org>2008-08-18 13:08:42 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2008-10-17 14:40:52 -0700
commit27140219373327f2291da5d74a78db0105b15060 (patch)
tree1cbb0eab32d9b847b0f030982429045ff0e8f041 /drivers/usb/host/sl811-hcd.c
parent7dbcbe88b1495f778f56c742391e49f580dc101a (diff)
downloadop-kernel-dev-27140219373327f2291da5d74a78db0105b15060.zip
op-kernel-dev-27140219373327f2291da5d74a78db0105b15060.tar.gz
USB: Let some USB host controllers get IRQ flags from resource
[This version fixes a thinko in the r8a66597 driver] This patch let a few discrete USB host controllers drivers (isp116x-hcd, r8a66597-hcd and sl811-hcd) obtain IRQ flags from their IORESOURCE_IRQ resource if configured as such, much like it's been done for the smc91x driver. It spares people writing support for specific boards the burden to configure the interrupt controller independantly, and keeps all IRQ related information in a single resource. HCD that are integrally part of a SoC have been left aside, as there is probably no "wiring" options... Tested on an Xscale PXA-255 based platform with isp116x-hcd. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host/sl811-hcd.c')
-rw-r--r--drivers/usb/host/sl811-hcd.c15
1 files changed, 11 insertions, 4 deletions
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 8a74bbb..e106e9d 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1620,22 +1620,26 @@ sl811h_probe(struct platform_device *dev)
{
struct usb_hcd *hcd;
struct sl811 *sl811;
- struct resource *addr, *data;
+ struct resource *addr, *data, *ires;
int irq;
void __iomem *addr_reg;
void __iomem *data_reg;
int retval;
u8 tmp, ioaddr = 0;
+ unsigned long irqflags;
/* basic sanity checks first. board-specific init logic should
* have initialized these three resources and probably board
* specific platform_data. we don't probe for IRQs, and do only
* minimal sanity checking.
*/
- irq = platform_get_irq(dev, 0);
- if (dev->num_resources < 3 || irq < 0)
+ ires = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+ if (dev->num_resources < 3 || !ires)
return -ENODEV;
+ irq = ires->start;
+ irqflags = ires->flags & IRQF_TRIGGER_MASK;
+
/* refuse to confuse usbcore */
if (dev->dev.dma_mask) {
DBG("no we won't dma\n");
@@ -1717,8 +1721,11 @@ sl811h_probe(struct platform_device *dev)
* triggers (e.g. most ARM CPUs). Initial driver stress testing
* was on a system with single edge triggering, so most sorts of
* triggering arrangement should work.
+ *
+ * Use resource IRQ flags if set by platform device setup.
*/
- retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+ irqflags |= IRQF_SHARED;
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | irqflags);
if (retval != 0)
goto err6;
OpenPOWER on IntegriCloud