USB: EHCI, OHCI: handover changes

This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss
of VBUS power during suspend.  In order for the USB-persist facility
to work correctly, it is necessary for low- and full-speed devices
attached to a high-speed port to be handed back to the companion
controller during resume processing.

This entails three changes: adding code to ehci-hcd to perform the
handover, removing code from ohci-hcd to turn off ports during
root-hub reinit, and adding code to ohci-hcd to turn on ports during
PCI controller resume.  (Other bus glue resume methods for platforms
supporting high-speed controllers would need a similar change, if any
existed.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 2 insertions, 19 deletions

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index a66637e..ce05e5f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -510,15 +510,7 @@ static int ohci_run (struct ohci_hcd *ohci)
 	// flush the writes
 	(void) ohci_readl (ohci, &ohci->regs->control);
 	msleep(temp);
-	temp = roothub_a (ohci);
-	if (!(temp & RH_A_NPS)) {
-		/* power down each port */
-		for (temp = 0; temp < ohci->num_ports; temp++)
-			ohci_writel (ohci, RH_PS_LSDA,
-				&ohci->regs->roothub.portstatus [temp]);
-	}
-	// flush those writes
-	(void) ohci_readl (ohci, &ohci->regs->control);
+
 	memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
 
 	/* 2msec timelimit here means no irqs/preempt */
@@ -826,17 +818,8 @@ static int ohci_restart (struct ohci_hcd *ohci)
 	if ((temp = ohci_run (ohci)) < 0) {
 		ohci_err (ohci, "can't restart, %d\n", temp);
 		return temp;
-	} else {
-		/* here we "know" root ports should always stay powered,
-		 * and that if we try to turn them back on the root hub
-		 * will respond to CSC processing.
-		 */
-		i = ohci->num_ports;
-		while (i--)
-			ohci_writel (ohci, RH_PS_PSS,
-				&ohci->regs->roothub.portstatus [i]);
-		ohci_dbg (ohci, "restart complete\n");
 	}
+	ohci_dbg(ohci, "restart complete\n");
 	return 0;
 }
 #endif