summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-hcd.c
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2009-01-13 11:35:54 -0500
committerGreg Kroah-Hartman <gregkh@kvm.kroah.org>2009-01-27 16:15:32 -0800
commitbcca06efea883bdf3803a0bb0ffa60f26730387d (patch)
tree8dfffd0183fcf38f90aa36c2debee15f8336a96f /drivers/usb/host/ohci-hcd.c
parentb90de8aea36ae6fe8050a6e91b031369c4f251b2 (diff)
downloadop-kernel-dev-bcca06efea883bdf3803a0bb0ffa60f26730387d.zip
op-kernel-dev-bcca06efea883bdf3803a0bb0ffa60f26730387d.tar.gz
USB: don't enable wakeup by default for PCI host controllers
This patch (as1199) changes the initial wakeup settings for PCI USB host controllers. The controllers are marked as capable of waking the system, but wakeup is not enabled by default. It turns out that enabling wakeup for USB host controllers has a lot of bad consequences. As the simplest example, if a USB mouse or keyboard is unplugged immediately after the computer is put to sleep, the unplug will cause the system to wake back up again! We are better off marking them as wakeup-capable and leaving wakeup disabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Rafael J. Wysocki <rjw@sisk.pl> CC: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host/ohci-hcd.c')
-rw-r--r--drivers/usb/host/ohci-hcd.c8
1 files changed, 3 insertions, 5 deletions
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 65a9609..5cf5f1e 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci)
* to be checked in case boot firmware (BIOS/SMM/...) has set up
* wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
* If the bus glue detected wakeup capability then it should
- * already be enabled. Either way, if wakeup should be enabled
- * but isn't, we'll enable it now.
+ * already be enabled; if so we'll just enable it again.
*/
- if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
- && !device_can_wakeup(hcd->self.controller))
- device_init_wakeup(hcd->self.controller, 1);
+ if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+ device_set_wakeup_capable(hcd->self.controller, 1);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
OpenPOWER on IntegriCloud