diff options
| author | Ramneek Mehresh <ramneek.mehresh@freescale.com> | 2013-09-16 15:11:33 +0530 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-09-26 11:59:57 -0700 |
| commit | ad1260e9fbf768d6bed227d9604ebee76a84aae3 (patch) | |
| tree | 18655a6182c91ee11dfb1ead04838151e2118c43 /drivers/usb/host/ehci-fsl.c | |
| parent | 831abf76643555a99b80a3b54adfa7e4fa0a3259 (diff) | |
| download | op-kernel-dev-ad1260e9fbf768d6bed227d9604ebee76a84aae3.zip op-kernel-dev-ad1260e9fbf768d6bed227d9604ebee76a84aae3.tar.gz | |
fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
For controller versions greater than 1.6, setting ULPI_PHY_CLK_SEL
bit when USB_EN bit is already set causes instability issues with
PHY_CLK_VLD bit. So USB_EN is set only for IP controller version
below 1.6 before setting ULPI_PHY_CLK_SEL bit
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ehci-fsl.c')
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 12 |
1 files changed, 3 insertions, 9 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 4449f56..d3166e6 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -130,7 +130,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, } /* Enable USB controller, 83xx or 8536 */ - if (pdata->have_sysif_regs) + if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); /* Don't need to set host mode here. It will be done by tdi_reset() */ @@ -232,15 +232,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ + clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); setbits32(non_ehci + FSL_SOC_USB_CTRL, - ULPI_PHY_CLK_SEL); - /* - * Due to controller issue of PHY_CLK_VALID in ULPI - * mode, we set USB_CTRL_USB_EN before checking - * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work. - */ - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, - UTMI_PHY_EN, USB_CTRL_USB_EN); + ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); } portsc |= PORT_PTS_ULPI; break; |
