diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/usb/gadget | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/usb/gadget')
25 files changed, 32007 insertions, 0 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig new file mode 100644 index 0000000..3b24f9f --- /dev/null +++ b/drivers/usb/gadget/Kconfig @@ -0,0 +1,389 @@ +# +# USB Gadget support on a system involves +# (a) a peripheral controller, and +# (b) the gadget driver using it. +# +# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! +# +# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). +# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). +# - Some systems have both kinds of of controller. +# +# With help from a special transceiver and a "Mini-AB" jack, systems with +# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). +# +menu "USB Gadget Support" + +config USB_GADGET + tristate "Support for USB Gadgets" + help + USB is a master/slave protocol, organized with one master + host (such as a PC) controlling up to 127 peripheral devices. + The USB hardware is asymmetric, which makes it easier to set up: + you can't connect a "to-the-host" connector to a peripheral. + + Linux can run in the host, or in the peripheral. In both cases + you need a low level bus controller driver, and some software + talking to it. Peripheral controllers are often discrete silicon, + or are integrated with the CPU in a microcontroller. The more + familiar host side controllers have names like like "EHCI", "OHCI", + or "UHCI", and are usually integrated into southbridges on PC + motherboards. + + Enable this configuration option if you want to run Linux inside + a USB peripheral device. Configure one hardware driver for your + peripheral/device side bus controller, and a "gadget driver" for + your peripheral protocol. (If you use modular gadget drivers, + you may configure more than one.) + + If in doubt, say "N" and don't enable these drivers; most people + don't have this kind of hardware (except maybe inside Linux PDAs). + + For more information, see <http://www.linux-usb.org/gadget> and + the kernel DocBook documentation for this API. + +config USB_GADGET_DEBUG_FILES + boolean "Debugging information files" + depends on USB_GADGET && PROC_FS + help + Some of the drivers in the "gadget" framework can expose + debugging information in files such as /proc/driver/udc + (for a peripheral controller). The information in these + files may help when you're troubleshooting or bringing up a + driver on a new board. Enable these files by choosing "Y" + here. If in doubt, or to conserve kernel memory, say "N". + +# +# USB Peripheral Controller Support +# +choice + prompt "USB Peripheral Controller" + depends on USB_GADGET + help + A USB device uses a controller to talk to its host. + Systems should have only one such upstream link. + Many controller drivers are platform-specific; these + often need board-specific hooks. + +config USB_GADGET_NET2280 + boolean "NetChip 2280" + depends on PCI + select USB_GADGET_DUALSPEED + help + NetChip 2280 is a PCI based USB peripheral controller which + supports both full and high speed USB 2.0 data transfers. + + It has six configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "net2280" and force all + gadget drivers to also be dynamically linked. + +config USB_NET2280 + tristate + depends on USB_GADGET_NET2280 + default USB_GADGET + +config USB_GADGET_PXA2XX + boolean "PXA 25x or IXP 4xx" + depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + help + Intel's PXA 25x series XScale ARM-5TE processors include + an integrated full speed USB 1.1 device controller. The + controller in the IXP 4xx series is register-compatible. + + It has fifteen fixed-function endpoints, as well as endpoint + zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa2xx_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_PXA2XX + tristate + depends on USB_GADGET_PXA2XX + default USB_GADGET + +# if there's only one gadget driver, using only two bulk endpoints, +# don't waste memory for the other endpoints +config USB_PXA2XX_SMALL + depends on USB_GADGET_PXA2XX + bool + default n if USB_ETH_RNDIS + default y if USB_ZERO + default y if USB_ETH + default y if USB_G_SERIAL + +config USB_GADGET_GOKU + boolean "Toshiba TC86C001 'Goku-S'" + depends on PCI + help + The Toshiba TC86C001 is a PCI device which includes controllers + for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). + + The device controller has three configurable (bulk or interrupt) + endpoints, plus endpoint zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "goku_udc" and to force all + gadget drivers to also be dynamically linked. + +config USB_GOKU + tristate + depends on USB_GADGET_GOKU + default USB_GADGET + + +config USB_GADGET_LH7A40X + boolean "LH7A40X" + depends on ARCH_LH7A40X + help + This driver provides USB Device Controller driver for LH7A40x + +config USB_LH7A40X + tristate + depends on USB_GADGET_LH7A40X + default USB_GADGET + + +config USB_GADGET_OMAP + boolean "OMAP USB Device Controller" + depends on ARCH_OMAP + select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + help + Many Texas Instruments OMAP processors have flexible full + speed USB device controllers, with support for up to 30 + endpoints (plus endpoint zero). This driver supports the + controller in the OMAP 1611, and should work with controllers + in other OMAP processors too, given minor tweaks. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "omap_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_OMAP + tristate + depends on USB_GADGET_OMAP + default USB_GADGET + +config USB_OTG + boolean "OTG Support" + depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD + help + The most notable feature of USB OTG is support for a + "Dual-Role" device, which can act as either a device + or a host. The initial role choice can be changed + later, when two dual-role devices talk to each other. + + Select this only if your OMAP board has a Mini-AB connector. + + +config USB_GADGET_DUMMY_HCD + boolean "Dummy HCD (DEVELOPMENT)" + depends on USB && EXPERIMENTAL + select USB_GADGET_DUALSPEED + help + This host controller driver emulates USB, looping all data transfer + requests back to a USB "gadget driver" in the same host. The host + side is the master; the gadget side is the slave. Gadget drivers + can be high, full, or low speed; and they have access to endpoints + like those from NET2280, PXA2xx, or SA1100 hardware. + + This may help in some stages of creating a driver to embed in a + Linux device, since it lets you debug several parts of the gadget + driver without its hardware or drivers being involved. + + Since such a gadget side driver needs to interoperate with a host + side Linux-USB device driver, this may help to debug both sides + of a USB protocol stack. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "dummy_hcd" and force all + gadget drivers to also be dynamically linked. + +config USB_DUMMY_HCD + tristate + depends on USB_GADGET_DUMMY_HCD + default USB_GADGET + +# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears +# first and will be selected by default. + +endchoice + +config USB_GADGET_DUALSPEED + bool + depends on USB_GADGET + default n + help + Means that gadget drivers should include extra descriptors + and code to handle dual-speed controllers. + +# +# USB Gadget Drivers +# +choice + tristate "USB Gadget Drivers" + depends on USB_GADGET + default USB_ETH + help + A Linux "Gadget Driver" talks to the USB Peripheral Controller + driver through the abstract "gadget" API. Some other operating + systems call these "client" drivers, of which "class drivers" + are a subset (implementing a USB device class specification). + A gadget driver implements one or more USB functions using + the peripheral hardware. + + Gadget drivers are hardware-neutral, or "platform independent", + except that they sometimes must understand quirks or limitations + of the particular controllers they work with. For example, when + a controller doesn't support alternate configurations or provide + enough of the right types of endpoints, the gadget driver might + not be able work with that controller, or might need to implement + a less common variant of a device class protocol. + +# this first set of drivers all depend on bulk-capable hardware. + +config USB_ZERO + tristate "Gadget Zero (DEVELOPMENT)" + depends on EXPERIMENTAL + help + Gadget Zero is a two-configuration device. It either sinks and + sources bulk data; or it loops back a configurable number of + transfers. It also implements control requests, for "chapter 9" + conformance. The driver needs only two bulk-capable endpoints, so + it can work on top of most device-side usb controllers. It's + useful for testing, and is also a working example showing how + USB "gadget drivers" can be written. + + Make this be the first driver you try using on top of any new + USB peripheral controller driver. Then you can use host-side + test software, like the "usbtest" driver, to put your hardware + and its driver through a basic set of functional tests. + + Gadget Zero also works with the host-side "usb-skeleton" driver, + and with many kinds of host-side test software. You may need + to tweak product and vendor IDs before host software knows about + this device, and arrange to select an appropriate configuration. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_zero". + +config USB_ZERO_HNPTEST + boolean "HNP Test Device" + depends on USB_ZERO && USB_OTG + help + You can configure this device to enumerate using the device + identifiers of the USB-OTG test device. That means that when + this gadget connects to another OTG device, with this one using + the "B-Peripheral" role, that device will use HNP to let this + one serve as the USB host instead (in the "B-Host" role). + +config USB_ETH + tristate "Ethernet Gadget (with CDC Ethernet support)" + depends on NET + help + This driver implements Ethernet style communication, in either + of two ways: + + - The "Communication Device Class" (CDC) Ethernet Control Model. + That protocol is often avoided with pure Ethernet adapters, in + favor of simpler vendor-specific hardware, but is widely + supported by firmware for smart network devices. + + - On hardware can't implement that protocol, a simple CDC subset + is used, placing fewer demands on USB. + + RNDIS support is a third option, more demanding than that subset. + + Within the USB device, this gadget driver exposes a network device + "usbX", where X depends on what other networking devices you have. + Treat it like a two-node Ethernet link: host, and gadget. + + The Linux-USB host-side "usbnet" driver interoperates with this + driver, so that deep I/O queues can be supported. On 2.4 kernels, + use "CDCEther" instead, if you're using the CDC option. That CDC + mode should also interoperate with standard CDC Ethernet class + drivers on other host operating systems. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_ether". + +config USB_ETH_RNDIS + bool "RNDIS support (EXPERIMENTAL)" + depends on USB_ETH && EXPERIMENTAL + default y + help + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. + + If you say "y" here, the Ethernet gadget driver will try to provide + a second device configuration, supporting RNDIS to talk to such + Microsoft USB hosts. + + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. + +config USB_GADGETFS + tristate "Gadget Filesystem (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + This driver provides a filesystem based API that lets user mode + programs implement a single-configuration USB device, including + endpoint I/O and control requests that don't relate to enumeration. + All endpoints, transfer speeds, and transfer types supported by + the hardware are available, through read() and write() calls. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "gadgetfs". + +config USB_FILE_STORAGE + tristate "File-backed Storage Gadget" + help + The File-backed Storage Gadget acts as a USB Mass Storage + disk drive. As its storage repository it can use a regular + file or a block device (in much the same way as the "loop" + device driver), specified as a module parameter. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_file_storage". + +config USB_FILE_STORAGE_TEST + bool "File-backed Storage Gadget testing version" + depends on USB_FILE_STORAGE + default n + help + Say "y" to generate the larger testing version of the + File-backed Storage Gadget, useful for probing the + behavior of USB Mass Storage hosts. Not needed for + normal operation. + +config USB_G_SERIAL + tristate "Serial Gadget (with CDC ACM support)" + help + The Serial Gadget talks to the Linux-USB generic serial driver. + This driver supports a CDC-ACM module option, which can be used + to interoperate with MS-Windows hosts or with the Linux-USB + "cdc-acm" driver. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_serial". + + For more information, see Documentation/usb/gadget_serial.txt + which includes instructions and a "driver info file" needed to + make MS-Windows work with this driver. + + +# put drivers that need isochronous transfer support (for audio +# or video class gadget drivers), or specific hardware, here. + +# - none yet + +endchoice + +endmenu diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile new file mode 100644 index 0000000..d5fd04d --- /dev/null +++ b/drivers/usb/gadget/Makefile @@ -0,0 +1,30 @@ +# +# USB peripheral controller drivers +# +obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o +obj-$(CONFIG_USB_NET2280) += net2280.o +obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o +obj-$(CONFIG_USB_GOKU) += goku_udc.o +obj-$(CONFIG_USB_OMAP) += omap_udc.o +obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o + +# +# USB gadget drivers +# +g_zero-objs := zero.o usbstring.o config.o epautoconf.o +g_ether-objs := ether.o usbstring.o config.o epautoconf.o +g_serial-objs := serial.o usbstring.o config.o epautoconf.o +gadgetfs-objs := inode.o +g_file_storage-objs := file_storage.o usbstring.o config.o \ + epautoconf.o + +ifeq ($(CONFIG_USB_ETH_RNDIS),y) + g_ether-objs += rndis.o +endif + +obj-$(CONFIG_USB_ZERO) += g_zero.o +obj-$(CONFIG_USB_ETH) += g_ether.o +obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o +obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o +obj-$(CONFIG_USB_G_SERIAL) += g_serial.o + diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c new file mode 100644 index 0000000..83b4866 --- /dev/null +++ b/drivers/usb/gadget/config.c @@ -0,0 +1,117 @@ +/* + * usb/gadget/config.c -- simplify building config descriptors + * + * Copyright (C) 2003 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/string.h> +#include <linux/device.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + + +/** + * usb_descriptor_fillbuf - fill buffer with descriptors + * @buf: Buffer to be filled + * @buflen: Size of buf + * @src: Array of descriptor pointers, terminated by null pointer. + * + * Copies descriptors into the buffer, returning the length or a + * negative error code if they can't all be copied. Useful when + * assembling descriptors for an associated set of interfaces used + * as part of configuring a composite device; or in other cases where + * sets of descriptors need to be marshaled. + */ +int +usb_descriptor_fillbuf(void *buf, unsigned buflen, + const struct usb_descriptor_header **src) +{ + u8 *dest = buf; + + if (!src) + return -EINVAL; + + /* fill buffer from src[] until null descriptor ptr */ + for (; 0 != *src; src++) { + unsigned len = (*src)->bLength; + + if (len > buflen) + return -EINVAL; + memcpy(dest, *src, len); + buflen -= len; + dest += len; + } + return dest - (u8 *)buf; +} + + +/** + * usb_gadget_config_buf - builts a complete configuration descriptor + * @config: Header for the descriptor, including characteristics such + * as power requirements and number of interfaces. + * @desc: Null-terminated vector of pointers to the descriptors (interface, + * endpoint, etc) defining all functions in this device configuration. + * @buf: Buffer for the resulting configuration descriptor. + * @length: Length of buffer. If this is not big enough to hold the + * entire configuration descriptor, an error code will be returned. + * + * This copies descriptors into the response buffer, building a descriptor + * for that configuration. It returns the buffer length or a negative + * status code. The config.wTotalLength field is set to match the length + * of the result, but other descriptor fields (including power usage and + * interface count) must be set by the caller. + * + * Gadget drivers could use this when constructing a config descriptor + * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the + * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. + */ +int usb_gadget_config_buf( + const struct usb_config_descriptor *config, + void *buf, + unsigned length, + const struct usb_descriptor_header **desc +) +{ + struct usb_config_descriptor *cp = buf; + int len; + + /* config descriptor first */ + if (length < USB_DT_CONFIG_SIZE || !desc) + return -EINVAL; + *cp = *config; + + /* then interface/endpoint/class/vendor/... */ + len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, + length - USB_DT_CONFIG_SIZE, desc); + if (len < 0) + return len; + len += USB_DT_CONFIG_SIZE; + if (len > 0xffff) + return -EINVAL; + + /* patch up the config descriptor */ + cp->bLength = USB_DT_CONFIG_SIZE; + cp->bDescriptorType = USB_DT_CONFIG; + cp->wTotalLength = cpu_to_le16(len); + cp->bmAttributes |= USB_CONFIG_ATT_ONE; + return len; +} + diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c new file mode 100644 index 0000000..8ef8a9c --- /dev/null +++ b/drivers/usb/gadget/dummy_hcd.c @@ -0,0 +1,1793 @@ +/* + * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> + * + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003-2005 Alan Stern + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +/* + * This exposes a device side "USB gadget" API, driven by requests to a + * Linux-USB host controller driver. USB traffic is simulated; there's + * no need for USB hardware. Use this with two other drivers: + * + * - Gadget driver, responding to requests (slave); + * - Host-side device driver, as already familiar in Linux. + * + * Having this all in one kernel can help some stages of development, + * bypassing some hardware (and driver) issues. UML could help too. + */ + +#define DEBUG + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/version.h> + +#include <linux/usb.h> +#include <linux/usb_gadget.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> + + +#include "../core/hcd.h" + + +#define DRIVER_DESC "USB Host+Gadget Emulator" +#define DRIVER_VERSION "17 Dec 2004" + +static const char driver_name [] = "dummy_hcd"; +static const char driver_desc [] = "USB Host+Gadget Emulator"; + +static const char gadget_name [] = "dummy_udc"; + +MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_AUTHOR ("David Brownell"); +MODULE_LICENSE ("GPL"); + +/*-------------------------------------------------------------------------*/ + +/* gadget side driver data structres */ +struct dummy_ep { + struct list_head queue; + unsigned long last_io; /* jiffies timestamp */ + struct usb_gadget *gadget; + const struct usb_endpoint_descriptor *desc; + struct usb_ep ep; + unsigned halted : 1; + unsigned already_seen : 1; + unsigned setup_stage : 1; +}; + +struct dummy_request { + struct list_head queue; /* ep's requests */ + struct usb_request req; +}; + +static inline struct dummy_ep *usb_ep_to_dummy_ep (struct usb_ep *_ep) +{ + return container_of (_ep, struct dummy_ep, ep); +} + +static inline struct dummy_request *usb_request_to_dummy_request + (struct usb_request *_req) +{ + return container_of (_req, struct dummy_request, req); +} + +/*-------------------------------------------------------------------------*/ + +/* + * Every device has ep0 for control requests, plus up to 30 more endpoints, + * in one of two types: + * + * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint + * number can be changed. Names like "ep-a" are used for this type. + * + * - Fixed Function: in other cases. some characteristics may be mutable; + * that'd be hardware-specific. Names like "ep12out-bulk" are used. + * + * Gadget drivers are responsible for not setting up conflicting endpoint + * configurations, illegal or unsupported packet lengths, and so on. + */ + +static const char ep0name [] = "ep0"; + +static const char *const ep_name [] = { + ep0name, /* everyone has ep0 */ + + /* act like a net2280: high speed, six configurable endpoints */ + "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f", + + /* or like pxa250: fifteen fixed function endpoints */ + "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int", + "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int", + "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso", + "ep15in-int", + + /* or like sa1100: two fixed function endpoints */ + "ep1out-bulk", "ep2in-bulk", +}; +#define DUMMY_ENDPOINTS (sizeof(ep_name)/sizeof(char *)) + +#define FIFO_SIZE 64 + +struct urbp { + struct urb *urb; + struct list_head urbp_list; +}; + +struct dummy { + spinlock_t lock; + + /* + * SLAVE/GADGET side support + */ + struct dummy_ep ep [DUMMY_ENDPOINTS]; + int address; + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct dummy_request fifo_req; + u8 fifo_buf [FIFO_SIZE]; + u16 devstatus; + + /* + * MASTER/HOST side support + */ + struct timer_list timer; + u32 port_status; + unsigned resuming:1; + unsigned long re_timeout; + + struct usb_device *udev; + struct list_head urbp_list; +}; + +static inline struct dummy *hcd_to_dummy (struct usb_hcd *hcd) +{ + return (struct dummy *) (hcd->hcd_priv); +} + +static inline struct usb_hcd *dummy_to_hcd (struct dummy *dum) +{ + return container_of((void *) dum, struct usb_hcd, hcd_priv); +} + +static inline struct device *dummy_dev (struct dummy *dum) +{ + return dummy_to_hcd(dum)->self.controller; +} + +static inline struct dummy *ep_to_dummy (struct dummy_ep *ep) +{ + return container_of (ep->gadget, struct dummy, gadget); +} + +static inline struct dummy *gadget_to_dummy (struct usb_gadget *gadget) +{ + return container_of (gadget, struct dummy, gadget); +} + +static inline struct dummy *gadget_dev_to_dummy (struct device *dev) +{ + return container_of (dev, struct dummy, gadget.dev); +} + +static struct dummy *the_controller; + +/*-------------------------------------------------------------------------*/ + +/* + * This "hardware" may look a bit odd in diagnostics since it's got both + * host and device sides; and it binds different drivers to each side. + */ +static struct platform_device the_pdev; + +static struct device_driver dummy_driver = { + .name = (char *) driver_name, + .bus = &platform_bus_type, +}; + +/*-------------------------------------------------------------------------*/ + +/* SLAVE/GADGET SIDE DRIVER + * + * This only tracks gadget state. All the work is done when the host + * side tries some (emulated) i/o operation. Real device controller + * drivers would do real i/o using dma, fifos, irqs, timers, etc. + */ + +#define is_enabled(dum) \ + (dum->port_status & USB_PORT_STAT_ENABLE) + +static int +dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct dummy *dum; + struct dummy_ep *ep; + unsigned max; + int retval; + + ep = usb_ep_to_dummy_ep (_ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dum = ep_to_dummy (ep); + if (!dum->driver || !is_enabled (dum)) + return -ESHUTDOWN; + max = le16_to_cpu(desc->wMaxPacketSize) & 0x3ff; + + /* drivers must not request bad settings, since lower levels + * (hardware or its drivers) may not check. some endpoints + * can't do iso, many have maxpacket limitations, etc. + * + * since this "hardware" driver is here to help debugging, we + * have some extra sanity checks. (there could be more though, + * especially for "ep9out" style fixed function ones.) + */ + retval = -EINVAL; + switch (desc->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_BULK: + if (strstr (ep->ep.name, "-iso") + || strstr (ep->ep.name, "-int")) { + goto done; + } + switch (dum->gadget.speed) { + case USB_SPEED_HIGH: + if (max == 512) + break; + /* conserve return statements */ + default: + switch (max) { + case 8: case 16: case 32: case 64: + /* we'll fake any legal size */ + break; + default: + case USB_SPEED_LOW: + goto done; + } + } + break; + case USB_ENDPOINT_XFER_INT: + if (strstr (ep->ep.name, "-iso")) /* bulk is ok */ + goto done; + /* real hardware might not handle all packet sizes */ + switch (dum->gadget.speed) { + case USB_SPEED_HIGH: + if (max <= 1024) + break; + /* save a return statement */ + case USB_SPEED_FULL: + if (max <= 64) + break; + /* save a return statement */ + default: + if (max <= 8) + break; + goto done; + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (strstr (ep->ep.name, "-bulk") + || strstr (ep->ep.name, "-int")) + goto done; + /* real hardware might not handle all packet sizes */ + switch (dum->gadget.speed) { + case USB_SPEED_HIGH: + if (max <= 1024) + break; + /* save a return statement */ + case USB_SPEED_FULL: + if (max <= 1023) + break; + /* save a return statement */ + default: + goto done; + } + break; + default: + /* few chips support control except on ep0 */ + goto done; + } + + _ep->maxpacket = max; + ep->desc = desc; + + dev_dbg (dummy_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d\n", + _ep->name, + desc->bEndpointAddress & 0x0f, + (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", + ({ char *val; + switch (desc->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_BULK: val = "bulk"; break; + case USB_ENDPOINT_XFER_ISOC: val = "iso"; break; + case USB_ENDPOINT_XFER_INT: val = "intr"; break; + default: val = "ctrl"; break; + }; val; }), + max); + + /* at this point real hardware should be NAKing transfers + * to that endpoint, until a buffer is queued to it. + */ + retval = 0; +done: + return retval; +} + +/* called with spinlock held */ +static void nuke (struct dummy *dum, struct dummy_ep *ep) +{ + while (!list_empty (&ep->queue)) { + struct dummy_request *req; + + req = list_entry (ep->queue.next, struct dummy_request, queue); + list_del_init (&req->queue); + req->req.status = -ESHUTDOWN; + + spin_unlock (&dum->lock); + req->req.complete (&ep->ep, &req->req); + spin_lock (&dum->lock); + } +} + +static int dummy_disable (struct usb_ep *_ep) +{ + struct dummy_ep *ep; + struct dummy *dum; + unsigned long flags; + int retval; + + ep = usb_ep_to_dummy_ep (_ep); + if (!_ep || !ep->desc || _ep->name == ep0name) + return -EINVAL; + dum = ep_to_dummy (ep); + + spin_lock_irqsave (&dum->lock, flags); + ep->desc = NULL; + retval = 0; + nuke (dum, ep); + spin_unlock_irqrestore (&dum->lock, flags); + + dev_dbg (dummy_dev(dum), "disabled %s\n", _ep->name); + return retval; +} + +static struct usb_request * +dummy_alloc_request (struct usb_ep *_ep, int mem_flags) +{ + struct dummy_ep *ep; + struct dummy_request *req; + + if (!_ep) + return NULL; + ep = usb_ep_to_dummy_ep (_ep); + + req = kmalloc (sizeof *req, mem_flags); + if (!req) + return NULL; + memset (req, 0, sizeof *req); + INIT_LIST_HEAD (&req->queue); + return &req->req; +} + +static void +dummy_free_request (struct usb_ep *_ep, struct usb_request *_req) +{ + struct dummy_ep *ep; + struct dummy_request *req; + + ep = usb_ep_to_dummy_ep (_ep); + if (!ep || !_req || (!ep->desc && _ep->name != ep0name)) + return; + + req = usb_request_to_dummy_request (_req); + WARN_ON (!list_empty (&req->queue)); + kfree (req); +} + +static void * +dummy_alloc_buffer ( + struct usb_ep *_ep, + unsigned bytes, + dma_addr_t *dma, + int mem_flags +) { + char *retval; + struct dummy_ep *ep; + struct dummy *dum; + + ep = usb_ep_to_dummy_ep (_ep); + dum = ep_to_dummy (ep); + + if (!dum->driver) + return NULL; + retval = kmalloc (bytes, mem_flags); + *dma = (dma_addr_t) retval; + return retval; +} + +static void +dummy_free_buffer ( + struct usb_ep *_ep, + void *buf, + dma_addr_t dma, + unsigned bytes +) { + if (bytes) + kfree (buf); +} + +static void +fifo_complete (struct usb_ep *ep, struct usb_request *req) +{ +} + +static int +dummy_queue (struct usb_ep *_ep, struct usb_request *_req, int mem_flags) +{ + struct dummy_ep *ep; + struct dummy_request *req; + struct dummy *dum; + unsigned long flags; + + req = usb_request_to_dummy_request (_req); + if (!_req || !list_empty (&req->queue) || !_req->complete) + return -EINVAL; + + ep = usb_ep_to_dummy_ep (_ep); + if (!_ep || (!ep->desc && _ep->name != ep0name)) + return -EINVAL; + + dum = ep_to_dummy (ep); + if (!dum->driver || !is_enabled (dum)) + return -ESHUTDOWN; + +#if 0 + dev_dbg (dummy_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n", + ep, _req, _ep->name, _req->length, _req->buf); +#endif + + _req->status = -EINPROGRESS; + _req->actual = 0; + spin_lock_irqsave (&dum->lock, flags); + + /* implement an emulated single-request FIFO */ + if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && + list_empty (&dum->fifo_req.queue) && + list_empty (&ep->queue) && + _req->length <= FIFO_SIZE) { + req = &dum->fifo_req; + req->req = *_req; + req->req.buf = dum->fifo_buf; + memcpy (dum->fifo_buf, _req->buf, _req->length); + req->req.context = dum; + req->req.complete = fifo_complete; + + spin_unlock (&dum->lock); + _req->actual = _req->length; + _req->status = 0; + _req->complete (_ep, _req); + spin_lock (&dum->lock); + } + list_add_tail (&req->queue, &ep->queue); + spin_unlock_irqrestore (&dum->lock, flags); + + /* real hardware would likely enable transfers here, in case + * it'd been left NAKing. + */ + return 0; +} + +static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) +{ + struct dummy_ep *ep; + struct dummy *dum; + int retval = -EINVAL; + unsigned long flags; + struct dummy_request *req = NULL; + + if (!_ep || !_req) + return retval; + ep = usb_ep_to_dummy_ep (_ep); + dum = ep_to_dummy (ep); + + if (!dum->driver) + return -ESHUTDOWN; + + spin_lock_irqsave (&dum->lock, flags); + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) { + list_del_init (&req->queue); + _req->status = -ECONNRESET; + retval = 0; + break; + } + } + spin_unlock_irqrestore (&dum->lock, flags); + + if (retval == 0) { + dev_dbg (dummy_dev(dum), + "dequeued req %p from %s, len %d buf %p\n", + req, _ep->name, _req->length, _req->buf); + _req->complete (_ep, _req); + } + return retval; +} + +static int +dummy_set_halt (struct usb_ep *_ep, int value) +{ + struct dummy_ep *ep; + struct dummy *dum; + + if (!_ep) + return -EINVAL; + ep = usb_ep_to_dummy_ep (_ep); + dum = ep_to_dummy (ep); + if (!dum->driver) + return -ESHUTDOWN; + if (!value) + ep->halted = 0; + else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && + !list_empty (&ep->queue)) + return -EAGAIN; + else + ep->halted = 1; + /* FIXME clear emulated data toggle too */ + return 0; +} + +static const struct usb_ep_ops dummy_ep_ops = { + .enable = dummy_enable, + .disable = dummy_disable, + + .alloc_request = dummy_alloc_request, + .free_request = dummy_free_request, + + .alloc_buffer = dummy_alloc_buffer, + .free_buffer = dummy_free_buffer, + /* map, unmap, ... eventually hook the "generic" dma calls */ + + .queue = dummy_queue, + .dequeue = dummy_dequeue, + + .set_halt = dummy_set_halt, +}; + +/*-------------------------------------------------------------------------*/ + +/* there are both host and device side versions of this call ... */ +static int dummy_g_get_frame (struct usb_gadget *_gadget) +{ + struct timeval tv; + + do_gettimeofday (&tv); + return tv.tv_usec / 1000; +} + +static int dummy_wakeup (struct usb_gadget *_gadget) +{ + struct dummy *dum; + + dum = gadget_to_dummy (_gadget); + if ((dum->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) == 0 + || !(dum->port_status & (1 << USB_PORT_FEAT_SUSPEND))) + return -EINVAL; + + /* hub notices our request, issues downstream resume, etc */ + dum->resuming = 1; + dum->port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); + return 0; +} + +static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value) +{ + struct dummy *dum; + + dum = gadget_to_dummy (_gadget); + if (value) + dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED); + else + dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + return 0; +} + +static const struct usb_gadget_ops dummy_ops = { + .get_frame = dummy_g_get_frame, + .wakeup = dummy_wakeup, + .set_selfpowered = dummy_set_selfpowered, +}; + +/*-------------------------------------------------------------------------*/ + +/* "function" sysfs attribute */ +static ssize_t +show_function (struct device *dev, char *buf) +{ + struct dummy *dum = gadget_dev_to_dummy (dev); + + if (!dum->driver || !dum->driver->function) + return 0; + return scnprintf (buf, PAGE_SIZE, "%s\n", dum->driver->function); +} +DEVICE_ATTR (function, S_IRUGO, show_function, NULL); + +/*-------------------------------------------------------------------------*/ + +/* + * Driver registration/unregistration. + * + * This is basically hardware-specific; there's usually only one real USB + * device (not host) controller since that's how USB devices are intended + * to work. So most implementations of these api calls will rely on the + * fact that only one driver will ever bind to the hardware. But curious + * hardware can be built with discrete components, so the gadget API doesn't + * require that assumption. + * + * For this emulator, it might be convenient to create a usb slave device + * for each driver that registers: just add to a big root hub. + */ + +static void +dummy_udc_release (struct device *dev) +{ +} + +static void +dummy_pdev_release (struct device *dev) +{ +} + +static int +dummy_register_udc (struct dummy *dum) +{ + int rc; + + strcpy (dum->gadget.dev.bus_id, "udc"); + dum->gadget.dev.parent = dummy_dev(dum); + dum->gadget.dev.release = dummy_udc_release; + + rc = device_register (&dum->gadget.dev); + if (rc == 0) + device_create_file (&dum->gadget.dev, &dev_attr_function); + return rc; +} + +static void +dummy_unregister_udc (struct dummy *dum) +{ + device_remove_file (&dum->gadget.dev, &dev_attr_function); + device_unregister (&dum->gadget.dev); +} + +int +usb_gadget_register_driver (struct usb_gadget_driver *driver) +{ + struct dummy *dum = the_controller; + int retval, i; + + if (!dum) + return -EINVAL; + if (dum->driver) + return -EBUSY; + if (!driver->bind || !driver->unbind || !driver->setup + || driver->speed == USB_SPEED_UNKNOWN) + return -EINVAL; + + /* + * SLAVE side init ... the layer above hardware, which + * can't enumerate without help from the driver we're binding. + */ + dum->gadget.name = gadget_name; + dum->gadget.ops = &dummy_ops; + dum->gadget.is_dualspeed = 1; + + dum->devstatus = 0; + dum->resuming = 0; + + INIT_LIST_HEAD (&dum->gadget.ep_list); + for (i = 0; i < DUMMY_ENDPOINTS; i++) { + struct dummy_ep *ep = &dum->ep [i]; + + if (!ep_name [i]) + break; + ep->ep.name = ep_name [i]; + ep->ep.ops = &dummy_ep_ops; + list_add_tail (&ep->ep.ep_list, &dum->gadget.ep_list); + ep->halted = ep->already_seen = ep->setup_stage = 0; + ep->ep.maxpacket = ~0; + ep->last_io = jiffies; + ep->gadget = &dum->gadget; + ep->desc = NULL; + INIT_LIST_HEAD (&ep->queue); + } + + dum->gadget.ep0 = &dum->ep [0].ep; + dum->ep [0].ep.maxpacket = 64; + list_del_init (&dum->ep [0].ep.ep_list); + INIT_LIST_HEAD(&dum->fifo_req.queue); + + dum->driver = driver; + dum->gadget.dev.driver = &driver->driver; + dev_dbg (dummy_dev(dum), "binding gadget driver '%s'\n", + driver->driver.name); + if ((retval = driver->bind (&dum->gadget)) != 0) { + dum->driver = NULL; + dum->gadget.dev.driver = NULL; + return retval; + } + + // FIXME: Check these calls for errors and re-order + driver->driver.bus = dum->gadget.dev.parent->bus; + driver_register (&driver->driver); + + device_bind_driver (&dum->gadget.dev); + + /* khubd will enumerate this in a while */ + dum->port_status |= USB_PORT_STAT_CONNECTION + | (1 << USB_PORT_FEAT_C_CONNECTION); + return 0; +} +EXPORT_SYMBOL (usb_gadget_register_driver); + +/* caller must hold lock */ +static void +stop_activity (struct dummy *dum, struct usb_gadget_driver *driver) +{ + struct dummy_ep *ep; + + /* prevent any more requests */ + dum->address = 0; + + /* The timer is left running so that outstanding URBs can fail */ + + /* nuke any pending requests first, so driver i/o is quiesced */ + list_for_each_entry (ep, &dum->gadget.ep_list, ep.ep_list) + nuke (dum, ep); + + /* driver now does any non-usb quiescing necessary */ + if (driver) { + spin_unlock (&dum->lock); + driver->disconnect (&dum->gadget); + spin_lock (&dum->lock); + } +} + +int +usb_gadget_unregister_driver (struct usb_gadget_driver *driver) +{ + struct dummy *dum = the_controller; + unsigned long flags; + + if (!dum) + return -ENODEV; + if (!driver || driver != dum->driver) + return -EINVAL; + + dev_dbg (dummy_dev(dum), "unregister gadget driver '%s'\n", + driver->driver.name); + + spin_lock_irqsave (&dum->lock, flags); + stop_activity (dum, driver); + dum->port_status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | + USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); + dum->port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); + spin_unlock_irqrestore (&dum->lock, flags); + + driver->unbind (&dum->gadget); + dum->driver = NULL; + + device_release_driver (&dum->gadget.dev); + + driver_unregister (&driver->driver); + + return 0; +} +EXPORT_SYMBOL (usb_gadget_unregister_driver); + +#undef is_enabled + +int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode) +{ + return -ENOSYS; +} +EXPORT_SYMBOL (net2280_set_fifo_mode); + +/*-------------------------------------------------------------------------*/ + +/* MASTER/HOST SIDE DRIVER + * + * this uses the hcd framework to hook up to host side drivers. + * its root hub will only have one device, otherwise it acts like + * a normal host controller. + * + * when urbs are queued, they're just stuck on a list that we + * scan in a timer callback. that callback connects writes from + * the host with reads from the device, and so on, based on the + * usb 2.0 rules. + */ + +static int dummy_urb_enqueue ( + struct usb_hcd *hcd, + struct usb_host_endpoint *ep, + struct urb *urb, + int mem_flags +) { + struct dummy *dum; + struct urbp *urbp; + unsigned long flags; + + if (!urb->transfer_buffer && urb->transfer_buffer_length) + return -EINVAL; + + urbp = kmalloc (sizeof *urbp, mem_flags); + if (!urbp) + return -ENOMEM; + urbp->urb = urb; + + dum = hcd_to_dummy (hcd); + spin_lock_irqsave (&dum->lock, flags); + + if (!dum->udev) { + dum->udev = urb->dev; + usb_get_dev (dum->udev); + } else if (unlikely (dum->udev != urb->dev)) + dev_err (dummy_dev(dum), "usb_device address has changed!\n"); + + list_add_tail (&urbp->urbp_list, &dum->urbp_list); + urb->hcpriv = urbp; + if (usb_pipetype (urb->pipe) == PIPE_CONTROL) + urb->error_count = 1; /* mark as a new urb */ + + /* kick the scheduler, it'll do the rest */ + if (!timer_pending (&dum->timer)) + mod_timer (&dum->timer, jiffies + 1); + + spin_unlock_irqrestore (&dum->lock, flags); + return 0; +} + +static int dummy_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) +{ + /* giveback happens automatically in timer callback */ + return 0; +} + +static void maybe_set_status (struct urb *urb, int status) +{ + spin_lock (&urb->lock); + if (urb->status == -EINPROGRESS) + urb->status = status; + spin_unlock (&urb->lock); +} + +/* transfer up to a frame's worth; caller must own lock */ +static int +transfer (struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit) +{ + struct dummy_request *req; + +top: + /* if there's no request queued, the device is NAKing; return */ + list_for_each_entry (req, &ep->queue, queue) { + unsigned host_len, dev_len, len; + int is_short, to_host; + int rescan = 0; + + /* 1..N packets of ep->ep.maxpacket each ... the last one + * may be short (including zero length). + * + * writer can send a zlp explicitly (length 0) or implicitly + * (length mod maxpacket zero, and 'zero' flag); they always + * terminate reads. + */ + host_len = urb->transfer_buffer_length - urb->actual_length; + dev_len = req->req.length - req->req.actual; + len = min (host_len, dev_len); + + /* FIXME update emulated data toggle too */ + + to_host = usb_pipein (urb->pipe); + if (unlikely (len == 0)) + is_short = 1; + else { + char *ubuf, *rbuf; + + /* not enough bandwidth left? */ + if (limit < ep->ep.maxpacket && limit < len) + break; + len = min (len, (unsigned) limit); + if (len == 0) + break; + + /* use an extra pass for the final short packet */ + if (len > ep->ep.maxpacket) { + rescan = 1; + len -= (len % ep->ep.maxpacket); + } + is_short = (len % ep->ep.maxpacket) != 0; + + /* else transfer packet(s) */ + ubuf = urb->transfer_buffer + urb->actual_length; + rbuf = req->req.buf + req->req.actual; + if (to_host) + memcpy (ubuf, rbuf, len); + else + memcpy (rbuf, ubuf, len); + ep->last_io = jiffies; + + limit -= len; + urb->actual_length += len; + req->req.actual += len; + } + + /* short packets terminate, maybe with overflow/underflow. + * it's only really an error to write too much. + * + * partially filling a buffer optionally blocks queue advances + * (so completion handlers can clean up the queue) but we don't + * need to emulate such data-in-flight. so we only show part + * of the URB_SHORT_NOT_OK effect: completion status. + */ + if (is_short) { + if (host_len == dev_len) { + req->req.status = 0; + maybe_set_status (urb, 0); + } else if (to_host) { + req->req.status = 0; + if (dev_len > host_len) + maybe_set_status (urb, -EOVERFLOW); + else + maybe_set_status (urb, + (urb->transfer_flags + & URB_SHORT_NOT_OK) + ? -EREMOTEIO : 0); + } else if (!to_host) { + maybe_set_status (urb, 0); + if (host_len > dev_len) + req->req.status = -EOVERFLOW; + else + req->req.status = 0; + } + + /* many requests terminate without a short packet */ + } else { + if (req->req.length == req->req.actual + && !req->req.zero) + req->req.status = 0; + if (urb->transfer_buffer_length == urb->actual_length + && !(urb->transfer_flags + & URB_ZERO_PACKET)) { + maybe_set_status (urb, 0); + } + } + + /* device side completion --> continuable */ + if (req->req.status != -EINPROGRESS) { + list_del_init (&req->queue); + + spin_unlock (&dum->lock); + req->req.complete (&ep->ep, &req->req); + spin_lock (&dum->lock); + + /* requests might have been unlinked... */ + rescan = 1; + } + + /* host side completion --> terminate */ + if (urb->status != -EINPROGRESS) + break; + + /* rescan to continue with any other queued i/o */ + if (rescan) + goto top; + } + return limit; +} + +static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep) +{ + int limit = ep->ep.maxpacket; + + if (dum->gadget.speed == USB_SPEED_HIGH) { + int tmp; + + /* high bandwidth mode */ + tmp = le16_to_cpu(ep->desc->wMaxPacketSize); + tmp = le16_to_cpu (tmp); + tmp = (tmp >> 11) & 0x03; + tmp *= 8 /* applies to entire frame */; + limit += limit * tmp; + } + return limit; +} + +#define is_active(dum) ((dum->port_status & \ + (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \ + USB_PORT_STAT_SUSPEND)) \ + == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) + +static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address) +{ + int i; + + if (!is_active (dum)) + return NULL; + if ((address & ~USB_DIR_IN) == 0) + return &dum->ep [0]; + for (i = 1; i < DUMMY_ENDPOINTS; i++) { + struct dummy_ep *ep = &dum->ep [i]; + + if (!ep->desc) + continue; + if (ep->desc->bEndpointAddress == address) + return ep; + } + return NULL; +} + +#undef is_active + +#define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE) +#define Dev_InRequest (Dev_Request | USB_DIR_IN) +#define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE) +#define Intf_InRequest (Intf_Request | USB_DIR_IN) +#define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT) +#define Ep_InRequest (Ep_Request | USB_DIR_IN) + +/* drive both sides of the transfers; looks like irq handlers to + * both drivers except the callbacks aren't in_irq(). + */ +static void dummy_timer (unsigned long _dum) +{ + struct dummy *dum = (struct dummy *) _dum; + struct urbp *urbp, *tmp; + unsigned long flags; + int limit, total; + int i; + + /* simplistic model for one frame's bandwidth */ + switch (dum->gadget.speed) { + case USB_SPEED_LOW: + total = 8/*bytes*/ * 12/*packets*/; + break; + case USB_SPEED_FULL: + total = 64/*bytes*/ * 19/*packets*/; + break; + case USB_SPEED_HIGH: + total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/; + break; + default: + dev_err (dummy_dev(dum), "bogus device speed\n"); + return; + } + + /* FIXME if HZ != 1000 this will probably misbehave ... */ + + /* look at each urb queued by the host side driver */ + spin_lock_irqsave (&dum->lock, flags); + + if (!dum->udev) { + dev_err (dummy_dev(dum), + "timer fired with no URBs pending?\n"); + spin_unlock_irqrestore (&dum->lock, flags); + return; + } + + for (i = 0; i < DUMMY_ENDPOINTS; i++) { + if (!ep_name [i]) + break; + dum->ep [i].already_seen = 0; + } + +restart: + list_for_each_entry_safe (urbp, tmp, &dum->urbp_list, urbp_list) { + struct urb *urb; + struct dummy_request *req; + u8 address; + struct dummy_ep *ep = NULL; + int type; + + urb = urbp->urb; + if (urb->status != -EINPROGRESS) { + /* likely it was just unlinked */ + goto return_urb; + } + type = usb_pipetype (urb->pipe); + + /* used up this frame's non-periodic bandwidth? + * FIXME there's infinite bandwidth for control and + * periodic transfers ... unrealistic. + */ + if (total <= 0 && type == PIPE_BULK) + continue; + + /* find the gadget's ep for this request (if configured) */ + address = usb_pipeendpoint (urb->pipe); + if (usb_pipein (urb->pipe)) + address |= USB_DIR_IN; + ep = find_endpoint(dum, address); + if (!ep) { + /* set_configuration() disagreement */ + dev_dbg (dummy_dev(dum), + "no ep configured for urb %p\n", + urb); + maybe_set_status (urb, -EPROTO); + goto return_urb; + } + + if (ep->already_seen) + continue; + ep->already_seen = 1; + if (ep == &dum->ep [0] && urb->error_count) { + ep->setup_stage = 1; /* a new urb */ + urb->error_count = 0; + } + if (ep->halted && !ep->setup_stage) { + /* NOTE: must not be iso! */ + dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n", + ep->ep.name, urb); + maybe_set_status (urb, -EPIPE); + goto return_urb; + } + /* FIXME make sure both ends agree on maxpacket */ + + /* handle control requests */ + if (ep == &dum->ep [0] && ep->setup_stage) { + struct usb_ctrlrequest setup; + int value = 1; + struct dummy_ep *ep2; + + setup = *(struct usb_ctrlrequest*) urb->setup_packet; + le16_to_cpus (&setup.wIndex); + le16_to_cpus (&setup.wValue); + le16_to_cpus (&setup.wLength); + if (setup.wLength != urb->transfer_buffer_length) { + maybe_set_status (urb, -EOVERFLOW); + goto return_urb; + } + + /* paranoia, in case of stale queued data */ + list_for_each_entry (req, &ep->queue, queue) { + list_del_init (&req->queue); + req->req.status = -EOVERFLOW; + dev_dbg (dummy_dev(dum), "stale req = %p\n", + req); + + spin_unlock (&dum->lock); + req->req.complete (&ep->ep, &req->req); + spin_lock (&dum->lock); + ep->already_seen = 0; + goto restart; + } + + /* gadget driver never sees set_address or operations + * on standard feature flags. some hardware doesn't + * even expose them. + */ + ep->last_io = jiffies; + ep->setup_stage = 0; + ep->halted = 0; + switch (setup.bRequest) { + case USB_REQ_SET_ADDRESS: + if (setup.bRequestType != Dev_Request) + break; + dum->address = setup.wValue; + maybe_set_status (urb, 0); + dev_dbg (dummy_dev(dum), "set_address = %d\n", + setup.wValue); + value = 0; + break; + case USB_REQ_SET_FEATURE: + if (setup.bRequestType == Dev_Request) { + value = 0; + switch (setup.wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + break; + default: + value = -EOPNOTSUPP; + } + if (value == 0) { + dum->devstatus |= + (1 << setup.wValue); + maybe_set_status (urb, 0); + } + + } else if (setup.bRequestType == Ep_Request) { + // endpoint halt + ep2 = find_endpoint (dum, + setup.wIndex); + if (!ep2) { + value = -EOPNOTSUPP; + break; + } + ep2->halted = 1; + value = 0; + maybe_set_status (urb, 0); + } + break; + case USB_REQ_CLEAR_FEATURE: + if (setup.bRequestType == Dev_Request) { + switch (setup.wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + dum->devstatus &= ~(1 << + USB_DEVICE_REMOTE_WAKEUP); + value = 0; + maybe_set_status (urb, 0); + break; + default: + value = -EOPNOTSUPP; + break; + } + } else if (setup.bRequestType == Ep_Request) { + // endpoint halt + ep2 = find_endpoint (dum, + setup.wIndex); + if (!ep2) { + value = -EOPNOTSUPP; + break; + } + ep2->halted = 0; + value = 0; + maybe_set_status (urb, 0); + } + break; + case USB_REQ_GET_STATUS: + if (setup.bRequestType == Dev_InRequest + || setup.bRequestType + == Intf_InRequest + || setup.bRequestType + == Ep_InRequest + ) { + char *buf; + + // device: remote wakeup, selfpowered + // interface: nothing + // endpoint: halt + buf = (char *)urb->transfer_buffer; + if (urb->transfer_buffer_length > 0) { + if (setup.bRequestType == + Ep_InRequest) { + ep2 = find_endpoint (dum, setup.wIndex); + if (!ep2) { + value = -EOPNOTSUPP; + break; + } + buf [0] = ep2->halted; + } else if (setup.bRequestType == + Dev_InRequest) { + buf [0] = (u8) + dum->devstatus; + } else + buf [0] = 0; + } + if (urb->transfer_buffer_length > 1) + buf [1] = 0; + urb->actual_length = min (2, + urb->transfer_buffer_length); + value = 0; + maybe_set_status (urb, 0); + } + break; + } + + /* gadget driver handles all other requests. block + * until setup() returns; no reentrancy issues etc. + */ + if (value > 0) { + spin_unlock (&dum->lock); + value = dum->driver->setup (&dum->gadget, + &setup); + spin_lock (&dum->lock); + + if (value >= 0) { + /* no delays (max 64KB data stage) */ + limit = 64*1024; + goto treat_control_like_bulk; + } + /* error, see below */ + } + + if (value < 0) { + if (value != -EOPNOTSUPP) + dev_dbg (dummy_dev(dum), + "setup --> %d\n", + value); + maybe_set_status (urb, -EPIPE); + urb->actual_length = 0; + } + + goto return_urb; + } + + /* non-control requests */ + limit = total; + switch (usb_pipetype (urb->pipe)) { + case PIPE_ISOCHRONOUS: + /* FIXME is it urb->interval since the last xfer? + * use urb->iso_frame_desc[i]. + * complete whether or not ep has requests queued. + * report random errors, to debug drivers. + */ + limit = max (limit, periodic_bytes (dum, ep)); + maybe_set_status (urb, -ENOSYS); + break; + + case PIPE_INTERRUPT: + /* FIXME is it urb->interval since the last xfer? + * this almost certainly polls too fast. + */ + limit = max (limit, periodic_bytes (dum, ep)); + /* FALLTHROUGH */ + + // case PIPE_BULK: case PIPE_CONTROL: + default: + treat_control_like_bulk: + ep->last_io = jiffies; + total = transfer (dum, urb, ep, limit); + break; + } + + /* incomplete transfer? */ + if (urb->status == -EINPROGRESS) + continue; + +return_urb: + urb->hcpriv = NULL; + list_del (&urbp->urbp_list); + kfree (urbp); + if (ep) + ep->already_seen = ep->setup_stage = 0; + + spin_unlock (&dum->lock); + usb_hcd_giveback_urb (dummy_to_hcd(dum), urb, NULL); + spin_lock (&dum->lock); + + goto restart; + } + + /* want a 1 msec delay here */ + if (!list_empty (&dum->urbp_list)) + mod_timer (&dum->timer, jiffies + msecs_to_jiffies(1)); + else { + usb_put_dev (dum->udev); + dum->udev = NULL; + } + + spin_unlock_irqrestore (&dum->lock, flags); +} + +/*-------------------------------------------------------------------------*/ + +#define PORT_C_MASK \ + ((1 << USB_PORT_FEAT_C_CONNECTION) \ + | (1 << USB_PORT_FEAT_C_ENABLE) \ + | (1 << USB_PORT_FEAT_C_SUSPEND) \ + | (1 << USB_PORT_FEAT_C_OVER_CURRENT) \ + | (1 << USB_PORT_FEAT_C_RESET)) + +static int dummy_hub_status (struct usb_hcd *hcd, char *buf) +{ + struct dummy *dum; + unsigned long flags; + int retval; + + dum = hcd_to_dummy (hcd); + + spin_lock_irqsave (&dum->lock, flags); + if (!(dum->port_status & PORT_C_MASK)) + retval = 0; + else { + *buf = (1 << 1); + dev_dbg (dummy_dev(dum), "port status 0x%08x has changes\n", + dum->port_status); + retval = 1; + } + spin_unlock_irqrestore (&dum->lock, flags); + return retval; +} + +static inline void +hub_descriptor (struct usb_hub_descriptor *desc) +{ + memset (desc, 0, sizeof *desc); + desc->bDescriptorType = 0x29; + desc->bDescLength = 9; + desc->wHubCharacteristics = __constant_cpu_to_le16 (0x0001); + desc->bNbrPorts = 1; + desc->bitmap [0] = 0xff; + desc->bitmap [1] = 0xff; +} + +static int dummy_hub_control ( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) { + struct dummy *dum; + int retval = 0; + unsigned long flags; + + dum = hcd_to_dummy (hcd); + spin_lock_irqsave (&dum->lock, flags); + switch (typeReq) { + case ClearHubFeature: + break; + case ClearPortFeature: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + if (dum->port_status & (1 << USB_PORT_FEAT_SUSPEND)) { + /* 20msec resume signaling */ + dum->resuming = 1; + dum->re_timeout = jiffies + + msecs_to_jiffies(20); + } + break; + case USB_PORT_FEAT_POWER: + dum->port_status = 0; + dum->resuming = 0; + stop_activity(dum, dum->driver); + break; + default: + dum->port_status &= ~(1 << wValue); + } + break; + case GetHubDescriptor: + hub_descriptor ((struct usb_hub_descriptor *) buf); + break; + case GetHubStatus: + *(u32 *) buf = __constant_cpu_to_le32 (0); + break; + case GetPortStatus: + if (wIndex != 1) + retval = -EPIPE; + + /* whoever resets or resumes must GetPortStatus to + * complete it!! + */ + if (dum->resuming && time_after (jiffies, dum->re_timeout)) { + dum->port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); + dum->port_status &= ~(1 << USB_PORT_FEAT_SUSPEND); + dum->resuming = 0; + dum->re_timeout = 0; + if (dum->driver && dum->driver->resume) { + spin_unlock (&dum->lock); + dum->driver->resume (&dum->gadget); + spin_lock (&dum->lock); + } + } + if ((dum->port_status & (1 << USB_PORT_FEAT_RESET)) != 0 + && time_after (jiffies, dum->re_timeout)) { + dum->port_status |= (1 << USB_PORT_FEAT_C_RESET); + dum->port_status &= ~(1 << USB_PORT_FEAT_RESET); + dum->re_timeout = 0; + if (dum->driver) { + dum->port_status |= USB_PORT_STAT_ENABLE; + /* give it the best speed we agree on */ + dum->gadget.speed = dum->driver->speed; + dum->gadget.ep0->maxpacket = 64; + switch (dum->gadget.speed) { + case USB_SPEED_HIGH: + dum->port_status |= + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_LOW: + dum->gadget.ep0->maxpacket = 8; + dum->port_status |= + USB_PORT_STAT_LOW_SPEED; + break; + default: + dum->gadget.speed = USB_SPEED_FULL; + break; + } + } + } + ((u16 *) buf)[0] = cpu_to_le16 (dum->port_status); + ((u16 *) buf)[1] = cpu_to_le16 (dum->port_status >> 16); + break; + case SetHubFeature: + retval = -EPIPE; + break; + case SetPortFeature: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + if ((dum->port_status & (1 << USB_PORT_FEAT_SUSPEND)) + == 0) { + dum->port_status |= + (1 << USB_PORT_FEAT_SUSPEND); + if (dum->driver && dum->driver->suspend) { + spin_unlock (&dum->lock); + dum->driver->suspend (&dum->gadget); + spin_lock (&dum->lock); + } + } + break; + case USB_PORT_FEAT_RESET: + /* if it's already running, disconnect first */ + if (dum->port_status & USB_PORT_STAT_ENABLE) { + dum->port_status &= ~(USB_PORT_STAT_ENABLE + | USB_PORT_STAT_LOW_SPEED + | USB_PORT_STAT_HIGH_SPEED); + if (dum->driver) { + dev_dbg (dummy_dev(dum), + "disconnect\n"); + stop_activity (dum, dum->driver); + } + + /* FIXME test that code path! */ + } + /* 50msec reset signaling */ + dum->re_timeout = jiffies + msecs_to_jiffies(50); + /* FALLTHROUGH */ + default: + dum->port_status |= (1 << wValue); + } + break; + + default: + dev_dbg (dummy_dev(dum), + "hub control req%04x v%04x i%04x l%d\n", + typeReq, wValue, wIndex, wLength); + + /* "protocol stall" on error */ + retval = -EPIPE; + } + spin_unlock_irqrestore (&dum->lock, flags); + return retval; +} + + +/*-------------------------------------------------------------------------*/ + +static inline ssize_t +show_urb (char *buf, size_t size, struct urb *urb) +{ + int ep = usb_pipeendpoint (urb->pipe); + + return snprintf (buf, size, + "urb/%p %s ep%d%s%s len %d/%d\n", + urb, + ({ char *s; + switch (urb->dev->speed) { + case USB_SPEED_LOW: s = "ls"; break; + case USB_SPEED_FULL: s = "fs"; break; + case USB_SPEED_HIGH: s = "hs"; break; + default: s = "?"; break; + }; s; }), + ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "", + ({ char *s; \ + switch (usb_pipetype (urb->pipe)) { \ + case PIPE_CONTROL: s = ""; break; \ + case PIPE_BULK: s = "-bulk"; break; \ + case PIPE_INTERRUPT: s = "-int"; break; \ + default: s = "-iso"; break; \ + }; s;}), + urb->actual_length, urb->transfer_buffer_length); +} + +static ssize_t +show_urbs (struct device *dev, char *buf) +{ + struct usb_hcd *hcd = dev_get_drvdata (dev); + struct dummy *dum = hcd_to_dummy (hcd); + struct urbp *urbp; + size_t size = 0; + unsigned long flags; + + spin_lock_irqsave (&dum->lock, flags); + list_for_each_entry (urbp, &dum->urbp_list, urbp_list) { + size_t temp; + + temp = show_urb (buf, PAGE_SIZE - size, urbp->urb); + buf += temp; + size += temp; + } + spin_unlock_irqrestore (&dum->lock, flags); + + return size; +} +static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL); + +static int dummy_start (struct usb_hcd *hcd) +{ + struct dummy *dum; + struct usb_device *root; + int retval; + + dum = hcd_to_dummy (hcd); + + /* + * MASTER side init ... we emulate a root hub that'll only ever + * talk to one device (the slave side). Also appears in sysfs, + * just like more familiar pci-based HCDs. + */ + spin_lock_init (&dum->lock); + init_timer (&dum->timer); + dum->timer.function = dummy_timer; + dum->timer.data = (unsigned long) dum; + + INIT_LIST_HEAD (&dum->urbp_list); + + root = usb_alloc_dev (NULL, &hcd->self, 0); + if (!root) + return -ENOMEM; + + /* root hub enters addressed state... */ + hcd->state = HC_STATE_RUNNING; + root->speed = USB_SPEED_HIGH; + + /* ...then configured, so khubd sees us. */ + if ((retval = usb_hcd_register_root_hub (root, hcd)) != 0) { + goto err1; + } + + /* only show a low-power port: just 8mA */ + hub_set_power_budget (root, 8); + + if ((retval = dummy_register_udc (dum)) != 0) + goto err2; + + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ + device_create_file (dummy_dev(dum), &dev_attr_urbs); + return 0; + + err2: + usb_disconnect (&hcd->self.root_hub); + err1: + usb_put_dev (root); + hcd->state = HC_STATE_QUIESCING; + return retval; +} + +static void dummy_stop (struct usb_hcd *hcd) +{ + struct dummy *dum; + + dum = hcd_to_dummy (hcd); + + device_remove_file (dummy_dev(dum), &dev_attr_urbs); + + usb_gadget_unregister_driver (dum->driver); + dummy_unregister_udc (dum); + + dev_info (dummy_dev(dum), "stopped\n"); +} + +/*-------------------------------------------------------------------------*/ + +static int dummy_h_get_frame (struct usb_hcd *hcd) +{ + return dummy_g_get_frame (NULL); +} + +static const struct hc_driver dummy_hcd = { + .description = (char *) driver_name, + .product_desc = "Dummy host controller", + .hcd_priv_size = sizeof(struct dummy), + + .flags = HCD_USB2, + + .start = dummy_start, + .stop = dummy_stop, + + .urb_enqueue = dummy_urb_enqueue, + .urb_dequeue = dummy_urb_dequeue, + + .get_frame_number = dummy_h_get_frame, + + .hub_status_data = dummy_hub_status, + .hub_control = dummy_hub_control, +}; + +static int dummy_probe (struct device *dev) +{ + struct usb_hcd *hcd; + int retval; + + dev_info (dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + + hcd = usb_create_hcd (&dummy_hcd, dev, dev->bus_id); + if (!hcd) + return -ENOMEM; + the_controller = hcd_to_dummy (hcd); + + retval = usb_add_hcd(hcd, 0, 0); + if (retval != 0) { + usb_put_hcd (hcd); + the_controller = NULL; + } + return retval; +} + +static void dummy_remove (struct device *dev) +{ + struct usb_hcd *hcd; + + hcd = dev_get_drvdata (dev); + usb_remove_hcd (hcd); + usb_put_hcd (hcd); + the_controller = NULL; +} + +/*-------------------------------------------------------------------------*/ + +static int dummy_pdev_detect (void) +{ + int retval; + + retval = driver_register (&dummy_driver); + if (retval < 0) + return retval; + + the_pdev.name = "hc"; + the_pdev.dev.driver = &dummy_driver; + the_pdev.dev.release = dummy_pdev_release; + + retval = platform_device_register (&the_pdev); + if (retval < 0) + driver_unregister (&dummy_driver); + return retval; +} + +static void dummy_pdev_remove (void) +{ + platform_device_unregister (&the_pdev); + driver_unregister (&dummy_driver); +} + +/*-------------------------------------------------------------------------*/ + +static int __init init (void) +{ + int retval; + + if (usb_disabled ()) + return -ENODEV; + if ((retval = dummy_pdev_detect ()) != 0) + return retval; + if ((retval = dummy_probe (&the_pdev.dev)) != 0) + dummy_pdev_remove (); + return retval; +} +module_init (init); + +static void __exit cleanup (void) +{ + dummy_remove (&the_pdev.dev); + dummy_pdev_remove (); +} +module_exit (cleanup); diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c new file mode 100644 index 0000000..f7c6d75 --- /dev/null +++ b/drivers/usb/gadget/epautoconf.c @@ -0,0 +1,310 @@ +/* + * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers + * + * Copyright (C) 2004 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/device.h> + +#include <linux/ctype.h> +#include <linux/string.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +#include "gadget_chips.h" + + +/* we must assign addresses for configurable endpoints (like net2280) */ +static __initdata unsigned epnum; + +// #define MANY_ENDPOINTS +#ifdef MANY_ENDPOINTS +/* more than 15 configurable endpoints */ +static __initdata unsigned in_epnum; +#endif + + +/* + * This should work with endpoints from controller drivers sharing the + * same endpoint naming convention. By example: + * + * - ep1, ep2, ... address is fixed, not direction or type + * - ep1in, ep2out, ... address and direction are fixed, not type + * - ep1-bulk, ep2-bulk, ... address and type are fixed, not direction + * - ep1in-bulk, ep2out-iso, ... all three are fixed + * - ep-* ... no functionality restrictions + * + * Type suffixes are "-bulk", "-iso", or "-int". Numbers are decimal. + * Less common restrictions are implied by gadget_is_*(). + * + * NOTE: each endpoint is unidirectional, as specified by its USB + * descriptor; and isn't specific to a configuration or altsetting. + */ +static int __init +ep_matches ( + struct usb_gadget *gadget, + struct usb_ep *ep, + struct usb_endpoint_descriptor *desc +) +{ + u8 type; + const char *tmp; + u16 max; + + /* endpoint already claimed? */ + if (0 != ep->driver_data) + return 0; + + /* only support ep0 for portable CONTROL traffic */ + type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + if (USB_ENDPOINT_XFER_CONTROL == type) + return 0; + + /* some other naming convention */ + if ('e' != ep->name[0]) + return 0; + + /* type-restriction: "-iso", "-bulk", or "-int". + * direction-restriction: "in", "out". + */ + if ('-' != ep->name[2]) { + tmp = strrchr (ep->name, '-'); + if (tmp) { + switch (type) { + case USB_ENDPOINT_XFER_INT: + /* bulk endpoints handle interrupt transfers, + * except the toggle-quirky iso-synch kind + */ + if ('s' == tmp[2]) // == "-iso" + return 0; + /* for now, avoid PXA "interrupt-in"; + * it's documented as never using DATA1. + */ + if (gadget_is_pxa (gadget) + && 'i' == tmp [1]) + return 0; + break; + case USB_ENDPOINT_XFER_BULK: + if ('b' != tmp[1]) // != "-bulk" + return 0; + break; + case USB_ENDPOINT_XFER_ISOC: + if ('s' != tmp[2]) // != "-iso" + return 0; + } + } else { + tmp = ep->name + strlen (ep->name); + } + + /* direction-restriction: "..in-..", "out-.." */ + tmp--; + if (!isdigit (*tmp)) { + if (desc->bEndpointAddress & USB_DIR_IN) { + if ('n' != *tmp) + return 0; + } else { + if ('t' != *tmp) + return 0; + } + } + } + + /* endpoint maxpacket size is an input parameter, except for bulk + * where it's an output parameter representing the full speed limit. + * the usb spec fixes high speed bulk maxpacket at 512 bytes. + */ + max = 0x7ff & le16_to_cpup (&desc->wMaxPacketSize); + switch (type) { + case USB_ENDPOINT_XFER_INT: + /* INT: limit 64 bytes full speed, 1024 high speed */ + if (!gadget->is_dualspeed && max > 64) + return 0; + /* FALLTHROUGH */ + + case USB_ENDPOINT_XFER_ISOC: + /* ISO: limit 1023 bytes full speed, 1024 high speed */ + if (ep->maxpacket < max) + return 0; + if (!gadget->is_dualspeed && max > 1023) + return 0; + + /* BOTH: "high bandwidth" works only at high speed */ + if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) { + if (!gadget->is_dualspeed) + return 0; + /* configure your hardware with enough buffering!! */ + } + break; + } + + /* MATCH!! */ + + /* report address */ + if (isdigit (ep->name [2])) { + u8 num = simple_strtol (&ep->name [2], NULL, 10); + desc->bEndpointAddress |= num; +#ifdef MANY_ENDPOINTS + } else if (desc->bEndpointAddress & USB_DIR_IN) { + if (++in_epnum > 15) + return 0; + desc->bEndpointAddress = USB_DIR_IN | in_epnum; +#endif + } else { + if (++epnum > 15) + return 0; + desc->bEndpointAddress |= epnum; + } + + /* report (variable) full speed bulk maxpacket */ + if (USB_ENDPOINT_XFER_BULK == type) { + int size = ep->maxpacket; + + /* min() doesn't work on bitfields with gcc-3.5 */ + if (size > 64) + size = 64; + desc->wMaxPacketSize = cpu_to_le16(size); + } + return 1; +} + +static struct usb_ep * __init +find_ep (struct usb_gadget *gadget, const char *name) +{ + struct usb_ep *ep; + + list_for_each_entry (ep, &gadget->ep_list, ep_list) { + if (0 == strcmp (ep->name, name)) + return ep; + } + return NULL; +} + +/** + * usb_ep_autoconfig - choose an endpoint matching the descriptor + * @gadget: The device to which the endpoint must belong. + * @desc: Endpoint descriptor, with endpoint direction and transfer mode + * initialized. For periodic transfers, the maximum packet + * size must also be initialized. This is modified on success. + * + * By choosing an endpoint to use with the specified descriptor, this + * routine simplifies writing gadget drivers that work with multiple + * USB device controllers. The endpoint would be passed later to + * usb_ep_enable(), along with some descriptor. + * + * That second descriptor won't always be the same as the first one. + * For example, isochronous endpoints can be autoconfigured for high + * bandwidth, and then used in several lower bandwidth altsettings. + * Also, high and full speed descriptors will be different. + * + * Be sure to examine and test the results of autoconfiguration on your + * hardware. This code may not make the best choices about how to use the + * USB controller, and it can't know all the restrictions that may apply. + * Some combinations of driver and hardware won't be able to autoconfigure. + * + * On success, this returns an un-claimed usb_ep, and modifies the endpoint + * descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value + * is initialized as if the endpoint were used at full speed. To prevent + * the endpoint from being returned by a later autoconfig call, claim it + * by assigning ep->driver_data to some non-null value. + * + * On failure, this returns a null endpoint descriptor. + */ +struct usb_ep * __init usb_ep_autoconfig ( + struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc +) +{ + struct usb_ep *ep; + u8 type; + + type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + /* First, apply chip-specific "best usage" knowledge. + * This might make a good usb_gadget_ops hook ... + */ + if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) { + /* ep-e, ep-f are PIO with only 64 byte fifos */ + ep = find_ep (gadget, "ep-e"); + if (ep && ep_matches (gadget, ep, desc)) + return ep; + ep = find_ep (gadget, "ep-f"); + if (ep && ep_matches (gadget, ep, desc)) + return ep; + + } else if (gadget_is_goku (gadget)) { + if (USB_ENDPOINT_XFER_INT == type) { + /* single buffering is enough */ + ep = find_ep (gadget, "ep3-bulk"); + if (ep && ep_matches (gadget, ep, desc)) + return ep; + } else if (USB_ENDPOINT_XFER_BULK == type + && (USB_DIR_IN & desc->bEndpointAddress)) { + /* DMA may be available */ + ep = find_ep (gadget, "ep2-bulk"); + if (ep && ep_matches (gadget, ep, desc)) + return ep; + } + + } else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) { + /* single buffering is enough; maybe 8 byte fifo is too */ + ep = find_ep (gadget, "ep3in-bulk"); + if (ep && ep_matches (gadget, ep, desc)) + return ep; + + } else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) { + ep = find_ep (gadget, "ep1-bulk"); + if (ep && ep_matches (gadget, ep, desc)) + return ep; + } + + /* Second, look at endpoints until an unclaimed one looks usable */ + list_for_each_entry (ep, &gadget->ep_list, ep_list) { + if (ep_matches (gadget, ep, desc)) + return ep; + } + + /* Fail */ + return NULL; +} + +/** + * usb_ep_autoconfig_reset - reset endpoint autoconfig state + * @gadget: device for which autoconfig state will be reset + * + * Use this for devices where one configuration may need to assign + * endpoint resources very differently from the next one. It clears + * state such as ep->driver_data and the record of assigned endpoints + * used by usb_ep_autoconfig(). + */ +void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget) +{ + struct usb_ep *ep; + + list_for_each_entry (ep, &gadget->ep_list, ep_list) { + ep->driver_data = NULL; + } +#ifdef MANY_ENDPOINTS + in_epnum = 0; +#endif + epnum = 0; +} + diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c new file mode 100644 index 0000000..cff9fb0 --- /dev/null +++ b/drivers/usb/gadget/ether.c @@ -0,0 +1,2660 @@ +/* + * ether.c -- Ethernet gadget driver, with CDC and non-CDC options + * + * Copyright (C) 2003-2005 David Brownell + * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +// #define DEBUG 1 +// #define VERBOSE + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/utsname.h> +#include <linux/device.h> +#include <linux/moduleparam.h> +#include <linux/ctype.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/unaligned.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_cdc.h> +#include <linux/usb_gadget.h> + +#include <linux/random.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> + +#include "gadget_chips.h" + +/*-------------------------------------------------------------------------*/ + +/* + * Ethernet gadget driver -- with CDC and non-CDC options + * Builds on hardware support for a full duplex link. + * + * CDC Ethernet is the standard USB solution for sending Ethernet frames + * using USB. Real hardware tends to use the same framing protocol but look + * different for control features. This driver strongly prefers to use + * this USB-IF standard as its open-systems interoperability solution; + * most host side USB stacks (except from Microsoft) support it. + * + * There's some hardware that can't talk CDC. We make that hardware + * implement a "minimalist" vendor-agnostic CDC core: same framing, but + * link-level setup only requires activating the configuration. + * Linux supports it, but other host operating systems may not. + * (This is a subset of CDC Ethernet.) + * + * A third option is also in use. Rather than CDC Ethernet, or something + * simpler, Microsoft pushes their own approach: RNDIS. The published + * RNDIS specs are ambiguous and appear to be incomplete, and are also + * needlessly complex. + */ + +#define DRIVER_DESC "Ethernet Gadget" +#define DRIVER_VERSION "Equinox 2004" + +static const char shortname [] = "ether"; +static const char driver_desc [] = DRIVER_DESC; + +#define RX_EXTRA 20 /* guard against rx overflows */ + +#ifdef CONFIG_USB_ETH_RNDIS +#include "rndis.h" +#else +#define rndis_init() 0 +#define rndis_exit() do{}while(0) +#endif + +/* CDC and RNDIS support the same host-chosen outgoing packet filters. */ +#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ + |USB_CDC_PACKET_TYPE_DIRECTED) + + +/*-------------------------------------------------------------------------*/ + +struct eth_dev { + spinlock_t lock; + struct usb_gadget *gadget; + struct usb_request *req; /* for control responses */ + struct usb_request *stat_req; /* for cdc & rndis status */ + + u8 config; + struct usb_ep *in_ep, *out_ep, *status_ep; + const struct usb_endpoint_descriptor + *in, *out, *status; + struct list_head tx_reqs, rx_reqs; + + struct net_device *net; + struct net_device_stats stats; + atomic_t tx_qlen; + + struct work_struct work; + unsigned zlp:1; + unsigned cdc:1; + unsigned rndis:1; + unsigned suspended:1; + u16 cdc_filter; + unsigned long todo; +#define WORK_RX_MEMORY 0 + int rndis_config; + u8 host_mac [ETH_ALEN]; +}; + +/* This version autoconfigures as much as possible at run-time. + * + * It also ASSUMES a self-powered device, without remote wakeup, + * although remote wakeup support would make sense. + */ +static const char *EP_IN_NAME; +static const char *EP_OUT_NAME; +static const char *EP_STATUS_NAME; + +/*-------------------------------------------------------------------------*/ + +/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ + +/* Thanks to NetChip Technologies for donating this product ID. + * It's for devices with only CDC Ethernet configurations. + */ +#define CDC_VENDOR_NUM 0x0525 /* NetChip */ +#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */ + +/* For hardware that can't talk CDC, we use the same vendor ID that + * ARM Linux has used for ethernet-over-usb, both with sa1100 and + * with pxa250. We're protocol-compatible, if the host-side drivers + * use the endpoint descriptors. bcdDevice (version) is nonzero, so + * drivers that need to hard-wire endpoint numbers have a hook. + * + * The protocol is a minimal subset of CDC Ether, which works on any bulk + * hardware that's not deeply broken ... even on hardware that can't talk + * RNDIS (like SA-1100, with no interrupt endpoint, or anything that + * doesn't handle control-OUT). + */ +#define SIMPLE_VENDOR_NUM 0x049f +#define SIMPLE_PRODUCT_NUM 0x505a + +/* For hardware that can talk RNDIS and either of the above protocols, + * use this ID ... the windows INF files will know it. Unless it's + * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose + * the non-RNDIS configuration. + */ +#define RNDIS_VENDOR_NUM 0x0525 /* NetChip */ +#define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */ + + +/* Some systems will want different product identifers published in the + * device descriptor, either numbers or strings or both. These string + * parameters are in UTF-8 (superset of ASCII's 7 bit characters). + */ + +static ushort __initdata idVendor; +module_param(idVendor, ushort, S_IRUGO); +MODULE_PARM_DESC(idVendor, "USB Vendor ID"); + +static ushort __initdata idProduct; +module_param(idProduct, ushort, S_IRUGO); +MODULE_PARM_DESC(idProduct, "USB Product ID"); + +static ushort __initdata bcdDevice; +module_param(bcdDevice, ushort, S_IRUGO); +MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); + +static char *__initdata iManufacturer; +module_param(iManufacturer, charp, S_IRUGO); +MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); + +static char *__initdata iProduct; +module_param(iProduct, charp, S_IRUGO); +MODULE_PARM_DESC(iProduct, "USB Product string"); + +/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */ +static char *__initdata dev_addr; +module_param(dev_addr, charp, S_IRUGO); +MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); + +/* this address is invisible to ifconfig */ +static char *__initdata host_addr; +module_param(host_addr, charp, S_IRUGO); +MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); + + +/*-------------------------------------------------------------------------*/ + +/* Include CDC support if we could run on CDC-capable hardware. */ + +#ifdef CONFIG_USB_GADGET_NET2280 +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_DUMMY_HCD +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_GOKU +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_LH7A40X +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_MQ11XX +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_OMAP +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_N9604 +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_PXA27X +#define DEV_CONFIG_CDC +#endif + +#ifdef CONFIG_USB_GADGET_AT91 +#define DEV_CONFIG_CDC +#endif + + +/* For CDC-incapable hardware, choose the simple cdc subset. + * Anything that talks bulk (without notable bugs) can do this. + */ +#ifdef CONFIG_USB_GADGET_PXA2XX +#define DEV_CONFIG_SUBSET +#endif + +#ifdef CONFIG_USB_GADGET_SH +#define DEV_CONFIG_SUBSET +#endif + +#ifdef CONFIG_USB_GADGET_SA1100 +/* use non-CDC for backwards compatibility */ +#define DEV_CONFIG_SUBSET +#endif + +#ifdef CONFIG_USB_GADGET_S3C2410 +#define DEV_CONFIG_CDC +#endif + +/*-------------------------------------------------------------------------*/ + +/* "main" config is either CDC, or its simple subset */ +static inline int is_cdc(struct eth_dev *dev) +{ +#if !defined(DEV_CONFIG_SUBSET) + return 1; /* only cdc possible */ +#elif !defined (DEV_CONFIG_CDC) + return 0; /* only subset possible */ +#else + return dev->cdc; /* depends on what hardware we found */ +#endif +} + +/* "secondary" RNDIS config may sometimes be activated */ +static inline int rndis_active(struct eth_dev *dev) +{ +#ifdef CONFIG_USB_ETH_RNDIS + return dev->rndis; +#else + return 0; +#endif +} + +#define subset_active(dev) (!is_cdc(dev) && !rndis_active(dev)) +#define cdc_active(dev) ( is_cdc(dev) && !rndis_active(dev)) + + + +#define DEFAULT_QLEN 2 /* double buffering by default */ + +/* peak bulk transfer bits-per-second */ +#define HS_BPS (13 * 512 * 8 * 1000 * 8) +#define FS_BPS (19 * 64 * 1 * 1000 * 8) + +#ifdef CONFIG_USB_GADGET_DUALSPEED + +static unsigned qmult = 5; +module_param (qmult, uint, S_IRUGO|S_IWUSR); + + +/* for dual-speed hardware, use deeper queues at highspeed */ +#define qlen(gadget) \ + (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1)) + +/* also defer IRQs on highspeed TX */ +#define TX_DELAY qmult + +#define BITRATE(g) (((g)->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS) + +#else /* full speed (low speed doesn't do bulk) */ +#define qlen(gadget) DEFAULT_QLEN + +#define BITRATE(g) FS_BPS +#endif + + +/*-------------------------------------------------------------------------*/ + +#define xprintk(d,level,fmt,args...) \ + printk(level "%s: " fmt , (d)->net->name , ## args) + +#ifdef DEBUG +#undef DEBUG +#define DEBUG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DEBUG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDEBUG DEBUG +#else +#define VDEBUG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARN(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + +/*-------------------------------------------------------------------------*/ + +/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly + * ep0 implementation: descriptors, config management, setup(). + * also optional class-specific notification interrupt transfer. + */ + +/* + * DESCRIPTORS ... most are static, but strings and (full) configuration + * descriptors are built on demand. For now we do either full CDC, or + * our simple subset, with RNDIS as an optional second configuration. + * + * RNDIS includes some CDC ACM descriptors ... like CDC Ethernet. But + * the class descriptors match a modem (they're ignored; it's really just + * Ethernet functionality), they don't need the NOP altsetting, and the + * status transfer endpoint isn't optional. + */ + +#define STRING_MANUFACTURER 1 +#define STRING_PRODUCT 2 +#define STRING_ETHADDR 3 +#define STRING_DATA 4 +#define STRING_CONTROL 5 +#define STRING_RNDIS_CONTROL 6 +#define STRING_CDC 7 +#define STRING_SUBSET 8 +#define STRING_RNDIS 9 + +#define USB_BUFSIZ 256 /* holds our biggest descriptor */ + +/* + * This device advertises one configuration, eth_config, unless RNDIS + * is enabled (rndis_config) on hardware supporting at least two configs. + * + * NOTE: Controllers like superh_udc should probably be able to use + * an RNDIS-only configuration. + * + * FIXME define some higher-powered configurations to make it easier + * to recharge batteries ... + */ + +#define DEV_CONFIG_VALUE 1 /* cdc or subset */ +#define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */ + +static struct usb_device_descriptor +device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + + .bcdUSB = __constant_cpu_to_le16 (0x0200), + + .bDeviceClass = USB_CLASS_COMM, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + + .idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM), + .iManufacturer = STRING_MANUFACTURER, + .iProduct = STRING_PRODUCT, + .bNumConfigurations = 1, +}; + +static struct usb_otg_descriptor +otg_descriptor = { + .bLength = sizeof otg_descriptor, + .bDescriptorType = USB_DT_OTG, + + .bmAttributes = USB_OTG_SRP, +}; + +static struct usb_config_descriptor +eth_config = { + .bLength = sizeof eth_config, + .bDescriptorType = USB_DT_CONFIG, + + /* compute wTotalLength on the fly */ + .bNumInterfaces = 2, + .bConfigurationValue = DEV_CONFIG_VALUE, + .iConfiguration = STRING_CDC, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 50, +}; + +#ifdef CONFIG_USB_ETH_RNDIS +static struct usb_config_descriptor +rndis_config = { + .bLength = sizeof rndis_config, + .bDescriptorType = USB_DT_CONFIG, + + /* compute wTotalLength on the fly */ + .bNumInterfaces = 2, + .bConfigurationValue = DEV_RNDIS_CONFIG_VALUE, + .iConfiguration = STRING_RNDIS, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 50, +}; +#endif + +/* + * Compared to the simple CDC subset, the full CDC Ethernet model adds + * three class descriptors, two interface descriptors, optional status + * endpoint. Both have a "data" interface and two bulk endpoints. + * There are also differences in how control requests are handled. + * + * RNDIS shares a lot with CDC-Ethernet, since it's a variant of + * the CDC-ACM (modem) spec. + */ + +#ifdef DEV_CONFIG_CDC +static struct usb_interface_descriptor +control_intf = { + .bLength = sizeof control_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bInterfaceNumber = 0, + /* status endpoint is optional; this may be patched later */ + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .iInterface = STRING_CONTROL, +}; +#endif + +#ifdef CONFIG_USB_ETH_RNDIS +static const struct usb_interface_descriptor +rndis_control_intf = { + .bLength = sizeof rndis_control_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bInterfaceNumber = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, + .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR, + .iInterface = STRING_RNDIS_CONTROL, +}; +#endif + +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) + +static const struct usb_cdc_header_desc header_desc = { + .bLength = sizeof header_desc, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_HEADER_TYPE, + + .bcdCDC = __constant_cpu_to_le16 (0x0110), +}; + +static const struct usb_cdc_union_desc union_desc = { + .bLength = sizeof union_desc, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_UNION_TYPE, + + .bMasterInterface0 = 0, /* index of control interface */ + .bSlaveInterface0 = 1, /* index of DATA interface */ +}; + +#endif /* CDC || RNDIS */ + +#ifdef CONFIG_USB_ETH_RNDIS + +static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = { + .bLength = sizeof call_mgmt_descriptor, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, + + .bmCapabilities = 0x00, + .bDataInterface = 0x01, +}; + +static struct usb_cdc_acm_descriptor acm_descriptor = { + .bLength = sizeof acm_descriptor, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_ACM_TYPE, + + .bmCapabilities = 0x00, +}; + +#endif + +#ifdef DEV_CONFIG_CDC + +static const struct usb_cdc_ether_desc ether_desc = { + .bLength = sizeof ether_desc, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, + + /* this descriptor actually adds value, surprise! */ + .iMACAddress = STRING_ETHADDR, + .bmEthernetStatistics = __constant_cpu_to_le32 (0), /* no statistics */ + .wMaxSegmentSize = __constant_cpu_to_le16 (ETH_FRAME_LEN), + .wNumberMCFilters = __constant_cpu_to_le16 (0), + .bNumberPowerFilters = 0, +}; + +#endif + +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) + +/* include the status endpoint if we can, even where it's optional. + * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one + * packet, to simplify cancelation; and a big transfer interval, to + * waste less bandwidth. + * + * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even + * if they ignore the connect/disconnect notifications that real aether + * can provide. more advanced cdc configurations might want to support + * encapsulated commands (vendor-specific, using control-OUT). + * + * RNDIS requires the status endpoint, since it uses that encapsulation + * mechanism for its funky RPC scheme. + */ + +#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ +#define STATUS_BYTECOUNT 16 /* 8 byte header + data */ + +static struct usb_endpoint_descriptor +fs_status_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT), + .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, +}; +#endif + +#ifdef DEV_CONFIG_CDC + +/* the default data interface has no endpoints ... */ + +static const struct usb_interface_descriptor +data_nop_intf = { + .bLength = sizeof data_nop_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bInterfaceNumber = 1, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, +}; + +/* ... but the "real" data interface has two bulk endpoints */ + +static const struct usb_interface_descriptor +data_intf = { + .bLength = sizeof data_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bInterfaceNumber = 1, + .bAlternateSetting = 1, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = STRING_DATA, +}; + +#endif + +#ifdef CONFIG_USB_ETH_RNDIS + +/* RNDIS doesn't activate by changing to the "real" altsetting */ + +static const struct usb_interface_descriptor +rndis_data_intf = { + .bLength = sizeof rndis_data_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bInterfaceNumber = 1, + .bAlternateSetting = 0, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = STRING_DATA, +}; + +#endif + +#ifdef DEV_CONFIG_SUBSET + +/* + * "Simple" CDC-subset option is a simple vendor-neutral model that most + * full speed controllers can handle: one interface, two bulk endpoints. + */ + +static const struct usb_interface_descriptor +subset_data_intf = { + .bLength = sizeof subset_data_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = STRING_DATA, +}; + +#endif /* SUBSET */ + + +static struct usb_endpoint_descriptor +fs_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor +fs_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static const struct usb_descriptor_header *fs_eth_function [11] = { + (struct usb_descriptor_header *) &otg_descriptor, +#ifdef DEV_CONFIG_CDC + /* "cdc" mode descriptors */ + (struct usb_descriptor_header *) &control_intf, + (struct usb_descriptor_header *) &header_desc, + (struct usb_descriptor_header *) &union_desc, + (struct usb_descriptor_header *) ðer_desc, + /* NOTE: status endpoint may need to be removed */ + (struct usb_descriptor_header *) &fs_status_desc, + /* data interface, with altsetting */ + (struct usb_descriptor_header *) &data_nop_intf, + (struct usb_descriptor_header *) &data_intf, + (struct usb_descriptor_header *) &fs_source_desc, + (struct usb_descriptor_header *) &fs_sink_desc, + NULL, +#endif /* DEV_CONFIG_CDC */ +}; + +static inline void __init fs_subset_descriptors(void) +{ +#ifdef DEV_CONFIG_SUBSET + fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf; + fs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc; + fs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc; + fs_eth_function[4] = NULL; +#else + fs_eth_function[1] = NULL; +#endif +} + +#ifdef CONFIG_USB_ETH_RNDIS +static const struct usb_descriptor_header *fs_rndis_function [] = { + (struct usb_descriptor_header *) &otg_descriptor, + /* control interface matches ACM, not Ethernet */ + (struct usb_descriptor_header *) &rndis_control_intf, + (struct usb_descriptor_header *) &header_desc, + (struct usb_descriptor_header *) &call_mgmt_descriptor, + (struct usb_descriptor_header *) &acm_descriptor, + (struct usb_descriptor_header *) &union_desc, + (struct usb_descriptor_header *) &fs_status_desc, + /* data interface has no altsetting */ + (struct usb_descriptor_header *) &rndis_data_intf, + (struct usb_descriptor_header *) &fs_source_desc, + (struct usb_descriptor_header *) &fs_sink_desc, + NULL, +}; +#endif + +#ifdef CONFIG_USB_GADGET_DUALSPEED + +/* + * usb 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + */ + +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) +static struct usb_endpoint_descriptor +hs_status_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT), + .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, +}; +#endif /* DEV_CONFIG_CDC */ + +static struct usb_endpoint_descriptor +hs_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16 (512), +}; + +static struct usb_endpoint_descriptor +hs_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16 (512), +}; + +static struct usb_qualifier_descriptor +dev_qualifier = { + .bLength = sizeof dev_qualifier, + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + + .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bDeviceClass = USB_CLASS_COMM, + + .bNumConfigurations = 1, +}; + +static const struct usb_descriptor_header *hs_eth_function [11] = { + (struct usb_descriptor_header *) &otg_descriptor, +#ifdef DEV_CONFIG_CDC + /* "cdc" mode descriptors */ + (struct usb_descriptor_header *) &control_intf, + (struct usb_descriptor_header *) &header_desc, + (struct usb_descriptor_header *) &union_desc, + (struct usb_descriptor_header *) ðer_desc, + /* NOTE: status endpoint may need to be removed */ + (struct usb_descriptor_header *) &hs_status_desc, + /* data interface, with altsetting */ + (struct usb_descriptor_header *) &data_nop_intf, + (struct usb_descriptor_header *) &data_intf, + (struct usb_descriptor_header *) &hs_source_desc, + (struct usb_descriptor_header *) &hs_sink_desc, + NULL, +#endif /* DEV_CONFIG_CDC */ +}; + +static inline void __init hs_subset_descriptors(void) +{ +#ifdef DEV_CONFIG_SUBSET + hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf; + hs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc; + hs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc; + hs_eth_function[4] = NULL; +#else + hs_eth_function[1] = NULL; +#endif +} + +#ifdef CONFIG_USB_ETH_RNDIS +static const struct usb_descriptor_header *hs_rndis_function [] = { + (struct usb_descriptor_header *) &otg_descriptor, + /* control interface matches ACM, not Ethernet */ + (struct usb_descriptor_header *) &rndis_control_intf, + (struct usb_descriptor_header *) &header_desc, + (struct usb_descriptor_header *) &call_mgmt_descriptor, + (struct usb_descriptor_header *) &acm_descriptor, + (struct usb_descriptor_header *) &union_desc, + (struct usb_descriptor_header *) &hs_status_desc, + /* data interface has no altsetting */ + (struct usb_descriptor_header *) &rndis_data_intf, + (struct usb_descriptor_header *) &hs_source_desc, + (struct usb_descriptor_header *) &hs_sink_desc, + NULL, +}; +#endif + + +/* maxpacket and other transfer characteristics vary by speed. */ +#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) + +#else + +/* if there's no high speed support, maxpacket doesn't change. */ +#define ep_desc(g,hs,fs) fs + +static inline void __init hs_subset_descriptors(void) +{ +} + +#endif /* !CONFIG_USB_GADGET_DUALSPEED */ + +/*-------------------------------------------------------------------------*/ + +/* descriptors that are built on-demand */ + +static char manufacturer [50]; +static char product_desc [40] = DRIVER_DESC; + +#ifdef DEV_CONFIG_CDC +/* address that the host will use ... usually assigned at random */ +static char ethaddr [2 * ETH_ALEN + 1]; +#endif + +/* static strings, in UTF-8 */ +static struct usb_string strings [] = { + { STRING_MANUFACTURER, manufacturer, }, + { STRING_PRODUCT, product_desc, }, + { STRING_DATA, "Ethernet Data", }, +#ifdef DEV_CONFIG_CDC + { STRING_CDC, "CDC Ethernet", }, + { STRING_ETHADDR, ethaddr, }, + { STRING_CONTROL, "CDC Communications Control", }, +#endif +#ifdef DEV_CONFIG_SUBSET + { STRING_SUBSET, "CDC Ethernet Subset", }, +#endif +#ifdef CONFIG_USB_ETH_RNDIS + { STRING_RNDIS, "RNDIS", }, + { STRING_RNDIS_CONTROL, "RNDIS Communications Control", }, +#endif + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab = { + .language = 0x0409, /* en-us */ + .strings = strings, +}; + +/* + * one config, two interfaces: control, data. + * complications: class descriptors, and an altsetting. + */ +static int +config_buf (enum usb_device_speed speed, + u8 *buf, u8 type, + unsigned index, int is_otg) +{ + int len; + const struct usb_config_descriptor *config; + const struct usb_descriptor_header **function; +#ifdef CONFIG_USB_GADGET_DUALSPEED + int hs = (speed == USB_SPEED_HIGH); + + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; +#define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function) +#else +#define which_fn(t) (fs_ ## t ## _function) +#endif + + if (index >= device_desc.bNumConfigurations) + return -EINVAL; + +#ifdef CONFIG_USB_ETH_RNDIS + /* list the RNDIS config first, to make Microsoft's drivers + * happy. DOCSIS 1.0 needs this too. + */ + if (device_desc.bNumConfigurations == 2 && index == 0) { + config = &rndis_config; + function = which_fn (rndis); + } else +#endif + { + config = ð_config; + function = which_fn (eth); + } + + /* for now, don't advertise srp-only devices */ + if (!is_otg) + function++; + + len = usb_gadget_config_buf (config, buf, USB_BUFSIZ, function); + if (len < 0) + return len; + ((struct usb_config_descriptor *) buf)->bDescriptorType = type; + return len; +} + +/*-------------------------------------------------------------------------*/ + +static void eth_start (struct eth_dev *dev, int gfp_flags); +static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags); + +#ifdef DEV_CONFIG_CDC +static inline int ether_alt_ep_setup (struct eth_dev *dev, struct usb_ep *ep) +{ + const struct usb_endpoint_descriptor *d; + + /* With CDC, the host isn't allowed to use these two data + * endpoints in the default altsetting for the interface. + * so we don't activate them yet. Reset from SET_INTERFACE. + * + * Strictly speaking RNDIS should work the same: activation is + * a side effect of setting a packet filter. Deactivation is + * from REMOTE_NDIS_HALT_MSG, reset from REMOTE_NDIS_RESET_MSG. + */ + + /* one endpoint writes data back IN to the host */ + if (strcmp (ep->name, EP_IN_NAME) == 0) { + d = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc); + ep->driver_data = dev; + dev->in = d; + + /* one endpoint just reads OUT packets */ + } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { + d = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc); + ep->driver_data = dev; + dev->out = d; + + /* optional status/notification endpoint */ + } else if (EP_STATUS_NAME && + strcmp (ep->name, EP_STATUS_NAME) == 0) { + int result; + + d = ep_desc (dev->gadget, &hs_status_desc, &fs_status_desc); + result = usb_ep_enable (ep, d); + if (result < 0) + return result; + + ep->driver_data = dev; + dev->status = d; + } + return 0; +} +#endif + +#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS) +static inline int ether_ep_setup (struct eth_dev *dev, struct usb_ep *ep) +{ + int result; + const struct usb_endpoint_descriptor *d; + + /* CDC subset is simpler: if the device is there, + * it's live with rx and tx endpoints. + * + * Do this as a shortcut for RNDIS too. + */ + + /* one endpoint writes data back IN to the host */ + if (strcmp (ep->name, EP_IN_NAME) == 0) { + d = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc); + result = usb_ep_enable (ep, d); + if (result < 0) + return result; + + ep->driver_data = dev; + dev->in = d; + + /* one endpoint just reads OUT packets */ + } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { + d = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc); + result = usb_ep_enable (ep, d); + if (result < 0) + return result; + + ep->driver_data = dev; + dev->out = d; + } + + return 0; +} +#endif + +static int +set_ether_config (struct eth_dev *dev, int gfp_flags) +{ + int result = 0; + struct usb_ep *ep; + struct usb_gadget *gadget = dev->gadget; + + gadget_for_each_ep (ep, gadget) { +#ifdef DEV_CONFIG_CDC + if (!dev->rndis && dev->cdc) { + result = ether_alt_ep_setup (dev, ep); + if (result == 0) + continue; + } +#endif + +#ifdef CONFIG_USB_ETH_RNDIS + if (dev->rndis && strcmp (ep->name, EP_STATUS_NAME) == 0) { + const struct usb_endpoint_descriptor *d; + d = ep_desc (gadget, &hs_status_desc, &fs_status_desc); + result = usb_ep_enable (ep, d); + if (result == 0) { + ep->driver_data = dev; + dev->status = d; + continue; + } + } else +#endif + + { +#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS) + result = ether_ep_setup (dev, ep); + if (result == 0) + continue; +#endif + } + + /* stop on error */ + ERROR (dev, "can't enable %s, result %d\n", ep->name, result); + break; + } + if (!result && (!dev->in_ep || !dev->out_ep)) + result = -ENODEV; + + if (result == 0) + result = alloc_requests (dev, qlen (gadget), gfp_flags); + + /* on error, disable any endpoints */ + if (result < 0) { +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) + if (dev->status) + (void) usb_ep_disable (dev->status_ep); +#endif + dev->status = NULL; +#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS) + if (dev->rndis || !dev->cdc) { + if (dev->in) + (void) usb_ep_disable (dev->in_ep); + if (dev->out) + (void) usb_ep_disable (dev->out_ep); + } +#endif + dev->in = NULL; + dev->out = NULL; + } else + + /* activate non-CDC configs right away + * this isn't strictly according to the RNDIS spec + */ +#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS) + if (dev->rndis || !dev->cdc) { + netif_carrier_on (dev->net); + if (netif_running (dev->net)) { + spin_unlock (&dev->lock); + eth_start (dev, GFP_ATOMIC); + spin_lock (&dev->lock); + } + } +#endif + + if (result == 0) + DEBUG (dev, "qlen %d\n", qlen (gadget)); + + /* caller is responsible for cleanup on error */ + return result; +} + +static void eth_reset_config (struct eth_dev *dev) +{ + struct usb_request *req; + + if (dev->config == 0) + return; + + DEBUG (dev, "%s\n", __FUNCTION__); + + netif_stop_queue (dev->net); + netif_carrier_off (dev->net); + + /* disable endpoints, forcing (synchronous) completion of + * pending i/o. then free the requests. + */ + if (dev->in) { + usb_ep_disable (dev->in_ep); + while (likely (!list_empty (&dev->tx_reqs))) { + req = container_of (dev->tx_reqs.next, + struct usb_request, list); + list_del (&req->list); + usb_ep_free_request (dev->in_ep, req); + } + } + if (dev->out) { + usb_ep_disable (dev->out_ep); + while (likely (!list_empty (&dev->rx_reqs))) { + req = container_of (dev->rx_reqs.next, + struct usb_request, list); + list_del (&req->list); + usb_ep_free_request (dev->out_ep, req); + } + } + + if (dev->status) { + usb_ep_disable (dev->status_ep); + } + dev->config = 0; +} + +/* change our operational config. must agree with the code + * that returns config descriptors, and altsetting code. + */ +static int +eth_set_config (struct eth_dev *dev, unsigned number, int gfp_flags) +{ + int result = 0; + struct usb_gadget *gadget = dev->gadget; + + if (number == dev->config) + return 0; + + if (gadget_is_sa1100 (gadget) + && dev->config + && atomic_read (&dev->tx_qlen) != 0) { + /* tx fifo is full, but we can't clear it...*/ + INFO (dev, "can't change configurations\n"); + return -ESPIPE; + } + eth_reset_config (dev); + + /* default: pass all packets, no multicast filtering */ + dev->cdc_filter = 0x000f; + + switch (number) { + case DEV_CONFIG_VALUE: + dev->rndis = 0; + result = set_ether_config (dev, gfp_flags); + break; +#ifdef CONFIG_USB_ETH_RNDIS + case DEV_RNDIS_CONFIG_VALUE: + dev->rndis = 1; + result = set_ether_config (dev, gfp_flags); + break; +#endif + default: + result = -EINVAL; + /* FALL THROUGH */ + case 0: + break; + } + + if (result) { + if (number) + eth_reset_config (dev); + usb_gadget_vbus_draw(dev->gadget, + dev->gadget->is_otg ? 8 : 100); + } else { + char *speed; + unsigned power; + + power = 2 * eth_config.bMaxPower; + usb_gadget_vbus_draw(dev->gadget, power); + + switch (gadget->speed) { + case USB_SPEED_FULL: speed = "full"; break; +#ifdef CONFIG_USB_GADGET_DUALSPEED + case USB_SPEED_HIGH: speed = "high"; break; +#endif + default: speed = "?"; break; + } + + dev->config = number; + INFO (dev, "%s speed config #%d: %d mA, %s, using %s\n", + speed, number, power, driver_desc, + dev->rndis + ? "RNDIS" + : (dev->cdc + ? "CDC Ethernet" + : "CDC Ethernet Subset")); + } + return result; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEV_CONFIG_CDC + +static void eth_status_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct usb_cdc_notification *event = req->buf; + int value = req->status; + struct eth_dev *dev = ep->driver_data; + + /* issue the second notification if host reads the first */ + if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION + && value == 0) { + __le32 *data = req->buf + sizeof *event; + + event->bmRequestType = 0xA1; + event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE; + event->wValue = __constant_cpu_to_le16 (0); + event->wIndex = __constant_cpu_to_le16 (1); + event->wLength = __constant_cpu_to_le16 (8); + + /* SPEED_CHANGE data is up/down speeds in bits/sec */ + data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget)); + + req->length = STATUS_BYTECOUNT; + value = usb_ep_queue (ep, req, GFP_ATOMIC); + DEBUG (dev, "send SPEED_CHANGE --> %d\n", value); + if (value == 0) + return; + } else if (value != -ECONNRESET) + DEBUG (dev, "event %02x --> %d\n", + event->bNotificationType, value); + event->bmRequestType = 0xff; +} + +static void issue_start_status (struct eth_dev *dev) +{ + struct usb_request *req = dev->stat_req; + struct usb_cdc_notification *event; + int value; + + DEBUG (dev, "%s, flush old status first\n", __FUNCTION__); + + /* flush old status + * + * FIXME ugly idiom, maybe we'd be better with just + * a "cancel the whole queue" primitive since any + * unlink-one primitive has way too many error modes. + * here, we "know" toggle is already clear... + */ + usb_ep_disable (dev->status_ep); + usb_ep_enable (dev->status_ep, dev->status); + + /* 3.8.1 says to issue first NETWORK_CONNECTION, then + * a SPEED_CHANGE. could be useful in some configs. + */ + event = req->buf; + event->bmRequestType = 0xA1; + event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION; + event->wValue = __constant_cpu_to_le16 (1); /* connected */ + event->wIndex = __constant_cpu_to_le16 (1); + event->wLength = 0; + + req->length = sizeof *event; + req->complete = eth_status_complete; + value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC); + if (value < 0) + DEBUG (dev, "status buf queue --> %d\n", value); +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) + DEBUG ((struct eth_dev *) ep->driver_data, + "setup complete --> %d, %d/%d\n", + req->status, req->actual, req->length); +} + +#ifdef CONFIG_USB_ETH_RNDIS + +static void rndis_response_complete (struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) + DEBUG ((struct eth_dev *) ep->driver_data, + "rndis response complete --> %d, %d/%d\n", + req->status, req->actual, req->length); + + /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */ +} + +static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct eth_dev *dev = ep->driver_data; + int status; + + /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */ + spin_lock(&dev->lock); + status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf); + if (status < 0) + ERROR(dev, "%s: rndis parse error %d\n", __FUNCTION__, status); + spin_unlock(&dev->lock); +} + +#endif /* RNDIS */ + +/* + * The setup() callback implements all the ep0 functionality that's not + * handled lower down. CDC has a number of less-common features: + * + * - two interfaces: control, and ethernet data + * - Ethernet data interface has two altsettings: default, and active + * - class-specific descriptors for the control interface + * - class-specific control requests + */ +static int +eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +{ + struct eth_dev *dev = get_gadget_data (gadget); + struct usb_request *req = dev->req; + int value = -EOPNOTSUPP; + u16 wIndex = ctrl->wIndex; + u16 wValue = ctrl->wValue; + u16 wLength = ctrl->wLength; + + /* descriptors just go into the pre-allocated ep0 buffer, + * while config change events may enable network traffic. + */ + req->complete = eth_setup_complete; + switch (ctrl->bRequest) { + + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != USB_DIR_IN) + break; + switch (wValue >> 8) { + + case USB_DT_DEVICE: + value = min (wLength, (u16) sizeof device_desc); + memcpy (req->buf, &device_desc, value); + break; +#ifdef CONFIG_USB_GADGET_DUALSPEED + case USB_DT_DEVICE_QUALIFIER: + if (!gadget->is_dualspeed) + break; + value = min (wLength, (u16) sizeof dev_qualifier); + memcpy (req->buf, &dev_qualifier, value); + break; + + case USB_DT_OTHER_SPEED_CONFIG: + if (!gadget->is_dualspeed) + break; + // FALLTHROUGH +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + case USB_DT_CONFIG: + value = config_buf (gadget->speed, req->buf, + wValue >> 8, + wValue & 0xff, + gadget->is_otg); + if (value >= 0) + value = min (wLength, (u16) value); + break; + + case USB_DT_STRING: + value = usb_gadget_get_string (&stringtab, + wValue & 0xff, req->buf); + if (value >= 0) + value = min (wLength, (u16) value); + break; + } + break; + + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) + break; + if (gadget->a_hnp_support) + DEBUG (dev, "HNP available\n"); + else if (gadget->a_alt_hnp_support) + DEBUG (dev, "HNP needs a different root port\n"); + spin_lock (&dev->lock); + value = eth_set_config (dev, wValue, GFP_ATOMIC); + spin_unlock (&dev->lock); + break; + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != USB_DIR_IN) + break; + *(u8 *)req->buf = dev->config; + value = min (wLength, (u16) 1); + break; + + case USB_REQ_SET_INTERFACE: + if (ctrl->bRequestType != USB_RECIP_INTERFACE + || !dev->config + || wIndex > 1) + break; + if (!dev->cdc && wIndex != 0) + break; + spin_lock (&dev->lock); + + /* PXA hardware partially handles SET_INTERFACE; + * we need to kluge around that interference. + */ + if (gadget_is_pxa (gadget)) { + value = eth_set_config (dev, DEV_CONFIG_VALUE, + GFP_ATOMIC); + goto done_set_intf; + } + +#ifdef DEV_CONFIG_CDC + switch (wIndex) { + case 0: /* control/master intf */ + if (wValue != 0) + break; + if (dev->status) { + usb_ep_disable (dev->status_ep); + usb_ep_enable (dev->status_ep, dev->status); + } + value = 0; + break; + case 1: /* data intf */ + if (wValue > 1) + break; + usb_ep_disable (dev->in_ep); + usb_ep_disable (dev->out_ep); + + /* CDC requires the data transfers not be done from + * the default interface setting ... also, setting + * the non-default interface clears filters etc. + */ + if (wValue == 1) { + usb_ep_enable (dev->in_ep, dev->in); + usb_ep_enable (dev->out_ep, dev->out); + dev->cdc_filter = DEFAULT_FILTER; + netif_carrier_on (dev->net); + if (dev->status) + issue_start_status (dev); + if (netif_running (dev->net)) { + spin_unlock (&dev->lock); + eth_start (dev, GFP_ATOMIC); + spin_lock (&dev->lock); + } + } else { + netif_stop_queue (dev->net); + netif_carrier_off (dev->net); + } + value = 0; + break; + } +#else + /* FIXME this is wrong, as is the assumption that + * all non-PXA hardware talks real CDC ... + */ + dev_warn (&gadget->dev, "set_interface ignored!\n"); +#endif /* DEV_CONFIG_CDC */ + +done_set_intf: + spin_unlock (&dev->lock); + break; + case USB_REQ_GET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE) + || !dev->config + || wIndex > 1) + break; + if (!(dev->cdc || dev->rndis) && wIndex != 0) + break; + + /* for CDC, iff carrier is on, data interface is active. */ + if (dev->rndis || wIndex != 1) + *(u8 *)req->buf = 0; + else + *(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0; + value = min (wLength, (u16) 1); + break; + +#ifdef DEV_CONFIG_CDC + case USB_CDC_SET_ETHERNET_PACKET_FILTER: + /* see 6.2.30: no data, wIndex = interface, + * wValue = packet filter bitmap + */ + if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE) + || !dev->cdc + || dev->rndis + || wLength != 0 + || wIndex > 1) + break; + DEBUG (dev, "packet filter %02x\n", wValue); + dev->cdc_filter = wValue; + value = 0; + break; + + /* and potentially: + * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS: + * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER: + * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER: + * case USB_CDC_GET_ETHERNET_STATISTIC: + */ + +#endif /* DEV_CONFIG_CDC */ + +#ifdef CONFIG_USB_ETH_RNDIS + /* RNDIS uses the CDC command encapsulation mechanism to implement + * an RPC scheme, with much getting/setting of attributes by OID. + */ + case USB_CDC_SEND_ENCAPSULATED_COMMAND: + if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE) + || !dev->rndis + || wLength > USB_BUFSIZ + || wValue + || rndis_control_intf.bInterfaceNumber + != wIndex) + break; + /* read the request, then process it */ + value = wLength; + req->complete = rndis_command_complete; + /* later, rndis_control_ack () sends a notification */ + break; + + case USB_CDC_GET_ENCAPSULATED_RESPONSE: + if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE) + == ctrl->bRequestType + && dev->rndis + // && wLength >= 0x0400 + && !wValue + && rndis_control_intf.bInterfaceNumber + == wIndex) { + u8 *buf; + + /* return the result */ + buf = rndis_get_next_response (dev->rndis_config, + &value); + if (buf) { + memcpy (req->buf, buf, value); + req->complete = rndis_response_complete; + rndis_free_response(dev->rndis_config, buf); + } + /* else stalls ... spec says to avoid that */ + } + break; +#endif /* RNDIS */ + + default: + VDEBUG (dev, + "unknown control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + } + + /* respond with data transfer before status phase? */ + if (value >= 0) { + req->length = value; + req->zero = value < wLength + && (value % gadget->ep0->maxpacket) == 0; + value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DEBUG (dev, "ep_queue --> %d\n", value); + req->status = 0; + eth_setup_complete (gadget->ep0, req); + } + } + + /* host either stalls (value < 0) or reports success */ + return value; +} + +static void +eth_disconnect (struct usb_gadget *gadget) +{ + struct eth_dev *dev = get_gadget_data (gadget); + unsigned long flags; + + spin_lock_irqsave (&dev->lock, flags); + netif_stop_queue (dev->net); + netif_carrier_off (dev->net); + eth_reset_config (dev); + spin_unlock_irqrestore (&dev->lock, flags); + + /* FIXME RNDIS should enter RNDIS_UNINITIALIZED */ + + /* next we may get setup() calls to enumerate new connections; + * or an unbind() during shutdown (including removing module). + */ +} + +/*-------------------------------------------------------------------------*/ + +/* NETWORK DRIVER HOOKUP (to the layer above this driver) */ + +static int eth_change_mtu (struct net_device *net, int new_mtu) +{ + struct eth_dev *dev = netdev_priv(net); + + // FIXME if rndis, don't change while link's live + + if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN) + return -ERANGE; + /* no zero-length packet read wanted after mtu-sized packets */ + if (((new_mtu + sizeof (struct ethhdr)) % dev->in_ep->maxpacket) == 0) + return -EDOM; + net->mtu = new_mtu; + return 0; +} + +static struct net_device_stats *eth_get_stats (struct net_device *net) +{ + return &((struct eth_dev *)netdev_priv(net))->stats; +} + +static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) +{ + struct eth_dev *dev = netdev_priv(net); + strlcpy(p->driver, shortname, sizeof p->driver); + strlcpy(p->version, DRIVER_VERSION, sizeof p->version); + strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version); + strlcpy (p->bus_info, dev->gadget->dev.bus_id, sizeof p->bus_info); +} + +static u32 eth_get_link(struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + return dev->gadget->speed != USB_SPEED_UNKNOWN; +} + +static struct ethtool_ops ops = { + .get_drvinfo = eth_get_drvinfo, + .get_link = eth_get_link +}; + +static void defer_kevent (struct eth_dev *dev, int flag) +{ + if (test_and_set_bit (flag, &dev->todo)) + return; + if (!schedule_work (&dev->work)) + ERROR (dev, "kevent %d may have been dropped\n", flag); + else + DEBUG (dev, "kevent %d scheduled\n", flag); +} + +static void rx_complete (struct usb_ep *ep, struct usb_request *req); + +static int +rx_submit (struct eth_dev *dev, struct usb_request *req, int gfp_flags) +{ + struct sk_buff *skb; + int retval = -ENOMEM; + size_t size; + + /* Padding up to RX_EXTRA handles minor disagreements with host. + * Normally we use the USB "terminate on short read" convention; + * so allow up to (N*maxpacket), since that memory is normally + * already allocated. Some hardware doesn't deal well with short + * reads (e.g. DMA must be N*maxpacket), so for now don't trim a + * byte off the end (to force hardware errors on overflow). + * + * RNDIS uses internal framing, and explicitly allows senders to + * pad to end-of-packet. That's potentially nice for speed, + * but means receivers can't recover synch on their own. + */ + size = (sizeof (struct ethhdr) + dev->net->mtu + RX_EXTRA); + size += dev->out_ep->maxpacket - 1; +#ifdef CONFIG_USB_ETH_RNDIS + if (dev->rndis) + size += sizeof (struct rndis_packet_msg_type); +#endif + size -= size % dev->out_ep->maxpacket; + + if ((skb = alloc_skb (size + NET_IP_ALIGN, gfp_flags)) == 0) { + DEBUG (dev, "no rx skb\n"); + goto enomem; + } + + /* Some platforms perform better when IP packets are aligned, + * but on at least one, checksumming fails otherwise. Note: + * this doesn't account for variable-sized RNDIS headers. + */ + skb_reserve(skb, NET_IP_ALIGN); + + req->buf = skb->data; + req->length = size; + req->complete = rx_complete; + req->context = skb; + + retval = usb_ep_queue (dev->out_ep, req, gfp_flags); + if (retval == -ENOMEM) +enomem: + defer_kevent (dev, WORK_RX_MEMORY); + if (retval) { + DEBUG (dev, "rx submit --> %d\n", retval); + dev_kfree_skb_any (skb); + spin_lock (&dev->lock); + list_add (&req->list, &dev->rx_reqs); + spin_unlock (&dev->lock); + } + return retval; +} + +static void rx_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct sk_buff *skb = req->context; + struct eth_dev *dev = ep->driver_data; + int status = req->status; + + switch (status) { + + /* normal completion */ + case 0: + skb_put (skb, req->actual); +#ifdef CONFIG_USB_ETH_RNDIS + /* we know MaxPacketsPerTransfer == 1 here */ + if (dev->rndis) + rndis_rm_hdr (req->buf, &(skb->len)); +#endif + if (ETH_HLEN > skb->len || skb->len > ETH_FRAME_LEN) { + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; + DEBUG (dev, "rx length %d\n", skb->len); + break; + } + + skb->dev = dev->net; + skb->protocol = eth_type_trans (skb, dev->net); + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + + /* no buffer copies needed, unless hardware can't + * use skb buffers. + */ + status = netif_rx (skb); + skb = NULL; + break; + + /* software-driven interface shutdown */ + case -ECONNRESET: // unlink + case -ESHUTDOWN: // disconnect etc + VDEBUG (dev, "rx shutdown, code %d\n", status); + goto quiesce; + + /* for hardware automagic (such as pxa) */ + case -ECONNABORTED: // endpoint reset + DEBUG (dev, "rx %s reset\n", ep->name); + defer_kevent (dev, WORK_RX_MEMORY); +quiesce: + dev_kfree_skb_any (skb); + goto clean; + + /* data overrun */ + case -EOVERFLOW: + dev->stats.rx_over_errors++; + // FALLTHROUGH + + default: + dev->stats.rx_errors++; + DEBUG (dev, "rx status %d\n", status); + break; + } + + if (skb) + dev_kfree_skb_any (skb); + if (!netif_running (dev->net)) { +clean: + /* nobody reading rx_reqs, so no dev->lock */ + list_add (&req->list, &dev->rx_reqs); + req = NULL; + } + if (req) + rx_submit (dev, req, GFP_ATOMIC); +} + +static int prealloc (struct list_head *list, struct usb_ep *ep, + unsigned n, int gfp_flags) +{ + unsigned i; + struct usb_request *req; + + if (!n) + return -ENOMEM; + + /* queue/recycle up to N requests */ + i = n; + list_for_each_entry (req, list, list) { + if (i-- == 0) + goto extra; + } + while (i--) { + req = usb_ep_alloc_request (ep, gfp_flags); + if (!req) + return list_empty (list) ? -ENOMEM : 0; + list_add (&req->list, list); + } + return 0; + +extra: + /* free extras */ + for (;;) { + struct list_head *next; + + next = req->list.next; + list_del (&req->list); + usb_ep_free_request (ep, req); + + if (next == list) + break; + + req = container_of (next, struct usb_request, list); + } + return 0; +} + +static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags) +{ + int status; + + status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags); + if (status < 0) + goto fail; + status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags); + if (status < 0) + goto fail; + return 0; +fail: + DEBUG (dev, "can't alloc requests\n"); + return status; +} + +static void rx_fill (struct eth_dev *dev, int gfp_flags) +{ + struct usb_request *req; + unsigned long flags; + + clear_bit (WORK_RX_MEMORY, &dev->todo); + + /* fill unused rxq slots with some skb */ + spin_lock_irqsave (&dev->lock, flags); + while (!list_empty (&dev->rx_reqs)) { + req = container_of (dev->rx_reqs.next, + struct usb_request, list); + list_del_init (&req->list); + spin_unlock_irqrestore (&dev->lock, flags); + + if (rx_submit (dev, req, gfp_flags) < 0) { + defer_kevent (dev, WORK_RX_MEMORY); + return; + } + + spin_lock_irqsave (&dev->lock, flags); + } + spin_unlock_irqrestore (&dev->lock, flags); +} + +static void eth_work (void *_dev) +{ + struct eth_dev *dev = _dev; + + if (test_bit (WORK_RX_MEMORY, &dev->todo)) { + if (netif_running (dev->net)) + rx_fill (dev, GFP_KERNEL); + else + clear_bit (WORK_RX_MEMORY, &dev->todo); + } + + if (dev->todo) + DEBUG (dev, "work done, flags = 0x%lx\n", dev->todo); +} + +static void tx_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct sk_buff *skb = req->context; + struct eth_dev *dev = ep->driver_data; + + switch (req->status) { + default: + dev->stats.tx_errors++; + VDEBUG (dev, "tx err %d\n", req->status); + /* FALLTHROUGH */ + case -ECONNRESET: // unlink + case -ESHUTDOWN: // disconnect etc + break; + case 0: + dev->stats.tx_bytes += skb->len; + } + dev->stats.tx_packets++; + + spin_lock (&dev->lock); + list_add (&req->list, &dev->tx_reqs); + spin_unlock (&dev->lock); + dev_kfree_skb_any (skb); + + atomic_dec (&dev->tx_qlen); + if (netif_carrier_ok (dev->net)) + netif_wake_queue (dev->net); +} + +static inline int eth_is_promisc (struct eth_dev *dev) +{ + /* no filters for the CDC subset; always promisc */ + if (subset_active (dev)) + return 1; + return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS; +} + +static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + int length = skb->len; + int retval; + struct usb_request *req = NULL; + unsigned long flags; + + /* apply outgoing CDC or RNDIS filters */ + if (!eth_is_promisc (dev)) { + u8 *dest = skb->data; + + if (dest [0] & 0x01) { + u16 type; + + /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host + * SET_ETHERNET_MULTICAST_FILTERS requests + */ + if (memcmp (dest, net->broadcast, ETH_ALEN) == 0) + type = USB_CDC_PACKET_TYPE_BROADCAST; + else + type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; + if (!(dev->cdc_filter & type)) { + dev_kfree_skb_any (skb); + return 0; + } + } + /* ignores USB_CDC_PACKET_TYPE_DIRECTED */ + } + + spin_lock_irqsave (&dev->lock, flags); + req = container_of (dev->tx_reqs.next, struct usb_request, list); + list_del (&req->list); + if (list_empty (&dev->tx_reqs)) + netif_stop_queue (net); + spin_unlock_irqrestore (&dev->lock, flags); + + /* no buffer copies needed, unless the network stack did it + * or the hardware can't use skb buffers. + * or there's not enough space for any RNDIS headers we need + */ +#ifdef CONFIG_USB_ETH_RNDIS + if (dev->rndis) { + struct sk_buff *skb_rndis; + + skb_rndis = skb_realloc_headroom (skb, + sizeof (struct rndis_packet_msg_type)); + if (!skb_rndis) + goto drop; + + dev_kfree_skb_any (skb); + skb = skb_rndis; + rndis_add_hdr (skb); + length = skb->len; + } +#endif + req->buf = skb->data; + req->context = skb; + req->complete = tx_complete; + + /* use zlp framing on tx for strict CDC-Ether conformance, + * though any robust network rx path ignores extra padding. + * and some hardware doesn't like to write zlps. + */ + req->zero = 1; + if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0) + length++; + + req->length = length; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + /* throttle highspeed IRQ rate back slightly */ + req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH) + ? ((atomic_read (&dev->tx_qlen) % TX_DELAY) != 0) + : 0; +#endif + + retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); + switch (retval) { + default: + DEBUG (dev, "tx queue err %d\n", retval); + break; + case 0: + net->trans_start = jiffies; + atomic_inc (&dev->tx_qlen); + } + + if (retval) { +#ifdef CONFIG_USB_ETH_RNDIS +drop: +#endif + dev->stats.tx_dropped++; + dev_kfree_skb_any (skb); + spin_lock_irqsave (&dev->lock, flags); + if (list_empty (&dev->tx_reqs)) + netif_start_queue (net); + list_add (&req->list, &dev->tx_reqs); + spin_unlock_irqrestore (&dev->lock, flags); + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_ETH_RNDIS + +static void rndis_send_media_state (struct eth_dev *dev, int connect) +{ + if (!dev) + return; + + if (connect) { + if (rndis_signal_connect (dev->rndis_config)) + return; + } else { + if (rndis_signal_disconnect (dev->rndis_config)) + return; + } +} + +static void +rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) + DEBUG ((struct eth_dev *) ep->driver_data, + "rndis control ack complete --> %d, %d/%d\n", + req->status, req->actual, req->length); + + usb_ep_free_buffer(ep, req->buf, req->dma, 8); + usb_ep_free_request(ep, req); +} + +static int rndis_control_ack (struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + u32 length; + struct usb_request *resp; + + /* in case RNDIS calls this after disconnect */ + if (!dev->status_ep) { + DEBUG (dev, "status ENODEV\n"); + return -ENODEV; + } + + /* Allocate memory for notification ie. ACK */ + resp = usb_ep_alloc_request (dev->status_ep, GFP_ATOMIC); + if (!resp) { + DEBUG (dev, "status ENOMEM\n"); + return -ENOMEM; + } + + resp->buf = usb_ep_alloc_buffer (dev->status_ep, 8, + &resp->dma, GFP_ATOMIC); + if (!resp->buf) { + DEBUG (dev, "status buf ENOMEM\n"); + usb_ep_free_request (dev->status_ep, resp); + return -ENOMEM; + } + + /* Send RNDIS RESPONSE_AVAILABLE notification; + * USB_CDC_NOTIFY_RESPONSE_AVAILABLE should work too + */ + resp->length = 8; + resp->complete = rndis_control_ack_complete; + + *((__le32 *) resp->buf) = __constant_cpu_to_le32 (1); + *((__le32 *) resp->buf + 1) = __constant_cpu_to_le32 (0); + + length = usb_ep_queue (dev->status_ep, resp, GFP_ATOMIC); + if (length < 0) { + resp->status = 0; + rndis_control_ack_complete (dev->status_ep, resp); + } + + return 0; +} + +#endif /* RNDIS */ + +static void eth_start (struct eth_dev *dev, int gfp_flags) +{ + DEBUG (dev, "%s\n", __FUNCTION__); + + /* fill the rx queue */ + rx_fill (dev, gfp_flags); + + /* and open the tx floodgates */ + atomic_set (&dev->tx_qlen, 0); + netif_wake_queue (dev->net); +#ifdef CONFIG_USB_ETH_RNDIS + if (dev->rndis) { + rndis_set_param_medium (dev->rndis_config, + NDIS_MEDIUM_802_3, + BITRATE(dev->gadget)); + rndis_send_media_state (dev, 1); + } +#endif +} + +static int eth_open (struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + + DEBUG (dev, "%s\n", __FUNCTION__); + if (netif_carrier_ok (dev->net)) + eth_start (dev, GFP_KERNEL); + return 0; +} + +static int eth_stop (struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + + VDEBUG (dev, "%s\n", __FUNCTION__); + netif_stop_queue (net); + + DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", + dev->stats.rx_packets, dev->stats.tx_packets, + dev->stats.rx_errors, dev->stats.tx_errors + ); + + /* ensure there are no more active requests */ + if (dev->config) { + usb_ep_disable (dev->in_ep); + usb_ep_disable (dev->out_ep); + if (netif_carrier_ok (dev->net)) { + DEBUG (dev, "host still using in/out endpoints\n"); + // FIXME idiom may leave toggle wrong here + usb_ep_enable (dev->in_ep, dev->in); + usb_ep_enable (dev->out_ep, dev->out); + } + if (dev->status_ep) { + usb_ep_disable (dev->status_ep); + usb_ep_enable (dev->status_ep, dev->status); + } + } + +#ifdef CONFIG_USB_ETH_RNDIS + if (dev->rndis) { + rndis_set_param_medium (dev->rndis_config, + NDIS_MEDIUM_802_3, 0); + rndis_send_media_state (dev, 0); + } +#endif + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request *eth_req_alloc (struct usb_ep *ep, unsigned size) +{ + struct usb_request *req; + + req = usb_ep_alloc_request (ep, GFP_KERNEL); + if (!req) + return NULL; + + req->buf = kmalloc (size, GFP_KERNEL); + if (!req->buf) { + usb_ep_free_request (ep, req); + req = NULL; + } + return req; +} + +static void +eth_req_free (struct usb_ep *ep, struct usb_request *req) +{ + kfree (req->buf); + usb_ep_free_request (ep, req); +} + + +static void +eth_unbind (struct usb_gadget *gadget) +{ + struct eth_dev *dev = get_gadget_data (gadget); + + DEBUG (dev, "unbind\n"); +#ifdef CONFIG_USB_ETH_RNDIS + rndis_deregister (dev->rndis_config); + rndis_exit (); +#endif + + /* we've already been disconnected ... no i/o is active */ + if (dev->req) { + eth_req_free (gadget->ep0, dev->req); + dev->req = NULL; + } + if (dev->stat_req) { + eth_req_free (dev->status_ep, dev->stat_req); + dev->stat_req = NULL; + } + + unregister_netdev (dev->net); + free_netdev(dev->net); + + /* assuming we used keventd, it must quiesce too */ + flush_scheduled_work (); + set_gadget_data (gadget, NULL); +} + +static u8 __init nibble (unsigned char c) +{ + if (likely (isdigit (c))) + return c - '0'; + c = toupper (c); + if (likely (isxdigit (c))) + return 10 + c - 'A'; + return 0; +} + +static void __init get_ether_addr (const char *str, u8 *dev_addr) +{ + if (str) { + unsigned i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if((*str == '.') || (*str == ':')) + str++; + num = nibble(*str++) << 4; + num |= (nibble(*str++)); + dev_addr [i] = num; + } + if (is_valid_ether_addr (dev_addr)) + return; + } + random_ether_addr(dev_addr); +} + +static int __init +eth_bind (struct usb_gadget *gadget) +{ + struct eth_dev *dev; + struct net_device *net; + u8 cdc = 1, zlp = 1, rndis = 1; + struct usb_ep *in_ep, *out_ep, *status_ep = NULL; + int status = -ENOMEM; + + /* these flags are only ever cleared; compiler take note */ +#ifndef DEV_CONFIG_CDC + cdc = 0; +#endif +#ifndef CONFIG_USB_ETH_RNDIS + rndis = 0; +#endif + + /* Because most host side USB stacks handle CDC Ethernet, that + * standard protocol is _strongly_ preferred for interop purposes. + * (By everyone except Microsoft.) + */ + if (gadget_is_net2280 (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); + } else if (gadget_is_dummy (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0202); + } else if (gadget_is_pxa (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203); + /* pxa doesn't support altsettings */ + cdc = 0; + } else if (gadget_is_sh(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204); + /* sh doesn't support multiple interfaces or configs */ + cdc = 0; + rndis = 0; + } else if (gadget_is_sa1100 (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205); + /* hardware can't write zlps */ + zlp = 0; + /* sa1100 CAN do CDC, without status endpoint ... we use + * non-CDC to be compatible with ARM Linux-2.4 "usb-eth". + */ + cdc = 0; + } else if (gadget_is_goku (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206); + } else if (gadget_is_mq11xx (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207); + } else if (gadget_is_omap (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208); + } else if (gadget_is_lh7a40x(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209); + } else if (gadget_is_n9604(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210); + } else if (gadget_is_pxa27x(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211); + } else if (gadget_is_s3c2410(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212); + } else if (gadget_is_at91(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213); + } else { + /* can't assume CDC works. don't want to default to + * anything less functional on CDC-capable hardware, + * so we fail in this case. + */ + dev_err (&gadget->dev, + "controller '%s' not recognized\n", + gadget->name); + return -ENODEV; + } + snprintf (manufacturer, sizeof manufacturer, "%s %s/%s", + system_utsname.sysname, system_utsname.release, + gadget->name); + + /* If there's an RNDIS configuration, that's what Windows wants to + * be using ... so use these product IDs here and in the "linux.inf" + * needed to install MSFT drivers. Current Linux kernels will use + * the second configuration if it's CDC Ethernet, and need some help + * to choose the right configuration otherwise. + */ + if (rndis) { + device_desc.idVendor = + __constant_cpu_to_le16(RNDIS_VENDOR_NUM); + device_desc.idProduct = + __constant_cpu_to_le16(RNDIS_PRODUCT_NUM); + snprintf (product_desc, sizeof product_desc, + "RNDIS/%s", driver_desc); + + /* CDC subset ... recognized by Linux since 2.4.10, but Windows + * drivers aren't widely available. + */ + } else if (!cdc) { + device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC; + device_desc.idVendor = + __constant_cpu_to_le16(SIMPLE_VENDOR_NUM); + device_desc.idProduct = + __constant_cpu_to_le16(SIMPLE_PRODUCT_NUM); + } + + /* support optional vendor/distro customization */ + if (idVendor) { + if (!idProduct) { + dev_err (&gadget->dev, "idVendor needs idProduct!\n"); + return -ENODEV; + } + device_desc.idVendor = cpu_to_le16(idVendor); + device_desc.idProduct = cpu_to_le16(idProduct); + if (bcdDevice) + device_desc.bcdDevice = cpu_to_le16(bcdDevice); + } + if (iManufacturer) + strlcpy (manufacturer, iManufacturer, sizeof manufacturer); + if (iProduct) + strlcpy (product_desc, iProduct, sizeof product_desc); + + /* all we really need is bulk IN/OUT */ + usb_ep_autoconfig_reset (gadget); + in_ep = usb_ep_autoconfig (gadget, &fs_source_desc); + if (!in_ep) { +autoconf_fail: + dev_err (&gadget->dev, + "can't autoconfigure on %s\n", + gadget->name); + return -ENODEV; + } + EP_IN_NAME = in_ep->name; + in_ep->driver_data = in_ep; /* claim */ + + out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc); + if (!out_ep) + goto autoconf_fail; + EP_OUT_NAME = out_ep->name; + out_ep->driver_data = out_ep; /* claim */ + +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) + /* CDC Ethernet control interface doesn't require a status endpoint. + * Since some hosts expect one, try to allocate one anyway. + */ + if (cdc || rndis) { + status_ep = usb_ep_autoconfig (gadget, &fs_status_desc); + if (status_ep) { + EP_STATUS_NAME = status_ep->name; + status_ep->driver_data = status_ep; /* claim */ + } else if (rndis) { + dev_err (&gadget->dev, + "can't run RNDIS on %s\n", + gadget->name); + return -ENODEV; +#ifdef DEV_CONFIG_CDC + /* pxa25x only does CDC subset; often used with RNDIS */ + } else if (cdc) { + control_intf.bNumEndpoints = 0; + /* FIXME remove endpoint from descriptor list */ +#endif + } + } +#endif + + /* one config: cdc, else minimal subset */ + if (!cdc) { + eth_config.bNumInterfaces = 1; + eth_config.iConfiguration = STRING_SUBSET; + fs_subset_descriptors(); + hs_subset_descriptors(); + } + + /* For now RNDIS is always a second config */ + if (rndis) + device_desc.bNumConfigurations = 2; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + if (rndis) + dev_qualifier.bNumConfigurations = 2; + else if (!cdc) + dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC; + + /* assumes ep0 uses the same value for both speeds ... */ + dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; + + /* and that all endpoints are dual-speed */ + hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; + hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) + if (EP_STATUS_NAME) + hs_status_desc.bEndpointAddress = + fs_status_desc.bEndpointAddress; +#endif +#endif /* DUALSPEED */ + + device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; + usb_gadget_set_selfpowered (gadget); + + if (gadget->is_otg) { + otg_descriptor.bmAttributes |= USB_OTG_HNP, + eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + eth_config.bMaxPower = 4; +#ifdef CONFIG_USB_ETH_RNDIS + rndis_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + rndis_config.bMaxPower = 4; +#endif + } + + net = alloc_etherdev (sizeof *dev); + if (!net) + return status; + dev = netdev_priv(net); + spin_lock_init (&dev->lock); + INIT_WORK (&dev->work, eth_work, dev); + INIT_LIST_HEAD (&dev->tx_reqs); + INIT_LIST_HEAD (&dev->rx_reqs); + + /* network device setup */ + dev->net = net; + SET_MODULE_OWNER (net); + strcpy (net->name, "usb%d"); + dev->cdc = cdc; + dev->zlp = zlp; + + dev->in_ep = in_ep; + dev->out_ep = out_ep; + dev->status_ep = status_ep; + + /* Module params for these addresses should come from ID proms. + * The host side address is used with CDC and RNDIS, and commonly + * ends up in a persistent config database. + */ + get_ether_addr(dev_addr, net->dev_addr); + if (cdc || rndis) { + get_ether_addr(host_addr, dev->host_mac); +#ifdef DEV_CONFIG_CDC + snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X", + dev->host_mac [0], dev->host_mac [1], + dev->host_mac [2], dev->host_mac [3], + dev->host_mac [4], dev->host_mac [5]); +#endif + } + + if (rndis) { + status = rndis_init(); + if (status < 0) { + dev_err (&gadget->dev, "can't init RNDIS, %d\n", + status); + goto fail; + } + } + + net->change_mtu = eth_change_mtu; + net->get_stats = eth_get_stats; + net->hard_start_xmit = eth_start_xmit; + net->open = eth_open; + net->stop = eth_stop; + // watchdog_timeo, tx_timeout ... + // set_multicast_list + SET_ETHTOOL_OPS(net, &ops); + + /* preallocate control message data and buffer */ + dev->req = eth_req_alloc (gadget->ep0, USB_BUFSIZ); + if (!dev->req) + goto fail; + dev->req->complete = eth_setup_complete; + + /* ... and maybe likewise for status transfer */ + if (dev->status_ep) { + dev->stat_req = eth_req_alloc (dev->status_ep, + STATUS_BYTECOUNT); + if (!dev->stat_req) { + eth_req_free (gadget->ep0, dev->req); + goto fail; + } + } + + /* finish hookup to lower layer ... */ + dev->gadget = gadget; + set_gadget_data (gadget, dev); + gadget->ep0->driver_data = dev; + + /* two kinds of host-initiated state changes: + * - iff DATA transfer is active, carrier is "on" + * - tx queueing enabled if open *and* carrier is "on" + */ + netif_stop_queue (dev->net); + netif_carrier_off (dev->net); + + // SET_NETDEV_DEV (dev->net, &gadget->dev); + status = register_netdev (dev->net); + if (status < 0) + goto fail1; + + INFO (dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); + INFO (dev, "using %s, OUT %s IN %s%s%s\n", gadget->name, + EP_OUT_NAME, EP_IN_NAME, + EP_STATUS_NAME ? " STATUS " : "", + EP_STATUS_NAME ? EP_STATUS_NAME : "" + ); + INFO (dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + net->dev_addr [0], net->dev_addr [1], + net->dev_addr [2], net->dev_addr [3], + net->dev_addr [4], net->dev_addr [5]); + + if (cdc || rndis) + INFO (dev, "HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + dev->host_mac [0], dev->host_mac [1], + dev->host_mac [2], dev->host_mac [3], + dev->host_mac [4], dev->host_mac [5]); + +#ifdef CONFIG_USB_ETH_RNDIS + if (rndis) { + u32 vendorID = 0; + + /* FIXME RNDIS vendor id == "vendor NIC code" == ? */ + + dev->rndis_config = rndis_register (rndis_control_ack); + if (dev->rndis_config < 0) { +fail0: + unregister_netdev (dev->net); + status = -ENODEV; + goto fail; + } + + /* these set up a lot of the OIDs that RNDIS needs */ + rndis_set_host_mac (dev->rndis_config, dev->host_mac); + if (rndis_set_param_dev (dev->rndis_config, dev->net, + &dev->stats)) + goto fail0; + if (rndis_set_param_vendor (dev->rndis_config, vendorID, + manufacturer)) + goto fail0; + if (rndis_set_param_medium (dev->rndis_config, + NDIS_MEDIUM_802_3, + 0)) + goto fail0; + INFO (dev, "RNDIS ready\n"); + } +#endif + + return status; + +fail1: + dev_dbg(&gadget->dev, "register_netdev failed, %d\n", status); +fail: + eth_unbind (gadget); + return status; +} + +/*-------------------------------------------------------------------------*/ + +static void +eth_suspend (struct usb_gadget *gadget) +{ + struct eth_dev *dev = get_gadget_data (gadget); + + DEBUG (dev, "suspend\n"); + dev->suspended = 1; +} + +static void +eth_resume (struct usb_gadget *gadget) +{ + struct eth_dev *dev = get_gadget_data (gadget); + + DEBUG (dev, "resume\n"); + dev->suspended = 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_gadget_driver eth_driver = { +#ifdef CONFIG_USB_GADGET_DUALSPEED + .speed = USB_SPEED_HIGH, +#else + .speed = USB_SPEED_FULL, +#endif + .function = (char *) driver_desc, + .bind = eth_bind, + .unbind = eth_unbind, + + .setup = eth_setup, + .disconnect = eth_disconnect, + + .suspend = eth_suspend, + .resume = eth_resume, + + .driver = { + .name = (char *) shortname, + // .shutdown = ... + // .suspend = ... + // .resume = ... + }, +}; + +MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_AUTHOR ("David Brownell, Benedikt Spanger"); +MODULE_LICENSE ("GPL"); + + +static int __init init (void) +{ + return usb_gadget_register_driver (ð_driver); +} +module_init (init); + +static void __exit cleanup (void) +{ + usb_gadget_unregister_driver (ð_driver); +} +module_exit (cleanup); + diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c new file mode 100644 index 0000000..4857f0e --- /dev/null +++ b/drivers/usb/gadget/file_storage.c @@ -0,0 +1,4139 @@ +/* + * file_storage.c -- File-backed USB Storage Gadget, for USB development + * + * Copyright (C) 2003-2005 Alan Stern + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/* + * The File-backed Storage Gadget acts as a USB Mass Storage device, + * appearing to the host as a disk drive. In addition to providing an + * example of a genuinely useful gadget driver for a USB device, it also + * illustrates a technique of double-buffering for increased throughput. + * Last but not least, it gives an easy way to probe the behavior of the + * Mass Storage drivers in a USB host. + * + * Backing storage is provided by a regular file or a block device, specified + * by the "file" module parameter. Access can be limited to read-only by + * setting the optional "ro" module parameter. The gadget will indicate that + * it has removable media if the optional "removable" module parameter is set. + * + * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), + * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected + * by the optional "transport" module parameter. It also supports the + * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), + * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by + * the optional "protocol" module parameter. In addition, the default + * Vendor ID, Product ID, and release number can be overridden. + * + * There is support for multiple logical units (LUNs), each of which has + * its own backing file. The number of LUNs can be set using the optional + * "luns" module parameter (anywhere from 1 to 8), and the corresponding + * files are specified using comma-separated lists for "file" and "ro". + * The default number of LUNs is taken from the number of "file" elements; + * it is 1 if "file" is not given. If "removable" is not set then a backing + * file must be specified for each LUN. If it is set, then an unspecified + * or empty backing filename means the LUN's medium is not loaded. + * + * Requirements are modest; only a bulk-in and a bulk-out endpoint are + * needed (an interrupt-out endpoint is also needed for CBI). The memory + * requirement amounts to two 16K buffers, size configurable by a parameter. + * Support is included for both full-speed and high-speed operation. + * + * Module options: + * + * file=filename[,filename...] + * Required if "removable" is not set, names of + * the files or block devices used for + * backing storage + * ro=b[,b...] Default false, booleans for read-only access + * removable Default false, boolean for removable media + * luns=N Default N = number of filenames, number of + * LUNs to support + * transport=XXX Default BBB, transport name (CB, CBI, or BBB) + * protocol=YYY Default SCSI, protocol name (RBC, 8020 or + * ATAPI, QIC, UFI, 8070, or SCSI; + * also 1 - 6) + * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID + * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID + * release=0xRRRR Override the USB release number (bcdDevice) + * buflen=N Default N=16384, buffer size used (will be + * rounded down to a multiple of + * PAGE_CACHE_SIZE) + * stall Default determined according to the type of + * USB device controller (usually true), + * boolean to permit the driver to halt + * bulk endpoints + * + * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro", + * "removable", and "luns" options are available; default values are used + * for everything else. + * + * The pathnames of the backing files and the ro settings are available in + * the attribute files "file" and "ro" in the lun<n> subdirectory of the + * gadget's sysfs directory. If the "removable" option is set, writing to + * these files will simulate ejecting/loading the medium (writing an empty + * line means eject) and adjusting a write-enable tab. Changes to the ro + * setting are not allowed when the medium is loaded. + * + * This gadget driver is heavily based on "Gadget Zero" by David Brownell. + */ + + +/* + * Driver Design + * + * The FSG driver is fairly straightforward. There is a main kernel + * thread that handles most of the work. Interrupt routines field + * callbacks from the controller driver: bulk- and interrupt-request + * completion notifications, endpoint-0 events, and disconnect events. + * Completion events are passed to the main thread by wakeup calls. Many + * ep0 requests are handled at interrupt time, but SetInterface, + * SetConfiguration, and device reset requests are forwarded to the + * thread in the form of "exceptions" using SIGUSR1 signals (since they + * should interrupt any ongoing file I/O operations). + * + * The thread's main routine implements the standard command/data/status + * parts of a SCSI interaction. It and its subroutines are full of tests + * for pending signals/exceptions -- all this polling is necessary since + * the kernel has no setjmp/longjmp equivalents. (Maybe this is an + * indication that the driver really wants to be running in userspace.) + * An important point is that so long as the thread is alive it keeps an + * open reference to the backing file. This will prevent unmounting + * the backing file's underlying filesystem and could cause problems + * during system shutdown, for example. To prevent such problems, the + * thread catches INT, TERM, and KILL signals and converts them into + * an EXIT exception. + * + * In normal operation the main thread is started during the gadget's + * fsg_bind() callback and stopped during fsg_unbind(). But it can also + * exit when it receives a signal, and there's no point leaving the + * gadget running when the thread is dead. So just before the thread + * exits, it deregisters the gadget driver. This makes things a little + * tricky: The driver is deregistered at two places, and the exiting + * thread can indirectly call fsg_unbind() which in turn can tell the + * thread to exit. The first problem is resolved through the use of the + * REGISTERED atomic bitflag; the driver will only be deregistered once. + * The second problem is resolved by having fsg_unbind() check + * fsg->state; it won't try to stop the thread if the state is already + * FSG_STATE_TERMINATED. + * + * To provide maximum throughput, the driver uses a circular pipeline of + * buffer heads (struct fsg_buffhd). In principle the pipeline can be + * arbitrarily long; in practice the benefits don't justify having more + * than 2 stages (i.e., double buffering). But it helps to think of the + * pipeline as being a long one. Each buffer head contains a bulk-in and + * a bulk-out request pointer (since the buffer can be used for both + * output and input -- directions always are given from the host's + * point of view) as well as a pointer to the buffer and various state + * variables. + * + * Use of the pipeline follows a simple protocol. There is a variable + * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. + * At any time that buffer head may still be in use from an earlier + * request, so each buffer head has a state variable indicating whether + * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the + * buffer head to be EMPTY, filling the buffer either by file I/O or by + * USB I/O (during which the buffer head is BUSY), and marking the buffer + * head FULL when the I/O is complete. Then the buffer will be emptied + * (again possibly by USB I/O, during which it is marked BUSY) and + * finally marked EMPTY again (possibly by a completion routine). + * + * A module parameter tells the driver to avoid stalling the bulk + * endpoints wherever the transport specification allows. This is + * necessary for some UDCs like the SuperH, which cannot reliably clear a + * halt on a bulk endpoint. However, under certain circumstances the + * Bulk-only specification requires a stall. In such cases the driver + * will halt the endpoint and set a flag indicating that it should clear + * the halt in software during the next device reset. Hopefully this + * will permit everything to work correctly. Furthermore, although the + * specification allows the bulk-out endpoint to halt when the host sends + * too much data, implementing this would cause an unavoidable race. + * The driver will always use the "no-stall" approach for OUT transfers. + * + * One subtle point concerns sending status-stage responses for ep0 + * requests. Some of these requests, such as device reset, can involve + * interrupting an ongoing file I/O operation, which might take an + * arbitrarily long time. During that delay the host might give up on + * the original ep0 request and issue a new one. When that happens the + * driver should not notify the host about completion of the original + * request, as the host will no longer be waiting for it. So the driver + * assigns to each ep0 request a unique tag, and it keeps track of the + * tag value of the request associated with a long-running exception + * (device-reset, interface-change, or configuration-change). When the + * exception handler is finished, the status-stage response is submitted + * only if the current ep0 request tag is equal to the exception request + * tag. Thus only the most recently received ep0 request will get a + * status-stage response. + * + * Warning: This driver source file is too long. It ought to be split up + * into a header file plus about 3 separate .c files, to handle the details + * of the Gadget, USB Mass Storage, and SCSI protocols. + */ + + +#undef DEBUG +#undef VERBOSE +#undef DUMP_MSGS + +#include <linux/config.h> + +#include <asm/system.h> +#include <asm/uaccess.h> + +#include <linux/bitops.h> +#include <linux/blkdev.h> +#include <linux/compiler.h> +#include <linux/completion.h> +#include <linux/dcache.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/fcntl.h> +#include <linux/file.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/limits.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pagemap.h> +#include <linux/rwsem.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/suspend.h> +#include <linux/utsname.h> +#include <linux/wait.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +#include "gadget_chips.h" + + +/*-------------------------------------------------------------------------*/ + +#define DRIVER_DESC "File-backed Storage Gadget" +#define DRIVER_NAME "g_file_storage" +#define DRIVER_VERSION "20 October 2004" + +static const char longname[] = DRIVER_DESC; +static const char shortname[] = DRIVER_NAME; + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Alan Stern"); +MODULE_LICENSE("Dual BSD/GPL"); + +/* Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with any other driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. */ +#define DRIVER_VENDOR_ID 0x0525 // NetChip +#define DRIVER_PRODUCT_ID 0xa4a5 // Linux-USB File-backed Storage Gadget + + +/* + * This driver assumes self-powered hardware and has no way for users to + * trigger remote wakeup. It uses autoconfiguration to select endpoints + * and endpoint addresses. + */ + + +/*-------------------------------------------------------------------------*/ + +#define xprintk(f,level,fmt,args...) \ + dev_printk(level , &(f)->gadget->dev , fmt , ## args) +#define yprintk(l,level,fmt,args...) \ + dev_printk(level , &(l)->dev , fmt , ## args) + +#ifdef DEBUG +#define DBG(fsg,fmt,args...) \ + xprintk(fsg , KERN_DEBUG , fmt , ## args) +#define LDBG(lun,fmt,args...) \ + yprintk(lun , KERN_DEBUG , fmt , ## args) +#define MDBG(fmt,args...) \ + printk(KERN_DEBUG DRIVER_NAME ": " fmt , ## args) +#else +#define DBG(fsg,fmt,args...) \ + do { } while (0) +#define LDBG(lun,fmt,args...) \ + do { } while (0) +#define MDBG(fmt,args...) \ + do { } while (0) +#undef VERBOSE +#undef DUMP_MSGS +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDBG DBG +#define VLDBG LDBG +#else +#define VDBG(fsg,fmt,args...) \ + do { } while (0) +#define VLDBG(lun,fmt,args...) \ + do { } while (0) +#endif /* VERBOSE */ + +#define ERROR(fsg,fmt,args...) \ + xprintk(fsg , KERN_ERR , fmt , ## args) +#define LERROR(lun,fmt,args...) \ + yprintk(lun , KERN_ERR , fmt , ## args) + +#define WARN(fsg,fmt,args...) \ + xprintk(fsg , KERN_WARNING , fmt , ## args) +#define LWARN(lun,fmt,args...) \ + yprintk(lun , KERN_WARNING , fmt , ## args) + +#define INFO(fsg,fmt,args...) \ + xprintk(fsg , KERN_INFO , fmt , ## args) +#define LINFO(lun,fmt,args...) \ + yprintk(lun , KERN_INFO , fmt , ## args) + +#define MINFO(fmt,args...) \ + printk(KERN_INFO DRIVER_NAME ": " fmt , ## args) + + +/*-------------------------------------------------------------------------*/ + +/* Encapsulate the module parameter settings */ + +#define MAX_LUNS 8 + + /* Arggh! There should be a module_param_array_named macro! */ +static char *file[MAX_LUNS] = {NULL, }; +static int ro[MAX_LUNS] = {0, }; + +static struct { + int num_filenames; + int num_ros; + unsigned int nluns; + + char *transport_parm; + char *protocol_parm; + int removable; + unsigned short vendor; + unsigned short product; + unsigned short release; + unsigned int buflen; + int can_stall; + + int transport_type; + char *transport_name; + int protocol_type; + char *protocol_name; + +} mod_data = { // Default values + .transport_parm = "BBB", + .protocol_parm = "SCSI", + .removable = 0, + .vendor = DRIVER_VENDOR_ID, + .product = DRIVER_PRODUCT_ID, + .release = 0xffff, // Use controller chip type + .buflen = 16384, + .can_stall = 1, + }; + + +module_param_array(file, charp, &mod_data.num_filenames, S_IRUGO); +MODULE_PARM_DESC(file, "names of backing files or devices"); + +module_param_array(ro, bool, &mod_data.num_ros, S_IRUGO); +MODULE_PARM_DESC(ro, "true to force read-only"); + +module_param_named(luns, mod_data.nluns, uint, S_IRUGO); +MODULE_PARM_DESC(luns, "number of LUNs"); + +module_param_named(removable, mod_data.removable, bool, S_IRUGO); +MODULE_PARM_DESC(removable, "true to simulate removable media"); + + +/* In the non-TEST version, only the module parameters listed above + * are available. */ +#ifdef CONFIG_USB_FILE_STORAGE_TEST + +module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); +MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); + +module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); +MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " + "8070, or SCSI)"); + +module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); +MODULE_PARM_DESC(vendor, "USB Vendor ID"); + +module_param_named(product, mod_data.product, ushort, S_IRUGO); +MODULE_PARM_DESC(product, "USB Product ID"); + +module_param_named(release, mod_data.release, ushort, S_IRUGO); +MODULE_PARM_DESC(release, "USB release number"); + +module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); +MODULE_PARM_DESC(buflen, "I/O buffer size"); + +module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); +MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); + +#endif /* CONFIG_USB_FILE_STORAGE_TEST */ + + +/*-------------------------------------------------------------------------*/ + +/* USB protocol value = the transport method */ +#define USB_PR_CBI 0x00 // Control/Bulk/Interrupt +#define USB_PR_CB 0x01 // Control/Bulk w/o interrupt +#define USB_PR_BULK 0x50 // Bulk-only + +/* USB subclass value = the protocol encapsulation */ +#define USB_SC_RBC 0x01 // Reduced Block Commands (flash) +#define USB_SC_8020 0x02 // SFF-8020i, MMC-2, ATAPI (CD-ROM) +#define USB_SC_QIC 0x03 // QIC-157 (tape) +#define USB_SC_UFI 0x04 // UFI (floppy) +#define USB_SC_8070 0x05 // SFF-8070i (removable) +#define USB_SC_SCSI 0x06 // Transparent SCSI + +/* Bulk-only data structures */ + +/* Command Block Wrapper */ +struct bulk_cb_wrap { + __le32 Signature; // Contains 'USBC' + u32 Tag; // Unique per command id + __le32 DataTransferLength; // Size of the data + u8 Flags; // Direction in bit 7 + u8 Lun; // LUN (normally 0) + u8 Length; // Of the CDB, <= MAX_COMMAND_SIZE + u8 CDB[16]; // Command Data Block +}; + +#define USB_BULK_CB_WRAP_LEN 31 +#define USB_BULK_CB_SIG 0x43425355 // Spells out USBC +#define USB_BULK_IN_FLAG 0x80 + +/* Command Status Wrapper */ +struct bulk_cs_wrap { + __le32 Signature; // Should = 'USBS' + u32 Tag; // Same as original command + __le32 Residue; // Amount not transferred + u8 Status; // See below +}; + +#define USB_BULK_CS_WRAP_LEN 13 +#define USB_BULK_CS_SIG 0x53425355 // Spells out 'USBS' +#define USB_STATUS_PASS 0 +#define USB_STATUS_FAIL 1 +#define USB_STATUS_PHASE_ERROR 2 + +/* Bulk-only class specific requests */ +#define USB_BULK_RESET_REQUEST 0xff +#define USB_BULK_GET_MAX_LUN_REQUEST 0xfe + + +/* CBI Interrupt data structure */ +struct interrupt_data { + u8 bType; + u8 bValue; +}; + +#define CBI_INTERRUPT_DATA_LEN 2 + +/* CBI Accept Device-Specific Command request */ +#define USB_CBI_ADSC_REQUEST 0x00 + + +#define MAX_COMMAND_SIZE 16 // Length of a SCSI Command Data Block + +/* SCSI commands that we recognize */ +#define SC_FORMAT_UNIT 0x04 +#define SC_INQUIRY 0x12 +#define SC_MODE_SELECT_6 0x15 +#define SC_MODE_SELECT_10 0x55 +#define SC_MODE_SENSE_6 0x1a +#define SC_MODE_SENSE_10 0x5a +#define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e +#define SC_READ_6 0x08 +#define SC_READ_10 0x28 +#define SC_READ_12 0xa8 +#define SC_READ_CAPACITY 0x25 +#define SC_READ_FORMAT_CAPACITIES 0x23 +#define SC_RELEASE 0x17 +#define SC_REQUEST_SENSE 0x03 +#define SC_RESERVE 0x16 +#define SC_SEND_DIAGNOSTIC 0x1d +#define SC_START_STOP_UNIT 0x1b +#define SC_SYNCHRONIZE_CACHE 0x35 +#define SC_TEST_UNIT_READY 0x00 +#define SC_VERIFY 0x2f +#define SC_WRITE_6 0x0a +#define SC_WRITE_10 0x2a +#define SC_WRITE_12 0xaa + +/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ +#define SS_NO_SENSE 0 +#define SS_COMMUNICATION_FAILURE 0x040800 +#define SS_INVALID_COMMAND 0x052000 +#define SS_INVALID_FIELD_IN_CDB 0x052400 +#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 +#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 +#define SS_MEDIUM_NOT_PRESENT 0x023a00 +#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 +#define SS_NOT_READY_TO_READY_TRANSITION 0x062800 +#define SS_RESET_OCCURRED 0x062900 +#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 +#define SS_UNRECOVERED_READ_ERROR 0x031100 +#define SS_WRITE_ERROR 0x030c02 +#define SS_WRITE_PROTECTED 0x072700 + +#define SK(x) ((u8) ((x) >> 16)) // Sense Key byte, etc. +#define ASC(x) ((u8) ((x) >> 8)) +#define ASCQ(x) ((u8) (x)) + + +/*-------------------------------------------------------------------------*/ + +/* + * These definitions will permit the compiler to avoid generating code for + * parts of the driver that aren't used in the non-TEST version. Even gcc + * can recognize when a test of a constant expression yields a dead code + * path. + */ + +#ifdef CONFIG_USB_FILE_STORAGE_TEST + +#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) +#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) +#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) + +#else + +#define transport_is_bbb() 1 +#define transport_is_cbi() 0 +#define protocol_is_scsi() 1 + +#endif /* CONFIG_USB_FILE_STORAGE_TEST */ + + +struct lun { + struct file *filp; + loff_t file_length; + loff_t num_sectors; + + unsigned int ro : 1; + unsigned int prevent_medium_removal : 1; + unsigned int registered : 1; + + u32 sense_data; + u32 sense_data_info; + u32 unit_attention_data; + + struct device dev; +}; + +#define backing_file_is_open(curlun) ((curlun)->filp != NULL) + +static inline struct lun *dev_to_lun(struct device *dev) +{ + return container_of(dev, struct lun, dev); +} + + +/* Big enough to hold our biggest descriptor */ +#define EP0_BUFSIZE 256 +#define DELAYED_STATUS (EP0_BUFSIZE + 999) // An impossibly large value + +/* Number of buffers we will use. 2 is enough for double-buffering */ +#define NUM_BUFFERS 2 + +enum fsg_buffer_state { + BUF_STATE_EMPTY = 0, + BUF_STATE_FULL, + BUF_STATE_BUSY +}; + +struct fsg_buffhd { + void *buf; + dma_addr_t dma; + volatile enum fsg_buffer_state state; + struct fsg_buffhd *next; + + /* The NetChip 2280 is faster, and handles some protocol faults + * better, if we don't submit any short bulk-out read requests. + * So we will record the intended request length here. */ + unsigned int bulk_out_intended_length; + + struct usb_request *inreq; + volatile int inreq_busy; + struct usb_request *outreq; + volatile int outreq_busy; +}; + +enum fsg_state { + FSG_STATE_COMMAND_PHASE = -10, // This one isn't used anywhere + FSG_STATE_DATA_PHASE, + FSG_STATE_STATUS_PHASE, + + FSG_STATE_IDLE = 0, + FSG_STATE_ABORT_BULK_OUT, + FSG_STATE_RESET, + FSG_STATE_INTERFACE_CHANGE, + FSG_STATE_CONFIG_CHANGE, + FSG_STATE_DISCONNECT, + FSG_STATE_EXIT, + FSG_STATE_TERMINATED +}; + +enum data_direction { + DATA_DIR_UNKNOWN = 0, + DATA_DIR_FROM_HOST, + DATA_DIR_TO_HOST, + DATA_DIR_NONE +}; + +struct fsg_dev { + /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ + spinlock_t lock; + struct usb_gadget *gadget; + + /* filesem protects: backing files in use */ + struct rw_semaphore filesem; + + struct usb_ep *ep0; // Handy copy of gadget->ep0 + struct usb_request *ep0req; // For control responses + volatile unsigned int ep0_req_tag; + const char *ep0req_name; + + struct usb_request *intreq; // For interrupt responses + volatile int intreq_busy; + struct fsg_buffhd *intr_buffhd; + + unsigned int bulk_out_maxpacket; + enum fsg_state state; // For exception handling + unsigned int exception_req_tag; + + u8 config, new_config; + + unsigned int running : 1; + unsigned int bulk_in_enabled : 1; + unsigned int bulk_out_enabled : 1; + unsigned int intr_in_enabled : 1; + unsigned int phase_error : 1; + unsigned int short_packet_received : 1; + unsigned int bad_lun_okay : 1; + + unsigned long atomic_bitflags; +#define REGISTERED 0 +#define CLEAR_BULK_HALTS 1 +#define SUSPENDED 2 + + struct usb_ep *bulk_in; + struct usb_ep *bulk_out; + struct usb_ep *intr_in; + + struct fsg_buffhd *next_buffhd_to_fill; + struct fsg_buffhd *next_buffhd_to_drain; + struct fsg_buffhd buffhds[NUM_BUFFERS]; + + wait_queue_head_t thread_wqh; + int thread_wakeup_needed; + struct completion thread_notifier; + int thread_pid; + struct task_struct *thread_task; + sigset_t thread_signal_mask; + + int cmnd_size; + u8 cmnd[MAX_COMMAND_SIZE]; + enum data_direction data_dir; + u32 data_size; + u32 data_size_from_cmnd; + u32 tag; + unsigned int lun; + u32 residue; + u32 usb_amount_left; + + /* The CB protocol offers no way for a host to know when a command + * has completed. As a result the next command may arrive early, + * and we will still have to handle it. For that reason we need + * a buffer to store new commands when using CB (or CBI, which + * does not oblige a host to wait for command completion either). */ + int cbbuf_cmnd_size; + u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; + + unsigned int nluns; + struct lun *luns; + struct lun *curlun; + struct completion lun_released; +}; + +typedef void (*fsg_routine_t)(struct fsg_dev *); + +static int inline exception_in_progress(struct fsg_dev *fsg) +{ + return (fsg->state > FSG_STATE_IDLE); +} + +/* Make bulk-out requests be divisible by the maxpacket size */ +static void inline set_bulk_out_req_length(struct fsg_dev *fsg, + struct fsg_buffhd *bh, unsigned int length) +{ + unsigned int rem; + + bh->bulk_out_intended_length = length; + rem = length % fsg->bulk_out_maxpacket; + if (rem > 0) + length += fsg->bulk_out_maxpacket - rem; + bh->outreq->length = length; +} + +static struct fsg_dev *the_fsg; +static struct usb_gadget_driver fsg_driver; + +static void close_backing_file(struct lun *curlun); +static void close_all_backing_files(struct fsg_dev *fsg); + + +/*-------------------------------------------------------------------------*/ + +#ifdef DUMP_MSGS + +static void dump_msg(struct fsg_dev *fsg, const char *label, + const u8 *buf, unsigned int length) +{ + unsigned int start, num, i; + char line[52], *p; + + if (length >= 512) + return; + DBG(fsg, "%s, length %u:\n", label, length); + + start = 0; + while (length > 0) { + num = min(length, 16u); + p = line; + for (i = 0; i < num; ++i) { + if (i == 8) + *p++ = ' '; + sprintf(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + printk(KERN_DEBUG "%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +} + +static void inline dump_cdb(struct fsg_dev *fsg) +{} + +#else + +static void inline dump_msg(struct fsg_dev *fsg, const char *label, + const u8 *buf, unsigned int length) +{} + +static void inline dump_cdb(struct fsg_dev *fsg) +{ + int i; + char cmdbuf[3*MAX_COMMAND_SIZE + 1]; + + for (i = 0; i < fsg->cmnd_size; ++i) + sprintf(cmdbuf + i*3, " %02x", fsg->cmnd[i]); + VDBG(fsg, "SCSI CDB: %s\n", cmdbuf); +} + +#endif /* DUMP_MSGS */ + + +static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) +{ + const char *name; + + if (ep == fsg->bulk_in) + name = "bulk-in"; + else if (ep == fsg->bulk_out) + name = "bulk-out"; + else + name = ep->name; + DBG(fsg, "%s set halt\n", name); + return usb_ep_set_halt(ep); +} + + +/*-------------------------------------------------------------------------*/ + +/* Routines for unaligned data access */ + +static u16 inline get_be16(u8 *buf) +{ + return ((u16) buf[0] << 8) | ((u16) buf[1]); +} + +static u32 inline get_be32(u8 *buf) +{ + return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) | + ((u32) buf[2] << 8) | ((u32) buf[3]); +} + +static void inline put_be16(u8 *buf, u16 val) +{ + buf[0] = val >> 8; + buf[1] = val; +} + +static void inline put_be32(u8 *buf, u32 val) +{ + buf[0] = val >> 24; + buf[1] = val >> 16; + buf[2] = val >> 8; + buf[3] = val; +} + + +/*-------------------------------------------------------------------------*/ + +/* + * DESCRIPTORS ... most are static, but strings and (full) configuration + * descriptors are built on demand. Also the (static) config and interface + * descriptors are adjusted during fsg_bind(). + */ +#define STRING_MANUFACTURER 1 +#define STRING_PRODUCT 2 +#define STRING_SERIAL 3 +#define STRING_CONFIG 4 +#define STRING_INTERFACE 5 + +/* There is only one configuration. */ +#define CONFIG_VALUE 1 + +static struct usb_device_descriptor +device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_PER_INTERFACE, + + /* The next three values can be overridden by module parameters */ + .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID), + .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID), + .bcdDevice = __constant_cpu_to_le16(0xffff), + + .iManufacturer = STRING_MANUFACTURER, + .iProduct = STRING_PRODUCT, + .iSerialNumber = STRING_SERIAL, + .bNumConfigurations = 1, +}; + +static struct usb_config_descriptor +config_desc = { + .bLength = sizeof config_desc, + .bDescriptorType = USB_DT_CONFIG, + + /* wTotalLength computed by usb_gadget_config_buf() */ + .bNumInterfaces = 1, + .bConfigurationValue = CONFIG_VALUE, + .iConfiguration = STRING_CONFIG, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 1, // self-powered +}; + +static struct usb_otg_descriptor +otg_desc = { + .bLength = sizeof(otg_desc), + .bDescriptorType = USB_DT_OTG, + + .bmAttributes = USB_OTG_SRP, +}; + +/* There is only one interface. */ + +static struct usb_interface_descriptor +intf_desc = { + .bLength = sizeof intf_desc, + .bDescriptorType = USB_DT_INTERFACE, + + .bNumEndpoints = 2, // Adjusted during fsg_bind() + .bInterfaceClass = USB_CLASS_MASS_STORAGE, + .bInterfaceSubClass = USB_SC_SCSI, // Adjusted during fsg_bind() + .bInterfaceProtocol = USB_PR_BULK, // Adjusted during fsg_bind() + .iInterface = STRING_INTERFACE, +}; + +/* Three full-speed endpoint descriptors: bulk-in, bulk-out, + * and interrupt-in. */ + +static struct usb_endpoint_descriptor +fs_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + /* wMaxPacketSize set by autoconfiguration */ +}; + +static struct usb_endpoint_descriptor +fs_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + /* wMaxPacketSize set by autoconfiguration */ +}; + +static struct usb_endpoint_descriptor +fs_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16(2), + .bInterval = 32, // frames -> 32 ms +}; + +static const struct usb_descriptor_header *fs_function[] = { + (struct usb_descriptor_header *) &otg_desc, + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &fs_bulk_in_desc, + (struct usb_descriptor_header *) &fs_bulk_out_desc, + (struct usb_descriptor_header *) &fs_intr_in_desc, + NULL, +}; +#define FS_FUNCTION_PRE_EP_ENTRIES 2 + + +#ifdef CONFIG_USB_GADGET_DUALSPEED + +/* + * USB 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + * + * That means alternate endpoint descriptors (bigger packets) + * and a "device qualifier" ... plus more construction options + * for the config descriptor. + */ +static struct usb_qualifier_descriptor +dev_qualifier = { + .bLength = sizeof dev_qualifier, + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_PER_INTERFACE, + + .bNumConfigurations = 1, +}; + +static struct usb_endpoint_descriptor +hs_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor +hs_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), + .bInterval = 1, // NAK every 1 uframe +}; + +static struct usb_endpoint_descriptor +hs_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16(2), + .bInterval = 9, // 2**(9-1) = 256 uframes -> 32 ms +}; + +static const struct usb_descriptor_header *hs_function[] = { + (struct usb_descriptor_header *) &otg_desc, + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &hs_bulk_in_desc, + (struct usb_descriptor_header *) &hs_bulk_out_desc, + (struct usb_descriptor_header *) &hs_intr_in_desc, + NULL, +}; +#define HS_FUNCTION_PRE_EP_ENTRIES 2 + +/* Maxpacket and other transfer characteristics vary by speed. */ +#define ep_desc(g,fs,hs) (((g)->speed==USB_SPEED_HIGH) ? (hs) : (fs)) + +#else + +/* If there's no high speed support, always use the full-speed descriptor. */ +#define ep_desc(g,fs,hs) fs + +#endif /* !CONFIG_USB_GADGET_DUALSPEED */ + + +/* The CBI specification limits the serial string to 12 uppercase hexadecimal + * characters. */ +static char manufacturer[64]; +static char serial[13]; + +/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ +static struct usb_string strings[] = { + {STRING_MANUFACTURER, manufacturer}, + {STRING_PRODUCT, longname}, + {STRING_SERIAL, serial}, + {STRING_CONFIG, "Self-powered"}, + {STRING_INTERFACE, "Mass Storage"}, + {} +}; + +static struct usb_gadget_strings stringtab = { + .language = 0x0409, // en-us + .strings = strings, +}; + + +/* + * Config descriptors must agree with the code that sets configurations + * and with code managing interfaces and their altsettings. They must + * also handle different speeds and other-speed requests. + */ +static int populate_config_buf(struct usb_gadget *gadget, + u8 *buf, u8 type, unsigned index) +{ +#ifdef CONFIG_USB_GADGET_DUALSPEED + enum usb_device_speed speed = gadget->speed; +#endif + int len; + const struct usb_descriptor_header **function; + + if (index > 0) + return -EINVAL; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + if (type == USB_DT_OTHER_SPEED_CONFIG) + speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; + if (speed == USB_SPEED_HIGH) + function = hs_function; + else +#endif + function = fs_function; + + /* for now, don't advertise srp-only devices */ + if (!gadget->is_otg) + function++; + + len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); + ((struct usb_config_descriptor *) buf)->bDescriptorType = type; + return len; +} + + +/*-------------------------------------------------------------------------*/ + +/* These routines may be called in process context or in_irq */ + +static void wakeup_thread(struct fsg_dev *fsg) +{ + /* Tell the main thread that something has happened */ + fsg->thread_wakeup_needed = 1; + wake_up_all(&fsg->thread_wqh); +} + + +static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) +{ + unsigned long flags; + struct task_struct *thread_task; + + /* Do nothing if a higher-priority exception is already in progress. + * If a lower-or-equal priority exception is in progress, preempt it + * and notify the main thread by sending it a signal. */ + spin_lock_irqsave(&fsg->lock, flags); + if (fsg->state <= new_state) { + fsg->exception_req_tag = fsg->ep0_req_tag; + fsg->state = new_state; + thread_task = fsg->thread_task; + if (thread_task) + send_sig_info(SIGUSR1, SEND_SIG_FORCED, thread_task); + } + spin_unlock_irqrestore(&fsg->lock, flags); +} + + +/*-------------------------------------------------------------------------*/ + +/* The disconnect callback and ep0 routines. These always run in_irq, + * except that ep0_queue() is called in the main thread to acknowledge + * completion of various requests: set config, set interface, and + * Bulk-only device reset. */ + +static void fsg_disconnect(struct usb_gadget *gadget) +{ + struct fsg_dev *fsg = get_gadget_data(gadget); + + DBG(fsg, "disconnect or port reset\n"); + raise_exception(fsg, FSG_STATE_DISCONNECT); +} + + +static int ep0_queue(struct fsg_dev *fsg) +{ + int rc; + + rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); + if (rc != 0 && rc != -ESHUTDOWN) { + + /* We can't do much more than wait for a reset */ + WARN(fsg, "error in submission: %s --> %d\n", + fsg->ep0->name, rc); + } + return rc; +} + +static void ep0_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; + + if (req->actual > 0) + dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); + if (req->status || req->actual != req->length) + DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + req->status, req->actual, req->length); + if (req->status == -ECONNRESET) // Request was cancelled + usb_ep_fifo_flush(ep); + + if (req->status == 0 && req->context) + ((fsg_routine_t) (req->context))(fsg); +} + + +/*-------------------------------------------------------------------------*/ + +/* Bulk and interrupt endpoint completion handlers. + * These always run in_irq. */ + +static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; + struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context; + + if (req->status || req->actual != req->length) + DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + req->status, req->actual, req->length); + if (req->status == -ECONNRESET) // Request was cancelled + usb_ep_fifo_flush(ep); + + /* Hold the lock while we update the request and buffer states */ + spin_lock(&fsg->lock); + bh->inreq_busy = 0; + bh->state = BUF_STATE_EMPTY; + spin_unlock(&fsg->lock); + wakeup_thread(fsg); +} + +static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; + struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context; + + dump_msg(fsg, "bulk-out", req->buf, req->actual); + if (req->status || req->actual != bh->bulk_out_intended_length) + DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + req->status, req->actual, + bh->bulk_out_intended_length); + if (req->status == -ECONNRESET) // Request was cancelled + usb_ep_fifo_flush(ep); + + /* Hold the lock while we update the request and buffer states */ + spin_lock(&fsg->lock); + bh->outreq_busy = 0; + bh->state = BUF_STATE_FULL; + spin_unlock(&fsg->lock); + wakeup_thread(fsg); +} + + +#ifdef CONFIG_USB_FILE_STORAGE_TEST +static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; + struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context; + + if (req->status || req->actual != req->length) + DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, + req->status, req->actual, req->length); + if (req->status == -ECONNRESET) // Request was cancelled + usb_ep_fifo_flush(ep); + + /* Hold the lock while we update the request and buffer states */ + spin_lock(&fsg->lock); + fsg->intreq_busy = 0; + bh->state = BUF_STATE_EMPTY; + spin_unlock(&fsg->lock); + wakeup_thread(fsg); +} + +#else +static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) +{} +#endif /* CONFIG_USB_FILE_STORAGE_TEST */ + + +/*-------------------------------------------------------------------------*/ + +/* Ep0 class-specific handlers. These always run in_irq. */ + +#ifdef CONFIG_USB_FILE_STORAGE_TEST +static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct usb_request *req = fsg->ep0req; + static u8 cbi_reset_cmnd[6] = { + SC_SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; + + /* Error in command transfer? */ + if (req->status || req->length != req->actual || + req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { + + /* Not all controllers allow a protocol stall after + * receiving control-out data, but we'll try anyway. */ + fsg_set_halt(fsg, fsg->ep0); + return; // Wait for reset + } + + /* Is it the special reset command? */ + if (req->actual >= sizeof cbi_reset_cmnd && + memcmp(req->buf, cbi_reset_cmnd, + sizeof cbi_reset_cmnd) == 0) { + + /* Raise an exception to stop the current operation + * and reinitialize our state. */ + DBG(fsg, "cbi reset request\n"); + raise_exception(fsg, FSG_STATE_RESET); + return; + } + + VDBG(fsg, "CB[I] accept device-specific command\n"); + spin_lock(&fsg->lock); + + /* Save the command for later */ + if (fsg->cbbuf_cmnd_size) + WARN(fsg, "CB[I] overwriting previous command\n"); + fsg->cbbuf_cmnd_size = req->actual; + memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); + + spin_unlock(&fsg->lock); + wakeup_thread(fsg); +} + +#else +static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{} +#endif /* CONFIG_USB_FILE_STORAGE_TEST */ + + +static int class_setup_req(struct fsg_dev *fsg, + const struct usb_ctrlrequest *ctrl) +{ + struct usb_request *req = fsg->ep0req; + int value = -EOPNOTSUPP; + u16 w_index = ctrl->wIndex; + u16 w_length = ctrl->wLength; + + if (!fsg->config) + return value; + + /* Handle Bulk-only class-specific requests */ + if (transport_is_bbb()) { + switch (ctrl->bRequest) { + + case USB_BULK_RESET_REQUEST: + if (ctrl->bRequestType != (USB_DIR_OUT | + USB_TYPE_CLASS | USB_RECIP_INTERFACE)) + break; + if (w_index != 0) { + value = -EDOM; + break; + } + + /* Raise an exception to stop the current operation + * and reinitialize our state. */ + DBG(fsg, "bulk reset request\n"); + raise_exception(fsg, FSG_STATE_RESET); + value = DELAYED_STATUS; + break; + + case USB_BULK_GET_MAX_LUN_REQUEST: + if (ctrl->bRequestType != (USB_DIR_IN | + USB_TYPE_CLASS | USB_RECIP_INTERFACE)) + break; + if (w_index != 0) { + value = -EDOM; + break; + } + VDBG(fsg, "get max LUN\n"); + *(u8 *) req->buf = fsg->nluns - 1; + value = min(w_length, (u16) 1); + break; + } + } + + /* Handle CBI class-specific requests */ + else { + switch (ctrl->bRequest) { + + case USB_CBI_ADSC_REQUEST: + if (ctrl->bRequestType != (USB_DIR_OUT | + USB_TYPE_CLASS | USB_RECIP_INTERFACE)) + break; + if (w_index != 0) { + value = -EDOM; + break; + } + if (w_length > MAX_COMMAND_SIZE) { + value = -EOVERFLOW; + break; + } + value = w_length; + fsg->ep0req->context = received_cbi_adsc; + break; + } + } + + if (value == -EOPNOTSUPP) + VDBG(fsg, + "unknown class-specific control req " + "%02x.%02x v%04x i%04x l%u\n", + ctrl->bRequestType, ctrl->bRequest, + ctrl->wValue, w_index, w_length); + return value; +} + + +/*-------------------------------------------------------------------------*/ + +/* Ep0 standard request handlers. These always run in_irq. */ + +static int standard_setup_req(struct fsg_dev *fsg, + const struct usb_ctrlrequest *ctrl) +{ + struct usb_request *req = fsg->ep0req; + int value = -EOPNOTSUPP; + u16 w_index = ctrl->wIndex; + u16 w_value = ctrl->wValue; + u16 w_length = ctrl->wLength; + + /* Usually this just stores reply data in the pre-allocated ep0 buffer, + * but config change events will also reconfigure hardware. */ + switch (ctrl->bRequest) { + + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | + USB_RECIP_DEVICE)) + break; + switch (w_value >> 8) { + + case USB_DT_DEVICE: + VDBG(fsg, "get device descriptor\n"); + value = min(w_length, (u16) sizeof device_desc); + memcpy(req->buf, &device_desc, value); + break; +#ifdef CONFIG_USB_GADGET_DUALSPEED + case USB_DT_DEVICE_QUALIFIER: + VDBG(fsg, "get device qualifier\n"); + if (!fsg->gadget->is_dualspeed) + break; + value = min(w_length, (u16) sizeof dev_qualifier); + memcpy(req->buf, &dev_qualifier, value); + break; + + case USB_DT_OTHER_SPEED_CONFIG: + VDBG(fsg, "get other-speed config descriptor\n"); + if (!fsg->gadget->is_dualspeed) + break; + goto get_config; +#endif + case USB_DT_CONFIG: + VDBG(fsg, "get configuration descriptor\n"); +#ifdef CONFIG_USB_GADGET_DUALSPEED + get_config: +#endif + value = populate_config_buf(fsg->gadget, + req->buf, + w_value >> 8, + w_value & 0xff); + if (value >= 0) + value = min(w_length, (u16) value); + break; + + case USB_DT_STRING: + VDBG(fsg, "get string descriptor\n"); + + /* wIndex == language code */ + value = usb_gadget_get_string(&stringtab, + w_value & 0xff, req->buf); + if (value >= 0) + value = min(w_length, (u16) value); + break; + } + break; + + /* One config, two speeds */ + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | + USB_RECIP_DEVICE)) + break; + VDBG(fsg, "set configuration\n"); + if (w_value == CONFIG_VALUE || w_value == 0) { + fsg->new_config = w_value; + + /* Raise an exception to wipe out previous transaction + * state (queued bufs, etc) and set the new config. */ + raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); + value = DELAYED_STATUS; + } + break; + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | + USB_RECIP_DEVICE)) + break; + VDBG(fsg, "get configuration\n"); + *(u8 *) req->buf = fsg->config; + value = min(w_length, (u16) 1); + break; + + case USB_REQ_SET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | + USB_RECIP_INTERFACE)) + break; + if (fsg->config && w_index == 0) { + + /* Raise an exception to wipe out previous transaction + * state (queued bufs, etc) and install the new + * interface altsetting. */ + raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); + value = DELAYED_STATUS; + } + break; + case USB_REQ_GET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | + USB_RECIP_INTERFACE)) + break; + if (!fsg->config) + break; + if (w_index != 0) { + value = -EDOM; + break; + } + VDBG(fsg, "get interface\n"); + *(u8 *) req->buf = 0; + value = min(w_length, (u16) 1); + break; + + default: + VDBG(fsg, + "unknown control req %02x.%02x v%04x i%04x l%u\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + } + + return value; +} + + +static int fsg_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + struct fsg_dev *fsg = get_gadget_data(gadget); + int rc; + + ++fsg->ep0_req_tag; // Record arrival of a new request + fsg->ep0req->context = NULL; + fsg->ep0req->length = 0; + dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) + rc = class_setup_req(fsg, ctrl); + else + rc = standard_setup_req(fsg, ctrl); + + /* Respond with data/status or defer until later? */ + if (rc >= 0 && rc != DELAYED_STATUS) { + fsg->ep0req->length = rc; + fsg->ep0req->zero = (rc < ctrl->wLength && + (rc % gadget->ep0->maxpacket) == 0); + fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? + "ep0-in" : "ep0-out"); + rc = ep0_queue(fsg); + } + + /* Device either stalls (rc < 0) or reports success */ + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +/* All the following routines run in process context */ + + +/* Use this for bulk or interrupt transfers, not ep0 */ +static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, + struct usb_request *req, volatile int *pbusy, + volatile enum fsg_buffer_state *state) +{ + int rc; + + if (ep == fsg->bulk_in) + dump_msg(fsg, "bulk-in", req->buf, req->length); + else if (ep == fsg->intr_in) + dump_msg(fsg, "intr-in", req->buf, req->length); + *pbusy = 1; + *state = BUF_STATE_BUSY; + rc = usb_ep_queue(ep, req, GFP_KERNEL); + if (rc != 0) { + *pbusy = 0; + *state = BUF_STATE_EMPTY; + + /* We can't do much more than wait for a reset */ + + /* Note: currently the net2280 driver fails zero-length + * submissions if DMA is enabled. */ + if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && + req->length == 0)) + WARN(fsg, "error in submission: %s --> %d\n", + ep->name, rc); + } +} + + +static int sleep_thread(struct fsg_dev *fsg) +{ + int rc; + + /* Wait until a signal arrives or we are woken up */ + rc = wait_event_interruptible(fsg->thread_wqh, + fsg->thread_wakeup_needed); + fsg->thread_wakeup_needed = 0; + if (current->flags & PF_FREEZE) + refrigerator(PF_FREEZE); + return (rc ? -EINTR : 0); +} + + +/*-------------------------------------------------------------------------*/ + +static int do_read(struct fsg_dev *fsg) +{ + struct lun *curlun = fsg->curlun; + u32 lba; + struct fsg_buffhd *bh; + int rc; + u32 amount_left; + loff_t file_offset, file_offset_tmp; + unsigned int amount; + unsigned int partial_page; + ssize_t nread; + + /* Get the starting Logical Block Address and check that it's + * not too big */ + if (fsg->cmnd[0] == SC_READ_6) + lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]); + else { + lba = get_be32(&fsg->cmnd[2]); + + /* We allow DPO (Disable Page Out = don't save data in the + * cache) and FUA (Force Unit Access = don't read from the + * cache), but we don't implement them. */ + if ((fsg->cmnd[1] & ~0x18) != 0) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + file_offset = ((loff_t) lba) << 9; + + /* Carry out the file reads */ + amount_left = fsg->data_size_from_cmnd; + if (unlikely(amount_left == 0)) + return -EIO; // No default reply + + for (;;) { + + /* Figure out how much we need to read: + * Try to read the remaining amount. + * But don't read more than the buffer size. + * And don't try to read past the end of the file. + * Finally, if we're not at a page boundary, don't read past + * the next page. + * If this means reading 0 then we were asked to read past + * the end of file. */ + amount = min((unsigned int) amount_left, mod_data.buflen); + amount = min((loff_t) amount, + curlun->file_length - file_offset); + partial_page = file_offset & (PAGE_CACHE_SIZE - 1); + if (partial_page > 0) + amount = min(amount, (unsigned int) PAGE_CACHE_SIZE - + partial_page); + + /* Wait for the next buffer to become available */ + bh = fsg->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + + /* If we were asked to read past the end of file, + * end with an empty buffer. */ + if (amount == 0) { + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->sense_data_info = file_offset >> 9; + bh->inreq->length = 0; + bh->state = BUF_STATE_FULL; + break; + } + + /* Perform the read */ + file_offset_tmp = file_offset; + nread = vfs_read(curlun->filp, + (char __user *) bh->buf, + amount, &file_offset_tmp); + VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, + (unsigned long long) file_offset, + (int) nread); + if (signal_pending(current)) + return -EINTR; + + if (nread < 0) { + LDBG(curlun, "error in file read: %d\n", + (int) nread); + nread = 0; + } else if (nread < amount) { + LDBG(curlun, "partial file read: %d/%u\n", + (int) nread, amount); + nread -= (nread & 511); // Round down to a block + } + file_offset += nread; + amount_left -= nread; + fsg->residue -= nread; + bh->inreq->length = nread; + bh->state = BUF_STATE_FULL; + + /* If an error occurred, report it and its position */ + if (nread < amount) { + curlun->sense_data = SS_UNRECOVERED_READ_ERROR; + curlun->sense_data_info = file_offset >> 9; + break; + } + + if (amount_left == 0) + break; // No more left to read + + /* Send this buffer and go read some more */ + bh->inreq->zero = 0; + start_transfer(fsg, fsg->bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state); + fsg->next_buffhd_to_fill = bh->next; + } + + return -EIO; // No default reply +} + + +/*-------------------------------------------------------------------------*/ + +static int do_write(struct fsg_dev *fsg) +{ + struct lun *curlun = fsg->curlun; + u32 lba; + struct fsg_buffhd *bh; + int get_some_more; + u32 amount_left_to_req, amount_left_to_write; + loff_t usb_offset, file_offset, file_offset_tmp; + unsigned int amount; + unsigned int partial_page; + ssize_t nwritten; + int rc; + + if (curlun->ro) { + curlun->sense_data = SS_WRITE_PROTECTED; + return -EINVAL; + } + curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait + + /* Get the starting Logical Block Address and check that it's + * not too big */ + if (fsg->cmnd[0] == SC_WRITE_6) + lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]); + else { + lba = get_be32(&fsg->cmnd[2]); + + /* We allow DPO (Disable Page Out = don't save data in the + * cache) and FUA (Force Unit Access = write directly to the + * medium). We don't implement DPO; we implement FUA by + * performing synchronous output. */ + if ((fsg->cmnd[1] & ~0x18) != 0) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + if (fsg->cmnd[1] & 0x08) // FUA + curlun->filp->f_flags |= O_SYNC; + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + /* Carry out the file writes */ + get_some_more = 1; + file_offset = usb_offset = ((loff_t) lba) << 9; + amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; + + while (amount_left_to_write > 0) { + + /* Queue a request for more data from the host */ + bh = fsg->next_buffhd_to_fill; + if (bh->state == BUF_STATE_EMPTY && get_some_more) { + + /* Figure out how much we want to get: + * Try to get the remaining amount. + * But don't get more than the buffer size. + * And don't try to go past the end of the file. + * If we're not at a page boundary, + * don't go past the next page. + * If this means getting 0, then we were asked + * to write past the end of file. + * Finally, round down to a block boundary. */ + amount = min(amount_left_to_req, mod_data.buflen); + amount = min((loff_t) amount, curlun->file_length - + usb_offset); + partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); + if (partial_page > 0) + amount = min(amount, + (unsigned int) PAGE_CACHE_SIZE - partial_page); + + if (amount == 0) { + get_some_more = 0; + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->sense_data_info = usb_offset >> 9; + continue; + } + amount -= (amount & 511); + if (amount == 0) { + + /* Why were we were asked to transfer a + * partial block? */ + get_some_more = 0; + continue; + } + + /* Get the next buffer */ + usb_offset += amount; + fsg->usb_amount_left -= amount; + amount_left_to_req -= amount; + if (amount_left_to_req == 0) + get_some_more = 0; + + /* amount is always divisible by 512, hence by + * the bulk-out maxpacket size */ + bh->outreq->length = bh->bulk_out_intended_length = + amount; + start_transfer(fsg, fsg->bulk_out, bh->outreq, + &bh->outreq_busy, &bh->state); + fsg->next_buffhd_to_fill = bh->next; + continue; + } + + /* Write the received data to the backing file */ + bh = fsg->next_buffhd_to_drain; + if (bh->state == BUF_STATE_EMPTY && !get_some_more) + break; // We stopped early + if (bh->state == BUF_STATE_FULL) { + fsg->next_buffhd_to_drain = bh->next; + bh->state = BUF_STATE_EMPTY; + + /* Did something go wrong with the transfer? */ + if (bh->outreq->status != 0) { + curlun->sense_data = SS_COMMUNICATION_FAILURE; + curlun->sense_data_info = file_offset >> 9; + break; + } + + amount = bh->outreq->actual; + if (curlun->file_length - file_offset < amount) { + LERROR(curlun, + "write %u @ %llu beyond end %llu\n", + amount, (unsigned long long) file_offset, + (unsigned long long) curlun->file_length); + amount = curlun->file_length - file_offset; + } + + /* Perform the write */ + file_offset_tmp = file_offset; + nwritten = vfs_write(curlun->filp, + (char __user *) bh->buf, + amount, &file_offset_tmp); + VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, + (unsigned long long) file_offset, + (int) nwritten); + if (signal_pending(current)) + return -EINTR; // Interrupted! + + if (nwritten < 0) { + LDBG(curlun, "error in file write: %d\n", + (int) nwritten); + nwritten = 0; + } else if (nwritten < amount) { + LDBG(curlun, "partial file write: %d/%u\n", + (int) nwritten, amount); + nwritten -= (nwritten & 511); + // Round down to a block + } + file_offset += nwritten; + amount_left_to_write -= nwritten; + fsg->residue -= nwritten; + + /* If an error occurred, report it and its position */ + if (nwritten < amount) { + curlun->sense_data = SS_WRITE_ERROR; + curlun->sense_data_info = file_offset >> 9; + break; + } + + /* Did the host decide to stop early? */ + if (bh->outreq->actual != bh->outreq->length) { + fsg->short_packet_received = 1; + break; + } + continue; + } + + /* Wait for something to happen */ + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + + return -EIO; // No default reply +} + + +/*-------------------------------------------------------------------------*/ + +/* Sync the file data, don't bother with the metadata. + * This code was copied from fs/buffer.c:sys_fdatasync(). */ +static int fsync_sub(struct lun *curlun) +{ + struct file *filp = curlun->filp; + struct inode *inode; + int rc, err; + + if (curlun->ro || !filp) + return 0; + if (!filp->f_op->fsync) + return -EINVAL; + + inode = filp->f_dentry->d_inode; + down(&inode->i_sem); + current->flags |= PF_SYNCWRITE; + rc = filemap_fdatawrite(inode->i_mapping); + err = filp->f_op->fsync(filp, filp->f_dentry, 1); + if (!rc) + rc = err; + err = filemap_fdatawait(inode->i_mapping); + if (!rc) + rc = err; + current->flags &= ~PF_SYNCWRITE; + up(&inode->i_sem); + VLDBG(curlun, "fdatasync -> %d\n", rc); + return rc; +} + +static void fsync_all(struct fsg_dev *fsg) +{ + int i; + + for (i = 0; i < fsg->nluns; ++i) + fsync_sub(&fsg->luns[i]); +} + +static int do_synchronize_cache(struct fsg_dev *fsg) +{ + struct lun *curlun = fsg->curlun; + int rc; + + /* We ignore the requested LBA and write out all file's + * dirty data buffers. */ + rc = fsync_sub(curlun); + if (rc) + curlun->sense_data = SS_WRITE_ERROR; + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +static void invalidate_sub(struct lun *curlun) +{ + struct file *filp = curlun->filp; + struct inode *inode = filp->f_dentry->d_inode; + unsigned long rc; + + rc = invalidate_inode_pages(inode->i_mapping); + VLDBG(curlun, "invalidate_inode_pages -> %ld\n", rc); +} + +static int do_verify(struct fsg_dev *fsg) +{ + struct lun *curlun = fsg->curlun; + u32 lba; + u32 verification_length; + struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; + loff_t file_offset, file_offset_tmp; + u32 amount_left; + unsigned int amount; + ssize_t nread; + + /* Get the starting Logical Block Address and check that it's + * not too big */ + lba = get_be32(&fsg->cmnd[2]); + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + /* We allow DPO (Disable Page Out = don't save data in the + * cache) but we don't implement it. */ + if ((fsg->cmnd[1] & ~0x10) != 0) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + verification_length = get_be16(&fsg->cmnd[7]); + if (unlikely(verification_length == 0)) + return -EIO; // No default reply + + /* Prepare to carry out the file verify */ + amount_left = verification_length << 9; + file_offset = ((loff_t) lba) << 9; + + /* Write out all the dirty buffers before invalidating them */ + fsync_sub(curlun); + if (signal_pending(current)) + return -EINTR; + + invalidate_sub(curlun); + if (signal_pending(current)) + return -EINTR; + + /* Just try to read the requested blocks */ + while (amount_left > 0) { + + /* Figure out how much we need to read: + * Try to read the remaining amount, but not more than + * the buffer size. + * And don't try to read past the end of the file. + * If this means reading 0 then we were asked to read + * past the end of file. */ + amount = min((unsigned int) amount_left, mod_data.buflen); + amount = min((loff_t) amount, + curlun->file_length - file_offset); + if (amount == 0) { + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->sense_data_info = file_offset >> 9; + break; + } + + /* Perform the read */ + file_offset_tmp = file_offset; + nread = vfs_read(curlun->filp, + (char __user *) bh->buf, + amount, &file_offset_tmp); + VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, + (unsigned long long) file_offset, + (int) nread); + if (signal_pending(current)) + return -EINTR; + + if (nread < 0) { + LDBG(curlun, "error in file verify: %d\n", + (int) nread); + nread = 0; + } else if (nread < amount) { + LDBG(curlun, "partial file verify: %d/%u\n", + (int) nread, amount); + nread -= (nread & 511); // Round down to a sector + } + if (nread == 0) { + curlun->sense_data = SS_UNRECOVERED_READ_ERROR; + curlun->sense_data_info = file_offset >> 9; + break; + } + file_offset += nread; + amount_left -= nread; + } + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + u8 *buf = (u8 *) bh->buf; + + static char vendor_id[] = "Linux "; + static char product_id[] = "File-Stor Gadget"; + + if (!fsg->curlun) { // Unsupported LUNs are okay + fsg->bad_lun_okay = 1; + memset(buf, 0, 36); + buf[0] = 0x7f; // Unsupported, no device-type + return 36; + } + + memset(buf, 0, 8); // Non-removable, direct-access device + if (mod_data.removable) + buf[1] = 0x80; + buf[2] = 2; // ANSI SCSI level 2 + buf[3] = 2; // SCSI-2 INQUIRY data format + buf[4] = 31; // Additional length + // No special options + sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, product_id, + mod_data.release); + return 36; +} + + +static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct lun *curlun = fsg->curlun; + u8 *buf = (u8 *) bh->buf; + u32 sd, sdinfo; + + /* + * From the SCSI-2 spec., section 7.9 (Unit attention condition): + * + * If a REQUEST SENSE command is received from an initiator + * with a pending unit attention condition (before the target + * generates the contingent allegiance condition), then the + * target shall either: + * a) report any pending sense data and preserve the unit + * attention condition on the logical unit, or, + * b) report the unit attention condition, may discard any + * pending sense data, and clear the unit attention + * condition on the logical unit for that initiator. + * + * FSG normally uses option a); enable this code to use option b). + */ +#if 0 + if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { + curlun->sense_data = curlun->unit_attention_data; + curlun->unit_attention_data = SS_NO_SENSE; + } +#endif + + if (!curlun) { // Unsupported LUNs are okay + fsg->bad_lun_okay = 1; + sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; + sdinfo = 0; + } else { + sd = curlun->sense_data; + sdinfo = curlun->sense_data_info; + curlun->sense_data = SS_NO_SENSE; + curlun->sense_data_info = 0; + } + + memset(buf, 0, 18); + buf[0] = 0x80 | 0x70; // Valid, current error + buf[2] = SK(sd); + put_be32(&buf[3], sdinfo); // Sense information + buf[7] = 18 - 8; // Additional sense length + buf[12] = ASC(sd); + buf[13] = ASCQ(sd); + return 18; +} + + +static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct lun *curlun = fsg->curlun; + u32 lba = get_be32(&fsg->cmnd[2]); + int pmi = fsg->cmnd[8]; + u8 *buf = (u8 *) bh->buf; + + /* Check the PMI and LBA fields */ + if (pmi > 1 || (pmi == 0 && lba != 0)) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + put_be32(&buf[0], curlun->num_sectors - 1); // Max logical block + put_be32(&buf[4], 512); // Block length + return 8; +} + + +static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct lun *curlun = fsg->curlun; + int mscmnd = fsg->cmnd[0]; + u8 *buf = (u8 *) bh->buf; + u8 *buf0 = buf; + int pc, page_code; + int changeable_values, all_pages; + int valid_page = 0; + int len, limit; + + if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + pc = fsg->cmnd[2] >> 6; + page_code = fsg->cmnd[2] & 0x3f; + if (pc == 3) { + curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; + return -EINVAL; + } + changeable_values = (pc == 1); + all_pages = (page_code == 0x3f); + + /* Write the mode parameter header. Fixed values are: default + * medium type, no cache control (DPOFUA), and no block descriptors. + * The only variable value is the WriteProtect bit. We will fill in + * the mode data length later. */ + memset(buf, 0, 8); + if (mscmnd == SC_MODE_SENSE_6) { + buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA + buf += 4; + limit = 255; + } else { // SC_MODE_SENSE_10 + buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA + buf += 8; + limit = 65535; // Should really be mod_data.buflen + } + + /* No block descriptors */ + + /* The mode pages, in numerical order. The only page we support + * is the Caching page. */ + if (page_code == 0x08 || all_pages) { + valid_page = 1; + buf[0] = 0x08; // Page code + buf[1] = 10; // Page length + memset(buf+2, 0, 10); // None of the fields are changeable + + if (!changeable_values) { + buf[2] = 0x04; // Write cache enable, + // Read cache not disabled + // No cache retention priorities + put_be16(&buf[4], 0xffff); // Don't disable prefetch + // Minimum prefetch = 0 + put_be16(&buf[8], 0xffff); // Maximum prefetch + put_be16(&buf[10], 0xffff); // Maximum prefetch ceiling + } + buf += 12; + } + + /* Check that a valid page was requested and the mode data length + * isn't too long. */ + len = buf - buf0; + if (!valid_page || len > limit) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + /* Store the mode data length */ + if (mscmnd == SC_MODE_SENSE_6) + buf0[0] = len - 1; + else + put_be16(buf0, len - 2); + return len; +} + + +static int do_start_stop(struct fsg_dev *fsg) +{ + struct lun *curlun = fsg->curlun; + int loej, start; + + if (!mod_data.removable) { + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; + } + + // int immed = fsg->cmnd[1] & 0x01; + loej = fsg->cmnd[4] & 0x02; + start = fsg->cmnd[4] & 0x01; + +#ifdef CONFIG_USB_FILE_STORAGE_TEST + if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed + (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + if (!start) { + + /* Are we allowed to unload the media? */ + if (curlun->prevent_medium_removal) { + LDBG(curlun, "unload attempt prevented\n"); + curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; + return -EINVAL; + } + if (loej) { // Simulate an unload/eject + up_read(&fsg->filesem); + down_write(&fsg->filesem); + close_backing_file(curlun); + up_write(&fsg->filesem); + down_read(&fsg->filesem); + } + } else { + + /* Our emulation doesn't support mounting; the medium is + * available for use as soon as it is loaded. */ + if (!backing_file_is_open(curlun)) { + curlun->sense_data = SS_MEDIUM_NOT_PRESENT; + return -EINVAL; + } + } +#endif + return 0; +} + + +static int do_prevent_allow(struct fsg_dev *fsg) +{ + struct lun *curlun = fsg->curlun; + int prevent; + + if (!mod_data.removable) { + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; + } + + prevent = fsg->cmnd[4] & 0x01; + if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + if (curlun->prevent_medium_removal && !prevent) + fsync_sub(curlun); + curlun->prevent_medium_removal = prevent; + return 0; +} + + +static int do_read_format_capacities(struct fsg_dev *fsg, + struct fsg_buffhd *bh) +{ + struct lun *curlun = fsg->curlun; + u8 *buf = (u8 *) bh->buf; + + buf[0] = buf[1] = buf[2] = 0; + buf[3] = 8; // Only the Current/Maximum Capacity Descriptor + buf += 4; + + put_be32(&buf[0], curlun->num_sectors); // Number of blocks + put_be32(&buf[4], 512); // Block length + buf[4] = 0x02; // Current capacity + return 12; +} + + +static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct lun *curlun = fsg->curlun; + + /* We don't support MODE SELECT */ + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; +} + + +/*-------------------------------------------------------------------------*/ + +static int halt_bulk_in_endpoint(struct fsg_dev *fsg) +{ + int rc; + + rc = fsg_set_halt(fsg, fsg->bulk_in); + if (rc == -EAGAIN) + VDBG(fsg, "delayed bulk-in endpoint halt\n"); + while (rc != 0) { + if (rc != -EAGAIN) { + WARN(fsg, "usb_ep_set_halt -> %d\n", rc); + rc = 0; + break; + } + + /* Wait for a short time and then try again */ + if (msleep_interruptible(100) != 0) + return -EINTR; + rc = usb_ep_set_halt(fsg->bulk_in); + } + return rc; +} + +static int pad_with_zeros(struct fsg_dev *fsg) +{ + struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; + u32 nkeep = bh->inreq->length; + u32 nsend; + int rc; + + bh->state = BUF_STATE_EMPTY; // For the first iteration + fsg->usb_amount_left = nkeep + fsg->residue; + while (fsg->usb_amount_left > 0) { + + /* Wait for the next buffer to be free */ + while (bh->state != BUF_STATE_EMPTY) { + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + + nsend = min(fsg->usb_amount_left, (u32) mod_data.buflen); + memset(bh->buf + nkeep, 0, nsend - nkeep); + bh->inreq->length = nsend; + bh->inreq->zero = 0; + start_transfer(fsg, fsg->bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state); + bh = fsg->next_buffhd_to_fill = bh->next; + fsg->usb_amount_left -= nsend; + nkeep = 0; + } + return 0; +} + +static int throw_away_data(struct fsg_dev *fsg) +{ + struct fsg_buffhd *bh; + u32 amount; + int rc; + + while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || + fsg->usb_amount_left > 0) { + + /* Throw away the data in a filled buffer */ + if (bh->state == BUF_STATE_FULL) { + bh->state = BUF_STATE_EMPTY; + fsg->next_buffhd_to_drain = bh->next; + + /* A short packet or an error ends everything */ + if (bh->outreq->actual != bh->outreq->length || + bh->outreq->status != 0) { + raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); + return -EINTR; + } + continue; + } + + /* Try to submit another request if we need one */ + bh = fsg->next_buffhd_to_fill; + if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { + amount = min(fsg->usb_amount_left, + (u32) mod_data.buflen); + + /* amount is always divisible by 512, hence by + * the bulk-out maxpacket size */ + bh->outreq->length = bh->bulk_out_intended_length = + amount; + start_transfer(fsg, fsg->bulk_out, bh->outreq, + &bh->outreq_busy, &bh->state); + fsg->next_buffhd_to_fill = bh->next; + fsg->usb_amount_left -= amount; + continue; + } + + /* Otherwise wait for something to happen */ + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + return 0; +} + + +static int finish_reply(struct fsg_dev *fsg) +{ + struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; + int rc = 0; + + switch (fsg->data_dir) { + case DATA_DIR_NONE: + break; // Nothing to send + + /* If we don't know whether the host wants to read or write, + * this must be CB or CBI with an unknown command. We mustn't + * try to send or receive any data. So stall both bulk pipes + * if we can and wait for a reset. */ + case DATA_DIR_UNKNOWN: + if (mod_data.can_stall) { + fsg_set_halt(fsg, fsg->bulk_out); + rc = halt_bulk_in_endpoint(fsg); + } + break; + + /* All but the last buffer of data must have already been sent */ + case DATA_DIR_TO_HOST: + if (fsg->data_size == 0) + ; // Nothing to send + + /* If there's no residue, simply send the last buffer */ + else if (fsg->residue == 0) { + bh->inreq->zero = 0; + start_transfer(fsg, fsg->bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state); + fsg->next_buffhd_to_fill = bh->next; + } + + /* There is a residue. For CB and CBI, simply mark the end + * of the data with a short packet. However, if we are + * allowed to stall, there was no data at all (residue == + * data_size), and the command failed (invalid LUN or + * sense data is set), then halt the bulk-in endpoint + * instead. */ + else if (!transport_is_bbb()) { + if (mod_data.can_stall && + fsg->residue == fsg->data_size && + (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { + bh->state = BUF_STATE_EMPTY; + rc = halt_bulk_in_endpoint(fsg); + } else { + bh->inreq->zero = 1; + start_transfer(fsg, fsg->bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state); + fsg->next_buffhd_to_fill = bh->next; + } + } + + /* For Bulk-only, if we're allowed to stall then send the + * short packet and halt the bulk-in endpoint. If we can't + * stall, pad out the remaining data with 0's. */ + else { + if (mod_data.can_stall) { + bh->inreq->zero = 1; + start_transfer(fsg, fsg->bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state); + fsg->next_buffhd_to_fill = bh->next; + rc = halt_bulk_in_endpoint(fsg); + } else + rc = pad_with_zeros(fsg); + } + break; + + /* We have processed all we want from the data the host has sent. + * There may still be outstanding bulk-out requests. */ + case DATA_DIR_FROM_HOST: + if (fsg->residue == 0) + ; // Nothing to receive + + /* Did the host stop sending unexpectedly early? */ + else if (fsg->short_packet_received) { + raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); + rc = -EINTR; + } + + /* We haven't processed all the incoming data. Even though + * we may be allowed to stall, doing so would cause a race. + * The controller may already have ACK'ed all the remaining + * bulk-out packets, in which case the host wouldn't see a + * STALL. Not realizing the endpoint was halted, it wouldn't + * clear the halt -- leading to problems later on. */ +#if 0 + else if (mod_data.can_stall) { + fsg_set_halt(fsg, fsg->bulk_out); + raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); + rc = -EINTR; + } +#endif + + /* We can't stall. Read in the excess data and throw it + * all away. */ + else + rc = throw_away_data(fsg); + break; + } + return rc; +} + + +static int send_status(struct fsg_dev *fsg) +{ + struct lun *curlun = fsg->curlun; + struct fsg_buffhd *bh; + int rc; + u8 status = USB_STATUS_PASS; + u32 sd, sdinfo = 0; + + /* Wait for the next buffer to become available */ + bh = fsg->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + + if (curlun) { + sd = curlun->sense_data; + sdinfo = curlun->sense_data_info; + } else if (fsg->bad_lun_okay) + sd = SS_NO_SENSE; + else + sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; + + if (fsg->phase_error) { + DBG(fsg, "sending phase-error status\n"); + status = USB_STATUS_PHASE_ERROR; + sd = SS_INVALID_COMMAND; + } else if (sd != SS_NO_SENSE) { + DBG(fsg, "sending command-failure status\n"); + status = USB_STATUS_FAIL; + VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" + " info x%x\n", + SK(sd), ASC(sd), ASCQ(sd), sdinfo); + } + + if (transport_is_bbb()) { + struct bulk_cs_wrap *csw = (struct bulk_cs_wrap *) bh->buf; + + /* Store and send the Bulk-only CSW */ + csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG); + csw->Tag = fsg->tag; + csw->Residue = cpu_to_le32(fsg->residue); + csw->Status = status; + + bh->inreq->length = USB_BULK_CS_WRAP_LEN; + bh->inreq->zero = 0; + start_transfer(fsg, fsg->bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state); + + } else if (mod_data.transport_type == USB_PR_CB) { + + /* Control-Bulk transport has no status phase! */ + return 0; + + } else { // USB_PR_CBI + struct interrupt_data *buf = (struct interrupt_data *) + bh->buf; + + /* Store and send the Interrupt data. UFI sends the ASC + * and ASCQ bytes. Everything else sends a Type (which + * is always 0) and the status Value. */ + if (mod_data.protocol_type == USB_SC_UFI) { + buf->bType = ASC(sd); + buf->bValue = ASCQ(sd); + } else { + buf->bType = 0; + buf->bValue = status; + } + fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; + + fsg->intr_buffhd = bh; // Point to the right buffhd + fsg->intreq->buf = bh->inreq->buf; + fsg->intreq->dma = bh->inreq->dma; + fsg->intreq->context = bh; + start_transfer(fsg, fsg->intr_in, fsg->intreq, + &fsg->intreq_busy, &bh->state); + } + + fsg->next_buffhd_to_fill = bh->next; + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +/* Check whether the command is properly formed and whether its data size + * and direction agree with the values we already have. */ +static int check_command(struct fsg_dev *fsg, int cmnd_size, + enum data_direction data_dir, unsigned int mask, + int needs_medium, const char *name) +{ + int i; + int lun = fsg->cmnd[1] >> 5; + static const char dirletter[4] = {'u', 'o', 'i', 'n'}; + char hdlen[20]; + struct lun *curlun; + + /* Adjust the expected cmnd_size for protocol encapsulation padding. + * Transparent SCSI doesn't pad. */ + if (protocol_is_scsi()) + ; + + /* There's some disagreement as to whether RBC pads commands or not. + * We'll play it safe and accept either form. */ + else if (mod_data.protocol_type == USB_SC_RBC) { + if (fsg->cmnd_size == 12) + cmnd_size = 12; + + /* All the other protocols pad to 12 bytes */ + } else + cmnd_size = 12; + + hdlen[0] = 0; + if (fsg->data_dir != DATA_DIR_UNKNOWN) + sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], + fsg->data_size); + VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", + name, cmnd_size, dirletter[(int) data_dir], + fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); + + /* We can't reply at all until we know the correct data direction + * and size. */ + if (fsg->data_size_from_cmnd == 0) + data_dir = DATA_DIR_NONE; + if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI + fsg->data_dir = data_dir; + fsg->data_size = fsg->data_size_from_cmnd; + + } else { // Bulk-only + if (fsg->data_size < fsg->data_size_from_cmnd) { + + /* Host data size < Device data size is a phase error. + * Carry out the command, but only transfer as much + * as we are allowed. */ + fsg->data_size_from_cmnd = fsg->data_size; + fsg->phase_error = 1; + } + } + fsg->residue = fsg->usb_amount_left = fsg->data_size; + + /* Conflicting data directions is a phase error */ + if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { + fsg->phase_error = 1; + return -EINVAL; + } + + /* Verify the length of the command itself */ + if (cmnd_size != fsg->cmnd_size) { + + /* Special case workaround: MS-Windows issues REQUEST SENSE + * with cbw->Length == 12 (it should be 6). */ + if (fsg->cmnd[0] == SC_REQUEST_SENSE && fsg->cmnd_size == 12) + cmnd_size = fsg->cmnd_size; + else { + fsg->phase_error = 1; + return -EINVAL; + } + } + + /* Check that the LUN values are oonsistent */ + if (transport_is_bbb()) { + if (fsg->lun != lun) + DBG(fsg, "using LUN %d from CBW, " + "not LUN %d from CDB\n", + fsg->lun, lun); + } else + fsg->lun = lun; // Use LUN from the command + + /* Check the LUN */ + if (fsg->lun >= 0 && fsg->lun < fsg->nluns) { + fsg->curlun = curlun = &fsg->luns[fsg->lun]; + if (fsg->cmnd[0] != SC_REQUEST_SENSE) { + curlun->sense_data = SS_NO_SENSE; + curlun->sense_data_info = 0; + } + } else { + fsg->curlun = curlun = NULL; + fsg->bad_lun_okay = 0; + + /* INQUIRY and REQUEST SENSE commands are explicitly allowed + * to use unsupported LUNs; all others may not. */ + if (fsg->cmnd[0] != SC_INQUIRY && + fsg->cmnd[0] != SC_REQUEST_SENSE) { + DBG(fsg, "unsupported LUN %d\n", fsg->lun); + return -EINVAL; + } + } + + /* If a unit attention condition exists, only INQUIRY and + * REQUEST SENSE commands are allowed; anything else must fail. */ + if (curlun && curlun->unit_attention_data != SS_NO_SENSE && + fsg->cmnd[0] != SC_INQUIRY && + fsg->cmnd[0] != SC_REQUEST_SENSE) { + curlun->sense_data = curlun->unit_attention_data; + curlun->unit_attention_data = SS_NO_SENSE; + return -EINVAL; + } + + /* Check that only command bytes listed in the mask are non-zero */ + fsg->cmnd[1] &= 0x1f; // Mask away the LUN + for (i = 1; i < cmnd_size; ++i) { + if (fsg->cmnd[i] && !(mask & (1 << i))) { + if (curlun) + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + } + + /* If the medium isn't mounted and the command needs to access + * it, return an error. */ + if (curlun && !backing_file_is_open(curlun) && needs_medium) { + curlun->sense_data = SS_MEDIUM_NOT_PRESENT; + return -EINVAL; + } + + return 0; +} + + +static int do_scsi_command(struct fsg_dev *fsg) +{ + struct fsg_buffhd *bh; + int rc; + int reply = -EINVAL; + int i; + static char unknown[16]; + + dump_cdb(fsg); + + /* Wait for the next buffer to become available for data or status */ + bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + fsg->phase_error = 0; + fsg->short_packet_received = 0; + + down_read(&fsg->filesem); // We're using the backing file + switch (fsg->cmnd[0]) { + + case SC_INQUIRY: + fsg->data_size_from_cmnd = fsg->cmnd[4]; + if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, + (1<<4), 0, + "INQUIRY")) == 0) + reply = do_inquiry(fsg, bh); + break; + + case SC_MODE_SELECT_6: + fsg->data_size_from_cmnd = fsg->cmnd[4]; + if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, + (1<<1) | (1<<4), 0, + "MODE SELECT(6)")) == 0) + reply = do_mode_select(fsg, bh); + break; + + case SC_MODE_SELECT_10: + fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]); + if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, + (1<<1) | (3<<7), 0, + "MODE SELECT(10)")) == 0) + reply = do_mode_select(fsg, bh); + break; + + case SC_MODE_SENSE_6: + fsg->data_size_from_cmnd = fsg->cmnd[4]; + if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, + (1<<1) | (1<<2) | (1<<4), 0, + "MODE SENSE(6)")) == 0) + reply = do_mode_sense(fsg, bh); + break; + + case SC_MODE_SENSE_10: + fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]); + if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, + (1<<1) | (1<<2) | (3<<7), 0, + "MODE SENSE(10)")) == 0) + reply = do_mode_sense(fsg, bh); + break; + + case SC_PREVENT_ALLOW_MEDIUM_REMOVAL: + fsg->data_size_from_cmnd = 0; + if ((reply = check_command(fsg, 6, DATA_DIR_NONE, + (1<<4), 0, + "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) + reply = do_prevent_allow(fsg); + break; + + case SC_READ_6: + i = fsg->cmnd[4]; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, + (7<<1) | (1<<4), 1, + "READ(6)")) == 0) + reply = do_read(fsg); + break; + + case SC_READ_10: + fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9; + if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, + (1<<1) | (0xf<<2) | (3<<7), 1, + "READ(10)")) == 0) + reply = do_read(fsg); + break; + + case SC_READ_12: + fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9; + if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST, + (1<<1) | (0xf<<2) | (0xf<<6), 1, + "READ(12)")) == 0) + reply = do_read(fsg); + break; + + case SC_READ_CAPACITY: + fsg->data_size_from_cmnd = 8; + if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, + (0xf<<2) | (1<<8), 1, + "READ CAPACITY")) == 0) + reply = do_read_capacity(fsg, bh); + break; + + case SC_READ_FORMAT_CAPACITIES: + fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]); + if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, + (3<<7), 1, + "READ FORMAT CAPACITIES")) == 0) + reply = do_read_format_capacities(fsg, bh); + break; + + case SC_REQUEST_SENSE: + fsg->data_size_from_cmnd = fsg->cmnd[4]; + if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, + (1<<4), 0, + "REQUEST SENSE")) == 0) + reply = do_request_sense(fsg, bh); + break; + + case SC_START_STOP_UNIT: + fsg->data_size_from_cmnd = 0; + if ((reply = check_command(fsg, 6, DATA_DIR_NONE, + (1<<1) | (1<<4), 0, + "START-STOP UNIT")) == 0) + reply = do_start_stop(fsg); + break; + + case SC_SYNCHRONIZE_CACHE: + fsg->data_size_from_cmnd = 0; + if ((reply = check_command(fsg, 10, DATA_DIR_NONE, + (0xf<<2) | (3<<7), 1, + "SYNCHRONIZE CACHE")) == 0) + reply = do_synchronize_cache(fsg); + break; + + case SC_TEST_UNIT_READY: + fsg->data_size_from_cmnd = 0; + reply = check_command(fsg, 6, DATA_DIR_NONE, + 0, 1, + "TEST UNIT READY"); + break; + + /* Although optional, this command is used by MS-Windows. We + * support a minimal version: BytChk must be 0. */ + case SC_VERIFY: + fsg->data_size_from_cmnd = 0; + if ((reply = check_command(fsg, 10, DATA_DIR_NONE, + (1<<1) | (0xf<<2) | (3<<7), 1, + "VERIFY")) == 0) + reply = do_verify(fsg); + break; + + case SC_WRITE_6: + i = fsg->cmnd[4]; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, + (7<<1) | (1<<4), 1, + "WRITE(6)")) == 0) + reply = do_write(fsg); + break; + + case SC_WRITE_10: + fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9; + if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, + (1<<1) | (0xf<<2) | (3<<7), 1, + "WRITE(10)")) == 0) + reply = do_write(fsg); + break; + + case SC_WRITE_12: + fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9; + if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST, + (1<<1) | (0xf<<2) | (0xf<<6), 1, + "WRITE(12)")) == 0) + reply = do_write(fsg); + break; + + /* Some mandatory commands that we recognize but don't implement. + * They don't mean much in this setting. It's left as an exercise + * for anyone interested to implement RESERVE and RELEASE in terms + * of Posix locks. */ + case SC_FORMAT_UNIT: + case SC_RELEASE: + case SC_RESERVE: + case SC_SEND_DIAGNOSTIC: + // Fall through + + default: + fsg->data_size_from_cmnd = 0; + sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); + if ((reply = check_command(fsg, fsg->cmnd_size, + DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { + fsg->curlun->sense_data = SS_INVALID_COMMAND; + reply = -EINVAL; + } + break; + } + up_read(&fsg->filesem); + + if (reply == -EINTR || signal_pending(current)) + return -EINTR; + + /* Set up the single reply buffer for finish_reply() */ + if (reply == -EINVAL) + reply = 0; // Error reply length + if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { + reply = min((u32) reply, fsg->data_size_from_cmnd); + bh->inreq->length = reply; + bh->state = BUF_STATE_FULL; + fsg->residue -= reply; + } // Otherwise it's already set + + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct usb_request *req = bh->outreq; + struct bulk_cb_wrap *cbw = (struct bulk_cb_wrap *) req->buf; + + /* Was this a real packet? */ + if (req->status) + return -EINVAL; + + /* Is the CBW valid? */ + if (req->actual != USB_BULK_CB_WRAP_LEN || + cbw->Signature != __constant_cpu_to_le32( + USB_BULK_CB_SIG)) { + DBG(fsg, "invalid CBW: len %u sig 0x%x\n", + req->actual, + le32_to_cpu(cbw->Signature)); + + /* The Bulk-only spec says we MUST stall the bulk pipes! + * If we want to avoid stalls, set a flag so that we will + * clear the endpoint halts at the next reset. */ + if (!mod_data.can_stall) + set_bit(CLEAR_BULK_HALTS, &fsg->atomic_bitflags); + fsg_set_halt(fsg, fsg->bulk_out); + halt_bulk_in_endpoint(fsg); + return -EINVAL; + } + + /* Is the CBW meaningful? */ + if (cbw->Lun >= MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG || + cbw->Length < 6 || cbw->Length > MAX_COMMAND_SIZE) { + DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " + "cmdlen %u\n", + cbw->Lun, cbw->Flags, cbw->Length); + + /* We can do anything we want here, so let's stall the + * bulk pipes if we are allowed to. */ + if (mod_data.can_stall) { + fsg_set_halt(fsg, fsg->bulk_out); + halt_bulk_in_endpoint(fsg); + } + return -EINVAL; + } + + /* Save the command for later */ + fsg->cmnd_size = cbw->Length; + memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); + if (cbw->Flags & USB_BULK_IN_FLAG) + fsg->data_dir = DATA_DIR_TO_HOST; + else + fsg->data_dir = DATA_DIR_FROM_HOST; + fsg->data_size = le32_to_cpu(cbw->DataTransferLength); + if (fsg->data_size == 0) + fsg->data_dir = DATA_DIR_NONE; + fsg->lun = cbw->Lun; + fsg->tag = cbw->Tag; + return 0; +} + + +static int get_next_command(struct fsg_dev *fsg) +{ + struct fsg_buffhd *bh; + int rc = 0; + + if (transport_is_bbb()) { + + /* Wait for the next buffer to become available */ + bh = fsg->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + + /* Queue a request to read a Bulk-only CBW */ + set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN); + start_transfer(fsg, fsg->bulk_out, bh->outreq, + &bh->outreq_busy, &bh->state); + + /* We will drain the buffer in software, which means we + * can reuse it for the next filling. No need to advance + * next_buffhd_to_fill. */ + + /* Wait for the CBW to arrive */ + while (bh->state != BUF_STATE_FULL) { + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + rc = received_cbw(fsg, bh); + bh->state = BUF_STATE_EMPTY; + + } else { // USB_PR_CB or USB_PR_CBI + + /* Wait for the next command to arrive */ + while (fsg->cbbuf_cmnd_size == 0) { + if ((rc = sleep_thread(fsg)) != 0) + return rc; + } + + /* Is the previous status interrupt request still busy? + * The host is allowed to skip reading the status, + * so we must cancel it. */ + if (fsg->intreq_busy) + usb_ep_dequeue(fsg->intr_in, fsg->intreq); + + /* Copy the command and mark the buffer empty */ + fsg->data_dir = DATA_DIR_UNKNOWN; + spin_lock_irq(&fsg->lock); + fsg->cmnd_size = fsg->cbbuf_cmnd_size; + memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); + fsg->cbbuf_cmnd_size = 0; + spin_unlock_irq(&fsg->lock); + } + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, + const struct usb_endpoint_descriptor *d) +{ + int rc; + + ep->driver_data = fsg; + rc = usb_ep_enable(ep, d); + if (rc) + ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); + return rc; +} + +static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, + struct usb_request **preq) +{ + *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (*preq) + return 0; + ERROR(fsg, "can't allocate request for %s\n", ep->name); + return -ENOMEM; +} + +/* + * Reset interface setting and re-init endpoint state (toggle etc). + * Call with altsetting < 0 to disable the interface. The only other + * available altsetting is 0, which enables the interface. + */ +static int do_set_interface(struct fsg_dev *fsg, int altsetting) +{ + int rc = 0; + int i; + const struct usb_endpoint_descriptor *d; + + if (fsg->running) + DBG(fsg, "reset interface\n"); + +reset: + /* Deallocate the requests */ + for (i = 0; i < NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &fsg->buffhds[i]; + + if (bh->inreq) { + usb_ep_free_request(fsg->bulk_in, bh->inreq); + bh->inreq = NULL; + } + if (bh->outreq) { + usb_ep_free_request(fsg->bulk_out, bh->outreq); + bh->outreq = NULL; + } + } + if (fsg->intreq) { + usb_ep_free_request(fsg->intr_in, fsg->intreq); + fsg->intreq = NULL; + } + + /* Disable the endpoints */ + if (fsg->bulk_in_enabled) { + usb_ep_disable(fsg->bulk_in); + fsg->bulk_in_enabled = 0; + } + if (fsg->bulk_out_enabled) { + usb_ep_disable(fsg->bulk_out); + fsg->bulk_out_enabled = 0; + } + if (fsg->intr_in_enabled) { + usb_ep_disable(fsg->intr_in); + fsg->intr_in_enabled = 0; + } + + fsg->running = 0; + if (altsetting < 0 || rc != 0) + return rc; + + DBG(fsg, "set interface %d\n", altsetting); + + /* Enable the endpoints */ + d = ep_desc(fsg->gadget, &fs_bulk_in_desc, &hs_bulk_in_desc); + if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) + goto reset; + fsg->bulk_in_enabled = 1; + + d = ep_desc(fsg->gadget, &fs_bulk_out_desc, &hs_bulk_out_desc); + if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) + goto reset; + fsg->bulk_out_enabled = 1; + fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + + if (transport_is_cbi()) { + d = ep_desc(fsg->gadget, &fs_intr_in_desc, &hs_intr_in_desc); + if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) + goto reset; + fsg->intr_in_enabled = 1; + } + + /* Allocate the requests */ + for (i = 0; i < NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &fsg->buffhds[i]; + + if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) + goto reset; + if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) + goto reset; + bh->inreq->buf = bh->outreq->buf = bh->buf; + bh->inreq->dma = bh->outreq->dma = bh->dma; + bh->inreq->context = bh->outreq->context = bh; + bh->inreq->complete = bulk_in_complete; + bh->outreq->complete = bulk_out_complete; + } + if (transport_is_cbi()) { + if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) + goto reset; + fsg->intreq->complete = intr_in_complete; + } + + fsg->running = 1; + for (i = 0; i < fsg->nluns; ++i) + fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; + return rc; +} + + +/* + * Change our operational configuration. This code must agree with the code + * that returns config descriptors, and with interface altsetting code. + * + * It's also responsible for power management interactions. Some + * configurations might not work with our current power sources. + * For now we just assume the gadget is always self-powered. + */ +static int do_set_config(struct fsg_dev *fsg, u8 new_config) +{ + int rc = 0; + + /* Disable the single interface */ + if (fsg->config != 0) { + DBG(fsg, "reset config\n"); + fsg->config = 0; + rc = do_set_interface(fsg, -1); + } + + /* Enable the interface */ + if (new_config != 0) { + fsg->config = new_config; + if ((rc = do_set_interface(fsg, 0)) != 0) + fsg->config = 0; // Reset on errors + else { + char *speed; + + switch (fsg->gadget->speed) { + case USB_SPEED_LOW: speed = "low"; break; + case USB_SPEED_FULL: speed = "full"; break; + case USB_SPEED_HIGH: speed = "high"; break; + default: speed = "?"; break; + } + INFO(fsg, "%s speed config #%d\n", speed, fsg->config); + } + } + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +static void handle_exception(struct fsg_dev *fsg) +{ + siginfo_t info; + int sig; + int i; + int num_active; + struct fsg_buffhd *bh; + enum fsg_state old_state; + u8 new_config; + struct lun *curlun; + unsigned int exception_req_tag; + int rc; + + /* Clear the existing signals. Anything but SIGUSR1 is converted + * into a high-priority EXIT exception. */ + for (;;) { + sig = dequeue_signal_lock(current, &fsg->thread_signal_mask, + &info); + if (!sig) + break; + if (sig != SIGUSR1) { + if (fsg->state < FSG_STATE_EXIT) + DBG(fsg, "Main thread exiting on signal\n"); + raise_exception(fsg, FSG_STATE_EXIT); + } + } + + /* Cancel all the pending transfers */ + if (fsg->intreq_busy) + usb_ep_dequeue(fsg->intr_in, fsg->intreq); + for (i = 0; i < NUM_BUFFERS; ++i) { + bh = &fsg->buffhds[i]; + if (bh->inreq_busy) + usb_ep_dequeue(fsg->bulk_in, bh->inreq); + if (bh->outreq_busy) + usb_ep_dequeue(fsg->bulk_out, bh->outreq); + } + + /* Wait until everything is idle */ + for (;;) { + num_active = fsg->intreq_busy; + for (i = 0; i < NUM_BUFFERS; ++i) { + bh = &fsg->buffhds[i]; + num_active += bh->inreq_busy + bh->outreq_busy; + } + if (num_active == 0) + break; + if (sleep_thread(fsg)) + return; + } + + /* Clear out the controller's fifos */ + if (fsg->bulk_in_enabled) + usb_ep_fifo_flush(fsg->bulk_in); + if (fsg->bulk_out_enabled) + usb_ep_fifo_flush(fsg->bulk_out); + if (fsg->intr_in_enabled) + usb_ep_fifo_flush(fsg->intr_in); + + /* Reset the I/O buffer states and pointers, the SCSI + * state, and the exception. Then invoke the handler. */ + spin_lock_irq(&fsg->lock); + + for (i = 0; i < NUM_BUFFERS; ++i) { + bh = &fsg->buffhds[i]; + bh->state = BUF_STATE_EMPTY; + } + fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = + &fsg->buffhds[0]; + + exception_req_tag = fsg->exception_req_tag; + new_config = fsg->new_config; + old_state = fsg->state; + + if (old_state == FSG_STATE_ABORT_BULK_OUT) + fsg->state = FSG_STATE_STATUS_PHASE; + else { + for (i = 0; i < fsg->nluns; ++i) { + curlun = &fsg->luns[i]; + curlun->prevent_medium_removal = 0; + curlun->sense_data = curlun->unit_attention_data = + SS_NO_SENSE; + curlun->sense_data_info = 0; + } + fsg->state = FSG_STATE_IDLE; + } + spin_unlock_irq(&fsg->lock); + + /* Carry out any extra actions required for the exception */ + switch (old_state) { + default: + break; + + case FSG_STATE_ABORT_BULK_OUT: + send_status(fsg); + spin_lock_irq(&fsg->lock); + if (fsg->state == FSG_STATE_STATUS_PHASE) + fsg->state = FSG_STATE_IDLE; + spin_unlock_irq(&fsg->lock); + break; + + case FSG_STATE_RESET: + /* In case we were forced against our will to halt a + * bulk endpoint, clear the halt now. (The SuperH UDC + * requires this.) */ + if (test_and_clear_bit(CLEAR_BULK_HALTS, + &fsg->atomic_bitflags)) { + usb_ep_clear_halt(fsg->bulk_in); + usb_ep_clear_halt(fsg->bulk_out); + } + + if (transport_is_bbb()) { + if (fsg->ep0_req_tag == exception_req_tag) + ep0_queue(fsg); // Complete the status stage + + } else if (transport_is_cbi()) + send_status(fsg); // Status by interrupt pipe + + /* Technically this should go here, but it would only be + * a waste of time. Ditto for the INTERFACE_CHANGE and + * CONFIG_CHANGE cases. */ + // for (i = 0; i < fsg->nluns; ++i) + // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; + break; + + case FSG_STATE_INTERFACE_CHANGE: + rc = do_set_interface(fsg, 0); + if (fsg->ep0_req_tag != exception_req_tag) + break; + if (rc != 0) // STALL on errors + fsg_set_halt(fsg, fsg->ep0); + else // Complete the status stage + ep0_queue(fsg); + break; + + case FSG_STATE_CONFIG_CHANGE: + rc = do_set_config(fsg, new_config); + if (fsg->ep0_req_tag != exception_req_tag) + break; + if (rc != 0) // STALL on errors + fsg_set_halt(fsg, fsg->ep0); + else // Complete the status stage + ep0_queue(fsg); + break; + + case FSG_STATE_DISCONNECT: + fsync_all(fsg); + do_set_config(fsg, 0); // Unconfigured state + break; + + case FSG_STATE_EXIT: + case FSG_STATE_TERMINATED: + do_set_config(fsg, 0); // Free resources + spin_lock_irq(&fsg->lock); + fsg->state = FSG_STATE_TERMINATED; // Stop the thread + spin_unlock_irq(&fsg->lock); + break; + } +} + + +/*-------------------------------------------------------------------------*/ + +static int fsg_main_thread(void *fsg_) +{ + struct fsg_dev *fsg = (struct fsg_dev *) fsg_; + + fsg->thread_task = current; + + /* Release all our userspace resources */ + daemonize("file-storage-gadget"); + + /* Allow the thread to be killed by a signal, but set the signal mask + * to block everything but INT, TERM, KILL, and USR1. */ + siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) | + sigmask(SIGTERM) | sigmask(SIGKILL) | + sigmask(SIGUSR1)); + sigprocmask(SIG_SETMASK, &fsg->thread_signal_mask, NULL); + + /* Arrange for userspace references to be interpreted as kernel + * pointers. That way we can pass a kernel pointer to a routine + * that expects a __user pointer and it will work okay. */ + set_fs(get_ds()); + + /* Wait for the gadget registration to finish up */ + wait_for_completion(&fsg->thread_notifier); + + /* The main loop */ + while (fsg->state != FSG_STATE_TERMINATED) { + if (exception_in_progress(fsg) || signal_pending(current)) { + handle_exception(fsg); + continue; + } + + if (!fsg->running) { + sleep_thread(fsg); + continue; + } + + if (get_next_command(fsg)) + continue; + + spin_lock_irq(&fsg->lock); + if (!exception_in_progress(fsg)) + fsg->state = FSG_STATE_DATA_PHASE; + spin_unlock_irq(&fsg->lock); + + if (do_scsi_command(fsg) || finish_reply(fsg)) + continue; + + spin_lock_irq(&fsg->lock); + if (!exception_in_progress(fsg)) + fsg->state = FSG_STATE_STATUS_PHASE; + spin_unlock_irq(&fsg->lock); + + if (send_status(fsg)) + continue; + + spin_lock_irq(&fsg->lock); + if (!exception_in_progress(fsg)) + fsg->state = FSG_STATE_IDLE; + spin_unlock_irq(&fsg->lock); + } + + fsg->thread_task = NULL; + flush_signals(current); + + /* In case we are exiting because of a signal, unregister the + * gadget driver and close the backing file. */ + if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) { + usb_gadget_unregister_driver(&fsg_driver); + close_all_backing_files(fsg); + } + + /* Let the unbind and cleanup routines know the thread has exited */ + complete_and_exit(&fsg->thread_notifier, 0); +} + + +/*-------------------------------------------------------------------------*/ + +/* If the next two routines are called while the gadget is registered, + * the caller must own fsg->filesem for writing. */ + +static int open_backing_file(struct lun *curlun, const char *filename) +{ + int ro; + struct file *filp = NULL; + int rc = -EINVAL; + struct inode *inode = NULL; + loff_t size; + loff_t num_sectors; + + /* R/W if we can, R/O if we must */ + ro = curlun->ro; + if (!ro) { + filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0); + if (-EROFS == PTR_ERR(filp)) + ro = 1; + } + if (ro) + filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0); + if (IS_ERR(filp)) { + LINFO(curlun, "unable to open backing file: %s\n", filename); + return PTR_ERR(filp); + } + + if (!(filp->f_mode & FMODE_WRITE)) + ro = 1; + + if (filp->f_dentry) + inode = filp->f_dentry->d_inode; + if (inode && S_ISBLK(inode->i_mode)) { + if (bdev_read_only(inode->i_bdev)) + ro = 1; + } else if (!inode || !S_ISREG(inode->i_mode)) { + LINFO(curlun, "invalid file type: %s\n", filename); + goto out; + } + + /* If we can't read the file, it's no good. + * If we can't write the file, use it read-only. */ + if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) { + LINFO(curlun, "file not readable: %s\n", filename); + goto out; + } + if (!(filp->f_op->write || filp->f_op->aio_write)) + ro = 1; + + size = i_size_read(inode->i_mapping->host); + if (size < 0) { + LINFO(curlun, "unable to find file size: %s\n", filename); + rc = (int) size; + goto out; + } + num_sectors = size >> 9; // File size in 512-byte sectors + if (num_sectors == 0) { + LINFO(curlun, "file too small: %s\n", filename); + rc = -ETOOSMALL; + goto out; + } + + get_file(filp); + curlun->ro = ro; + curlun->filp = filp; + curlun->file_length = size; + curlun->num_sectors = num_sectors; + LDBG(curlun, "open backing file: %s\n", filename); + rc = 0; + +out: + filp_close(filp, current->files); + return rc; +} + + +static void close_backing_file(struct lun *curlun) +{ + if (curlun->filp) { + LDBG(curlun, "close backing file\n"); + fput(curlun->filp); + curlun->filp = NULL; + } +} + +static void close_all_backing_files(struct fsg_dev *fsg) +{ + int i; + + for (i = 0; i < fsg->nluns; ++i) + close_backing_file(&fsg->luns[i]); +} + + +static ssize_t show_ro(struct device *dev, char *buf) +{ + struct lun *curlun = dev_to_lun(dev); + + return sprintf(buf, "%d\n", curlun->ro); +} + +static ssize_t show_file(struct device *dev, char *buf) +{ + struct lun *curlun = dev_to_lun(dev); + struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + char *p; + ssize_t rc; + + down_read(&fsg->filesem); + if (backing_file_is_open(curlun)) { // Get the complete pathname + p = d_path(curlun->filp->f_dentry, curlun->filp->f_vfsmnt, + buf, PAGE_SIZE - 1); + if (IS_ERR(p)) + rc = PTR_ERR(p); + else { + rc = strlen(p); + memmove(buf, p, rc); + buf[rc] = '\n'; // Add a newline + buf[++rc] = 0; + } + } else { // No file, return 0 bytes + *buf = 0; + rc = 0; + } + up_read(&fsg->filesem); + return rc; +} + + +static ssize_t store_ro(struct device *dev, const char *buf, size_t count) +{ + ssize_t rc = count; + struct lun *curlun = dev_to_lun(dev); + struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + int i; + + if (sscanf(buf, "%d", &i) != 1) + return -EINVAL; + + /* Allow the write-enable status to change only while the backing file + * is closed. */ + down_read(&fsg->filesem); + if (backing_file_is_open(curlun)) { + LDBG(curlun, "read-only status change prevented\n"); + rc = -EBUSY; + } else { + curlun->ro = !!i; + LDBG(curlun, "read-only status set to %d\n", curlun->ro); + } + up_read(&fsg->filesem); + return rc; +} + +static ssize_t store_file(struct device *dev, const char *buf, size_t count) +{ + struct lun *curlun = dev_to_lun(dev); + struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + int rc = 0; + + if (curlun->prevent_medium_removal && backing_file_is_open(curlun)) { + LDBG(curlun, "eject attempt prevented\n"); + return -EBUSY; // "Door is locked" + } + + /* Remove a trailing newline */ + if (count > 0 && buf[count-1] == '\n') + ((char *) buf)[count-1] = 0; // Ugh! + + /* Eject current medium */ + down_write(&fsg->filesem); + if (backing_file_is_open(curlun)) { + close_backing_file(curlun); + curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; + } + + /* Load new medium */ + if (count > 0 && buf[0]) { + rc = open_backing_file(curlun, buf); + if (rc == 0) + curlun->unit_attention_data = + SS_NOT_READY_TO_READY_TRANSITION; + } + up_write(&fsg->filesem); + return (rc < 0 ? rc : count); +} + + +/* The write permissions and store_xxx pointers are set in fsg_bind() */ +static DEVICE_ATTR(ro, 0444, show_ro, NULL); +static DEVICE_ATTR(file, 0444, show_file, NULL); + + +/*-------------------------------------------------------------------------*/ + +static void lun_release(struct device *dev) +{ + struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + + complete(&fsg->lun_released); +} + +static void fsg_unbind(struct usb_gadget *gadget) +{ + struct fsg_dev *fsg = get_gadget_data(gadget); + int i; + struct lun *curlun; + struct usb_request *req = fsg->ep0req; + + DBG(fsg, "unbind\n"); + clear_bit(REGISTERED, &fsg->atomic_bitflags); + + /* Unregister the sysfs attribute files and the LUNs */ + init_completion(&fsg->lun_released); + for (i = 0; i < fsg->nluns; ++i) { + curlun = &fsg->luns[i]; + if (curlun->registered) { + device_remove_file(&curlun->dev, &dev_attr_ro); + device_remove_file(&curlun->dev, &dev_attr_file); + device_unregister(&curlun->dev); + wait_for_completion(&fsg->lun_released); + curlun->registered = 0; + } + } + + /* If the thread isn't already dead, tell it to exit now */ + if (fsg->state != FSG_STATE_TERMINATED) { + raise_exception(fsg, FSG_STATE_EXIT); + wait_for_completion(&fsg->thread_notifier); + + /* The cleanup routine waits for this completion also */ + complete(&fsg->thread_notifier); + } + + /* Free the data buffers */ + for (i = 0; i < NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &fsg->buffhds[i]; + + if (bh->buf) + usb_ep_free_buffer(fsg->bulk_in, bh->buf, bh->dma, + mod_data.buflen); + } + + /* Free the request and buffer for endpoint 0 */ + if (req) { + if (req->buf) + usb_ep_free_buffer(fsg->ep0, req->buf, + req->dma, EP0_BUFSIZE); + usb_ep_free_request(fsg->ep0, req); + } + + set_gadget_data(gadget, NULL); +} + + +static int __init check_parameters(struct fsg_dev *fsg) +{ + int prot; + + /* Store the default values */ + mod_data.transport_type = USB_PR_BULK; + mod_data.transport_name = "Bulk-only"; + mod_data.protocol_type = USB_SC_SCSI; + mod_data.protocol_name = "Transparent SCSI"; + + if (gadget_is_sh(fsg->gadget)) + mod_data.can_stall = 0; + + if (mod_data.release == 0xffff) { // Parameter wasn't set + if (gadget_is_net2280(fsg->gadget)) + mod_data.release = 0x0301; + else if (gadget_is_dummy(fsg->gadget)) + mod_data.release = 0x0302; + else if (gadget_is_pxa(fsg->gadget)) + mod_data.release = 0x0303; + else if (gadget_is_sh(fsg->gadget)) + mod_data.release = 0x0304; + + /* The sa1100 controller is not supported */ + + else if (gadget_is_goku(fsg->gadget)) + mod_data.release = 0x0306; + else if (gadget_is_mq11xx(fsg->gadget)) + mod_data.release = 0x0307; + else if (gadget_is_omap(fsg->gadget)) + mod_data.release = 0x0308; + else if (gadget_is_lh7a40x(fsg->gadget)) + mod_data.release = 0x0309; + else if (gadget_is_n9604(fsg->gadget)) + mod_data.release = 0x0310; + else if (gadget_is_pxa27x(fsg->gadget)) + mod_data.release = 0x0311; + else if (gadget_is_s3c2410(gadget)) + mod_data.release = 0x0312; + else if (gadget_is_at91(fsg->gadget)) + mod_data.release = 0x0313; + else { + WARN(fsg, "controller '%s' not recognized\n", + fsg->gadget->name); + mod_data.release = 0x0399; + } + } + + prot = simple_strtol(mod_data.protocol_parm, NULL, 0); + +#ifdef CONFIG_USB_FILE_STORAGE_TEST + if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { + ; // Use default setting + } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { + mod_data.transport_type = USB_PR_CB; + mod_data.transport_name = "Control-Bulk"; + } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { + mod_data.transport_type = USB_PR_CBI; + mod_data.transport_name = "Control-Bulk-Interrupt"; + } else { + ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); + return -EINVAL; + } + + if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || + prot == USB_SC_SCSI) { + ; // Use default setting + } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || + prot == USB_SC_RBC) { + mod_data.protocol_type = USB_SC_RBC; + mod_data.protocol_name = "RBC"; + } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || + strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || + prot == USB_SC_8020) { + mod_data.protocol_type = USB_SC_8020; + mod_data.protocol_name = "8020i (ATAPI)"; + } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || + prot == USB_SC_QIC) { + mod_data.protocol_type = USB_SC_QIC; + mod_data.protocol_name = "QIC-157"; + } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || + prot == USB_SC_UFI) { + mod_data.protocol_type = USB_SC_UFI; + mod_data.protocol_name = "UFI"; + } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || + prot == USB_SC_8070) { + mod_data.protocol_type = USB_SC_8070; + mod_data.protocol_name = "8070i"; + } else { + ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); + return -EINVAL; + } + + mod_data.buflen &= PAGE_CACHE_MASK; + if (mod_data.buflen <= 0) { + ERROR(fsg, "invalid buflen\n"); + return -ETOOSMALL; + } +#endif /* CONFIG_USB_FILE_STORAGE_TEST */ + + return 0; +} + + +static int __init fsg_bind(struct usb_gadget *gadget) +{ + struct fsg_dev *fsg = the_fsg; + int rc; + int i; + struct lun *curlun; + struct usb_ep *ep; + struct usb_request *req; + char *pathbuf, *p; + + fsg->gadget = gadget; + set_gadget_data(gadget, fsg); + fsg->ep0 = gadget->ep0; + fsg->ep0->driver_data = fsg; + + if ((rc = check_parameters(fsg)) != 0) + goto out; + + if (mod_data.removable) { // Enable the store_xxx attributes + dev_attr_ro.attr.mode = dev_attr_file.attr.mode = 0644; + dev_attr_ro.store = store_ro; + dev_attr_file.store = store_file; + } + + /* Find out how many LUNs there should be */ + i = mod_data.nluns; + if (i == 0) + i = max(mod_data.num_filenames, 1); + if (i > MAX_LUNS) { + ERROR(fsg, "invalid number of LUNs: %d\n", i); + rc = -EINVAL; + goto out; + } + + /* Create the LUNs, open their backing files, and register the + * LUN devices in sysfs. */ + fsg->luns = kmalloc(i * sizeof(struct lun), GFP_KERNEL); + if (!fsg->luns) { + rc = -ENOMEM; + goto out; + } + memset(fsg->luns, 0, i * sizeof(struct lun)); + fsg->nluns = i; + + for (i = 0; i < fsg->nluns; ++i) { + curlun = &fsg->luns[i]; + curlun->ro = ro[i]; + curlun->dev.parent = &gadget->dev; + curlun->dev.driver = &fsg_driver.driver; + dev_set_drvdata(&curlun->dev, fsg); + snprintf(curlun->dev.bus_id, BUS_ID_SIZE, + "%s-lun%d", gadget->dev.bus_id, i); + + if ((rc = device_register(&curlun->dev)) != 0) + INFO(fsg, "failed to register LUN%d: %d\n", i, rc); + else { + curlun->registered = 1; + curlun->dev.release = lun_release; + device_create_file(&curlun->dev, &dev_attr_ro); + device_create_file(&curlun->dev, &dev_attr_file); + } + + if (file[i] && *file[i]) { + if ((rc = open_backing_file(curlun, file[i])) != 0) + goto out; + } else if (!mod_data.removable) { + ERROR(fsg, "no file given for LUN%d\n", i); + rc = -EINVAL; + goto out; + } + } + + /* Find all the endpoints we will use */ + usb_ep_autoconfig_reset(gadget); + ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg; // claim the endpoint + fsg->bulk_in = ep; + + ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg; // claim the endpoint + fsg->bulk_out = ep; + + if (transport_is_cbi()) { + ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg; // claim the endpoint + fsg->intr_in = ep; + } + + /* Fix up the descriptors */ + device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; + device_desc.idVendor = cpu_to_le16(mod_data.vendor); + device_desc.idProduct = cpu_to_le16(mod_data.product); + device_desc.bcdDevice = cpu_to_le16(mod_data.release); + + i = (transport_is_cbi() ? 3 : 2); // Number of endpoints + intf_desc.bNumEndpoints = i; + intf_desc.bInterfaceSubClass = mod_data.protocol_type; + intf_desc.bInterfaceProtocol = mod_data.transport_type; + fs_function[i + FS_FUNCTION_PRE_EP_ENTRIES] = NULL; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL; + + /* Assume ep0 uses the same maxpacket value for both speeds */ + dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; + + /* Assume that all endpoint addresses are the same for both speeds */ + hs_bulk_in_desc.bEndpointAddress = fs_bulk_in_desc.bEndpointAddress; + hs_bulk_out_desc.bEndpointAddress = fs_bulk_out_desc.bEndpointAddress; + hs_intr_in_desc.bEndpointAddress = fs_intr_in_desc.bEndpointAddress; +#endif + + if (gadget->is_otg) { + otg_desc.bmAttributes |= USB_OTG_HNP, + config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + rc = -ENOMEM; + + /* Allocate the request and buffer for endpoint 0 */ + fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); + if (!req) + goto out; + req->buf = usb_ep_alloc_buffer(fsg->ep0, EP0_BUFSIZE, + &req->dma, GFP_KERNEL); + if (!req->buf) + goto out; + req->complete = ep0_complete; + + /* Allocate the data buffers */ + for (i = 0; i < NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &fsg->buffhds[i]; + + bh->buf = usb_ep_alloc_buffer(fsg->bulk_in, mod_data.buflen, + &bh->dma, GFP_KERNEL); + if (!bh->buf) + goto out; + bh->next = bh + 1; + } + fsg->buffhds[NUM_BUFFERS - 1].next = &fsg->buffhds[0]; + + /* This should reflect the actual gadget power source */ + usb_gadget_set_selfpowered(gadget); + + snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", + system_utsname.sysname, system_utsname.release, + gadget->name); + + /* On a real device, serial[] would be loaded from permanent + * storage. We just encode it from the driver version string. */ + for (i = 0; i < sizeof(serial) - 2; i += 2) { + unsigned char c = DRIVER_VERSION[i / 2]; + + if (!c) + break; + sprintf(&serial[i], "%02X", c); + } + + if ((rc = kernel_thread(fsg_main_thread, fsg, (CLONE_VM | CLONE_FS | + CLONE_FILES))) < 0) + goto out; + fsg->thread_pid = rc; + + INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); + INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); + + pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); + for (i = 0; i < fsg->nluns; ++i) { + curlun = &fsg->luns[i]; + if (backing_file_is_open(curlun)) { + p = NULL; + if (pathbuf) { + p = d_path(curlun->filp->f_dentry, + curlun->filp->f_vfsmnt, + pathbuf, PATH_MAX); + if (IS_ERR(p)) + p = NULL; + } + LINFO(curlun, "ro=%d, file: %s\n", + curlun->ro, (p ? p : "(error)")); + } + } + kfree(pathbuf); + + DBG(fsg, "transport=%s (x%02x)\n", + mod_data.transport_name, mod_data.transport_type); + DBG(fsg, "protocol=%s (x%02x)\n", + mod_data.protocol_name, mod_data.protocol_type); + DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", + mod_data.vendor, mod_data.product, mod_data.release); + DBG(fsg, "removable=%d, stall=%d, buflen=%u\n", + mod_data.removable, mod_data.can_stall, + mod_data.buflen); + DBG(fsg, "I/O thread pid: %d\n", fsg->thread_pid); + return 0; + +autoconf_fail: + ERROR(fsg, "unable to autoconfigure all endpoints\n"); + rc = -ENOTSUPP; + +out: + fsg->state = FSG_STATE_TERMINATED; // The thread is dead + fsg_unbind(gadget); + close_all_backing_files(fsg); + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +static void fsg_suspend(struct usb_gadget *gadget) +{ + struct fsg_dev *fsg = get_gadget_data(gadget); + + DBG(fsg, "suspend\n"); + set_bit(SUSPENDED, &fsg->atomic_bitflags); +} + +static void fsg_resume(struct usb_gadget *gadget) +{ + struct fsg_dev *fsg = get_gadget_data(gadget); + + DBG(fsg, "resume\n"); + clear_bit(SUSPENDED, &fsg->atomic_bitflags); +} + + +/*-------------------------------------------------------------------------*/ + +static struct usb_gadget_driver fsg_driver = { +#ifdef CONFIG_USB_GADGET_DUALSPEED + .speed = USB_SPEED_HIGH, +#else + .speed = USB_SPEED_FULL, +#endif + .function = (char *) longname, + .bind = fsg_bind, + .unbind = fsg_unbind, + .disconnect = fsg_disconnect, + .setup = fsg_setup, + .suspend = fsg_suspend, + .resume = fsg_resume, + + .driver = { + .name = (char *) shortname, + // .release = ... + // .suspend = ... + // .resume = ... + }, +}; + + +static int __init fsg_alloc(void) +{ + struct fsg_dev *fsg; + + fsg = kmalloc(sizeof *fsg, GFP_KERNEL); + if (!fsg) + return -ENOMEM; + memset(fsg, 0, sizeof *fsg); + spin_lock_init(&fsg->lock); + init_rwsem(&fsg->filesem); + init_waitqueue_head(&fsg->thread_wqh); + init_completion(&fsg->thread_notifier); + + the_fsg = fsg; + return 0; +} + + +static void fsg_free(struct fsg_dev *fsg) +{ + kfree(fsg->luns); + kfree(fsg); +} + + +static int __init fsg_init(void) +{ + int rc; + struct fsg_dev *fsg; + + if ((rc = fsg_alloc()) != 0) + return rc; + fsg = the_fsg; + if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) { + fsg_free(fsg); + return rc; + } + set_bit(REGISTERED, &fsg->atomic_bitflags); + + /* Tell the thread to start working */ + complete(&fsg->thread_notifier); + return 0; +} +module_init(fsg_init); + + +static void __exit fsg_cleanup(void) +{ + struct fsg_dev *fsg = the_fsg; + + /* Unregister the driver iff the thread hasn't already done so */ + if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) + usb_gadget_unregister_driver(&fsg_driver); + + /* Wait for the thread to finish up */ + wait_for_completion(&fsg->thread_notifier); + + close_all_backing_files(fsg); + fsg_free(fsg); +} +module_exit(fsg_cleanup); diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h new file mode 100644 index 0000000..ea2eb52 --- /dev/null +++ b/drivers/usb/gadget/gadget_chips.h @@ -0,0 +1,92 @@ +/* + * USB device controllers have lots of quirks. Use these macros in + * gadget drivers or other code that needs to deal with them, and which + * autoconfigures instead of using early binding to the hardware. + * + * This could eventually work like the ARM mach_is_*() stuff, driven by + * some config file that gets updated as new hardware is supported. + * + * NOTE: some of these controller drivers may not be available yet. + */ +#ifdef CONFIG_USB_GADGET_NET2280 +#define gadget_is_net2280(g) !strcmp("net2280", (g)->name) +#else +#define gadget_is_net2280(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_DUMMY_HCD +#define gadget_is_dummy(g) !strcmp("dummy_udc", (g)->name) +#else +#define gadget_is_dummy(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_PXA2XX +#define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name) +#else +#define gadget_is_pxa(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_GOKU +#define gadget_is_goku(g) !strcmp("goku_udc", (g)->name) +#else +#define gadget_is_goku(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_SUPERH +#define gadget_is_sh(g) !strcmp("sh_udc", (g)->name) +#else +#define gadget_is_sh(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_SA1100 +#define gadget_is_sa1100(g) !strcmp("sa1100_udc", (g)->name) +#else +#define gadget_is_sa1100(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_LH7A40X +#define gadget_is_lh7a40x(g) !strcmp("lh7a40x_udc", (g)->name) +#else +#define gadget_is_lh7a40x(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_MQ11XX +#define gadget_is_mq11xx(g) !strcmp("mq11xx_udc", (g)->name) +#else +#define gadget_is_mq11xx(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_OMAP +#define gadget_is_omap(g) !strcmp("omap_udc", (g)->name) +#else +#define gadget_is_omap(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_N9604 +#define gadget_is_n9604(g) !strcmp("n9604_udc", (g)->name) +#else +#define gadget_is_n9604(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_PXA27X +#define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name) +#else +#define gadget_is_pxa27x(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_S3C2410 +#define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name) +#else +#define gadget_is_s3c2410(g) 0 +#endif + +#ifdef CONFIG_USB_GADGET_AT91 +#define gadget_is_at91(g) !strcmp("at91_udc", (g)->name) +#else +#define gadget_is_at91(g) 0 +#endif + +// CONFIG_USB_GADGET_SX2 +// CONFIG_USB_GADGET_AU1X00 +// ... + diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c new file mode 100644 index 0000000..005db7c --- /dev/null +++ b/drivers/usb/gadget/goku_udc.c @@ -0,0 +1,1984 @@ +/* + * Toshiba TC86C001 ("Goku-S") USB Device Controller driver + * + * Copyright (C) 2000-2002 Lineo + * by Stuart Lynne, Tom Rushworth, and Bruce Balden + * Copyright (C) 2002 Toshiba Corporation + * Copyright (C) 2003 MontaVista Software (source@mvista.com) + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * This device has ep0 and three semi-configurable bulk/interrupt endpoints. + * + * - Endpoint numbering is fixed: ep{1,2,3}-bulk + * - Gadget drivers can choose ep maxpacket (8/16/32/64) + * - Gadget drivers can choose direction (IN, OUT) + * - DMA works with ep1 (OUT transfers) and ep2 (IN transfers). + */ + +#undef DEBUG +// #define VERBOSE /* extra debug messages (success too) */ +// #define USB_TRACE /* packet-level success messages */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/device.h> +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> + + +#include "goku_udc.h" + +#define DRIVER_DESC "TC86C001 USB Device Controller" +#define DRIVER_VERSION "30-Oct 2003" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +static const char driver_name [] = "goku_udc"; +static const char driver_desc [] = DRIVER_DESC; + +MODULE_AUTHOR("source@mvista.com"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + + +/* + * IN dma behaves ok under testing, though the IN-dma abort paths don't + * seem to behave quite as expected. Used by default. + * + * OUT dma documents design problems handling the common "short packet" + * transfer termination policy; it couldn't enabled by default, even + * if the OUT-dma abort problems had a resolution. + */ +static unsigned use_dma = 1; + +#if 0 +//#include <linux/moduleparam.h> +/* "modprobe goku_udc use_dma=1" etc + * 0 to disable dma + * 1 to use IN dma only (normal operation) + * 2 to use IN and OUT dma + */ +module_param(use_dma, uint, S_IRUGO); +#endif + +/*-------------------------------------------------------------------------*/ + +static void nuke(struct goku_ep *, int status); + +static inline void +command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum) +{ + writel(COMMAND_EP(epnum) | command, ®s->Command); + udelay(300); +} + +static int +goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct goku_udc *dev; + struct goku_ep *ep; + u32 mode; + u16 max; + unsigned long flags; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep || !desc || ep->desc + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dev = ep->dev; + if (ep == &dev->ep[0]) + return -EINVAL; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + if (ep->num != (desc->bEndpointAddress & 0x0f)) + return -EINVAL; + + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + break; + default: + return -EINVAL; + } + + if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK) + != EPxSTATUS_EP_INVALID) + return -EBUSY; + + /* enabling the no-toggle interrupt mode would need an api hook */ + mode = 0; + max = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)); + switch (max) { + case 64: mode++; + case 32: mode++; + case 16: mode++; + case 8: mode <<= 3; + break; + default: + return -EINVAL; + } + mode |= 2 << 1; /* bulk, or intr-with-toggle */ + + /* ep1/ep2 dma direction is chosen early; it works in the other + * direction, with pio. be cautious with out-dma. + */ + ep->is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0; + if (ep->is_in) { + mode |= 1; + ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT); + } else { + ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT); + if (ep->dma) + DBG(dev, "%s out-dma hides short packets\n", + ep->ep.name); + } + + spin_lock_irqsave(&ep->dev->lock, flags); + + /* ep1 and ep2 can do double buffering and/or dma */ + if (ep->num < 3) { + struct goku_udc_regs __iomem *regs = ep->dev->regs; + u32 tmp; + + /* double buffer except (for now) with pio in */ + tmp = ((ep->dma || !ep->is_in) + ? 0x10 /* double buffered */ + : 0x11 /* single buffer */ + ) << ep->num; + tmp |= readl(®s->EPxSingle); + writel(tmp, ®s->EPxSingle); + + tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num; + tmp |= readl(®s->EPxBCS); + writel(tmp, ®s->EPxBCS); + } + writel(mode, ep->reg_mode); + command(ep->dev->regs, COMMAND_RESET, ep->num); + ep->ep.maxpacket = max; + ep->stopped = 0; + ep->desc = desc; + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name, + ep->is_in ? "IN" : "OUT", + ep->dma ? "dma" : "pio", + max); + + return 0; +} + +static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep) +{ + struct goku_udc *dev = ep->dev; + + if (regs) { + command(regs, COMMAND_INVALID, ep->num); + if (ep->num) { + if (ep->num == UDC_MSTWR_ENDPOINT) + dev->int_enable &= ~(INT_MSTWREND + |INT_MSTWRTMOUT); + else if (ep->num == UDC_MSTRD_ENDPOINT) + dev->int_enable &= ~INT_MSTRDEND; + dev->int_enable &= ~INT_EPxDATASET (ep->num); + } else + dev->int_enable &= ~INT_EP0; + writel(dev->int_enable, ®s->int_enable); + readl(®s->int_enable); + if (ep->num < 3) { + struct goku_udc_regs __iomem *r = ep->dev->regs; + u32 tmp; + + tmp = readl(&r->EPxSingle); + tmp &= ~(0x11 << ep->num); + writel(tmp, &r->EPxSingle); + + tmp = readl(&r->EPxBCS); + tmp &= ~(0x11 << ep->num); + writel(tmp, &r->EPxBCS); + } + /* reset dma in case we're still using it */ + if (ep->dma) { + u32 master; + + master = readl(®s->dma_master) & MST_RW_BITS; + if (ep->num == UDC_MSTWR_ENDPOINT) { + master &= ~MST_W_BITS; + master |= MST_WR_RESET; + } else { + master &= ~MST_R_BITS; + master |= MST_RD_RESET; + } + writel(master, ®s->dma_master); + } + } + + ep->ep.maxpacket = MAX_FIFO_SIZE; + ep->desc = NULL; + ep->stopped = 1; + ep->irqs = 0; + ep->dma = 0; +} + +static int goku_ep_disable(struct usb_ep *_ep) +{ + struct goku_ep *ep; + struct goku_udc *dev; + unsigned long flags; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep || !ep->desc) + return -ENODEV; + dev = ep->dev; + if (dev->ep0state == EP0_SUSPEND) + return -EBUSY; + + VDBG(dev, "disable %s\n", _ep->name); + + spin_lock_irqsave(&dev->lock, flags); + nuke(ep, -ESHUTDOWN); + ep_reset(dev->regs, ep); + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +goku_alloc_request(struct usb_ep *_ep, int gfp_flags) +{ + struct goku_request *req; + + if (!_ep) + return NULL; + req = kmalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + memset(req, 0, sizeof *req); + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +static void +goku_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct goku_request *req; + + if (!_ep || !_req) + return; + + req = container_of(_req, struct goku_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +/*-------------------------------------------------------------------------*/ + +#undef USE_KMALLOC + +/* many common platforms have dma-coherent caches, which means that it's + * safe to use kmalloc() memory for all i/o buffers without using any + * cache flushing calls. (unless you're trying to share cache lines + * between dma and non-dma activities, which is a slow idea in any case.) + * + * other platforms need more care, with 2.6 having a moderately general + * solution except for the common "buffer is smaller than a page" case. + */ +#if defined(CONFIG_X86) +#define USE_KMALLOC + +#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO) +#define USE_KMALLOC + +#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) +#define USE_KMALLOC + +#endif + +/* allocating buffers this way eliminates dma mapping overhead, which + * on some platforms will mean eliminating a per-io buffer copy. with + * some kinds of system caches, further tweaks may still be needed. + */ +static void * +goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes, + dma_addr_t *dma, int gfp_flags) +{ + void *retval; + struct goku_ep *ep; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep) + return NULL; + *dma = DMA_ADDR_INVALID; + +#if defined(USE_KMALLOC) + retval = kmalloc(bytes, gfp_flags); + if (retval) + *dma = virt_to_phys(retval); +#else + if (ep->dma) { + /* the main problem with this call is that it wastes memory + * on typical 1/N page allocations: it allocates 1-N pages. + */ +#warning Using dma_alloc_coherent even with buffers smaller than a page. + retval = dma_alloc_coherent(&ep->dev->pdev->dev, + bytes, dma, gfp_flags); + } else + retval = kmalloc(bytes, gfp_flags); +#endif + return retval; +} + +static void +goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes) +{ + /* free memory into the right allocator */ +#ifndef USE_KMALLOC + if (dma != DMA_ADDR_INVALID) { + struct goku_ep *ep; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep) + return; + dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma); + } else +#endif + kfree (buf); +} + +/*-------------------------------------------------------------------------*/ + +static void +done(struct goku_ep *ep, struct goku_request *req, int status) +{ + struct goku_udc *dev; + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + if (req->mapped) { + pci_unmap_single(dev->pdev, req->req.dma, req->req.length, + ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } + +#ifndef USB_TRACE + if (status && status != -ESHUTDOWN) +#endif + VDBG(dev, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&dev->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&dev->lock); + ep->stopped = stopped; +} + +/*-------------------------------------------------------------------------*/ + +static inline int +write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max) +{ + unsigned length, count; + + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + count = length; + while (likely(count--)) + writel(*buf++, fifo); + return length; +} + +// return: 0 = still running, 1 = completed, negative = errno +static int write_fifo(struct goku_ep *ep, struct goku_request *req) +{ + struct goku_udc *dev = ep->dev; + u32 tmp; + u8 *buf; + unsigned count; + int is_last; + + tmp = readl(&dev->regs->DataSet); + buf = req->req.buf + req->req.actual; + prefetch(buf); + + dev = ep->dev; + if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN)) + return -EL2HLT; + + /* NOTE: just single-buffered PIO-IN for now. */ + if (unlikely((tmp & DATASET_A(ep->num)) != 0)) + return 0; + + /* clear our "packet available" irq */ + if (ep->num != 0) + writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status); + + count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket); + + /* last packet often short (sometimes a zlp, especially on ep0) */ + if (unlikely(count != ep->ep.maxpacket)) { + writel(~(1<<ep->num), &dev->regs->EOP); + if (ep->num == 0) { + dev->ep[0].stopped = 1; + dev->ep0state = EP0_STATUS; + } + is_last = 1; + } else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + } +#if 0 /* printk seemed to trash is_last...*/ +//#ifdef USB_TRACE + VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n", + ep->ep.name, count, is_last ? "/last" : "", + req->req.length - req->req.actual, req); +#endif + + /* requests complete when all IN data is in the FIFO, + * or sometimes later, if a zlp was needed. + */ + if (is_last) { + done(ep, req, 0); + return 1; + } + + return 0; +} + +static int read_fifo(struct goku_ep *ep, struct goku_request *req) +{ + struct goku_udc_regs __iomem *regs; + u32 size, set; + u8 *buf; + unsigned bufferspace, is_short, dbuff; + + regs = ep->dev->regs; +top: + buf = req->req.buf + req->req.actual; + prefetchw(buf); + + if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT)) + return -EL2HLT; + + dbuff = (ep->num == 1 || ep->num == 2); + do { + /* ack dataset irq matching the status we'll handle */ + if (ep->num != 0) + writel(~INT_EPxDATASET(ep->num), ®s->int_status); + + set = readl(®s->DataSet) & DATASET_AB(ep->num); + size = readl(®s->EPxSizeLA[ep->num]); + bufferspace = req->req.length - req->req.actual; + + /* usually do nothing without an OUT packet */ + if (likely(ep->num != 0 || bufferspace != 0)) { + if (unlikely(set == 0)) + break; + /* use ep1/ep2 double-buffering for OUT */ + if (!(size & PACKET_ACTIVE)) + size = readl(®s->EPxSizeLB[ep->num]); + if (!(size & PACKET_ACTIVE)) // "can't happen" + break; + size &= DATASIZE; /* EPxSizeH == 0 */ + + /* ep0out no-out-data case for set_config, etc */ + } else + size = 0; + + /* read all bytes from this packet */ + req->req.actual += size; + is_short = (size < ep->ep.maxpacket); +#ifdef USB_TRACE + VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n", + ep->ep.name, size, is_short ? "/S" : "", + req, req->req.actual, req->req.length); +#endif + while (likely(size-- != 0)) { + u8 byte = (u8) readl(ep->reg_fifo); + + if (unlikely(bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data in this packet. + */ + if (req->req.status != -EOVERFLOW) + DBG(ep->dev, "%s overflow %u\n", + ep->ep.name, size); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + + /* completion */ + if (unlikely(is_short || req->req.actual == req->req.length)) { + if (unlikely(ep->num == 0)) { + /* non-control endpoints now usable? */ + if (ep->dev->req_config) + writel(ep->dev->configured + ? USBSTATE_CONFIGURED + : 0, + ®s->UsbState); + /* ep0out status stage */ + writel(~(1<<0), ®s->EOP); + ep->stopped = 1; + ep->dev->ep0state = EP0_STATUS; + } + done(ep, req, 0); + + /* empty the second buffer asap */ + if (dbuff && !list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct goku_request, queue); + goto top; + } + return 1; + } + } while (dbuff); + return 0; +} + +static inline void +pio_irq_enable(struct goku_udc *dev, + struct goku_udc_regs __iomem *regs, int epnum) +{ + dev->int_enable |= INT_EPxDATASET (epnum); + writel(dev->int_enable, ®s->int_enable); + /* write may still be posted */ +} + +static inline void +pio_irq_disable(struct goku_udc *dev, + struct goku_udc_regs __iomem *regs, int epnum) +{ + dev->int_enable &= ~INT_EPxDATASET (epnum); + writel(dev->int_enable, ®s->int_enable); + /* write may still be posted */ +} + +static inline void +pio_advance(struct goku_ep *ep) +{ + struct goku_request *req; + + if (unlikely(list_empty (&ep->queue))) + return; + req = list_entry(ep->queue.next, struct goku_request, queue); + (ep->is_in ? write_fifo : read_fifo)(ep, req); +} + + +/*-------------------------------------------------------------------------*/ + +// return: 0 = q running, 1 = q stopped, negative = errno +static int start_dma(struct goku_ep *ep, struct goku_request *req) +{ + struct goku_udc_regs __iomem *regs = ep->dev->regs; + u32 master; + u32 start = req->req.dma; + u32 end = start + req->req.length - 1; + + master = readl(®s->dma_master) & MST_RW_BITS; + + /* re-init the bits affecting IN dma; careful with zlps */ + if (likely(ep->is_in)) { + if (unlikely(master & MST_RD_ENA)) { + DBG (ep->dev, "start, IN active dma %03x!!\n", + master); +// return -EL2HLT; + } + writel(end, ®s->in_dma_end); + writel(start, ®s->in_dma_start); + + master &= ~MST_R_BITS; + if (unlikely(req->req.length == 0)) + master = MST_RD_ENA | MST_RD_EOPB; + else if ((req->req.length % ep->ep.maxpacket) != 0 + || req->req.zero) + master = MST_RD_ENA | MST_EOPB_ENA; + else + master = MST_RD_ENA | MST_EOPB_DIS; + + ep->dev->int_enable |= INT_MSTRDEND; + + /* Goku DMA-OUT merges short packets, which plays poorly with + * protocols where short packets mark the transfer boundaries. + * The chip supports a nonstandard policy with INT_MSTWRTMOUT, + * ending transfers after 3 SOFs; we don't turn it on. + */ + } else { + if (unlikely(master & MST_WR_ENA)) { + DBG (ep->dev, "start, OUT active dma %03x!!\n", + master); +// return -EL2HLT; + } + writel(end, ®s->out_dma_end); + writel(start, ®s->out_dma_start); + + master &= ~MST_W_BITS; + master |= MST_WR_ENA | MST_TIMEOUT_DIS; + + ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT; + } + + writel(master, ®s->dma_master); + writel(ep->dev->int_enable, ®s->int_enable); + return 0; +} + +static void dma_advance(struct goku_udc *dev, struct goku_ep *ep) +{ + struct goku_request *req; + struct goku_udc_regs __iomem *regs = ep->dev->regs; + u32 master; + + master = readl(®s->dma_master); + + if (unlikely(list_empty(&ep->queue))) { +stop: + if (ep->is_in) + dev->int_enable &= ~INT_MSTRDEND; + else + dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT); + writel(dev->int_enable, ®s->int_enable); + return; + } + req = list_entry(ep->queue.next, struct goku_request, queue); + + /* normal hw dma completion (not abort) */ + if (likely(ep->is_in)) { + if (unlikely(master & MST_RD_ENA)) + return; + req->req.actual = readl(®s->in_dma_current); + } else { + if (unlikely(master & MST_WR_ENA)) + return; + + /* hardware merges short packets, and also hides packet + * overruns. a partial packet MAY be in the fifo here. + */ + req->req.actual = readl(®s->out_dma_current); + } + req->req.actual -= req->req.dma; + req->req.actual++; + +#ifdef USB_TRACE + VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n", + ep->ep.name, ep->is_in ? "IN" : "OUT", + req->req.actual, req->req.length, req); +#endif + done(ep, req, 0); + if (list_empty(&ep->queue)) + goto stop; + req = list_entry(ep->queue.next, struct goku_request, queue); + (void) start_dma(ep, req); +} + +static void abort_dma(struct goku_ep *ep, int status) +{ + struct goku_udc_regs __iomem *regs = ep->dev->regs; + struct goku_request *req; + u32 curr, master; + + /* NAK future host requests, hoping the implicit delay lets the + * dma engine finish reading (or writing) its latest packet and + * empty the dma buffer (up to 16 bytes). + * + * This avoids needing to clean up a partial packet in the fifo; + * we can't do that for IN without side effects to HALT and TOGGLE. + */ + command(regs, COMMAND_FIFO_DISABLE, ep->num); + req = list_entry(ep->queue.next, struct goku_request, queue); + master = readl(®s->dma_master) & MST_RW_BITS; + + /* FIXME using these resets isn't usably documented. this may + * not work unless it's followed by disabling the endpoint. + * + * FIXME the OUT reset path doesn't even behave consistently. + */ + if (ep->is_in) { + if (unlikely((readl(®s->dma_master) & MST_RD_ENA) == 0)) + goto finished; + curr = readl(®s->in_dma_current); + + writel(curr, ®s->in_dma_end); + writel(curr, ®s->in_dma_start); + + master &= ~MST_R_BITS; + master |= MST_RD_RESET; + writel(master, ®s->dma_master); + + if (readl(®s->dma_master) & MST_RD_ENA) + DBG(ep->dev, "IN dma active after reset!\n"); + + } else { + if (unlikely((readl(®s->dma_master) & MST_WR_ENA) == 0)) + goto finished; + curr = readl(®s->out_dma_current); + + writel(curr, ®s->out_dma_end); + writel(curr, ®s->out_dma_start); + + master &= ~MST_W_BITS; + master |= MST_WR_RESET; + writel(master, ®s->dma_master); + + if (readl(®s->dma_master) & MST_WR_ENA) + DBG(ep->dev, "OUT dma active after reset!\n"); + } + req->req.actual = (curr - req->req.dma) + 1; + req->req.status = status; + + VDBG(ep->dev, "%s %s %s %d/%d\n", __FUNCTION__, ep->ep.name, + ep->is_in ? "IN" : "OUT", + req->req.actual, req->req.length); + + command(regs, COMMAND_FIFO_ENABLE, ep->num); + + return; + +finished: + /* dma already completed; no abort needed */ + command(regs, COMMAND_FIFO_ENABLE, ep->num); + req->req.actual = req->req.length; + req->req.status = 0; +} + +/*-------------------------------------------------------------------------*/ + +static int +goku_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +{ + struct goku_request *req; + struct goku_ep *ep; + struct goku_udc *dev; + unsigned long flags; + int status; + + /* always require a cpu-view buffer so pio works */ + req = container_of(_req, struct goku_request, req); + if (unlikely(!_req || !_req->complete + || !_req->buf || !list_empty(&req->queue))) + return -EINVAL; + ep = container_of(_ep, struct goku_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->num != 0))) + return -EINVAL; + dev = ep->dev; + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + + /* can't touch registers when suspended */ + if (dev->ep0state == EP0_SUSPEND) + return -EBUSY; + + /* set up dma mapping in case the caller didn't */ + if (ep->dma && _req->dma == DMA_ADDR_INVALID) { + _req->dma = pci_map_single(dev->pdev, _req->buf, _req->length, + ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + req->mapped = 1; + } + +#ifdef USB_TRACE + VDBG(dev, "%s queue req %p, len %u buf %p\n", + _ep->name, _req, _req->length, _req->buf); +#endif + + spin_lock_irqsave(&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* for ep0 IN without premature status, zlp is required and + * writing EOP starts the status stage (OUT). + */ + if (unlikely(ep->num == 0 && ep->is_in)) + _req->zero = 1; + + /* kickstart this i/o queue? */ + status = 0; + if (list_empty(&ep->queue) && likely(!ep->stopped)) { + /* dma: done after dma completion IRQ (or error) + * pio: done after last fifo operation + */ + if (ep->dma) + status = start_dma(ep, req); + else + status = (ep->is_in ? write_fifo : read_fifo)(ep, req); + + if (unlikely(status != 0)) { + if (status > 0) + status = 0; + req = NULL; + } + + } /* else pio or dma irq handler advances the queue. */ + + if (likely(req != 0)) + list_add_tail(&req->queue, &ep->queue); + + if (likely(!list_empty(&ep->queue)) + && likely(ep->num != 0) + && !ep->dma + && !(dev->int_enable & INT_EPxDATASET (ep->num))) + pio_irq_enable(dev, dev->regs, ep->num); + + spin_unlock_irqrestore(&dev->lock, flags); + + /* pci writes may still be posted */ + return status; +} + +/* dequeue ALL requests */ +static void nuke(struct goku_ep *ep, int status) +{ + struct goku_request *req; + + ep->stopped = 1; + if (list_empty(&ep->queue)) + return; + if (ep->dma) + abort_dma(ep, status); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct goku_request, queue); + done(ep, req, status); + } +} + +/* dequeue JUST ONE request */ +static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct goku_request *req; + struct goku_ep *ep; + struct goku_udc *dev; + unsigned long flags; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep || !_req || (!ep->desc && ep->num != 0)) + return -EINVAL; + dev = ep->dev; + if (!dev->driver) + return -ESHUTDOWN; + + /* we can't touch (dma) registers when suspended */ + if (dev->ep0state == EP0_SUSPEND) + return -EBUSY; + + VDBG(dev, "%s %s %s %s %p\n", __FUNCTION__, _ep->name, + ep->is_in ? "IN" : "OUT", + ep->dma ? "dma" : "pio", + _req); + + spin_lock_irqsave(&dev->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore (&dev->lock, flags); + return -EINVAL; + } + + if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) { + abort_dma(ep, -ECONNRESET); + done(ep, req, -ECONNRESET); + dma_advance(dev, ep); + } else if (!list_empty(&req->queue)) + done(ep, req, -ECONNRESET); + else + req = NULL; + spin_unlock_irqrestore(&dev->lock, flags); + + return req ? 0 : -EOPNOTSUPP; +} + +/*-------------------------------------------------------------------------*/ + +static void goku_clear_halt(struct goku_ep *ep) +{ + // assert (ep->num !=0) + VDBG(ep->dev, "%s clear halt\n", ep->ep.name); + command(ep->dev->regs, COMMAND_SETDATA0, ep->num); + command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num); + if (ep->stopped) { + ep->stopped = 0; + if (ep->dma) { + struct goku_request *req; + + if (list_empty(&ep->queue)) + return; + req = list_entry(ep->queue.next, struct goku_request, + queue); + (void) start_dma(ep, req); + } else + pio_advance(ep); + } +} + +static int goku_set_halt(struct usb_ep *_ep, int value) +{ + struct goku_ep *ep; + unsigned long flags; + int retval = 0; + + if (!_ep) + return -ENODEV; + ep = container_of (_ep, struct goku_ep, ep); + + if (ep->num == 0) { + if (value) { + ep->dev->ep0state = EP0_STALL; + ep->dev->ep[0].stopped = 1; + } else + return -EINVAL; + + /* don't change EPxSTATUS_EP_INVALID to READY */ + } else if (!ep->desc) { + DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name); + return -EINVAL; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + if (!list_empty(&ep->queue)) + retval = -EAGAIN; + else if (ep->is_in && value + /* data in (either) packet buffer? */ + && (readl(&ep->dev->regs->DataSet) + & DATASET_AB(ep->num))) + retval = -EAGAIN; + else if (!value) + goku_clear_halt(ep); + else { + ep->stopped = 1; + VDBG(ep->dev, "%s set halt\n", ep->ep.name); + command(ep->dev->regs, COMMAND_STALL, ep->num); + readl(ep->reg_status); + } + spin_unlock_irqrestore(&ep->dev->lock, flags); + return retval; +} + +static int goku_fifo_status(struct usb_ep *_ep) +{ + struct goku_ep *ep; + struct goku_udc_regs __iomem *regs; + u32 size; + + if (!_ep) + return -ENODEV; + ep = container_of(_ep, struct goku_ep, ep); + + /* size is only reported sanely for OUT */ + if (ep->is_in) + return -EOPNOTSUPP; + + /* ignores 16-byte dma buffer; SizeH == 0 */ + regs = ep->dev->regs; + size = readl(®s->EPxSizeLA[ep->num]) & DATASIZE; + size += readl(®s->EPxSizeLB[ep->num]) & DATASIZE; + VDBG(ep->dev, "%s %s %u\n", __FUNCTION__, ep->ep.name, size); + return size; +} + +static void goku_fifo_flush(struct usb_ep *_ep) +{ + struct goku_ep *ep; + struct goku_udc_regs __iomem *regs; + u32 size; + + if (!_ep) + return; + ep = container_of(_ep, struct goku_ep, ep); + VDBG(ep->dev, "%s %s\n", __FUNCTION__, ep->ep.name); + + /* don't change EPxSTATUS_EP_INVALID to READY */ + if (!ep->desc && ep->num != 0) { + DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name); + return; + } + + regs = ep->dev->regs; + size = readl(®s->EPxSizeLA[ep->num]); + size &= DATASIZE; + + /* Non-desirable behavior: FIFO_CLEAR also clears the + * endpoint halt feature. For OUT, we _could_ just read + * the bytes out (PIO, if !ep->dma); for in, no choice. + */ + if (size) + command(regs, COMMAND_FIFO_CLEAR, ep->num); +} + +static struct usb_ep_ops goku_ep_ops = { + .enable = goku_ep_enable, + .disable = goku_ep_disable, + + .alloc_request = goku_alloc_request, + .free_request = goku_free_request, + + .alloc_buffer = goku_alloc_buffer, + .free_buffer = goku_free_buffer, + + .queue = goku_queue, + .dequeue = goku_dequeue, + + .set_halt = goku_set_halt, + .fifo_status = goku_fifo_status, + .fifo_flush = goku_fifo_flush, +}; + +/*-------------------------------------------------------------------------*/ + +static int goku_get_frame(struct usb_gadget *_gadget) +{ + return -EOPNOTSUPP; +} + +static const struct usb_gadget_ops goku_ops = { + .get_frame = goku_get_frame, + // no remote wakeup + // not selfpowered +}; + +/*-------------------------------------------------------------------------*/ + +static inline char *dmastr(void) +{ + if (use_dma == 0) + return "(dma disabled)"; + else if (use_dma == 2) + return "(dma IN and OUT)"; + else + return "(dma IN)"; +} + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static const char proc_node_name [] = "driver/udc"; + +#define FOURBITS "%s%s%s%s" +#define EIGHTBITS FOURBITS FOURBITS + +static void +dump_intmask(const char *label, u32 mask, char **next, unsigned *size) +{ + int t; + + /* int_status is the same format ... */ + t = scnprintf(*next, *size, + "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n", + label, mask, + (mask & INT_PWRDETECT) ? " power" : "", + (mask & INT_SYSERROR) ? " sys" : "", + (mask & INT_MSTRDEND) ? " in-dma" : "", + (mask & INT_MSTWRTMOUT) ? " wrtmo" : "", + + (mask & INT_MSTWREND) ? " out-dma" : "", + (mask & INT_MSTWRSET) ? " wrset" : "", + (mask & INT_ERR) ? " err" : "", + (mask & INT_SOF) ? " sof" : "", + + (mask & INT_EP3NAK) ? " ep3nak" : "", + (mask & INT_EP2NAK) ? " ep2nak" : "", + (mask & INT_EP1NAK) ? " ep1nak" : "", + (mask & INT_EP3DATASET) ? " ep3" : "", + + (mask & INT_EP2DATASET) ? " ep2" : "", + (mask & INT_EP1DATASET) ? " ep1" : "", + (mask & INT_STATUSNAK) ? " ep0snak" : "", + (mask & INT_STATUS) ? " ep0status" : "", + + (mask & INT_SETUP) ? " setup" : "", + (mask & INT_ENDPOINT0) ? " ep0" : "", + (mask & INT_USBRESET) ? " reset" : "", + (mask & INT_SUSPEND) ? " suspend" : ""); + *size -= t; + *next += t; +} + + +static int +udc_proc_read(char *buffer, char **start, off_t off, int count, + int *eof, void *_dev) +{ + char *buf = buffer; + struct goku_udc *dev = _dev; + struct goku_udc_regs __iomem *regs = dev->regs; + char *next = buf; + unsigned size = count; + unsigned long flags; + int i, t, is_usb_connected; + u32 tmp; + + if (off != 0) + return 0; + + local_irq_save(flags); + + /* basic device status */ + tmp = readl(®s->power_detect); + is_usb_connected = tmp & PW_DETECT; + t = scnprintf(next, size, + "%s - %s\n" + "%s version: %s %s\n" + "Gadget driver: %s\n" + "Host %s, %s\n" + "\n", + pci_name(dev->pdev), driver_desc, + driver_name, DRIVER_VERSION, dmastr(), + dev->driver ? dev->driver->driver.name : "(none)", + is_usb_connected + ? ((tmp & PW_PULLUP) ? "full speed" : "powered") + : "disconnected", + ({char *tmp; + switch(dev->ep0state){ + case EP0_DISCONNECT: tmp = "ep0_disconnect"; break; + case EP0_IDLE: tmp = "ep0_idle"; break; + case EP0_IN: tmp = "ep0_in"; break; + case EP0_OUT: tmp = "ep0_out"; break; + case EP0_STATUS: tmp = "ep0_status"; break; + case EP0_STALL: tmp = "ep0_stall"; break; + case EP0_SUSPEND: tmp = "ep0_suspend"; break; + default: tmp = "ep0_?"; break; + } tmp; }) + ); + size -= t; + next += t; + + dump_intmask("int_status", readl(®s->int_status), &next, &size); + dump_intmask("int_enable", readl(®s->int_enable), &next, &size); + + if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0) + goto done; + + /* registers for (active) device and ep0 */ + t = scnprintf(next, size, "\nirqs %lu\ndataset %02x " + "single.bcs %02x.%02x state %x addr %u\n", + dev->irqs, readl(®s->DataSet), + readl(®s->EPxSingle), readl(®s->EPxBCS), + readl(®s->UsbState), + readl(®s->address)); + size -= t; + next += t; + + tmp = readl(®s->dma_master); + t = scnprintf(next, size, + "dma %03X =" EIGHTBITS "%s %s\n", tmp, + (tmp & MST_EOPB_DIS) ? " eopb-" : "", + (tmp & MST_EOPB_ENA) ? " eopb+" : "", + (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "", + (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "", + + (tmp & MST_RD_EOPB) ? " eopb" : "", + (tmp & MST_RD_RESET) ? " in_reset" : "", + (tmp & MST_WR_RESET) ? " out_reset" : "", + (tmp & MST_RD_ENA) ? " IN" : "", + + (tmp & MST_WR_ENA) ? " OUT" : "", + (tmp & MST_CONNECTION) + ? "ep1in/ep2out" + : "ep1out/ep2in"); + size -= t; + next += t; + + /* dump endpoint queues */ + for (i = 0; i < 4; i++) { + struct goku_ep *ep = &dev->ep [i]; + struct goku_request *req; + int t; + + if (i && !ep->desc) + continue; + + tmp = readl(ep->reg_status); + t = scnprintf(next, size, + "%s %s max %u %s, irqs %lu, " + "status %02x (%s) " FOURBITS "\n", + ep->ep.name, + ep->is_in ? "in" : "out", + ep->ep.maxpacket, + ep->dma ? "dma" : "pio", + ep->irqs, + tmp, ({ char *s; + switch (tmp & EPxSTATUS_EP_MASK) { + case EPxSTATUS_EP_READY: + s = "ready"; break; + case EPxSTATUS_EP_DATAIN: + s = "packet"; break; + case EPxSTATUS_EP_FULL: + s = "full"; break; + case EPxSTATUS_EP_TX_ERR: // host will retry + s = "tx_err"; break; + case EPxSTATUS_EP_RX_ERR: + s = "rx_err"; break; + case EPxSTATUS_EP_BUSY: /* ep0 only */ + s = "busy"; break; + case EPxSTATUS_EP_STALL: + s = "stall"; break; + case EPxSTATUS_EP_INVALID: // these "can't happen" + s = "invalid"; break; + default: + s = "?"; break; + }; s; }), + (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", + (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", + (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", + (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "" + ); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (list_empty(&ep->queue)) { + t = scnprintf(next, size, "\t(nothing queued)\n"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + continue; + } + list_for_each_entry(req, &ep->queue, queue) { + if (ep->dma && req->queue.prev == &ep->queue) { + if (i == UDC_MSTRD_ENDPOINT) + tmp = readl(®s->in_dma_current); + else + tmp = readl(®s->out_dma_current); + tmp -= req->req.dma; + tmp++; + } else + tmp = req->req.actual; + + t = scnprintf(next, size, + "\treq %p len %u/%u buf %p\n", + &req->req, tmp, req->req.length, + req->req.buf); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + } + } + +done: + local_irq_restore(flags); + *eof = 1; + return count - size; +} + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/*-------------------------------------------------------------------------*/ + +static void udc_reinit (struct goku_udc *dev) +{ + static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" }; + + unsigned i; + + INIT_LIST_HEAD (&dev->gadget.ep_list); + dev->gadget.ep0 = &dev->ep [0].ep; + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->ep0state = EP0_DISCONNECT; + dev->irqs = 0; + + for (i = 0; i < 4; i++) { + struct goku_ep *ep = &dev->ep[i]; + + ep->num = i; + ep->ep.name = names[i]; + ep->reg_fifo = &dev->regs->ep_fifo [i]; + ep->reg_status = &dev->regs->ep_status [i]; + ep->reg_mode = &dev->regs->ep_mode[i]; + + ep->ep.ops = &goku_ep_ops; + list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + ep->dev = dev; + INIT_LIST_HEAD (&ep->queue); + + ep_reset(NULL, ep); + } + + dev->ep[0].reg_mode = NULL; + dev->ep[0].ep.maxpacket = MAX_EP0_SIZE; + list_del_init (&dev->ep[0].ep.ep_list); +} + +static void udc_reset(struct goku_udc *dev) +{ + struct goku_udc_regs __iomem *regs = dev->regs; + + writel(0, ®s->power_detect); + writel(0, ®s->int_enable); + readl(®s->int_enable); + dev->int_enable = 0; + + /* deassert reset, leave USB D+ at hi-Z (no pullup) + * don't let INT_PWRDETECT sequence begin + */ + udelay(250); + writel(PW_RESETB, ®s->power_detect); + readl(®s->int_enable); +} + +static void ep0_start(struct goku_udc *dev) +{ + struct goku_udc_regs __iomem *regs = dev->regs; + unsigned i; + + VDBG(dev, "%s\n", __FUNCTION__); + + udc_reset(dev); + udc_reinit (dev); + //writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, ®s->dma_master); + + /* hw handles set_address, set_feature, get_status; maybe more */ + writel( G_REQMODE_SET_INTF | G_REQMODE_GET_INTF + | G_REQMODE_SET_CONF | G_REQMODE_GET_CONF + | G_REQMODE_GET_DESC + | G_REQMODE_CLEAR_FEAT + , ®s->reqmode); + + for (i = 0; i < 4; i++) + dev->ep[i].irqs = 0; + + /* can't modify descriptors after writing UsbReady */ + for (i = 0; i < DESC_LEN; i++) + writel(0, ®s->descriptors[i]); + writel(0, ®s->UsbReady); + + /* expect ep0 requests when the host drops reset */ + writel(PW_RESETB | PW_PULLUP, ®s->power_detect); + dev->int_enable = INT_DEVWIDE | INT_EP0; + writel(dev->int_enable, &dev->regs->int_enable); + readl(®s->int_enable); + dev->gadget.speed = USB_SPEED_FULL; + dev->ep0state = EP0_IDLE; +} + +static void udc_enable(struct goku_udc *dev) +{ + /* start enumeration now, or after power detect irq */ + if (readl(&dev->regs->power_detect) & PW_DETECT) + ep0_start(dev); + else { + DBG(dev, "%s\n", __FUNCTION__); + dev->int_enable = INT_PWRDETECT; + writel(dev->int_enable, &dev->regs->int_enable); + } +} + +/*-------------------------------------------------------------------------*/ + +/* keeping it simple: + * - one bus driver, initted first; + * - one function driver, initted second + */ + +static struct goku_udc *the_controller; + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct goku_udc *dev = the_controller; + int retval; + + if (!driver + || driver->speed != USB_SPEED_FULL + || !driver->bind + || !driver->unbind + || !driver->disconnect + || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + /* hook up the driver */ + driver->driver.bus = NULL; + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + retval = driver->bind(&dev->gadget); + if (retval) { + DBG(dev, "bind to driver %s --> error %d\n", + driver->driver.name, retval); + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + return retval; + } + + /* then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + udc_enable(dev); + + DBG(dev, "registered gadget driver '%s'\n", driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +static void +stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver) +{ + unsigned i; + + DBG (dev, "%s\n", __FUNCTION__); + + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + /* disconnect gadget driver after quiesceing hw and the driver */ + udc_reset (dev); + for (i = 0; i < 4; i++) + nuke(&dev->ep [i], -ESHUTDOWN); + if (driver) { + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + + if (dev->driver) + udc_enable(dev); +} + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct goku_udc *dev = the_controller; + unsigned long flags; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + + spin_lock_irqsave(&dev->lock, flags); + dev->driver = NULL; + stop_activity(dev, driver); + spin_unlock_irqrestore(&dev->lock, flags); + + driver->unbind(&dev->gadget); + + DBG(dev, "unregistered driver '%s'\n", driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + + +/*-------------------------------------------------------------------------*/ + +static void ep0_setup(struct goku_udc *dev) +{ + struct goku_udc_regs __iomem *regs = dev->regs; + struct usb_ctrlrequest ctrl; + int tmp; + + /* read SETUP packet and enter DATA stage */ + ctrl.bRequestType = readl(®s->bRequestType); + ctrl.bRequest = readl(®s->bRequest); + ctrl.wValue = (readl(®s->wValueH) << 8) | readl(®s->wValueL); + ctrl.wIndex = (readl(®s->wIndexH) << 8) | readl(®s->wIndexL); + ctrl.wLength = (readl(®s->wLengthH) << 8) | readl(®s->wLengthL); + writel(0, ®s->SetupRecv); + + nuke(&dev->ep[0], 0); + dev->ep[0].stopped = 0; + if (likely(ctrl.bRequestType & USB_DIR_IN)) { + dev->ep[0].is_in = 1; + dev->ep0state = EP0_IN; + /* detect early status stages */ + writel(ICONTROL_STATUSNAK, &dev->regs->IntControl); + } else { + dev->ep[0].is_in = 0; + dev->ep0state = EP0_OUT; + + /* NOTE: CLEAR_FEATURE is done in software so that we can + * synchronize transfer restarts after bulk IN stalls. data + * won't even enter the fifo until the halt is cleared. + */ + switch (ctrl.bRequest) { + case USB_REQ_CLEAR_FEATURE: + switch (ctrl.bRequestType) { + case USB_RECIP_ENDPOINT: + tmp = ctrl.wIndex & 0x0f; + /* active endpoint */ + if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0)) + goto stall; + if (ctrl.wIndex & USB_DIR_IN) { + if (!dev->ep[tmp].is_in) + goto stall; + } else { + if (dev->ep[tmp].is_in) + goto stall; + } + if (ctrl.wValue != USB_ENDPOINT_HALT) + goto stall; + if (tmp) + goku_clear_halt(&dev->ep[tmp]); +succeed: + /* start ep0out status stage */ + writel(~(1<<0), ®s->EOP); + dev->ep[0].stopped = 1; + dev->ep0state = EP0_STATUS; + return; + case USB_RECIP_DEVICE: + /* device remote wakeup: always clear */ + if (ctrl.wValue != 1) + goto stall; + VDBG(dev, "clear dev remote wakeup\n"); + goto succeed; + case USB_RECIP_INTERFACE: + goto stall; + default: /* pass to gadget driver */ + break; + } + break; + default: + break; + } + } + +#ifdef USB_TRACE + VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", + ctrl.bRequestType, ctrl.bRequest, + ctrl.wValue, ctrl.wIndex, ctrl.wLength); +#endif + + /* hw wants to know when we're configured (or not) */ + dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION + && ctrl.bRequestType == USB_RECIP_DEVICE); + if (unlikely(dev->req_config)) + dev->configured = (ctrl.wValue != 0); + + /* delegate everything to the gadget driver. + * it may respond after this irq handler returns. + */ + spin_unlock (&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &ctrl); + spin_lock (&dev->lock); + if (unlikely(tmp < 0)) { +stall: +#ifdef USB_TRACE + VDBG(dev, "req %02x.%02x protocol STALL; err %d\n", + ctrl.bRequestType, ctrl.bRequest, tmp); +#endif + command(regs, COMMAND_STALL, 0); + dev->ep[0].stopped = 1; + dev->ep0state = EP0_STALL; + } + + /* expect at least one data or status stage irq */ +} + +#define ACK(irqbit) { \ + stat &= ~irqbit; \ + writel(~irqbit, ®s->int_status); \ + handled = 1; \ + } + +static irqreturn_t goku_irq(int irq, void *_dev, struct pt_regs *r) +{ + struct goku_udc *dev = _dev; + struct goku_udc_regs __iomem *regs = dev->regs; + struct goku_ep *ep; + u32 stat, handled = 0; + unsigned i, rescans = 5; + + spin_lock(&dev->lock); + +rescan: + stat = readl(®s->int_status) & dev->int_enable; + if (!stat) + goto done; + dev->irqs++; + + /* device-wide irqs */ + if (unlikely(stat & INT_DEVWIDE)) { + if (stat & INT_SYSERROR) { + ERROR(dev, "system error\n"); + stop_activity(dev, dev->driver); + stat = 0; + handled = 1; + // FIXME have a neater way to prevent re-enumeration + dev->driver = NULL; + goto done; + } + if (stat & INT_PWRDETECT) { + writel(~stat, ®s->int_status); + if (readl(&dev->regs->power_detect) & PW_DETECT) { + VDBG(dev, "connect\n"); + ep0_start(dev); + } else { + DBG(dev, "disconnect\n"); + if (dev->gadget.speed == USB_SPEED_FULL) + stop_activity(dev, dev->driver); + dev->ep0state = EP0_DISCONNECT; + dev->int_enable = INT_DEVWIDE; + writel(dev->int_enable, &dev->regs->int_enable); + } + stat = 0; + handled = 1; + goto done; + } + if (stat & INT_SUSPEND) { + ACK(INT_SUSPEND); + if (readl(®s->ep_status[0]) & EPxSTATUS_SUSPEND) { + switch (dev->ep0state) { + case EP0_DISCONNECT: + case EP0_SUSPEND: + goto pm_next; + default: + break; + } + DBG(dev, "USB suspend\n"); + dev->ep0state = EP0_SUSPEND; + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->suspend) { + spin_unlock(&dev->lock); + dev->driver->suspend(&dev->gadget); + spin_lock(&dev->lock); + } + } else { + if (dev->ep0state != EP0_SUSPEND) { + DBG(dev, "bogus USB resume %d\n", + dev->ep0state); + goto pm_next; + } + DBG(dev, "USB resume\n"); + dev->ep0state = EP0_IDLE; + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume) { + spin_unlock(&dev->lock); + dev->driver->resume(&dev->gadget); + spin_lock(&dev->lock); + } + } + } +pm_next: + if (stat & INT_USBRESET) { /* hub reset done */ + ACK(INT_USBRESET); + INFO(dev, "USB reset done, gadget %s\n", + dev->driver->driver.name); + } + // and INT_ERR on some endpoint's crc/bitstuff/... problem + } + + /* progress ep0 setup, data, or status stages. + * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs + */ + if (stat & INT_SETUP) { + ACK(INT_SETUP); + dev->ep[0].irqs++; + ep0_setup(dev); + } + if (stat & INT_STATUSNAK) { + ACK(INT_STATUSNAK|INT_ENDPOINT0); + if (dev->ep0state == EP0_IN) { + ep = &dev->ep[0]; + ep->irqs++; + nuke(ep, 0); + writel(~(1<<0), ®s->EOP); + dev->ep0state = EP0_STATUS; + } + } + if (stat & INT_ENDPOINT0) { + ACK(INT_ENDPOINT0); + ep = &dev->ep[0]; + ep->irqs++; + pio_advance(ep); + } + + /* dma completion */ + if (stat & INT_MSTRDEND) { /* IN */ + ACK(INT_MSTRDEND); + ep = &dev->ep[UDC_MSTRD_ENDPOINT]; + ep->irqs++; + dma_advance(dev, ep); + } + if (stat & INT_MSTWREND) { /* OUT */ + ACK(INT_MSTWREND); + ep = &dev->ep[UDC_MSTWR_ENDPOINT]; + ep->irqs++; + dma_advance(dev, ep); + } + if (stat & INT_MSTWRTMOUT) { /* OUT */ + ACK(INT_MSTWRTMOUT); + ep = &dev->ep[UDC_MSTWR_ENDPOINT]; + ep->irqs++; + ERROR(dev, "%s write timeout ?\n", ep->ep.name); + // reset dma? then dma_advance() + } + + /* pio */ + for (i = 1; i < 4; i++) { + u32 tmp = INT_EPxDATASET(i); + + if (!(stat & tmp)) + continue; + ep = &dev->ep[i]; + pio_advance(ep); + if (list_empty (&ep->queue)) + pio_irq_disable(dev, regs, i); + stat &= ~tmp; + handled = 1; + ep->irqs++; + } + + if (rescans--) + goto rescan; + +done: + (void)readl(®s->int_enable); + spin_unlock(&dev->lock); + if (stat) + DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat, + readl(®s->int_status), dev->int_enable); + return IRQ_RETVAL(handled); +} + +#undef ACK + +/*-------------------------------------------------------------------------*/ + +static void gadget_release(struct device *_dev) +{ + struct goku_udc *dev = dev_get_drvdata(_dev); + + kfree(dev); +} + +/* tear down the binding between this driver and the pci device */ + +static void goku_remove(struct pci_dev *pdev) +{ + struct goku_udc *dev = pci_get_drvdata(pdev); + + DBG(dev, "%s\n", __FUNCTION__); + /* start with the driver above us */ + if (dev->driver) { + /* should have been done already by driver model core */ + WARN(dev, "pci remove, driver '%s' is still registered\n", + dev->driver->driver.name); + usb_gadget_unregister_driver(dev->driver); + } + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + remove_proc_entry(proc_node_name, NULL); +#endif + if (dev->regs) + udc_reset(dev); + if (dev->got_irq) + free_irq(pdev->irq, dev); + if (dev->regs) + iounmap(dev->regs); + if (dev->got_region) + release_mem_region(pci_resource_start (pdev, 0), + pci_resource_len (pdev, 0)); + if (dev->enabled) + pci_disable_device(pdev); + device_unregister(&dev->gadget.dev); + + pci_set_drvdata(pdev, NULL); + dev->regs = NULL; + the_controller = NULL; + + INFO(dev, "unbind\n"); +} + +/* wrap this driver around the specified pci device, but + * don't respond over USB until a gadget driver binds to us. + */ + +static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct goku_udc *dev = NULL; + unsigned long resource, len; + void __iomem *base = NULL; + int retval; + char buf [8], *bufp; + + /* if you want to support more than one controller in a system, + * usb_gadget_driver_{register,unregister}() must change. + */ + if (the_controller) { + WARN(dev, "ignoring %s\n", pci_name(pdev)); + return -EBUSY; + } + if (!pdev->irq) { + printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev)); + retval = -ENODEV; + goto done; + } + + /* alloc, and start init */ + dev = kmalloc (sizeof *dev, SLAB_KERNEL); + if (dev == NULL){ + pr_debug("enomem %s\n", pci_name(pdev)); + retval = -ENOMEM; + goto done; + } + + memset(dev, 0, sizeof *dev); + spin_lock_init(&dev->lock); + dev->pdev = pdev; + dev->gadget.ops = &goku_ops; + + /* the "gadget" abstracts/virtualizes the controller */ + strcpy(dev->gadget.dev.bus_id, "gadget"); + dev->gadget.dev.parent = &pdev->dev; + dev->gadget.dev.dma_mask = pdev->dev.dma_mask; + dev->gadget.dev.release = gadget_release; + dev->gadget.name = driver_name; + + /* now all the pci goodies ... */ + retval = pci_enable_device(pdev); + if (retval < 0) { + DBG(dev, "can't enable, %d\n", retval); + goto done; + } + dev->enabled = 1; + + resource = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + if (!request_mem_region(resource, len, driver_name)) { + DBG(dev, "controller already in use\n"); + retval = -EBUSY; + goto done; + } + dev->got_region = 1; + + base = ioremap_nocache(resource, len); + if (base == NULL) { + DBG(dev, "can't map memory\n"); + retval = -EFAULT; + goto done; + } + dev->regs = (struct goku_udc_regs __iomem *) base; + + pci_set_drvdata(pdev, dev); + INFO(dev, "%s\n", driver_desc); + INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr()); +#ifndef __sparc__ + scnprintf(buf, sizeof buf, "%d", pdev->irq); + bufp = buf; +#else + bufp = __irq_itoa(pdev->irq); +#endif + INFO(dev, "irq %s, pci mem %p\n", bufp, base); + + /* init to known state, then setup irqs */ + udc_reset(dev); + udc_reinit (dev); + if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/, + driver_name, dev) != 0) { + DBG(dev, "request interrupt %s failed\n", bufp); + retval = -EBUSY; + goto done; + } + dev->got_irq = 1; + if (use_dma) + pci_set_master(pdev); + + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev); +#endif + + /* done */ + the_controller = dev; + device_register(&dev->gadget.dev); + + return 0; + +done: + if (dev) + goku_remove (pdev); + return retval; +} + + +/*-------------------------------------------------------------------------*/ + +static struct pci_device_id pci_ids [] = { { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = 0x102f, /* Toshiba */ + .device = 0x0107, /* this UDC */ + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + +}, { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE (pci, pci_ids); + +static struct pci_driver goku_pci_driver = { + .name = (char *) driver_name, + .id_table = pci_ids, + + .probe = goku_probe, + .remove = goku_remove, + + /* FIXME add power management support */ +}; + +static int __init init (void) +{ + return pci_register_driver (&goku_pci_driver); +} +module_init (init); + +static void __exit cleanup (void) +{ + pci_unregister_driver (&goku_pci_driver); +} +module_exit (cleanup); diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h new file mode 100644 index 0000000..ea8c8e5 --- /dev/null +++ b/drivers/usb/gadget/goku_udc.h @@ -0,0 +1,290 @@ +/* + * Toshiba TC86C001 ("Goku-S") USB Device Controller driver + * + * Copyright (C) 2000-2002 Lineo + * by Stuart Lynne, Tom Rushworth, and Bruce Balden + * Copyright (C) 2002 Toshiba Corporation + * Copyright (C) 2003 MontaVista Software (source@mvista.com) + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * PCI BAR 0 points to these registers. + */ +struct goku_udc_regs { + /* irq management */ + u32 int_status; /* 0x000 */ + u32 int_enable; +#define INT_SUSPEND 0x00001 /* or resume */ +#define INT_USBRESET 0x00002 +#define INT_ENDPOINT0 0x00004 +#define INT_SETUP 0x00008 +#define INT_STATUS 0x00010 +#define INT_STATUSNAK 0x00020 +#define INT_EPxDATASET(n) (0x00020 << (n)) /* 0 < n < 4 */ +# define INT_EP1DATASET 0x00040 +# define INT_EP2DATASET 0x00080 +# define INT_EP3DATASET 0x00100 +#define INT_EPnNAK(n) (0x00100 < (n)) /* 0 < n < 4 */ +# define INT_EP1NAK 0x00200 +# define INT_EP2NAK 0x00400 +# define INT_EP3NAK 0x00800 +#define INT_SOF 0x01000 +#define INT_ERR 0x02000 +#define INT_MSTWRSET 0x04000 +#define INT_MSTWREND 0x08000 +#define INT_MSTWRTMOUT 0x10000 +#define INT_MSTRDEND 0x20000 +#define INT_SYSERROR 0x40000 +#define INT_PWRDETECT 0x80000 + +#define INT_DEVWIDE (INT_PWRDETECT|INT_SYSERROR/*|INT_ERR*/|INT_USBRESET|INT_SUSPEND) +#define INT_EP0 (INT_SETUP|INT_ENDPOINT0/*|INT_STATUS*/|INT_STATUSNAK) + + u32 dma_master; +#define MST_EOPB_DIS 0x0800 +#define MST_EOPB_ENA 0x0400 +#define MST_TIMEOUT_DIS 0x0200 +#define MST_TIMEOUT_ENA 0x0100 +#define MST_RD_EOPB 0x0080 /* write-only */ +#define MST_RD_RESET 0x0040 +#define MST_WR_RESET 0x0020 +#define MST_RD_ENA 0x0004 /* 1:start, 0:ignore */ +#define MST_WR_ENA 0x0002 /* 1:start, 0:ignore */ +#define MST_CONNECTION 0x0001 /* 0 for ep1out/ep2in */ + +#define MST_R_BITS (MST_EOPB_DIS|MST_EOPB_ENA \ + |MST_RD_ENA|MST_RD_RESET) +#define MST_W_BITS (MST_TIMEOUT_DIS|MST_TIMEOUT_ENA \ + |MST_WR_ENA|MST_WR_RESET) +#define MST_RW_BITS (MST_R_BITS|MST_W_BITS \ + |MST_CONNECTION) + +/* these values assume (dma_master & MST_CONNECTION) == 0 */ +#define UDC_MSTWR_ENDPOINT 1 +#define UDC_MSTRD_ENDPOINT 2 + + /* dma master write */ + u32 out_dma_start; + u32 out_dma_end; + u32 out_dma_current; + + /* dma master read */ + u32 in_dma_start; + u32 in_dma_end; + u32 in_dma_current; + + u32 power_detect; +#define PW_DETECT 0x04 +#define PW_RESETB 0x02 +#define PW_PULLUP 0x01 + + u8 _reserved0 [0x1d8]; + + /* endpoint registers */ + u32 ep_fifo [4]; /* 0x200 */ + u8 _reserved1 [0x10]; + u32 ep_mode [4]; /* only 1-3 valid */ + u8 _reserved2 [0x10]; + + u32 ep_status [4]; +#define EPxSTATUS_TOGGLE 0x40 +#define EPxSTATUS_SUSPEND 0x20 +#define EPxSTATUS_EP_MASK (0x07<<2) +# define EPxSTATUS_EP_READY (0<<2) +# define EPxSTATUS_EP_DATAIN (1<<2) +# define EPxSTATUS_EP_FULL (2<<2) +# define EPxSTATUS_EP_TX_ERR (3<<2) +# define EPxSTATUS_EP_RX_ERR (4<<2) +# define EPxSTATUS_EP_BUSY (5<<2) +# define EPxSTATUS_EP_STALL (6<<2) +# define EPxSTATUS_EP_INVALID (7<<2) +#define EPxSTATUS_FIFO_DISABLE 0x02 +#define EPxSTATUS_STAGE_ERROR 0x01 + + u8 _reserved3 [0x10]; + u32 EPxSizeLA[4]; +#define PACKET_ACTIVE (1<<7) +#define DATASIZE 0x7f + u8 _reserved3a [0x10]; + u32 EPxSizeLB[4]; /* only 1,2 valid */ + u8 _reserved3b [0x10]; + u32 EPxSizeHA[4]; /* only 1-3 valid */ + u8 _reserved3c [0x10]; + u32 EPxSizeHB[4]; /* only 1,2 valid */ + u8 _reserved4[0x30]; + + /* SETUP packet contents */ + u32 bRequestType; /* 0x300 */ + u32 bRequest; + u32 wValueL; + u32 wValueH; + u32 wIndexL; + u32 wIndexH; + u32 wLengthL; + u32 wLengthH; + + /* command interaction/handshaking */ + u32 SetupRecv; /* 0x320 */ + u32 CurrConfig; + u32 StdRequest; + u32 Request; + u32 DataSet; +#define DATASET_A(epnum) (1<<(2*(epnum))) +#define DATASET_B(epnum) (2<<(2*(epnum))) +#define DATASET_AB(epnum) (3<<(2*(epnum))) + u8 _reserved5[4]; + + u32 UsbState; +#define USBSTATE_CONFIGURED 0x04 +#define USBSTATE_ADDRESSED 0x02 +#define USBSTATE_DEFAULT 0x01 + + u32 EOP; + + u32 Command; /* 0x340 */ +#define COMMAND_SETDATA0 2 +#define COMMAND_RESET 3 +#define COMMAND_STALL 4 +#define COMMAND_INVALID 5 +#define COMMAND_FIFO_DISABLE 7 +#define COMMAND_FIFO_ENABLE 8 +#define COMMAND_INIT_DESCRIPTOR 9 +#define COMMAND_FIFO_CLEAR 10 /* also stall */ +#define COMMAND_STALL_CLEAR 11 +#define COMMAND_EP(n) ((n) << 4) + + u32 EPxSingle; + u8 _reserved6[4]; + u32 EPxBCS; + u8 _reserved7[8]; + u32 IntControl; +#define ICONTROL_STATUSNAK 1 + u8 _reserved8[4]; + + u32 reqmode; // 0x360 standard request mode, low 8 bits +#define G_REQMODE_SET_INTF (1<<7) +#define G_REQMODE_GET_INTF (1<<6) +#define G_REQMODE_SET_CONF (1<<5) +#define G_REQMODE_GET_CONF (1<<4) +#define G_REQMODE_GET_DESC (1<<3) +#define G_REQMODE_SET_FEAT (1<<2) +#define G_REQMODE_CLEAR_FEAT (1<<1) +#define G_REQMODE_GET_STATUS (1<<0) + + u32 ReqMode; + u8 _reserved9[0x18]; + u32 PortStatus; /* 0x380 */ + u8 _reserved10[8]; + u32 address; + u32 buff_test; + u8 _reserved11[4]; + u32 UsbReady; + u8 _reserved12[4]; + u32 SetDescStall; /* 0x3a0 */ + u8 _reserved13[0x45c]; + + /* hardware could handle limited GET_DESCRIPTOR duties */ +#define DESC_LEN 0x80 + u32 descriptors[DESC_LEN]; /* 0x800 */ + u8 _reserved14[0x600]; + +} __attribute__ ((packed)); + +#define MAX_FIFO_SIZE 64 +#define MAX_EP0_SIZE 8 /* ep0 fifo is bigger, though */ + + +/*-------------------------------------------------------------------------*/ + +/* DRIVER DATA STRUCTURES and UTILITIES */ + +struct goku_ep { + struct usb_ep ep; + struct goku_udc *dev; + unsigned long irqs; + + unsigned num:8, + dma:1, + is_in:1, + stopped:1; + + /* analogous to a host-side qh */ + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + + u32 __iomem *reg_fifo; + u32 __iomem *reg_mode; + u32 __iomem *reg_status; +}; + +struct goku_request { + struct usb_request req; + struct list_head queue; + + unsigned mapped:1; +}; + +enum ep0state { + EP0_DISCONNECT, /* no host */ + EP0_IDLE, /* between STATUS ack and SETUP report */ + EP0_IN, EP0_OUT, /* data stage */ + EP0_STATUS, /* status stage */ + EP0_STALL, /* data or status stages */ + EP0_SUSPEND, /* usb suspend */ +}; + +struct goku_udc { + /* each pci device provides one gadget, several endpoints */ + struct usb_gadget gadget; + spinlock_t lock; + struct goku_ep ep[4]; + struct usb_gadget_driver *driver; + + enum ep0state ep0state; + unsigned got_irq:1, + got_region:1, + req_config:1, + configured:1, + enabled:1; + + /* pci state used to access those endpoints */ + struct pci_dev *pdev; + struct goku_udc_regs __iomem *regs; + u32 int_enable; + + /* statistics... */ + unsigned long irqs; +}; + +/*-------------------------------------------------------------------------*/ + +#define xprintk(dev,level,fmt,args...) \ + printk(level "%s %s: " fmt , driver_name , \ + pci_name(dev->pdev) , ## args) + +#ifdef DEBUG +#define DBG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(dev,fmt,args...) \ + do { } while (0) +#endif /* VERBOSE */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARN(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c new file mode 100644 index 0000000..2cff67c --- /dev/null +++ b/drivers/usb/gadget/inode.c @@ -0,0 +1,2110 @@ +/* + * inode.c -- user mode filesystem api for usb gadget controllers + * + * Copyright (C) 2003-2004 David Brownell + * Copyright (C) 2003 Agilent Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +// #define DEBUG /* data to help fault diagnosis */ +// #define VERBOSE /* extra debug messages (success too) */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/pagemap.h> +#include <linux/uts.h> +#include <linux/wait.h> +#include <linux/compiler.h> +#include <asm/uaccess.h> +#include <linux/slab.h> + +#include <linux/device.h> +#include <linux/moduleparam.h> + +#include <linux/usb_gadgetfs.h> +#include <linux/usb_gadget.h> + + +/* + * The gadgetfs API maps each endpoint to a file descriptor so that you + * can use standard synchronous read/write calls for I/O. There's some + * O_NONBLOCK and O_ASYNC/FASYNC style i/o support. Example usermode + * drivers show how this works in practice. You can also use AIO to + * eliminate I/O gaps between requests, to help when streaming data. + * + * Key parts that must be USB-specific are protocols defining how the + * read/write operations relate to the hardware state machines. There + * are two types of files. One type is for the device, implementing ep0. + * The other type is for each IN or OUT endpoint. In both cases, the + * user mode driver must configure the hardware before using it. + * + * - First, dev_config() is called when /dev/gadget/$CHIP is configured + * (by writing configuration and device descriptors). Afterwards it + * may serve as a source of device events, used to handle all control + * requests other than basic enumeration. + * + * - Then either immediately, or after a SET_CONFIGURATION control request, + * ep_config() is called when each /dev/gadget/ep* file is configured + * (by writing endpoint descriptors). Afterwards these files are used + * to write() IN data or to read() OUT data. To halt the endpoint, a + * "wrong direction" request is issued (like reading an IN endpoint). + * + * Unlike "usbfs" the only ioctl()s are for things that are rare, and maybe + * not possible on all hardware. For example, precise fault handling with + * respect to data left in endpoint fifos after aborted operations; or + * selective clearing of endpoint halts, to implement SET_INTERFACE. + */ + +#define DRIVER_DESC "USB Gadget filesystem" +#define DRIVER_VERSION "24 Aug 2004" + +static const char driver_desc [] = DRIVER_DESC; +static const char shortname [] = "gadgetfs"; + +MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_AUTHOR ("David Brownell"); +MODULE_LICENSE ("GPL"); + + +/*----------------------------------------------------------------------*/ + +#define GADGETFS_MAGIC 0xaee71ee7 +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +/* /dev/gadget/$CHIP represents ep0 and the whole device */ +enum ep0_state { + /* DISBLED is the initial state. + */ + STATE_DEV_DISABLED = 0, + + /* Only one open() of /dev/gadget/$CHIP; only one file tracks + * ep0/device i/o modes and binding to the controller. Driver + * must always write descriptors to initialize the device, then + * the device becomes UNCONNECTED until enumeration. + */ + STATE_OPENED, + + /* From then on, ep0 fd is in either of two basic modes: + * - (UN)CONNECTED: read usb_gadgetfs_event(s) from it + * - SETUP: read/write will transfer control data and succeed; + * or if "wrong direction", performs protocol stall + */ + STATE_UNCONNECTED, + STATE_CONNECTED, + STATE_SETUP, + + /* UNBOUND means the driver closed ep0, so the device won't be + * accessible again (DEV_DISABLED) until all fds are closed. + */ + STATE_DEV_UNBOUND, +}; + +/* enough for the whole queue: most events invalidate others */ +#define N_EVENT 5 + +struct dev_data { + spinlock_t lock; + atomic_t count; + enum ep0_state state; + struct usb_gadgetfs_event event [N_EVENT]; + unsigned ev_next; + struct fasync_struct *fasync; + u8 current_config; + + /* drivers reading ep0 MUST handle control requests (SETUP) + * reported that way; else the host will time out. + */ + unsigned usermode_setup : 1, + setup_in : 1, + setup_can_stall : 1, + setup_out_ready : 1, + setup_out_error : 1, + setup_abort : 1; + + /* the rest is basically write-once */ + struct usb_config_descriptor *config, *hs_config; + struct usb_device_descriptor *dev; + struct usb_request *req; + struct usb_gadget *gadget; + struct list_head epfiles; + void *buf; + wait_queue_head_t wait; + struct super_block *sb; + struct dentry *dentry; + + /* except this scratch i/o buffer for ep0 */ + u8 rbuf [256]; +}; + +static inline void get_dev (struct dev_data *data) +{ + atomic_inc (&data->count); +} + +static void put_dev (struct dev_data *data) +{ + if (likely (!atomic_dec_and_test (&data->count))) + return; + /* needs no more cleanup */ + BUG_ON (waitqueue_active (&data->wait)); + kfree (data); +} + +static struct dev_data *dev_new (void) +{ + struct dev_data *dev; + + dev = kmalloc (sizeof *dev, GFP_KERNEL); + if (!dev) + return NULL; + memset (dev, 0, sizeof *dev); + dev->state = STATE_DEV_DISABLED; + atomic_set (&dev->count, 1); + spin_lock_init (&dev->lock); + INIT_LIST_HEAD (&dev->epfiles); + init_waitqueue_head (&dev->wait); + return dev; +} + +/*----------------------------------------------------------------------*/ + +/* other /dev/gadget/$ENDPOINT files represent endpoints */ +enum ep_state { + STATE_EP_DISABLED = 0, + STATE_EP_READY, + STATE_EP_DEFER_ENABLE, + STATE_EP_ENABLED, + STATE_EP_UNBOUND, +}; + +struct ep_data { + struct semaphore lock; + enum ep_state state; + atomic_t count; + struct dev_data *dev; + /* must hold dev->lock before accessing ep or req */ + struct usb_ep *ep; + struct usb_request *req; + ssize_t status; + char name [16]; + struct usb_endpoint_descriptor desc, hs_desc; + struct list_head epfiles; + wait_queue_head_t wait; + struct dentry *dentry; + struct inode *inode; +}; + +static inline void get_ep (struct ep_data *data) +{ + atomic_inc (&data->count); +} + +static void put_ep (struct ep_data *data) +{ + if (likely (!atomic_dec_and_test (&data->count))) + return; + put_dev (data->dev); + /* needs no more cleanup */ + BUG_ON (!list_empty (&data->epfiles)); + BUG_ON (waitqueue_active (&data->wait)); + BUG_ON (down_trylock (&data->lock) != 0); + kfree (data); +} + +/*----------------------------------------------------------------------*/ + +/* most "how to use the hardware" policy choices are in userspace: + * mapping endpoint roles (which the driver needs) to the capabilities + * which the usb controller has. most of those capabilities are exposed + * implicitly, starting with the driver name and then endpoint names. + */ + +static const char *CHIP; + +/*----------------------------------------------------------------------*/ + +/* NOTE: don't use dev_printk calls before binding to the gadget + * at the end of ep0 configuration, or after unbind. + */ + +/* too wordy: dev_printk(level , &(d)->gadget->dev , fmt , ## args) */ +#define xprintk(d,level,fmt,args...) \ + printk(level "%s: " fmt , shortname , ## args) + +#ifdef DEBUG +#define DBG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDEBUG DBG +#else +#define VDEBUG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARN(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + + +/*----------------------------------------------------------------------*/ + +/* SYNCHRONOUS ENDPOINT OPERATIONS (bulk/intr/iso) + * + * After opening, configure non-control endpoints. Then use normal + * stream read() and write() requests; and maybe ioctl() to get more + * precise FIFO status when recovering from cancelation. + */ + +static void epio_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct ep_data *epdata = ep->driver_data; + + if (!req->context) + return; + if (req->status) + epdata->status = req->status; + else + epdata->status = req->actual; + complete ((struct completion *)req->context); +} + +/* tasklock endpoint, returning when it's connected. + * still need dev->lock to use epdata->ep. + */ +static int +get_ready_ep (unsigned f_flags, struct ep_data *epdata) +{ + int val; + + if (f_flags & O_NONBLOCK) { + if (down_trylock (&epdata->lock) != 0) + goto nonblock; + if (epdata->state != STATE_EP_ENABLED) { + up (&epdata->lock); +nonblock: + val = -EAGAIN; + } else + val = 0; + return val; + } + + if ((val = down_interruptible (&epdata->lock)) < 0) + return val; +newstate: + switch (epdata->state) { + case STATE_EP_ENABLED: + break; + case STATE_EP_DEFER_ENABLE: + DBG (epdata->dev, "%s wait for host\n", epdata->name); + if ((val = wait_event_interruptible (epdata->wait, + epdata->state != STATE_EP_DEFER_ENABLE + || epdata->dev->state == STATE_DEV_UNBOUND + )) < 0) + goto fail; + goto newstate; + // case STATE_EP_DISABLED: /* "can't happen" */ + // case STATE_EP_READY: /* "can't happen" */ + default: /* error! */ + pr_debug ("%s: ep %p not available, state %d\n", + shortname, epdata, epdata->state); + // FALLTHROUGH + case STATE_EP_UNBOUND: /* clean disconnect */ + val = -ENODEV; +fail: + up (&epdata->lock); + } + return val; +} + +static ssize_t +ep_io (struct ep_data *epdata, void *buf, unsigned len) +{ + DECLARE_COMPLETION (done); + int value; + + spin_lock_irq (&epdata->dev->lock); + if (likely (epdata->ep != NULL)) { + struct usb_request *req = epdata->req; + + req->context = &done; + req->complete = epio_complete; + req->buf = buf; + req->length = len; + value = usb_ep_queue (epdata->ep, req, GFP_ATOMIC); + } else + value = -ENODEV; + spin_unlock_irq (&epdata->dev->lock); + + if (likely (value == 0)) { + value = wait_event_interruptible (done.wait, done.done); + if (value != 0) { + spin_lock_irq (&epdata->dev->lock); + if (likely (epdata->ep != NULL)) { + DBG (epdata->dev, "%s i/o interrupted\n", + epdata->name); + usb_ep_dequeue (epdata->ep, epdata->req); + spin_unlock_irq (&epdata->dev->lock); + + wait_event (done.wait, done.done); + if (epdata->status == -ECONNRESET) + epdata->status = -EINTR; + } else { + spin_unlock_irq (&epdata->dev->lock); + + DBG (epdata->dev, "endpoint gone\n"); + epdata->status = -ENODEV; + } + } + return epdata->status; + } + return value; +} + + +/* handle a synchronous OUT bulk/intr/iso transfer */ +static ssize_t +ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) +{ + struct ep_data *data = fd->private_data; + void *kbuf; + ssize_t value; + + if ((value = get_ready_ep (fd->f_flags, data)) < 0) + return value; + + /* halt any endpoint by doing a "wrong direction" i/o call */ + if (data->desc.bEndpointAddress & USB_DIR_IN) { + if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_ISOC) + return -EINVAL; + DBG (data->dev, "%s halt\n", data->name); + spin_lock_irq (&data->dev->lock); + if (likely (data->ep != NULL)) + usb_ep_set_halt (data->ep); + spin_unlock_irq (&data->dev->lock); + up (&data->lock); + return -EBADMSG; + } + + /* FIXME readahead for O_NONBLOCK and poll(); careful with ZLPs */ + + value = -ENOMEM; + kbuf = kmalloc (len, SLAB_KERNEL); + if (unlikely (!kbuf)) + goto free1; + + value = ep_io (data, kbuf, len); + VDEBUG (data->dev, "%s read %d OUT, status %d\n", + data->name, len, value); + if (value >= 0 && copy_to_user (buf, kbuf, value)) + value = -EFAULT; + +free1: + up (&data->lock); + kfree (kbuf); + return value; +} + +/* handle a synchronous IN bulk/intr/iso transfer */ +static ssize_t +ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) +{ + struct ep_data *data = fd->private_data; + void *kbuf; + ssize_t value; + + if ((value = get_ready_ep (fd->f_flags, data)) < 0) + return value; + + /* halt any endpoint by doing a "wrong direction" i/o call */ + if (!(data->desc.bEndpointAddress & USB_DIR_IN)) { + if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_ISOC) + return -EINVAL; + DBG (data->dev, "%s halt\n", data->name); + spin_lock_irq (&data->dev->lock); + if (likely (data->ep != NULL)) + usb_ep_set_halt (data->ep); + spin_unlock_irq (&data->dev->lock); + up (&data->lock); + return -EBADMSG; + } + + /* FIXME writebehind for O_NONBLOCK and poll(), qlen = 1 */ + + value = -ENOMEM; + kbuf = kmalloc (len, SLAB_KERNEL); + if (!kbuf) + goto free1; + if (copy_from_user (kbuf, buf, len)) { + value = -EFAULT; + goto free1; + } + + value = ep_io (data, kbuf, len); + VDEBUG (data->dev, "%s write %d IN, status %d\n", + data->name, len, value); +free1: + up (&data->lock); + kfree (kbuf); + return value; +} + +static int +ep_release (struct inode *inode, struct file *fd) +{ + struct ep_data *data = fd->private_data; + + /* clean up if this can be reopened */ + if (data->state != STATE_EP_UNBOUND) { + data->state = STATE_EP_DISABLED; + data->desc.bDescriptorType = 0; + data->hs_desc.bDescriptorType = 0; + } + put_ep (data); + return 0; +} + +static int ep_ioctl (struct inode *inode, struct file *fd, + unsigned code, unsigned long value) +{ + struct ep_data *data = fd->private_data; + int status; + + if ((status = get_ready_ep (fd->f_flags, data)) < 0) + return status; + + spin_lock_irq (&data->dev->lock); + if (likely (data->ep != NULL)) { + switch (code) { + case GADGETFS_FIFO_STATUS: + status = usb_ep_fifo_status (data->ep); + break; + case GADGETFS_FIFO_FLUSH: + usb_ep_fifo_flush (data->ep); + break; + case GADGETFS_CLEAR_HALT: + status = usb_ep_clear_halt (data->ep); + break; + default: + status = -ENOTTY; + } + } else + status = -ENODEV; + spin_unlock_irq (&data->dev->lock); + up (&data->lock); + return status; +} + +/*----------------------------------------------------------------------*/ + +/* ASYNCHRONOUS ENDPOINT I/O OPERATIONS (bulk/intr/iso) */ + +struct kiocb_priv { + struct usb_request *req; + struct ep_data *epdata; + void *buf; + char __user *ubuf; + unsigned actual; +}; + +static int ep_aio_cancel(struct kiocb *iocb, struct io_event *e) +{ + struct kiocb_priv *priv = iocb->private; + struct ep_data *epdata; + int value; + + local_irq_disable(); + epdata = priv->epdata; + // spin_lock(&epdata->dev->lock); + kiocbSetCancelled(iocb); + if (likely(epdata && epdata->ep && priv->req)) + value = usb_ep_dequeue (epdata->ep, priv->req); + else + value = -EINVAL; + // spin_unlock(&epdata->dev->lock); + local_irq_enable(); + + aio_put_req(iocb); + return value; +} + +static ssize_t ep_aio_read_retry(struct kiocb *iocb) +{ + struct kiocb_priv *priv = iocb->private; + ssize_t status = priv->actual; + + /* we "retry" to get the right mm context for this: */ + status = copy_to_user(priv->ubuf, priv->buf, priv->actual); + if (unlikely(0 != status)) + status = -EFAULT; + else + status = priv->actual; + kfree(priv->buf); + kfree(priv); + aio_put_req(iocb); + return status; +} + +static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct kiocb *iocb = req->context; + struct kiocb_priv *priv = iocb->private; + struct ep_data *epdata = priv->epdata; + + /* lock against disconnect (and ideally, cancel) */ + spin_lock(&epdata->dev->lock); + priv->req = NULL; + priv->epdata = NULL; + if (NULL == iocb->ki_retry + || unlikely(0 == req->actual) + || unlikely(kiocbIsCancelled(iocb))) { + kfree(req->buf); + kfree(priv); + iocb->private = NULL; + /* aio_complete() reports bytes-transferred _and_ faults */ + if (unlikely(kiocbIsCancelled(iocb))) + aio_put_req(iocb); + else + aio_complete(iocb, + req->actual ? req->actual : req->status, + req->status); + } else { + /* retry() won't report both; so we hide some faults */ + if (unlikely(0 != req->status)) + DBG(epdata->dev, "%s fault %d len %d\n", + ep->name, req->status, req->actual); + + priv->buf = req->buf; + priv->actual = req->actual; + kick_iocb(iocb); + } + spin_unlock(&epdata->dev->lock); + + usb_ep_free_request(ep, req); + put_ep(epdata); +} + +static ssize_t +ep_aio_rwtail( + struct kiocb *iocb, + char *buf, + size_t len, + struct ep_data *epdata, + char __user *ubuf +) +{ + struct kiocb_priv *priv = (void *) &iocb->private; + struct usb_request *req; + ssize_t value; + + priv = kmalloc(sizeof *priv, GFP_KERNEL); + if (!priv) { + value = -ENOMEM; +fail: + kfree(buf); + return value; + } + iocb->private = priv; + priv->ubuf = ubuf; + + value = get_ready_ep(iocb->ki_filp->f_flags, epdata); + if (unlikely(value < 0)) { + kfree(priv); + goto fail; + } + + iocb->ki_cancel = ep_aio_cancel; + get_ep(epdata); + priv->epdata = epdata; + priv->actual = 0; + + /* each kiocb is coupled to one usb_request, but we can't + * allocate or submit those if the host disconnected. + */ + spin_lock_irq(&epdata->dev->lock); + if (likely(epdata->ep)) { + req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC); + if (likely(req)) { + priv->req = req; + req->buf = buf; + req->length = len; + req->complete = ep_aio_complete; + req->context = iocb; + value = usb_ep_queue(epdata->ep, req, GFP_ATOMIC); + if (unlikely(0 != value)) + usb_ep_free_request(epdata->ep, req); + } else + value = -EAGAIN; + } else + value = -ENODEV; + spin_unlock_irq(&epdata->dev->lock); + + up(&epdata->lock); + + if (unlikely(value)) { + kfree(priv); + put_ep(epdata); + } else + value = -EIOCBQUEUED; + return value; +} + +static ssize_t +ep_aio_read(struct kiocb *iocb, char __user *ubuf, size_t len, loff_t o) +{ + struct ep_data *epdata = iocb->ki_filp->private_data; + char *buf; + + if (unlikely(epdata->desc.bEndpointAddress & USB_DIR_IN)) + return -EINVAL; + buf = kmalloc(len, GFP_KERNEL); + if (unlikely(!buf)) + return -ENOMEM; + iocb->ki_retry = ep_aio_read_retry; + return ep_aio_rwtail(iocb, buf, len, epdata, ubuf); +} + +static ssize_t +ep_aio_write(struct kiocb *iocb, const char __user *ubuf, size_t len, loff_t o) +{ + struct ep_data *epdata = iocb->ki_filp->private_data; + char *buf; + + if (unlikely(!(epdata->desc.bEndpointAddress & USB_DIR_IN))) + return -EINVAL; + buf = kmalloc(len, GFP_KERNEL); + if (unlikely(!buf)) + return -ENOMEM; + if (unlikely(copy_from_user(buf, ubuf, len) != 0)) { + kfree(buf); + return -EFAULT; + } + return ep_aio_rwtail(iocb, buf, len, epdata, NULL); +} + +/*----------------------------------------------------------------------*/ + +/* used after endpoint configuration */ +static struct file_operations ep_io_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + + .read = ep_read, + .write = ep_write, + .ioctl = ep_ioctl, + .release = ep_release, + + .aio_read = ep_aio_read, + .aio_write = ep_aio_write, +}; + +/* ENDPOINT INITIALIZATION + * + * fd = open ("/dev/gadget/$ENDPOINT", O_RDWR) + * status = write (fd, descriptors, sizeof descriptors) + * + * That write establishes the endpoint configuration, configuring + * the controller to process bulk, interrupt, or isochronous transfers + * at the right maxpacket size, and so on. + * + * The descriptors are message type 1, identified by a host order u32 + * at the beginning of what's written. Descriptor order is: full/low + * speed descriptor, then optional high speed descriptor. + */ +static ssize_t +ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) +{ + struct ep_data *data = fd->private_data; + struct usb_ep *ep; + u32 tag; + int value; + + if ((value = down_interruptible (&data->lock)) < 0) + return value; + + if (data->state != STATE_EP_READY) { + value = -EL2HLT; + goto fail; + } + + value = len; + if (len < USB_DT_ENDPOINT_SIZE + 4) + goto fail0; + + /* we might need to change message format someday */ + if (copy_from_user (&tag, buf, 4)) { + goto fail1; + } + if (tag != 1) { + DBG(data->dev, "config %s, bad tag %d\n", data->name, tag); + goto fail0; + } + buf += 4; + len -= 4; + + /* NOTE: audio endpoint extensions not accepted here; + * just don't include the extra bytes. + */ + + /* full/low speed descriptor, then high speed */ + if (copy_from_user (&data->desc, buf, USB_DT_ENDPOINT_SIZE)) { + goto fail1; + } + if (data->desc.bLength != USB_DT_ENDPOINT_SIZE + || data->desc.bDescriptorType != USB_DT_ENDPOINT) + goto fail0; + if (len != USB_DT_ENDPOINT_SIZE) { + if (len != 2 * USB_DT_ENDPOINT_SIZE) + goto fail0; + if (copy_from_user (&data->hs_desc, buf + USB_DT_ENDPOINT_SIZE, + USB_DT_ENDPOINT_SIZE)) { + goto fail1; + } + if (data->hs_desc.bLength != USB_DT_ENDPOINT_SIZE + || data->hs_desc.bDescriptorType + != USB_DT_ENDPOINT) { + DBG(data->dev, "config %s, bad hs length or type\n", + data->name); + goto fail0; + } + } + value = len; + + spin_lock_irq (&data->dev->lock); + if (data->dev->state == STATE_DEV_UNBOUND) { + value = -ENOENT; + goto gone; + } else if ((ep = data->ep) == NULL) { + value = -ENODEV; + goto gone; + } + switch (data->dev->gadget->speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + value = usb_ep_enable (ep, &data->desc); + if (value == 0) + data->state = STATE_EP_ENABLED; + break; +#ifdef HIGHSPEED + case USB_SPEED_HIGH: + /* fails if caller didn't provide that descriptor... */ + value = usb_ep_enable (ep, &data->hs_desc); + if (value == 0) + data->state = STATE_EP_ENABLED; + break; +#endif + default: + DBG (data->dev, "unconnected, %s init deferred\n", + data->name); + data->state = STATE_EP_DEFER_ENABLE; + } + if (value == 0) + fd->f_op = &ep_io_operations; +gone: + spin_unlock_irq (&data->dev->lock); + if (value < 0) { +fail: + data->desc.bDescriptorType = 0; + data->hs_desc.bDescriptorType = 0; + } + up (&data->lock); + return value; +fail0: + value = -EINVAL; + goto fail; +fail1: + value = -EFAULT; + goto fail; +} + +static int +ep_open (struct inode *inode, struct file *fd) +{ + struct ep_data *data = inode->u.generic_ip; + int value = -EBUSY; + + if (down_interruptible (&data->lock) != 0) + return -EINTR; + spin_lock_irq (&data->dev->lock); + if (data->dev->state == STATE_DEV_UNBOUND) + value = -ENOENT; + else if (data->state == STATE_EP_DISABLED) { + value = 0; + data->state = STATE_EP_READY; + get_ep (data); + fd->private_data = data; + VDEBUG (data->dev, "%s ready\n", data->name); + } else + DBG (data->dev, "%s state %d\n", + data->name, data->state); + spin_unlock_irq (&data->dev->lock); + up (&data->lock); + return value; +} + +/* used before endpoint configuration */ +static struct file_operations ep_config_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + + .open = ep_open, + .write = ep_config, + .release = ep_release, +}; + +/*----------------------------------------------------------------------*/ + +/* EP0 IMPLEMENTATION can be partly in userspace. + * + * Drivers that use this facility receive various events, including + * control requests the kernel doesn't handle. Drivers that don't + * use this facility may be too simple-minded for real applications. + */ + +static inline void ep0_readable (struct dev_data *dev) +{ + wake_up (&dev->wait); + kill_fasync (&dev->fasync, SIGIO, POLL_IN); +} + +static void clean_req (struct usb_ep *ep, struct usb_request *req) +{ + struct dev_data *dev = ep->driver_data; + + if (req->buf != dev->rbuf) { + usb_ep_free_buffer (ep, req->buf, req->dma, req->length); + req->buf = dev->rbuf; + req->dma = DMA_ADDR_INVALID; + } + req->complete = epio_complete; + dev->setup_out_ready = 0; +} + +static void ep0_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct dev_data *dev = ep->driver_data; + int free = 1; + + /* for control OUT, data must still get to userspace */ + if (!dev->setup_in) { + dev->setup_out_error = (req->status != 0); + if (!dev->setup_out_error) + free = 0; + dev->setup_out_ready = 1; + ep0_readable (dev); + } else if (dev->state == STATE_SETUP) + dev->state = STATE_CONNECTED; + + /* clean up as appropriate */ + if (free && req->buf != &dev->rbuf) + clean_req (ep, req); + req->complete = epio_complete; +} + +static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len) +{ + struct dev_data *dev = ep->driver_data; + + if (dev->setup_out_ready) { + DBG (dev, "ep0 request busy!\n"); + return -EBUSY; + } + if (len > sizeof (dev->rbuf)) + req->buf = usb_ep_alloc_buffer (ep, len, &req->dma, GFP_ATOMIC); + if (req->buf == 0) { + req->buf = dev->rbuf; + return -ENOMEM; + } + req->complete = ep0_complete; + req->length = len; + return 0; +} + +static ssize_t +ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) +{ + struct dev_data *dev = fd->private_data; + ssize_t retval; + enum ep0_state state; + + spin_lock_irq (&dev->lock); + + /* report fd mode change before acting on it */ + if (dev->setup_abort) { + dev->setup_abort = 0; + retval = -EIDRM; + goto done; + } + + /* control DATA stage */ + if ((state = dev->state) == STATE_SETUP) { + + if (dev->setup_in) { /* stall IN */ + VDEBUG(dev, "ep0in stall\n"); + (void) usb_ep_set_halt (dev->gadget->ep0); + retval = -EL2HLT; + dev->state = STATE_CONNECTED; + + } else if (len == 0) { /* ack SET_CONFIGURATION etc */ + struct usb_ep *ep = dev->gadget->ep0; + struct usb_request *req = dev->req; + + if ((retval = setup_req (ep, req, 0)) == 0) + retval = usb_ep_queue (ep, req, GFP_ATOMIC); + dev->state = STATE_CONNECTED; + + /* assume that was SET_CONFIGURATION */ + if (dev->current_config) { + unsigned power; +#ifdef HIGHSPEED + if (dev->gadget->speed == USB_SPEED_HIGH) + power = dev->hs_config->bMaxPower; + else +#endif + power = dev->config->bMaxPower; + usb_gadget_vbus_draw(dev->gadget, 2 * power); + } + + } else { /* collect OUT data */ + if ((fd->f_flags & O_NONBLOCK) != 0 + && !dev->setup_out_ready) { + retval = -EAGAIN; + goto done; + } + spin_unlock_irq (&dev->lock); + retval = wait_event_interruptible (dev->wait, + dev->setup_out_ready != 0); + + /* FIXME state could change from under us */ + spin_lock_irq (&dev->lock); + if (retval) + goto done; + if (dev->setup_out_error) + retval = -EIO; + else { + len = min (len, (size_t)dev->req->actual); +// FIXME don't call this with the spinlock held ... + if (copy_to_user (buf, &dev->req->buf, len)) + retval = -EFAULT; + clean_req (dev->gadget->ep0, dev->req); + /* NOTE userspace can't yet choose to stall */ + } + } + goto done; + } + + /* else normal: return event data */ + if (len < sizeof dev->event [0]) { + retval = -EINVAL; + goto done; + } + len -= len % sizeof (struct usb_gadgetfs_event); + dev->usermode_setup = 1; + +scan: + /* return queued events right away */ + if (dev->ev_next != 0) { + unsigned i, n; + int tmp = dev->ev_next; + + len = min (len, tmp * sizeof (struct usb_gadgetfs_event)); + n = len / sizeof (struct usb_gadgetfs_event); + + /* ep0 can't deliver events when STATE_SETUP */ + for (i = 0; i < n; i++) { + if (dev->event [i].type == GADGETFS_SETUP) { + len = n = i + 1; + len *= sizeof (struct usb_gadgetfs_event); + n = 0; + break; + } + } + spin_unlock_irq (&dev->lock); + if (copy_to_user (buf, &dev->event, len)) + retval = -EFAULT; + else + retval = len; + if (len > 0) { + len /= sizeof (struct usb_gadgetfs_event); + + /* NOTE this doesn't guard against broken drivers; + * concurrent ep0 readers may lose events. + */ + spin_lock_irq (&dev->lock); + dev->ev_next -= len; + if (dev->ev_next != 0) + memmove (&dev->event, &dev->event [len], + sizeof (struct usb_gadgetfs_event) + * (tmp - len)); + if (n == 0) + dev->state = STATE_SETUP; + spin_unlock_irq (&dev->lock); + } + return retval; + } + if (fd->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto done; + } + + switch (state) { + default: + DBG (dev, "fail %s, state %d\n", __FUNCTION__, state); + retval = -ESRCH; + break; + case STATE_UNCONNECTED: + case STATE_CONNECTED: + spin_unlock_irq (&dev->lock); + DBG (dev, "%s wait\n", __FUNCTION__); + + /* wait for events */ + retval = wait_event_interruptible (dev->wait, + dev->ev_next != 0); + if (retval < 0) + return retval; + spin_lock_irq (&dev->lock); + goto scan; + } + +done: + spin_unlock_irq (&dev->lock); + return retval; +} + +static struct usb_gadgetfs_event * +next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type) +{ + struct usb_gadgetfs_event *event; + unsigned i; + + switch (type) { + /* these events purge the queue */ + case GADGETFS_DISCONNECT: + if (dev->state == STATE_SETUP) + dev->setup_abort = 1; + // FALL THROUGH + case GADGETFS_CONNECT: + dev->ev_next = 0; + break; + case GADGETFS_SETUP: /* previous request timed out */ + case GADGETFS_SUSPEND: /* same effect */ + /* these events can't be repeated */ + for (i = 0; i != dev->ev_next; i++) { + if (dev->event [i].type != type) + continue; + DBG (dev, "discard old event %d\n", type); + dev->ev_next--; + if (i == dev->ev_next) + break; + /* indices start at zero, for simplicity */ + memmove (&dev->event [i], &dev->event [i + 1], + sizeof (struct usb_gadgetfs_event) + * (dev->ev_next - i)); + } + break; + default: + BUG (); + } + event = &dev->event [dev->ev_next++]; + BUG_ON (dev->ev_next > N_EVENT); + VDEBUG (dev, "ev %d, next %d\n", type, dev->ev_next); + memset (event, 0, sizeof *event); + event->type = type; + return event; +} + +static ssize_t +ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) +{ + struct dev_data *dev = fd->private_data; + ssize_t retval = -ESRCH; + + spin_lock_irq (&dev->lock); + + /* report fd mode change before acting on it */ + if (dev->setup_abort) { + dev->setup_abort = 0; + retval = -EIDRM; + + /* data and/or status stage for control request */ + } else if (dev->state == STATE_SETUP) { + + /* IN DATA+STATUS caller makes len <= wLength */ + if (dev->setup_in) { + retval = setup_req (dev->gadget->ep0, dev->req, len); + if (retval == 0) { + spin_unlock_irq (&dev->lock); + if (copy_from_user (dev->req->buf, buf, len)) + retval = -EFAULT; + else + retval = usb_ep_queue ( + dev->gadget->ep0, dev->req, + GFP_KERNEL); + if (retval < 0) { + spin_lock_irq (&dev->lock); + clean_req (dev->gadget->ep0, dev->req); + spin_unlock_irq (&dev->lock); + } else + retval = len; + + return retval; + } + + /* can stall some OUT transfers */ + } else if (dev->setup_can_stall) { + VDEBUG(dev, "ep0out stall\n"); + (void) usb_ep_set_halt (dev->gadget->ep0); + retval = -EL2HLT; + dev->state = STATE_CONNECTED; + } else { + DBG(dev, "bogus ep0out stall!\n"); + } + } else + DBG (dev, "fail %s, state %d\n", __FUNCTION__, dev->state); + + spin_unlock_irq (&dev->lock); + return retval; +} + +static int +ep0_fasync (int f, struct file *fd, int on) +{ + struct dev_data *dev = fd->private_data; + // caller must F_SETOWN before signal delivery happens + VDEBUG (dev, "%s %s\n", __FUNCTION__, on ? "on" : "off"); + return fasync_helper (f, fd, on, &dev->fasync); +} + +static struct usb_gadget_driver gadgetfs_driver; + +static int +dev_release (struct inode *inode, struct file *fd) +{ + struct dev_data *dev = fd->private_data; + + /* closing ep0 === shutdown all */ + + usb_gadget_unregister_driver (&gadgetfs_driver); + + /* at this point "good" hardware has disconnected the + * device from USB; the host won't see it any more. + * alternatively, all host requests will time out. + */ + + fasync_helper (-1, fd, 0, &dev->fasync); + kfree (dev->buf); + dev->buf = NULL; + put_dev (dev); + + /* other endpoints were all decoupled from this device */ + dev->state = STATE_DEV_DISABLED; + return 0; +} + +static int dev_ioctl (struct inode *inode, struct file *fd, + unsigned code, unsigned long value) +{ + struct dev_data *dev = fd->private_data; + struct usb_gadget *gadget = dev->gadget; + + if (gadget->ops->ioctl) + return gadget->ops->ioctl (gadget, code, value); + return -ENOTTY; +} + +/* used after device configuration */ +static struct file_operations ep0_io_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + + .read = ep0_read, + .write = ep0_write, + .fasync = ep0_fasync, + // .poll = ep0_poll, + .ioctl = dev_ioctl, + .release = dev_release, +}; + +/*----------------------------------------------------------------------*/ + +/* The in-kernel gadget driver handles most ep0 issues, in particular + * enumerating the single configuration (as provided from user space). + * + * Unrecognized ep0 requests may be handled in user space. + */ + +#ifdef HIGHSPEED +static void make_qualifier (struct dev_data *dev) +{ + struct usb_qualifier_descriptor qual; + struct usb_device_descriptor *desc; + + qual.bLength = sizeof qual; + qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER; + qual.bcdUSB = __constant_cpu_to_le16 (0x0200); + + desc = dev->dev; + qual.bDeviceClass = desc->bDeviceClass; + qual.bDeviceSubClass = desc->bDeviceSubClass; + qual.bDeviceProtocol = desc->bDeviceProtocol; + + /* assumes ep0 uses the same value for both speeds ... */ + qual.bMaxPacketSize0 = desc->bMaxPacketSize0; + + qual.bNumConfigurations = 1; + qual.bRESERVED = 0; + + memcpy (dev->rbuf, &qual, sizeof qual); +} +#endif + +static int +config_buf (struct dev_data *dev, u8 type, unsigned index) +{ + int len; +#ifdef HIGHSPEED + int hs; +#endif + + /* only one configuration */ + if (index > 0) + return -EINVAL; + +#ifdef HIGHSPEED + hs = (dev->gadget->speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; + if (hs) { + dev->req->buf = dev->hs_config; + len = le16_to_cpup (&dev->hs_config->wTotalLength); + } else +#endif + { + dev->req->buf = dev->config; + len = le16_to_cpup (&dev->config->wTotalLength); + } + ((u8 *)dev->req->buf) [1] = type; + return len; +} + +static int +gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +{ + struct dev_data *dev = get_gadget_data (gadget); + struct usb_request *req = dev->req; + int value = -EOPNOTSUPP; + struct usb_gadgetfs_event *event; + u16 w_value = ctrl->wValue; + u16 w_length = ctrl->wLength; + + spin_lock (&dev->lock); + dev->setup_abort = 0; + if (dev->state == STATE_UNCONNECTED) { + struct usb_ep *ep; + struct ep_data *data; + + dev->state = STATE_CONNECTED; + dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket; + +#ifdef HIGHSPEED + if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) { + ERROR (dev, "no high speed config??\n"); + return -EINVAL; + } +#endif /* HIGHSPEED */ + + INFO (dev, "connected\n"); + event = next_event (dev, GADGETFS_CONNECT); + event->u.speed = gadget->speed; + ep0_readable (dev); + + list_for_each_entry (ep, &gadget->ep_list, ep_list) { + data = ep->driver_data; + /* ... down_trylock (&data->lock) ... */ + if (data->state != STATE_EP_DEFER_ENABLE) + continue; +#ifdef HIGHSPEED + if (gadget->speed == USB_SPEED_HIGH) + value = usb_ep_enable (ep, &data->hs_desc); + else +#endif /* HIGHSPEED */ + value = usb_ep_enable (ep, &data->desc); + if (value) { + ERROR (dev, "deferred %s enable --> %d\n", + data->name, value); + continue; + } + data->state = STATE_EP_ENABLED; + wake_up (&data->wait); + DBG (dev, "woke up %s waiters\n", data->name); + } + + /* host may have given up waiting for response. we can miss control + * requests handled lower down (device/endpoint status and features); + * then ep0_{read,write} will report the wrong status. controller + * driver will have aborted pending i/o. + */ + } else if (dev->state == STATE_SETUP) + dev->setup_abort = 1; + + req->buf = dev->rbuf; + req->dma = DMA_ADDR_INVALID; + req->context = NULL; + value = -EOPNOTSUPP; + switch (ctrl->bRequest) { + + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != USB_DIR_IN) + goto unrecognized; + switch (w_value >> 8) { + + case USB_DT_DEVICE: + value = min (w_length, (u16) sizeof *dev->dev); + req->buf = dev->dev; + break; +#ifdef HIGHSPEED + case USB_DT_DEVICE_QUALIFIER: + if (!dev->hs_config) + break; + value = min (w_length, (u16) + sizeof (struct usb_qualifier_descriptor)); + make_qualifier (dev); + break; + case USB_DT_OTHER_SPEED_CONFIG: + // FALLTHROUGH +#endif + case USB_DT_CONFIG: + value = config_buf (dev, + w_value >> 8, + w_value & 0xff); + if (value >= 0) + value = min (w_length, (u16) value); + break; + case USB_DT_STRING: + goto unrecognized; + + default: // all others are errors + break; + } + break; + + /* currently one config, two speeds */ + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) + break; + if (0 == (u8) w_value) { + value = 0; + dev->current_config = 0; + usb_gadget_vbus_draw(gadget, 8 /* mA */ ); + // user mode expected to disable endpoints + } else { + u8 config, power; +#ifdef HIGHSPEED + if (gadget->speed == USB_SPEED_HIGH) { + config = dev->hs_config->bConfigurationValue; + power = dev->hs_config->bMaxPower; + } else +#endif + { + config = dev->config->bConfigurationValue; + power = dev->config->bMaxPower; + } + + if (config == (u8) w_value) { + value = 0; + dev->current_config = config; + usb_gadget_vbus_draw(gadget, 2 * power); + } + } + + /* report SET_CONFIGURATION like any other control request, + * except that usermode may not stall this. the next + * request mustn't be allowed start until this finishes: + * endpoints and threads set up, etc. + * + * NOTE: older PXA hardware (before PXA 255: without UDCCFR) + * has bad/racey automagic that prevents synchronizing here. + * even kernel mode drivers often miss them. + */ + if (value == 0) { + INFO (dev, "configuration #%d\n", dev->current_config); + if (dev->usermode_setup) { + dev->setup_can_stall = 0; + goto delegate; + } + } + break; + +#ifndef CONFIG_USB_GADGETFS_PXA2XX + /* PXA automagically handles this request too */ + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != 0x80) + break; + *(u8 *)req->buf = dev->current_config; + value = min (w_length, (u16) 1); + break; +#endif + + default: +unrecognized: + VDEBUG (dev, "%s req%02x.%02x v%04x i%04x l%d\n", + dev->usermode_setup ? "delegate" : "fail", + ctrl->bRequestType, ctrl->bRequest, + w_value, le16_to_cpu(ctrl->wIndex), w_length); + + /* if there's an ep0 reader, don't stall */ + if (dev->usermode_setup) { + dev->setup_can_stall = 1; +delegate: + dev->setup_in = (ctrl->bRequestType & USB_DIR_IN) + ? 1 : 0; + dev->setup_out_ready = 0; + dev->setup_out_error = 0; + value = 0; + + /* read DATA stage for OUT right away */ + if (unlikely (!dev->setup_in && w_length)) { + value = setup_req (gadget->ep0, dev->req, + w_length); + if (value < 0) + break; + value = usb_ep_queue (gadget->ep0, dev->req, + GFP_ATOMIC); + if (value < 0) { + clean_req (gadget->ep0, dev->req); + break; + } + + /* we can't currently stall these */ + dev->setup_can_stall = 0; + } + + /* state changes when reader collects event */ + event = next_event (dev, GADGETFS_SETUP); + event->u.setup = *ctrl; + ep0_readable (dev); + spin_unlock (&dev->lock); + return 0; + } + } + + /* proceed with data transfer and status phases? */ + if (value >= 0 && dev->state != STATE_SETUP) { + req->length = value; + req->zero = value < w_length; + value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG (dev, "ep_queue --> %d\n", value); + req->status = 0; + } + } + + /* device stalls when value < 0 */ + spin_unlock (&dev->lock); + return value; +} + +static void destroy_ep_files (struct dev_data *dev) +{ + struct list_head *entry, *tmp; + + DBG (dev, "%s %d\n", __FUNCTION__, dev->state); + + /* dev->state must prevent interference */ +restart: + spin_lock_irq (&dev->lock); + list_for_each_safe (entry, tmp, &dev->epfiles) { + struct ep_data *ep; + struct inode *parent; + struct dentry *dentry; + + /* break link to FS */ + ep = list_entry (entry, struct ep_data, epfiles); + list_del_init (&ep->epfiles); + dentry = ep->dentry; + ep->dentry = NULL; + parent = dentry->d_parent->d_inode; + + /* break link to controller */ + if (ep->state == STATE_EP_ENABLED) + (void) usb_ep_disable (ep->ep); + ep->state = STATE_EP_UNBOUND; + usb_ep_free_request (ep->ep, ep->req); + ep->ep = NULL; + wake_up (&ep->wait); + put_ep (ep); + + spin_unlock_irq (&dev->lock); + + /* break link to dcache */ + down (&parent->i_sem); + d_delete (dentry); + dput (dentry); + up (&parent->i_sem); + + /* fds may still be open */ + goto restart; + } + spin_unlock_irq (&dev->lock); +} + + +static struct inode * +gadgetfs_create_file (struct super_block *sb, char const *name, + void *data, struct file_operations *fops, + struct dentry **dentry_p); + +static int activate_ep_files (struct dev_data *dev) +{ + struct usb_ep *ep; + + gadget_for_each_ep (ep, dev->gadget) { + struct ep_data *data; + + data = kmalloc (sizeof *data, GFP_KERNEL); + if (!data) + goto enomem; + memset (data, 0, sizeof data); + data->state = STATE_EP_DISABLED; + init_MUTEX (&data->lock); + init_waitqueue_head (&data->wait); + + strncpy (data->name, ep->name, sizeof (data->name) - 1); + atomic_set (&data->count, 1); + data->dev = dev; + get_dev (dev); + + data->ep = ep; + ep->driver_data = data; + + data->req = usb_ep_alloc_request (ep, GFP_KERNEL); + if (!data->req) + goto enomem; + + data->inode = gadgetfs_create_file (dev->sb, data->name, + data, &ep_config_operations, + &data->dentry); + if (!data->inode) { + kfree (data); + goto enomem; + } + list_add_tail (&data->epfiles, &dev->epfiles); + } + return 0; + +enomem: + DBG (dev, "%s enomem\n", __FUNCTION__); + destroy_ep_files (dev); + return -ENOMEM; +} + +static void +gadgetfs_unbind (struct usb_gadget *gadget) +{ + struct dev_data *dev = get_gadget_data (gadget); + + DBG (dev, "%s\n", __FUNCTION__); + + spin_lock_irq (&dev->lock); + dev->state = STATE_DEV_UNBOUND; + spin_unlock_irq (&dev->lock); + + destroy_ep_files (dev); + gadget->ep0->driver_data = NULL; + set_gadget_data (gadget, NULL); + + /* we've already been disconnected ... no i/o is active */ + if (dev->req) + usb_ep_free_request (gadget->ep0, dev->req); + DBG (dev, "%s done\n", __FUNCTION__); + put_dev (dev); +} + +static struct dev_data *the_device; + +static int +gadgetfs_bind (struct usb_gadget *gadget) +{ + struct dev_data *dev = the_device; + + if (!dev) + return -ESRCH; + if (0 != strcmp (CHIP, gadget->name)) { + printk (KERN_ERR "%s expected %s controller not %s\n", + shortname, CHIP, gadget->name); + return -ENODEV; + } + + set_gadget_data (gadget, dev); + dev->gadget = gadget; + gadget->ep0->driver_data = dev; + dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket; + + /* preallocate control response and buffer */ + dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); + if (!dev->req) + goto enomem; + dev->req->context = NULL; + dev->req->complete = epio_complete; + + if (activate_ep_files (dev) < 0) + goto enomem; + + INFO (dev, "bound to %s driver\n", gadget->name); + dev->state = STATE_UNCONNECTED; + get_dev (dev); + return 0; + +enomem: + gadgetfs_unbind (gadget); + return -ENOMEM; +} + +static void +gadgetfs_disconnect (struct usb_gadget *gadget) +{ + struct dev_data *dev = get_gadget_data (gadget); + + if (dev->state == STATE_UNCONNECTED) { + DBG (dev, "already unconnected\n"); + return; + } + dev->state = STATE_UNCONNECTED; + + INFO (dev, "disconnected\n"); + spin_lock (&dev->lock); + next_event (dev, GADGETFS_DISCONNECT); + ep0_readable (dev); + spin_unlock (&dev->lock); +} + +static void +gadgetfs_suspend (struct usb_gadget *gadget) +{ + struct dev_data *dev = get_gadget_data (gadget); + + INFO (dev, "suspended from state %d\n", dev->state); + spin_lock (&dev->lock); + switch (dev->state) { + case STATE_SETUP: // VERY odd... host died?? + case STATE_CONNECTED: + case STATE_UNCONNECTED: + next_event (dev, GADGETFS_SUSPEND); + ep0_readable (dev); + /* FALLTHROUGH */ + default: + break; + } + spin_unlock (&dev->lock); +} + +static struct usb_gadget_driver gadgetfs_driver = { +#ifdef HIGHSPEED + .speed = USB_SPEED_HIGH, +#else + .speed = USB_SPEED_FULL, +#endif + .function = (char *) driver_desc, + .bind = gadgetfs_bind, + .unbind = gadgetfs_unbind, + .setup = gadgetfs_setup, + .disconnect = gadgetfs_disconnect, + .suspend = gadgetfs_suspend, + + .driver = { + .name = (char *) shortname, + // .shutdown = ... + // .suspend = ... + // .resume = ... + }, +}; + +/*----------------------------------------------------------------------*/ + +static void gadgetfs_nop(struct usb_gadget *arg) { } + +static int gadgetfs_probe (struct usb_gadget *gadget) +{ + CHIP = gadget->name; + return -EISNAM; +} + +static struct usb_gadget_driver probe_driver = { + .speed = USB_SPEED_HIGH, + .bind = gadgetfs_probe, + .unbind = gadgetfs_nop, + .setup = (void *)gadgetfs_nop, + .disconnect = gadgetfs_nop, + .driver = { + .name = "nop", + }, +}; + + +/* DEVICE INITIALIZATION + * + * fd = open ("/dev/gadget/$CHIP", O_RDWR) + * status = write (fd, descriptors, sizeof descriptors) + * + * That write establishes the device configuration, so the kernel can + * bind to the controller ... guaranteeing it can handle enumeration + * at all necessary speeds. Descriptor order is: + * + * . message tag (u32, host order) ... for now, must be zero; it + * would change to support features like multi-config devices + * . full/low speed config ... all wTotalLength bytes (with interface, + * class, altsetting, endpoint, and other descriptors) + * . high speed config ... all descriptors, for high speed operation; + * this one's optional except for high-speed hardware + * . device descriptor + * + * Endpoints are not yet enabled. Drivers may want to immediately + * initialize them, using the /dev/gadget/ep* files that are available + * as soon as the kernel sees the configuration, or they can wait + * until device configuration and interface altsetting changes create + * the need to configure (or unconfigure) them. + * + * After initialization, the device stays active for as long as that + * $CHIP file is open. Events may then be read from that descriptor, + * such configuration notifications. More complex drivers will handle + * some control requests in user space. + */ + +static int is_valid_config (struct usb_config_descriptor *config) +{ + return config->bDescriptorType == USB_DT_CONFIG + && config->bLength == USB_DT_CONFIG_SIZE + && config->bConfigurationValue != 0 + && (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0 + && (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0; + /* FIXME if gadget->is_otg, _must_ include an otg descriptor */ + /* FIXME check lengths: walk to end */ +} + +static ssize_t +dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) +{ + struct dev_data *dev = fd->private_data; + ssize_t value = len, length = len; + unsigned total; + u32 tag; + char *kbuf; + + if (dev->state != STATE_OPENED) + return -EEXIST; + + if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) + return -EINVAL; + + /* we might need to change message format someday */ + if (copy_from_user (&tag, buf, 4)) + return -EFAULT; + if (tag != 0) + return -EINVAL; + buf += 4; + length -= 4; + + kbuf = kmalloc (length, SLAB_KERNEL); + if (!kbuf) + return -ENOMEM; + if (copy_from_user (kbuf, buf, length)) { + kfree (kbuf); + return -EFAULT; + } + + spin_lock_irq (&dev->lock); + value = -EINVAL; + if (dev->buf) + goto fail; + dev->buf = kbuf; + + /* full or low speed config */ + dev->config = (void *) kbuf; + total = le16_to_cpup (&dev->config->wTotalLength); + if (!is_valid_config (dev->config) || total >= length) + goto fail; + kbuf += total; + length -= total; + + /* optional high speed config */ + if (kbuf [1] == USB_DT_CONFIG) { + dev->hs_config = (void *) kbuf; + total = le16_to_cpup (&dev->hs_config->wTotalLength); + if (!is_valid_config (dev->hs_config) || total >= length) + goto fail; + kbuf += total; + length -= total; + } + + /* could support multiple configs, using another encoding! */ + + /* device descriptor (tweaked for paranoia) */ + if (length != USB_DT_DEVICE_SIZE) + goto fail; + dev->dev = (void *)kbuf; + if (dev->dev->bLength != USB_DT_DEVICE_SIZE + || dev->dev->bDescriptorType != USB_DT_DEVICE + || dev->dev->bNumConfigurations != 1) + goto fail; + dev->dev->bNumConfigurations = 1; + dev->dev->bcdUSB = __constant_cpu_to_le16 (0x0200); + + /* triggers gadgetfs_bind(); then we can enumerate. */ + spin_unlock_irq (&dev->lock); + value = usb_gadget_register_driver (&gadgetfs_driver); + if (value != 0) { + kfree (dev->buf); + dev->buf = NULL; + } else { + /* at this point "good" hardware has for the first time + * let the USB the host see us. alternatively, if users + * unplug/replug that will clear all the error state. + * + * note: everything running before here was guaranteed + * to choke driver model style diagnostics. from here + * on, they can work ... except in cleanup paths that + * kick in after the ep0 descriptor is closed. + */ + fd->f_op = &ep0_io_operations; + value = len; + } + return value; + +fail: + spin_unlock_irq (&dev->lock); + pr_debug ("%s: %s fail %Zd, %p\n", shortname, __FUNCTION__, value, dev); + kfree (dev->buf); + dev->buf = NULL; + return value; +} + +static int +dev_open (struct inode *inode, struct file *fd) +{ + struct dev_data *dev = inode->u.generic_ip; + int value = -EBUSY; + + if (dev->state == STATE_DEV_DISABLED) { + dev->ev_next = 0; + dev->state = STATE_OPENED; + fd->private_data = dev; + get_dev (dev); + value = 0; + } + return value; +} + +static struct file_operations dev_init_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + + .open = dev_open, + .write = dev_config, + .fasync = ep0_fasync, + .ioctl = dev_ioctl, + .release = dev_release, +}; + +/*----------------------------------------------------------------------*/ + +/* FILESYSTEM AND SUPERBLOCK OPERATIONS + * + * Mounting the filesystem creates a controller file, used first for + * device configuration then later for event monitoring. + */ + + +/* FIXME PAM etc could set this security policy without mount options + * if epfiles inherited ownership and permissons from ep0 ... + */ + +static unsigned default_uid; +static unsigned default_gid; +static unsigned default_perm = S_IRUSR | S_IWUSR; + +module_param (default_uid, uint, 0644); +module_param (default_gid, uint, 0644); +module_param (default_perm, uint, 0644); + + +static struct inode * +gadgetfs_make_inode (struct super_block *sb, + void *data, struct file_operations *fops, + int mode) +{ + struct inode *inode = new_inode (sb); + + if (inode) { + inode->i_mode = mode; + inode->i_uid = default_uid; + inode->i_gid = default_gid; + inode->i_blksize = PAGE_CACHE_SIZE; + inode->i_blocks = 0; + inode->i_atime = inode->i_mtime = inode->i_ctime + = CURRENT_TIME; + inode->u.generic_ip = data; + inode->i_fop = fops; + } + return inode; +} + +/* creates in fs root directory, so non-renamable and non-linkable. + * so inode and dentry are paired, until device reconfig. + */ +static struct inode * +gadgetfs_create_file (struct super_block *sb, char const *name, + void *data, struct file_operations *fops, + struct dentry **dentry_p) +{ + struct dentry *dentry; + struct inode *inode; + + dentry = d_alloc_name(sb->s_root, name); + if (!dentry) + return NULL; + + inode = gadgetfs_make_inode (sb, data, fops, + S_IFREG | (default_perm & S_IRWXUGO)); + if (!inode) { + dput(dentry); + return NULL; + } + d_add (dentry, inode); + *dentry_p = dentry; + return inode; +} + +static struct super_operations gadget_fs_operations = { + .statfs = simple_statfs, + .drop_inode = generic_delete_inode, +}; + +static int +gadgetfs_fill_super (struct super_block *sb, void *opts, int silent) +{ + struct inode *inode; + struct dentry *d; + struct dev_data *dev; + + if (the_device) + return -ESRCH; + + /* fake probe to determine $CHIP */ + (void) usb_gadget_register_driver (&probe_driver); + if (!CHIP) + return -ENODEV; + + /* superblock */ + sb->s_blocksize = PAGE_CACHE_SIZE; + sb->s_blocksize_bits = PAGE_CACHE_SHIFT; + sb->s_magic = GADGETFS_MAGIC; + sb->s_op = &gadget_fs_operations; + sb->s_time_gran = 1; + + /* root inode */ + inode = gadgetfs_make_inode (sb, + NULL, &simple_dir_operations, + S_IFDIR | S_IRUGO | S_IXUGO); + if (!inode) + return -ENOMEM; + inode->i_op = &simple_dir_inode_operations; + if (!(d = d_alloc_root (inode))) { + iput (inode); + return -ENOMEM; + } + sb->s_root = d; + + /* the ep0 file is named after the controller we expect; + * user mode code can use it for sanity checks, like we do. + */ + dev = dev_new (); + if (!dev) + return -ENOMEM; + + dev->sb = sb; + if (!(inode = gadgetfs_create_file (sb, CHIP, + dev, &dev_init_operations, + &dev->dentry))) { + put_dev(dev); + return -ENOMEM; + } + + /* other endpoint files are available after hardware setup, + * from binding to a controller. + */ + the_device = dev; + return 0; +} + +/* "mount -t gadgetfs path /dev/gadget" ends up here */ +static struct super_block * +gadgetfs_get_sb (struct file_system_type *t, int flags, + const char *path, void *opts) +{ + return get_sb_single (t, flags, opts, gadgetfs_fill_super); +} + +static void +gadgetfs_kill_sb (struct super_block *sb) +{ + kill_litter_super (sb); + if (the_device) { + put_dev (the_device); + the_device = NULL; + } +} + +/*----------------------------------------------------------------------*/ + +static struct file_system_type gadgetfs_type = { + .owner = THIS_MODULE, + .name = shortname, + .get_sb = gadgetfs_get_sb, + .kill_sb = gadgetfs_kill_sb, +}; + +/*----------------------------------------------------------------------*/ + +static int __init init (void) +{ + int status; + + status = register_filesystem (&gadgetfs_type); + if (status == 0) + pr_info ("%s: %s, version " DRIVER_VERSION "\n", + shortname, driver_desc); + return status; +} +module_init (init); + +static void __exit cleanup (void) +{ + pr_debug ("unregister %s\n", shortname); + unregister_filesystem (&gadgetfs_type); +} +module_exit (cleanup); + diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c new file mode 100644 index 0000000..0def9f7 --- /dev/null +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -0,0 +1,2167 @@ +/* + * linux/drivers/usb/gadget/lh7a40x_udc.c + * Sharp LH7A40x on-chip full speed USB device controllers + * + * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID + * Copyright (C) 2004 Bo Henriksen, Nordic ID + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include "lh7a40x_udc.h" + +//#define DEBUG printk +//#define DEBUG_EP0 printk +//#define DEBUG_SETUP printk + +#ifndef DEBUG_EP0 +# define DEBUG_EP0(fmt,args...) +#endif +#ifndef DEBUG_SETUP +# define DEBUG_SETUP(fmt,args...) +#endif +#ifndef DEBUG +# define NO_STATES +# define DEBUG(fmt,args...) +#endif + +#define DRIVER_DESC "LH7A40x USB Device Controller" +#define DRIVER_VERSION __DATE__ + +#ifndef _BIT /* FIXME - what happended to _BIT in 2.6.7bk18? */ +#define _BIT(x) (1<<(x)) +#endif + +struct lh7a40x_udc *the_controller; + +static const char driver_name[] = "lh7a40x_udc"; +static const char driver_desc[] = DRIVER_DESC; +static const char ep0name[] = "ep0-control"; + +/* + Local definintions. +*/ + +#ifndef NO_STATES +static char *state_names[] = { + "WAIT_FOR_SETUP", + "DATA_STATE_XMIT", + "DATA_STATE_NEED_ZLP", + "WAIT_FOR_OUT_STATUS", + "DATA_STATE_RECV" +}; +#endif + +/* + Local declarations. +*/ +static int lh7a40x_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *); +static int lh7a40x_ep_disable(struct usb_ep *ep); +static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, int); +static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *); +static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned, dma_addr_t *, + int); +static void lh7a40x_free_buffer(struct usb_ep *ep, void *, dma_addr_t, + unsigned); +static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, int); +static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *); +static int lh7a40x_set_halt(struct usb_ep *ep, int); +static int lh7a40x_fifo_status(struct usb_ep *ep); +static int lh7a40x_fifo_status(struct usb_ep *ep); +static void lh7a40x_fifo_flush(struct usb_ep *ep); +static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep); +static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr); + +static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, + int status); +static void pio_irq_enable(int bEndpointAddress); +static void pio_irq_disable(int bEndpointAddress); +static void stop_activity(struct lh7a40x_udc *dev, + struct usb_gadget_driver *driver); +static void flush(struct lh7a40x_ep *ep); +static void udc_enable(struct lh7a40x_udc *dev); +static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address); + +static struct usb_ep_ops lh7a40x_ep_ops = { + .enable = lh7a40x_ep_enable, + .disable = lh7a40x_ep_disable, + + .alloc_request = lh7a40x_alloc_request, + .free_request = lh7a40x_free_request, + + .alloc_buffer = lh7a40x_alloc_buffer, + .free_buffer = lh7a40x_free_buffer, + + .queue = lh7a40x_queue, + .dequeue = lh7a40x_dequeue, + + .set_halt = lh7a40x_set_halt, + .fifo_status = lh7a40x_fifo_status, + .fifo_flush = lh7a40x_fifo_flush, +}; + +/* Inline code */ + +static __inline__ int write_packet(struct lh7a40x_ep *ep, + struct lh7a40x_request *req, int max) +{ + u8 *buf; + int length, count; + volatile u32 *fifo = (volatile u32 *)ep->fifo; + + buf = req->req.buf + req->req.actual; + prefetch(buf); + + length = req->req.length - req->req.actual; + length = min(length, max); + req->req.actual += length; + + DEBUG("Write %d (max %d), fifo %p\n", length, max, fifo); + + count = length; + while (count--) { + *fifo = *buf++; + } + + return length; +} + +static __inline__ void usb_set_index(u32 ep) +{ + *(volatile u32 *)io_p2v(USB_INDEX) = ep; +} + +static __inline__ u32 usb_read(u32 port) +{ + return *(volatile u32 *)io_p2v(port); +} + +static __inline__ void usb_write(u32 val, u32 port) +{ + *(volatile u32 *)io_p2v(port) = val; +} + +static __inline__ void usb_set(u32 val, u32 port) +{ + volatile u32 *ioport = (volatile u32 *)io_p2v(port); + u32 after = (*ioport) | val; + *ioport = after; +} + +static __inline__ void usb_clear(u32 val, u32 port) +{ + volatile u32 *ioport = (volatile u32 *)io_p2v(port); + u32 after = (*ioport) & ~val; + *ioport = after; +} + +/*-------------------------------------------------------------------------*/ + +#define GPIO_PORTC_DR (0x80000E08) +#define GPIO_PORTC_DDR (0x80000E18) +#define GPIO_PORTC_PDR (0x80000E70) + +/* get port C pin data register */ +#define get_portc_pdr(bit) ((usb_read(GPIO_PORTC_PDR) & _BIT(bit)) != 0) +/* get port C data direction register */ +#define get_portc_ddr(bit) ((usb_read(GPIO_PORTC_DDR) & _BIT(bit)) != 0) +/* set port C data register */ +#define set_portc_dr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DR) : usb_clear(_BIT(bit), GPIO_PORTC_DR)) +/* set port C data direction register */ +#define set_portc_ddr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DDR) : usb_clear(_BIT(bit), GPIO_PORTC_DDR)) + +/* + * LPD7A404 GPIO's: + * Port C bit 1 = USB Port 1 Power Enable + * Port C bit 2 = USB Port 1 Data Carrier Detect + */ +#define is_usb_connected() get_portc_pdr(2) + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static const char proc_node_name[] = "driver/udc"; + +static int +udc_proc_read(char *page, char **start, off_t off, int count, + int *eof, void *_dev) +{ + char *buf = page; + struct lh7a40x_udc *dev = _dev; + char *next = buf; + unsigned size = count; + unsigned long flags; + int t; + + if (off != 0) + return 0; + + local_irq_save(flags); + + /* basic device status */ + t = scnprintf(next, size, + DRIVER_DESC "\n" + "%s version: %s\n" + "Gadget driver: %s\n" + "Host: %s\n\n", + driver_name, DRIVER_VERSION, + dev->driver ? dev->driver->driver.name : "(none)", + is_usb_connected()? "full speed" : "disconnected"); + size -= t; + next += t; + + t = scnprintf(next, size, + "GPIO:\n" + " Port C bit 1: %d, dir %d\n" + " Port C bit 2: %d, dir %d\n\n", + get_portc_pdr(1), get_portc_ddr(1), + get_portc_pdr(2), get_portc_ddr(2) + ); + size -= t; + next += t; + + t = scnprintf(next, size, + "DCP pullup: %d\n\n", + (usb_read(USB_PM) & PM_USB_DCP) != 0); + size -= t; + next += t; + + local_irq_restore(flags); + *eof = 1; + return count - size; +} + +#define create_proc_files() create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev) +#define remove_proc_files() remove_proc_entry(proc_node_name, NULL) + +#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +#define create_proc_files() do {} while (0) +#define remove_proc_files() do {} while (0) + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/* + * udc_disable - disable USB device controller + */ +static void udc_disable(struct lh7a40x_udc *dev) +{ + DEBUG("%s, %p\n", __FUNCTION__, dev); + + udc_set_address(dev, 0); + + /* Disable interrupts */ + usb_write(0, USB_IN_INT_EN); + usb_write(0, USB_OUT_INT_EN); + usb_write(0, USB_INT_EN); + + /* Disable the USB */ + usb_write(0, USB_PM); + +#ifdef CONFIG_ARCH_LH7A404 + /* Disable USB power */ + set_portc_dr(1, 0); +#endif + + /* if hardware supports it, disconnect from usb */ + /* make_usb_disappear(); */ + + dev->ep0state = WAIT_FOR_SETUP; + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->usb_address = 0; +} + +/* + * udc_reinit - initialize software state + */ +static void udc_reinit(struct lh7a40x_udc *dev) +{ + u32 i; + + DEBUG("%s, %p\n", __FUNCTION__, dev); + + /* device/ep0 records init */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + dev->ep0state = WAIT_FOR_SETUP; + + /* basic endpoint records init */ + for (i = 0; i < UDC_MAX_ENDPOINTS; i++) { + struct lh7a40x_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->desc = 0; + ep->stopped = 0; + INIT_LIST_HEAD(&ep->queue); + ep->pio_irqs = 0; + } + + /* the rest was statically initialized, and is read-only */ +} + +#define BYTES2MAXP(x) (x / 8) +#define MAXP2BYTES(x) (x * 8) + +/* until it's enabled, this UDC should be completely invisible + * to any USB host. + */ +static void udc_enable(struct lh7a40x_udc *dev) +{ + int ep; + + DEBUG("%s, %p\n", __FUNCTION__, dev); + + dev->gadget.speed = USB_SPEED_UNKNOWN; + +#ifdef CONFIG_ARCH_LH7A404 + /* Set Port C bit 1 & 2 as output */ + set_portc_ddr(1, 1); + set_portc_ddr(2, 1); + + /* Enable USB power */ + set_portc_dr(1, 0); +#endif + + /* + * C.f Chapter 18.1.3.1 Initializing the USB + */ + + /* Disable the USB */ + usb_clear(PM_USB_ENABLE, USB_PM); + + /* Reset APB & I/O sides of the USB */ + usb_set(USB_RESET_APB | USB_RESET_IO, USB_RESET); + mdelay(5); + usb_clear(USB_RESET_APB | USB_RESET_IO, USB_RESET); + + /* Set MAXP values for each */ + for (ep = 0; ep < UDC_MAX_ENDPOINTS; ep++) { + struct lh7a40x_ep *ep_reg = &dev->ep[ep]; + u32 csr; + + usb_set_index(ep); + + switch (ep_reg->ep_type) { + case ep_bulk_in: + case ep_interrupt: + usb_clear(USB_IN_CSR2_USB_DMA_EN | USB_IN_CSR2_AUTO_SET, + ep_reg->csr2); + /* Fall through */ + case ep_control: + usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)), + USB_IN_MAXP); + break; + case ep_bulk_out: + usb_clear(USB_OUT_CSR2_USB_DMA_EN | + USB_OUT_CSR2_AUTO_CLR, ep_reg->csr2); + usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)), + USB_OUT_MAXP); + break; + } + + /* Read & Write CSR1, just in case */ + csr = usb_read(ep_reg->csr1); + usb_write(csr, ep_reg->csr1); + + flush(ep_reg); + } + + /* Disable interrupts */ + usb_write(0, USB_IN_INT_EN); + usb_write(0, USB_OUT_INT_EN); + usb_write(0, USB_INT_EN); + + /* Enable interrupts */ + usb_set(USB_IN_INT_EP0, USB_IN_INT_EN); + usb_set(USB_INT_RESET_INT | USB_INT_RESUME_INT, USB_INT_EN); + /* Dont enable rest of the interrupts */ + /* usb_set(USB_IN_INT_EP3 | USB_IN_INT_EP1 | USB_IN_INT_EP0, USB_IN_INT_EN); + usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); */ + + /* Enable SUSPEND */ + usb_set(PM_ENABLE_SUSPEND, USB_PM); + + /* Enable the USB */ + usb_set(PM_USB_ENABLE, USB_PM); + +#ifdef CONFIG_ARCH_LH7A404 + /* NOTE: DOES NOT WORK! */ + /* Let host detect UDC: + * Software must write a 0 to the PMR:DCP_CTRL bit to turn this + * transistor on and pull the USBDP pin HIGH. + */ + /* usb_clear(PM_USB_DCP, USB_PM); + usb_set(PM_USB_DCP, USB_PM); */ +#endif +} + +/* + Register entry point for the peripheral controller driver. +*/ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct lh7a40x_udc *dev = the_controller; + int retval; + + DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name); + + if (!driver + || driver->speed != USB_SPEED_FULL + || !driver->bind + || !driver->unbind || !driver->disconnect || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + /* first hook up the driver ... */ + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + + device_add(&dev->gadget.dev); + retval = driver->bind(&dev->gadget); + if (retval) { + printk("%s: bind to driver %s --> error %d\n", dev->gadget.name, + driver->driver.name, retval); + device_del(&dev->gadget.dev); + + dev->driver = 0; + dev->gadget.dev.driver = 0; + return retval; + } + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + * NOTE: this shouldn't power up until later. + */ + printk("%s: registered gadget driver '%s'\n", dev->gadget.name, + driver->driver.name); + + udc_enable(dev); + + return 0; +} + +EXPORT_SYMBOL(usb_gadget_register_driver); + +/* + Unregister entry point for the peripheral controller driver. +*/ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct lh7a40x_udc *dev = the_controller; + unsigned long flags; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + + spin_lock_irqsave(&dev->lock, flags); + dev->driver = 0; + stop_activity(dev, driver); + spin_unlock_irqrestore(&dev->lock, flags); + + driver->unbind(&dev->gadget); + device_del(&dev->gadget.dev); + + udc_disable(dev); + + DEBUG("unregistered gadget driver '%s'\n", driver->driver.name); + return 0; +} + +EXPORT_SYMBOL(usb_gadget_unregister_driver); + +/*-------------------------------------------------------------------------*/ + +/** Write request to FIFO (max write == maxp size) + * Return: 0 = still running, 1 = completed, negative = errno + * NOTE: INDEX register must be set for EP + */ +static int write_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req) +{ + u32 max; + u32 csr; + + max = le16_to_cpu(ep->desc->wMaxPacketSize); + + csr = usb_read(ep->csr1); + DEBUG("CSR: %x %d\n", csr, csr & USB_IN_CSR1_FIFO_NOT_EMPTY); + + if (!(csr & USB_IN_CSR1_FIFO_NOT_EMPTY)) { + unsigned count; + int is_last, is_short; + + count = write_packet(ep, req, max); + usb_set(USB_IN_CSR1_IN_PKT_RDY, ep->csr1); + + /* last packet is usually short (or a zlp) */ + if (unlikely(count != max)) + is_last = is_short = 1; + else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely(max < ep_maxpacket(ep)); + } + + DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__, + ep->ep.name, count, + is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, req); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done(ep, req, 0); + if (list_empty(&ep->queue)) { + pio_irq_disable(ep_index(ep)); + } + return 1; + } + } else { + DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep)); + } + + return 0; +} + +/** Read to request from FIFO (max read == bytes in fifo) + * Return: 0 = still running, 1 = completed, negative = errno + * NOTE: INDEX register must be set for EP + */ +static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req) +{ + u32 csr; + u8 *buf; + unsigned bufferspace, count, is_short; + volatile u32 *fifo = (volatile u32 *)ep->fifo; + + /* make sure there's a packet in the FIFO. */ + csr = usb_read(ep->csr1); + if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) { + DEBUG("%s: Packet NOT ready!\n", __FUNCTION__); + return -EINVAL; + } + + buf = req->req.buf + req->req.actual; + prefetchw(buf); + bufferspace = req->req.length - req->req.actual; + + /* read all bytes from this packet */ + count = usb_read(USB_OUT_FIFO_WC1); + req->req.actual += min(count, bufferspace); + + is_short = (count < ep->ep.maxpacket); + DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, csr, count, + is_short ? "/S" : "", req, req->req.actual, req->req.length); + + while (likely(count-- != 0)) { + u8 byte = (u8) (*fifo & 0xff); + + if (unlikely(bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + printk("%s overflow %d\n", ep->ep.name, count); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + + usb_clear(USB_OUT_CSR1_OUT_PKT_RDY, ep->csr1); + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done(ep, req, 0); + usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); + + if (list_empty(&ep->queue)) + pio_irq_disable(ep_index(ep)); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +/* + * done - retire a request; caller blocked irqs + * INDEX register is preserved to keep same + */ +static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status) +{ + unsigned int stopped = ep->stopped; + u32 index; + + DEBUG("%s, %p\n", __FUNCTION__, ep); + list_del_init(&req->queue); + + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + DEBUG("complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + /* Read current index (completion may modify it) */ + index = usb_read(USB_INDEX); + + spin_unlock(&ep->dev->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&ep->dev->lock); + + /* Restore index */ + usb_set_index(index); + ep->stopped = stopped; +} + +/** Enable EP interrupt */ +static void pio_irq_enable(int ep) +{ + DEBUG("%s: %d\n", __FUNCTION__, ep); + + switch (ep) { + case 1: + usb_set(USB_IN_INT_EP1, USB_IN_INT_EN); + break; + case 2: + usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); + break; + case 3: + usb_set(USB_IN_INT_EP3, USB_IN_INT_EN); + break; + default: + DEBUG("Unknown endpoint: %d\n", ep); + break; + } +} + +/** Disable EP interrupt */ +static void pio_irq_disable(int ep) +{ + DEBUG("%s: %d\n", __FUNCTION__, ep); + + switch (ep) { + case 1: + usb_clear(USB_IN_INT_EP1, USB_IN_INT_EN); + break; + case 2: + usb_clear(USB_OUT_INT_EP2, USB_OUT_INT_EN); + break; + case 3: + usb_clear(USB_IN_INT_EP3, USB_IN_INT_EN); + break; + default: + DEBUG("Unknown endpoint: %d\n", ep); + break; + } +} + +/* + * nuke - dequeue ALL requests + */ +void nuke(struct lh7a40x_ep *ep, int status) +{ + struct lh7a40x_request *req; + + DEBUG("%s, %p\n", __FUNCTION__, ep); + + /* Flush FIFO */ + flush(ep); + + /* called with irqs blocked */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct lh7a40x_request, queue); + done(ep, req, status); + } + + /* Disable IRQ if EP is enabled (has decriptor) */ + if (ep->desc) + pio_irq_disable(ep_index(ep)); +} + +/* +void nuke_all(struct lh7a40x_udc *dev) +{ + int n; + for(n=0; n<UDC_MAX_ENDPOINTS; n++) { + struct lh7a40x_ep *ep = &dev->ep[n]; + usb_set_index(n); + nuke(ep, 0); + } +}*/ + +/* +static void flush_all(struct lh7a40x_udc *dev) +{ + int n; + for (n = 0; n < UDC_MAX_ENDPOINTS; n++) + { + struct lh7a40x_ep *ep = &dev->ep[n]; + flush(ep); + } +} +*/ + +/** Flush EP + * NOTE: INDEX register must be set before this call + */ +static void flush(struct lh7a40x_ep *ep) +{ + DEBUG("%s, %p\n", __FUNCTION__, ep); + + switch (ep->ep_type) { + case ep_control: + /* check, by implication c.f. 15.1.2.11 */ + break; + + case ep_bulk_in: + case ep_interrupt: + /* if(csr & USB_IN_CSR1_IN_PKT_RDY) */ + usb_set(USB_IN_CSR1_FIFO_FLUSH, ep->csr1); + break; + + case ep_bulk_out: + /* if(csr & USB_OUT_CSR1_OUT_PKT_RDY) */ + usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); + break; + } +} + +/** + * lh7a40x_in_epn - handle IN interrupt + */ +static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) +{ + u32 csr; + struct lh7a40x_ep *ep = &dev->ep[ep_idx]; + struct lh7a40x_request *req; + + usb_set_index(ep_idx); + + csr = usb_read(ep->csr1); + DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr); + + if (csr & USB_IN_CSR1_SENT_STALL) { + DEBUG("USB_IN_CSR1_SENT_STALL\n"); + usb_set(USB_IN_CSR1_SENT_STALL /*|USB_IN_CSR1_SEND_STALL */ , + ep->csr1); + return; + } + + if (!ep->desc) { + DEBUG("%s: NO EP DESC\n", __FUNCTION__); + return; + } + + if (list_empty(&ep->queue)) + req = 0; + else + req = list_entry(ep->queue.next, struct lh7a40x_request, queue); + + DEBUG("req: %p\n", req); + + if (!req) + return; + + write_fifo(ep, req); +} + +/* ********************************************************************************************* */ +/* Bulk OUT (recv) + */ + +static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) +{ + struct lh7a40x_ep *ep = &dev->ep[ep_idx]; + struct lh7a40x_request *req; + + DEBUG("%s: %d\n", __FUNCTION__, ep_idx); + + usb_set_index(ep_idx); + + if (ep->desc) { + u32 csr; + csr = usb_read(ep->csr1); + + while ((csr = + usb_read(ep-> + csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY | + USB_OUT_CSR1_SENT_STALL)) { + DEBUG("%s: %x\n", __FUNCTION__, csr); + + if (csr & USB_OUT_CSR1_SENT_STALL) { + DEBUG("%s: stall sent, flush fifo\n", + __FUNCTION__); + /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */ + flush(ep); + } else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) { + if (list_empty(&ep->queue)) + req = 0; + else + req = + list_entry(ep->queue.next, + struct lh7a40x_request, + queue); + + if (!req) { + printk("%s: NULL REQ %d\n", + __FUNCTION__, ep_idx); + flush(ep); + break; + } else { + read_fifo(ep, req); + } + } + + } + + } else { + /* Throw packet away.. */ + printk("%s: No descriptor?!?\n", __FUNCTION__); + flush(ep); + } +} + +static void stop_activity(struct lh7a40x_udc *dev, + struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = 0; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < UDC_MAX_ENDPOINTS; i++) { + struct lh7a40x_ep *ep = &dev->ep[i]; + ep->stopped = 1; + + usb_set_index(i); + nuke(ep, -ESHUTDOWN); + } + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +/** Handle USB RESET interrupt + */ +static void lh7a40x_reset_intr(struct lh7a40x_udc *dev) +{ +#if 0 /* def CONFIG_ARCH_LH7A404 */ + /* Does not work always... */ + + DEBUG("%s: %d\n", __FUNCTION__, dev->usb_address); + + if (!dev->usb_address) { + /*usb_set(USB_RESET_IO, USB_RESET); + mdelay(5); + usb_clear(USB_RESET_IO, USB_RESET); */ + return; + } + /* Put the USB controller into reset. */ + usb_set(USB_RESET_IO, USB_RESET); + + /* Set Device ID to 0 */ + udc_set_address(dev, 0); + + /* Let PLL2 settle down */ + mdelay(5); + + /* Release the USB controller from reset */ + usb_clear(USB_RESET_IO, USB_RESET); + + /* Re-enable UDC */ + udc_enable(dev); + +#endif + dev->gadget.speed = USB_SPEED_FULL; +} + +/* + * lh7a40x usb client interrupt handler. + */ +static irqreturn_t lh7a40x_udc_irq(int irq, void *_dev, struct pt_regs *r) +{ + struct lh7a40x_udc *dev = _dev; + + DEBUG("\n\n"); + + spin_lock(&dev->lock); + + for (;;) { + u32 intr_in = usb_read(USB_IN_INT); + u32 intr_out = usb_read(USB_OUT_INT); + u32 intr_int = usb_read(USB_INT); + + /* Test also against enable bits.. (lh7a40x errata).. Sigh.. */ + u32 in_en = usb_read(USB_IN_INT_EN); + u32 out_en = usb_read(USB_OUT_INT_EN); + + if (!intr_out && !intr_in && !intr_int) + break; + + DEBUG("%s (on state %s)\n", __FUNCTION__, + state_names[dev->ep0state]); + DEBUG("intr_out = %x\n", intr_out); + DEBUG("intr_in = %x\n", intr_in); + DEBUG("intr_int = %x\n", intr_int); + + if (intr_in) { + usb_write(intr_in, USB_IN_INT); + + if ((intr_in & USB_IN_INT_EP1) + && (in_en & USB_IN_INT_EP1)) { + DEBUG("USB_IN_INT_EP1\n"); + lh7a40x_in_epn(dev, 1, intr_in); + } + if ((intr_in & USB_IN_INT_EP3) + && (in_en & USB_IN_INT_EP3)) { + DEBUG("USB_IN_INT_EP3\n"); + lh7a40x_in_epn(dev, 3, intr_in); + } + if (intr_in & USB_IN_INT_EP0) { + DEBUG("USB_IN_INT_EP0 (control)\n"); + lh7a40x_handle_ep0(dev, intr_in); + } + } + + if (intr_out) { + usb_write(intr_out, USB_OUT_INT); + + if ((intr_out & USB_OUT_INT_EP2) + && (out_en & USB_OUT_INT_EP2)) { + DEBUG("USB_OUT_INT_EP2\n"); + lh7a40x_out_epn(dev, 2, intr_out); + } + } + + if (intr_int) { + usb_write(intr_int, USB_INT); + + if (intr_int & USB_INT_RESET_INT) { + lh7a40x_reset_intr(dev); + } + + if (intr_int & USB_INT_RESUME_INT) { + DEBUG("USB resume\n"); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume + && is_usb_connected()) { + dev->driver->resume(&dev->gadget); + } + } + + if (intr_int & USB_INT_SUSPEND_INT) { + DEBUG("USB suspend%s\n", + is_usb_connected()? "" : "+disconnect"); + if (!is_usb_connected()) { + stop_activity(dev, dev->driver); + } else if (dev->gadget.speed != + USB_SPEED_UNKNOWN && dev->driver + && dev->driver->suspend) { + dev->driver->suspend(&dev->gadget); + } + } + + } + } + + spin_unlock(&dev->lock); + + return IRQ_HANDLED; +} + +static int lh7a40x_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct lh7a40x_ep *ep; + struct lh7a40x_udc *dev; + unsigned long flags; + + DEBUG("%s, %p\n", __FUNCTION__, _ep); + + ep = container_of(_ep, struct lh7a40x_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) { + DEBUG("%s, bad ep or descriptor\n", __FUNCTION__); + return -EINVAL; + } + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + return -EINVAL; + } + + /* hardware _could_ do smaller, but driver doesn't */ + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep)) + || !desc->wMaxPacketSize) { + DEBUG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); + return -ERANGE; + } + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + DEBUG("%s, bogus device state\n", __FUNCTION__); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + + ep->stopped = 0; + ep->desc = desc; + ep->pio_irqs = 0; + ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + + /* Reset halt state (does flush) */ + lh7a40x_set_halt(_ep, 0); + + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name); + return 0; +} + +/** Disable EP + * NOTE: Sets INDEX register + */ +static int lh7a40x_ep_disable(struct usb_ep *_ep) +{ + struct lh7a40x_ep *ep; + unsigned long flags; + + DEBUG("%s, %p\n", __FUNCTION__, _ep); + + ep = container_of(_ep, struct lh7a40x_ep, ep); + if (!_ep || !ep->desc) { + DEBUG("%s, %s not enabled\n", __FUNCTION__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + + usb_set_index(ep_index(ep)); + + /* Nuke all pending requests (does flush) */ + nuke(ep, -ESHUTDOWN); + + /* Disable ep IRQ */ + pio_irq_disable(ep_index(ep)); + + ep->desc = 0; + ep->stopped = 1; + + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name); + return 0; +} + +static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, + int gfp_flags) +{ + struct lh7a40x_request *req; + + DEBUG("%s, %p\n", __FUNCTION__, ep); + + req = kmalloc(sizeof *req, gfp_flags); + if (!req) + return 0; + + memset(req, 0, sizeof *req); + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req) +{ + struct lh7a40x_request *req; + + DEBUG("%s, %p\n", __FUNCTION__, ep); + + req = container_of(_req, struct lh7a40x_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes, + dma_addr_t * dma, int gfp_flags) +{ + char *retval; + + DEBUG("%s (%p, %d, %d)\n", __FUNCTION__, ep, bytes, gfp_flags); + + retval = kmalloc(bytes, gfp_flags & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (retval) + *dma = virt_to_bus(retval); + return retval; +} + +static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma, + unsigned bytes) +{ + DEBUG("%s, %p\n", __FUNCTION__, ep); + kfree(buf); +} + +/** Queue one request + * Kickstart transfer if needed + * NOTE: Sets INDEX register + */ +static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req, + int gfp_flags) +{ + struct lh7a40x_request *req; + struct lh7a40x_ep *ep; + struct lh7a40x_udc *dev; + unsigned long flags; + + DEBUG("\n\n\n%s, %p\n", __FUNCTION__, _ep); + + req = container_of(_req, struct lh7a40x_request, req); + if (unlikely + (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue))) { + DEBUG("%s, bad params\n", __FUNCTION__); + return -EINVAL; + } + + ep = container_of(_ep, struct lh7a40x_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + + dev = ep->dev; + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver); + return -ESHUTDOWN; + } + + DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length, + _req->buf); + + spin_lock_irqsave(&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue), + ep->stopped); + if (list_empty(&ep->queue) && likely(!ep->stopped)) { + u32 csr; + + if (unlikely(ep_index(ep) == 0)) { + /* EP0 */ + list_add_tail(&req->queue, &ep->queue); + lh7a40x_ep0_kick(dev, ep); + req = 0; + } else if (ep_is_in(ep)) { + /* EP1 & EP3 */ + usb_set_index(ep_index(ep)); + csr = usb_read(ep->csr1); + pio_irq_enable(ep_index(ep)); + if ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) == 0) { + if (write_fifo(ep, req) == 1) + req = 0; + } + } else { + /* EP2 */ + usb_set_index(ep_index(ep)); + csr = usb_read(ep->csr1); + pio_irq_enable(ep_index(ep)); + if (!(csr & USB_OUT_CSR1_FIFO_FULL)) { + if (read_fifo(ep, req) == 1) + req = 0; + } + } + } + + /* pio or dma irq handler advances the queue. */ + if (likely(req != 0)) + list_add_tail(&req->queue, &ep->queue); + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/* dequeue JUST ONE request */ +static int lh7a40x_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct lh7a40x_ep *ep; + struct lh7a40x_request *req; + unsigned long flags; + + DEBUG("%s, %p\n", __FUNCTION__, _ep); + + ep = container_of(_ep, struct lh7a40x_ep, ep); + if (!_ep || ep->ep.name == ep0name) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore(&ep->dev->lock, flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/** Halt specific EP + * Return 0 if success + * NOTE: Sets INDEX register to EP ! + */ +static int lh7a40x_set_halt(struct usb_ep *_ep, int value) +{ + struct lh7a40x_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct lh7a40x_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + + usb_set_index(ep_index(ep)); + + DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value); + + spin_lock_irqsave(&ep->dev->lock, flags); + + if (ep_index(ep) == 0) { + /* EP0 */ + usb_set(EP0_SEND_STALL, ep->csr1); + } else if (ep_is_in(ep)) { + u32 csr = usb_read(ep->csr1); + if (value && ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) + || !list_empty(&ep->queue))) { + /* + * Attempts to halt IN endpoints will fail (returning -EAGAIN) + * if any transfer requests are still queued, or if the controller + * FIFO still holds bytes that the host hasn’t collected. + */ + spin_unlock_irqrestore(&ep->dev->lock, flags); + DEBUG + ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n", + (csr & USB_IN_CSR1_FIFO_NOT_EMPTY), + !list_empty(&ep->queue)); + return -EAGAIN; + } + flush(ep); + if (value) + usb_set(USB_IN_CSR1_SEND_STALL, ep->csr1); + else { + usb_clear(USB_IN_CSR1_SEND_STALL, ep->csr1); + usb_set(USB_IN_CSR1_CLR_DATA_TOGGLE, ep->csr1); + } + + } else { + + flush(ep); + if (value) + usb_set(USB_OUT_CSR1_SEND_STALL, ep->csr1); + else { + usb_clear(USB_OUT_CSR1_SEND_STALL, ep->csr1); + usb_set(USB_OUT_CSR1_CLR_DATA_REG, ep->csr1); + } + } + + if (value) { + ep->stopped = 1; + } else { + ep->stopped = 0; + } + + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS"); + + return 0; +} + +/** Return bytes in EP FIFO + * NOTE: Sets INDEX register to EP + */ +static int lh7a40x_fifo_status(struct usb_ep *_ep) +{ + u32 csr; + int count = 0; + struct lh7a40x_ep *ep; + + ep = container_of(_ep, struct lh7a40x_ep, ep); + if (!_ep) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return -ENODEV; + } + + DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep)); + + /* LPD can't report unclaimed bytes from IN fifos */ + if (ep_is_in(ep)) + return -EOPNOTSUPP; + + usb_set_index(ep_index(ep)); + + csr = usb_read(ep->csr1); + if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN || + csr & USB_OUT_CSR1_OUT_PKT_RDY) { + count = usb_read(USB_OUT_FIFO_WC1); + } + + return count; +} + +/** Flush EP FIFO + * NOTE: Sets INDEX register to EP + */ +static void lh7a40x_fifo_flush(struct usb_ep *_ep) +{ + struct lh7a40x_ep *ep; + + ep = container_of(_ep, struct lh7a40x_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return; + } + + usb_set_index(ep_index(ep)); + flush(ep); +} + +/****************************************************************/ +/* End Point 0 related functions */ +/****************************************************************/ + +/* return: 0 = still running, 1 = completed, negative = errno */ +static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) +{ + u32 max; + unsigned count; + int is_last; + + max = ep_maxpacket(ep); + + DEBUG_EP0("%s\n", __FUNCTION__); + + count = write_packet(ep, req, max); + + /* last packet is usually short (or a zlp) */ + if (unlikely(count != max)) + is_last = 1; + else { + if (likely(req->req.length != req->req.actual) || req->req.zero) + is_last = 0; + else + is_last = 1; + } + + DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__, + ep->ep.name, count, + is_last ? "/L" : "", req->req.length - req->req.actual, req); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done(ep, req, 0); + return 1; + } + + return 0; +} + +static __inline__ int lh7a40x_fifo_read(struct lh7a40x_ep *ep, + unsigned char *cp, int max) +{ + int bytes; + int count = usb_read(USB_OUT_FIFO_WC1); + volatile u32 *fifo = (volatile u32 *)ep->fifo; + + if (count > max) + count = max; + bytes = count; + while (count--) + *cp++ = *fifo & 0xFF; + return bytes; +} + +static __inline__ void lh7a40x_fifo_write(struct lh7a40x_ep *ep, + unsigned char *cp, int count) +{ + volatile u32 *fifo = (volatile u32 *)ep->fifo; + DEBUG_EP0("fifo_write: %d %d\n", ep_index(ep), count); + while (count--) + *fifo = *cp++; +} + +static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) +{ + u32 csr; + u8 *buf; + unsigned bufferspace, count, is_short; + volatile u32 *fifo = (volatile u32 *)ep->fifo; + + DEBUG_EP0("%s\n", __FUNCTION__); + + csr = usb_read(USB_EP0_CSR); + if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) + return 0; + + buf = req->req.buf + req->req.actual; + prefetchw(buf); + bufferspace = req->req.length - req->req.actual; + + /* read all bytes from this packet */ + if (likely(csr & EP0_OUT_PKT_RDY)) { + count = usb_read(USB_OUT_FIFO_WC1); + req->req.actual += min(count, bufferspace); + } else /* zlp */ + count = 0; + + is_short = (count < ep->ep.maxpacket); + DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, csr, count, + is_short ? "/S" : "", req, req->req.actual, req->req.length); + + while (likely(count-- != 0)) { + u8 byte = (u8) (*fifo & 0xff); + + if (unlikely(bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DEBUG_EP0("%s overflow %d\n", ep->ep.name, + count); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done(ep, req, 0); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +/** + * udc_set_address - set the USB address for this device + * @address: + * + * Called from control endpoint function after it decodes a set address setup packet. + */ +static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address) +{ + DEBUG_EP0("%s: %d\n", __FUNCTION__, address); + /* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */ + dev->usb_address = address; + usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA); + usb_set(USB_FA_ADDR_UPDATE | (address & USB_FA_FUNCTION_ADDR), USB_FA); + /* usb_read(USB_FA); */ +} + +/* + * DATA_STATE_RECV (OUT_PKT_RDY) + * - if error + * set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits + * - else + * set EP0_CLR_OUT bit + if last set EP0_DATA_END bit + */ +static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr) +{ + struct lh7a40x_request *req; + struct lh7a40x_ep *ep = &dev->ep[0]; + int ret; + + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + if (list_empty(&ep->queue)) + req = 0; + else + req = list_entry(ep->queue.next, struct lh7a40x_request, queue); + + if (req) { + + if (req->req.length == 0) { + DEBUG_EP0("ZERO LENGTH OUT!\n"); + usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); + dev->ep0state = WAIT_FOR_SETUP; + return; + } + ret = read_fifo_ep0(ep, req); + if (ret) { + /* Done! */ + DEBUG_EP0("%s: finished, waiting for status\n", + __FUNCTION__); + + usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); + dev->ep0state = WAIT_FOR_SETUP; + } else { + /* Not done yet.. */ + DEBUG_EP0("%s: not finished\n", __FUNCTION__); + usb_set(EP0_CLR_OUT, USB_EP0_CSR); + } + } else { + DEBUG_EP0("NO REQ??!\n"); + } +} + +/* + * DATA_STATE_XMIT + */ +static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr) +{ + struct lh7a40x_request *req; + struct lh7a40x_ep *ep = &dev->ep[0]; + int ret, need_zlp = 0; + + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + if (list_empty(&ep->queue)) + req = 0; + else + req = list_entry(ep->queue.next, struct lh7a40x_request, queue); + + if (!req) { + DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__); + return 0; + } + + if (req->req.length == 0) { + + usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); + dev->ep0state = WAIT_FOR_SETUP; + return 1; + } + + if (req->req.length - req->req.actual == EP0_PACKETSIZE) { + /* Next write will end with the packet size, */ + /* so we need Zero-length-packet */ + need_zlp = 1; + } + + ret = write_fifo_ep0(ep, req); + + if (ret == 1 && !need_zlp) { + /* Last packet */ + DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__); + + usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); + dev->ep0state = WAIT_FOR_SETUP; + } else { + DEBUG_EP0("%s: not finished\n", __FUNCTION__); + usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR); + } + + if (need_zlp) { + DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__); + usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR); + dev->ep0state = DATA_STATE_NEED_ZLP; + } + + return 1; +} + +static int lh7a40x_handle_get_status(struct lh7a40x_udc *dev, + struct usb_ctrlrequest *ctrl) +{ + struct lh7a40x_ep *ep0 = &dev->ep[0]; + struct lh7a40x_ep *qep; + int reqtype = (ctrl->bRequestType & USB_RECIP_MASK); + u16 val = 0; + + if (reqtype == USB_RECIP_INTERFACE) { + /* This is not supported. + * And according to the USB spec, this one does nothing.. + * Just return 0 + */ + DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n"); + } else if (reqtype == USB_RECIP_DEVICE) { + DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n"); + val |= (1 << 0); /* Self powered */ + /*val |= (1<<1); *//* Remote wakeup */ + } else if (reqtype == USB_RECIP_ENDPOINT) { + int ep_num = (ctrl->wIndex & ~USB_DIR_IN); + + DEBUG_SETUP + ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n", + ep_num, ctrl->wLength); + + if (ctrl->wLength > 2 || ep_num > 3) + return -EOPNOTSUPP; + + qep = &dev->ep[ep_num]; + if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0) + && ep_index(qep) != 0) { + return -EOPNOTSUPP; + } + + usb_set_index(ep_index(qep)); + + /* Return status on next IN token */ + switch (qep->ep_type) { + case ep_control: + val = + (usb_read(qep->csr1) & EP0_SEND_STALL) == + EP0_SEND_STALL; + break; + case ep_bulk_in: + case ep_interrupt: + val = + (usb_read(qep->csr1) & USB_IN_CSR1_SEND_STALL) == + USB_IN_CSR1_SEND_STALL; + break; + case ep_bulk_out: + val = + (usb_read(qep->csr1) & USB_OUT_CSR1_SEND_STALL) == + USB_OUT_CSR1_SEND_STALL; + break; + } + + /* Back to EP0 index */ + usb_set_index(0); + + DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num, + ctrl->wIndex, val); + } else { + DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype); + return -EOPNOTSUPP; + } + + /* Clear "out packet ready" */ + usb_set((EP0_CLR_OUT), USB_EP0_CSR); + /* Put status to FIFO */ + lh7a40x_fifo_write(ep0, (u8 *) & val, sizeof(val)); + /* Issue "In packet ready" */ + usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); + + return 0; +} + +/* + * WAIT_FOR_SETUP (OUT_PKT_RDY) + * - read data packet from EP0 FIFO + * - decode command + * - if error + * set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits + * - else + * set EP0_CLR_OUT | EP0_DATA_END bits + */ +static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) +{ + struct lh7a40x_ep *ep = &dev->ep[0]; + struct usb_ctrlrequest ctrl; + int i, bytes, is_in; + + DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr); + + /* Nuke all previous transfers */ + nuke(ep, -EPROTO); + + /* read control req from fifo (8 bytes) */ + bytes = lh7a40x_fifo_read(ep, (unsigned char *)&ctrl, 8); + + DEBUG_SETUP("Read CTRL REQ %d bytes\n", bytes); + DEBUG_SETUP("CTRL.bRequestType = %d (is_in %d)\n", ctrl.bRequestType, + ctrl.bRequestType == USB_DIR_IN); + DEBUG_SETUP("CTRL.bRequest = %d\n", ctrl.bRequest); + DEBUG_SETUP("CTRL.wLength = %d\n", ctrl.wLength); + DEBUG_SETUP("CTRL.wValue = %d (%d)\n", ctrl.wValue, ctrl.wValue >> 8); + DEBUG_SETUP("CTRL.wIndex = %d\n", ctrl.wIndex); + + /* Set direction of EP0 */ + if (likely(ctrl.bRequestType & USB_DIR_IN)) { + ep->bEndpointAddress |= USB_DIR_IN; + is_in = 1; + } else { + ep->bEndpointAddress &= ~USB_DIR_IN; + is_in = 0; + } + + dev->req_pending = 1; + + /* Handle some SETUP packets ourselves */ + switch (ctrl.bRequest) { + case USB_REQ_SET_ADDRESS: + if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) + break; + + DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue); + udc_set_address(dev, ctrl.wValue); + usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); + return; + + case USB_REQ_GET_STATUS:{ + if (lh7a40x_handle_get_status(dev, &ctrl) == 0) + return; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + if (ctrl.bRequestType == USB_RECIP_ENDPOINT) { + struct lh7a40x_ep *qep; + int ep_num = (ctrl.wIndex & 0x0f); + + /* Support only HALT feature */ + if (ctrl.wValue != 0 || ctrl.wLength != 0 + || ep_num > 3 || ep_num < 1) + break; + + qep = &dev->ep[ep_num]; + if (ctrl.bRequest == USB_REQ_SET_FEATURE) { + DEBUG_SETUP("SET_FEATURE (%d)\n", + ep_num); + lh7a40x_set_halt(&qep->ep, 1); + } else { + DEBUG_SETUP("CLR_FEATURE (%d)\n", + ep_num); + lh7a40x_set_halt(&qep->ep, 0); + } + usb_set_index(0); + + /* Reply with a ZLP on next IN token */ + usb_set((EP0_CLR_OUT | EP0_DATA_END), + USB_EP0_CSR); + return; + } + break; + } + + default: + break; + } + + if (likely(dev->driver)) { + /* device-2-host (IN) or no data setup command, process immediately */ + spin_unlock(&dev->lock); + i = dev->driver->setup(&dev->gadget, &ctrl); + spin_lock(&dev->lock); + + if (i < 0) { + /* setup processing failed, force stall */ + DEBUG_SETUP + (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n", + i); + usb_set_index(0); + usb_set((EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL), + USB_EP0_CSR); + + /* ep->stopped = 1; */ + dev->ep0state = WAIT_FOR_SETUP; + } + } +} + +/* + * DATA_STATE_NEED_ZLP + */ +static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr) +{ + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + /* c.f. Table 15-14 */ + usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); + dev->ep0state = WAIT_FOR_SETUP; +} + +/* + * handle ep0 interrupt + */ +static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr) +{ + struct lh7a40x_ep *ep = &dev->ep[0]; + u32 csr; + + /* Set index 0 */ + usb_set_index(0); + csr = usb_read(USB_EP0_CSR); + + DEBUG_EP0("%s: csr = %x\n", __FUNCTION__, csr); + + /* + * For overview of what we should be doing see c.f. Chapter 18.1.2.4 + * We will follow that outline here modified by our own global state + * indication which provides hints as to what we think should be + * happening.. + */ + + /* + * if SENT_STALL is set + * - clear the SENT_STALL bit + */ + if (csr & EP0_SENT_STALL) { + DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __FUNCTION__, csr); + usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR); + nuke(ep, -ECONNABORTED); + dev->ep0state = WAIT_FOR_SETUP; + return; + } + + /* + * if a transfer is in progress && IN_PKT_RDY and OUT_PKT_RDY are clear + * - fill EP0 FIFO + * - if last packet + * - set IN_PKT_RDY | DATA_END + * - else + * set IN_PKT_RDY + */ + if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) { + DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n", + __FUNCTION__); + + switch (dev->ep0state) { + case DATA_STATE_XMIT: + DEBUG_EP0("continue with DATA_STATE_XMIT\n"); + lh7a40x_ep0_in(dev, csr); + return; + case DATA_STATE_NEED_ZLP: + DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n"); + lh7a40x_ep0_in_zlp(dev, csr); + return; + default: + /* Stall? */ + DEBUG_EP0("Odd state!! state = %s\n", + state_names[dev->ep0state]); + dev->ep0state = WAIT_FOR_SETUP; + /* nuke(ep, 0); */ + /* usb_set(EP0_SEND_STALL, ep->csr1); */ + break; + } + } + + /* + * if SETUP_END is set + * - abort the last transfer + * - set SERVICED_SETUP_END_BIT + */ + if (csr & EP0_SETUP_END) { + DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __FUNCTION__, csr); + + usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR); + + nuke(ep, 0); + dev->ep0state = WAIT_FOR_SETUP; + } + + /* + * if EP0_OUT_PKT_RDY is set + * - read data packet from EP0 FIFO + * - decode command + * - if error + * set SERVICED_OUT_PKT_RDY | DATA_END bits | SEND_STALL + * - else + * set SERVICED_OUT_PKT_RDY | DATA_END bits + */ + if (csr & EP0_OUT_PKT_RDY) { + + DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__, + csr); + + switch (dev->ep0state) { + case WAIT_FOR_SETUP: + DEBUG_EP0("WAIT_FOR_SETUP\n"); + lh7a40x_ep0_setup(dev, csr); + break; + + case DATA_STATE_RECV: + DEBUG_EP0("DATA_STATE_RECV\n"); + lh7a40x_ep0_out(dev, csr); + break; + + default: + /* send stall? */ + DEBUG_EP0("strange state!! 2. send stall? state = %d\n", + dev->ep0state); + break; + } + } +} + +static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep) +{ + u32 csr; + + usb_set_index(0); + csr = usb_read(USB_EP0_CSR); + + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + /* Clear "out packet ready" */ + usb_set(EP0_CLR_OUT, USB_EP0_CSR); + + if (ep_is_in(ep)) { + dev->ep0state = DATA_STATE_XMIT; + lh7a40x_ep0_in(dev, csr); + } else { + dev->ep0state = DATA_STATE_RECV; + lh7a40x_ep0_out(dev, csr); + } +} + +/* --------------------------------------------------------------------------- + * device-scoped parts of the api to the usb controller hardware + * --------------------------------------------------------------------------- + */ + +static int lh7a40x_udc_get_frame(struct usb_gadget *_gadget) +{ + u32 frame1 = usb_read(USB_FRM_NUM1); /* Least significant 8 bits */ + u32 frame2 = usb_read(USB_FRM_NUM2); /* Most significant 3 bits */ + DEBUG("%s, %p\n", __FUNCTION__, _gadget); + return ((frame2 & 0x07) << 8) | (frame1 & 0xff); +} + +static int lh7a40x_udc_wakeup(struct usb_gadget *_gadget) +{ + /* host may not have enabled remote wakeup */ + /*if ((UDCCS0 & UDCCS0_DRWF) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(UDCCR_RSM); */ + return -ENOTSUPP; +} + +static const struct usb_gadget_ops lh7a40x_udc_ops = { + .get_frame = lh7a40x_udc_get_frame, + .wakeup = lh7a40x_udc_wakeup, + /* current versions must always be self-powered */ +}; + +static void nop_release(struct device *dev) +{ + DEBUG("%s %s\n", __FUNCTION__, dev->bus_id); +} + +static struct lh7a40x_udc memory = { + .usb_address = 0, + + .gadget = { + .ops = &lh7a40x_udc_ops, + .ep0 = &memory.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, + }, + }, + + /* control endpoint */ + .ep[0] = { + .ep = { + .name = ep0name, + .ops = &lh7a40x_ep_ops, + .maxpacket = EP0_PACKETSIZE, + }, + .dev = &memory, + + .bEndpointAddress = 0, + .bmAttributes = 0, + + .ep_type = ep_control, + .fifo = io_p2v(USB_EP0_FIFO), + .csr1 = USB_EP0_CSR, + .csr2 = USB_EP0_CSR, + }, + + /* first group of endpoints */ + .ep[1] = { + .ep = { + .name = "ep1in-bulk", + .ops = &lh7a40x_ep_ops, + .maxpacket = 64, + }, + .dev = &memory, + + .bEndpointAddress = USB_DIR_IN | 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + + .ep_type = ep_bulk_in, + .fifo = io_p2v(USB_EP1_FIFO), + .csr1 = USB_IN_CSR1, + .csr2 = USB_IN_CSR2, + }, + + .ep[2] = { + .ep = { + .name = "ep2out-bulk", + .ops = &lh7a40x_ep_ops, + .maxpacket = 64, + }, + .dev = &memory, + + .bEndpointAddress = 2, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + + .ep_type = ep_bulk_out, + .fifo = io_p2v(USB_EP2_FIFO), + .csr1 = USB_OUT_CSR1, + .csr2 = USB_OUT_CSR2, + }, + + .ep[3] = { + .ep = { + .name = "ep3in-int", + .ops = &lh7a40x_ep_ops, + .maxpacket = 64, + }, + .dev = &memory, + + .bEndpointAddress = USB_DIR_IN | 3, + .bmAttributes = USB_ENDPOINT_XFER_INT, + + .ep_type = ep_interrupt, + .fifo = io_p2v(USB_EP3_FIFO), + .csr1 = USB_IN_CSR1, + .csr2 = USB_IN_CSR2, + }, +}; + +/* + * probe - binds to the platform device + */ +static int lh7a40x_udc_probe(struct device *_dev) +{ + struct lh7a40x_udc *dev = &memory; + int retval; + + DEBUG("%s: %p\n", __FUNCTION__, _dev); + + spin_lock_init(&dev->lock); + dev->dev = _dev; + + device_initialize(&dev->gadget.dev); + dev->gadget.dev.parent = _dev; + + the_controller = dev; + dev_set_drvdata(_dev, dev); + + udc_disable(dev); + udc_reinit(dev); + + /* irq setup after old hardware state is cleaned up */ + retval = + request_irq(IRQ_USBINTR, lh7a40x_udc_irq, SA_INTERRUPT, driver_name, + dev); + if (retval != 0) { + DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name, + IRQ_USBINTR, retval); + return -EBUSY; + } + + create_proc_files(); + + return retval; +} + +static int lh7a40x_udc_remove(struct device *_dev) +{ + struct lh7a40x_udc *dev = _dev->driver_data; + + DEBUG("%s: %p\n", __FUNCTION__, dev); + + udc_disable(dev); + remove_proc_files(); + usb_gadget_unregister_driver(dev->driver); + + free_irq(IRQ_USBINTR, dev); + + dev_set_drvdata(_dev, 0); + + the_controller = 0; + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct device_driver udc_driver = { + .name = (char *)driver_name, + .bus = &platform_bus_type, + .probe = lh7a40x_udc_probe, + .remove = lh7a40x_udc_remove + /* FIXME power management support */ + /* .suspend = ... disable UDC */ + /* .resume = ... re-enable UDC */ +}; + +static int __init udc_init(void) +{ + DEBUG("%s: %s version %s\n", __FUNCTION__, driver_name, DRIVER_VERSION); + return driver_register(&udc_driver); +} + +static void __exit udc_exit(void) +{ + driver_unregister(&udc_driver); +} + +module_init(udc_init); +module_exit(udc_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h new file mode 100644 index 0000000..1bb455c --- /dev/null +++ b/drivers/usb/gadget/lh7a40x_udc.h @@ -0,0 +1,261 @@ +/* + * linux/drivers/usb/gadget/lh7a40x_udc.h + * Sharp LH7A40x on-chip full speed USB device controllers + * + * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID + * Copyright (C) 2004 Bo Henriksen, Nordic ID + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __LH7A40X_H_ +#define __LH7A40X_H_ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> + +#include <asm/byteorder.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> +#include <asm/hardware.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +/* + * Memory map + */ + +#define USB_FA 0x80000200 // function address register +#define USB_PM 0x80000204 // power management register + +#define USB_IN_INT 0x80000208 // IN interrupt register bank (EP0-EP3) +#define USB_OUT_INT 0x80000210 // OUT interrupt register bank (EP2) +#define USB_INT 0x80000218 // interrupt register bank + +#define USB_IN_INT_EN 0x8000021C // IN interrupt enable register bank +#define USB_OUT_INT_EN 0x80000224 // OUT interrupt enable register bank +#define USB_INT_EN 0x8000022C // USB interrupt enable register bank + +#define USB_FRM_NUM1 0x80000230 // Frame number1 register +#define USB_FRM_NUM2 0x80000234 // Frame number2 register +#define USB_INDEX 0x80000238 // index register + +#define USB_IN_MAXP 0x80000240 // IN MAXP register +#define USB_IN_CSR1 0x80000244 // IN CSR1 register/EP0 CSR register +#define USB_EP0_CSR 0x80000244 // IN CSR1 register/EP0 CSR register +#define USB_IN_CSR2 0x80000248 // IN CSR2 register +#define USB_OUT_MAXP 0x8000024C // OUT MAXP register + +#define USB_OUT_CSR1 0x80000250 // OUT CSR1 register +#define USB_OUT_CSR2 0x80000254 // OUT CSR2 register +#define USB_OUT_FIFO_WC1 0x80000258 // OUT FIFO write count1 register +#define USB_OUT_FIFO_WC2 0x8000025C // OUT FIFO write count2 register + +#define USB_RESET 0x8000044C // USB reset register + +#define USB_EP0_FIFO 0x80000280 +#define USB_EP1_FIFO 0x80000284 +#define USB_EP2_FIFO 0x80000288 +#define USB_EP3_FIFO 0x8000028c + +/* + * USB reset register + */ +#define USB_RESET_APB (1<<1) //resets USB APB control side WRITE +#define USB_RESET_IO (1<<0) //resets USB IO side WRITE + +/* + * USB function address register + */ +#define USB_FA_ADDR_UPDATE (1<<7) +#define USB_FA_FUNCTION_ADDR (0x7F) + +/* + * Power Management register + */ +#define PM_USB_DCP (1<<5) +#define PM_USB_ENABLE (1<<4) +#define PM_USB_RESET (1<<3) +#define PM_UC_RESUME (1<<2) +#define PM_SUSPEND_MODE (1<<1) +#define PM_ENABLE_SUSPEND (1<<0) + +/* + * IN interrupt register + */ +#define USB_IN_INT_EP3 (1<<3) +#define USB_IN_INT_EP1 (1<<1) +#define USB_IN_INT_EP0 (1<<0) + +/* + * OUT interrupt register + */ +#define USB_OUT_INT_EP2 (1<<2) + +/* + * USB interrupt register + */ +#define USB_INT_RESET_INT (1<<2) +#define USB_INT_RESUME_INT (1<<1) +#define USB_INT_SUSPEND_INT (1<<0) + +/* + * USB interrupt enable register + */ +#define USB_INT_EN_USB_RESET_INTER (1<<2) +#define USB_INT_EN_RESUME_INTER (1<<1) +#define USB_INT_EN_SUSPEND_INTER (1<<0) + +/* + * INCSR1 register + */ +#define USB_IN_CSR1_CLR_DATA_TOGGLE (1<<6) +#define USB_IN_CSR1_SENT_STALL (1<<5) +#define USB_IN_CSR1_SEND_STALL (1<<4) +#define USB_IN_CSR1_FIFO_FLUSH (1<<3) +#define USB_IN_CSR1_FIFO_NOT_EMPTY (1<<1) +#define USB_IN_CSR1_IN_PKT_RDY (1<<0) + +/* + * INCSR2 register + */ +#define USB_IN_CSR2_AUTO_SET (1<<7) +#define USB_IN_CSR2_USB_DMA_EN (1<<4) + +/* + * OUT CSR1 register + */ +#define USB_OUT_CSR1_CLR_DATA_REG (1<<7) +#define USB_OUT_CSR1_SENT_STALL (1<<6) +#define USB_OUT_CSR1_SEND_STALL (1<<5) +#define USB_OUT_CSR1_FIFO_FLUSH (1<<4) +#define USB_OUT_CSR1_FIFO_FULL (1<<1) +#define USB_OUT_CSR1_OUT_PKT_RDY (1<<0) + +/* + * OUT CSR2 register + */ +#define USB_OUT_CSR2_AUTO_CLR (1<<7) +#define USB_OUT_CSR2_USB_DMA_EN (1<<4) + +/* + * EP0 CSR + */ +#define EP0_CLR_SETUP_END (1<<7) /* Clear "Setup Ends" Bit (w) */ +#define EP0_CLR_OUT (1<<6) /* Clear "Out packet ready" Bit (w) */ +#define EP0_SEND_STALL (1<<5) /* Send STALL Handshake (rw) */ +#define EP0_SETUP_END (1<<4) /* Setup Ends (r) */ + +#define EP0_DATA_END (1<<3) /* Data end (rw) */ +#define EP0_SENT_STALL (1<<2) /* Sent Stall Handshake (r) */ +#define EP0_IN_PKT_RDY (1<<1) /* In packet ready (rw) */ +#define EP0_OUT_PKT_RDY (1<<0) /* Out packet ready (r) */ + +/* general CSR */ +#define OUT_PKT_RDY (1<<0) +#define IN_PKT_RDY (1<<0) + +/* + * IN/OUT MAXP register + */ +#define USB_OUT_MAXP_MAXP (0xF) +#define USB_IN_MAXP_MAXP (0xF) + +// Max packet size +//#define EP0_PACKETSIZE 0x10 +#define EP0_PACKETSIZE 0x8 +#define EP0_MAXPACKETSIZE 0x10 + +#define UDC_MAX_ENDPOINTS 4 + +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 + +/* ********************************************************************************************* */ +/* IO + */ + +typedef enum ep_type { + ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt +} ep_type_t; + +struct lh7a40x_ep { + struct usb_ep ep; + struct lh7a40x_udc *dev; + + const struct usb_endpoint_descriptor *desc; + struct list_head queue; + unsigned long pio_irqs; + + u8 stopped; + u8 bEndpointAddress; + u8 bmAttributes; + + ep_type_t ep_type; + u32 fifo; + u32 csr1; + u32 csr2; +}; + +struct lh7a40x_request { + struct usb_request req; + struct list_head queue; +}; + +struct lh7a40x_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct device *dev; + spinlock_t lock; + + int ep0state; + struct lh7a40x_ep ep[UDC_MAX_ENDPOINTS]; + + unsigned char usb_address; + + unsigned req_pending:1, req_std:1, req_config:1; +}; + +extern struct lh7a40x_udc *the_controller; + +#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN)==USB_DIR_IN) +#define ep_index(EP) ((EP)->bEndpointAddress&0xF) +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) + +#endif diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h new file mode 100644 index 0000000..c553bbf6 --- /dev/null +++ b/drivers/usb/gadget/ndis.h @@ -0,0 +1,217 @@ +/* + * ndis.h + * + * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de> + * + * Thanks to the cygwin development team, + * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net> + * + * THIS SOFTWARE IS NOT COPYRIGHTED + * + * This source code is offered for use in the public domain. You may + * use, modify or distribute it freely. + * + * This code is distributed in the hope that it will be useful but + * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY + * DISCLAIMED. This includes but is not limited to warranties of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + */ + +#ifndef _LINUX_NDIS_H +#define _LINUX_NDIS_H + + +#define NDIS_STATUS_MULTICAST_FULL 0xC0010009 +#define NDIS_STATUS_MULTICAST_EXISTS 0xC001000A +#define NDIS_STATUS_MULTICAST_NOT_FOUND 0xC001000B + +enum NDIS_DEVICE_POWER_STATE { + NdisDeviceStateUnspecified = 0, + NdisDeviceStateD0, + NdisDeviceStateD1, + NdisDeviceStateD2, + NdisDeviceStateD3, + NdisDeviceStateMaximum +}; + +struct NDIS_PM_WAKE_UP_CAPABILITIES { + enum NDIS_DEVICE_POWER_STATE MinMagicPacketWakeUp; + enum NDIS_DEVICE_POWER_STATE MinPatternWakeUp; + enum NDIS_DEVICE_POWER_STATE MinLinkChangeWakeUp; +}; + +/* NDIS_PNP_CAPABILITIES.Flags constants */ +#define NDIS_DEVICE_WAKE_UP_ENABLE 0x00000001 +#define NDIS_DEVICE_WAKE_ON_PATTERN_MATCH_ENABLE 0x00000002 +#define NDIS_DEVICE_WAKE_ON_MAGIC_PACKET_ENABLE 0x00000004 + +struct NDIS_PNP_CAPABILITIES { + u32 Flags; + struct NDIS_PM_WAKE_UP_CAPABILITIES WakeUpCapabilities; +}; + +struct NDIS_PM_PACKET_PATTERN { + u32 Priority; + u32 Reserved; + u32 MaskSize; + u32 PatternOffset; + u32 PatternSize; + u32 PatternFlags; +}; + + +/* Required Object IDs (OIDs) */ +#define OID_GEN_SUPPORTED_LIST 0x00010101 +#define OID_GEN_HARDWARE_STATUS 0x00010102 +#define OID_GEN_MEDIA_SUPPORTED 0x00010103 +#define OID_GEN_MEDIA_IN_USE 0x00010104 +#define OID_GEN_MAXIMUM_LOOKAHEAD 0x00010105 +#define OID_GEN_MAXIMUM_FRAME_SIZE 0x00010106 +#define OID_GEN_LINK_SPEED 0x00010107 +#define OID_GEN_TRANSMIT_BUFFER_SPACE 0x00010108 +#define OID_GEN_RECEIVE_BUFFER_SPACE 0x00010109 +#define OID_GEN_TRANSMIT_BLOCK_SIZE 0x0001010A +#define OID_GEN_RECEIVE_BLOCK_SIZE 0x0001010B +#define OID_GEN_VENDOR_ID 0x0001010C +#define OID_GEN_VENDOR_DESCRIPTION 0x0001010D +#define OID_GEN_CURRENT_PACKET_FILTER 0x0001010E +#define OID_GEN_CURRENT_LOOKAHEAD 0x0001010F +#define OID_GEN_DRIVER_VERSION 0x00010110 +#define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111 +#define OID_GEN_PROTOCOL_OPTIONS 0x00010112 +#define OID_GEN_MAC_OPTIONS 0x00010113 +#define OID_GEN_MEDIA_CONNECT_STATUS 0x00010114 +#define OID_GEN_MAXIMUM_SEND_PACKETS 0x00010115 +#define OID_GEN_VENDOR_DRIVER_VERSION 0x00010116 +#define OID_GEN_SUPPORTED_GUIDS 0x00010117 +#define OID_GEN_NETWORK_LAYER_ADDRESSES 0x00010118 +#define OID_GEN_TRANSPORT_HEADER_OFFSET 0x00010119 +#define OID_GEN_MACHINE_NAME 0x0001021A +#define OID_GEN_RNDIS_CONFIG_PARAMETER 0x0001021B +#define OID_GEN_VLAN_ID 0x0001021C + +/* Optional OIDs */ +#define OID_GEN_MEDIA_CAPABILITIES 0x00010201 +#define OID_GEN_PHYSICAL_MEDIUM 0x00010202 + +/* Required statistics OIDs */ +#define OID_GEN_XMIT_OK 0x00020101 +#define OID_GEN_RCV_OK 0x00020102 +#define OID_GEN_XMIT_ERROR 0x00020103 +#define OID_GEN_RCV_ERROR 0x00020104 +#define OID_GEN_RCV_NO_BUFFER 0x00020105 + +/* Optional statistics OIDs */ +#define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 +#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202 +#define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 +#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204 +#define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 +#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206 +#define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 +#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 +#define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 +#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A +#define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B +#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C +#define OID_GEN_RCV_CRC_ERROR 0x0002020D +#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E +#define OID_GEN_GET_TIME_CAPS 0x0002020F +#define OID_GEN_GET_NETCARD_TIME 0x00020210 +#define OID_GEN_NETCARD_LOAD 0x00020211 +#define OID_GEN_DEVICE_PROFILE 0x00020212 +#define OID_GEN_INIT_TIME_MS 0x00020213 +#define OID_GEN_RESET_COUNTS 0x00020214 +#define OID_GEN_MEDIA_SENSE_COUNTS 0x00020215 +#define OID_GEN_FRIENDLY_NAME 0x00020216 +#define OID_GEN_MINIPORT_INFO 0x00020217 +#define OID_GEN_RESET_VERIFY_PARAMETERS 0x00020218 + +/* IEEE 802.3 (Ethernet) OIDs */ +#define NDIS_802_3_MAC_OPTION_PRIORITY 0x00000001 + +#define OID_802_3_PERMANENT_ADDRESS 0x01010101 +#define OID_802_3_CURRENT_ADDRESS 0x01010102 +#define OID_802_3_MULTICAST_LIST 0x01010103 +#define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 +#define OID_802_3_MAC_OPTIONS 0x01010105 +#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 +#define OID_802_3_XMIT_ONE_COLLISION 0x01020102 +#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 +#define OID_802_3_XMIT_DEFERRED 0x01020201 +#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202 +#define OID_802_3_RCV_OVERRUN 0x01020203 +#define OID_802_3_XMIT_UNDERRUN 0x01020204 +#define OID_802_3_XMIT_HEARTBEAT_FAILURE 0x01020205 +#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206 +#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207 + +/* OID_GEN_MINIPORT_INFO constants */ +#define NDIS_MINIPORT_BUS_MASTER 0x00000001 +#define NDIS_MINIPORT_WDM_DRIVER 0x00000002 +#define NDIS_MINIPORT_SG_LIST 0x00000004 +#define NDIS_MINIPORT_SUPPORTS_MEDIA_QUERY 0x00000008 +#define NDIS_MINIPORT_INDICATES_PACKETS 0x00000010 +#define NDIS_MINIPORT_IGNORE_PACKET_QUEUE 0x00000020 +#define NDIS_MINIPORT_IGNORE_REQUEST_QUEUE 0x00000040 +#define NDIS_MINIPORT_IGNORE_TOKEN_RING_ERRORS 0x00000080 +#define NDIS_MINIPORT_INTERMEDIATE_DRIVER 0x00000100 +#define NDIS_MINIPORT_IS_NDIS_5 0x00000200 +#define NDIS_MINIPORT_IS_CO 0x00000400 +#define NDIS_MINIPORT_DESERIALIZE 0x00000800 +#define NDIS_MINIPORT_REQUIRES_MEDIA_POLLING 0x00001000 +#define NDIS_MINIPORT_SUPPORTS_MEDIA_SENSE 0x00002000 +#define NDIS_MINIPORT_NETBOOT_CARD 0x00004000 +#define NDIS_MINIPORT_PM_SUPPORTED 0x00008000 +#define NDIS_MINIPORT_SUPPORTS_MAC_ADDRESS_OVERWRITE 0x00010000 +#define NDIS_MINIPORT_USES_SAFE_BUFFER_APIS 0x00020000 +#define NDIS_MINIPORT_HIDDEN 0x00040000 +#define NDIS_MINIPORT_SWENUM 0x00080000 +#define NDIS_MINIPORT_SURPRISE_REMOVE_OK 0x00100000 +#define NDIS_MINIPORT_NO_HALT_ON_SUSPEND 0x00200000 +#define NDIS_MINIPORT_HARDWARE_DEVICE 0x00400000 +#define NDIS_MINIPORT_SUPPORTS_CANCEL_SEND_PACKETS 0x00800000 +#define NDIS_MINIPORT_64BITS_DMA 0x01000000 + +#define NDIS_MEDIUM_802_3 0x00000000 +#define NDIS_MEDIUM_802_5 0x00000001 +#define NDIS_MEDIUM_FDDI 0x00000002 +#define NDIS_MEDIUM_WAN 0x00000003 +#define NDIS_MEDIUM_LOCAL_TALK 0x00000004 +#define NDIS_MEDIUM_DIX 0x00000005 +#define NDIS_MEDIUM_ARCENT_RAW 0x00000006 +#define NDIS_MEDIUM_ARCENT_878_2 0x00000007 +#define NDIS_MEDIUM_ATM 0x00000008 +#define NDIS_MEDIUM_WIRELESS_LAN 0x00000009 +#define NDIS_MEDIUM_IRDA 0x0000000A +#define NDIS_MEDIUM_BPC 0x0000000B +#define NDIS_MEDIUM_CO_WAN 0x0000000C +#define NDIS_MEDIUM_1394 0x0000000D + +#define NDIS_PACKET_TYPE_DIRECTED 0x00000001 +#define NDIS_PACKET_TYPE_MULTICAST 0x00000002 +#define NDIS_PACKET_TYPE_ALL_MULTICAST 0x00000004 +#define NDIS_PACKET_TYPE_BROADCAST 0x00000008 +#define NDIS_PACKET_TYPE_SOURCE_ROUTING 0x00000010 +#define NDIS_PACKET_TYPE_PROMISCUOUS 0x00000020 +#define NDIS_PACKET_TYPE_SMT 0x00000040 +#define NDIS_PACKET_TYPE_ALL_LOCAL 0x00000080 +#define NDIS_PACKET_TYPE_GROUP 0x00000100 +#define NDIS_PACKET_TYPE_ALL_FUNCTIONAL 0x00000200 +#define NDIS_PACKET_TYPE_FUNCTIONAL 0x00000400 +#define NDIS_PACKET_TYPE_MAC_FRAME 0x00000800 + +#define NDIS_MEDIA_STATE_CONNECTED 0x00000000 +#define NDIS_MEDIA_STATE_DISCONNECTED 0x00000001 + +#define NDIS_MAC_OPTION_COPY_LOOKAHEAD_DATA 0x00000001 +#define NDIS_MAC_OPTION_RECEIVE_SERIALIZED 0x00000002 +#define NDIS_MAC_OPTION_TRANSFERS_NOT_PEND 0x00000004 +#define NDIS_MAC_OPTION_NO_LOOPBACK 0x00000008 +#define NDIS_MAC_OPTION_FULL_DUPLEX 0x00000010 +#define NDIS_MAC_OPTION_EOTX_INDICATION 0x00000020 +#define NDIS_MAC_OPTION_8021P_PRIORITY 0x00000040 +#define NDIS_MAC_OPTION_RESERVED 0x80000000 + +#endif /* _LINUX_NDIS_H */ diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c new file mode 100644 index 0000000..e5457f20 --- /dev/null +++ b/drivers/usb/gadget/net2280.c @@ -0,0 +1,2967 @@ +/* + * Driver for the PLX NET2280 USB device controller. + * Specs and errata are available from <http://www.plxtech.com>. + * + * PLX Technology Inc. (formerly NetChip Technology) supported the + * development of this driver. + * + * + * CODE STATUS HIGHLIGHTS + * + * This driver should work well with most "gadget" drivers, including + * the File Storage, Serial, and Ethernet/RNDIS gadget drivers + * as well as Gadget Zero and Gadgetfs. + * + * DMA is enabled by default. Drivers using transfer queues might use + * DMA chaining to remove IRQ latencies between transfers. (Except when + * short OUT transfers happen.) Drivers can use the req->no_interrupt + * hint to completely eliminate some IRQs, if a later IRQ is guaranteed + * and DMA chaining is enabled. + * + * Note that almost all the errata workarounds here are only needed for + * rev1 chips. Rev1a silicon (0110) fixes almost all of them. + */ + +/* + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003-2005 PLX Technology, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef DEBUG /* messages on error and most fault paths */ +#undef VERBOSE /* extra debug messages (success too) */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> + + +#define DRIVER_DESC "PLX NET2280 USB Peripheral Controller" +#define DRIVER_VERSION "2005 Feb 03" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) +#define EP_DONTUSE 13 /* nonzero */ + +#define USE_RDK_LEDS /* GPIO pins control three LEDs */ + + +static const char driver_name [] = "net2280"; +static const char driver_desc [] = DRIVER_DESC; + +static const char ep0name [] = "ep0"; +static const char *ep_name [] = { + ep0name, + "ep-a", "ep-b", "ep-c", "ep-d", + "ep-e", "ep-f", +}; + +/* use_dma -- general goodness, fewer interrupts, less cpu load (vs PIO) + * use_dma_chaining -- dma descriptor queueing gives even more irq reduction + * + * The net2280 DMA engines are not tightly integrated with their FIFOs; + * not all cases are (yet) handled well in this driver or the silicon. + * Some gadget drivers work better with the dma support here than others. + * These two parameters let you use PIO or more aggressive DMA. + */ +static int use_dma = 1; +static int use_dma_chaining = 0; + +/* "modprobe net2280 use_dma=n" etc */ +module_param (use_dma, bool, S_IRUGO); +module_param (use_dma_chaining, bool, S_IRUGO); + + +/* mode 0 == ep-{a,b,c,d} 1K fifo each + * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable + * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable + */ +static ushort fifo_mode = 0; + +/* "modprobe net2280 fifo_mode=1" etc */ +module_param (fifo_mode, ushort, 0644); + +/* enable_suspend -- When enabled, the driver will respond to + * USB suspend requests by powering down the NET2280. Otherwise, + * USB suspend requests will be ignored. This is acceptible for + * self-powered devices, and helps avoid some quirks. + */ +static int enable_suspend = 0; + +/* "modprobe net2280 enable_suspend=1" etc */ +module_param (enable_suspend, bool, S_IRUGO); + + +#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out") + +#if defined(CONFIG_USB_GADGET_DEBUG_FILES) || defined (DEBUG) +static char *type_string (u8 bmAttributes) +{ + switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: return "bulk"; + case USB_ENDPOINT_XFER_ISOC: return "iso"; + case USB_ENDPOINT_XFER_INT: return "intr"; + }; + return "control"; +} +#endif + +#include "net2280.h" + +#define valid_bit __constant_cpu_to_le32 (1 << VALID_BIT) +#define dma_done_ie __constant_cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE) + +/*-------------------------------------------------------------------------*/ + +static int +net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct net2280 *dev; + struct net2280_ep *ep; + u32 max, tmp; + unsigned long flags; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* erratum 0119 workaround ties up an endpoint number */ + if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) + return -EDOM; + + /* sanity check ep-e/ep-f since their fifos are small */ + max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff; + if (ep->num > 4 && max > 64) + return -ERANGE; + + spin_lock_irqsave (&dev->lock, flags); + _ep->maxpacket = max & 0x7ff; + ep->desc = desc; + + /* ep_reset() has already been called */ + ep->stopped = 0; + ep->out_overflow = 0; + + /* set speed-dependent max packet; may kick in high bandwidth */ + set_idx_reg (dev->regs, REG_EP_MAXPKT (dev, ep->num), max); + + /* FIFO lines can't go to different packets. PIO is ok, so + * use it instead of troublesome (non-bulk) multi-packet DMA. + */ + if (ep->dma && (max % 4) != 0 && use_dma_chaining) { + DEBUG (ep->dev, "%s, no dma for maxpacket %d\n", + ep->ep.name, ep->ep.maxpacket); + ep->dma = NULL; + } + + /* set type, direction, address; reset fifo counters */ + writel ((1 << FIFO_FLUSH), &ep->regs->ep_stat); + tmp = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + if (tmp == USB_ENDPOINT_XFER_INT) { + /* erratum 0105 workaround prevents hs NYET */ + if (dev->chiprev == 0100 + && dev->gadget.speed == USB_SPEED_HIGH + && !(desc->bEndpointAddress & USB_DIR_IN)) + writel ((1 << CLEAR_NAK_OUT_PACKETS_MODE), + &ep->regs->ep_rsp); + } else if (tmp == USB_ENDPOINT_XFER_BULK) { + /* catch some particularly blatant driver bugs */ + if ((dev->gadget.speed == USB_SPEED_HIGH + && max != 512) + || (dev->gadget.speed == USB_SPEED_FULL + && max > 64)) { + spin_unlock_irqrestore (&dev->lock, flags); + return -ERANGE; + } + } + ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0; + tmp <<= ENDPOINT_TYPE; + tmp |= desc->bEndpointAddress; + tmp |= (4 << ENDPOINT_BYTE_COUNT); /* default full fifo lines */ + tmp |= 1 << ENDPOINT_ENABLE; + wmb (); + + /* for OUT transfers, block the rx fifo until a read is posted */ + ep->is_in = (tmp & USB_DIR_IN) != 0; + if (!ep->is_in) + writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + + writel (tmp, &ep->regs->ep_cfg); + + /* enable irqs */ + if (!ep->dma) { /* pio, per-packet */ + tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); + writel (tmp, &dev->regs->pciirqenb0); + + tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) + | readl (&ep->regs->ep_irqenb); + writel (tmp, &ep->regs->ep_irqenb); + } else { /* dma, per-request */ + tmp = (1 << (8 + ep->num)); /* completion */ + tmp |= readl (&dev->regs->pciirqenb1); + writel (tmp, &dev->regs->pciirqenb1); + + /* for short OUT transfers, dma completions can't + * advance the queue; do it pio-style, by hand. + * NOTE erratum 0112 workaround #2 + */ + if ((desc->bEndpointAddress & USB_DIR_IN) == 0) { + tmp = (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE); + writel (tmp, &ep->regs->ep_irqenb); + + tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); + writel (tmp, &dev->regs->pciirqenb0); + } + } + + tmp = desc->bEndpointAddress; + DEBUG (dev, "enabled %s (ep%d%s-%s) %s max %04x\n", + _ep->name, tmp & 0x0f, DIR_STRING (tmp), + type_string (desc->bmAttributes), + ep->dma ? "dma" : "pio", max); + + /* pci writes may still be posted */ + spin_unlock_irqrestore (&dev->lock, flags); + return 0; +} + +static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec) +{ + u32 result; + + do { + result = readl (ptr); + if (result == ~(u32)0) /* "device unplugged" */ + return -ENODEV; + result &= mask; + if (result == done) + return 0; + udelay (1); + usec--; + } while (usec > 0); + return -ETIMEDOUT; +} + +static struct usb_ep_ops net2280_ep_ops; + +static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) +{ + u32 tmp; + + ep->desc = NULL; + INIT_LIST_HEAD (&ep->queue); + + ep->ep.maxpacket = ~0; + ep->ep.ops = &net2280_ep_ops; + + /* disable the dma, irqs, endpoint... */ + if (ep->dma) { + writel (0, &ep->dma->dmactl); + writel ( (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT) + | (1 << DMA_TRANSACTION_DONE_INTERRUPT) + | (1 << DMA_ABORT) + , &ep->dma->dmastat); + + tmp = readl (®s->pciirqenb0); + tmp &= ~(1 << ep->num); + writel (tmp, ®s->pciirqenb0); + } else { + tmp = readl (®s->pciirqenb1); + tmp &= ~(1 << (8 + ep->num)); /* completion */ + writel (tmp, ®s->pciirqenb1); + } + writel (0, &ep->regs->ep_irqenb); + + /* init to our chosen defaults, notably so that we NAK OUT + * packets until the driver queues a read (+note erratum 0112) + */ + tmp = (1 << SET_NAK_OUT_PACKETS_MODE) + | (1 << SET_NAK_OUT_PACKETS) + | (1 << CLEAR_EP_HIDE_STATUS_PHASE) + | (1 << CLEAR_INTERRUPT_MODE); + + if (ep->num != 0) { + tmp |= (1 << CLEAR_ENDPOINT_TOGGLE) + | (1 << CLEAR_ENDPOINT_HALT); + } + writel (tmp, &ep->regs->ep_rsp); + + /* scrub most status bits, and flush any fifo state */ + writel ( (1 << TIMEOUT) + | (1 << USB_STALL_SENT) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_OUT_PING_NAK_SENT) + | (1 << USB_OUT_ACK_SENT) + | (1 << FIFO_OVERFLOW) + | (1 << FIFO_UNDERFLOW) + | (1 << FIFO_FLUSH) + | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT) + , &ep->regs->ep_stat); + + /* fifo size is handled separately */ +} + +static void nuke (struct net2280_ep *); + +static int net2280_disable (struct usb_ep *_ep) +{ + struct net2280_ep *ep; + unsigned long flags; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || !ep->desc || _ep->name == ep0name) + return -EINVAL; + + spin_lock_irqsave (&ep->dev->lock, flags); + nuke (ep); + ep_reset (ep->dev->regs, ep); + + VDEBUG (ep->dev, "disabled %s %s\n", + ep->dma ? "dma" : "pio", _ep->name); + + /* synch memory views with the device */ + (void) readl (&ep->regs->ep_cfg); + + if (use_dma && !ep->dma && ep->num >= 1 && ep->num <= 4) + ep->dma = &ep->dev->dma [ep->num - 1]; + + spin_unlock_irqrestore (&ep->dev->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +net2280_alloc_request (struct usb_ep *_ep, int gfp_flags) +{ + struct net2280_ep *ep; + struct net2280_request *req; + + if (!_ep) + return NULL; + ep = container_of (_ep, struct net2280_ep, ep); + + req = kmalloc (sizeof *req, gfp_flags); + if (!req) + return NULL; + + memset (req, 0, sizeof *req); + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD (&req->queue); + + /* this dma descriptor may be swapped with the previous dummy */ + if (ep->dma) { + struct net2280_dma *td; + + td = pci_pool_alloc (ep->dev->requests, gfp_flags, + &req->td_dma); + if (!td) { + kfree (req); + return NULL; + } + td->dmacount = 0; /* not VALID */ + td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); + td->dmadesc = td->dmaaddr; + req->td = td; + } + return &req->req; +} + +static void +net2280_free_request (struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2280_ep *ep; + struct net2280_request *req; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || !_req) + return; + + req = container_of (_req, struct net2280_request, req); + WARN_ON (!list_empty (&req->queue)); + if (req->td) + pci_pool_free (ep->dev->requests, req->td, req->td_dma); + kfree (req); +} + +/*-------------------------------------------------------------------------*/ + +#undef USE_KMALLOC + +/* many common platforms have dma-coherent caches, which means that it's + * safe to use kmalloc() memory for all i/o buffers without using any + * cache flushing calls. (unless you're trying to share cache lines + * between dma and non-dma activities, which is a slow idea in any case.) + * + * other platforms need more care, with 2.5 having a moderately general + * solution (which falls down for allocations smaller than one page) + * that improves significantly on the 2.4 PCI allocators by removing + * the restriction that memory never be freed in_interrupt(). + */ +#if defined(CONFIG_X86) +#define USE_KMALLOC + +#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) +#define USE_KMALLOC + +#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO) +#define USE_KMALLOC + +/* FIXME there are other cases, including an x86-64 one ... */ +#endif + +/* allocating buffers this way eliminates dma mapping overhead, which + * on some platforms will mean eliminating a per-io buffer copy. with + * some kinds of system caches, further tweaks may still be needed. + */ +static void * +net2280_alloc_buffer ( + struct usb_ep *_ep, + unsigned bytes, + dma_addr_t *dma, + int gfp_flags +) +{ + void *retval; + struct net2280_ep *ep; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep) + return NULL; + *dma = DMA_ADDR_INVALID; + +#if defined(USE_KMALLOC) + retval = kmalloc(bytes, gfp_flags); + if (retval) + *dma = virt_to_phys(retval); +#else + if (ep->dma) { + /* the main problem with this call is that it wastes memory + * on typical 1/N page allocations: it allocates 1-N pages. + */ +#warning Using dma_alloc_coherent even with buffers smaller than a page. + retval = dma_alloc_coherent(&ep->dev->pdev->dev, + bytes, dma, gfp_flags); + } else + retval = kmalloc(bytes, gfp_flags); +#endif + return retval; +} + +static void +net2280_free_buffer ( + struct usb_ep *_ep, + void *buf, + dma_addr_t dma, + unsigned bytes +) { + /* free memory into the right allocator */ +#ifndef USE_KMALLOC + if (dma != DMA_ADDR_INVALID) { + struct net2280_ep *ep; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep) + return; + dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma); + } else +#endif + kfree (buf); +} + +/*-------------------------------------------------------------------------*/ + +/* load a packet into the fifo we use for usb IN transfers. + * works for all endpoints. + * + * NOTE: pio with ep-a..ep-d could stuff multiple packets into the fifo + * at a time, but this code is simpler because it knows it only writes + * one packet. ep-a..ep-d should use dma instead. + */ +static void +write_fifo (struct net2280_ep *ep, struct usb_request *req) +{ + struct net2280_ep_regs __iomem *regs = ep->regs; + u8 *buf; + u32 tmp; + unsigned count, total; + + /* INVARIANT: fifo is currently empty. (testable) */ + + if (req) { + buf = req->buf + req->actual; + prefetch (buf); + total = req->length - req->actual; + } else { + total = 0; + buf = NULL; + } + + /* write just one packet at a time */ + count = ep->ep.maxpacket; + if (count > total) /* min() cannot be used on a bitfield */ + count = total; + + VDEBUG (ep->dev, "write %s fifo (IN) %d bytes%s req %p\n", + ep->ep.name, count, + (count != ep->ep.maxpacket) ? " (short)" : "", + req); + while (count >= 4) { + /* NOTE be careful if you try to align these. fifo lines + * should normally be full (4 bytes) and successive partial + * lines are ok only in certain cases. + */ + tmp = get_unaligned ((u32 *)buf); + cpu_to_le32s (&tmp); + writel (tmp, ®s->ep_data); + buf += 4; + count -= 4; + } + + /* last fifo entry is "short" unless we wrote a full packet. + * also explicitly validate last word in (periodic) transfers + * when maxpacket is not a multiple of 4 bytes. + */ + if (count || total < ep->ep.maxpacket) { + tmp = count ? get_unaligned ((u32 *)buf) : count; + cpu_to_le32s (&tmp); + set_fifo_bytecount (ep, count & 0x03); + writel (tmp, ®s->ep_data); + } + + /* pci writes may still be posted */ +} + +/* work around erratum 0106: PCI and USB race over the OUT fifo. + * caller guarantees chiprev 0100, out endpoint is NAKing, and + * there's no real data in the fifo. + * + * NOTE: also used in cases where that erratum doesn't apply: + * where the host wrote "too much" data to us. + */ +static void out_flush (struct net2280_ep *ep) +{ + u32 __iomem *statp; + u32 tmp; + + ASSERT_OUT_NAKING (ep); + + statp = &ep->regs->ep_stat; + writel ( (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + , statp); + writel ((1 << FIFO_FLUSH), statp); + mb (); + tmp = readl (statp); + if (tmp & (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + /* high speed did bulk NYET; fifo isn't filling */ + && ep->dev->gadget.speed == USB_SPEED_FULL) { + unsigned usec; + + usec = 50; /* 64 byte bulk/interrupt */ + handshake (statp, (1 << USB_OUT_PING_NAK_SENT), + (1 << USB_OUT_PING_NAK_SENT), usec); + /* NAK done; now CLEAR_NAK_OUT_PACKETS is safe */ + } +} + +/* unload packet(s) from the fifo we use for usb OUT transfers. + * returns true iff the request completed, because of short packet + * or the request buffer having filled with full packets. + * + * for ep-a..ep-d this will read multiple packets out when they + * have been accepted. + */ +static int +read_fifo (struct net2280_ep *ep, struct net2280_request *req) +{ + struct net2280_ep_regs __iomem *regs = ep->regs; + u8 *buf = req->req.buf + req->req.actual; + unsigned count, tmp, is_short; + unsigned cleanup = 0, prevent = 0; + + /* erratum 0106 ... packets coming in during fifo reads might + * be incompletely rejected. not all cases have workarounds. + */ + if (ep->dev->chiprev == 0x0100 + && ep->dev->gadget.speed == USB_SPEED_FULL) { + udelay (1); + tmp = readl (&ep->regs->ep_stat); + if ((tmp & (1 << NAK_OUT_PACKETS))) + cleanup = 1; + else if ((tmp & (1 << FIFO_FULL))) { + start_out_naking (ep); + prevent = 1; + } + /* else: hope we don't see the problem */ + } + + /* never overflow the rx buffer. the fifo reads packets until + * it sees a short one; we might not be ready for them all. + */ + prefetchw (buf); + count = readl (®s->ep_avail); + if (unlikely (count == 0)) { + udelay (1); + tmp = readl (&ep->regs->ep_stat); + count = readl (®s->ep_avail); + /* handled that data already? */ + if (count == 0 && (tmp & (1 << NAK_OUT_PACKETS)) == 0) + return 0; + } + + tmp = req->req.length - req->req.actual; + if (count > tmp) { + /* as with DMA, data overflow gets flushed */ + if ((tmp % ep->ep.maxpacket) != 0) { + ERROR (ep->dev, + "%s out fifo %d bytes, expected %d\n", + ep->ep.name, count, tmp); + req->req.status = -EOVERFLOW; + cleanup = 1; + /* NAK_OUT_PACKETS will be set, so flushing is safe; + * the next read will start with the next packet + */ + } /* else it's a ZLP, no worries */ + count = tmp; + } + req->req.actual += count; + + is_short = (count == 0) || ((count % ep->ep.maxpacket) != 0); + + VDEBUG (ep->dev, "read %s fifo (OUT) %d bytes%s%s%s req %p %d/%d\n", + ep->ep.name, count, is_short ? " (short)" : "", + cleanup ? " flush" : "", prevent ? " nak" : "", + req, req->req.actual, req->req.length); + + while (count >= 4) { + tmp = readl (®s->ep_data); + cpu_to_le32s (&tmp); + put_unaligned (tmp, (u32 *)buf); + buf += 4; + count -= 4; + } + if (count) { + tmp = readl (®s->ep_data); + /* LE conversion is implicit here: */ + do { + *buf++ = (u8) tmp; + tmp >>= 8; + } while (--count); + } + if (cleanup) + out_flush (ep); + if (prevent) { + writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + (void) readl (&ep->regs->ep_rsp); + } + + return is_short || ((req->req.actual == req->req.length) + && !req->req.zero); +} + +/* fill out dma descriptor to match a given request */ +static void +fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid) +{ + struct net2280_dma *td = req->td; + u32 dmacount = req->req.length; + + /* don't let DMA continue after a short OUT packet, + * so overruns can't affect the next transfer. + * in case of overruns on max-size packets, we can't + * stop the fifo from filling but we can flush it. + */ + if (ep->is_in) + dmacount |= (1 << DMA_DIRECTION); + else if ((dmacount % ep->ep.maxpacket) != 0) + dmacount |= (1 << END_OF_CHAIN); + + req->valid = valid; + if (valid) + dmacount |= (1 << VALID_BIT); + if (likely(!req->req.no_interrupt || !use_dma_chaining)) + dmacount |= (1 << DMA_DONE_INTERRUPT_ENABLE); + + /* td->dmadesc = previously set by caller */ + td->dmaaddr = cpu_to_le32 (req->req.dma); + + /* 2280 may be polling VALID_BIT through ep->dma->dmadesc */ + wmb (); + td->dmacount = cpu_to_le32p (&dmacount); +} + +static const u32 dmactl_default = + (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT) + | (1 << DMA_CLEAR_COUNT_ENABLE) + /* erratum 0116 workaround part 1 (use POLLING) */ + | (POLL_100_USEC << DESCRIPTOR_POLLING_RATE) + | (1 << DMA_VALID_BIT_POLLING_ENABLE) + | (1 << DMA_VALID_BIT_ENABLE) + | (1 << DMA_SCATTER_GATHER_ENABLE) + /* erratum 0116 workaround part 2 (no AUTOSTART) */ + | (1 << DMA_ENABLE); + +static inline void spin_stop_dma (struct net2280_dma_regs __iomem *dma) +{ + handshake (&dma->dmactl, (1 << DMA_ENABLE), 0, 50); +} + +static inline void stop_dma (struct net2280_dma_regs __iomem *dma) +{ + writel (readl (&dma->dmactl) & ~(1 << DMA_ENABLE), &dma->dmactl); + spin_stop_dma (dma); +} + +static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma) +{ + struct net2280_dma_regs __iomem *dma = ep->dma; + + writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION), + &dma->dmacount); + writel (readl (&dma->dmastat), &dma->dmastat); + + writel (td_dma, &dma->dmadesc); + writel (dmactl, &dma->dmactl); + + /* erratum 0116 workaround part 3: pci arbiter away from net2280 */ + (void) readl (&ep->dev->pci->pcimstctl); + + writel ((1 << DMA_START), &dma->dmastat); + + if (!ep->is_in) + stop_out_naking (ep); +} + +static void start_dma (struct net2280_ep *ep, struct net2280_request *req) +{ + u32 tmp; + struct net2280_dma_regs __iomem *dma = ep->dma; + + /* FIXME can't use DMA for ZLPs */ + + /* on this path we "know" there's no dma active (yet) */ + WARN_ON (readl (&dma->dmactl) & (1 << DMA_ENABLE)); + writel (0, &ep->dma->dmactl); + + /* previous OUT packet might have been short */ + if (!ep->is_in && ((tmp = readl (&ep->regs->ep_stat)) + & (1 << NAK_OUT_PACKETS)) != 0) { + writel ((1 << SHORT_PACKET_TRANSFERRED_INTERRUPT), + &ep->regs->ep_stat); + + tmp = readl (&ep->regs->ep_avail); + if (tmp) { + writel (readl (&dma->dmastat), &dma->dmastat); + + /* transfer all/some fifo data */ + writel (req->req.dma, &dma->dmaaddr); + tmp = min (tmp, req->req.length); + + /* dma irq, faking scatterlist status */ + req->td->dmacount = cpu_to_le32 (req->req.length - tmp); + writel ((1 << DMA_DONE_INTERRUPT_ENABLE) + | tmp, &dma->dmacount); + req->td->dmadesc = 0; + req->valid = 1; + + writel ((1 << DMA_ENABLE), &dma->dmactl); + writel ((1 << DMA_START), &dma->dmastat); + return; + } + } + + tmp = dmactl_default; + + /* force packet boundaries between dma requests, but prevent the + * controller from automagically writing a last "short" packet + * (zero length) unless the driver explicitly said to do that. + */ + if (ep->is_in) { + if (likely ((req->req.length % ep->ep.maxpacket) != 0 + || req->req.zero)) { + tmp |= (1 << DMA_FIFO_VALIDATE); + ep->in_fifo_validate = 1; + } else + ep->in_fifo_validate = 0; + } + + /* init req->td, pointing to the current dummy */ + req->td->dmadesc = cpu_to_le32 (ep->td_dma); + fill_dma_desc (ep, req, 1); + + if (!use_dma_chaining) + req->td->dmacount |= __constant_cpu_to_le32 (1 << END_OF_CHAIN); + + start_queue (ep, tmp, req->td_dma); +} + +static inline void +queue_dma (struct net2280_ep *ep, struct net2280_request *req, int valid) +{ + struct net2280_dma *end; + dma_addr_t tmp; + + /* swap new dummy for old, link; fill and maybe activate */ + end = ep->dummy; + ep->dummy = req->td; + req->td = end; + + tmp = ep->td_dma; + ep->td_dma = req->td_dma; + req->td_dma = tmp; + + end->dmadesc = cpu_to_le32 (ep->td_dma); + + fill_dma_desc (ep, req, valid); +} + +static void +done (struct net2280_ep *ep, struct net2280_request *req, int status) +{ + struct net2280 *dev; + unsigned stopped = ep->stopped; + + list_del_init (&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + if (req->mapped) { + pci_unmap_single (dev->pdev, req->req.dma, req->req.length, + ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } + + if (status && status != -ESHUTDOWN) + VDEBUG (dev, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock (&dev->lock); + req->req.complete (&ep->ep, &req->req); + spin_lock (&dev->lock); + ep->stopped = stopped; +} + +/*-------------------------------------------------------------------------*/ + +static int +net2280_queue (struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +{ + struct net2280_request *req; + struct net2280_ep *ep; + struct net2280 *dev; + unsigned long flags; + + /* we always require a cpu-view buffer, so that we can + * always use pio (as fallback or whatever). + */ + req = container_of (_req, struct net2280_request, req); + if (!_req || !_req->complete || !_req->buf + || !list_empty (&req->queue)) + return -EINVAL; + if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) + return -EDOM; + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* FIXME implement PIO fallback for ZLPs with DMA */ + if (ep->dma && _req->length == 0) + return -EOPNOTSUPP; + + /* set up dma mapping in case the caller didn't */ + if (ep->dma && _req->dma == DMA_ADDR_INVALID) { + _req->dma = pci_map_single (dev->pdev, _req->buf, _req->length, + ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + req->mapped = 1; + } + +#if 0 + VDEBUG (dev, "%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); +#endif + + spin_lock_irqsave (&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty (&ep->queue) && !ep->stopped) { + /* use DMA if the endpoint supports it, else pio */ + if (ep->dma) + start_dma (ep, req); + else { + /* maybe there's no control data, just status ack */ + if (ep->num == 0 && _req->length == 0) { + allow_status (ep); + done (ep, req, 0); + VDEBUG (dev, "%s status ack\n", ep->ep.name); + goto done; + } + + /* PIO ... stuff the fifo, or unblock it. */ + if (ep->is_in) + write_fifo (ep, _req); + else if (list_empty (&ep->queue)) { + u32 s; + + /* OUT FIFO might have packet(s) buffered */ + s = readl (&ep->regs->ep_stat); + if ((s & (1 << FIFO_EMPTY)) == 0) { + /* note: _req->short_not_ok is + * ignored here since PIO _always_ + * stops queue advance here, and + * _req->status doesn't change for + * short reads (only _req->actual) + */ + if (read_fifo (ep, req)) { + done (ep, req, 0); + if (ep->num == 0) + allow_status (ep); + /* don't queue it */ + req = NULL; + } else + s = readl (&ep->regs->ep_stat); + } + + /* don't NAK, let the fifo fill */ + if (req && (s & (1 << NAK_OUT_PACKETS))) + writel ((1 << CLEAR_NAK_OUT_PACKETS), + &ep->regs->ep_rsp); + } + } + + } else if (ep->dma) { + int valid = 1; + + if (ep->is_in) { + int expect; + + /* preventing magic zlps is per-engine state, not + * per-transfer; irq logic must recover hiccups. + */ + expect = likely (req->req.zero + || (req->req.length % ep->ep.maxpacket) != 0); + if (expect != ep->in_fifo_validate) + valid = 0; + } + queue_dma (ep, req, valid); + + } /* else the irq handler advances the queue. */ + + if (req) + list_add_tail (&req->queue, &ep->queue); +done: + spin_unlock_irqrestore (&dev->lock, flags); + + /* pci writes may still be posted */ + return 0; +} + +static inline void +dma_done ( + struct net2280_ep *ep, + struct net2280_request *req, + u32 dmacount, + int status +) +{ + req->req.actual = req->req.length - (DMA_BYTE_COUNT_MASK & dmacount); + done (ep, req, status); +} + +static void restart_dma (struct net2280_ep *ep); + +static void scan_dma_completions (struct net2280_ep *ep) +{ + /* only look at descriptors that were "naturally" retired, + * so fifo and list head state won't matter + */ + while (!list_empty (&ep->queue)) { + struct net2280_request *req; + u32 tmp; + + req = list_entry (ep->queue.next, + struct net2280_request, queue); + if (!req->valid) + break; + rmb (); + tmp = le32_to_cpup (&req->td->dmacount); + if ((tmp & (1 << VALID_BIT)) != 0) + break; + + /* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short" + * cases where DMA must be aborted; this code handles + * all non-abort DMA completions. + */ + if (unlikely (req->td->dmadesc == 0)) { + /* paranoia */ + tmp = readl (&ep->dma->dmacount); + if (tmp & DMA_BYTE_COUNT_MASK) + break; + /* single transfer mode */ + dma_done (ep, req, tmp, 0); + break; + } else if (!ep->is_in + && (req->req.length % ep->ep.maxpacket) != 0) { + tmp = readl (&ep->regs->ep_stat); + + /* AVOID TROUBLE HERE by not issuing short reads from + * your gadget driver. That helps avoids errata 0121, + * 0122, and 0124; not all cases trigger the warning. + */ + if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { + WARN (ep->dev, "%s lost packet sync!\n", + ep->ep.name); + req->req.status = -EOVERFLOW; + } else if ((tmp = readl (&ep->regs->ep_avail)) != 0) { + /* fifo gets flushed later */ + ep->out_overflow = 1; + DEBUG (ep->dev, "%s dma, discard %d len %d\n", + ep->ep.name, tmp, + req->req.length); + req->req.status = -EOVERFLOW; + } + } + dma_done (ep, req, tmp, 0); + } +} + +static void restart_dma (struct net2280_ep *ep) +{ + struct net2280_request *req; + u32 dmactl = dmactl_default; + + if (ep->stopped) + return; + req = list_entry (ep->queue.next, struct net2280_request, queue); + + if (!use_dma_chaining) { + start_dma (ep, req); + return; + } + + /* the 2280 will be processing the queue unless queue hiccups after + * the previous transfer: + * IN: wanted automagic zlp, head doesn't (or vice versa) + * DMA_FIFO_VALIDATE doesn't init from dma descriptors. + * OUT: was "usb-short", we must restart. + */ + if (ep->is_in && !req->valid) { + struct net2280_request *entry, *prev = NULL; + int reqmode, done = 0; + + DEBUG (ep->dev, "%s dma hiccup td %p\n", ep->ep.name, req->td); + ep->in_fifo_validate = likely (req->req.zero + || (req->req.length % ep->ep.maxpacket) != 0); + if (ep->in_fifo_validate) + dmactl |= (1 << DMA_FIFO_VALIDATE); + list_for_each_entry (entry, &ep->queue, queue) { + u32 dmacount; + + if (entry == req) + continue; + dmacount = entry->td->dmacount; + if (!done) { + reqmode = likely (entry->req.zero + || (entry->req.length + % ep->ep.maxpacket) != 0); + if (reqmode == ep->in_fifo_validate) { + entry->valid = 1; + dmacount |= valid_bit; + entry->td->dmacount = dmacount; + prev = entry; + continue; + } else { + /* force a hiccup */ + prev->td->dmacount |= dma_done_ie; + done = 1; + } + } + + /* walk the rest of the queue so unlinks behave */ + entry->valid = 0; + dmacount &= ~valid_bit; + entry->td->dmacount = dmacount; + prev = entry; + } + } + + writel (0, &ep->dma->dmactl); + start_queue (ep, dmactl, req->td_dma); +} + +static void abort_dma (struct net2280_ep *ep) +{ + /* abort the current transfer */ + if (likely (!list_empty (&ep->queue))) { + /* FIXME work around errata 0121, 0122, 0124 */ + writel ((1 << DMA_ABORT), &ep->dma->dmastat); + spin_stop_dma (ep->dma); + } else + stop_dma (ep->dma); + scan_dma_completions (ep); +} + +/* dequeue ALL requests */ +static void nuke (struct net2280_ep *ep) +{ + struct net2280_request *req; + + /* called with spinlock held */ + ep->stopped = 1; + if (ep->dma) + abort_dma (ep); + while (!list_empty (&ep->queue)) { + req = list_entry (ep->queue.next, + struct net2280_request, + queue); + done (ep, req, -ESHUTDOWN); + } +} + +/* dequeue JUST ONE request */ +static int net2280_dequeue (struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2280_ep *ep; + struct net2280_request *req; + unsigned long flags; + u32 dmactl; + int stopped; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0) || !_req) + return -EINVAL; + + spin_lock_irqsave (&ep->dev->lock, flags); + stopped = ep->stopped; + + /* quiesce dma while we patch the queue */ + dmactl = 0; + ep->stopped = 1; + if (ep->dma) { + dmactl = readl (&ep->dma->dmactl); + /* WARNING erratum 0127 may kick in ... */ + stop_dma (ep->dma); + scan_dma_completions (ep); + } + + /* make sure it's still queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore (&ep->dev->lock, flags); + return -EINVAL; + } + + /* queue head may be partially complete. */ + if (ep->queue.next == &req->queue) { + if (ep->dma) { + DEBUG (ep->dev, "unlink (%s) dma\n", _ep->name); + _req->status = -ECONNRESET; + abort_dma (ep); + if (likely (ep->queue.next == &req->queue)) { + // NOTE: misreports single-transfer mode + req->td->dmacount = 0; /* invalidate */ + dma_done (ep, req, + readl (&ep->dma->dmacount), + -ECONNRESET); + } + } else { + DEBUG (ep->dev, "unlink (%s) pio\n", _ep->name); + done (ep, req, -ECONNRESET); + } + req = NULL; + + /* patch up hardware chaining data */ + } else if (ep->dma && use_dma_chaining) { + if (req->queue.prev == ep->queue.next) { + writel (le32_to_cpu (req->td->dmadesc), + &ep->dma->dmadesc); + if (req->td->dmacount & dma_done_ie) + writel (readl (&ep->dma->dmacount) + | dma_done_ie, + &ep->dma->dmacount); + } else { + struct net2280_request *prev; + + prev = list_entry (req->queue.prev, + struct net2280_request, queue); + prev->td->dmadesc = req->td->dmadesc; + if (req->td->dmacount & dma_done_ie) + prev->td->dmacount |= dma_done_ie; + } + } + + if (req) + done (ep, req, -ECONNRESET); + ep->stopped = stopped; + + if (ep->dma) { + /* turn off dma on inactive queues */ + if (list_empty (&ep->queue)) + stop_dma (ep->dma); + else if (!ep->stopped) { + /* resume current request, or start new one */ + if (req) + writel (dmactl, &ep->dma->dmactl); + else + start_dma (ep, list_entry (ep->queue.next, + struct net2280_request, queue)); + } + } + + spin_unlock_irqrestore (&ep->dev->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int net2280_fifo_status (struct usb_ep *_ep); + +static int +net2280_set_halt (struct usb_ep *_ep, int value) +{ + struct net2280_ep *ep; + unsigned long flags; + int retval = 0; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03) + == USB_ENDPOINT_XFER_ISOC) + return -EINVAL; + + spin_lock_irqsave (&ep->dev->lock, flags); + if (!list_empty (&ep->queue)) + retval = -EAGAIN; + else if (ep->is_in && value && net2280_fifo_status (_ep) != 0) + retval = -EAGAIN; + else { + VDEBUG (ep->dev, "%s %s halt\n", _ep->name, + value ? "set" : "clear"); + /* set/clear, then synch memory views with the device */ + if (value) { + if (ep->num == 0) + ep->dev->protocol_stall = 1; + else + set_halt (ep); + } else + clear_halt (ep); + (void) readl (&ep->regs->ep_rsp); + } + spin_unlock_irqrestore (&ep->dev->lock, flags); + + return retval; +} + +static int +net2280_fifo_status (struct usb_ep *_ep) +{ + struct net2280_ep *ep; + u32 avail; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -ENODEV; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + avail = readl (&ep->regs->ep_avail) & ((1 << 12) - 1); + if (avail > ep->fifo_size) + return -EOVERFLOW; + if (ep->is_in) + avail = ep->fifo_size - avail; + return avail; +} + +static void +net2280_fifo_flush (struct usb_ep *_ep) +{ + struct net2280_ep *ep; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return; + + writel ((1 << FIFO_FLUSH), &ep->regs->ep_stat); + (void) readl (&ep->regs->ep_rsp); +} + +static struct usb_ep_ops net2280_ep_ops = { + .enable = net2280_enable, + .disable = net2280_disable, + + .alloc_request = net2280_alloc_request, + .free_request = net2280_free_request, + + .alloc_buffer = net2280_alloc_buffer, + .free_buffer = net2280_free_buffer, + + .queue = net2280_queue, + .dequeue = net2280_dequeue, + + .set_halt = net2280_set_halt, + .fifo_status = net2280_fifo_status, + .fifo_flush = net2280_fifo_flush, +}; + +/*-------------------------------------------------------------------------*/ + +static int net2280_get_frame (struct usb_gadget *_gadget) +{ + struct net2280 *dev; + unsigned long flags; + u16 retval; + + if (!_gadget) + return -ENODEV; + dev = container_of (_gadget, struct net2280, gadget); + spin_lock_irqsave (&dev->lock, flags); + retval = get_idx_reg (dev->regs, REG_FRAME) & 0x03ff; + spin_unlock_irqrestore (&dev->lock, flags); + return retval; +} + +static int net2280_wakeup (struct usb_gadget *_gadget) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of (_gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + tmp = readl (&dev->usb->usbctl); + if (tmp & (1 << DEVICE_REMOTE_WAKEUP_ENABLE)) + writel (1 << GENERATE_RESUME, &dev->usb->usbstat); + spin_unlock_irqrestore (&dev->lock, flags); + + /* pci writes may still be posted */ + return 0; +} + +static int net2280_set_selfpowered (struct usb_gadget *_gadget, int value) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of (_gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + tmp = readl (&dev->usb->usbctl); + if (value) + tmp |= (1 << SELF_POWERED_STATUS); + else + tmp &= ~(1 << SELF_POWERED_STATUS); + writel (tmp, &dev->usb->usbctl); + spin_unlock_irqrestore (&dev->lock, flags); + + return 0; +} + +static int net2280_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return -ENODEV; + dev = container_of (_gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + tmp = readl (&dev->usb->usbctl); + dev->softconnect = (is_on != 0); + if (is_on) + tmp |= (1 << USB_DETECT_ENABLE); + else + tmp &= ~(1 << USB_DETECT_ENABLE); + writel (tmp, &dev->usb->usbctl); + spin_unlock_irqrestore (&dev->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops net2280_ops = { + .get_frame = net2280_get_frame, + .wakeup = net2280_wakeup, + .set_selfpowered = net2280_set_selfpowered, + .pullup = net2280_pullup, +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +/* FIXME move these into procfs, and use seq_file. + * Sysfs _still_ doesn't behave for arbitrarily sized files, + * and also doesn't help products using this with 2.4 kernels. + */ + +/* "function" sysfs attribute */ +static ssize_t +show_function (struct device *_dev, char *buf) +{ + struct net2280 *dev = dev_get_drvdata (_dev); + + if (!dev->driver + || !dev->driver->function + || strlen (dev->driver->function) > PAGE_SIZE) + return 0; + return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); +} +static DEVICE_ATTR (function, S_IRUGO, show_function, NULL); + +static ssize_t +show_registers (struct device *_dev, char *buf) +{ + struct net2280 *dev; + char *next; + unsigned size, t; + unsigned long flags; + int i; + u32 t1, t2; + char *s; + + dev = dev_get_drvdata (_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave (&dev->lock, flags); + + if (dev->driver) + s = dev->driver->driver.name; + else + s = "(none)"; + + /* Main Control Registers */ + t = scnprintf (next, size, "%s version " DRIVER_VERSION + ", chiprev %04x, dma %s\n\n" + "devinit %03x fifoctl %08x gadget '%s'\n" + "pci irqenb0 %02x irqenb1 %08x " + "irqstat0 %04x irqstat1 %08x\n", + driver_name, dev->chiprev, + use_dma + ? (use_dma_chaining ? "chaining" : "enabled") + : "disabled", + readl (&dev->regs->devinit), + readl (&dev->regs->fifoctl), + s, + readl (&dev->regs->pciirqenb0), + readl (&dev->regs->pciirqenb1), + readl (&dev->regs->irqstat0), + readl (&dev->regs->irqstat1)); + size -= t; + next += t; + + /* USB Control Registers */ + t1 = readl (&dev->usb->usbctl); + t2 = readl (&dev->usb->usbstat); + if (t1 & (1 << VBUS_PIN)) { + if (t2 & (1 << HIGH_SPEED)) + s = "high speed"; + else if (dev->gadget.speed == USB_SPEED_UNKNOWN) + s = "powered"; + else + s = "full speed"; + /* full speed bit (6) not working?? */ + } else + s = "not attached"; + t = scnprintf (next, size, + "stdrsp %08x usbctl %08x usbstat %08x " + "addr 0x%02x (%s)\n", + readl (&dev->usb->stdrsp), t1, t2, + readl (&dev->usb->ouraddr), s); + size -= t; + next += t; + + /* PCI Master Control Registers */ + + /* DMA Control Registers */ + + /* Configurable EP Control Registers */ + for (i = 0; i < 7; i++) { + struct net2280_ep *ep; + + ep = &dev->ep [i]; + if (i && !ep->desc) + continue; + + t1 = readl (&ep->regs->ep_cfg); + t2 = readl (&ep->regs->ep_rsp) & 0xff; + t = scnprintf (next, size, + "\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s" + "irqenb %02x\n", + ep->ep.name, t1, t2, + (t2 & (1 << CLEAR_NAK_OUT_PACKETS)) + ? "NAK " : "", + (t2 & (1 << CLEAR_EP_HIDE_STATUS_PHASE)) + ? "hide " : "", + (t2 & (1 << CLEAR_EP_FORCE_CRC_ERROR)) + ? "CRC " : "", + (t2 & (1 << CLEAR_INTERRUPT_MODE)) + ? "interrupt " : "", + (t2 & (1<<CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)) + ? "status " : "", + (t2 & (1 << CLEAR_NAK_OUT_PACKETS_MODE)) + ? "NAKmode " : "", + (t2 & (1 << CLEAR_ENDPOINT_TOGGLE)) + ? "DATA1 " : "DATA0 ", + (t2 & (1 << CLEAR_ENDPOINT_HALT)) + ? "HALT " : "", + readl (&ep->regs->ep_irqenb)); + size -= t; + next += t; + + t = scnprintf (next, size, + "\tstat %08x avail %04x " + "(ep%d%s-%s)%s\n", + readl (&ep->regs->ep_stat), + readl (&ep->regs->ep_avail), + t1 & 0x0f, DIR_STRING (t1), + type_string (t1 >> 8), + ep->stopped ? "*" : ""); + size -= t; + next += t; + + if (!ep->dma) + continue; + + t = scnprintf (next, size, + " dma\tctl %08x stat %08x count %08x\n" + "\taddr %08x desc %08x\n", + readl (&ep->dma->dmactl), + readl (&ep->dma->dmastat), + readl (&ep->dma->dmacount), + readl (&ep->dma->dmaaddr), + readl (&ep->dma->dmadesc)); + size -= t; + next += t; + + } + + /* Indexed Registers */ + // none yet + + /* Statistics */ + t = scnprintf (next, size, "\nirqs: "); + size -= t; + next += t; + for (i = 0; i < 7; i++) { + struct net2280_ep *ep; + + ep = &dev->ep [i]; + if (i && !ep->irqs) + continue; + t = scnprintf (next, size, " %s/%lu", ep->ep.name, ep->irqs); + size -= t; + next += t; + + } + t = scnprintf (next, size, "\n"); + size -= t; + next += t; + + spin_unlock_irqrestore (&dev->lock, flags); + + return PAGE_SIZE - size; +} +static DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL); + +static ssize_t +show_queues (struct device *_dev, char *buf) +{ + struct net2280 *dev; + char *next; + unsigned size; + unsigned long flags; + int i; + + dev = dev_get_drvdata (_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave (&dev->lock, flags); + + for (i = 0; i < 7; i++) { + struct net2280_ep *ep = &dev->ep [i]; + struct net2280_request *req; + int t; + + if (i != 0) { + const struct usb_endpoint_descriptor *d; + + d = ep->desc; + if (!d) + continue; + t = d->bEndpointAddress; + t = scnprintf (next, size, + "\n%s (ep%d%s-%s) max %04x %s fifo %d\n", + ep->ep.name, t & USB_ENDPOINT_NUMBER_MASK, + (t & USB_DIR_IN) ? "in" : "out", + ({ char *val; + switch (d->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_BULK: + val = "bulk"; break; + case USB_ENDPOINT_XFER_INT: + val = "intr"; break; + default: + val = "iso"; break; + }; val; }), + le16_to_cpu (d->wMaxPacketSize) & 0x1fff, + ep->dma ? "dma" : "pio", ep->fifo_size + ); + } else /* ep0 should only have one transfer queued */ + t = scnprintf (next, size, "ep0 max 64 pio %s\n", + ep->is_in ? "in" : "out"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (list_empty (&ep->queue)) { + t = scnprintf (next, size, "\t(nothing queued)\n"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + continue; + } + list_for_each_entry (req, &ep->queue, queue) { + if (ep->dma && req->td_dma == readl (&ep->dma->dmadesc)) + t = scnprintf (next, size, + "\treq %p len %d/%d " + "buf %p (dmacount %08x)\n", + &req->req, req->req.actual, + req->req.length, req->req.buf, + readl (&ep->dma->dmacount)); + else + t = scnprintf (next, size, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (ep->dma) { + struct net2280_dma *td; + + td = req->td; + t = scnprintf (next, size, "\t td %08x " + " count %08x buf %08x desc %08x\n", + (u32) req->td_dma, + le32_to_cpu (td->dmacount), + le32_to_cpu (td->dmaaddr), + le32_to_cpu (td->dmadesc)); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + } + } + } + +done: + spin_unlock_irqrestore (&dev->lock, flags); + return PAGE_SIZE - size; +} +static DEVICE_ATTR (queues, S_IRUGO, show_queues, NULL); + + +#else + +#define device_create_file(a,b) do {} while (0) +#define device_remove_file device_create_file + +#endif + +/*-------------------------------------------------------------------------*/ + +/* another driver-specific mode might be a request type doing dma + * to/from another device fifo instead of to/from memory. + */ + +static void set_fifo_mode (struct net2280 *dev, int mode) +{ + /* keeping high bits preserves BAR2 */ + writel ((0xffff << PCI_BASE2_RANGE) | mode, &dev->regs->fifoctl); + + /* always ep-{a,b,e,f} ... maybe not ep-c or ep-d */ + INIT_LIST_HEAD (&dev->gadget.ep_list); + list_add_tail (&dev->ep [1].ep.ep_list, &dev->gadget.ep_list); + list_add_tail (&dev->ep [2].ep.ep_list, &dev->gadget.ep_list); + switch (mode) { + case 0: + list_add_tail (&dev->ep [3].ep.ep_list, &dev->gadget.ep_list); + list_add_tail (&dev->ep [4].ep.ep_list, &dev->gadget.ep_list); + dev->ep [1].fifo_size = dev->ep [2].fifo_size = 1024; + break; + case 1: + dev->ep [1].fifo_size = dev->ep [2].fifo_size = 2048; + break; + case 2: + list_add_tail (&dev->ep [3].ep.ep_list, &dev->gadget.ep_list); + dev->ep [1].fifo_size = 2048; + dev->ep [2].fifo_size = 1024; + break; + } + /* fifo sizes for ep0, ep-c, ep-d, ep-e, and ep-f never change */ + list_add_tail (&dev->ep [5].ep.ep_list, &dev->gadget.ep_list); + list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list); +} + +/** + * net2280_set_fifo_mode - change allocation of fifo buffers + * @gadget: access to the net2280 device that will be updated + * @mode: 0 for default, four 1kB buffers (ep-a through ep-d); + * 1 for two 2kB buffers (ep-a and ep-b only); + * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c). + * + * returns zero on success, else negative errno. when this succeeds, + * the contents of gadget->ep_list may have changed. + * + * you may only call this function when endpoints a-d are all disabled. + * use it whenever extra hardware buffering can help performance, such + * as before enabling "high bandwidth" interrupt endpoints that use + * maxpacket bigger than 512 (when double buffering would otherwise + * be unavailable). + */ +int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode) +{ + int i; + struct net2280 *dev; + int status = 0; + unsigned long flags; + + if (!gadget) + return -ENODEV; + dev = container_of (gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + + for (i = 1; i <= 4; i++) + if (dev->ep [i].desc) { + status = -EINVAL; + break; + } + if (mode < 0 || mode > 2) + status = -EINVAL; + if (status == 0) + set_fifo_mode (dev, mode); + spin_unlock_irqrestore (&dev->lock, flags); + + if (status == 0) { + if (mode == 1) + DEBUG (dev, "fifo: ep-a 2K, ep-b 2K\n"); + else if (mode == 2) + DEBUG (dev, "fifo: ep-a 2K, ep-b 1K, ep-c 1K\n"); + /* else all are 1K */ + } + return status; +} +EXPORT_SYMBOL (net2280_set_fifo_mode); + +/*-------------------------------------------------------------------------*/ + +/* keeping it simple: + * - one bus driver, initted first; + * - one function driver, initted second + * + * most of the work to support multiple net2280 controllers would + * be to associate this gadget driver (yes?) with all of them, or + * perhaps to bind specific drivers to specific devices. + */ + +static struct net2280 *the_controller; + +static void usb_reset (struct net2280 *dev) +{ + u32 tmp; + + dev->gadget.speed = USB_SPEED_UNKNOWN; + (void) readl (&dev->usb->usbctl); + + net2280_led_init (dev); + + /* disable automatic responses, and irqs */ + writel (0, &dev->usb->stdrsp); + writel (0, &dev->regs->pciirqenb0); + writel (0, &dev->regs->pciirqenb1); + + /* clear old dma and irq state */ + for (tmp = 0; tmp < 4; tmp++) { + struct net2280_ep *ep = &dev->ep [tmp + 1]; + + if (ep->dma) + abort_dma (ep); + } + writel (~0, &dev->regs->irqstat0), + writel (~(1 << SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1), + + /* reset, and enable pci */ + tmp = readl (&dev->regs->devinit) + | (1 << PCI_ENABLE) + | (1 << FIFO_SOFT_RESET) + | (1 << USB_SOFT_RESET) + | (1 << M8051_RESET); + writel (tmp, &dev->regs->devinit); + + /* standard fifo and endpoint allocations */ + set_fifo_mode (dev, (fifo_mode <= 2) ? fifo_mode : 0); +} + +static void usb_reinit (struct net2280 *dev) +{ + u32 tmp; + int init_dma; + + /* use_dma changes are ignored till next device re-init */ + init_dma = use_dma; + + /* basic endpoint init */ + for (tmp = 0; tmp < 7; tmp++) { + struct net2280_ep *ep = &dev->ep [tmp]; + + ep->ep.name = ep_name [tmp]; + ep->dev = dev; + ep->num = tmp; + + if (tmp > 0 && tmp <= 4) { + ep->fifo_size = 1024; + if (init_dma) + ep->dma = &dev->dma [tmp - 1]; + } else + ep->fifo_size = 64; + ep->regs = &dev->epregs [tmp]; + ep_reset (dev->regs, ep); + } + dev->ep [0].ep.maxpacket = 64; + dev->ep [5].ep.maxpacket = 64; + dev->ep [6].ep.maxpacket = 64; + + dev->gadget.ep0 = &dev->ep [0].ep; + dev->ep [0].stopped = 0; + INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + + /* we want to prevent lowlevel/insecure access from the USB host, + * but erratum 0119 means this enable bit is ignored + */ + for (tmp = 0; tmp < 5; tmp++) + writel (EP_DONTUSE, &dev->dep [tmp].dep_cfg); +} + +static void ep0_start (struct net2280 *dev) +{ + writel ( (1 << CLEAR_EP_HIDE_STATUS_PHASE) + | (1 << CLEAR_NAK_OUT_PACKETS) + | (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) + , &dev->epregs [0].ep_rsp); + + /* + * hardware optionally handles a bunch of standard requests + * that the API hides from drivers anyway. have it do so. + * endpoint status/features are handled in software, to + * help pass tests for some dubious behavior. + */ + writel ( (1 << SET_TEST_MODE) + | (1 << SET_ADDRESS) + | (1 << DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP) + | (1 << GET_DEVICE_STATUS) + | (1 << GET_INTERFACE_STATUS) + , &dev->usb->stdrsp); + writel ( (1 << USB_ROOT_PORT_WAKEUP_ENABLE) + | (1 << SELF_POWERED_USB_DEVICE) + | (1 << REMOTE_WAKEUP_SUPPORT) + | (dev->softconnect << USB_DETECT_ENABLE) + | (1 << SELF_POWERED_STATUS) + , &dev->usb->usbctl); + + /* enable irqs so we can see ep0 and general operation */ + writel ( (1 << SETUP_PACKET_INTERRUPT_ENABLE) + | (1 << ENDPOINT_0_INTERRUPT_ENABLE) + , &dev->regs->pciirqenb0); + writel ( (1 << PCI_INTERRUPT_ENABLE) + | (1 << PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE) + | (1 << PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE) + | (1 << PCI_RETRY_ABORT_INTERRUPT_ENABLE) + | (1 << VBUS_INTERRUPT_ENABLE) + | (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) + | (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) + , &dev->regs->pciirqenb1); + + /* don't leave any writes posted */ + (void) readl (&dev->usb->usbctl); +} + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +int usb_gadget_register_driver (struct usb_gadget_driver *driver) +{ + struct net2280 *dev = the_controller; + int retval; + unsigned i; + + /* insist on high speed support from the driver, since + * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) + * "must not be used in normal operation" + */ + if (!driver + || driver->speed != USB_SPEED_HIGH + || !driver->bind + || !driver->unbind + || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + for (i = 0; i < 7; i++) + dev->ep [i].irqs = 0; + + /* hook up the driver ... */ + dev->softconnect = 1; + driver->driver.bus = NULL; + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + retval = driver->bind (&dev->gadget); + if (retval) { + DEBUG (dev, "bind to driver %s --> %d\n", + driver->driver.name, retval); + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + return retval; + } + + device_create_file (&dev->pdev->dev, &dev_attr_function); + device_create_file (&dev->pdev->dev, &dev_attr_queues); + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + net2280_led_active (dev, 1); + ep0_start (dev); + + DEBUG (dev, "%s ready, usbctl %08x stdrsp %08x\n", + driver->driver.name, + readl (&dev->usb->usbctl), + readl (&dev->usb->stdrsp)); + + /* pci writes may still be posted */ + return 0; +} +EXPORT_SYMBOL (usb_gadget_register_driver); + +static void +stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect if it's not connected */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + /* stop hardware; prevent new request submissions; + * and kill any outstanding requests. + */ + usb_reset (dev); + for (i = 0; i < 7; i++) + nuke (&dev->ep [i]); + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock (&dev->lock); + driver->disconnect (&dev->gadget); + spin_lock (&dev->lock); + } + + usb_reinit (dev); +} + +int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) +{ + struct net2280 *dev = the_controller; + unsigned long flags; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + + spin_lock_irqsave (&dev->lock, flags); + stop_activity (dev, driver); + spin_unlock_irqrestore (&dev->lock, flags); + + net2280_pullup (&dev->gadget, 0); + + driver->unbind (&dev->gadget); + dev->gadget.dev.driver = NULL; + dev->driver = NULL; + + net2280_led_active (dev, 0); + device_remove_file (&dev->pdev->dev, &dev_attr_function); + device_remove_file (&dev->pdev->dev, &dev_attr_queues); + + DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name); + return 0; +} +EXPORT_SYMBOL (usb_gadget_unregister_driver); + + +/*-------------------------------------------------------------------------*/ + +/* handle ep0, ep-e, ep-f with 64 byte packets: packet per irq. + * also works for dma-capable endpoints, in pio mode or just + * to manually advance the queue after short OUT transfers. + */ +static void handle_ep_small (struct net2280_ep *ep) +{ + struct net2280_request *req; + u32 t; + /* 0 error, 1 mid-data, 2 done */ + int mode = 1; + + if (!list_empty (&ep->queue)) + req = list_entry (ep->queue.next, + struct net2280_request, queue); + else + req = NULL; + + /* ack all, and handle what we care about */ + t = readl (&ep->regs->ep_stat); + ep->irqs++; +#if 0 + VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n", + ep->ep.name, t, req ? &req->req : 0); +#endif + writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat); + + /* for ep0, monitor token irqs to catch data stage length errors + * and to synchronize on status. + * + * also, to defer reporting of protocol stalls ... here's where + * data or status first appears, handling stalls here should never + * cause trouble on the host side.. + * + * control requests could be slightly faster without token synch for + * status, but status can jam up that way. + */ + if (unlikely (ep->num == 0)) { + if (ep->is_in) { + /* status; stop NAKing */ + if (t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt (ep); + } + if (!req) + allow_status (ep); + mode = 2; + /* reply to extra IN data tokens with a zlp */ + } else if (t & (1 << DATA_IN_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt (ep); + mode = 2; + } else if (!req && ep->stopped) + write_fifo (ep, NULL); + } + } else { + /* status; stop NAKing */ + if (t & (1 << DATA_IN_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt (ep); + } + mode = 2; + /* an extra OUT token is an error */ + } else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) + && req + && req->req.actual == req->req.length) + || !req) { + ep->dev->protocol_stall = 1; + set_halt (ep); + ep->stopped = 1; + if (req) + done (ep, req, -EOVERFLOW); + req = NULL; + } + } + } + + if (unlikely (!req)) + return; + + /* manual DMA queue advance after short OUT */ + if (likely (ep->dma != 0)) { + if (t & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) { + u32 count; + int stopped = ep->stopped; + + /* TRANSFERRED works around OUT_DONE erratum 0112. + * we expect (N <= maxpacket) bytes; host wrote M. + * iff (M < N) we won't ever see a DMA interrupt. + */ + ep->stopped = 1; + for (count = 0; ; t = readl (&ep->regs->ep_stat)) { + + /* any preceding dma transfers must finish. + * dma handles (M >= N), may empty the queue + */ + scan_dma_completions (ep); + if (unlikely (list_empty (&ep->queue) + || ep->out_overflow)) { + req = NULL; + break; + } + req = list_entry (ep->queue.next, + struct net2280_request, queue); + + /* here either (M < N), a "real" short rx; + * or (M == N) and the queue didn't empty + */ + if (likely (t & (1 << FIFO_EMPTY))) { + count = readl (&ep->dma->dmacount); + count &= DMA_BYTE_COUNT_MASK; + if (readl (&ep->dma->dmadesc) + != req->td_dma) + req = NULL; + break; + } + udelay(1); + } + + /* stop DMA, leave ep NAKing */ + writel ((1 << DMA_ABORT), &ep->dma->dmastat); + spin_stop_dma (ep->dma); + + if (likely (req)) { + req->td->dmacount = 0; + t = readl (&ep->regs->ep_avail); + dma_done (ep, req, count, t); + } + + /* also flush to prevent erratum 0106 trouble */ + if (unlikely (ep->out_overflow + || (ep->dev->chiprev == 0x0100 + && ep->dev->gadget.speed + == USB_SPEED_FULL))) { + out_flush (ep); + ep->out_overflow = 0; + } + + /* (re)start dma if needed, stop NAKing */ + ep->stopped = stopped; + if (!list_empty (&ep->queue)) + restart_dma (ep); + } else + DEBUG (ep->dev, "%s dma ep_stat %08x ??\n", + ep->ep.name, t); + return; + + /* data packet(s) received (in the fifo, OUT) */ + } else if (t & (1 << DATA_PACKET_RECEIVED_INTERRUPT)) { + if (read_fifo (ep, req) && ep->num != 0) + mode = 2; + + /* data packet(s) transmitted (IN) */ + } else if (t & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) { + unsigned len; + + len = req->req.length - req->req.actual; + if (len > ep->ep.maxpacket) + len = ep->ep.maxpacket; + req->req.actual += len; + + /* if we wrote it all, we're usually done */ + if (req->req.actual == req->req.length) { + if (ep->num == 0) { + /* wait for control status */ + if (mode != 2) + req = NULL; + } else if (!req->req.zero || len != ep->ep.maxpacket) + mode = 2; + } + + /* there was nothing to do ... */ + } else if (mode == 1) + return; + + /* done */ + if (mode == 2) { + /* stream endpoints often resubmit/unlink in completion */ + done (ep, req, 0); + + /* maybe advance queue to next request */ + if (ep->num == 0) { + /* NOTE: net2280 could let gadget driver start the + * status stage later. since not all controllers let + * them control that, the api doesn't (yet) allow it. + */ + if (!ep->stopped) + allow_status (ep); + req = NULL; + } else { + if (!list_empty (&ep->queue) && !ep->stopped) + req = list_entry (ep->queue.next, + struct net2280_request, queue); + else + req = NULL; + if (req && !ep->is_in) + stop_out_naking (ep); + } + } + + /* is there a buffer for the next packet? + * for best streaming performance, make sure there is one. + */ + if (req && !ep->stopped) { + + /* load IN fifo with next packet (may be zlp) */ + if (t & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) + write_fifo (ep, &req->req); + } +} + +static struct net2280_ep * +get_ep_by_addr (struct net2280 *dev, u16 wIndex) +{ + struct net2280_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return &dev->ep [0]; + list_for_each_entry (ep, &dev->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + bEndpointAddress = ep->desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f)) + return ep; + } + return NULL; +} + +static void handle_stat0_irqs (struct net2280 *dev, u32 stat) +{ + struct net2280_ep *ep; + u32 num, scratch; + + /* most of these don't need individual acks */ + stat &= ~(1 << INTA_ASSERTED); + if (!stat) + return; + // DEBUG (dev, "irqstat0 %04x\n", stat); + + /* starting a control request? */ + if (unlikely (stat & (1 << SETUP_PACKET_INTERRUPT))) { + union { + u32 raw [2]; + struct usb_ctrlrequest r; + } u; + int tmp = 0; + struct net2280_request *req; + + if (dev->gadget.speed == USB_SPEED_UNKNOWN) { + if (readl (&dev->usb->usbstat) & (1 << HIGH_SPEED)) + dev->gadget.speed = USB_SPEED_HIGH; + else + dev->gadget.speed = USB_SPEED_FULL; + net2280_led_speed (dev, dev->gadget.speed); + DEBUG (dev, "%s speed\n", + (dev->gadget.speed == USB_SPEED_HIGH) + ? "high" : "full"); + } + + ep = &dev->ep [0]; + ep->irqs++; + + /* make sure any leftover request state is cleared */ + stat &= ~(1 << ENDPOINT_0_INTERRUPT); + while (!list_empty (&ep->queue)) { + req = list_entry (ep->queue.next, + struct net2280_request, queue); + done (ep, req, (req->req.actual == req->req.length) + ? 0 : -EPROTO); + } + ep->stopped = 0; + dev->protocol_stall = 0; + writel ( (1 << TIMEOUT) + | (1 << USB_STALL_SENT) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_OUT_PING_NAK_SENT) + | (1 << USB_OUT_ACK_SENT) + | (1 << FIFO_OVERFLOW) + | (1 << FIFO_UNDERFLOW) + | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT) + , &ep->regs->ep_stat); + u.raw [0] = readl (&dev->usb->setup0123); + u.raw [1] = readl (&dev->usb->setup4567); + + cpu_to_le32s (&u.raw [0]); + cpu_to_le32s (&u.raw [1]); + + le16_to_cpus (&u.r.wValue); + le16_to_cpus (&u.r.wIndex); + le16_to_cpus (&u.r.wLength); + + /* ack the irq */ + writel (1 << SETUP_PACKET_INTERRUPT, &dev->regs->irqstat0); + stat ^= (1 << SETUP_PACKET_INTERRUPT); + + /* watch control traffic at the token level, and force + * synchronization before letting the status stage happen. + * FIXME ignore tokens we'll NAK, until driver responds. + * that'll mean a lot less irqs for some drivers. + */ + ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0; + if (ep->is_in) { + scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT); + stop_out_naking (ep); + } else + scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT); + writel (scratch, &dev->epregs [0].ep_irqenb); + + /* we made the hardware handle most lowlevel requests; + * everything else goes uplevel to the gadget code. + */ + switch (u.r.bRequest) { + case USB_REQ_GET_STATUS: { + struct net2280_ep *e; + u16 status; + + /* hw handles device and interface status */ + if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT)) + goto delegate; + if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0 + || u.r.wLength > 2) + goto do_stall; + + if (readl (&e->regs->ep_rsp) + & (1 << SET_ENDPOINT_HALT)) + status = __constant_cpu_to_le16 (1); + else + status = __constant_cpu_to_le16 (0); + + /* don't bother with a request object! */ + writel (0, &dev->epregs [0].ep_irqenb); + set_fifo_bytecount (ep, u.r.wLength); + writel (status, &dev->epregs [0].ep_data); + allow_status (ep); + VDEBUG (dev, "%s stat %02x\n", ep->ep.name, status); + goto next_endpoints; + } + break; + case USB_REQ_CLEAR_FEATURE: { + struct net2280_ep *e; + + /* hw handles device features */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT + || u.r.wLength != 0) + goto do_stall; + if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0) + goto do_stall; + clear_halt (e); + allow_status (ep); + VDEBUG (dev, "%s clear halt\n", ep->ep.name); + goto next_endpoints; + } + break; + case USB_REQ_SET_FEATURE: { + struct net2280_ep *e; + + /* hw handles device features */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT + || u.r.wLength != 0) + goto do_stall; + if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0) + goto do_stall; + set_halt (e); + allow_status (ep); + VDEBUG (dev, "%s set halt\n", ep->ep.name); + goto next_endpoints; + } + break; + default: +delegate: + VDEBUG (dev, "setup %02x.%02x v%04x i%04x " + "ep_cfg %08x\n", + u.r.bRequestType, u.r.bRequest, + u.r.wValue, u.r.wIndex, + readl (&ep->regs->ep_cfg)); + spin_unlock (&dev->lock); + tmp = dev->driver->setup (&dev->gadget, &u.r); + spin_lock (&dev->lock); + } + + /* stall ep0 on error */ + if (tmp < 0) { +do_stall: + VDEBUG (dev, "req %02x.%02x protocol STALL; stat %d\n", + u.r.bRequestType, u.r.bRequest, tmp); + dev->protocol_stall = 1; + } + + /* some in/out token irq should follow; maybe stall then. + * driver must queue a request (even zlp) or halt ep0 + * before the host times out. + */ + } + +next_endpoints: + /* endpoint data irq ? */ + scratch = stat & 0x7f; + stat &= ~0x7f; + for (num = 0; scratch; num++) { + u32 t; + + /* do this endpoint's FIFO and queue need tending? */ + t = 1 << num; + if ((scratch & t) == 0) + continue; + scratch ^= t; + + ep = &dev->ep [num]; + handle_ep_small (ep); + } + + if (stat) + DEBUG (dev, "unhandled irqstat0 %08x\n", stat); +} + +#define DMA_INTERRUPTS ( \ + (1 << DMA_D_INTERRUPT) \ + | (1 << DMA_C_INTERRUPT) \ + | (1 << DMA_B_INTERRUPT) \ + | (1 << DMA_A_INTERRUPT)) +#define PCI_ERROR_INTERRUPTS ( \ + (1 << PCI_MASTER_ABORT_RECEIVED_INTERRUPT) \ + | (1 << PCI_TARGET_ABORT_RECEIVED_INTERRUPT) \ + | (1 << PCI_RETRY_ABORT_INTERRUPT)) + +static void handle_stat1_irqs (struct net2280 *dev, u32 stat) +{ + struct net2280_ep *ep; + u32 tmp, num, mask, scratch; + + /* after disconnect there's nothing else to do! */ + tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT); + mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED); + + /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. + * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and + * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT + * only indicates a change in the reset state). + */ + if (stat & tmp) { + writel (tmp, &dev->regs->irqstat1); + if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && + ((readl (&dev->usb->usbstat) & mask) == 0)) + || ((readl (&dev->usb->usbctl) & (1 << VBUS_PIN)) == 0) + ) && ( dev->gadget.speed != USB_SPEED_UNKNOWN)) { + DEBUG (dev, "disconnect %s\n", + dev->driver->driver.name); + stop_activity (dev, dev->driver); + ep0_start (dev); + return; + } + stat &= ~tmp; + + /* vBUS can bounce ... one of many reasons to ignore the + * notion of hotplug events on bus connect/disconnect! + */ + if (!stat) + return; + } + + /* NOTE: chip stays in PCI D0 state for now, but it could + * enter D1 to save more power + */ + tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT); + if (stat & tmp) { + writel (tmp, &dev->regs->irqstat1); + if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) { + if (dev->driver->suspend) + dev->driver->suspend (&dev->gadget); + if (!enable_suspend) + stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT); + } else { + if (dev->driver->resume) + dev->driver->resume (&dev->gadget); + /* at high speed, note erratum 0133 */ + } + stat &= ~tmp; + } + + /* clear any other status/irqs */ + if (stat) + writel (stat, &dev->regs->irqstat1); + + /* some status we can just ignore */ + stat &= ~((1 << CONTROL_STATUS_INTERRUPT) + | (1 << SUSPEND_REQUEST_INTERRUPT) + | (1 << RESUME_INTERRUPT) + | (1 << SOF_INTERRUPT)); + if (!stat) + return; + // DEBUG (dev, "irqstat1 %08x\n", stat); + + /* DMA status, for ep-{a,b,c,d} */ + scratch = stat & DMA_INTERRUPTS; + stat &= ~DMA_INTERRUPTS; + scratch >>= 9; + for (num = 0; scratch; num++) { + struct net2280_dma_regs __iomem *dma; + + tmp = 1 << num; + if ((tmp & scratch) == 0) + continue; + scratch ^= tmp; + + ep = &dev->ep [num + 1]; + dma = ep->dma; + + if (!dma) + continue; + + /* clear ep's dma status */ + tmp = readl (&dma->dmastat); + writel (tmp, &dma->dmastat); + + /* chaining should stop on abort, short OUT from fifo, + * or (stat0 codepath) short OUT transfer. + */ + if (!use_dma_chaining) { + if ((tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT)) + == 0) { + DEBUG (ep->dev, "%s no xact done? %08x\n", + ep->ep.name, tmp); + continue; + } + stop_dma (ep->dma); + } + + /* OUT transfers terminate when the data from the + * host is in our memory. Process whatever's done. + * On this path, we know transfer's last packet wasn't + * less than req->length. NAK_OUT_PACKETS may be set, + * or the FIFO may already be holding new packets. + * + * IN transfers can linger in the FIFO for a very + * long time ... we ignore that for now, accounting + * precisely (like PIO does) needs per-packet irqs + */ + scan_dma_completions (ep); + + /* disable dma on inactive queues; else maybe restart */ + if (list_empty (&ep->queue)) { + if (use_dma_chaining) + stop_dma (ep->dma); + } else { + tmp = readl (&dma->dmactl); + if (!use_dma_chaining + || (tmp & (1 << DMA_ENABLE)) == 0) + restart_dma (ep); + else if (ep->is_in && use_dma_chaining) { + struct net2280_request *req; + u32 dmacount; + + /* the descriptor at the head of the chain + * may still have VALID_BIT clear; that's + * used to trigger changing DMA_FIFO_VALIDATE + * (affects automagic zlp writes). + */ + req = list_entry (ep->queue.next, + struct net2280_request, queue); + dmacount = req->td->dmacount; + dmacount &= __constant_cpu_to_le32 ( + (1 << VALID_BIT) + | DMA_BYTE_COUNT_MASK); + if (dmacount && (dmacount & valid_bit) == 0) + restart_dma (ep); + } + } + ep->irqs++; + } + + /* NOTE: there are other PCI errors we might usefully notice. + * if they appear very often, here's where to try recovering. + */ + if (stat & PCI_ERROR_INTERRUPTS) { + ERROR (dev, "pci dma error; stat %08x\n", stat); + stat &= ~PCI_ERROR_INTERRUPTS; + /* these are fatal errors, but "maybe" they won't + * happen again ... + */ + stop_activity (dev, dev->driver); + ep0_start (dev); + stat = 0; + } + + if (stat) + DEBUG (dev, "unhandled irqstat1 %08x\n", stat); +} + +static irqreturn_t net2280_irq (int irq, void *_dev, struct pt_regs * r) +{ + struct net2280 *dev = _dev; + + spin_lock (&dev->lock); + + /* handle disconnect, dma, and more */ + handle_stat1_irqs (dev, readl (&dev->regs->irqstat1)); + + /* control requests and PIO */ + handle_stat0_irqs (dev, readl (&dev->regs->irqstat0)); + + spin_unlock (&dev->lock); + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void gadget_release (struct device *_dev) +{ + struct net2280 *dev = dev_get_drvdata (_dev); + + kfree (dev); +} + +/* tear down the binding between this driver and the pci device */ + +static void net2280_remove (struct pci_dev *pdev) +{ + struct net2280 *dev = pci_get_drvdata (pdev); + + /* start with the driver above us */ + if (dev->driver) { + /* should have been done already by driver model core */ + WARN (dev, "pci remove, driver '%s' is still registered\n", + dev->driver->driver.name); + usb_gadget_unregister_driver (dev->driver); + } + + /* then clean up the resources we allocated during probe() */ + net2280_led_shutdown (dev); + if (dev->requests) { + int i; + for (i = 1; i < 5; i++) { + if (!dev->ep [i].dummy) + continue; + pci_pool_free (dev->requests, dev->ep [i].dummy, + dev->ep [i].td_dma); + } + pci_pool_destroy (dev->requests); + } + if (dev->got_irq) + free_irq (pdev->irq, dev); + if (dev->regs) + iounmap (dev->regs); + if (dev->region) + release_mem_region (pci_resource_start (pdev, 0), + pci_resource_len (pdev, 0)); + if (dev->enabled) + pci_disable_device (pdev); + device_unregister (&dev->gadget.dev); + device_remove_file (&pdev->dev, &dev_attr_registers); + pci_set_drvdata (pdev, NULL); + + INFO (dev, "unbind\n"); + + the_controller = NULL; +} + +/* wrap this driver around the specified device, but + * don't respond over USB until a gadget driver binds to us. + */ + +static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net2280 *dev; + unsigned long resource, len; + void __iomem *base = NULL; + int retval, i; + char buf [8], *bufp; + + /* if you want to support more than one controller in a system, + * usb_gadget_driver_{register,unregister}() must change. + */ + if (the_controller) { + dev_warn (&pdev->dev, "ignoring\n"); + return -EBUSY; + } + + /* alloc, and start init */ + dev = kmalloc (sizeof *dev, SLAB_KERNEL); + if (dev == NULL){ + retval = -ENOMEM; + goto done; + } + + memset (dev, 0, sizeof *dev); + spin_lock_init (&dev->lock); + dev->pdev = pdev; + dev->gadget.ops = &net2280_ops; + dev->gadget.is_dualspeed = 1; + + /* the "gadget" abstracts/virtualizes the controller */ + strcpy (dev->gadget.dev.bus_id, "gadget"); + dev->gadget.dev.parent = &pdev->dev; + dev->gadget.dev.dma_mask = pdev->dev.dma_mask; + dev->gadget.dev.release = gadget_release; + dev->gadget.name = driver_name; + + /* now all the pci goodies ... */ + if (pci_enable_device (pdev) < 0) { + retval = -ENODEV; + goto done; + } + dev->enabled = 1; + + /* BAR 0 holds all the registers + * BAR 1 is 8051 memory; unused here (note erratum 0103) + * BAR 2 is fifo memory; unused here + */ + resource = pci_resource_start (pdev, 0); + len = pci_resource_len (pdev, 0); + if (!request_mem_region (resource, len, driver_name)) { + DEBUG (dev, "controller already in use\n"); + retval = -EBUSY; + goto done; + } + dev->region = 1; + + base = ioremap_nocache (resource, len); + if (base == NULL) { + DEBUG (dev, "can't map memory\n"); + retval = -EFAULT; + goto done; + } + dev->regs = (struct net2280_regs __iomem *) base; + dev->usb = (struct net2280_usb_regs __iomem *) (base + 0x0080); + dev->pci = (struct net2280_pci_regs __iomem *) (base + 0x0100); + dev->dma = (struct net2280_dma_regs __iomem *) (base + 0x0180); + dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200); + dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300); + + /* put into initial config, link up all endpoints */ + writel (0, &dev->usb->usbctl); + usb_reset (dev); + usb_reinit (dev); + + /* irq setup after old hardware is cleaned up */ + if (!pdev->irq) { + ERROR (dev, "No IRQ. Check PCI setup!\n"); + retval = -ENODEV; + goto done; + } +#ifndef __sparc__ + scnprintf (buf, sizeof buf, "%d", pdev->irq); + bufp = buf; +#else + bufp = __irq_itoa(pdev->irq); +#endif + if (request_irq (pdev->irq, net2280_irq, SA_SHIRQ, driver_name, dev) + != 0) { + ERROR (dev, "request interrupt %s failed\n", bufp); + retval = -EBUSY; + goto done; + } + dev->got_irq = 1; + + /* DMA setup */ + /* NOTE: we know only the 32 LSBs of dma addresses may be nonzero */ + dev->requests = pci_pool_create ("requests", pdev, + sizeof (struct net2280_dma), + 0 /* no alignment requirements */, + 0 /* or page-crossing issues */); + if (!dev->requests) { + DEBUG (dev, "can't get request pool\n"); + retval = -ENOMEM; + goto done; + } + for (i = 1; i < 5; i++) { + struct net2280_dma *td; + + td = pci_pool_alloc (dev->requests, GFP_KERNEL, + &dev->ep [i].td_dma); + if (!td) { + DEBUG (dev, "can't get dummy %d\n", i); + retval = -ENOMEM; + goto done; + } + td->dmacount = 0; /* not VALID */ + td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); + td->dmadesc = td->dmaaddr; + dev->ep [i].dummy = td; + } + + /* enable lower-overhead pci memory bursts during DMA */ + writel ( (1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) + // 256 write retries may not be enough... + // | (1 << PCI_RETRY_ABORT_ENABLE) + | (1 << DMA_READ_MULTIPLE_ENABLE) + | (1 << DMA_READ_LINE_ENABLE) + , &dev->pci->pcimstctl); + /* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */ + pci_set_master (pdev); + pci_set_mwi (pdev); + + /* ... also flushes any posted pci writes */ + dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff; + + /* done */ + pci_set_drvdata (pdev, dev); + INFO (dev, "%s\n", driver_desc); + INFO (dev, "irq %s, pci mem %p, chip rev %04x\n", + bufp, base, dev->chiprev); + INFO (dev, "version: " DRIVER_VERSION "; dma %s\n", + use_dma + ? (use_dma_chaining ? "chaining" : "enabled") + : "disabled"); + the_controller = dev; + + device_register (&dev->gadget.dev); + device_create_file (&pdev->dev, &dev_attr_registers); + + return 0; + +done: + if (dev) + net2280_remove (pdev); + return retval; +} + + +/*-------------------------------------------------------------------------*/ + +static struct pci_device_id pci_ids [] = { { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = 0x17cc, + .device = 0x2280, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + +}, { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE (pci, pci_ids); + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver net2280_pci_driver = { + .name = (char *) driver_name, + .id_table = pci_ids, + + .probe = net2280_probe, + .remove = net2280_remove, + + /* FIXME add power management support */ +}; + +MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_AUTHOR ("David Brownell"); +MODULE_LICENSE ("GPL"); + +static int __init init (void) +{ + if (!use_dma) + use_dma_chaining = 0; + return pci_register_driver (&net2280_pci_driver); +} +module_init (init); + +static void __exit cleanup (void) +{ + pci_unregister_driver (&net2280_pci_driver); +} +module_exit (cleanup); diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h new file mode 100644 index 0000000..fff4509 --- /dev/null +++ b/drivers/usb/gadget/net2280.h @@ -0,0 +1,728 @@ +/* + * NetChip 2280 high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + */ + +/* + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/*-------------------------------------------------------------------------*/ + +/* NET2280 MEMORY MAPPED REGISTERS + * + * The register layout came from the chip documentation, and the bit + * number definitions were extracted from chip specification. + * + * Use the shift operator ('<<') to build bit masks, with readl/writel + * to access the registers through PCI. + */ + +/* main registers, BAR0 + 0x0000 */ +struct net2280_regs { + // offset 0x0000 + u32 devinit; +#define LOCAL_CLOCK_FREQUENCY 8 +#define FORCE_PCI_RESET 7 +#define PCI_ID 6 +#define PCI_ENABLE 5 +#define FIFO_SOFT_RESET 4 +#define CFG_SOFT_RESET 3 +#define PCI_SOFT_RESET 2 +#define USB_SOFT_RESET 1 +#define M8051_RESET 0 + u32 eectl; +#define EEPROM_ADDRESS_WIDTH 23 +#define EEPROM_CHIP_SELECT_ACTIVE 22 +#define EEPROM_PRESENT 21 +#define EEPROM_VALID 20 +#define EEPROM_BUSY 19 +#define EEPROM_CHIP_SELECT_ENABLE 18 +#define EEPROM_BYTE_READ_START 17 +#define EEPROM_BYTE_WRITE_START 16 +#define EEPROM_READ_DATA 8 +#define EEPROM_WRITE_DATA 0 + u32 eeclkfreq; + u32 _unused0; + // offset 0x0010 + + u32 pciirqenb0; /* interrupt PCI master ... */ +#define SETUP_PACKET_INTERRUPT_ENABLE 7 +#define ENDPOINT_F_INTERRUPT_ENABLE 6 +#define ENDPOINT_E_INTERRUPT_ENABLE 5 +#define ENDPOINT_D_INTERRUPT_ENABLE 4 +#define ENDPOINT_C_INTERRUPT_ENABLE 3 +#define ENDPOINT_B_INTERRUPT_ENABLE 2 +#define ENDPOINT_A_INTERRUPT_ENABLE 1 +#define ENDPOINT_0_INTERRUPT_ENABLE 0 + u32 pciirqenb1; +#define PCI_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + u32 cpu_irqenb0; /* ... or onboard 8051 */ +#define SETUP_PACKET_INTERRUPT_ENABLE 7 +#define ENDPOINT_F_INTERRUPT_ENABLE 6 +#define ENDPOINT_E_INTERRUPT_ENABLE 5 +#define ENDPOINT_D_INTERRUPT_ENABLE 4 +#define ENDPOINT_C_INTERRUPT_ENABLE 3 +#define ENDPOINT_B_INTERRUPT_ENABLE 2 +#define ENDPOINT_A_INTERRUPT_ENABLE 1 +#define ENDPOINT_0_INTERRUPT_ENABLE 0 + u32 cpu_irqenb1; +#define CPU_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_INTA_INTERRUPT_ENABLE 24 +#define PCI_PME_INTERRUPT_ENABLE 23 +#define PCI_SERR_INTERRUPT_ENABLE 22 +#define PCI_PERR_INTERRUPT_ENABLE 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + + // offset 0x0020 + u32 _unused1; + u32 usbirqenb1; +#define USB_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_INTA_INTERRUPT_ENABLE 24 +#define PCI_PME_INTERRUPT_ENABLE 23 +#define PCI_SERR_INTERRUPT_ENABLE 22 +#define PCI_PERR_INTERRUPT_ENABLE 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + u32 irqstat0; +#define INTA_ASSERTED 12 +#define SETUP_PACKET_INTERRUPT 7 +#define ENDPOINT_F_INTERRUPT 6 +#define ENDPOINT_E_INTERRUPT 5 +#define ENDPOINT_D_INTERRUPT 4 +#define ENDPOINT_C_INTERRUPT 3 +#define ENDPOINT_B_INTERRUPT 2 +#define ENDPOINT_A_INTERRUPT 1 +#define ENDPOINT_0_INTERRUPT 0 + u32 irqstat1; +#define POWER_STATE_CHANGE_INTERRUPT 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT 26 +#define PCI_PARITY_ERROR_INTERRUPT 25 +#define PCI_INTA_INTERRUPT 24 +#define PCI_PME_INTERRUPT 23 +#define PCI_SERR_INTERRUPT 22 +#define PCI_PERR_INTERRUPT 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19 +#define PCI_RETRY_ABORT_INTERRUPT 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16 +#define GPIO_INTERRUPT 13 +#define DMA_D_INTERRUPT 12 +#define DMA_C_INTERRUPT 11 +#define DMA_B_INTERRUPT 10 +#define DMA_A_INTERRUPT 9 +#define EEPROM_DONE_INTERRUPT 8 +#define VBUS_INTERRUPT 7 +#define CONTROL_STATUS_INTERRUPT 6 +#define ROOT_PORT_RESET_INTERRUPT 4 +#define SUSPEND_REQUEST_INTERRUPT 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2 +#define RESUME_INTERRUPT 1 +#define SOF_INTERRUPT 0 + // offset 0x0030 + u32 idxaddr; + u32 idxdata; + u32 fifoctl; +#define PCI_BASE2_RANGE 16 +#define IGNORE_FIFO_AVAILABILITY 3 +#define PCI_BASE2_SELECT 2 +#define FIFO_CONFIGURATION_SELECT 0 + u32 _unused2; + // offset 0x0040 + u32 memaddr; +#define START 28 +#define DIRECTION 27 +#define FIFO_DIAGNOSTIC_SELECT 24 +#define MEMORY_ADDRESS 0 + u32 memdata0; + u32 memdata1; + u32 _unused3; + // offset 0x0050 + u32 gpioctl; +#define GPIO3_LED_SELECT 12 +#define GPIO3_INTERRUPT_ENABLE 11 +#define GPIO2_INTERRUPT_ENABLE 10 +#define GPIO1_INTERRUPT_ENABLE 9 +#define GPIO0_INTERRUPT_ENABLE 8 +#define GPIO3_OUTPUT_ENABLE 7 +#define GPIO2_OUTPUT_ENABLE 6 +#define GPIO1_OUTPUT_ENABLE 5 +#define GPIO0_OUTPUT_ENABLE 4 +#define GPIO3_DATA 3 +#define GPIO2_DATA 2 +#define GPIO1_DATA 1 +#define GPIO0_DATA 0 + u32 gpiostat; +#define GPIO3_INTERRUPT 3 +#define GPIO2_INTERRUPT 2 +#define GPIO1_INTERRUPT 1 +#define GPIO0_INTERRUPT 0 +} __attribute__ ((packed)); + +/* usb control, BAR0 + 0x0080 */ +struct net2280_usb_regs { + // offset 0x0080 + u32 stdrsp; +#define STALL_UNSUPPORTED_REQUESTS 31 +#define SET_TEST_MODE 16 +#define GET_OTHER_SPEED_CONFIGURATION 15 +#define GET_DEVICE_QUALIFIER 14 +#define SET_ADDRESS 13 +#define ENDPOINT_SET_CLEAR_HALT 12 +#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11 +#define GET_STRING_DESCRIPTOR_2 10 +#define GET_STRING_DESCRIPTOR_1 9 +#define GET_STRING_DESCRIPTOR_0 8 +#define GET_SET_INTERFACE 6 +#define GET_SET_CONFIGURATION 5 +#define GET_CONFIGURATION_DESCRIPTOR 4 +#define GET_DEVICE_DESCRIPTOR 3 +#define GET_ENDPOINT_STATUS 2 +#define GET_INTERFACE_STATUS 1 +#define GET_DEVICE_STATUS 0 + u32 prodvendid; +#define PRODUCT_ID 16 +#define VENDOR_ID 0 + u32 relnum; + u32 usbctl; +#define SERIAL_NUMBER_INDEX 16 +#define PRODUCT_ID_STRING_ENABLE 13 +#define VENDOR_ID_STRING_ENABLE 12 +#define USB_ROOT_PORT_WAKEUP_ENABLE 11 +#define VBUS_PIN 10 +#define TIMED_DISCONNECT 9 +#define SUSPEND_IMMEDIATELY 7 +#define SELF_POWERED_USB_DEVICE 6 +#define REMOTE_WAKEUP_SUPPORT 5 +#define PME_POLARITY 4 +#define USB_DETECT_ENABLE 3 +#define PME_WAKEUP_ENABLE 2 +#define DEVICE_REMOTE_WAKEUP_ENABLE 1 +#define SELF_POWERED_STATUS 0 + // offset 0x0090 + u32 usbstat; +#define HIGH_SPEED 7 +#define FULL_SPEED 6 +#define GENERATE_RESUME 5 +#define GENERATE_DEVICE_REMOTE_WAKEUP 4 + u32 xcvrdiag; +#define FORCE_HIGH_SPEED_MODE 31 +#define FORCE_FULL_SPEED_MODE 30 +#define USB_TEST_MODE 24 +#define LINE_STATE 16 +#define TRANSCEIVER_OPERATION_MODE 2 +#define TRANSCEIVER_SELECT 1 +#define TERMINATION_SELECT 0 + u32 setup0123; + u32 setup4567; + // offset 0x0090 + u32 _unused0; + u32 ouraddr; +#define FORCE_IMMEDIATE 7 +#define OUR_USB_ADDRESS 0 + u32 ourconfig; +} __attribute__ ((packed)); + +/* pci control, BAR0 + 0x0100 */ +struct net2280_pci_regs { + // offset 0x0100 + u32 pcimstctl; +#define PCI_ARBITER_PARK_SELECT 13 +#define PCI_MULTI LEVEL_ARBITER 12 +#define PCI_RETRY_ABORT_ENABLE 11 +#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10 +#define DMA_READ_MULTIPLE_ENABLE 9 +#define DMA_READ_LINE_ENABLE 8 +#define PCI_MASTER_COMMAND_SELECT 6 +#define MEM_READ_OR_WRITE 0 +#define IO_READ_OR_WRITE 1 +#define CFG_READ_OR_WRITE 2 +#define PCI_MASTER_START 5 +#define PCI_MASTER_READ_WRITE 4 +#define PCI_MASTER_WRITE 0 +#define PCI_MASTER_READ 1 +#define PCI_MASTER_BYTE_WRITE_ENABLES 0 + u32 pcimstaddr; + u32 pcimstdata; + u32 pcimststat; +#define PCI_ARBITER_CLEAR 2 +#define PCI_EXTERNAL_ARBITER 1 +#define PCI_HOST_MODE 0 +} __attribute__ ((packed)); + +/* dma control, BAR0 + 0x0180 ... array of four structs like this, + * for channels 0..3. see also struct net2280_dma: descriptor + * that can be loaded into some of these registers. + */ +struct net2280_dma_regs { /* [11.7] */ + // offset 0x0180, 0x01a0, 0x01c0, 0x01e0, + u32 dmactl; +#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25 +#define DMA_CLEAR_COUNT_ENABLE 21 +#define DESCRIPTOR_POLLING_RATE 19 +#define POLL_CONTINUOUS 0 +#define POLL_1_USEC 1 +#define POLL_100_USEC 2 +#define POLL_1_MSEC 3 +#define DMA_VALID_BIT_POLLING_ENABLE 18 +#define DMA_VALID_BIT_ENABLE 17 +#define DMA_SCATTER_GATHER_ENABLE 16 +#define DMA_OUT_AUTO_START_ENABLE 4 +#define DMA_PREEMPT_ENABLE 3 +#define DMA_FIFO_VALIDATE 2 +#define DMA_ENABLE 1 +#define DMA_ADDRESS_HOLD 0 + u32 dmastat; +#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25 +#define DMA_TRANSACTION_DONE_INTERRUPT 24 +#define DMA_ABORT 1 +#define DMA_START 0 + u32 _unused0 [2]; + // offset 0x0190, 0x01b0, 0x01d0, 0x01f0, + u32 dmacount; +#define VALID_BIT 31 +#define DMA_DIRECTION 30 +#define DMA_DONE_INTERRUPT_ENABLE 29 +#define END_OF_CHAIN 28 +#define DMA_BYTE_COUNT_MASK ((1<<24)-1) +#define DMA_BYTE_COUNT 0 + u32 dmaaddr; + u32 dmadesc; + u32 _unused1; +} __attribute__ ((packed)); + +/* dedicated endpoint registers, BAR0 + 0x0200 */ + +struct net2280_dep_regs { /* [11.8] */ + // offset 0x0200, 0x0210, 0x220, 0x230, 0x240 + u32 dep_cfg; + // offset 0x0204, 0x0214, 0x224, 0x234, 0x244 + u32 dep_rsp; + u32 _unused [2]; +} __attribute__ ((packed)); + +/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs + * like this, for ep0 then the configurable endpoints A..F + * ep0 reserved for control; E and F have only 64 bytes of fifo + */ +struct net2280_ep_regs { /* [11.9] */ + // offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 + u32 ep_cfg; +#define ENDPOINT_BYTE_COUNT 16 +#define ENDPOINT_ENABLE 10 +#define ENDPOINT_TYPE 8 +#define ENDPOINT_DIRECTION 7 +#define ENDPOINT_NUMBER 0 + u32 ep_rsp; +#define SET_NAK_OUT_PACKETS 15 +#define SET_EP_HIDE_STATUS_PHASE 14 +#define SET_EP_FORCE_CRC_ERROR 13 +#define SET_INTERRUPT_MODE 12 +#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11 +#define SET_NAK_OUT_PACKETS_MODE 10 +#define SET_ENDPOINT_TOGGLE 9 +#define SET_ENDPOINT_HALT 8 +#define CLEAR_NAK_OUT_PACKETS 7 +#define CLEAR_EP_HIDE_STATUS_PHASE 6 +#define CLEAR_EP_FORCE_CRC_ERROR 5 +#define CLEAR_INTERRUPT_MODE 4 +#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3 +#define CLEAR_NAK_OUT_PACKETS_MODE 2 +#define CLEAR_ENDPOINT_TOGGLE 1 +#define CLEAR_ENDPOINT_HALT 0 + u32 ep_irqenb; +#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5 +#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3 +#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2 +#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1 +#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0 + u32 ep_stat; +#define FIFO_VALID_COUNT 24 +#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22 +#define TIMEOUT 21 +#define USB_STALL_SENT 20 +#define USB_IN_NAK_SENT 19 +#define USB_IN_ACK_RCVD 18 +#define USB_OUT_PING_NAK_SENT 17 +#define USB_OUT_ACK_SENT 16 +#define FIFO_OVERFLOW 13 +#define FIFO_UNDERFLOW 12 +#define FIFO_FULL 11 +#define FIFO_EMPTY 10 +#define FIFO_FLUSH 9 +#define SHORT_PACKET_OUT_DONE_INTERRUPT 6 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5 +#define NAK_OUT_PACKETS 4 +#define DATA_PACKET_RECEIVED_INTERRUPT 3 +#define DATA_PACKET_TRANSMITTED_INTERRUPT 2 +#define DATA_OUT_PING_TOKEN_INTERRUPT 1 +#define DATA_IN_TOKEN_INTERRUPT 0 + // offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 + u32 ep_avail; + u32 ep_data; + u32 _unused0 [2]; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +#ifdef __KERNEL__ + +/* indexed registers [11.10] are accessed indirectly + * caller must own the device lock. + */ + +static inline u32 +get_idx_reg (struct net2280_regs __iomem *regs, u32 index) +{ + writel (index, ®s->idxaddr); + /* NOTE: synchs device/cpu memory views */ + return readl (®s->idxdata); +} + +static inline void +set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value) +{ + writel (index, ®s->idxaddr); + writel (value, ®s->idxdata); + /* posted, may not be visible yet */ +} + +#endif /* __KERNEL__ */ + + +#define REG_DIAG 0x0 +#define RETRY_COUNTER 16 +#define FORCE_PCI_SERR 11 +#define FORCE_PCI_INTERRUPT 10 +#define FORCE_USB_INTERRUPT 9 +#define FORCE_CPU_INTERRUPT 8 +#define ILLEGAL_BYTE_ENABLES 5 +#define FAST_TIMES 4 +#define FORCE_RECEIVE_ERROR 2 +#define FORCE_TRANSMIT_CRC_ERROR 0 +#define REG_FRAME 0x02 /* from last sof */ +#define REG_CHIPREV 0x03 /* in bcd */ +#define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ + +#define CHIPREV_1 0x0100 +#define CHIPREV_1A 0x0110 + +#ifdef __KERNEL__ + +/* ep a-f highspeed and fullspeed maxpacket, addresses + * computed from ep->num + */ +#define REG_EP_MAXPKT(dev,num) (((num) + 1) * 0x10 + \ + (((dev)->gadget.speed == USB_SPEED_HIGH) ? 0 : 1)) + +/*-------------------------------------------------------------------------*/ + +/* [8.3] for scatter/gather i/o + * use struct net2280_dma_regs bitfields + */ +struct net2280_dma { + __le32 dmacount; + __le32 dmaaddr; /* the buffer */ + __le32 dmadesc; /* next dma descriptor */ + __le32 _reserved; +} __attribute__ ((aligned (16))); + +/*-------------------------------------------------------------------------*/ + +/* DRIVER DATA STRUCTURES and UTILITIES */ + +struct net2280_ep { + struct usb_ep ep; + struct net2280_ep_regs __iomem *regs; + struct net2280_dma_regs __iomem *dma; + struct net2280_dma *dummy; + dma_addr_t td_dma; /* of dummy */ + struct net2280 *dev; + unsigned long irqs; + + /* analogous to a host-side qh */ + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + unsigned num : 8, + fifo_size : 12, + in_fifo_validate : 1, + out_overflow : 1, + stopped : 1, + is_in : 1, + is_iso : 1; +}; + +static inline void allow_status (struct net2280_ep *ep) +{ + /* ep0 only */ + writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) + | (1 << CLEAR_NAK_OUT_PACKETS) + | (1 << CLEAR_NAK_OUT_PACKETS_MODE) + , &ep->regs->ep_rsp); + ep->stopped = 1; +} + +/* count (<= 4) bytes in the next fifo write will be valid */ +static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count) +{ + writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); +} + +struct net2280_request { + struct usb_request req; + struct net2280_dma *td; + dma_addr_t td_dma; + struct list_head queue; + unsigned mapped : 1, + valid : 1; +}; + +struct net2280 { + /* each pci device provides one gadget, several endpoints */ + struct usb_gadget gadget; + spinlock_t lock; + struct net2280_ep ep [7]; + struct usb_gadget_driver *driver; + unsigned enabled : 1, + protocol_stall : 1, + softconnect : 1, + got_irq : 1, + region : 1; + u16 chiprev; + + /* pci state used to access those endpoints */ + struct pci_dev *pdev; + struct net2280_regs __iomem *regs; + struct net2280_usb_regs __iomem *usb; + struct net2280_pci_regs __iomem *pci; + struct net2280_dma_regs __iomem *dma; + struct net2280_dep_regs __iomem *dep; + struct net2280_ep_regs __iomem *epregs; + + struct pci_pool *requests; + // statistics... +}; + +static inline void set_halt (struct net2280_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) + /* set NAK_OUT for erratum 0114 */ + | ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) + | (1 << SET_ENDPOINT_HALT) + , &ep->regs->ep_rsp); +} + +static inline void clear_halt (struct net2280_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + writel ( (1 << CLEAR_ENDPOINT_HALT) + | (1 << CLEAR_ENDPOINT_TOGGLE) + /* unless the gadget driver left a short packet in the + * fifo, this reverses the erratum 0114 workaround. + */ + | ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS) + , &ep->regs->ep_rsp); +} + +#ifdef USE_RDK_LEDS + +static inline void net2280_led_init (struct net2280 *dev) +{ + /* LED3 (green) is on during USB activity. note erratum 0113. */ + writel ((1 << GPIO3_LED_SELECT) + | (1 << GPIO3_OUTPUT_ENABLE) + | (1 << GPIO2_OUTPUT_ENABLE) + | (1 << GPIO1_OUTPUT_ENABLE) + | (1 << GPIO0_OUTPUT_ENABLE) + , &dev->regs->gpioctl); +} + +/* indicate speed with bi-color LED 0/1 */ +static inline +void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed) +{ + u32 val = readl (&dev->regs->gpioctl); + switch (speed) { + case USB_SPEED_HIGH: /* green */ + val &= ~(1 << GPIO0_DATA); + val |= (1 << GPIO1_DATA); + break; + case USB_SPEED_FULL: /* red */ + val &= ~(1 << GPIO1_DATA); + val |= (1 << GPIO0_DATA); + break; + default: /* (off/black) */ + val &= ~((1 << GPIO1_DATA) | (1 << GPIO0_DATA)); + break; + } + writel (val, &dev->regs->gpioctl); +} + +/* indicate power with LED 2 */ +static inline void net2280_led_active (struct net2280 *dev, int is_active) +{ + u32 val = readl (&dev->regs->gpioctl); + + // FIXME this LED never seems to turn on. + if (is_active) + val |= GPIO2_DATA; + else + val &= ~GPIO2_DATA; + writel (val, &dev->regs->gpioctl); +} +static inline void net2280_led_shutdown (struct net2280 *dev) +{ + /* turn off all four GPIO*_DATA bits */ + writel (readl (&dev->regs->gpioctl) & ~0x0f, + &dev->regs->gpioctl); +} + +#else + +#define net2280_led_init(dev) do { } while (0) +#define net2280_led_speed(dev, speed) do { } while (0) +#define net2280_led_shutdown(dev) do { } while (0) + +#endif + +/*-------------------------------------------------------------------------*/ + +#define xprintk(dev,level,fmt,args...) \ + printk(level "%s %s: " fmt , driver_name , \ + pci_name(dev->pdev) , ## args) + +#ifdef DEBUG +#undef DEBUG +#define DEBUG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DEBUG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDEBUG DEBUG +#else +#define VDEBUG(dev,fmt,args...) \ + do { } while (0) +#endif /* VERBOSE */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARN(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + +/*-------------------------------------------------------------------------*/ + +static inline void start_out_naking (struct net2280_ep *ep) +{ + /* NOTE: hardware races lurk here, and PING protocol issues */ + writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + /* synch with device */ + readl (&ep->regs->ep_rsp); +} + +#ifdef DEBUG +static inline void assert_out_naking (struct net2280_ep *ep, const char *where) +{ + u32 tmp = readl (&ep->regs->ep_stat); + + if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { + DEBUG (ep->dev, "%s %s %08x !NAK\n", + ep->ep.name, where, tmp); + writel ((1 << SET_NAK_OUT_PACKETS), + &ep->regs->ep_rsp); + } +} +#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__FUNCTION__) +#else +#define ASSERT_OUT_NAKING(ep) do {} while (0) +#endif + +static inline void stop_out_naking (struct net2280_ep *ep) +{ + u32 tmp; + + tmp = readl (&ep->regs->ep_stat); + if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) + writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); +} + +#endif /* __KERNEL__ */ diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c new file mode 100644 index 0000000..b66ea5a6 --- /dev/null +++ b/drivers/usb/gadget/omap_udc.c @@ -0,0 +1,2872 @@ +/* + * omap_udc.c -- for OMAP full speed udc; most chips support OTG. + * + * Copyright (C) 2004 Texas Instruments, Inc. + * Copyright (C) 2004-2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef DEBUG +#undef VERBOSE + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> +#include <linux/usb_otg.h> +#include <linux/dma-mapping.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> +#include <asm/mach-types.h> + +#include <asm/arch/dma.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> + +#include "omap_udc.h" + +#undef USB_TRACE + +/* bulk DMA seems to be behaving for both IN and OUT */ +#define USE_DMA + +/* ISO too */ +#define USE_ISO + +#define DRIVER_DESC "OMAP UDC driver" +#define DRIVER_VERSION "4 October 2004" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + + +/* + * The OMAP UDC needs _very_ early endpoint setup: before enabling the + * D+ pullup to allow enumeration. That's too early for the gadget + * framework to use from usb_endpoint_enable(), which happens after + * enumeration as part of activating an interface. (But if we add an + * optional new "UDC not yet running" state to the gadget driver model, + * even just during driver binding, the endpoint autoconfig logic is the + * natural spot to manufacture new endpoints.) + * + * So instead of using endpoint enable calls to control the hardware setup, + * this driver defines a "fifo mode" parameter. It's used during driver + * initialization to choose among a set of pre-defined endpoint configs. + * See omap_udc_setup() for available modes, or to add others. That code + * lives in an init section, so use this driver as a module if you need + * to change the fifo mode after the kernel boots. + * + * Gadget drivers normally ignore endpoints they don't care about, and + * won't include them in configuration descriptors. That means only + * misbehaving hosts would even notice they exist. + */ +#ifdef USE_ISO +static unsigned fifo_mode = 3; +#else +static unsigned fifo_mode = 0; +#endif + +/* "modprobe omap_udc fifo_mode=42", or else as a kernel + * boot parameter "omap_udc:fifo_mode=42" + */ +module_param (fifo_mode, uint, 0); +MODULE_PARM_DESC (fifo_mode, "endpoint setup (0 == default)"); + +#ifdef USE_DMA +static unsigned use_dma = 1; + +/* "modprobe omap_udc use_dma=y", or else as a kernel + * boot parameter "omap_udc:use_dma=y" + */ +module_param (use_dma, bool, 0); +MODULE_PARM_DESC (use_dma, "enable/disable DMA"); +#else /* !USE_DMA */ + +/* save a bit of code */ +#define use_dma 0 +#endif /* !USE_DMA */ + + +static const char driver_name [] = "omap_udc"; +static const char driver_desc [] = DRIVER_DESC; + +/*-------------------------------------------------------------------------*/ + +/* there's a notion of "current endpoint" for modifying endpoint + * state, and PIO access to its FIFO. + */ + +static void use_ep(struct omap_ep *ep, u16 select) +{ + u16 num = ep->bEndpointAddress & 0x0f; + + if (ep->bEndpointAddress & USB_DIR_IN) + num |= UDC_EP_DIR; + UDC_EP_NUM_REG = num | select; + /* when select, MUST deselect later !! */ +} + +static inline void deselect_ep(void) +{ + UDC_EP_NUM_REG &= ~UDC_EP_SEL; + /* 6 wait states before TX will happen */ +} + +static void dma_channel_claim(struct omap_ep *ep, unsigned preferred); + +/*-------------------------------------------------------------------------*/ + +static int omap_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + struct omap_udc *udc; + unsigned long flags; + u16 maxp; + + /* catch various bogus parameters */ + if (!_ep || !desc || ep->desc + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep->maxpacket < le16_to_cpu + (desc->wMaxPacketSize)) { + DBG("%s, bad ep or descriptor\n", __FUNCTION__); + return -EINVAL; + } + maxp = le16_to_cpu (desc->wMaxPacketSize); + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && maxp != ep->maxpacket) + || desc->wMaxPacketSize > ep->maxpacket + || !desc->wMaxPacketSize) { + DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); + return -ERANGE; + } + +#ifdef USE_ISO + if ((desc->bmAttributes == USB_ENDPOINT_XFER_ISOC + && desc->bInterval != 1)) { + /* hardware wants period = 1; USB allows 2^(Interval-1) */ + DBG("%s, unsupported ISO period %dms\n", _ep->name, + 1 << (desc->bInterval - 1)); + return -EDOM; + } +#else + if (desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DBG("%s, ISO nyet\n", _ep->name); + return -EDOM; + } +#endif + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DBG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + return -EINVAL; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + DBG("%s, bogus device state\n", __FUNCTION__); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&udc->lock, flags); + + ep->desc = desc; + ep->irqs = 0; + ep->stopped = 0; + ep->ep.maxpacket = maxp; + + /* set endpoint to initial state */ + ep->dma_channel = 0; + ep->has_dma = 0; + ep->lch = -1; + use_ep(ep, UDC_EP_SEL); + UDC_CTRL_REG = UDC_RESET_EP; + ep->ackwait = 0; + deselect_ep(); + + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + list_add(&ep->iso, &udc->iso); + + /* maybe assign a DMA channel to this endpoint */ + if (use_dma && desc->bmAttributes == USB_ENDPOINT_XFER_BULK) + /* FIXME ISO can dma, but prefers first channel */ + dma_channel_claim(ep, 0); + + /* PIO OUT may RX packets */ + if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC + && !ep->has_dma + && !(ep->bEndpointAddress & USB_DIR_IN)) { + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1 + ep->double_buf; + } + + spin_unlock_irqrestore(&udc->lock, flags); + VDBG("%s enabled\n", _ep->name); + return 0; +} + +static void nuke(struct omap_ep *, int status); + +static int omap_ep_disable(struct usb_ep *_ep) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + unsigned long flags; + + if (!_ep || !ep->desc) { + DBG("%s, %s not enabled\n", __FUNCTION__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + spin_lock_irqsave(&ep->udc->lock, flags); + ep->desc = 0; + nuke (ep, -ESHUTDOWN); + ep->ep.maxpacket = ep->maxpacket; + ep->has_dma = 0; + UDC_CTRL_REG = UDC_SET_HALT; + list_del_init(&ep->iso); + del_timer(&ep->timer); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + + VDBG("%s disabled\n", _ep->name); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +omap_alloc_request(struct usb_ep *ep, int gfp_flags) +{ + struct omap_req *req; + + req = kmalloc(sizeof *req, gfp_flags); + if (req) { + memset (req, 0, sizeof *req); + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD (&req->queue); + } + return &req->req; +} + +static void +omap_free_request(struct usb_ep *ep, struct usb_request *_req) +{ + struct omap_req *req = container_of(_req, struct omap_req, req); + + if (_req) + kfree (req); +} + +/*-------------------------------------------------------------------------*/ + +static void * +omap_alloc_buffer( + struct usb_ep *_ep, + unsigned bytes, + dma_addr_t *dma, + int gfp_flags +) +{ + void *retval; + struct omap_ep *ep; + + ep = container_of(_ep, struct omap_ep, ep); + if (use_dma && ep->has_dma) { + static int warned; + if (!warned && bytes < PAGE_SIZE) { + dev_warn(ep->udc->gadget.dev.parent, + "using dma_alloc_coherent for " + "small allocations wastes memory\n"); + warned++; + } + return dma_alloc_coherent(ep->udc->gadget.dev.parent, + bytes, dma, gfp_flags); + } + + retval = kmalloc(bytes, gfp_flags); + if (retval) + *dma = virt_to_phys(retval); + return retval; +} + +static void omap_free_buffer( + struct usb_ep *_ep, + void *buf, + dma_addr_t dma, + unsigned bytes +) +{ + struct omap_ep *ep; + + ep = container_of(_ep, struct omap_ep, ep); + if (use_dma && _ep && ep->has_dma) + dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma); + else + kfree (buf); +} + +/*-------------------------------------------------------------------------*/ + +static void +done(struct omap_ep *ep, struct omap_req *req, int status) +{ + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (use_dma && ep->has_dma) { + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + (ep->bEndpointAddress & USB_DIR_IN) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } else + dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + (ep->bEndpointAddress & USB_DIR_IN) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + } + +#ifndef USB_TRACE + if (status && status != -ESHUTDOWN) +#endif + VDBG("complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&ep->udc->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&ep->udc->lock); + ep->stopped = stopped; +} + +/*-------------------------------------------------------------------------*/ + +#define FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL) +#define FIFO_UNWRITABLE (UDC_EP_HALTED | FIFO_FULL) + +#define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY) +#define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY) + +static inline int +write_packet(u8 *buf, struct omap_req *req, unsigned max) +{ + unsigned len; + u16 *wp; + + len = min(req->req.length - req->req.actual, max); + req->req.actual += len; + + max = len; + if (likely((((int)buf) & 1) == 0)) { + wp = (u16 *)buf; + while (max >= 2) { + UDC_DATA_REG = *wp++; + max -= 2; + } + buf = (u8 *)wp; + } + while (max--) + *(volatile u8 *)&UDC_DATA_REG = *buf++; + return len; +} + +// FIXME change r/w fifo calling convention + + +// return: 0 = still running, 1 = completed, negative = errno +static int write_fifo(struct omap_ep *ep, struct omap_req *req) +{ + u8 *buf; + unsigned count; + int is_last; + u16 ep_stat; + + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* PIO-IN isn't double buffered except for iso */ + ep_stat = UDC_STAT_FLG_REG; + if (ep_stat & FIFO_UNWRITABLE) + return 0; + + count = ep->ep.maxpacket; + count = write_packet(buf, req, count); + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1; + + /* last packet is often short (sometimes a zlp) */ + if (count != ep->ep.maxpacket) + is_last = 1; + else if (req->req.length == req->req.actual + && !req->req.zero) + is_last = 1; + else + is_last = 0; + + /* NOTE: requests complete when all IN data is in a + * FIFO (or sometimes later, if a zlp was needed). + * Use usb_ep_fifo_status() where needed. + */ + if (is_last) + done(ep, req, 0); + return is_last; +} + +static inline int +read_packet(u8 *buf, struct omap_req *req, unsigned avail) +{ + unsigned len; + u16 *wp; + + len = min(req->req.length - req->req.actual, avail); + req->req.actual += len; + avail = len; + + if (likely((((int)buf) & 1) == 0)) { + wp = (u16 *)buf; + while (avail >= 2) { + *wp++ = UDC_DATA_REG; + avail -= 2; + } + buf = (u8 *)wp; + } + while (avail--) + *buf++ = *(volatile u8 *)&UDC_DATA_REG; + return len; +} + +// return: 0 = still running, 1 = queue empty, negative = errno +static int read_fifo(struct omap_ep *ep, struct omap_req *req) +{ + u8 *buf; + unsigned count, avail; + int is_last; + + buf = req->req.buf + req->req.actual; + prefetchw(buf); + + for (;;) { + u16 ep_stat = UDC_STAT_FLG_REG; + + is_last = 0; + if (ep_stat & FIFO_EMPTY) { + if (!ep->double_buf) + break; + ep->fnf = 1; + } + if (ep_stat & UDC_EP_HALTED) + break; + + if (ep_stat & FIFO_FULL) + avail = ep->ep.maxpacket; + else { + avail = UDC_RXFSTAT_REG; + ep->fnf = ep->double_buf; + } + count = read_packet(buf, req, avail); + + /* partial packet reads may not be errors */ + if (count < ep->ep.maxpacket) { + is_last = 1; + /* overflowed this request? flush extra data */ + if (count != avail) { + req->req.status = -EOVERFLOW; + avail -= count; + while (avail--) + (void) *(volatile u8 *)&UDC_DATA_REG; + } + } else if (req->req.length == req->req.actual) + is_last = 1; + else + is_last = 0; + + if (!ep->bEndpointAddress) + break; + if (is_last) + done(ep, req, 0); + break; + } + return is_last; +} + +/*-------------------------------------------------------------------------*/ + +static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start) +{ + dma_addr_t end; + + /* IN-DMA needs this on fault/cancel paths, so 15xx misreports + * the last transfer's bytecount by more than a FIFO's worth. + */ + if (cpu_is_omap15xx()) + return 0; + + end = omap_readw(OMAP_DMA_CSAC(ep->lch)); + if (end == ep->dma_counter) + return 0; + + end |= start & (0xffff << 16); + if (end < start) + end += 0x10000; + return end - start; +} + +#define DMA_DEST_LAST(x) (cpu_is_omap15xx() \ + ? OMAP_DMA_CSAC(x) /* really: CPC */ \ + : OMAP_DMA_CDAC(x)) + +static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start) +{ + dma_addr_t end; + + end = omap_readw(DMA_DEST_LAST(ep->lch)); + if (end == ep->dma_counter) + return 0; + + end |= start & (0xffff << 16); + if (cpu_is_omap15xx()) + end++; + if (end < start) + end += 0x10000; + return end - start; +} + + +/* Each USB transfer request using DMA maps to one or more DMA transfers. + * When DMA completion isn't request completion, the UDC continues with + * the next DMA transfer for that USB transfer. + */ + +static void next_in_dma(struct omap_ep *ep, struct omap_req *req) +{ + u16 txdma_ctrl; + unsigned length = req->req.length - req->req.actual; + const int sync_mode = cpu_is_omap15xx() + ? OMAP_DMA_SYNC_FRAME + : OMAP_DMA_SYNC_ELEMENT; + + /* measure length in either bytes or packets */ + if ((cpu_is_omap16xx() && length <= (UDC_TXN_TSC + 1)) + || (cpu_is_omap15xx() && length < ep->maxpacket)) { + txdma_ctrl = UDC_TXN_EOT | length; + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, + length, 1, sync_mode); + } else { + length = min(length / ep->maxpacket, + (unsigned) UDC_TXN_TSC + 1); + txdma_ctrl = length; + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, + ep->ep.maxpacket, length, sync_mode); + length *= ep->maxpacket; + } + omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF, + OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual); + + omap_start_dma(ep->lch); + ep->dma_counter = omap_readw(OMAP_DMA_CSAC(ep->lch)); + UDC_DMA_IRQ_EN_REG |= UDC_TX_DONE_IE(ep->dma_channel); + UDC_TXDMA_REG(ep->dma_channel) = UDC_TXN_START | txdma_ctrl; + req->dma_bytes = length; +} + +static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status) +{ + if (status == 0) { + req->req.actual += req->dma_bytes; + + /* return if this request needs to send data or zlp */ + if (req->req.actual < req->req.length) + return; + if (req->req.zero + && req->dma_bytes != 0 + && (req->req.actual % ep->maxpacket) == 0) + return; + } else + req->req.actual += dma_src_len(ep, req->req.dma + + req->req.actual); + + /* tx completion */ + omap_stop_dma(ep->lch); + UDC_DMA_IRQ_EN_REG &= ~UDC_TX_DONE_IE(ep->dma_channel); + done(ep, req, status); +} + +static void next_out_dma(struct omap_ep *ep, struct omap_req *req) +{ + unsigned packets; + + /* NOTE: we filtered out "short reads" before, so we know + * the buffer has only whole numbers of packets. + */ + + /* set up this DMA transfer, enable the fifo, start */ + packets = (req->req.length - req->req.actual) / ep->ep.maxpacket; + packets = min(packets, (unsigned)UDC_RXN_TC + 1); + req->dma_bytes = packets * ep->ep.maxpacket; + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, + ep->ep.maxpacket, packets, + OMAP_DMA_SYNC_ELEMENT); + omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF, + OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual); + ep->dma_counter = omap_readw(DMA_DEST_LAST(ep->lch)); + + UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1); + UDC_DMA_IRQ_EN_REG |= UDC_RX_EOT_IE(ep->dma_channel); + UDC_EP_NUM_REG = (ep->bEndpointAddress & 0xf); + UDC_CTRL_REG = UDC_SET_FIFO_EN; + + omap_start_dma(ep->lch); +} + +static void +finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status) +{ + u16 count; + + if (status == 0) + ep->dma_counter = (u16) (req->req.dma + req->req.actual); + count = dma_dest_len(ep, req->req.dma + req->req.actual); + count += req->req.actual; + if (count <= req->req.length) + req->req.actual = count; + + if (count != req->dma_bytes || status) + omap_stop_dma(ep->lch); + + /* if this wasn't short, request may need another transfer */ + else if (req->req.actual < req->req.length) + return; + + /* rx completion */ + UDC_DMA_IRQ_EN_REG &= ~UDC_RX_EOT_IE(ep->dma_channel); + done(ep, req, status); +} + +static void dma_irq(struct omap_udc *udc, u16 irq_src) +{ + u16 dman_stat = UDC_DMAN_STAT_REG; + struct omap_ep *ep; + struct omap_req *req; + + /* IN dma: tx to host */ + if (irq_src & UDC_TXN_DONE) { + ep = &udc->ep[16 + UDC_DMA_TX_SRC(dman_stat)]; + ep->irqs++; + /* can see TXN_DONE after dma abort */ + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + finish_in_dma(ep, req, 0); + } + UDC_IRQ_SRC_REG = UDC_TXN_DONE; + + if (!list_empty (&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + next_in_dma(ep, req); + } + } + + /* OUT dma: rx from host */ + if (irq_src & UDC_RXN_EOT) { + ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)]; + ep->irqs++; + /* can see RXN_EOT after dma abort */ + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + finish_out_dma(ep, req, 0); + } + UDC_IRQ_SRC_REG = UDC_RXN_EOT; + + if (!list_empty (&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + next_out_dma(ep, req); + } + } + + if (irq_src & UDC_RXN_CNT) { + ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)]; + ep->irqs++; + /* omap15xx does this unasked... */ + VDBG("%s, RX_CNT irq?\n", ep->ep.name); + UDC_IRQ_SRC_REG = UDC_RXN_CNT; + } +} + +static void dma_error(int lch, u16 ch_status, void *data) +{ + struct omap_ep *ep = data; + + /* if ch_status & OMAP_DMA_DROP_IRQ ... */ + /* if ch_status & OMAP_DMA_TOUT_IRQ ... */ + ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status); + + /* complete current transfer ... */ +} + +static void dma_channel_claim(struct omap_ep *ep, unsigned channel) +{ + u16 reg; + int status, restart, is_in; + + is_in = ep->bEndpointAddress & USB_DIR_IN; + if (is_in) + reg = UDC_TXDMA_CFG_REG; + else + reg = UDC_RXDMA_CFG_REG; + reg |= 1 << 12; /* "pulse" activated */ + + ep->dma_channel = 0; + ep->lch = -1; + if (channel == 0 || channel > 3) { + if ((reg & 0x0f00) == 0) + channel = 3; + else if ((reg & 0x00f0) == 0) + channel = 2; + else if ((reg & 0x000f) == 0) /* preferred for ISO */ + channel = 1; + else { + status = -EMLINK; + goto just_restart; + } + } + reg |= (0x0f & ep->bEndpointAddress) << (4 * (channel - 1)); + ep->dma_channel = channel; + + if (is_in) { + status = omap_request_dma(OMAP_DMA_USB_W2FC_TX0 - 1 + channel, + ep->ep.name, dma_error, ep, &ep->lch); + if (status == 0) { + UDC_TXDMA_CFG_REG = reg; + omap_set_dma_dest_params(ep->lch, + OMAP_DMA_PORT_TIPB, + OMAP_DMA_AMODE_CONSTANT, + (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG)); + } + } else { + status = omap_request_dma(OMAP_DMA_USB_W2FC_RX0 - 1 + channel, + ep->ep.name, dma_error, ep, &ep->lch); + if (status == 0) { + UDC_RXDMA_CFG_REG = reg; + omap_set_dma_src_params(ep->lch, + OMAP_DMA_PORT_TIPB, + OMAP_DMA_AMODE_CONSTANT, + (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG)); + } + } + if (status) + ep->dma_channel = 0; + else { + ep->has_dma = 1; + omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ); + + /* channel type P: hw synch (fifo) */ + if (!cpu_is_omap15xx()) + omap_writew(2, OMAP_DMA_LCH_CTRL(ep->lch)); + } + +just_restart: + /* restart any queue, even if the claim failed */ + restart = !ep->stopped && !list_empty(&ep->queue); + + if (status) + DBG("%s no dma channel: %d%s\n", ep->ep.name, status, + restart ? " (restart)" : ""); + else + DBG("%s claimed %cxdma%d lch %d%s\n", ep->ep.name, + is_in ? 't' : 'r', + ep->dma_channel - 1, ep->lch, + restart ? " (restart)" : ""); + + if (restart) { + struct omap_req *req; + req = container_of(ep->queue.next, struct omap_req, queue); + if (ep->has_dma) + (is_in ? next_in_dma : next_out_dma)(ep, req); + else { + use_ep(ep, UDC_EP_SEL); + (is_in ? write_fifo : read_fifo)(ep, req); + deselect_ep(); + if (!is_in) { + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1 + ep->double_buf; + } + /* IN: 6 wait states before it'll tx */ + } + } +} + +static void dma_channel_release(struct omap_ep *ep) +{ + int shift = 4 * (ep->dma_channel - 1); + u16 mask = 0x0f << shift; + struct omap_req *req; + int active; + + /* abort any active usb transfer request */ + if (!list_empty(&ep->queue)) + req = container_of(ep->queue.next, struct omap_req, queue); + else + req = 0; + + active = ((1 << 7) & omap_readl(OMAP_DMA_CCR(ep->lch))) != 0; + + DBG("%s release %s %cxdma%d %p\n", ep->ep.name, + active ? "active" : "idle", + (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r', + ep->dma_channel - 1, req); + + /* wait till current packet DMA finishes, and fifo empties */ + if (ep->bEndpointAddress & USB_DIR_IN) { + UDC_TXDMA_CFG_REG &= ~mask; + + if (req) { + finish_in_dma(ep, req, -ECONNRESET); + + /* clear FIFO; hosts probably won't empty it */ + use_ep(ep, UDC_EP_SEL); + UDC_CTRL_REG = UDC_CLR_EP; + deselect_ep(); + } + while (UDC_TXDMA_CFG_REG & mask) + udelay(10); + } else { + UDC_RXDMA_CFG_REG &= ~mask; + + /* dma empties the fifo */ + while (UDC_RXDMA_CFG_REG & mask) + udelay(10); + if (req) + finish_out_dma(ep, req, -ECONNRESET); + } + omap_free_dma(ep->lch); + ep->dma_channel = 0; + ep->lch = -1; + /* has_dma still set, till endpoint is fully quiesced */ +} + + +/*-------------------------------------------------------------------------*/ + +static int +omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + struct omap_req *req = container_of(_req, struct omap_req, req); + struct omap_udc *udc; + unsigned long flags; + int is_iso = 0; + + /* catch various bogus parameters */ + if (!_req || !req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + DBG("%s, bad params\n", __FUNCTION__); + return -EINVAL; + } + if (!_ep || (!ep->desc && ep->bEndpointAddress)) { + DBG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (req->req.length > ep->ep.maxpacket) + return -EMSGSIZE; + is_iso = 1; + } + + /* this isn't bogus, but OMAP DMA isn't the only hardware to + * have a hard time with partial packet reads... reject it. + */ + if (use_dma + && ep->has_dma + && ep->bEndpointAddress != 0 + && (ep->bEndpointAddress & USB_DIR_IN) == 0 + && (req->req.length % ep->ep.maxpacket) != 0) { + DBG("%s, no partial packet OUT reads\n", __FUNCTION__); + return -EMSGSIZE; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + if (use_dma && ep->has_dma) { + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single( + ep->udc->gadget.dev.parent, + req->req.buf, + req->req.length, + (ep->bEndpointAddress & USB_DIR_IN) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + req->mapped = 1; + } else { + dma_sync_single_for_device( + ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + (ep->bEndpointAddress & USB_DIR_IN) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + req->mapped = 0; + } + } + + VDBG("%s queue req %p, len %d buf %p\n", + ep->ep.name, _req, _req->length, _req->buf); + + spin_lock_irqsave(&udc->lock, flags); + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + + /* maybe kickstart non-iso i/o queues */ + if (is_iso) + UDC_IRQ_EN_REG |= UDC_SOF_IE; + else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) { + int is_in; + + if (ep->bEndpointAddress == 0) { + if (!udc->ep0_pending || !list_empty (&ep->queue)) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EL2HLT; + } + + /* empty DATA stage? */ + is_in = udc->ep0_in; + if (!req->req.length) { + + /* chip became CONFIGURED or ADDRESSED + * earlier; drivers may already have queued + * requests to non-control endpoints + */ + if (udc->ep0_set_config) { + u16 irq_en = UDC_IRQ_EN_REG; + + irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE; + if (!udc->ep0_reset_config) + irq_en |= UDC_EPN_RX_IE + | UDC_EPN_TX_IE; + UDC_IRQ_EN_REG = irq_en; + } + + /* STATUS is reverse direction */ + UDC_EP_NUM_REG = is_in + ? UDC_EP_SEL + : (UDC_EP_SEL|UDC_EP_DIR); + UDC_CTRL_REG = UDC_CLR_EP; + UDC_CTRL_REG = UDC_SET_FIFO_EN; + UDC_EP_NUM_REG = udc->ep0_in ? 0 : UDC_EP_DIR; + + /* cleanup */ + udc->ep0_pending = 0; + done(ep, req, 0); + req = 0; + + /* non-empty DATA stage */ + } else if (is_in) { + UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; + } else { + if (udc->ep0_setup) + goto irq_wait; + UDC_EP_NUM_REG = UDC_EP_SEL; + } + } else { + is_in = ep->bEndpointAddress & USB_DIR_IN; + if (!ep->has_dma) + use_ep(ep, UDC_EP_SEL); + /* if ISO: SOF IRQs must be enabled/disabled! */ + } + + if (ep->has_dma) + (is_in ? next_in_dma : next_out_dma)(ep, req); + else if (req) { + if ((is_in ? write_fifo : read_fifo)(ep, req) == 1) + req = 0; + deselect_ep(); + if (!is_in) { + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1 + ep->double_buf; + } + /* IN: 6 wait states before it'll tx */ + } + } + +irq_wait: + /* irq handler advances the queue */ + if (req != 0) + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + struct omap_req *req; + unsigned long flags; + + if (!_ep || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore(&ep->udc->lock, flags); + return -EINVAL; + } + + if (use_dma && ep->dma_channel && ep->queue.next == &req->queue) { + int channel = ep->dma_channel; + + /* releasing the channel cancels the request, + * reclaiming the channel restarts the queue + */ + dma_channel_release(ep); + dma_channel_claim(ep, channel); + } else + done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->udc->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int omap_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + unsigned long flags; + int status = -EOPNOTSUPP; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* just use protocol stalls for ep0; real halts are annoying */ + if (ep->bEndpointAddress == 0) { + if (!ep->udc->ep0_pending) + status = -EINVAL; + else if (value) { + if (ep->udc->ep0_set_config) { + WARN("error changing config?\n"); + UDC_SYSCON2_REG = UDC_CLR_CFG; + } + UDC_SYSCON2_REG = UDC_STALL_CMD; + ep->udc->ep0_pending = 0; + status = 0; + } else /* NOP */ + status = 0; + + /* otherwise, all active non-ISO endpoints can halt */ + } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) { + + /* IN endpoints must already be idle */ + if ((ep->bEndpointAddress & USB_DIR_IN) + && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto done; + } + + if (value) { + int channel; + + if (use_dma && ep->dma_channel + && !list_empty(&ep->queue)) { + channel = ep->dma_channel; + dma_channel_release(ep); + } else + channel = 0; + + use_ep(ep, UDC_EP_SEL); + if (UDC_STAT_FLG_REG & UDC_NON_ISO_FIFO_EMPTY) { + UDC_CTRL_REG = UDC_SET_HALT; + status = 0; + } else + status = -EAGAIN; + deselect_ep(); + + if (channel) + dma_channel_claim(ep, channel); + } else { + use_ep(ep, 0); + UDC_CTRL_REG = UDC_RESET_EP; + ep->ackwait = 0; + if (!(ep->bEndpointAddress & USB_DIR_IN)) { + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1 + ep->double_buf; + } + } + } +done: + VDBG("%s %s halt stat %d\n", ep->ep.name, + value ? "set" : "clear", status); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + return status; +} + +static struct usb_ep_ops omap_ep_ops = { + .enable = omap_ep_enable, + .disable = omap_ep_disable, + + .alloc_request = omap_alloc_request, + .free_request = omap_free_request, + + .alloc_buffer = omap_alloc_buffer, + .free_buffer = omap_free_buffer, + + .queue = omap_ep_queue, + .dequeue = omap_ep_dequeue, + + .set_halt = omap_ep_set_halt, + // fifo_status ... report bytes in fifo + // fifo_flush ... flush fifo +}; + +/*-------------------------------------------------------------------------*/ + +static int omap_get_frame(struct usb_gadget *gadget) +{ + u16 sof = UDC_SOF_REG; + return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC; +} + +static int omap_wakeup(struct usb_gadget *gadget) +{ + struct omap_udc *udc; + unsigned long flags; + int retval = -EHOSTUNREACH; + + udc = container_of(gadget, struct omap_udc, gadget); + + spin_lock_irqsave(&udc->lock, flags); + if (udc->devstat & UDC_SUS) { + /* NOTE: OTG spec erratum says that OTG devices may + * issue wakeups without host enable. + */ + if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) { + DBG("remote wakeup...\n"); + UDC_SYSCON2_REG = UDC_RMT_WKP; + retval = 0; + } + + /* NOTE: non-OTG systems may use SRP TOO... */ + } else if (!(udc->devstat & UDC_ATT)) { + if (udc->transceiver) + retval = otg_start_srp(udc->transceiver); + } + spin_unlock_irqrestore(&udc->lock, flags); + + return retval; +} + +static int +omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) +{ + struct omap_udc *udc; + unsigned long flags; + u16 syscon1; + + udc = container_of(gadget, struct omap_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + syscon1 = UDC_SYSCON1_REG; + if (is_selfpowered) + syscon1 |= UDC_SELF_PWR; + else + syscon1 &= ~UDC_SELF_PWR; + UDC_SYSCON1_REG = syscon1; + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int can_pullup(struct omap_udc *udc) +{ + return udc->driver && udc->softconnect && udc->vbus_active; +} + +static void pullup_enable(struct omap_udc *udc) +{ + UDC_SYSCON1_REG |= UDC_PULLUP_EN; +#ifndef CONFIG_USB_OTG + if (!cpu_is_omap15xx()) + OTG_CTRL_REG |= OTG_BSESSVLD; +#endif + UDC_IRQ_EN_REG = UDC_DS_CHG_IE; +} + +static void pullup_disable(struct omap_udc *udc) +{ +#ifndef CONFIG_USB_OTG + if (!cpu_is_omap15xx()) + OTG_CTRL_REG &= ~OTG_BSESSVLD; +#endif + UDC_IRQ_EN_REG = UDC_DS_CHG_IE; + UDC_SYSCON1_REG &= ~UDC_PULLUP_EN; +} + +/* + * Called by whatever detects VBUS sessions: external transceiver + * driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock. + */ +static int omap_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct omap_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct omap_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + VDBG("VBUS %s\n", is_active ? "on" : "off"); + udc->vbus_active = (is_active != 0); + if (cpu_is_omap15xx()) { + /* "software" detect, ignored if !VBUS_MODE_1510 */ + if (is_active) + FUNC_MUX_CTRL_0_REG |= VBUS_CTRL_1510; + else + FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510; + } + if (can_pullup(udc)) + pullup_enable(udc); + else + pullup_disable(udc); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct omap_udc *udc; + + udc = container_of(gadget, struct omap_udc, gadget); + if (udc->transceiver) + return otg_set_power(udc->transceiver, mA); + return -EOPNOTSUPP; +} + +static int omap_pullup(struct usb_gadget *gadget, int is_on) +{ + struct omap_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct omap_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + udc->softconnect = (is_on != 0); + if (can_pullup(udc)) + pullup_enable(udc); + else + pullup_disable(udc); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static struct usb_gadget_ops omap_gadget_ops = { + .get_frame = omap_get_frame, + .wakeup = omap_wakeup, + .set_selfpowered = omap_set_selfpowered, + .vbus_session = omap_vbus_session, + .vbus_draw = omap_vbus_draw, + .pullup = omap_pullup, +}; + +/*-------------------------------------------------------------------------*/ + +/* dequeue ALL requests; caller holds udc->lock */ +static void nuke(struct omap_ep *ep, int status) +{ + struct omap_req *req; + + ep->stopped = 1; + + if (use_dma && ep->dma_channel) + dma_channel_release(ep); + + use_ep(ep, 0); + UDC_CTRL_REG = UDC_CLR_EP; + if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC) + UDC_CTRL_REG = UDC_SET_HALT; + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct omap_req, queue); + done(ep, req, status); + } +} + +/* caller holds udc->lock */ +static void udc_quiesce(struct omap_udc *udc) +{ + struct omap_ep *ep; + + udc->gadget.speed = USB_SPEED_UNKNOWN; + nuke(&udc->ep[0], -ESHUTDOWN); + list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) + nuke(ep, -ESHUTDOWN); +} + +/*-------------------------------------------------------------------------*/ + +static void update_otg(struct omap_udc *udc) +{ + u16 devstat; + + if (!udc->gadget.is_otg) + return; + + if (OTG_CTRL_REG & OTG_ID) + devstat = UDC_DEVSTAT_REG; + else + devstat = 0; + + udc->gadget.b_hnp_enable = !!(devstat & UDC_B_HNP_ENABLE); + udc->gadget.a_hnp_support = !!(devstat & UDC_A_HNP_SUPPORT); + udc->gadget.a_alt_hnp_support = !!(devstat & UDC_A_ALT_HNP_SUPPORT); + + /* Enable HNP early, avoiding races on suspend irq path. + * ASSUMES OTG state machine B_BUS_REQ input is true. + */ + if (udc->gadget.b_hnp_enable) + OTG_CTRL_REG = (OTG_CTRL_REG | OTG_B_HNPEN | OTG_B_BUSREQ) + & ~OTG_PULLUP; +} + +static void ep0_irq(struct omap_udc *udc, u16 irq_src) +{ + struct omap_ep *ep0 = &udc->ep[0]; + struct omap_req *req = 0; + + ep0->irqs++; + + /* Clear any pending requests and then scrub any rx/tx state + * before starting to handle the SETUP request. + */ + if (irq_src & UDC_SETUP) { + u16 ack = irq_src & (UDC_EP0_TX|UDC_EP0_RX); + + nuke(ep0, 0); + if (ack) { + UDC_IRQ_SRC_REG = ack; + irq_src = UDC_SETUP; + } + } + + /* IN/OUT packets mean we're in the DATA or STATUS stage. + * This driver uses only uses protocol stalls (ep0 never halts), + * and if we got this far the gadget driver already had a + * chance to stall. Tries to be forgiving of host oddities. + * + * NOTE: the last chance gadget drivers have to stall control + * requests is during their request completion callback. + */ + if (!list_empty(&ep0->queue)) + req = container_of(ep0->queue.next, struct omap_req, queue); + + /* IN == TX to host */ + if (irq_src & UDC_EP0_TX) { + int stat; + + UDC_IRQ_SRC_REG = UDC_EP0_TX; + UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; + stat = UDC_STAT_FLG_REG; + if (stat & UDC_ACK) { + if (udc->ep0_in) { + /* write next IN packet from response, + * or set up the status stage. + */ + if (req) + stat = write_fifo(ep0, req); + UDC_EP_NUM_REG = UDC_EP_DIR; + if (!req && udc->ep0_pending) { + UDC_EP_NUM_REG = UDC_EP_SEL; + UDC_CTRL_REG = UDC_CLR_EP; + UDC_CTRL_REG = UDC_SET_FIFO_EN; + UDC_EP_NUM_REG = 0; + udc->ep0_pending = 0; + } /* else: 6 wait states before it'll tx */ + } else { + /* ack status stage of OUT transfer */ + UDC_EP_NUM_REG = UDC_EP_DIR; + if (req) + done(ep0, req, 0); + } + req = 0; + } else if (stat & UDC_STALL) { + UDC_CTRL_REG = UDC_CLR_HALT; + UDC_EP_NUM_REG = UDC_EP_DIR; + } else { + UDC_EP_NUM_REG = UDC_EP_DIR; + } + } + + /* OUT == RX from host */ + if (irq_src & UDC_EP0_RX) { + int stat; + + UDC_IRQ_SRC_REG = UDC_EP0_RX; + UDC_EP_NUM_REG = UDC_EP_SEL; + stat = UDC_STAT_FLG_REG; + if (stat & UDC_ACK) { + if (!udc->ep0_in) { + stat = 0; + /* read next OUT packet of request, maybe + * reactiviting the fifo; stall on errors. + */ + if (!req || (stat = read_fifo(ep0, req)) < 0) { + UDC_SYSCON2_REG = UDC_STALL_CMD; + udc->ep0_pending = 0; + stat = 0; + } else if (stat == 0) + UDC_CTRL_REG = UDC_SET_FIFO_EN; + UDC_EP_NUM_REG = 0; + + /* activate status stage */ + if (stat == 1) { + done(ep0, req, 0); + /* that may have STALLed ep0... */ + UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; + UDC_CTRL_REG = UDC_CLR_EP; + UDC_CTRL_REG = UDC_SET_FIFO_EN; + UDC_EP_NUM_REG = UDC_EP_DIR; + udc->ep0_pending = 0; + } + } else { + /* ack status stage of IN transfer */ + UDC_EP_NUM_REG = 0; + if (req) + done(ep0, req, 0); + } + } else if (stat & UDC_STALL) { + UDC_CTRL_REG = UDC_CLR_HALT; + UDC_EP_NUM_REG = 0; + } else { + UDC_EP_NUM_REG = 0; + } + } + + /* SETUP starts all control transfers */ + if (irq_src & UDC_SETUP) { + union u { + u16 word[4]; + struct usb_ctrlrequest r; + } u; + int status = -EINVAL; + struct omap_ep *ep; + + /* read the (latest) SETUP message */ + do { + UDC_EP_NUM_REG = UDC_SETUP_SEL; + /* two bytes at a time */ + u.word[0] = UDC_DATA_REG; + u.word[1] = UDC_DATA_REG; + u.word[2] = UDC_DATA_REG; + u.word[3] = UDC_DATA_REG; + UDC_EP_NUM_REG = 0; + } while (UDC_IRQ_SRC_REG & UDC_SETUP); + le16_to_cpus (&u.r.wValue); + le16_to_cpus (&u.r.wIndex); + le16_to_cpus (&u.r.wLength); + + /* Delegate almost all control requests to the gadget driver, + * except for a handful of ch9 status/feature requests that + * hardware doesn't autodecode _and_ the gadget API hides. + */ + udc->ep0_in = (u.r.bRequestType & USB_DIR_IN) != 0; + udc->ep0_set_config = 0; + udc->ep0_pending = 1; + ep0->stopped = 0; + ep0->ackwait = 0; + switch (u.r.bRequest) { + case USB_REQ_SET_CONFIGURATION: + /* udc needs to know when ep != 0 is valid */ + if (u.r.bRequestType != USB_RECIP_DEVICE) + goto delegate; + if (u.r.wLength != 0) + goto do_stall; + udc->ep0_set_config = 1; + udc->ep0_reset_config = (u.r.wValue == 0); + VDBG("set config %d\n", u.r.wValue); + + /* update udc NOW since gadget driver may start + * queueing requests immediately; clear config + * later if it fails the request. + */ + if (udc->ep0_reset_config) + UDC_SYSCON2_REG = UDC_CLR_CFG; + else + UDC_SYSCON2_REG = UDC_DEV_CFG; + update_otg(udc); + goto delegate; + case USB_REQ_CLEAR_FEATURE: + /* clear endpoint halt */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT + || u.r.wLength != 0) + goto do_stall; + ep = &udc->ep[u.r.wIndex & 0xf]; + if (ep != ep0) { + if (u.r.wIndex & USB_DIR_IN) + ep += 16; + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + || !ep->desc) + goto do_stall; + use_ep(ep, 0); + UDC_CTRL_REG = UDC_RESET_EP; + ep->ackwait = 0; + if (!(ep->bEndpointAddress & USB_DIR_IN)) { + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1 + ep->double_buf; + } + } + VDBG("%s halt cleared by host\n", ep->name); + goto ep0out_status_stage; + case USB_REQ_SET_FEATURE: + /* set endpoint halt */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT + || u.r.wLength != 0) + goto do_stall; + ep = &udc->ep[u.r.wIndex & 0xf]; + if (u.r.wIndex & USB_DIR_IN) + ep += 16; + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + || ep == ep0 || !ep->desc) + goto do_stall; + if (use_dma && ep->has_dma) { + /* this has rude side-effects (aborts) and + * can't really work if DMA-IN is active + */ + DBG("%s host set_halt, NYET \n", ep->name); + goto do_stall; + } + use_ep(ep, 0); + /* can't halt if fifo isn't empty... */ + UDC_CTRL_REG = UDC_CLR_EP; + UDC_CTRL_REG = UDC_SET_HALT; + VDBG("%s halted by host\n", ep->name); +ep0out_status_stage: + status = 0; + UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; + UDC_CTRL_REG = UDC_CLR_EP; + UDC_CTRL_REG = UDC_SET_FIFO_EN; + UDC_EP_NUM_REG = UDC_EP_DIR; + udc->ep0_pending = 0; + break; + case USB_REQ_GET_STATUS: + /* return interface status. if we were pedantic, + * we'd detect non-existent interfaces, and stall. + */ + if (u.r.bRequestType + != (USB_DIR_IN|USB_RECIP_INTERFACE)) + goto delegate; + /* return two zero bytes */ + UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR; + UDC_DATA_REG = 0; + UDC_CTRL_REG = UDC_SET_FIFO_EN; + UDC_EP_NUM_REG = UDC_EP_DIR; + status = 0; + VDBG("GET_STATUS, interface %d\n", u.r.wIndex); + /* next, status stage */ + break; + default: +delegate: + /* activate the ep0out fifo right away */ + if (!udc->ep0_in && u.r.wLength) { + UDC_EP_NUM_REG = 0; + UDC_CTRL_REG = UDC_SET_FIFO_EN; + } + + /* gadget drivers see class/vendor specific requests, + * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION}, + * and more + */ + VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + u.r.wValue, u.r.wIndex, u.r.wLength); + + /* The gadget driver may return an error here, + * causing an immediate protocol stall. + * + * Else it must issue a response, either queueing a + * response buffer for the DATA stage, or halting ep0 + * (causing a protocol stall, not a real halt). A + * zero length buffer means no DATA stage. + * + * It's fine to issue that response after the setup() + * call returns, and this IRQ was handled. + */ + udc->ep0_setup = 1; + spin_unlock(&udc->lock); + status = udc->driver->setup (&udc->gadget, &u.r); + spin_lock(&udc->lock); + udc->ep0_setup = 0; + } + + if (status < 0) { +do_stall: + VDBG("req %02x.%02x protocol STALL; stat %d\n", + u.r.bRequestType, u.r.bRequest, status); + if (udc->ep0_set_config) { + if (udc->ep0_reset_config) + WARN("error resetting config?\n"); + else + UDC_SYSCON2_REG = UDC_CLR_CFG; + } + UDC_SYSCON2_REG = UDC_STALL_CMD; + udc->ep0_pending = 0; + } + } +} + +/*-------------------------------------------------------------------------*/ + +#define OTG_FLAGS (UDC_B_HNP_ENABLE|UDC_A_HNP_SUPPORT|UDC_A_ALT_HNP_SUPPORT) + +static void devstate_irq(struct omap_udc *udc, u16 irq_src) +{ + u16 devstat, change; + + devstat = UDC_DEVSTAT_REG; + change = devstat ^ udc->devstat; + udc->devstat = devstat; + + if (change & (UDC_USB_RESET|UDC_ATT)) { + udc_quiesce(udc); + + if (change & UDC_ATT) { + /* driver for any external transceiver will + * have called omap_vbus_session() already + */ + if (devstat & UDC_ATT) { + udc->gadget.speed = USB_SPEED_FULL; + VDBG("connect\n"); + if (!udc->transceiver) + pullup_enable(udc); + // if (driver->connect) call it + } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + if (!udc->transceiver) + pullup_disable(udc); + DBG("disconnect, gadget %s\n", + udc->driver->driver.name); + if (udc->driver->disconnect) { + spin_unlock(&udc->lock); + udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + } + change &= ~UDC_ATT; + } + + if (change & UDC_USB_RESET) { + if (devstat & UDC_USB_RESET) { + VDBG("RESET=1\n"); + } else { + udc->gadget.speed = USB_SPEED_FULL; + INFO("USB reset done, gadget %s\n", + udc->driver->driver.name); + /* ep0 traffic is legal from now on */ + UDC_IRQ_EN_REG = UDC_DS_CHG_IE | UDC_EP0_IE; + } + change &= ~UDC_USB_RESET; + } + } + if (change & UDC_SUS) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + // FIXME tell isp1301 to suspend/resume (?) + if (devstat & UDC_SUS) { + VDBG("suspend\n"); + update_otg(udc); + /* HNP could be under way already */ + if (udc->gadget.speed == USB_SPEED_FULL + && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } else { + VDBG("resume\n"); + if (udc->gadget.speed == USB_SPEED_FULL + && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + } + change &= ~UDC_SUS; + } + if (!cpu_is_omap15xx() && (change & OTG_FLAGS)) { + update_otg(udc); + change &= ~OTG_FLAGS; + } + + change &= ~(UDC_CFG|UDC_DEF|UDC_ADD); + if (change) + VDBG("devstat %03x, ignore change %03x\n", + devstat, change); + + UDC_IRQ_SRC_REG = UDC_DS_CHG; +} + +static irqreturn_t +omap_udc_irq(int irq, void *_udc, struct pt_regs *r) +{ + struct omap_udc *udc = _udc; + u16 irq_src; + irqreturn_t status = IRQ_NONE; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + irq_src = UDC_IRQ_SRC_REG; + + /* Device state change (usb ch9 stuff) */ + if (irq_src & UDC_DS_CHG) { + devstate_irq(_udc, irq_src); + status = IRQ_HANDLED; + irq_src &= ~UDC_DS_CHG; + } + + /* EP0 control transfers */ + if (irq_src & (UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX)) { + ep0_irq(_udc, irq_src); + status = IRQ_HANDLED; + irq_src &= ~(UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX); + } + + /* DMA transfer completion */ + if (use_dma && (irq_src & (UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT))) { + dma_irq(_udc, irq_src); + status = IRQ_HANDLED; + irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT); + } + + irq_src &= ~(UDC_SOF|UDC_EPN_TX|UDC_EPN_RX); + if (irq_src) + DBG("udc_irq, unhandled %03x\n", irq_src); + spin_unlock_irqrestore(&udc->lock, flags); + + return status; +} + +/* workaround for seemingly-lost IRQs for RX ACKs... */ +#define PIO_OUT_TIMEOUT (jiffies + HZ/3) +#define HALF_FULL(f) (!((f)&(UDC_NON_ISO_FIFO_FULL|UDC_NON_ISO_FIFO_EMPTY))) + +static void pio_out_timer(unsigned long _ep) +{ + struct omap_ep *ep = (void *) _ep; + unsigned long flags; + u16 stat_flg; + + spin_lock_irqsave(&ep->udc->lock, flags); + if (!list_empty(&ep->queue) && ep->ackwait) { + use_ep(ep, 0); + stat_flg = UDC_STAT_FLG_REG; + + if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN) + || (ep->double_buf && HALF_FULL(stat_flg)))) { + struct omap_req *req; + + VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg); + req = container_of(ep->queue.next, + struct omap_req, queue); + UDC_EP_NUM_REG = ep->bEndpointAddress | UDC_EP_SEL; + (void) read_fifo(ep, req); + UDC_EP_NUM_REG = ep->bEndpointAddress; + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1 + ep->double_buf; + } + } + mod_timer(&ep->timer, PIO_OUT_TIMEOUT); + spin_unlock_irqrestore(&ep->udc->lock, flags); +} + +static irqreturn_t +omap_udc_pio_irq(int irq, void *_dev, struct pt_regs *r) +{ + u16 epn_stat, irq_src; + irqreturn_t status = IRQ_NONE; + struct omap_ep *ep; + int epnum; + struct omap_udc *udc = _dev; + struct omap_req *req; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + epn_stat = UDC_EPN_STAT_REG; + irq_src = UDC_IRQ_SRC_REG; + + /* handle OUT first, to avoid some wasteful NAKs */ + if (irq_src & UDC_EPN_RX) { + epnum = (epn_stat >> 8) & 0x0f; + UDC_IRQ_SRC_REG = UDC_EPN_RX; + status = IRQ_HANDLED; + ep = &udc->ep[epnum]; + ep->irqs++; + + UDC_EP_NUM_REG = epnum | UDC_EP_SEL; + ep->fnf = 0; + if ((UDC_STAT_FLG_REG & UDC_ACK)) { + ep->ackwait--; + if (!list_empty(&ep->queue)) { + int stat; + req = container_of(ep->queue.next, + struct omap_req, queue); + stat = read_fifo(ep, req); + if (!ep->double_buf) + ep->fnf = 1; + } + } + /* min 6 clock delay before clearing EP_SEL ... */ + epn_stat = UDC_EPN_STAT_REG; + epn_stat = UDC_EPN_STAT_REG; + UDC_EP_NUM_REG = epnum; + + /* enabling fifo _after_ clearing ACK, contrary to docs, + * reduces lossage; timer still needed though (sigh). + */ + if (ep->fnf) { + UDC_CTRL_REG = UDC_SET_FIFO_EN; + ep->ackwait = 1 + ep->double_buf; + } + mod_timer(&ep->timer, PIO_OUT_TIMEOUT); + } + + /* then IN transfers */ + else if (irq_src & UDC_EPN_TX) { + epnum = epn_stat & 0x0f; + UDC_IRQ_SRC_REG = UDC_EPN_TX; + status = IRQ_HANDLED; + ep = &udc->ep[16 + epnum]; + ep->irqs++; + + UDC_EP_NUM_REG = epnum | UDC_EP_DIR | UDC_EP_SEL; + if ((UDC_STAT_FLG_REG & UDC_ACK)) { + ep->ackwait = 0; + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + (void) write_fifo(ep, req); + } + } + /* min 6 clock delay before clearing EP_SEL ... */ + epn_stat = UDC_EPN_STAT_REG; + epn_stat = UDC_EPN_STAT_REG; + UDC_EP_NUM_REG = epnum | UDC_EP_DIR; + /* then 6 clocks before it'd tx */ + } + + spin_unlock_irqrestore(&udc->lock, flags); + return status; +} + +#ifdef USE_ISO +static irqreturn_t +omap_udc_iso_irq(int irq, void *_dev, struct pt_regs *r) +{ + struct omap_udc *udc = _dev; + struct omap_ep *ep; + int pending = 0; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + /* handle all non-DMA ISO transfers */ + list_for_each_entry (ep, &udc->iso, iso) { + u16 stat; + struct omap_req *req; + + if (ep->has_dma || list_empty(&ep->queue)) + continue; + req = list_entry(ep->queue.next, struct omap_req, queue); + + use_ep(ep, UDC_EP_SEL); + stat = UDC_STAT_FLG_REG; + + /* NOTE: like the other controller drivers, this isn't + * currently reporting lost or damaged frames. + */ + if (ep->bEndpointAddress & USB_DIR_IN) { + if (stat & UDC_MISS_IN) + /* done(ep, req, -EPROTO) */; + else + write_fifo(ep, req); + } else { + int status = 0; + + if (stat & UDC_NO_RXPACKET) + status = -EREMOTEIO; + else if (stat & UDC_ISO_ERR) + status = -EILSEQ; + else if (stat & UDC_DATA_FLUSH) + status = -ENOSR; + + if (status) + /* done(ep, req, status) */; + else + read_fifo(ep, req); + } + deselect_ep(); + /* 6 wait states before next EP */ + + ep->irqs++; + if (!list_empty(&ep->queue)) + pending = 1; + } + if (!pending) + UDC_IRQ_EN_REG &= ~UDC_SOF_IE; + UDC_IRQ_SRC_REG = UDC_SOF; + + spin_unlock_irqrestore(&udc->lock, flags); + return IRQ_HANDLED; +} +#endif + +/*-------------------------------------------------------------------------*/ + +static struct omap_udc *udc; + +int usb_gadget_register_driver (struct usb_gadget_driver *driver) +{ + int status = -ENODEV; + struct omap_ep *ep; + unsigned long flags; + + /* basic sanity tests */ + if (!udc) + return -ENODEV; + if (!driver + // FIXME if otg, check: driver->is_otg + || driver->speed < USB_SPEED_FULL + || !driver->bind + || !driver->unbind + || !driver->setup) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (udc->driver) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EBUSY; + } + + /* reset state */ + list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { + ep->irqs = 0; + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + continue; + use_ep(ep, 0); + UDC_CTRL_REG = UDC_SET_HALT; + } + udc->ep0_pending = 0; + udc->ep[0].irqs = 0; + udc->softconnect = 1; + + /* hook up the driver */ + driver->driver.bus = 0; + udc->driver = driver; + udc->gadget.dev.driver = &driver->driver; + spin_unlock_irqrestore(&udc->lock, flags); + + status = driver->bind (&udc->gadget); + if (status) { + DBG("bind to %s --> %d\n", driver->driver.name, status); + udc->gadget.dev.driver = 0; + udc->driver = 0; + goto done; + } + DBG("bound to driver %s\n", driver->driver.name); + + UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK; + + /* connect to bus through transceiver */ + if (udc->transceiver) { + status = otg_set_peripheral(udc->transceiver, &udc->gadget); + if (status < 0) { + ERR("can't bind to transceiver\n"); + driver->unbind (&udc->gadget); + udc->gadget.dev.driver = 0; + udc->driver = 0; + goto done; + } + } else { + if (can_pullup(udc)) + pullup_enable (udc); + else + pullup_disable (udc); + } + + /* boards that don't have VBUS sensing can't autogate 48MHz; + * can't enter deep sleep while a gadget driver is active. + */ + if (machine_is_omap_innovator() || machine_is_omap_osk()) + omap_vbus_session(&udc->gadget, 1); + +done: + return status; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) +{ + unsigned long flags; + int status = -ENODEV; + + if (!udc) + return -ENODEV; + if (!driver || driver != udc->driver) + return -EINVAL; + + if (machine_is_omap_innovator() || machine_is_omap_osk()) + omap_vbus_session(&udc->gadget, 0); + + if (udc->transceiver) + (void) otg_set_peripheral(udc->transceiver, 0); + else + pullup_disable(udc); + + spin_lock_irqsave(&udc->lock, flags); + udc_quiesce(udc); + spin_unlock_irqrestore(&udc->lock, flags); + + driver->unbind(&udc->gadget); + udc->gadget.dev.driver = 0; + udc->driver = 0; + + + DBG("unregistered driver '%s'\n", driver->driver.name); + return status; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +#include <linux/seq_file.h> + +static const char proc_filename[] = "driver/udc"; + +#define FOURBITS "%s%s%s%s" +#define EIGHTBITS FOURBITS FOURBITS + +static void proc_ep_show(struct seq_file *s, struct omap_ep *ep) +{ + u16 stat_flg; + struct omap_req *req; + char buf[20]; + + use_ep(ep, 0); + + if (use_dma && ep->has_dma) + snprintf(buf, sizeof buf, "(%cxdma%d lch%d) ", + (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r', + ep->dma_channel - 1, ep->lch); + else + buf[0] = 0; + + stat_flg = UDC_STAT_FLG_REG; + seq_printf(s, + "\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n", + ep->name, buf, + ep->double_buf ? "dbuf " : "", + ({char *s; switch(ep->ackwait){ + case 0: s = ""; break; + case 1: s = "(ackw) "; break; + case 2: s = "(ackw2) "; break; + default: s = "(?) "; break; + } s;}), + ep->irqs, stat_flg, + (stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "", + (stat_flg & UDC_MISS_IN) ? "miss_in " : "", + (stat_flg & UDC_DATA_FLUSH) ? "data_flush " : "", + (stat_flg & UDC_ISO_ERR) ? "iso_err " : "", + (stat_flg & UDC_ISO_FIFO_EMPTY) ? "iso_fifo_empty " : "", + (stat_flg & UDC_ISO_FIFO_FULL) ? "iso_fifo_full " : "", + (stat_flg & UDC_EP_HALTED) ? "HALT " : "", + (stat_flg & UDC_STALL) ? "STALL " : "", + (stat_flg & UDC_NAK) ? "NAK " : "", + (stat_flg & UDC_ACK) ? "ACK " : "", + (stat_flg & UDC_FIFO_EN) ? "fifo_en " : "", + (stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "", + (stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : ""); + + if (list_empty (&ep->queue)) + seq_printf(s, "\t(queue empty)\n"); + else + list_for_each_entry (req, &ep->queue, queue) { + unsigned length = req->req.actual; + + if (use_dma && buf[0]) { + length += ((ep->bEndpointAddress & USB_DIR_IN) + ? dma_src_len : dma_dest_len) + (ep, req->req.dma + length); + buf[0] = 0; + } + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, length, + req->req.length, req->req.buf); + } +} + +static char *trx_mode(unsigned m, int enabled) +{ + switch (m) { + case 0: return enabled ? "*6wire" : "unused"; + case 1: return "4wire"; + case 2: return "3wire"; + case 3: return "6wire"; + default: return "unknown"; + } +} + +static int proc_otg_show(struct seq_file *s) +{ + u32 tmp; + u32 trans; + + tmp = OTG_REV_REG; + trans = USB_TRANSCEIVER_CTRL_REG; + seq_printf(s, "OTG rev %d.%d, transceiver_ctrl %03x\n", + tmp >> 4, tmp & 0xf, trans); + tmp = OTG_SYSCON_1_REG; + seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s," + FOURBITS "\n", tmp, + trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R), + trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R), + (USB0_TRX_MODE(tmp) == 0) + ? "internal" + : trx_mode(USB0_TRX_MODE(tmp), 1), + (tmp & OTG_IDLE_EN) ? " !otg" : "", + (tmp & HST_IDLE_EN) ? " !host" : "", + (tmp & DEV_IDLE_EN) ? " !dev" : "", + (tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active"); + tmp = OTG_SYSCON_2_REG; + seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS + " b_ase_brst=%d hmc=%d\n", tmp, + (tmp & OTG_EN) ? " otg_en" : "", + (tmp & USBX_SYNCHRO) ? " synchro" : "", + // much more SRP stuff + (tmp & SRP_DATA) ? " srp_data" : "", + (tmp & SRP_VBUS) ? " srp_vbus" : "", + (tmp & OTG_PADEN) ? " otg_paden" : "", + (tmp & HMC_PADEN) ? " hmc_paden" : "", + (tmp & UHOST_EN) ? " uhost_en" : "", + (tmp & HMC_TLLSPEED) ? " tllspeed" : "", + (tmp & HMC_TLLATTACH) ? " tllattach" : "", + B_ASE_BRST(tmp), + OTG_HMC(tmp)); + tmp = OTG_CTRL_REG; + seq_printf(s, "otg_ctrl %06x" EIGHTBITS EIGHTBITS "%s\n", tmp, + (tmp & OTG_ASESSVLD) ? " asess" : "", + (tmp & OTG_BSESSEND) ? " bsess_end" : "", + (tmp & OTG_BSESSVLD) ? " bsess" : "", + (tmp & OTG_VBUSVLD) ? " vbus" : "", + (tmp & OTG_ID) ? " id" : "", + (tmp & OTG_DRIVER_SEL) ? " DEVICE" : " HOST", + (tmp & OTG_A_SETB_HNPEN) ? " a_setb_hnpen" : "", + (tmp & OTG_A_BUSREQ) ? " a_bus" : "", + (tmp & OTG_B_HNPEN) ? " b_hnpen" : "", + (tmp & OTG_B_BUSREQ) ? " b_bus" : "", + (tmp & OTG_BUSDROP) ? " busdrop" : "", + (tmp & OTG_PULLDOWN) ? " down" : "", + (tmp & OTG_PULLUP) ? " up" : "", + (tmp & OTG_DRV_VBUS) ? " drv" : "", + (tmp & OTG_PD_VBUS) ? " pd_vb" : "", + (tmp & OTG_PU_VBUS) ? " pu_vb" : "", + (tmp & OTG_PU_ID) ? " pu_id" : "" + ); + tmp = OTG_IRQ_EN_REG; + seq_printf(s, "otg_irq_en %04x" "\n", tmp); + tmp = OTG_IRQ_SRC_REG; + seq_printf(s, "otg_irq_src %04x" "\n", tmp); + tmp = OTG_OUTCTRL_REG; + seq_printf(s, "otg_outctrl %04x" "\n", tmp); + tmp = OTG_TEST_REG; + seq_printf(s, "otg_test %04x" "\n", tmp); +} + +static int proc_udc_show(struct seq_file *s, void *_) +{ + u32 tmp; + struct omap_ep *ep; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + seq_printf(s, "%s, version: " DRIVER_VERSION +#ifdef USE_ISO + " (iso)" +#endif + "%s\n", + driver_desc, + use_dma ? " (dma)" : ""); + + tmp = UDC_REV_REG & 0xff; + seq_printf(s, + "UDC rev %d.%d, fifo mode %d, gadget %s\n" + "hmc %d, transceiver %s\n", + tmp >> 4, tmp & 0xf, + fifo_mode, + udc->driver ? udc->driver->driver.name : "(none)", + HMC, + udc->transceiver ? udc->transceiver->label : "(none)"); + seq_printf(s, "ULPD control %04x req %04x status %04x\n", + __REG16(ULPD_CLOCK_CTRL), + __REG16(ULPD_SOFT_REQ), + __REG16(ULPD_STATUS_REQ)); + + /* OTG controller registers */ + if (!cpu_is_omap15xx()) + proc_otg_show(s); + + tmp = UDC_SYSCON1_REG; + seq_printf(s, "\nsyscon1 %04x" EIGHTBITS "\n", tmp, + (tmp & UDC_CFG_LOCK) ? " cfg_lock" : "", + (tmp & UDC_DATA_ENDIAN) ? " data_endian" : "", + (tmp & UDC_DMA_ENDIAN) ? " dma_endian" : "", + (tmp & UDC_NAK_EN) ? " nak" : "", + (tmp & UDC_AUTODECODE_DIS) ? " autodecode_dis" : "", + (tmp & UDC_SELF_PWR) ? " self_pwr" : "", + (tmp & UDC_SOFF_DIS) ? " soff_dis" : "", + (tmp & UDC_PULLUP_EN) ? " PULLUP" : ""); + // syscon2 is write-only + + /* UDC controller registers */ + if (!(tmp & UDC_PULLUP_EN)) { + seq_printf(s, "(suspended)\n"); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; + } + + tmp = UDC_DEVSTAT_REG; + seq_printf(s, "devstat %04x" EIGHTBITS "%s%s\n", tmp, + (tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "", + (tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "", + (tmp & UDC_A_ALT_HNP_SUPPORT) ? " a_alt_hnp" : "", + (tmp & UDC_R_WK_OK) ? " r_wk_ok" : "", + (tmp & UDC_USB_RESET) ? " usb_reset" : "", + (tmp & UDC_SUS) ? " SUS" : "", + (tmp & UDC_CFG) ? " CFG" : "", + (tmp & UDC_ADD) ? " ADD" : "", + (tmp & UDC_DEF) ? " DEF" : "", + (tmp & UDC_ATT) ? " ATT" : ""); + seq_printf(s, "sof %04x\n", UDC_SOF_REG); + tmp = UDC_IRQ_EN_REG; + seq_printf(s, "irq_en %04x" FOURBITS "%s\n", tmp, + (tmp & UDC_SOF_IE) ? " sof" : "", + (tmp & UDC_EPN_RX_IE) ? " epn_rx" : "", + (tmp & UDC_EPN_TX_IE) ? " epn_tx" : "", + (tmp & UDC_DS_CHG_IE) ? " ds_chg" : "", + (tmp & UDC_EP0_IE) ? " ep0" : ""); + tmp = UDC_IRQ_SRC_REG; + seq_printf(s, "irq_src %04x" EIGHTBITS "%s%s\n", tmp, + (tmp & UDC_TXN_DONE) ? " txn_done" : "", + (tmp & UDC_RXN_CNT) ? " rxn_cnt" : "", + (tmp & UDC_RXN_EOT) ? " rxn_eot" : "", + (tmp & UDC_SOF) ? " sof" : "", + (tmp & UDC_EPN_RX) ? " epn_rx" : "", + (tmp & UDC_EPN_TX) ? " epn_tx" : "", + (tmp & UDC_DS_CHG) ? " ds_chg" : "", + (tmp & UDC_SETUP) ? " setup" : "", + (tmp & UDC_EP0_RX) ? " ep0out" : "", + (tmp & UDC_EP0_TX) ? " ep0in" : ""); + if (use_dma) { + unsigned i; + + tmp = UDC_DMA_IRQ_EN_REG; + seq_printf(s, "dma_irq_en %04x%s" EIGHTBITS "\n", tmp, + (tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "", + (tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "", + (tmp & UDC_RX_EOT_IE(3)) ? " rx2_eot" : "", + + (tmp & UDC_TX_DONE_IE(2)) ? " tx1_done" : "", + (tmp & UDC_RX_CNT_IE(2)) ? " rx1_cnt" : "", + (tmp & UDC_RX_EOT_IE(2)) ? " rx1_eot" : "", + + (tmp & UDC_TX_DONE_IE(1)) ? " tx0_done" : "", + (tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "", + (tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : ""); + + tmp = UDC_RXDMA_CFG_REG; + seq_printf(s, "rxdma_cfg %04x\n", tmp); + if (tmp) { + for (i = 0; i < 3; i++) { + if ((tmp & (0x0f << (i * 4))) == 0) + continue; + seq_printf(s, "rxdma[%d] %04x\n", i, + UDC_RXDMA_REG(i + 1)); + } + } + tmp = UDC_TXDMA_CFG_REG; + seq_printf(s, "txdma_cfg %04x\n", tmp); + if (tmp) { + for (i = 0; i < 3; i++) { + if (!(tmp & (0x0f << (i * 4)))) + continue; + seq_printf(s, "txdma[%d] %04x\n", i, + UDC_TXDMA_REG(i + 1)); + } + } + } + + tmp = UDC_DEVSTAT_REG; + if (tmp & UDC_ATT) { + proc_ep_show(s, &udc->ep[0]); + if (tmp & UDC_ADD) { + list_for_each_entry (ep, &udc->gadget.ep_list, + ep.ep_list) { + if (ep->desc) + proc_ep_show(s, ep); + } + } + } + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int proc_udc_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_udc_show, 0); +} + +static struct file_operations proc_ops = { + .open = proc_udc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void create_proc_file(void) +{ + struct proc_dir_entry *pde; + + pde = create_proc_entry (proc_filename, 0, NULL); + if (pde) + pde->proc_fops = &proc_ops; +} + +static void remove_proc_file(void) +{ + remove_proc_entry(proc_filename, 0); +} + +#else + +static inline void create_proc_file(void) {} +static inline void remove_proc_file(void) {} + +#endif + +/*-------------------------------------------------------------------------*/ + +/* Before this controller can enumerate, we need to pick an endpoint + * configuration, or "fifo_mode" That involves allocating 2KB of packet + * buffer space among the endpoints we'll be operating. + */ +static unsigned __init +omap_ep_setup(char *name, u8 addr, u8 type, + unsigned buf, unsigned maxp, int dbuf) +{ + struct omap_ep *ep; + u16 epn_rxtx = 0; + + /* OUT endpoints first, then IN */ + ep = &udc->ep[addr & 0xf]; + if (addr & USB_DIR_IN) + ep += 16; + + /* in case of ep init table bugs */ + BUG_ON(ep->name[0]); + + /* chip setup ... bit values are same for IN, OUT */ + if (type == USB_ENDPOINT_XFER_ISOC) { + switch (maxp) { + case 8: epn_rxtx = 0 << 12; break; + case 16: epn_rxtx = 1 << 12; break; + case 32: epn_rxtx = 2 << 12; break; + case 64: epn_rxtx = 3 << 12; break; + case 128: epn_rxtx = 4 << 12; break; + case 256: epn_rxtx = 5 << 12; break; + case 512: epn_rxtx = 6 << 12; break; + default: BUG(); + } + epn_rxtx |= UDC_EPN_RX_ISO; + dbuf = 1; + } else { + /* double-buffering "not supported" on 15xx, + * and ignored for PIO-IN on 16xx + */ + if (!use_dma || cpu_is_omap15xx()) + dbuf = 0; + + switch (maxp) { + case 8: epn_rxtx = 0 << 12; break; + case 16: epn_rxtx = 1 << 12; break; + case 32: epn_rxtx = 2 << 12; break; + case 64: epn_rxtx = 3 << 12; break; + default: BUG(); + } + if (dbuf && addr) + epn_rxtx |= UDC_EPN_RX_DB; + init_timer(&ep->timer); + ep->timer.function = pio_out_timer; + ep->timer.data = (unsigned long) ep; + } + if (addr) + epn_rxtx |= UDC_EPN_RX_VALID; + BUG_ON(buf & 0x07); + epn_rxtx |= buf >> 3; + + DBG("%s addr %02x rxtx %04x maxp %d%s buf %d\n", + name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf); + + if (addr & USB_DIR_IN) + UDC_EP_TX_REG(addr & 0xf) = epn_rxtx; + else + UDC_EP_RX_REG(addr) = epn_rxtx; + + /* next endpoint's buffer starts after this one's */ + buf += maxp; + if (dbuf) + buf += maxp; + BUG_ON(buf > 2048); + + /* set up driver data structures */ + BUG_ON(strlen(name) >= sizeof ep->name); + strlcpy(ep->name, name, sizeof ep->name); + INIT_LIST_HEAD(&ep->queue); + INIT_LIST_HEAD(&ep->iso); + ep->bEndpointAddress = addr; + ep->bmAttributes = type; + ep->double_buf = dbuf; + ep->udc = udc; + + ep->ep.name = ep->name; + ep->ep.ops = &omap_ep_ops; + ep->ep.maxpacket = ep->maxpacket = maxp; + list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list); + + return buf; +} + +static void omap_udc_release(struct device *dev) +{ + complete(udc->done); + kfree (udc); + udc = 0; +} + +static int __init +omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv) +{ + unsigned tmp, buf; + + /* abolish any previous hardware state */ + UDC_SYSCON1_REG = 0; + UDC_IRQ_EN_REG = 0; + UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK; + UDC_DMA_IRQ_EN_REG = 0; + UDC_RXDMA_CFG_REG = 0; + UDC_TXDMA_CFG_REG = 0; + + /* UDC_PULLUP_EN gates the chip clock */ + // OTG_SYSCON_1_REG |= DEV_IDLE_EN; + + udc = kmalloc (sizeof *udc, SLAB_KERNEL); + if (!udc) + return -ENOMEM; + + memset(udc, 0, sizeof *udc); + spin_lock_init (&udc->lock); + + udc->gadget.ops = &omap_gadget_ops; + udc->gadget.ep0 = &udc->ep[0].ep; + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&udc->iso); + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->gadget.name = driver_name; + + device_initialize(&udc->gadget.dev); + strcpy (udc->gadget.dev.bus_id, "gadget"); + udc->gadget.dev.release = omap_udc_release; + udc->gadget.dev.parent = &odev->dev; + if (use_dma) + udc->gadget.dev.dma_mask = odev->dev.dma_mask; + + udc->transceiver = xceiv; + + /* ep0 is special; put it right after the SETUP buffer */ + buf = omap_ep_setup("ep0", 0, USB_ENDPOINT_XFER_CONTROL, + 8 /* after SETUP */, 64 /* maxpacket */, 0); + list_del_init(&udc->ep[0].ep.ep_list); + + /* initially disable all non-ep0 endpoints */ + for (tmp = 1; tmp < 15; tmp++) { + UDC_EP_RX_REG(tmp) = 0; + UDC_EP_TX_REG(tmp) = 0; + } + +#define OMAP_BULK_EP(name,addr) \ + buf = omap_ep_setup(name "-bulk", addr, \ + USB_ENDPOINT_XFER_BULK, buf, 64, 1); +#define OMAP_INT_EP(name,addr, maxp) \ + buf = omap_ep_setup(name "-int", addr, \ + USB_ENDPOINT_XFER_INT, buf, maxp, 0); +#define OMAP_ISO_EP(name,addr, maxp) \ + buf = omap_ep_setup(name "-iso", addr, \ + USB_ENDPOINT_XFER_ISOC, buf, maxp, 1); + + switch (fifo_mode) { + case 0: + OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); + OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); + OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16); + break; + case 1: + OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); + OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); + OMAP_BULK_EP("ep3in", USB_DIR_IN | 3); + OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4); + + OMAP_BULK_EP("ep5in", USB_DIR_IN | 5); + OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5); + OMAP_BULK_EP("ep6in", USB_DIR_IN | 6); + OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6); + + OMAP_BULK_EP("ep7in", USB_DIR_IN | 7); + OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7); + OMAP_BULK_EP("ep8in", USB_DIR_IN | 8); + OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8); + + OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16); + OMAP_INT_EP("ep10out", USB_DIR_IN | 10, 16); + OMAP_INT_EP("ep11in", USB_DIR_IN | 9, 16); + OMAP_INT_EP("ep12out", USB_DIR_IN | 10, 16); + break; + +#ifdef USE_ISO + case 2: /* mixed iso/bulk */ + OMAP_ISO_EP("ep1in", USB_DIR_IN | 1, 256); + OMAP_ISO_EP("ep2out", USB_DIR_OUT | 2, 256); + OMAP_ISO_EP("ep3in", USB_DIR_IN | 3, 128); + OMAP_ISO_EP("ep4out", USB_DIR_OUT | 4, 128); + + OMAP_INT_EP("ep5in", USB_DIR_IN | 5, 16); + + OMAP_BULK_EP("ep6in", USB_DIR_IN | 6); + OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7); + OMAP_INT_EP("ep8in", USB_DIR_IN | 8, 16); + break; + case 3: /* mixed bulk/iso */ + OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); + OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); + OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16); + + OMAP_BULK_EP("ep4in", USB_DIR_IN | 4); + OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5); + OMAP_INT_EP("ep6in", USB_DIR_IN | 6, 16); + + OMAP_ISO_EP("ep7in", USB_DIR_IN | 7, 256); + OMAP_ISO_EP("ep8out", USB_DIR_OUT | 8, 256); + OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16); + break; +#endif + + /* add more modes as needed */ + + default: + ERR("unsupported fifo_mode #%d\n", fifo_mode); + return -ENODEV; + } + UDC_SYSCON1_REG = UDC_CFG_LOCK|UDC_SELF_PWR; + INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf); + return 0; +} + +static int __init omap_udc_probe(struct device *dev) +{ + struct platform_device *odev = to_platform_device(dev); + int status = -ENODEV; + int hmc; + struct otg_transceiver *xceiv = 0; + const char *type = 0; + struct omap_usb_config *config = dev->platform_data; + + /* NOTE: "knows" the order of the resources! */ + if (!request_mem_region(odev->resource[0].start, + odev->resource[0].end - odev->resource[0].start + 1, + driver_name)) { + DBG("request_mem_region failed\n"); + return -EBUSY; + } + + INFO("OMAP UDC rev %d.%d%s\n", + UDC_REV_REG >> 4, UDC_REV_REG & 0xf, + config->otg ? ", Mini-AB" : ""); + + /* use the mode given to us by board init code */ + if (cpu_is_omap15xx()) { + hmc = HMC_1510; + type = "(unknown)"; + + if (machine_is_omap_innovator()) { + /* just set up software VBUS detect, and then + * later rig it so we always report VBUS. + * FIXME without really sensing VBUS, we can't + * know when to turn PULLUP_EN on/off; and that + * means we always "need" the 48MHz clock. + */ + u32 tmp = FUNC_MUX_CTRL_0_REG; + + FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510; + tmp |= VBUS_MODE_1510; + tmp &= ~VBUS_CTRL_1510; + FUNC_MUX_CTRL_0_REG = tmp; + } + } else { + hmc = HMC_1610; + switch (hmc) { + case 3: + case 11: + case 16: + case 19: + case 25: + xceiv = otg_get_transceiver(); + if (!xceiv) { + DBG("external transceiver not registered!\n"); + if (config->otg) + goto cleanup0; + type = "(unknown external)"; + } else + type = xceiv->label; + break; + case 0: /* POWERUP DEFAULT == 0 */ + case 4: + case 12: + case 20: + type = "INTEGRATED"; + break; + case 21: /* internal loopback */ + type = "(loopback)"; + break; + case 14: /* transceiverless */ + type = "(none)"; + break; + + default: + ERR("unrecognized UDC HMC mode %d\n", hmc); + return -ENODEV; + } + } + INFO("hmc mode %d, transceiver %s\n", hmc, type); + + /* a "gadget" abstracts/virtualizes the controller */ + status = omap_udc_setup(odev, xceiv); + if (status) { + goto cleanup0; + } + xceiv = 0; + // "udc" is now valid + pullup_disable(udc); +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + udc->gadget.is_otg = (config->otg != 0); +#endif + + /* USB general purpose IRQ: ep0, state changes, dma, etc */ + status = request_irq(odev->resource[1].start, omap_udc_irq, + SA_SAMPLE_RANDOM, driver_name, udc); + if (status != 0) { + ERR( "can't get irq %ld, err %d\n", + odev->resource[1].start, status); + goto cleanup1; + } + + /* USB "non-iso" IRQ (PIO for all but ep0) */ + status = request_irq(odev->resource[2].start, omap_udc_pio_irq, + SA_SAMPLE_RANDOM, "omap_udc pio", udc); + if (status != 0) { + ERR( "can't get irq %ld, err %d\n", + odev->resource[2].start, status); + goto cleanup2; + } +#ifdef USE_ISO + status = request_irq(odev->resource[3].start, omap_udc_iso_irq, + SA_INTERRUPT, "omap_udc iso", udc); + if (status != 0) { + ERR("can't get irq %ld, err %d\n", + odev->resource[3].start, status); + goto cleanup3; + } +#endif + + create_proc_file(); + device_add(&udc->gadget.dev); + return 0; + +#ifdef USE_ISO +cleanup3: + free_irq(odev->resource[2].start, udc); +#endif + +cleanup2: + free_irq(odev->resource[1].start, udc); + +cleanup1: + kfree (udc); + udc = 0; + +cleanup0: + if (xceiv) + put_device(xceiv->dev); + release_mem_region(odev->resource[0].start, + odev->resource[0].end - odev->resource[0].start + 1); + return status; +} + +static int __exit omap_udc_remove(struct device *dev) +{ + struct platform_device *odev = to_platform_device(dev); + DECLARE_COMPLETION(done); + + if (!udc) + return -ENODEV; + + udc->done = &done; + + pullup_disable(udc); + if (udc->transceiver) { + put_device(udc->transceiver->dev); + udc->transceiver = 0; + } + UDC_SYSCON1_REG = 0; + + remove_proc_file(); + +#ifdef USE_ISO + free_irq(odev->resource[3].start, udc); +#endif + free_irq(odev->resource[2].start, udc); + free_irq(odev->resource[1].start, udc); + + release_mem_region(odev->resource[0].start, + odev->resource[0].end - odev->resource[0].start + 1); + + device_unregister(&udc->gadget.dev); + wait_for_completion(&done); + + return 0; +} + +/* suspend/resume/wakeup from sysfs (echo > power/state) */ + +static int omap_udc_suspend(struct device *dev, u32 state, u32 level) +{ + if (level != 0) + return 0; + + DBG("suspend, state %d\n", state); + omap_pullup(&udc->gadget, 0); + udc->gadget.dev.power.power_state = 3; + udc->gadget.dev.parent->power.power_state = 3; + return 0; +} + +static int omap_udc_resume(struct device *dev, u32 level) +{ + if (level != 0) + return 0; + + DBG("resume + wakeup/SRP\n"); + udc->gadget.dev.parent->power.power_state = 0; + udc->gadget.dev.power.power_state = 0; + omap_pullup(&udc->gadget, 1); + + /* maybe the host would enumerate us if we nudged it */ + msleep(100); + return omap_wakeup(&udc->gadget); +} + +/*-------------------------------------------------------------------------*/ + +static struct device_driver udc_driver = { + .name = (char *) driver_name, + .bus = &platform_bus_type, + .probe = omap_udc_probe, + .remove = __exit_p(omap_udc_remove), + .suspend = omap_udc_suspend, + .resume = omap_udc_resume, +}; + +static int __init udc_init(void) +{ + INFO("%s, version: " DRIVER_VERSION +#ifdef USE_ISO + " (iso)" +#endif + "%s\n", driver_desc, + use_dma ? " (dma)" : ""); + return driver_register(&udc_driver); +} +module_init(udc_init); + +static void __exit udc_exit(void) +{ + driver_unregister(&udc_driver); +} +module_exit(udc_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h new file mode 100644 index 0000000..c9e6854 --- /dev/null +++ b/drivers/usb/gadget/omap_udc.h @@ -0,0 +1,208 @@ +/* + * omap_udc.h -- for omap 3.2 udc, with OTG support + * + * 2004 (C) Texas Instruments, Inc. + * 2004 (C) David Brownell + */ + +/* + * USB device/endpoint management registers + */ +#define UDC_REG(offset) __REG16(UDC_BASE + (offset)) + +#define UDC_REV_REG UDC_REG(0x0) /* Revision */ +#define UDC_EP_NUM_REG UDC_REG(0x4) /* Which endpoint */ +# define UDC_SETUP_SEL (1 << 6) +# define UDC_EP_SEL (1 << 5) +# define UDC_EP_DIR (1 << 4) + /* low 4 bits for endpoint number */ +#define UDC_DATA_REG UDC_REG(0x08) /* Endpoint FIFO */ +#define UDC_CTRL_REG UDC_REG(0x0C) /* Endpoint control */ +# define UDC_CLR_HALT (1 << 7) +# define UDC_SET_HALT (1 << 6) +# define UDC_SET_FIFO_EN (1 << 2) +# define UDC_CLR_EP (1 << 1) +# define UDC_RESET_EP (1 << 0) +#define UDC_STAT_FLG_REG UDC_REG(0x10) /* Endpoint status */ +# define UDC_NO_RXPACKET (1 << 15) +# define UDC_MISS_IN (1 << 14) +# define UDC_DATA_FLUSH (1 << 13) +# define UDC_ISO_ERR (1 << 12) +# define UDC_ISO_FIFO_EMPTY (1 << 9) +# define UDC_ISO_FIFO_FULL (1 << 8) +# define UDC_EP_HALTED (1 << 6) +# define UDC_STALL (1 << 5) +# define UDC_NAK (1 << 4) +# define UDC_ACK (1 << 3) +# define UDC_FIFO_EN (1 << 2) +# define UDC_NON_ISO_FIFO_EMPTY (1 << 1) +# define UDC_NON_ISO_FIFO_FULL (1 << 0) +#define UDC_RXFSTAT_REG UDC_REG(0x14) /* OUT bytecount */ +#define UDC_SYSCON1_REG UDC_REG(0x18) /* System config 1 */ +# define UDC_CFG_LOCK (1 << 8) +# define UDC_DATA_ENDIAN (1 << 7) +# define UDC_DMA_ENDIAN (1 << 6) +# define UDC_NAK_EN (1 << 4) +# define UDC_AUTODECODE_DIS (1 << 3) +# define UDC_SELF_PWR (1 << 2) +# define UDC_SOFF_DIS (1 << 1) +# define UDC_PULLUP_EN (1 << 0) +#define UDC_SYSCON2_REG UDC_REG(0x1C) /* System config 2 */ +# define UDC_RMT_WKP (1 << 6) +# define UDC_STALL_CMD (1 << 5) +# define UDC_DEV_CFG (1 << 3) +# define UDC_CLR_CFG (1 << 2) +#define UDC_DEVSTAT_REG UDC_REG(0x20) /* Device status */ +# define UDC_B_HNP_ENABLE (1 << 9) +# define UDC_A_HNP_SUPPORT (1 << 8) +# define UDC_A_ALT_HNP_SUPPORT (1 << 7) +# define UDC_R_WK_OK (1 << 6) +# define UDC_USB_RESET (1 << 5) +# define UDC_SUS (1 << 4) +# define UDC_CFG (1 << 3) +# define UDC_ADD (1 << 2) +# define UDC_DEF (1 << 1) +# define UDC_ATT (1 << 0) +#define UDC_SOF_REG UDC_REG(0x24) /* Start of frame */ +# define UDC_FT_LOCK (1 << 12) +# define UDC_TS_OK (1 << 11) +# define UDC_TS 0x03ff +#define UDC_IRQ_EN_REG UDC_REG(0x28) /* Interrupt enable */ +# define UDC_SOF_IE (1 << 7) +# define UDC_EPN_RX_IE (1 << 5) +# define UDC_EPN_TX_IE (1 << 4) +# define UDC_DS_CHG_IE (1 << 3) +# define UDC_EP0_IE (1 << 0) +#define UDC_DMA_IRQ_EN_REG UDC_REG(0x2C) /* DMA irq enable */ + /* rx/tx dma channels numbered 1-3 not 0-2 */ +# define UDC_TX_DONE_IE(n) (1 << (4 * (n) - 2)) +# define UDC_RX_CNT_IE(n) (1 << (4 * (n) - 3)) +# define UDC_RX_EOT_IE(n) (1 << (4 * (n) - 4)) +#define UDC_IRQ_SRC_REG UDC_REG(0x30) /* Interrupt source */ +# define UDC_TXN_DONE (1 << 10) +# define UDC_RXN_CNT (1 << 9) +# define UDC_RXN_EOT (1 << 8) +# define UDC_SOF (1 << 7) +# define UDC_EPN_RX (1 << 5) +# define UDC_EPN_TX (1 << 4) +# define UDC_DS_CHG (1 << 3) +# define UDC_SETUP (1 << 2) +# define UDC_EP0_RX (1 << 1) +# define UDC_EP0_TX (1 << 0) +# define UDC_IRQ_SRC_MASK 0x7bf +#define UDC_EPN_STAT_REG UDC_REG(0x34) /* EP irq status */ +#define UDC_DMAN_STAT_REG UDC_REG(0x38) /* DMA irq status */ +# define UDC_DMA_RX_SB (1 << 12) +# define UDC_DMA_RX_SRC(x) (((x)>>8) & 0xf) +# define UDC_DMA_TX_SRC(x) (((x)>>0) & 0xf) + + +/* DMA configuration registers: up to three channels in each direction. */ +#define UDC_RXDMA_CFG_REG UDC_REG(0x40) /* 3 eps for RX DMA */ +#define UDC_TXDMA_CFG_REG UDC_REG(0x44) /* 3 eps for TX DMA */ +#define UDC_DATA_DMA_REG UDC_REG(0x48) /* rx/tx fifo addr */ + +/* rx/tx dma control, numbering channels 1-3 not 0-2 */ +#define UDC_TXDMA_REG(chan) UDC_REG(0x50 - 4 + 4 * (chan)) +# define UDC_TXN_EOT (1 << 15) /* bytes vs packets */ +# define UDC_TXN_START (1 << 14) /* start transfer */ +# define UDC_TXN_TSC 0x03ff /* units in xfer */ +#define UDC_RXDMA_REG(chan) UDC_REG(0x60 - 4 + 4 * (chan)) +# define UDC_RXN_STOP (1 << 15) /* enable EOT irq */ +# define UDC_RXN_TC 0x00ff /* packets in xfer */ + + +/* + * Endpoint configuration registers (used before CFG_LOCK is set) + * UDC_EP_TX_REG(0) is unused + */ +#define UDC_EP_RX_REG(endpoint) UDC_REG(0x80 + (endpoint)*4) +# define UDC_EPN_RX_VALID (1 << 15) +# define UDC_EPN_RX_DB (1 << 14) + /* buffer size in bits 13, 12 */ +# define UDC_EPN_RX_ISO (1 << 11) + /* buffer pointer in low 11 bits */ +#define UDC_EP_TX_REG(endpoint) UDC_REG(0xc0 + (endpoint)*4) + /* same bitfields as in RX_REG */ + +/*-------------------------------------------------------------------------*/ + +struct omap_req { + struct usb_request req; + struct list_head queue; + unsigned dma_bytes; + unsigned mapped:1; +}; + +struct omap_ep { + struct usb_ep ep; + struct list_head queue; + unsigned long irqs; + struct list_head iso; + const struct usb_endpoint_descriptor *desc; + char name[14]; + u16 maxpacket; + u8 bEndpointAddress; + u8 bmAttributes; + unsigned double_buf:1; + unsigned stopped:1; + unsigned fnf:1; + unsigned has_dma:1; + u8 ackwait; + u8 dma_channel; + u16 dma_counter; + int lch; + struct omap_udc *udc; + struct timer_list timer; +}; + +struct omap_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + spinlock_t lock; + struct omap_ep ep[32]; + u16 devstat; + struct otg_transceiver *transceiver; + struct list_head iso; + unsigned softconnect:1; + unsigned vbus_active:1; + unsigned ep0_pending:1; + unsigned ep0_in:1; + unsigned ep0_set_config:1; + unsigned ep0_reset_config:1; + unsigned ep0_setup:1; + + struct completion *done; +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +#define DBG(stuff...) printk(KERN_DEBUG "udc: " stuff) +#else +#define DBG(stuff...) do{}while(0) +#endif + +#ifdef VERBOSE +# define VDBG DBG +#else +# define VDBG(stuff...) do{}while(0) +#endif + +#define ERR(stuff...) printk(KERN_ERR "udc: " stuff) +#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff) +#define INFO(stuff...) printk(KERN_INFO "udc: " stuff) + +/*-------------------------------------------------------------------------*/ + +#define MOD_CONF_CTRL_0_REG __REG32(MOD_CONF_CTRL_0) +#define VBUS_W2FC_1510 (1 << 17) /* 0 gpio0, 1 dvdd2 pin */ + +#define FUNC_MUX_CTRL_0_REG __REG32(FUNC_MUX_CTRL_0) +#define VBUS_CTRL_1510 (1 << 19) /* 1 connected (software) */ +#define VBUS_MODE_1510 (1 << 18) /* 0 hardware, 1 software */ + +#define HMC_1510 ((MOD_CONF_CTRL_0_REG >> 1) & 0x3f) +#define HMC_1610 (OTG_SYSCON_2_REG & 0x3f) +#define HMC (cpu_is_omap15xx() ? HMC_1510 : HMC_1610) + diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c new file mode 100644 index 0000000..6390c57 --- /dev/null +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -0,0 +1,2648 @@ +/* + * linux/drivers/usb/gadget/pxa2xx_udc.c + * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers + * + * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) + * Copyright (C) 2003 Robert Schwebel, Pengutronix + * Copyright (C) 2003 Benedikt Spranger, Pengutronix + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003 Joshua Wise + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#undef DEBUG +// #define VERBOSE DBG_VERBOSE + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> + +#include <asm/byteorder.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/mach-types.h> +#include <asm/unaligned.h> +#include <asm/hardware.h> +#include <asm/arch/pxa-regs.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +#include <asm/arch/udc.h> + + +/* + * This driver handles the USB Device Controller (UDC) in Intel's PXA 2xx + * series processors. The UDC for the IXP 4xx series is very similar. + * There are fifteen endpoints, in addition to ep0. + * + * Such controller drivers work with a gadget driver. The gadget driver + * returns descriptors, implements configuration and data protocols used + * by the host to interact with this device, and allocates endpoints to + * the different protocol interfaces. The controller driver virtualizes + * usb hardware so that the gadget drivers will be more portable. + * + * This UDC hardware wants to implement a bit too much USB protocol, so + * it constrains the sorts of USB configuration change events that work. + * The errata for these chips are misleading; some "fixed" bugs from + * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. + */ + +#define DRIVER_VERSION "14-Dec-2003" +#define DRIVER_DESC "PXA 2xx USB Device Controller driver" + + +static const char driver_name [] = "pxa2xx_udc"; + +static const char ep0name [] = "ep0"; + + +// #define USE_DMA +// #define USE_OUT_DMA +// #define DISABLE_TEST_MODE + +#ifdef CONFIG_ARCH_IXP4XX +#undef USE_DMA + +/* cpu-specific register addresses are compiled in to this code */ +#ifdef CONFIG_ARCH_PXA +#error "Can't configure both IXP and PXA" +#endif + +#endif + +#include "pxa2xx_udc.h" + + +#ifdef USE_DMA +static int use_dma = 1; +module_param(use_dma, bool, 0); +MODULE_PARM_DESC (use_dma, "true to use dma"); + +static void dma_nodesc_handler (int dmach, void *_ep, struct pt_regs *r); +static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req); + +#ifdef USE_OUT_DMA +#define DMASTR " (dma support)" +#else +#define DMASTR " (dma in)" +#endif + +#else /* !USE_DMA */ +#define DMASTR " (pio only)" +#undef USE_OUT_DMA +#endif + +#ifdef CONFIG_USB_PXA2XX_SMALL +#define SIZE_STR " (small)" +#else +#define SIZE_STR "" +#endif + +#ifdef DISABLE_TEST_MODE +/* (mode == 0) == no undocumented chip tweaks + * (mode & 1) == double buffer bulk IN + * (mode & 2) == double buffer bulk OUT + * ... so mode = 3 (or 7, 15, etc) does it for both + */ +static ushort fifo_mode = 0; +module_param(fifo_mode, ushort, 0); +MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode"); +#endif + +/* --------------------------------------------------------------------------- + * endpoint related parts of the api to the usb controller hardware, + * used by gadget driver; and the inner talker-to-hardware core. + * --------------------------------------------------------------------------- + */ + +static void pxa2xx_ep_fifo_flush (struct usb_ep *ep); +static void nuke (struct pxa2xx_ep *, int status); + +static void pio_irq_enable(int bEndpointAddress) +{ + bEndpointAddress &= 0xf; + if (bEndpointAddress < 8) + UICR0 &= ~(1 << bEndpointAddress); + else { + bEndpointAddress -= 8; + UICR1 &= ~(1 << bEndpointAddress); + } +} + +static void pio_irq_disable(int bEndpointAddress) +{ + bEndpointAddress &= 0xf; + if (bEndpointAddress < 8) + UICR0 |= 1 << bEndpointAddress; + else { + bEndpointAddress -= 8; + UICR1 |= 1 << bEndpointAddress; + } +} + +/* The UDCCR reg contains mask and interrupt status bits, + * so using '|=' isn't safe as it may ack an interrupt. + */ +#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE) + +static inline void udc_set_mask_UDCCR(int mask) +{ + UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS); +} + +static inline void udc_clear_mask_UDCCR(int mask) +{ + UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS); +} + +static inline void udc_ack_int_UDCCR(int mask) +{ + /* udccr contains the bits we dont want to change */ + __u32 udccr = UDCCR & UDCCR_MASK_BITS; + + UDCCR = udccr | (mask & ~UDCCR_MASK_BITS); +} + +/* + * endpoint enable/disable + * + * we need to verify the descriptors used to enable endpoints. since pxa2xx + * endpoint configurations are fixed, and are pretty much always enabled, + * there's not a lot to manage here. + * + * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints, + * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except + * for a single interface (with only the default altsetting) and for gadget + * drivers that don't halt endpoints (not reset by set_interface). that also + * means that if you use ISO, you must violate the USB spec rule that all + * iso endpoints must be in non-default altsettings. + */ +static int pxa2xx_ep_enable (struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct pxa2xx_ep *ep; + struct pxa2xx_udc *dev; + + ep = container_of (_ep, struct pxa2xx_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep->fifo_size < le16_to_cpu + (desc->wMaxPacketSize)) { + DMSG("%s, bad ep or descriptor\n", __FUNCTION__); + return -EINVAL; + } + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + return -EINVAL; + } + + /* hardware _could_ do smaller, but driver doesn't */ + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && le16_to_cpu (desc->wMaxPacketSize) + != BULK_FIFO_SIZE) + || !desc->wMaxPacketSize) { + DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); + return -ERANGE; + } + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + DMSG("%s, bogus device state\n", __FUNCTION__); + return -ESHUTDOWN; + } + + ep->desc = desc; + ep->dma = -1; + ep->stopped = 0; + ep->pio_irqs = ep->dma_irqs = 0; + ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); + + /* flush fifo (mostly for OUT buffers) */ + pxa2xx_ep_fifo_flush (_ep); + + /* ... reset halt state too, if we could ... */ + +#ifdef USE_DMA + /* for (some) bulk and ISO endpoints, try to get a DMA channel and + * bind it to the endpoint. otherwise use PIO. + */ + switch (ep->bmAttributes) { + case USB_ENDPOINT_XFER_ISOC: + if (le16_to_cpu(desc->wMaxPacketSize) % 32) + break; + // fall through + case USB_ENDPOINT_XFER_BULK: + if (!use_dma || !ep->reg_drcmr) + break; + ep->dma = pxa_request_dma ((char *)_ep->name, + (le16_to_cpu (desc->wMaxPacketSize) > 64) + ? DMA_PRIO_MEDIUM /* some iso */ + : DMA_PRIO_LOW, + dma_nodesc_handler, ep); + if (ep->dma >= 0) { + *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma; + DMSG("%s using dma%d\n", _ep->name, ep->dma); + } + } +#endif + + DBG(DBG_VERBOSE, "enabled %s\n", _ep->name); + return 0; +} + +static int pxa2xx_ep_disable (struct usb_ep *_ep) +{ + struct pxa2xx_ep *ep; + + ep = container_of (_ep, struct pxa2xx_ep, ep); + if (!_ep || !ep->desc) { + DMSG("%s, %s not enabled\n", __FUNCTION__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + nuke (ep, -ESHUTDOWN); + +#ifdef USE_DMA + if (ep->dma >= 0) { + *ep->reg_drcmr = 0; + pxa_free_dma (ep->dma); + ep->dma = -1; + } +#endif + + /* flush fifo (mostly for IN buffers) */ + pxa2xx_ep_fifo_flush (_ep); + + ep->desc = NULL; + ep->stopped = 1; + + DBG(DBG_VERBOSE, "%s disabled\n", _ep->name); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* for the pxa2xx, these can just wrap kmalloc/kfree. gadget drivers + * must still pass correctly initialized endpoints, since other controller + * drivers may care about how it's currently set up (dma issues etc). + */ + +/* + * pxa2xx_ep_alloc_request - allocate a request data structure + */ +static struct usb_request * +pxa2xx_ep_alloc_request (struct usb_ep *_ep, int gfp_flags) +{ + struct pxa2xx_request *req; + + req = kmalloc (sizeof *req, gfp_flags); + if (!req) + return NULL; + + memset (req, 0, sizeof *req); + INIT_LIST_HEAD (&req->queue); + return &req->req; +} + + +/* + * pxa2xx_ep_free_request - deallocate a request data structure + */ +static void +pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa2xx_request *req; + + req = container_of (_req, struct pxa2xx_request, req); + WARN_ON (!list_empty (&req->queue)); + kfree(req); +} + + +/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's + * no device-affinity and the heap works perfectly well for i/o buffers. + * It wastes much less memory than dma_alloc_coherent() would, and even + * prevents cacheline (32 bytes wide) sharing problems. + */ +static void * +pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, + dma_addr_t *dma, int gfp_flags) +{ + char *retval; + + retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM)); + if (retval) +#ifdef USE_DMA + *dma = virt_to_bus (retval); +#else + *dma = (dma_addr_t)~0; +#endif + return retval; +} + +static void +pxa2xx_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, + unsigned bytes) +{ + kfree (buf); +} + +/*-------------------------------------------------------------------------*/ + +/* + * done - retire a request; caller blocked irqs + */ +static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status) +{ + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (likely (req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + req->req.complete(&ep->ep, &req->req); + ep->stopped = stopped; +} + + +static inline void ep0_idle (struct pxa2xx_udc *dev) +{ + dev->ep0state = EP0_IDLE; +} + +static int +write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max) +{ + u8 *buf; + unsigned length, count; + + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* how big will this packet be? */ + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + count = length; + while (likely(count--)) + *uddr = *buf++; + + return length; +} + +/* + * write to an IN endpoint fifo, as many packets as possible. + * irqs will use this to write the rest later. + * caller guarantees at least one packet buffer is ready (or a zlp). + */ +static int +write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + unsigned max; + + max = le16_to_cpu(ep->desc->wMaxPacketSize); + do { + unsigned count; + int is_last, is_short; + + count = write_packet(ep->reg_uddr, req, max); + + /* last packet is usually short (or a zlp) */ + if (unlikely (count != max)) + is_last = is_short = 1; + else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely (max < ep->fifo_size); + } + + DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n", + ep->ep.name, count, + is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, req); + + /* let loose that packet. maybe try writing another one, + * double buffering might work. TSP, TPC, and TFS + * bit values are the same for all normal IN endpoints. + */ + *ep->reg_udccs = UDCCS_BI_TPC; + if (is_short) + *ep->reg_udccs = UDCCS_BI_TSP; + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done (ep, req, 0); + if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) { + pio_irq_disable (ep->bEndpointAddress); +#ifdef USE_DMA + /* unaligned data and zlps couldn't use dma */ + if (unlikely(!list_empty(&ep->queue))) { + req = list_entry(ep->queue.next, + struct pxa2xx_request, queue); + kick_dma(ep,req); + return 0; + } +#endif + } + return 1; + } + + // TODO experiment: how robust can fifo mode tweaking be? + // double buffering is off in the default fifo mode, which + // prevents TFS from being set here. + + } while (*ep->reg_udccs & UDCCS_BI_TFS); + return 0; +} + +/* caller asserts req->pending (ep0 irq status nyet cleared); starts + * ep0 data stage. these chips want very simple state transitions. + */ +static inline +void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag) +{ + UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR; + USIR0 = USIR0_IR0; + dev->req_pending = 0; + DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", + __FUNCTION__, tag, UDCCS0, flags); +} + +static int +write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + unsigned count; + int is_short; + + count = write_packet(&UDDR0, req, EP0_FIFO_SIZE); + ep->dev->stats.write.bytes += count; + + /* last packet "must be" short (or a zlp) */ + is_short = (count != EP0_FIFO_SIZE); + + DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count, + req->req.length - req->req.actual, req); + + if (unlikely (is_short)) { + if (ep->dev->req_pending) + ep0start(ep->dev, UDCCS0_IPR, "short IN"); + else + UDCCS0 = UDCCS0_IPR; + + count = req->req.length; + done (ep, req, 0); + ep0_idle(ep->dev); +#if 1 + /* This seems to get rid of lost status irqs in some cases: + * host responds quickly, or next request involves config + * change automagic, or should have been hidden, or ... + * + * FIXME get rid of all udelays possible... + */ + if (count >= EP0_FIFO_SIZE) { + count = 100; + do { + if ((UDCCS0 & UDCCS0_OPR) != 0) { + /* clear OPR, generate ack */ + UDCCS0 = UDCCS0_OPR; + break; + } + count--; + udelay(1); + } while (count); + } +#endif + } else if (ep->dev->req_pending) + ep0start(ep->dev, 0, "IN"); + return is_short; +} + + +/* + * read_fifo - unload packet(s) from the fifo we use for usb OUT + * transfers and put them into the request. caller should have made + * sure there's at least one packet ready. + * + * returns true if the request completed because of short packet or the + * request buffer having filled (and maybe overran till end-of-packet). + */ +static int +read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + for (;;) { + u32 udccs; + u8 *buf; + unsigned bufferspace, count, is_short; + + /* make sure there's a packet in the FIFO. + * UDCCS_{BO,IO}_RPC are all the same bit value. + * UDCCS_{BO,IO}_RNE are all the same bit value. + */ + udccs = *ep->reg_udccs; + if (unlikely ((udccs & UDCCS_BO_RPC) == 0)) + break; + buf = req->req.buf + req->req.actual; + prefetchw(buf); + bufferspace = req->req.length - req->req.actual; + + /* read all bytes from this packet */ + if (likely (udccs & UDCCS_BO_RNE)) { + count = 1 + (0x0ff & *ep->reg_ubcr); + req->req.actual += min (count, bufferspace); + } else /* zlp */ + count = 0; + is_short = (count < ep->ep.maxpacket); + DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, udccs, count, + is_short ? "/S" : "", + req, req->req.actual, req->req.length); + while (likely (count-- != 0)) { + u8 byte = (u8) *ep->reg_uddr; + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow %d\n", + ep->ep.name, count); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + *ep->reg_udccs = UDCCS_BO_RPC; + /* RPC/RSP/RNE could now reflect the other packet buffer */ + + /* iso is one request per packet */ + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (udccs & UDCCS_IO_ROF) + req->req.status = -EHOSTUNREACH; + /* more like "is_done" */ + is_short = 1; + } + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done (ep, req, 0); + if (list_empty(&ep->queue)) + pio_irq_disable (ep->bEndpointAddress); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + } + return 0; +} + +/* + * special ep0 version of the above. no UBCR0 or double buffering; status + * handshaking is magic. most device protocols don't need control-OUT. + * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other + * protocols do use them. + */ +static int +read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + u8 *buf, byte; + unsigned bufferspace; + + buf = req->req.buf + req->req.actual; + bufferspace = req->req.length - req->req.actual; + + while (UDCCS0 & UDCCS0_RNE) { + byte = (u8) UDDR0; + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow\n", ep->ep.name); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + req->req.actual++; + bufferspace--; + } + } + + UDCCS0 = UDCCS0_OPR | UDCCS0_IPR; + + /* completion */ + if (req->req.actual >= req->req.length) + return 1; + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +#ifdef USE_DMA + +#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE) + +static void +start_dma_nodesc(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int is_in) +{ + u32 dcmd = req->req.length; + u32 buf = req->req.dma; + u32 fifo = io_v2p ((u32)ep->reg_uddr); + + /* caller guarantees there's a packet or more remaining + * - IN may end with a short packet (TSP set separately), + * - OUT is always full length + */ + buf += req->req.actual; + dcmd -= req->req.actual; + ep->dma_fixup = 0; + + /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */ + DCSR(ep->dma) = DCSR_NODESC; + if (is_in) { + DSADR(ep->dma) = buf; + DTADR(ep->dma) = fifo; + if (dcmd > MAX_IN_DMA) + dcmd = MAX_IN_DMA; + else + ep->dma_fixup = (dcmd % ep->ep.maxpacket) != 0; + dcmd |= DCMD_BURST32 | DCMD_WIDTH1 + | DCMD_FLOWTRG | DCMD_INCSRCADDR; + } else { +#ifdef USE_OUT_DMA + DSADR(ep->dma) = fifo; + DTADR(ep->dma) = buf; + if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC) + dcmd = ep->ep.maxpacket; + dcmd |= DCMD_BURST32 | DCMD_WIDTH1 + | DCMD_FLOWSRC | DCMD_INCTRGADDR; +#endif + } + DCMD(ep->dma) = dcmd; + DCSR(ep->dma) = DCSR_RUN | DCSR_NODESC + | (unlikely(is_in) + ? DCSR_STOPIRQEN /* use dma_nodesc_handler() */ + : 0); /* use handle_ep() */ +} + +static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + int is_in = ep->bEndpointAddress & USB_DIR_IN; + + if (is_in) { + /* unaligned tx buffers and zlps only work with PIO */ + if ((req->req.dma & 0x0f) != 0 + || unlikely((req->req.length - req->req.actual) + == 0)) { + pio_irq_enable(ep->bEndpointAddress); + if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0) + (void) write_fifo(ep, req); + } else { + start_dma_nodesc(ep, req, USB_DIR_IN); + } + } else { + if ((req->req.length - req->req.actual) < ep->ep.maxpacket) { + DMSG("%s short dma read...\n", ep->ep.name); + /* we're always set up for pio out */ + read_fifo (ep, req); + } else { + *ep->reg_udccs = UDCCS_BO_DME + | (*ep->reg_udccs & UDCCS_BO_FST); + start_dma_nodesc(ep, req, USB_DIR_OUT); + } + } +} + +static void cancel_dma(struct pxa2xx_ep *ep) +{ + struct pxa2xx_request *req; + u32 tmp; + + if (DCSR(ep->dma) == 0 || list_empty(&ep->queue)) + return; + + DCSR(ep->dma) = 0; + while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0) + cpu_relax(); + + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + tmp = DCMD(ep->dma) & DCMD_LENGTH; + req->req.actual = req->req.length - (tmp & DCMD_LENGTH); + + /* the last tx packet may be incomplete, so flush the fifo. + * FIXME correct req.actual if we can + */ + if (ep->bEndpointAddress & USB_DIR_IN) + *ep->reg_udccs = UDCCS_BI_FTF; +} + +/* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */ +static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r) +{ + struct pxa2xx_ep *ep = _ep; + struct pxa2xx_request *req; + u32 tmp, completed; + + local_irq_disable(); + + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + + ep->dma_irqs++; + ep->dev->stats.irqs++; + HEX_DISPLAY(ep->dev->stats.irqs); + + /* ack/clear */ + tmp = DCSR(ep->dma); + DCSR(ep->dma) = tmp; + if ((tmp & DCSR_STOPSTATE) == 0 + || (DDADR(ep->dma) & DDADR_STOP) != 0) { + DBG(DBG_VERBOSE, "%s, dcsr %08x ddadr %08x\n", + ep->ep.name, DCSR(ep->dma), DDADR(ep->dma)); + goto done; + } + DCSR(ep->dma) = 0; /* clear DCSR_STOPSTATE */ + + /* update transfer status */ + completed = tmp & DCSR_BUSERR; + if (ep->bEndpointAddress & USB_DIR_IN) + tmp = DSADR(ep->dma); + else + tmp = DTADR(ep->dma); + req->req.actual = tmp - req->req.dma; + + /* FIXME seems we sometimes see partial transfers... */ + + if (unlikely(completed != 0)) + req->req.status = -EIO; + else if (req->req.actual) { + /* these registers have zeroes in low bits; they miscount + * some (end-of-transfer) short packets: tx 14 as tx 12 + */ + if (ep->dma_fixup) + req->req.actual = min(req->req.actual + 3, + req->req.length); + + tmp = (req->req.length - req->req.actual); + completed = (tmp == 0); + if (completed && (ep->bEndpointAddress & USB_DIR_IN)) { + + /* maybe validate final short packet ... */ + if ((req->req.actual % ep->ep.maxpacket) != 0) + *ep->reg_udccs = UDCCS_BI_TSP/*|UDCCS_BI_TPC*/; + + /* ... or zlp, using pio fallback */ + else if (ep->bmAttributes == USB_ENDPOINT_XFER_BULK + && req->req.zero) { + DMSG("%s zlp terminate ...\n", ep->ep.name); + completed = 0; + } + } + } + + if (likely(completed)) { + done(ep, req, 0); + + /* maybe re-activate after completion */ + if (ep->stopped || list_empty(&ep->queue)) + goto done; + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + } + kick_dma(ep, req); +done: + local_irq_enable(); +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static int +pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +{ + struct pxa2xx_request *req; + struct pxa2xx_ep *ep; + struct pxa2xx_udc *dev; + unsigned long flags; + + req = container_of(_req, struct pxa2xx_request, req); + if (unlikely (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue))) { + DMSG("%s, bad params\n", __FUNCTION__); + return -EINVAL; + } + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + DMSG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + + dev = ep->dev; + if (unlikely (!dev->driver + || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + DMSG("%s, bogus device state\n", __FUNCTION__); + return -ESHUTDOWN; + } + + /* iso is always one packet per request, that's the only way + * we can report per-packet status. that also helps with dma. + */ + if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + && req->req.length > le16_to_cpu + (ep->desc->wMaxPacketSize))) + return -EMSGSIZE; + +#ifdef USE_DMA + // FIXME caller may already have done the dma mapping + if (ep->dma >= 0) { + _req->dma = dma_map_single(dev->dev, + _req->buf, _req->length, + ((ep->bEndpointAddress & USB_DIR_IN) != 0) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + } +#endif + + DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); + + local_irq_save(flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped) { + if (ep->desc == 0 /* ep0 */) { + unsigned length = _req->length; + + switch (dev->ep0state) { + case EP0_IN_DATA_PHASE: + dev->stats.write.ops++; + if (write_ep0_fifo(ep, req)) + req = NULL; + break; + + case EP0_OUT_DATA_PHASE: + dev->stats.read.ops++; + /* messy ... */ + if (dev->req_config) { + DBG(DBG_VERBOSE, "ep0 config ack%s\n", + dev->has_cfr ? "" : " raced"); + if (dev->has_cfr) + UDCCFR = UDCCFR_AREN|UDCCFR_ACM + |UDCCFR_MB1; + done(ep, req, 0); + dev->ep0state = EP0_END_XFER; + local_irq_restore (flags); + return 0; + } + if (dev->req_pending) + ep0start(dev, UDCCS0_IPR, "OUT"); + if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0 + && read_ep0_fifo(ep, req))) { + ep0_idle(dev); + done(ep, req, 0); + req = NULL; + } + break; + + default: + DMSG("ep0 i/o, odd state %d\n", dev->ep0state); + local_irq_restore (flags); + return -EL2HLT; + } +#ifdef USE_DMA + /* either start dma or prime pio pump */ + } else if (ep->dma >= 0) { + kick_dma(ep, req); +#endif + /* can the FIFO can satisfy the request immediately? */ + } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0 + && (*ep->reg_udccs & UDCCS_BI_TFS) != 0 + && write_fifo(ep, req)) { + req = NULL; + } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0 + && read_fifo(ep, req)) { + req = NULL; + } + + if (likely (req && ep->desc) && ep->dma < 0) + pio_irq_enable(ep->bEndpointAddress); + } + + /* pio or dma irq handler advances the queue. */ + if (likely (req != 0)) + list_add_tail(&req->queue, &ep->queue); + local_irq_restore(flags); + + return 0; +} + + +/* + * nuke - dequeue ALL requests + */ +static void nuke(struct pxa2xx_ep *ep, int status) +{ + struct pxa2xx_request *req; + + /* called with irqs blocked */ +#ifdef USE_DMA + if (ep->dma >= 0 && !ep->stopped) + cancel_dma(ep); +#endif + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct pxa2xx_request, + queue); + done(ep, req, status); + } + if (ep->desc) + pio_irq_disable (ep->bEndpointAddress); +} + + +/* dequeue JUST ONE request */ +static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa2xx_ep *ep; + struct pxa2xx_request *req; + unsigned long flags; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (!_ep || ep->ep.name == ep0name) + return -EINVAL; + + local_irq_save(flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + local_irq_restore(flags); + return -EINVAL; + } + +#ifdef USE_DMA + if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) { + cancel_dma(ep); + done(ep, req, -ECONNRESET); + /* restart i/o */ + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct pxa2xx_request, queue); + kick_dma(ep, req); + } + } else +#endif + done(ep, req, -ECONNRESET); + + local_irq_restore(flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct pxa2xx_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (unlikely (!_ep + || (!ep->desc && ep->ep.name != ep0name)) + || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DMSG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + if (value == 0) { + /* this path (reset toggle+halt) is needed to implement + * SET_INTERFACE on normal hardware. but it can't be + * done from software on the PXA UDC, and the hardware + * forgets to do it as part of SET_INTERFACE automagic. + */ + DMSG("only host can clear %s halt\n", _ep->name); + return -EROFS; + } + + local_irq_save(flags); + + if ((ep->bEndpointAddress & USB_DIR_IN) != 0 + && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0 + || !list_empty(&ep->queue))) { + local_irq_restore(flags); + return -EAGAIN; + } + + /* FST bit is the same for control, bulk in, bulk out, interrupt in */ + *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF; + + /* ep0 needs special care */ + if (!ep->desc) { + start_watchdog(ep->dev); + ep->dev->req_pending = 0; + ep->dev->ep0state = EP0_STALL; + + /* and bulk/intr endpoints like dropping stalls too */ + } else { + unsigned i; + for (i = 0; i < 1000; i += 20) { + if (*ep->reg_udccs & UDCCS_BI_SST) + break; + udelay(20); + } + } + local_irq_restore(flags); + + DBG(DBG_VERBOSE, "%s halt\n", _ep->name); + return 0; +} + +static int pxa2xx_ep_fifo_status(struct usb_ep *_ep) +{ + struct pxa2xx_ep *ep; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (!_ep) { + DMSG("%s, bad ep\n", __FUNCTION__); + return -ENODEV; + } + /* pxa can't report unclaimed bytes from IN fifos */ + if ((ep->bEndpointAddress & USB_DIR_IN) != 0) + return -EOPNOTSUPP; + if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN + || (*ep->reg_udccs & UDCCS_BO_RFS) == 0) + return 0; + else + return (*ep->reg_ubcr & 0xfff) + 1; +} + +static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep) +{ + struct pxa2xx_ep *ep; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { + DMSG("%s, bad ep\n", __FUNCTION__); + return; + } + + /* toggle and halt bits stay unchanged */ + + /* for OUT, just read and discard the FIFO contents. */ + if ((ep->bEndpointAddress & USB_DIR_IN) == 0) { + while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0) + (void) *ep->reg_uddr; + return; + } + + /* most IN status is the same, but ISO can't stall */ + *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + ? 0 : UDCCS_BI_SST; +} + + +static struct usb_ep_ops pxa2xx_ep_ops = { + .enable = pxa2xx_ep_enable, + .disable = pxa2xx_ep_disable, + + .alloc_request = pxa2xx_ep_alloc_request, + .free_request = pxa2xx_ep_free_request, + + .alloc_buffer = pxa2xx_ep_alloc_buffer, + .free_buffer = pxa2xx_ep_free_buffer, + + .queue = pxa2xx_ep_queue, + .dequeue = pxa2xx_ep_dequeue, + + .set_halt = pxa2xx_ep_set_halt, + .fifo_status = pxa2xx_ep_fifo_status, + .fifo_flush = pxa2xx_ep_fifo_flush, +}; + + +/* --------------------------------------------------------------------------- + * device-scoped parts of the api to the usb controller hardware + * --------------------------------------------------------------------------- + */ + +static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget) +{ + return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff); +} + +static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget) +{ + /* host may not have enabled remote wakeup */ + if ((UDCCS0 & UDCCS0_DRWF) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(UDCCR_RSM); + return 0; +} + +static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *); +static void udc_enable (struct pxa2xx_udc *); +static void udc_disable(struct pxa2xx_udc *); + +/* We disable the UDC -- and its 48 MHz clock -- whenever it's not + * in active use. + */ +static int pullup(struct pxa2xx_udc *udc, int is_active) +{ + is_active = is_active && udc->vbus && udc->pullup; + DMSG("%s\n", is_active ? "active" : "inactive"); + if (is_active) + udc_enable(udc); + else { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + DMSG("disconnect %s\n", udc->driver + ? udc->driver->driver.name + : "(no driver)"); + stop_activity(udc, udc->driver); + } + udc_disable(udc); + } + return 0; +} + +/* VBUS reporting logically comes from a transceiver */ +static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ + struct pxa2xx_udc *udc; + + udc = container_of(_gadget, struct pxa2xx_udc, gadget); + udc->vbus = is_active = (is_active != 0); + DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); + pullup(udc, is_active); + return 0; +} + +/* drivers may have software control over D+ pullup */ +static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + struct pxa2xx_udc *udc; + + udc = container_of(_gadget, struct pxa2xx_udc, gadget); + + /* not all boards support pullup control */ + if (!udc->mach->udc_command) + return -EOPNOTSUPP; + + is_active = (is_active != 0); + udc->pullup = is_active; + pullup(udc, is_active); + return 0; +} + +static const struct usb_gadget_ops pxa2xx_udc_ops = { + .get_frame = pxa2xx_udc_get_frame, + .wakeup = pxa2xx_udc_wakeup, + .vbus_session = pxa2xx_udc_vbus_session, + .pullup = pxa2xx_udc_pullup, + + // .vbus_draw ... boards may consume current from VBUS, up to + // 100-500mA based on config. the 500uA suspend ceiling means + // that exclusively vbus-powered PXA designs violate USB specs. +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static const char proc_node_name [] = "driver/udc"; + +static int +udc_proc_read(char *page, char **start, off_t off, int count, + int *eof, void *_dev) +{ + char *buf = page; + struct pxa2xx_udc *dev = _dev; + char *next = buf; + unsigned size = count; + unsigned long flags; + int i, t; + u32 tmp; + + if (off != 0) + return 0; + + local_irq_save(flags); + + /* basic device status */ + t = scnprintf(next, size, DRIVER_DESC "\n" + "%s version: %s\nGadget driver: %s\nHost %s\n\n", + driver_name, DRIVER_VERSION SIZE_STR DMASTR, + dev->driver ? dev->driver->driver.name : "(none)", + is_usb_connected() ? "full speed" : "disconnected"); + size -= t; + next += t; + + /* registers for device and ep0 */ + t = scnprintf(next, size, + "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); + size -= t; + next += t; + + tmp = UDCCR; + t = scnprintf(next, size, + "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCR_REM) ? " rem" : "", + (tmp & UDCCR_RSTIR) ? " rstir" : "", + (tmp & UDCCR_SRM) ? " srm" : "", + (tmp & UDCCR_SUSIR) ? " susir" : "", + (tmp & UDCCR_RESIR) ? " resir" : "", + (tmp & UDCCR_RSM) ? " rsm" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : ""); + size -= t; + next += t; + + tmp = UDCCS0; + t = scnprintf(next, size, + "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCS0_SA) ? " sa" : "", + (tmp & UDCCS0_RNE) ? " rne" : "", + (tmp & UDCCS0_FST) ? " fst" : "", + (tmp & UDCCS0_SST) ? " sst" : "", + (tmp & UDCCS0_DRWF) ? " dwrf" : "", + (tmp & UDCCS0_FTF) ? " ftf" : "", + (tmp & UDCCS0_IPR) ? " ipr" : "", + (tmp & UDCCS0_OPR) ? " opr" : ""); + size -= t; + next += t; + + if (dev->has_cfr) { + tmp = UDCCFR; + t = scnprintf(next, size, + "udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); + size -= t; + next += t; + } + + if (!is_usb_connected() || !dev->driver) + goto done; + + t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops, + dev->stats.irqs); + size -= t; + next += t; + + /* dump endpoint queues */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa2xx_ep *ep = &dev->ep [i]; + struct pxa2xx_request *req; + int t; + + if (i != 0) { + const struct usb_endpoint_descriptor *d; + + d = ep->desc; + if (!d) + continue; + tmp = *dev->ep [i].reg_udccs; + t = scnprintf(next, size, + "%s max %d %s udccs %02x irqs %lu/%lu\n", + ep->ep.name, le16_to_cpu (d->wMaxPacketSize), + (ep->dma >= 0) ? "dma" : "pio", tmp, + ep->pio_irqs, ep->dma_irqs); + /* TODO translate all five groups of udccs bits! */ + + } else /* ep0 should only have one transfer queued */ + t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n", + ep->pio_irqs); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (list_empty(&ep->queue)) { + t = scnprintf(next, size, "\t(nothing queued)\n"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + continue; + } + list_for_each_entry(req, &ep->queue, queue) { +#ifdef USE_DMA + if (ep->dma >= 0 && req->queue.prev == &ep->queue) + t = scnprintf(next, size, + "\treq %p len %d/%d " + "buf %p (dma%d dcmd %08x)\n", + &req->req, req->req.actual, + req->req.length, req->req.buf, + ep->dma, DCMD(ep->dma) + // low 13 bits == bytes-to-go + ); + else +#endif + t = scnprintf(next, size, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + } + } + +done: + local_irq_restore(flags); + *eof = 1; + return count - size; +} + +#define create_proc_files() \ + create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev) +#define remove_proc_files() \ + remove_proc_entry(proc_node_name, NULL) + +#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +#define create_proc_files() do {} while (0) +#define remove_proc_files() do {} while (0) + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/* "function" sysfs attribute */ +static ssize_t +show_function (struct device *_dev, char *buf) +{ + struct pxa2xx_udc *dev = dev_get_drvdata (_dev); + + if (!dev->driver + || !dev->driver->function + || strlen (dev->driver->function) > PAGE_SIZE) + return 0; + return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); +} +static DEVICE_ATTR (function, S_IRUGO, show_function, NULL); + +/*-------------------------------------------------------------------------*/ + +/* + * udc_disable - disable USB device controller + */ +static void udc_disable(struct pxa2xx_udc *dev) +{ + /* block all irqs */ + udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM); + UICR0 = UICR1 = 0xff; + UFNRH = UFNRH_SIM; + + /* if hardware supports it, disconnect from usb */ + make_usb_disappear(); + + udc_clear_mask_UDCCR(UDCCR_UDE); + +#ifdef CONFIG_ARCH_PXA + /* Disable clock for USB device */ + pxa_set_cken(CKEN11_USB, 0); +#endif + + ep0_idle (dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + LED_CONNECTED_OFF; +} + + +/* + * udc_reinit - initialize software state + */ +static void udc_reinit(struct pxa2xx_udc *dev) +{ + u32 i; + + /* device/ep0 records init */ + INIT_LIST_HEAD (&dev->gadget.ep_list); + INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + dev->ep0state = EP0_IDLE; + + /* basic endpoint records init */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa2xx_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->desc = NULL; + ep->stopped = 0; + INIT_LIST_HEAD (&ep->queue); + ep->pio_irqs = ep->dma_irqs = 0; + } + + /* the rest was statically initialized, and is read-only */ +} + +/* until it's enabled, this UDC should be completely invisible + * to any USB host. + */ +static void udc_enable (struct pxa2xx_udc *dev) +{ + udc_clear_mask_UDCCR(UDCCR_UDE); + +#ifdef CONFIG_ARCH_PXA + /* Enable clock for USB device */ + pxa_set_cken(CKEN11_USB, 1); + udelay(5); +#endif + + /* try to clear these bits before we enable the udc */ + udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); + + ep0_idle(dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->stats.irqs = 0; + + /* + * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual: + * - enable UDC + * - if RESET is already in progress, ack interrupt + * - unmask reset interrupt + */ + udc_set_mask_UDCCR(UDCCR_UDE); + if (!(UDCCR & UDCCR_UDA)) + udc_ack_int_UDCCR(UDCCR_RSTIR); + + if (dev->has_cfr /* UDC_RES2 is defined */) { + /* pxa255 (a0+) can avoid a set_config race that could + * prevent gadget drivers from configuring correctly + */ + UDCCFR = UDCCFR_ACM | UDCCFR_MB1; + } else { + /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1) + * which could result in missing packets and interrupts. + * supposedly one bit per endpoint, controlling whether it + * double buffers or not; ACM/AREN bits fit into the holes. + * zero bits (like USIR0_IRx) disable double buffering. + */ + UDC_RES1 = 0x00; + UDC_RES2 = 0x00; + } + +#ifdef DISABLE_TEST_MODE + /* "test mode" seems to have become the default in later chip + * revs, preventing double buffering (and invalidating docs). + * this EXPERIMENT enables it for bulk endpoints by tweaking + * undefined/reserved register bits (that other drivers clear). + * Belcarra code comments noted this usage. + */ + if (fifo_mode & 1) { /* IN endpoints */ + UDC_RES1 |= USIR0_IR1|USIR0_IR6; + UDC_RES2 |= USIR1_IR11; + } + if (fifo_mode & 2) { /* OUT endpoints */ + UDC_RES1 |= USIR0_IR2|USIR0_IR7; + UDC_RES2 |= USIR1_IR12; + } +#endif + + /* enable suspend/resume and reset irqs */ + udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM); + + /* enable ep0 irqs */ + UICR0 &= ~UICR0_IM0; + + /* if hardware supports it, pullup D+ and wait for reset */ + let_usb_appear(); +} + + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct pxa2xx_udc *dev = the_controller; + int retval; + + if (!driver + || driver->speed != USB_SPEED_FULL + || !driver->bind + || !driver->unbind + || !driver->disconnect + || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + /* first hook up the driver ... */ + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + dev->pullup = 1; + + device_add (&dev->gadget.dev); + retval = driver->bind(&dev->gadget); + if (retval) { + DMSG("bind to driver %s --> error %d\n", + driver->driver.name, retval); + device_del (&dev->gadget.dev); + + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + return retval; + } + device_create_file(dev->dev, &dev_attr_function); + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + DMSG("registered gadget driver '%s'\n", driver->driver.name); + pullup(dev, 1); + dump_state(dev); + return 0; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +static void +stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa2xx_ep *ep = &dev->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + del_timer_sync(&dev->timer); + + /* report disconnect; the driver is already quiesced */ + LED_CONNECTED_OFF; + if (driver) + driver->disconnect(&dev->gadget); + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct pxa2xx_udc *dev = the_controller; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + + local_irq_disable(); + pullup(dev, 0); + stop_activity(dev, driver); + local_irq_enable(); + + driver->unbind(&dev->gadget); + dev->driver = NULL; + + device_del (&dev->gadget.dev); + device_remove_file(dev->dev, &dev_attr_function); + + DMSG("unregistered gadget driver '%s'\n", driver->driver.name); + dump_state(dev); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_LUBBOCK + +/* Lubbock has separate connect and disconnect irqs. More typical designs + * use one GPIO as the VBUS IRQ, and another to control the D+ pullup. + */ + +static irqreturn_t +lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r) +{ + struct pxa2xx_udc *dev = _dev; + int vbus; + + dev->stats.irqs++; + HEX_DISPLAY(dev->stats.irqs); + switch (irq) { + case LUBBOCK_USB_IRQ: + LED_CONNECTED_ON; + vbus = 1; + disable_irq(LUBBOCK_USB_IRQ); + enable_irq(LUBBOCK_USB_DISC_IRQ); + break; + case LUBBOCK_USB_DISC_IRQ: + LED_CONNECTED_OFF; + vbus = 0; + disable_irq(LUBBOCK_USB_DISC_IRQ); + enable_irq(LUBBOCK_USB_IRQ); + break; + default: + return IRQ_NONE; + } + + pxa2xx_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + +#endif + + +/*-------------------------------------------------------------------------*/ + +static inline void clear_ep_state (struct pxa2xx_udc *dev) +{ + unsigned i; + + /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint + * fifos, and pending transactions mustn't be continued in any case. + */ + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) + nuke(&dev->ep[i], -ECONNABORTED); +} + +static void udc_watchdog(unsigned long _dev) +{ + struct pxa2xx_udc *dev = (void *)_dev; + + local_irq_disable(); + if (dev->ep0state == EP0_STALL + && (UDCCS0 & UDCCS0_FST) == 0 + && (UDCCS0 & UDCCS0_SST) == 0) { + UDCCS0 = UDCCS0_FST|UDCCS0_FTF; + DBG(DBG_VERBOSE, "ep0 re-stall\n"); + start_watchdog(dev); + } + local_irq_enable(); +} + +static void handle_ep0 (struct pxa2xx_udc *dev) +{ + u32 udccs0 = UDCCS0; + struct pxa2xx_ep *ep = &dev->ep [0]; + struct pxa2xx_request *req; + union { + struct usb_ctrlrequest r; + u8 raw [8]; + u32 word [2]; + } u; + + if (list_empty(&ep->queue)) + req = NULL; + else + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + + /* clear stall status */ + if (udccs0 & UDCCS0_SST) { + nuke(ep, -EPIPE); + UDCCS0 = UDCCS0_SST; + del_timer(&dev->timer); + ep0_idle(dev); + } + + /* previous request unfinished? non-error iff back-to-back ... */ + if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) { + nuke(ep, 0); + del_timer(&dev->timer); + ep0_idle(dev); + } + + switch (dev->ep0state) { + case EP0_IDLE: + /* late-breaking status? */ + udccs0 = UDCCS0; + + /* start control request? */ + if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE)) + == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) { + int i; + + nuke (ep, -EPROTO); + + /* read SETUP packet */ + for (i = 0; i < 8; i++) { + if (unlikely(!(UDCCS0 & UDCCS0_RNE))) { +bad_setup: + DMSG("SETUP %d!\n", i); + goto stall; + } + u.raw [i] = (u8) UDDR0; + } + if (unlikely((UDCCS0 & UDCCS0_RNE) != 0)) + goto bad_setup; + +got_setup: + DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + le16_to_cpu(u.r.wValue), + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wLength)); + + /* cope with automagic for some standard requests. */ + dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) + == USB_TYPE_STANDARD; + dev->req_config = 0; + dev->req_pending = 1; + switch (u.r.bRequest) { + /* hardware restricts gadget drivers here! */ + case USB_REQ_SET_CONFIGURATION: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + /* reflect hardware's automagic + * up to the gadget driver. + */ +config_change: + dev->req_config = 1; + clear_ep_state(dev); + /* if !has_cfr, there's no synch + * else use AREN (later) not SA|OPR + * USIR0_IR0 acts edge sensitive + */ + } + break; + /* ... and here, even more ... */ + case USB_REQ_SET_INTERFACE: + if (u.r.bRequestType == USB_RECIP_INTERFACE) { + /* udc hardware is broken by design: + * - altsetting may only be zero; + * - hw resets all interfaces' eps; + * - ep reset doesn't include halt(?). + */ + DMSG("broken set_interface (%d/%d)\n", + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wValue)); + goto config_change; + } + break; + /* hardware was supposed to hide this */ + case USB_REQ_SET_ADDRESS: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + ep0start(dev, 0, "address"); + return; + } + break; + } + + if (u.r.bRequestType & USB_DIR_IN) + dev->ep0state = EP0_IN_DATA_PHASE; + else + dev->ep0state = EP0_OUT_DATA_PHASE; + + i = dev->driver->setup(&dev->gadget, &u.r); + if (i < 0) { + /* hardware automagic preventing STALL... */ + if (dev->req_config) { + /* hardware sometimes neglects to tell + * tell us about config change events, + * so later ones may fail... + */ + WARN("config change %02x fail %d?\n", + u.r.bRequest, i); + return; + /* TODO experiment: if has_cfr, + * hardware didn't ACK; maybe we + * could actually STALL! + */ + } + DBG(DBG_VERBOSE, "protocol STALL, " + "%02x err %d\n", UDCCS0, i); +stall: + /* the watchdog timer helps deal with cases + * where udc seems to clear FST wrongly, and + * then NAKs instead of STALLing. + */ + ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall"); + start_watchdog(dev); + dev->ep0state = EP0_STALL; + + /* deferred i/o == no response yet */ + } else if (dev->req_pending) { + if (likely(dev->ep0state == EP0_IN_DATA_PHASE + || dev->req_std || u.r.wLength)) + ep0start(dev, 0, "defer"); + else + ep0start(dev, UDCCS0_IPR, "defer/IPR"); + } + + /* expect at least one data or status stage irq */ + return; + + } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA)) + == (UDCCS0_OPR|UDCCS0_SA))) { + unsigned i; + + /* pxa210/250 erratum 131 for B0/B1 says RNE lies. + * still observed on a pxa255 a0. + */ + DBG(DBG_VERBOSE, "e131\n"); + nuke(ep, -EPROTO); + + /* read SETUP data, but don't trust it too much */ + for (i = 0; i < 8; i++) + u.raw [i] = (u8) UDDR0; + if ((u.r.bRequestType & USB_RECIP_MASK) + > USB_RECIP_OTHER) + goto stall; + if (u.word [0] == 0 && u.word [1] == 0) + goto stall; + goto got_setup; + } else { + /* some random early IRQ: + * - we acked FST + * - IPR cleared + * - OPR got set, without SA (likely status stage) + */ + UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR); + } + break; + case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + UDCCS0 = UDCCS0_OPR|UDCCS0_FTF; + DBG(DBG_VERBOSE, "ep0in premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } else /* irq was IPR clearing */ { + if (req) { + /* this IN packet might finish the request */ + (void) write_ep0_fifo(ep, req); + } /* else IN token before response was written */ + } + break; + case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + if (req) { + /* this OUT packet might finish the request */ + if (read_ep0_fifo(ep, req)) + done(ep, req, 0); + /* else more OUT packets expected */ + } /* else OUT token before read was issued */ + } else /* irq was IPR clearing */ { + DBG(DBG_VERBOSE, "ep0out premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } + break; + case EP0_END_XFER: + if (req) + done(ep, req, 0); + /* ack control-IN status (maybe in-zlp was skipped) + * also appears after some config change events. + */ + if (udccs0 & UDCCS0_OPR) + UDCCS0 = UDCCS0_OPR; + ep0_idle(dev); + break; + case EP0_STALL: + UDCCS0 = UDCCS0_FST; + break; + } + USIR0 = USIR0_IR0; +} + +static void handle_ep(struct pxa2xx_ep *ep) +{ + struct pxa2xx_request *req; + int is_in = ep->bEndpointAddress & USB_DIR_IN; + int completed; + u32 udccs, tmp; + + do { + completed = 0; + if (likely (!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct pxa2xx_request, queue); + else + req = NULL; + + // TODO check FST handling + + udccs = *ep->reg_udccs; + if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */ + tmp = UDCCS_BI_TUR; + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp |= UDCCS_BI_SST; + tmp &= udccs; + if (likely (tmp)) + *ep->reg_udccs = tmp; + if (req && likely ((udccs & UDCCS_BI_TFS) != 0)) + completed = write_fifo(ep, req); + + } else { /* irq from RPC (or for ISO, ROF) */ + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp = UDCCS_BO_SST | UDCCS_BO_DME; + else + tmp = UDCCS_IO_ROF | UDCCS_IO_DME; + tmp &= udccs; + if (likely(tmp)) + *ep->reg_udccs = tmp; + + /* fifos can hold packets, ready for reading... */ + if (likely(req)) { +#ifdef USE_OUT_DMA +// TODO didn't yet debug out-dma. this approach assumes +// the worst about short packets and RPC; it might be better. + + if (likely(ep->dma >= 0)) { + if (!(udccs & UDCCS_BO_RSP)) { + *ep->reg_udccs = UDCCS_BO_RPC; + ep->dma_irqs++; + return; + } + } +#endif + completed = read_fifo(ep, req); + } else + pio_irq_disable (ep->bEndpointAddress); + } + ep->pio_irqs++; + } while (completed); +} + +/* + * pxa2xx_udc_irq - interrupt handler + * + * avoid delays in ep0 processing. the control handshaking isn't always + * under software control (pxa250c0 and the pxa255 are better), and delays + * could cause usb protocol errors. + */ +static irqreturn_t +pxa2xx_udc_irq(int irq, void *_dev, struct pt_regs *r) +{ + struct pxa2xx_udc *dev = _dev; + int handled; + + dev->stats.irqs++; + HEX_DISPLAY(dev->stats.irqs); + do { + u32 udccr = UDCCR; + + handled = 0; + + /* SUSpend Interrupt Request */ + if (unlikely(udccr & UDCCR_SUSIR)) { + udc_ack_int_UDCCR(UDCCR_SUSIR); + handled = 1; + DBG(DBG_VERBOSE, "USB suspend%s\n", is_usb_connected() + ? "" : "+disconnect"); + + if (!is_usb_connected()) + stop_activity(dev, dev->driver); + else if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + ep0_idle (dev); + } + + /* RESume Interrupt Request */ + if (unlikely(udccr & UDCCR_RESIR)) { + udc_ack_int_UDCCR(UDCCR_RESIR); + handled = 1; + DBG(DBG_VERBOSE, "USB resume\n"); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume + && is_usb_connected()) + dev->driver->resume(&dev->gadget); + } + + /* ReSeT Interrupt Request - USB reset */ + if (unlikely(udccr & UDCCR_RSTIR)) { + udc_ack_int_UDCCR(UDCCR_RSTIR); + handled = 1; + + if ((UDCCR & UDCCR_UDA) == 0) { + DBG(DBG_VERBOSE, "USB reset start\n"); + + /* reset driver and endpoints, + * in case that's not yet done + */ + stop_activity (dev, dev->driver); + + } else { + DBG(DBG_VERBOSE, "USB reset end\n"); + dev->gadget.speed = USB_SPEED_FULL; + LED_CONNECTED_ON; + memset(&dev->stats, 0, sizeof dev->stats); + /* driver and endpoints are still reset */ + } + + } else { + u32 usir0 = USIR0 & ~UICR0; + u32 usir1 = USIR1 & ~UICR1; + int i; + + if (unlikely (!usir0 && !usir1)) + continue; + + DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0); + + /* control traffic */ + if (usir0 & USIR0_IR0) { + dev->ep[0].pio_irqs++; + handle_ep0(dev); + handled = 1; + } + + /* endpoint data transfers */ + for (i = 0; i < 8; i++) { + u32 tmp = 1 << i; + + if (i && (usir0 & tmp)) { + handle_ep(&dev->ep[i]); + USIR0 |= tmp; + handled = 1; + } + if (usir1 & tmp) { + handle_ep(&dev->ep[i+8]); + USIR1 |= tmp; + handled = 1; + } + } + } + + /* we could also ask for 1 msec SOF (SIR) interrupts */ + + } while (handled); + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void nop_release (struct device *dev) +{ + DMSG("%s %s\n", __FUNCTION__, dev->bus_id); +} + +/* this uses load-time allocation and initialization (instead of + * doing it at run-time) to save code, eliminate fault paths, and + * be more obviously correct. + */ +static struct pxa2xx_udc memory = { + .gadget = { + .ops = &pxa2xx_udc_ops, + .ep0 = &memory.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, + }, + }, + + /* control endpoint */ + .ep[0] = { + .ep = { + .name = ep0name, + .ops = &pxa2xx_ep_ops, + .maxpacket = EP0_FIFO_SIZE, + }, + .dev = &memory, + .reg_udccs = &UDCCS0, + .reg_uddr = &UDDR0, + }, + + /* first group of endpoints */ + .ep[1] = { + .ep = { + .name = "ep1in-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS1, + .reg_uddr = &UDDR1, + drcmr (25) + }, + .ep[2] = { + .ep = { + .name = "ep2out-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 2, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS2, + .reg_ubcr = &UBCR2, + .reg_uddr = &UDDR2, + drcmr (26) + }, +#ifndef CONFIG_USB_PXA2XX_SMALL + .ep[3] = { + .ep = { + .name = "ep3in-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 3, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS3, + .reg_uddr = &UDDR3, + drcmr (27) + }, + .ep[4] = { + .ep = { + .name = "ep4out-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 4, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS4, + .reg_ubcr = &UBCR4, + .reg_uddr = &UDDR4, + drcmr (28) + }, + .ep[5] = { + .ep = { + .name = "ep5in-int", + .ops = &pxa2xx_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 5, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS5, + .reg_uddr = &UDDR5, + }, + + /* second group of endpoints */ + .ep[6] = { + .ep = { + .name = "ep6in-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 6, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS6, + .reg_uddr = &UDDR6, + drcmr (30) + }, + .ep[7] = { + .ep = { + .name = "ep7out-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 7, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS7, + .reg_ubcr = &UBCR7, + .reg_uddr = &UDDR7, + drcmr (31) + }, + .ep[8] = { + .ep = { + .name = "ep8in-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 8, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS8, + .reg_uddr = &UDDR8, + drcmr (32) + }, + .ep[9] = { + .ep = { + .name = "ep9out-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 9, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS9, + .reg_ubcr = &UBCR9, + .reg_uddr = &UDDR9, + drcmr (33) + }, + .ep[10] = { + .ep = { + .name = "ep10in-int", + .ops = &pxa2xx_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 10, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS10, + .reg_uddr = &UDDR10, + }, + + /* third group of endpoints */ + .ep[11] = { + .ep = { + .name = "ep11in-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 11, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS11, + .reg_uddr = &UDDR11, + drcmr (35) + }, + .ep[12] = { + .ep = { + .name = "ep12out-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 12, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS12, + .reg_ubcr = &UBCR12, + .reg_uddr = &UDDR12, + drcmr (36) + }, + .ep[13] = { + .ep = { + .name = "ep13in-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 13, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS13, + .reg_uddr = &UDDR13, + drcmr (37) + }, + .ep[14] = { + .ep = { + .name = "ep14out-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 14, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS14, + .reg_ubcr = &UBCR14, + .reg_uddr = &UDDR14, + drcmr (38) + }, + .ep[15] = { + .ep = { + .name = "ep15in-int", + .ops = &pxa2xx_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 15, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS15, + .reg_uddr = &UDDR15, + }, +#endif /* !CONFIG_USB_PXA2XX_SMALL */ +}; + +#define CP15R0_VENDOR_MASK 0xffffe000 + +#if defined(CONFIG_ARCH_PXA) +#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */ + +#elif defined(CONFIG_ARCH_IXP4XX) +#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */ + +#endif + +#define CP15R0_PROD_MASK 0x000003f0 +#define PXA25x 0x00000100 /* and PXA26x */ +#define PXA210 0x00000120 + +#define CP15R0_REV_MASK 0x0000000f + +#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK) + +#define PXA255_A0 0x00000106 /* or PXA260_B1 */ +#define PXA250_C0 0x00000105 /* or PXA26x_B0 */ +#define PXA250_B2 0x00000104 +#define PXA250_B1 0x00000103 /* or PXA260_A0 */ +#define PXA250_B0 0x00000102 +#define PXA250_A1 0x00000101 +#define PXA250_A0 0x00000100 + +#define PXA210_C0 0x00000125 +#define PXA210_B2 0x00000124 +#define PXA210_B1 0x00000123 +#define PXA210_B0 0x00000122 +#define IXP425_A0 0x000001c1 + +/* + * probe - binds to the platform device + */ +static int __init pxa2xx_udc_probe(struct device *_dev) +{ + struct pxa2xx_udc *dev = &memory; + int retval, out_dma = 1; + u32 chiprev; + + /* insist on Intel/ARM/XScale */ + asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev)); + if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { + printk(KERN_ERR "%s: not XScale!\n", driver_name); + return -ENODEV; + } + + /* trigger chiprev-specific logic */ + switch (chiprev & CP15R0_PRODREV_MASK) { +#if defined(CONFIG_ARCH_PXA) + case PXA255_A0: + dev->has_cfr = 1; + break; + case PXA250_A0: + case PXA250_A1: + /* A0/A1 "not released"; ep 13, 15 unusable */ + /* fall through */ + case PXA250_B2: case PXA210_B2: + case PXA250_B1: case PXA210_B1: + case PXA250_B0: case PXA210_B0: + out_dma = 0; + /* fall through */ + case PXA250_C0: case PXA210_C0: + break; +#elif defined(CONFIG_ARCH_IXP4XX) + case IXP425_A0: + out_dma = 0; + break; +#endif + default: + out_dma = 0; + printk(KERN_ERR "%s: unrecognized processor: %08x\n", + driver_name, chiprev); + /* iop3xx, ixp4xx, ... */ + return -ENODEV; + } + + pr_debug("%s: IRQ %d%s%s%s\n", driver_name, IRQ_USB, + dev->has_cfr ? "" : " (!cfr)", + out_dma ? "" : " (broken dma-out)", + SIZE_STR DMASTR + ); + +#ifdef USE_DMA +#ifndef USE_OUT_DMA + out_dma = 0; +#endif + /* pxa 250 erratum 130 prevents using OUT dma (fixed C0) */ + if (!out_dma) { + DMSG("disabled OUT dma\n"); + dev->ep[ 2].reg_drcmr = dev->ep[ 4].reg_drcmr = 0; + dev->ep[ 7].reg_drcmr = dev->ep[ 9].reg_drcmr = 0; + dev->ep[12].reg_drcmr = dev->ep[14].reg_drcmr = 0; + } +#endif + + /* other non-static parts of init */ + dev->dev = _dev; + dev->mach = _dev->platform_data; + + init_timer(&dev->timer); + dev->timer.function = udc_watchdog; + dev->timer.data = (unsigned long) dev; + + device_initialize(&dev->gadget.dev); + dev->gadget.dev.parent = _dev; + dev->gadget.dev.dma_mask = _dev->dma_mask; + + the_controller = dev; + dev_set_drvdata(_dev, dev); + + udc_disable(dev); + udc_reinit(dev); + + dev->vbus = is_usb_connected(); + + /* irq setup after old hardware state is cleaned up */ + retval = request_irq(IRQ_USB, pxa2xx_udc_irq, + SA_INTERRUPT, driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, IRQ_USB, retval); + return -EBUSY; + } + dev->got_irq = 1; + +#ifdef CONFIG_ARCH_LUBBOCK + if (machine_is_lubbock()) { + retval = request_irq(LUBBOCK_USB_DISC_IRQ, + lubbock_vbus_irq, + SA_INTERRUPT | SA_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, LUBBOCK_USB_DISC_IRQ, retval); +lubbock_fail0: + free_irq(IRQ_USB, dev); + return -EBUSY; + } + retval = request_irq(LUBBOCK_USB_IRQ, + lubbock_vbus_irq, + SA_INTERRUPT | SA_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, LUBBOCK_USB_IRQ, retval); + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + goto lubbock_fail0; + } +#ifdef DEBUG + /* with U-Boot (but not BLOB), hex is off by default */ + HEX_DISPLAY(dev->stats.irqs); + LUB_DISC_BLNK_LED &= 0xff; +#endif + } +#endif + create_proc_files(); + + return 0; +} +static int __exit pxa2xx_udc_remove(struct device *_dev) +{ + struct pxa2xx_udc *dev = dev_get_drvdata(_dev); + + udc_disable(dev); + remove_proc_files(); + usb_gadget_unregister_driver(dev->driver); + + if (dev->got_irq) { + free_irq(IRQ_USB, dev); + dev->got_irq = 0; + } + if (machine_is_lubbock()) { + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + free_irq(LUBBOCK_USB_IRQ, dev); + } + dev_set_drvdata(_dev, NULL); + the_controller = NULL; + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* USB suspend (controlled by the host) and system suspend (controlled + * by the PXA) don't necessarily work well together. If USB is active, + * the 48 MHz clock is required; so the system can't enter 33 MHz idle + * mode, or any deeper PM saving state. + * + * For now, we punt and forcibly disconnect from the USB host when PXA + * enters any suspend state. While we're disconnected, we always disable + * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. + * Boards without software pullup control shouldn't use those states. + * VBUS IRQs should probably be ignored so that the PXA device just acts + * "dead" to USB hosts until system resume. + */ +static int pxa2xx_udc_suspend(struct device *dev, u32 state, u32 level) +{ + struct pxa2xx_udc *udc = dev_get_drvdata(dev); + + if (level == SUSPEND_POWER_DOWN) { + if (!udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); + pullup(udc, 0); + } + return 0; +} + +static int pxa2xx_udc_resume(struct device *dev, u32 level) +{ + struct pxa2xx_udc *udc = dev_get_drvdata(dev); + + if (level == RESUME_POWER_ON) + pullup(udc, 1); + return 0; +} + +#else +#define pxa2xx_udc_suspend NULL +#define pxa2xx_udc_resume NULL +#endif + +/*-------------------------------------------------------------------------*/ + +static struct device_driver udc_driver = { + .name = "pxa2xx-udc", + .bus = &platform_bus_type, + .probe = pxa2xx_udc_probe, + .remove = __exit_p(pxa2xx_udc_remove), + .suspend = pxa2xx_udc_suspend, + .resume = pxa2xx_udc_resume, +}; + +static int __init udc_init(void) +{ + printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); + return driver_register(&udc_driver); +} +module_init(udc_init); + +static void __exit udc_exit(void) +{ + driver_unregister(&udc_driver); +} +module_exit(udc_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h new file mode 100644 index 0000000..1f3a7d9 --- /dev/null +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -0,0 +1,320 @@ +/* + * linux/drivers/usb/gadget/pxa2xx_udc.h + * Intel PXA2xx on-chip full speed USB device controller + * + * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix + * Copyright (C) 2003 David Brownell + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_GADGET_PXA2XX_H +#define __LINUX_USB_GADGET_PXA2XX_H + +#include <linux/types.h> + +/*-------------------------------------------------------------------------*/ + +/* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ +#define UFNRH_SIR (1 << 7) /* SOF interrupt request */ +#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ +#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ +#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ +#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ + +/* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ +#define UDCCFR UDC_RES2 /* UDC Control Function Register */ +#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ +#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ + +/* latest pxa255 errata define new "must be one" bits in UDCCFR */ +#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM)) + +/*-------------------------------------------------------------------------*/ + +struct pxa2xx_udc; + +struct pxa2xx_ep { + struct usb_ep ep; + struct pxa2xx_udc *dev; + + const struct usb_endpoint_descriptor *desc; + struct list_head queue; + unsigned long pio_irqs; + unsigned long dma_irqs; + short dma; + + unsigned short fifo_size; + u8 bEndpointAddress; + u8 bmAttributes; + + unsigned stopped : 1; + unsigned dma_fixup : 1; + + /* UDCCS = UDC Control/Status for this EP + * UBCR = UDC Byte Count Remaining (contents of OUT fifo) + * UDDR = UDC Endpoint Data Register (the fifo) + * DRCM = DMA Request Channel Map + */ + volatile u32 *reg_udccs; + volatile u32 *reg_ubcr; + volatile u32 *reg_uddr; +#ifdef USE_DMA + volatile u32 *reg_drcmr; +#define drcmr(n) .reg_drcmr = & DRCMR ## n , +#else +#define drcmr(n) +#endif +}; + +struct pxa2xx_request { + struct usb_request req; + struct list_head queue; +}; + +enum ep0_state { + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_END_XFER, + EP0_STALL, +}; + +#define EP0_FIFO_SIZE ((unsigned)16) +#define BULK_FIFO_SIZE ((unsigned)64) +#define ISO_FIFO_SIZE ((unsigned)256) +#define INT_FIFO_SIZE ((unsigned)8) + +struct udc_stats { + struct ep0stats { + unsigned long ops; + unsigned long bytes; + } read, write; + unsigned long irqs; +}; + +#ifdef CONFIG_USB_PXA2XX_SMALL +/* when memory's tight, SMALL config saves code+data. */ +#undef USE_DMA +#define PXA_UDC_NUM_ENDPOINTS 3 +#endif + +#ifndef PXA_UDC_NUM_ENDPOINTS +#define PXA_UDC_NUM_ENDPOINTS 16 +#endif + +struct pxa2xx_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + enum ep0_state ep0state; + struct udc_stats stats; + unsigned got_irq : 1, + vbus : 1, + pullup : 1, + has_cfr : 1, + req_pending : 1, + req_std : 1, + req_config : 1; + +#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) + struct timer_list timer; + + struct device *dev; + struct pxa2xx_udc_mach_info *mach; + u64 dma_mask; + struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS]; +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_LUBBOCK +#include <asm/arch/lubbock.h> +/* lubbock can also report usb connect/disconnect irqs */ + +#ifdef DEBUG +#define HEX_DISPLAY(n) if (machine_is_lubbock()) { LUB_HEXLED = (n); } +#endif + +#endif + +/*-------------------------------------------------------------------------*/ + +/* LEDs are only for debug */ +#ifndef HEX_DISPLAY +#define HEX_DISPLAY(n) do {} while(0) +#endif + +#ifdef DEBUG +#include <asm/leds.h> + +#define LED_CONNECTED_ON leds_event(led_green_on) +#define LED_CONNECTED_OFF do { \ + leds_event(led_green_off); \ + HEX_DISPLAY(0); \ + } while(0) +#endif + +#ifndef LED_CONNECTED_ON +#define LED_CONNECTED_ON do {} while(0) +#define LED_CONNECTED_OFF do {} while(0) +#endif + +/*-------------------------------------------------------------------------*/ + +static struct pxa2xx_udc *the_controller; + +/* one GPIO should be used to detect host disconnect */ +static inline int is_usb_connected(void) +{ + if (!the_controller->mach->udc_is_connected) + return 1; + return the_controller->mach->udc_is_connected(); +} + +/* one GPIO should force the host to see this device (or not) */ +static inline void make_usb_disappear(void) +{ + if (!the_controller->mach->udc_command) + return; + the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); +} + +static inline void let_usb_appear(void) +{ + if (!the_controller->mach->udc_command) + return; + the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); +} + +/*-------------------------------------------------------------------------*/ + +/* + * Debugging support vanishes in non-debug builds. DBG_NORMAL should be + * mostly silent during normal use/testing, with no timing side-effects. + */ +#define DBG_NORMAL 1 /* error paths, device state transitions */ +#define DBG_VERBOSE 2 /* add some success path trace info */ +#define DBG_NOISY 3 /* ... even more: request level */ +#define DBG_VERY_NOISY 4 /* ... even more: packet level */ + +#ifdef DEBUG + +static const char *state_name[] = { + "EP0_IDLE", + "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", + "EP0_END_XFER", "EP0_STALL" +}; + +#define DMSG(stuff...) printk(KERN_DEBUG "udc: " stuff) + +#ifdef VERBOSE +# define UDC_DEBUG DBG_VERBOSE +#else +# define UDC_DEBUG DBG_NORMAL +#endif + +static void __attribute__ ((__unused__)) +dump_udccr(const char *label) +{ + u32 udccr = UDCCR; + DMSG("%s %02X =%s%s%s%s%s%s%s%s\n", + label, udccr, + (udccr & UDCCR_REM) ? " rem" : "", + (udccr & UDCCR_RSTIR) ? " rstir" : "", + (udccr & UDCCR_SRM) ? " srm" : "", + (udccr & UDCCR_SUSIR) ? " susir" : "", + (udccr & UDCCR_RESIR) ? " resir" : "", + (udccr & UDCCR_RSM) ? " rsm" : "", + (udccr & UDCCR_UDA) ? " uda" : "", + (udccr & UDCCR_UDE) ? " ude" : ""); +} + +static void __attribute__ ((__unused__)) +dump_udccs0(const char *label) +{ + u32 udccs0 = UDCCS0; + + DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n", + label, state_name[the_controller->ep0state], udccs0, + (udccs0 & UDCCS0_SA) ? " sa" : "", + (udccs0 & UDCCS0_RNE) ? " rne" : "", + (udccs0 & UDCCS0_FST) ? " fst" : "", + (udccs0 & UDCCS0_SST) ? " sst" : "", + (udccs0 & UDCCS0_DRWF) ? " dwrf" : "", + (udccs0 & UDCCS0_FTF) ? " ftf" : "", + (udccs0 & UDCCS0_IPR) ? " ipr" : "", + (udccs0 & UDCCS0_OPR) ? " opr" : ""); +} + +static void __attribute__ ((__unused__)) +dump_state(struct pxa2xx_udc *dev) +{ + u32 tmp; + unsigned i; + + DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + is_usb_connected() ? "host " : "disconnected", + state_name[dev->ep0state], + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); + dump_udccr("udccr"); + if (dev->has_cfr) { + tmp = UDCCFR; + DMSG("udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); + } + + if (!dev->driver) { + DMSG("no gadget driver bound\n"); + return; + } else + DMSG("ep0 driver '%s'\n", dev->driver->driver.name); + + if (!is_usb_connected()) + return; + + dump_udccs0 ("udccs0"); + DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops); + + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { + if (dev->ep [i].desc == 0) + continue; + DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs); + } +} + +#else + +#define DMSG(stuff...) do{}while(0) + +#define dump_udccr(x) do{}while(0) +#define dump_udccs0(x) do{}while(0) +#define dump_state(x) do{}while(0) + +#define UDC_DEBUG ((unsigned)0) + +#endif + +#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0) + +#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff) +#define INFO(stuff...) printk(KERN_INFO "udc: " stuff) + + +#endif /* __LINUX_USB_GADGET_PXA2XX_H */ diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c new file mode 100644 index 0000000..6c51978 --- /dev/null +++ b/drivers/usb/gadget/rndis.c @@ -0,0 +1,1428 @@ +/* + * RNDIS MSG parser + * + * Version: $Id: rndis.c,v 1.19 2004/03/25 21:33:46 robert Exp $ + * + * Authors: Benedikt Spranger, Pengutronix + * Robert Schwebel, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, as published by the Free Software Foundation. + * + * This software was originally developed in conformance with + * Microsoft's Remote NDIS Specification License Agreement. + * + * 03/12/2004 Kai-Uwe Bloem <linux-development@auerswald.de> + * Fixed message length bug in init_response + * + * 03/25/2004 Kai-Uwe Bloem <linux-development@auerswald.de> + * Fixed rndis_rm_hdr length bug. + * + * Copyright (C) 2004 by David Brownell + * updates to merge with Linux 2.6, better match RNDIS spec + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/proc_fs.h> +#include <linux/netdevice.h> + +#include <asm/io.h> +#include <asm/byteorder.h> +#include <asm/system.h> + + +#undef RNDIS_PM +#undef VERBOSE + +#include "rndis.h" + + +/* The driver for your USB chip needs to support ep0 OUT to work with + * RNDIS, plus all three CDC Ethernet endpoints (interrupt not optional). + * + * Windows hosts need an INF file like Documentation/usb/linux.inf + * and will be happier if you provide the host_addr module parameter. + */ + +#if 0 +#define DEBUG(str,args...) do { \ + if (rndis_debug) \ + printk(KERN_DEBUG str , ## args ); \ + } while (0) +static int rndis_debug = 0; + +module_param (rndis_debug, bool, 0); +MODULE_PARM_DESC (rndis_debug, "enable debugging"); + +#else + +#define rndis_debug 0 +#define DEBUG(str,args...) do{}while(0) +#endif + +#define RNDIS_MAX_CONFIGS 1 + + +static rndis_params rndis_per_dev_params [RNDIS_MAX_CONFIGS]; + +/* Driver Version */ +static const __le32 rndis_driver_version = __constant_cpu_to_le32 (1); + +/* Function Prototypes */ +static int rndis_init_response (int configNr, rndis_init_msg_type *buf); +static int rndis_query_response (int configNr, rndis_query_msg_type *buf); +static int rndis_set_response (int configNr, rndis_set_msg_type *buf); +static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf); +static int rndis_keepalive_response (int configNr, + rndis_keepalive_msg_type *buf); + +static rndis_resp_t *rndis_add_response (int configNr, u32 length); + + +/* NDIS Functions */ +static int gen_ndis_query_resp (int configNr, u32 OID, rndis_resp_t *r) +{ + int retval = -ENOTSUPP; + u32 length = 0; + __le32 *tmp; + int i, count; + rndis_query_cmplt_type *resp; + + if (!r) return -ENOMEM; + resp = (rndis_query_cmplt_type *) r->buf; + + if (!resp) return -ENOMEM; + + switch (OID) { + + /* general oids (table 4-1) */ + + /* mandatory */ + case OID_GEN_SUPPORTED_LIST: + DEBUG ("%s: OID_GEN_SUPPORTED_LIST\n", __FUNCTION__); + length = sizeof (oid_supported_list); + count = length / sizeof (u32); + tmp = (__le32 *) ((u8 *)resp + 24); + for (i = 0; i < count; i++) + tmp[i] = cpu_to_le32 (oid_supported_list[i]); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_HARDWARE_STATUS: + DEBUG("%s: OID_GEN_HARDWARE_STATUS\n", __FUNCTION__); + length = 4; + /* Bogus question! + * Hardware must be ready to receive high level protocols. + * BTW: + * reddite ergo quae sunt Caesaris Caesari + * et quae sunt Dei Deo! + */ + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_MEDIA_SUPPORTED: + DEBUG("%s: OID_GEN_MEDIA_SUPPORTED\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].medium); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_MEDIA_IN_USE: + DEBUG("%s: OID_GEN_MEDIA_IN_USE\n", __FUNCTION__); + length = 4; + /* one medium, one transport... (maybe you do it better) */ + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].medium); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_MAXIMUM_FRAME_SIZE: + DEBUG("%s: OID_GEN_MAXIMUM_FRAME_SIZE\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].dev) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].dev->mtu); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + /* mandatory */ + case OID_GEN_LINK_SPEED: + DEBUG("%s: OID_GEN_LINK_SPEED\n", __FUNCTION__); + length = 4; + if (rndis_per_dev_params [configNr].media_state + == NDIS_MEDIA_STATE_DISCONNECTED) + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + else + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].speed); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_TRANSMIT_BLOCK_SIZE: + DEBUG("%s: OID_GEN_TRANSMIT_BLOCK_SIZE\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].dev) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].dev->mtu); + retval = 0; + } + break; + + /* mandatory */ + case OID_GEN_RECEIVE_BLOCK_SIZE: + DEBUG("%s: OID_GEN_RECEIVE_BLOCK_SIZE\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].dev) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].dev->mtu); + retval = 0; + } + break; + + /* mandatory */ + case OID_GEN_VENDOR_ID: + DEBUG("%s: OID_GEN_VENDOR_ID\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].vendorID); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_VENDOR_DESCRIPTION: + DEBUG("%s: OID_GEN_VENDOR_DESCRIPTION\n", __FUNCTION__); + length = strlen (rndis_per_dev_params [configNr].vendorDescr); + memcpy ((u8 *) resp + 24, + rndis_per_dev_params [configNr].vendorDescr, length); + retval = 0; + break; + + case OID_GEN_VENDOR_DRIVER_VERSION: + DEBUG("%s: OID_GEN_VENDOR_DRIVER_VERSION\n", __FUNCTION__); + length = 4; + /* Created as LE */ + *((__le32 *) resp + 6) = rndis_driver_version; + retval = 0; + break; + + /* mandatory */ + case OID_GEN_CURRENT_PACKET_FILTER: + DEBUG("%s: OID_GEN_CURRENT_PACKET_FILTER\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params[configNr].filter); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_MAXIMUM_TOTAL_SIZE: + DEBUG("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = __constant_cpu_to_le32( + RNDIS_MAX_TOTAL_SIZE); + retval = 0; + break; + + /* mandatory */ + case OID_GEN_MEDIA_CONNECT_STATUS: + DEBUG("%s: OID_GEN_MEDIA_CONNECT_STATUS\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .media_state); + retval = 0; + break; + + case OID_GEN_PHYSICAL_MEDIUM: + DEBUG("%s: OID_GEN_PHYSICAL_MEDIUM\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + break; + + /* The RNDIS specification is incomplete/wrong. Some versions + * of MS-Windows expect OIDs that aren't specified there. Other + * versions emit undefined RNDIS messages. DOCUMENT ALL THESE! + */ + case OID_GEN_MAC_OPTIONS: /* from WinME */ + DEBUG("%s: OID_GEN_MAC_OPTIONS\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = __constant_cpu_to_le32( + NDIS_MAC_OPTION_RECEIVE_SERIALIZED + | NDIS_MAC_OPTION_FULL_DUPLEX); + retval = 0; + break; + + /* statistics OIDs (table 4-2) */ + + /* mandatory */ + case OID_GEN_XMIT_OK: + DEBUG("%s: OID_GEN_XMIT_OK\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].stats->tx_packets - + rndis_per_dev_params [configNr].stats->tx_errors - + rndis_per_dev_params [configNr].stats->tx_dropped); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + /* mandatory */ + case OID_GEN_RCV_OK: + DEBUG("%s: OID_GEN_RCV_OK\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr].stats->rx_packets - + rndis_per_dev_params [configNr].stats->rx_errors - + rndis_per_dev_params [configNr].stats->rx_dropped); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + /* mandatory */ + case OID_GEN_XMIT_ERROR: + DEBUG("%s: OID_GEN_XMIT_ERROR\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->tx_errors); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + /* mandatory */ + case OID_GEN_RCV_ERROR: + DEBUG("%s: OID_GEN_RCV_ERROR\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->rx_errors); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + /* mandatory */ + case OID_GEN_RCV_NO_BUFFER: + DEBUG("%s: OID_GEN_RCV_NO_BUFFER\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->rx_dropped); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + +#ifdef RNDIS_OPTIONAL_STATS + case OID_GEN_DIRECTED_BYTES_XMIT: + DEBUG("%s: OID_GEN_DIRECTED_BYTES_XMIT\n", __FUNCTION__); + /* + * Aunt Tilly's size of shoes + * minus antarctica count of penguins + * divided by weight of Alpha Centauri + */ + if (rndis_per_dev_params [configNr].stats) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + (rndis_per_dev_params [configNr] + .stats->tx_packets - + rndis_per_dev_params [configNr] + .stats->tx_errors - + rndis_per_dev_params [configNr] + .stats->tx_dropped) + * 123); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_DIRECTED_FRAMES_XMIT: + DEBUG("%s: OID_GEN_DIRECTED_FRAMES_XMIT\n", __FUNCTION__); + /* dito */ + if (rndis_per_dev_params [configNr].stats) { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + (rndis_per_dev_params [configNr] + .stats->tx_packets - + rndis_per_dev_params [configNr] + .stats->tx_errors - + rndis_per_dev_params [configNr] + .stats->tx_dropped) + / 123); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_MULTICAST_BYTES_XMIT: + DEBUG("%s: OID_GEN_MULTICAST_BYTES_XMIT\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->multicast*1234); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_MULTICAST_FRAMES_XMIT: + DEBUG("%s: OID_GEN_MULTICAST_FRAMES_XMIT\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->multicast); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_BROADCAST_BYTES_XMIT: + DEBUG("%s: OID_GEN_BROADCAST_BYTES_XMIT\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->tx_packets/42*255); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_BROADCAST_FRAMES_XMIT: + DEBUG("%s: OID_GEN_BROADCAST_FRAMES_XMIT\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->tx_packets/42); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_DIRECTED_BYTES_RCV: + DEBUG("%s: OID_GEN_DIRECTED_BYTES_RCV\n", __FUNCTION__); + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + break; + + case OID_GEN_DIRECTED_FRAMES_RCV: + DEBUG("%s: OID_GEN_DIRECTED_FRAMES_RCV\n", __FUNCTION__); + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + break; + + case OID_GEN_MULTICAST_BYTES_RCV: + DEBUG("%s: OID_GEN_MULTICAST_BYTES_RCV\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->multicast * 1111); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_MULTICAST_FRAMES_RCV: + DEBUG("%s: OID_GEN_MULTICAST_FRAMES_RCV\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->multicast); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_BROADCAST_BYTES_RCV: + DEBUG("%s: OID_GEN_BROADCAST_BYTES_RCV\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->rx_packets/42*255); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_BROADCAST_FRAMES_RCV: + DEBUG("%s: OID_GEN_BROADCAST_FRAMES_RCV\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->rx_packets/42); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_RCV_CRC_ERROR: + DEBUG("%s: OID_GEN_RCV_CRC_ERROR\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) { + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->rx_crc_errors); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + case OID_GEN_TRANSMIT_QUEUE_LENGTH: + DEBUG("%s: OID_GEN_TRANSMIT_QUEUE_LENGTH\n", __FUNCTION__); + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + break; +#endif /* RNDIS_OPTIONAL_STATS */ + + /* ieee802.3 OIDs (table 4-3) */ + + /* mandatory */ + case OID_802_3_PERMANENT_ADDRESS: + DEBUG("%s: OID_802_3_PERMANENT_ADDRESS\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].dev) { + length = ETH_ALEN; + memcpy ((u8 *) resp + 24, + rndis_per_dev_params [configNr].host_mac, + length); + retval = 0; + } else { + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + } + break; + + /* mandatory */ + case OID_802_3_CURRENT_ADDRESS: + DEBUG("%s: OID_802_3_CURRENT_ADDRESS\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].dev) { + length = ETH_ALEN; + memcpy ((u8 *) resp + 24, + rndis_per_dev_params [configNr].host_mac, + length); + retval = 0; + } + break; + + /* mandatory */ + case OID_802_3_MULTICAST_LIST: + DEBUG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__); + length = 4; + /* Multicast base address only */ + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0xE0000000); + retval = 0; + break; + + /* mandatory */ + case OID_802_3_MAXIMUM_LIST_SIZE: + DEBUG("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __FUNCTION__); + length = 4; + /* Multicast base address only */ + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (1); + retval = 0; + break; + + case OID_802_3_MAC_OPTIONS: + DEBUG("%s: OID_802_3_MAC_OPTIONS\n", __FUNCTION__); + break; + + /* ieee802.3 statistics OIDs (table 4-4) */ + + /* mandatory */ + case OID_802_3_RCV_ERROR_ALIGNMENT: + DEBUG("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __FUNCTION__); + if (rndis_per_dev_params [configNr].stats) + { + length = 4; + *((__le32 *) resp + 6) = cpu_to_le32 ( + rndis_per_dev_params [configNr] + .stats->rx_frame_errors); + retval = 0; + } + break; + + /* mandatory */ + case OID_802_3_XMIT_ONE_COLLISION: + DEBUG("%s: OID_802_3_XMIT_ONE_COLLISION\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + break; + + /* mandatory */ + case OID_802_3_XMIT_MORE_COLLISIONS: + DEBUG("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __FUNCTION__); + length = 4; + *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0); + retval = 0; + break; + +#ifdef RNDIS_OPTIONAL_STATS + case OID_802_3_XMIT_DEFERRED: + DEBUG("%s: OID_802_3_XMIT_DEFERRED\n", __FUNCTION__); + /* TODO */ + break; + + case OID_802_3_XMIT_MAX_COLLISIONS: + DEBUG("%s: OID_802_3_XMIT_MAX_COLLISIONS\n", __FUNCTION__); + /* TODO */ + break; + + case OID_802_3_RCV_OVERRUN: + DEBUG("%s: OID_802_3_RCV_OVERRUN\n", __FUNCTION__); + /* TODO */ + break; + + case OID_802_3_XMIT_UNDERRUN: + DEBUG("%s: OID_802_3_XMIT_UNDERRUN\n", __FUNCTION__); + /* TODO */ + break; + + case OID_802_3_XMIT_HEARTBEAT_FAILURE: + DEBUG("%s: OID_802_3_XMIT_HEARTBEAT_FAILURE\n", __FUNCTION__); + /* TODO */ + break; + + case OID_802_3_XMIT_TIMES_CRS_LOST: + DEBUG("%s: OID_802_3_XMIT_TIMES_CRS_LOST\n", __FUNCTION__); + /* TODO */ + break; + + case OID_802_3_XMIT_LATE_COLLISIONS: + DEBUG("%s: OID_802_3_XMIT_LATE_COLLISIONS\n", __FUNCTION__); + /* TODO */ + break; +#endif /* RNDIS_OPTIONAL_STATS */ + +#ifdef RNDIS_PM + /* power management OIDs (table 4-5) */ + case OID_PNP_CAPABILITIES: + DEBUG("%s: OID_PNP_CAPABILITIES\n", __FUNCTION__); + + /* just PM, and remote wakeup on link status change + * (not magic packet or pattern match) + */ + length = sizeof (struct NDIS_PNP_CAPABILITIES); + memset (resp, 0, length); + { + struct NDIS_PNP_CAPABILITIES *caps = (void *) resp; + + caps->Flags = NDIS_DEVICE_WAKE_UP_ENABLE; + caps->WakeUpCapabilities.MinLinkChangeWakeUp + = NdisDeviceStateD3; + + /* FIXME then use usb_gadget_wakeup(), and + * set USB_CONFIG_ATT_WAKEUP in config desc + */ + } + retval = 0; + break; + case OID_PNP_QUERY_POWER: + DEBUG("%s: OID_PNP_QUERY_POWER\n", __FUNCTION__); + /* sure, handle any power state that maps to USB suspend */ + retval = 0; + break; +#endif + + default: + printk (KERN_WARNING "%s: query unknown OID 0x%08X\n", + __FUNCTION__, OID); + } + + resp->InformationBufferOffset = __constant_cpu_to_le32 (16); + resp->InformationBufferLength = cpu_to_le32 (length); + resp->MessageLength = cpu_to_le32 (24 + length); + r->length = 24 + length; + return retval; +} + +static int gen_ndis_set_resp (u8 configNr, u32 OID, u8 *buf, u32 buf_len, + rndis_resp_t *r) +{ + rndis_set_cmplt_type *resp; + int i, retval = -ENOTSUPP; + struct rndis_params *params; + + if (!r) + return -ENOMEM; + resp = (rndis_set_cmplt_type *) r->buf; + if (!resp) + return -ENOMEM; + + DEBUG("set OID %08x value, len %d:\n", OID, buf_len); + for (i = 0; i < buf_len; i += 16) { + DEBUG ("%03d: " + " %02x %02x %02x %02x" + " %02x %02x %02x %02x" + " %02x %02x %02x %02x" + " %02x %02x %02x %02x" + "\n", + i, + buf[i], buf [i+1], + buf[i+2], buf[i+3], + buf[i+4], buf [i+5], + buf[i+6], buf[i+7], + buf[i+8], buf [i+9], + buf[i+10], buf[i+11], + buf[i+12], buf [i+13], + buf[i+14], buf[i+15]); + } + + switch (OID) { + case OID_GEN_CURRENT_PACKET_FILTER: + params = &rndis_per_dev_params [configNr]; + retval = 0; + + /* FIXME use these NDIS_PACKET_TYPE_* bitflags to + * filter packets in hard_start_xmit() + * NDIS_PACKET_TYPE_x == USB_CDC_PACKET_TYPE_x for x in: + * PROMISCUOUS, DIRECTED, + * MULTICAST, ALL_MULTICAST, BROADCAST + */ + params->filter = le32_to_cpup((__le32 *)buf); + DEBUG("%s: OID_GEN_CURRENT_PACKET_FILTER %08x\n", + __FUNCTION__, params->filter); + + /* this call has a significant side effect: it's + * what makes the packet flow start and stop, like + * activating the CDC Ethernet altsetting. + */ + if (params->filter) { + params->state = RNDIS_DATA_INITIALIZED; + netif_carrier_on(params->dev); + if (netif_running(params->dev)) + netif_wake_queue (params->dev); + } else { + params->state = RNDIS_INITIALIZED; + netif_carrier_off (params->dev); + netif_stop_queue (params->dev); + } + break; + + case OID_802_3_MULTICAST_LIST: + /* I think we can ignore this */ + DEBUG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__); + retval = 0; + break; +#if 0 + case OID_GEN_RNDIS_CONFIG_PARAMETER: + { + struct rndis_config_parameter *param; + param = (struct rndis_config_parameter *) buf; + DEBUG("%s: OID_GEN_RNDIS_CONFIG_PARAMETER '%*s'\n", + __FUNCTION__, + min(cpu_to_le32(param->ParameterNameLength),80), + buf + param->ParameterNameOffset); + retval = 0; + } + break; +#endif + +#ifdef RNDIS_PM + case OID_PNP_SET_POWER: + DEBUG ("OID_PNP_SET_POWER\n"); + /* sure, handle any power state that maps to USB suspend */ + retval = 0; + break; + + case OID_PNP_ENABLE_WAKE_UP: + /* always-connected ... */ + DEBUG ("OID_PNP_ENABLE_WAKE_UP\n"); + retval = 0; + break; + + // no PM resume patterns supported (specified where?) + // so OID_PNP_{ADD,REMOVE}_WAKE_UP_PATTERN always fails +#endif + + default: + printk (KERN_WARNING "%s: set unknown OID 0x%08X, size %d\n", + __FUNCTION__, OID, buf_len); + } + + return retval; +} + +/* + * Response Functions + */ + +static int rndis_init_response (int configNr, rndis_init_msg_type *buf) +{ + rndis_init_cmplt_type *resp; + rndis_resp_t *r; + + if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP; + + r = rndis_add_response (configNr, sizeof (rndis_init_cmplt_type)); + + if (!r) return -ENOMEM; + + resp = (rndis_init_cmplt_type *) r->buf; + + if (!resp) return -ENOMEM; + + resp->MessageType = __constant_cpu_to_le32 ( + REMOTE_NDIS_INITIALIZE_CMPLT); + resp->MessageLength = __constant_cpu_to_le32 (52); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + resp->MajorVersion = __constant_cpu_to_le32 (RNDIS_MAJOR_VERSION); + resp->MinorVersion = __constant_cpu_to_le32 (RNDIS_MINOR_VERSION); + resp->DeviceFlags = __constant_cpu_to_le32 (RNDIS_DF_CONNECTIONLESS); + resp->Medium = __constant_cpu_to_le32 (RNDIS_MEDIUM_802_3); + resp->MaxPacketsPerTransfer = __constant_cpu_to_le32 (1); + resp->MaxTransferSize = cpu_to_le32 ( + rndis_per_dev_params [configNr].dev->mtu + + sizeof (struct ethhdr) + + sizeof (struct rndis_packet_msg_type) + + 22); + resp->PacketAlignmentFactor = __constant_cpu_to_le32 (0); + resp->AFListOffset = __constant_cpu_to_le32 (0); + resp->AFListSize = __constant_cpu_to_le32 (0); + + if (rndis_per_dev_params [configNr].ack) + rndis_per_dev_params [configNr].ack ( + rndis_per_dev_params [configNr].dev); + + return 0; +} + +static int rndis_query_response (int configNr, rndis_query_msg_type *buf) +{ + rndis_query_cmplt_type *resp; + rndis_resp_t *r; + + // DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID)); + if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP; + + /* + * we need more memory: + * oid_supported_list is the largest answer + */ + r = rndis_add_response (configNr, sizeof (oid_supported_list)); + + if (!r) return -ENOMEM; + resp = (rndis_query_cmplt_type *) r->buf; + + if (!resp) return -ENOMEM; + + resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT); + resp->MessageLength = __constant_cpu_to_le32 (24); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + + if (gen_ndis_query_resp (configNr, le32_to_cpu (buf->OID), r)) { + /* OID not supported */ + resp->Status = __constant_cpu_to_le32 ( + RNDIS_STATUS_NOT_SUPPORTED); + resp->InformationBufferLength = __constant_cpu_to_le32 (0); + resp->InformationBufferOffset = __constant_cpu_to_le32 (0); + } else + resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + + if (rndis_per_dev_params [configNr].ack) + rndis_per_dev_params [configNr].ack ( + rndis_per_dev_params [configNr].dev); + return 0; +} + +static int rndis_set_response (int configNr, rndis_set_msg_type *buf) +{ + u32 BufLength, BufOffset; + rndis_set_cmplt_type *resp; + rndis_resp_t *r; + + r = rndis_add_response (configNr, sizeof (rndis_set_cmplt_type)); + + if (!r) return -ENOMEM; + resp = (rndis_set_cmplt_type *) r->buf; + if (!resp) return -ENOMEM; + + BufLength = le32_to_cpu (buf->InformationBufferLength); + BufOffset = le32_to_cpu (buf->InformationBufferOffset); + +#ifdef VERBOSE + DEBUG("%s: Length: %d\n", __FUNCTION__, BufLength); + DEBUG("%s: Offset: %d\n", __FUNCTION__, BufOffset); + DEBUG("%s: InfoBuffer: ", __FUNCTION__); + + for (i = 0; i < BufLength; i++) { + DEBUG ("%02x ", *(((u8 *) buf) + i + 8 + BufOffset)); + } + + DEBUG ("\n"); +#endif + + resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_SET_CMPLT); + resp->MessageLength = __constant_cpu_to_le32 (16); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + if (gen_ndis_set_resp (configNr, le32_to_cpu (buf->OID), + ((u8 *) buf) + 8 + BufOffset, BufLength, r)) + resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED); + else resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + + if (rndis_per_dev_params [configNr].ack) + rndis_per_dev_params [configNr].ack ( + rndis_per_dev_params [configNr].dev); + + return 0; +} + +static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf) +{ + rndis_reset_cmplt_type *resp; + rndis_resp_t *r; + + r = rndis_add_response (configNr, sizeof (rndis_reset_cmplt_type)); + + if (!r) return -ENOMEM; + resp = (rndis_reset_cmplt_type *) r->buf; + if (!resp) return -ENOMEM; + + resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT); + resp->MessageLength = __constant_cpu_to_le32 (16); + resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + /* resent information */ + resp->AddressingReset = __constant_cpu_to_le32 (1); + + if (rndis_per_dev_params [configNr].ack) + rndis_per_dev_params [configNr].ack ( + rndis_per_dev_params [configNr].dev); + + return 0; +} + +static int rndis_keepalive_response (int configNr, + rndis_keepalive_msg_type *buf) +{ + rndis_keepalive_cmplt_type *resp; + rndis_resp_t *r; + + /* host "should" check only in RNDIS_DATA_INITIALIZED state */ + + r = rndis_add_response (configNr, sizeof (rndis_keepalive_cmplt_type)); + resp = (rndis_keepalive_cmplt_type *) r->buf; + if (!resp) return -ENOMEM; + + resp->MessageType = __constant_cpu_to_le32 ( + REMOTE_NDIS_KEEPALIVE_CMPLT); + resp->MessageLength = __constant_cpu_to_le32 (16); + resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + + if (rndis_per_dev_params [configNr].ack) + rndis_per_dev_params [configNr].ack ( + rndis_per_dev_params [configNr].dev); + + return 0; +} + + +/* + * Device to Host Comunication + */ +static int rndis_indicate_status_msg (int configNr, u32 status) +{ + rndis_indicate_status_msg_type *resp; + rndis_resp_t *r; + + if (rndis_per_dev_params [configNr].state == RNDIS_UNINITIALIZED) + return -ENOTSUPP; + + r = rndis_add_response (configNr, + sizeof (rndis_indicate_status_msg_type)); + if (!r) return -ENOMEM; + + resp = (rndis_indicate_status_msg_type *) r->buf; + if (!resp) return -ENOMEM; + + resp->MessageType = __constant_cpu_to_le32 ( + REMOTE_NDIS_INDICATE_STATUS_MSG); + resp->MessageLength = __constant_cpu_to_le32 (20); + resp->Status = cpu_to_le32 (status); + resp->StatusBufferLength = __constant_cpu_to_le32 (0); + resp->StatusBufferOffset = __constant_cpu_to_le32 (0); + + if (rndis_per_dev_params [configNr].ack) + rndis_per_dev_params [configNr].ack ( + rndis_per_dev_params [configNr].dev); + return 0; +} + +int rndis_signal_connect (int configNr) +{ + rndis_per_dev_params [configNr].media_state + = NDIS_MEDIA_STATE_CONNECTED; + return rndis_indicate_status_msg (configNr, + RNDIS_STATUS_MEDIA_CONNECT); +} + +int rndis_signal_disconnect (int configNr) +{ + rndis_per_dev_params [configNr].media_state + = NDIS_MEDIA_STATE_DISCONNECTED; + return rndis_indicate_status_msg (configNr, + RNDIS_STATUS_MEDIA_DISCONNECT); +} + +void rndis_set_host_mac (int configNr, const u8 *addr) +{ + rndis_per_dev_params [configNr].host_mac = addr; +} + +/* + * Message Parser + */ +int rndis_msg_parser (u8 configNr, u8 *buf) +{ + u32 MsgType, MsgLength; + __le32 *tmp; + struct rndis_params *params; + + if (!buf) + return -ENOMEM; + + tmp = (__le32 *) buf; + MsgType = le32_to_cpup(tmp++); + MsgLength = le32_to_cpup(tmp++); + + if (configNr >= RNDIS_MAX_CONFIGS) + return -ENOTSUPP; + params = &rndis_per_dev_params [configNr]; + + /* For USB: responses may take up to 10 seconds */ + switch (MsgType) + { + case REMOTE_NDIS_INITIALIZE_MSG: + DEBUG("%s: REMOTE_NDIS_INITIALIZE_MSG\n", + __FUNCTION__ ); + params->state = RNDIS_INITIALIZED; + return rndis_init_response (configNr, + (rndis_init_msg_type *) buf); + + case REMOTE_NDIS_HALT_MSG: + DEBUG("%s: REMOTE_NDIS_HALT_MSG\n", + __FUNCTION__ ); + params->state = RNDIS_UNINITIALIZED; + if (params->dev) { + netif_carrier_off (params->dev); + netif_stop_queue (params->dev); + } + return 0; + + case REMOTE_NDIS_QUERY_MSG: + return rndis_query_response (configNr, + (rndis_query_msg_type *) buf); + + case REMOTE_NDIS_SET_MSG: + return rndis_set_response (configNr, + (rndis_set_msg_type *) buf); + + case REMOTE_NDIS_RESET_MSG: + DEBUG("%s: REMOTE_NDIS_RESET_MSG\n", + __FUNCTION__ ); + return rndis_reset_response (configNr, + (rndis_reset_msg_type *) buf); + + case REMOTE_NDIS_KEEPALIVE_MSG: + /* For USB: host does this every 5 seconds */ +#ifdef VERBOSE + DEBUG("%s: REMOTE_NDIS_KEEPALIVE_MSG\n", + __FUNCTION__ ); +#endif + return rndis_keepalive_response (configNr, + (rndis_keepalive_msg_type *) + buf); + + default: + /* At least Windows XP emits some undefined RNDIS messages. + * In one case those messages seemed to relate to the host + * suspending itself. + */ + printk (KERN_WARNING + "%s: unknown RNDIS message 0x%08X len %d\n", + __FUNCTION__ , MsgType, MsgLength); + { + unsigned i; + for (i = 0; i < MsgLength; i += 16) { + DEBUG ("%03d: " + " %02x %02x %02x %02x" + " %02x %02x %02x %02x" + " %02x %02x %02x %02x" + " %02x %02x %02x %02x" + "\n", + i, + buf[i], buf [i+1], + buf[i+2], buf[i+3], + buf[i+4], buf [i+5], + buf[i+6], buf[i+7], + buf[i+8], buf [i+9], + buf[i+10], buf[i+11], + buf[i+12], buf [i+13], + buf[i+14], buf[i+15]); + } + } + break; + } + + return -ENOTSUPP; +} + +int rndis_register (int (* rndis_control_ack) (struct net_device *)) +{ + u8 i; + + for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { + if (!rndis_per_dev_params [i].used) { + rndis_per_dev_params [i].used = 1; + rndis_per_dev_params [i].ack = rndis_control_ack; + DEBUG("%s: configNr = %d\n", __FUNCTION__, i); + return i; + } + } + DEBUG("failed\n"); + + return -1; +} + +void rndis_deregister (int configNr) +{ + DEBUG("%s: \n", __FUNCTION__ ); + + if (configNr >= RNDIS_MAX_CONFIGS) return; + rndis_per_dev_params [configNr].used = 0; + + return; +} + +int rndis_set_param_dev (u8 configNr, struct net_device *dev, + struct net_device_stats *stats) +{ + DEBUG("%s:\n", __FUNCTION__ ); + if (!dev || !stats) return -1; + if (configNr >= RNDIS_MAX_CONFIGS) return -1; + + rndis_per_dev_params [configNr].dev = dev; + rndis_per_dev_params [configNr].stats = stats; + + return 0; +} + +int rndis_set_param_vendor (u8 configNr, u32 vendorID, const char *vendorDescr) +{ + DEBUG("%s:\n", __FUNCTION__ ); + if (!vendorDescr) return -1; + if (configNr >= RNDIS_MAX_CONFIGS) return -1; + + rndis_per_dev_params [configNr].vendorID = vendorID; + rndis_per_dev_params [configNr].vendorDescr = vendorDescr; + + return 0; +} + +int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed) +{ + DEBUG("%s:\n", __FUNCTION__ ); + if (configNr >= RNDIS_MAX_CONFIGS) return -1; + + rndis_per_dev_params [configNr].medium = medium; + rndis_per_dev_params [configNr].speed = speed; + + return 0; +} + +void rndis_add_hdr (struct sk_buff *skb) +{ + struct rndis_packet_msg_type *header; + + if (!skb) + return; + header = (void *) skb_push (skb, sizeof *header); + memset (header, 0, sizeof *header); + header->MessageType = __constant_cpu_to_le32 (1); + header->MessageLength = cpu_to_le32(skb->len); + header->DataOffset = __constant_cpu_to_le32 (36); + header->OOBDataOffset = cpu_to_le32(skb->len - 44); +} + +void rndis_free_response (int configNr, u8 *buf) +{ + rndis_resp_t *r; + struct list_head *act, *tmp; + + list_for_each_safe (act, tmp, + &(rndis_per_dev_params [configNr].resp_queue)) + { + r = list_entry (act, rndis_resp_t, list); + if (r && r->buf == buf) { + list_del (&r->list); + kfree (r); + } + } +} + +u8 *rndis_get_next_response (int configNr, u32 *length) +{ + rndis_resp_t *r; + struct list_head *act, *tmp; + + if (!length) return NULL; + + list_for_each_safe (act, tmp, + &(rndis_per_dev_params [configNr].resp_queue)) + { + r = list_entry (act, rndis_resp_t, list); + if (!r->send) { + r->send = 1; + *length = r->length; + return r->buf; + } + } + + return NULL; +} + +static rndis_resp_t *rndis_add_response (int configNr, u32 length) +{ + rndis_resp_t *r; + + r = kmalloc (sizeof (rndis_resp_t) + length, GFP_ATOMIC); + if (!r) return NULL; + + r->buf = (u8 *) (r + 1); + r->length = length; + r->send = 0; + + list_add_tail (&r->list, + &(rndis_per_dev_params [configNr].resp_queue)); + return r; +} + +int rndis_rm_hdr (u8 *buf, u32 *length) +{ + u32 i, messageLen, dataOffset; + __le32 *tmp; + + tmp = (__le32 *) buf; + + if (!buf || !length) return -1; + if (le32_to_cpup(tmp++) != 1) return -1; + + messageLen = le32_to_cpup(tmp++); + dataOffset = le32_to_cpup(tmp++) + 8; + + if (messageLen < dataOffset || messageLen > *length) return -1; + + for (i = dataOffset; i < messageLen; i++) + buf [i - dataOffset] = buf [i]; + + *length = messageLen - dataOffset; + + return 0; +} + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static int rndis_proc_read (char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + char *out = page; + int len; + rndis_params *param = (rndis_params *) data; + + out += snprintf (out, count, + "Config Nr. %d\n" + "used : %s\n" + "state : %s\n" + "medium : 0x%08X\n" + "speed : %d\n" + "cable : %s\n" + "vendor ID : 0x%08X\n" + "vendor : %s\n", + param->confignr, (param->used) ? "y" : "n", + ({ char *s = "?"; + switch (param->state) { + case RNDIS_UNINITIALIZED: + s = "RNDIS_UNINITIALIZED"; break; + case RNDIS_INITIALIZED: + s = "RNDIS_INITIALIZED"; break; + case RNDIS_DATA_INITIALIZED: + s = "RNDIS_DATA_INITIALIZED"; break; + }; s; }), + param->medium, + (param->media_state) ? 0 : param->speed*100, + (param->media_state) ? "disconnected" : "connected", + param->vendorID, param->vendorDescr); + + len = out - page; + len -= off; + + if (len < count) { + *eof = 1; + if (len <= 0) + return 0; + } else + len = count; + + *start = page + off; + return len; +} + +static int rndis_proc_write (struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + rndis_params *p = data; + u32 speed = 0; + int i, fl_speed = 0; + + for (i = 0; i < count; i++) { + char c; + if (get_user(c, buffer)) + return -EFAULT; + switch (c) { + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': + fl_speed = 1; + speed = speed*10 + c - '0'; + break; + case 'C': + case 'c': + rndis_signal_connect (p->confignr); + break; + case 'D': + case 'd': + rndis_signal_disconnect(p->confignr); + break; + default: + if (fl_speed) p->speed = speed; + else DEBUG ("%c is not valid\n", c); + break; + } + + buffer++; + } + + return count; +} + +#define NAME_TEMPLATE "driver/rndis-%03d" + +static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS]; + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + + +int __init rndis_init (void) +{ + u8 i; + + for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + char name [20]; + + sprintf (name, NAME_TEMPLATE, i); + if (!(rndis_connect_state [i] + = create_proc_entry (name, 0660, NULL))) + { + DEBUG ("%s :remove entries", __FUNCTION__); + while (i) { + sprintf (name, NAME_TEMPLATE, --i); + remove_proc_entry (name, NULL); + } + DEBUG ("\n"); + return -EIO; + } + + rndis_connect_state [i]->nlink = 1; + rndis_connect_state [i]->write_proc = rndis_proc_write; + rndis_connect_state [i]->read_proc = rndis_proc_read; + rndis_connect_state [i]->data = (void *) + (rndis_per_dev_params + i); +#endif + rndis_per_dev_params [i].confignr = i; + rndis_per_dev_params [i].used = 0; + rndis_per_dev_params [i].state = RNDIS_UNINITIALIZED; + rndis_per_dev_params [i].media_state + = NDIS_MEDIA_STATE_DISCONNECTED; + INIT_LIST_HEAD (&(rndis_per_dev_params [i].resp_queue)); + } + + return 0; +} + +void rndis_exit (void) +{ +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + u8 i; + char name [20]; + + for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { + sprintf (name, NAME_TEMPLATE, i); + remove_proc_entry (name, NULL); + } +#endif +} + diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h new file mode 100644 index 0000000..8225018 --- /dev/null +++ b/drivers/usb/gadget/rndis.h @@ -0,0 +1,348 @@ +/* + * RNDIS Definitions for Remote NDIS + * + * Version: $Id: rndis.h,v 1.15 2004/03/25 21:33:46 robert Exp $ + * + * Authors: Benedikt Spranger, Pengutronix + * Robert Schwebel, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, as published by the Free Software Foundation. + * + * This software was originally developed in conformance with + * Microsoft's Remote NDIS Specification License Agreement. + */ + +#ifndef _LINUX_RNDIS_H +#define _LINUX_RNDIS_H + +#include "ndis.h" + +#define RNDIS_MAXIMUM_FRAME_SIZE 1518 +#define RNDIS_MAX_TOTAL_SIZE 1558 + +/* Remote NDIS Versions */ +#define RNDIS_MAJOR_VERSION 1 +#define RNDIS_MINOR_VERSION 0 + +/* Status Values */ +#define RNDIS_STATUS_SUCCESS 0x00000000U /* Success */ +#define RNDIS_STATUS_FAILURE 0xC0000001U /* Unspecified error */ +#define RNDIS_STATUS_INVALID_DATA 0xC0010015U /* Invalid data */ +#define RNDIS_STATUS_NOT_SUPPORTED 0xC00000BBU /* Unsupported request */ +#define RNDIS_STATUS_MEDIA_CONNECT 0x4001000BU /* Device connected */ +#define RNDIS_STATUS_MEDIA_DISCONNECT 0x4001000CU /* Device disconnected */ +/* For all not specified status messages: + * RNDIS_STATUS_Xxx -> NDIS_STATUS_Xxx + */ + +/* Message Set for Connectionless (802.3) Devices */ +#define REMOTE_NDIS_INITIALIZE_MSG 0x00000002U /* Initialize device */ +#define REMOTE_NDIS_HALT_MSG 0x00000003U +#define REMOTE_NDIS_QUERY_MSG 0x00000004U +#define REMOTE_NDIS_SET_MSG 0x00000005U +#define REMOTE_NDIS_RESET_MSG 0x00000006U +#define REMOTE_NDIS_INDICATE_STATUS_MSG 0x00000007U +#define REMOTE_NDIS_KEEPALIVE_MSG 0x00000008U + +/* Message completion */ +#define REMOTE_NDIS_INITIALIZE_CMPLT 0x80000002U +#define REMOTE_NDIS_QUERY_CMPLT 0x80000004U +#define REMOTE_NDIS_SET_CMPLT 0x80000005U +#define REMOTE_NDIS_RESET_CMPLT 0x80000006U +#define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008U + +/* Device Flags */ +#define RNDIS_DF_CONNECTIONLESS 0x00000001U +#define RNDIS_DF_CONNECTION_ORIENTED 0x00000002U + +#define RNDIS_MEDIUM_802_3 0x00000000U + +/* from drivers/net/sk98lin/h/skgepnmi.h */ +#define OID_PNP_CAPABILITIES 0xFD010100 +#define OID_PNP_SET_POWER 0xFD010101 +#define OID_PNP_QUERY_POWER 0xFD010102 +#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 +#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104 +#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 + + +/* supported OIDs */ +static const u32 oid_supported_list [] = +{ + /* the general stuff */ + OID_GEN_SUPPORTED_LIST, + OID_GEN_HARDWARE_STATUS, + OID_GEN_MEDIA_SUPPORTED, + OID_GEN_MEDIA_IN_USE, + OID_GEN_MAXIMUM_FRAME_SIZE, + OID_GEN_LINK_SPEED, + OID_GEN_TRANSMIT_BLOCK_SIZE, + OID_GEN_RECEIVE_BLOCK_SIZE, + OID_GEN_VENDOR_ID, + OID_GEN_VENDOR_DESCRIPTION, + OID_GEN_VENDOR_DRIVER_VERSION, + OID_GEN_CURRENT_PACKET_FILTER, + OID_GEN_MAXIMUM_TOTAL_SIZE, + OID_GEN_MEDIA_CONNECT_STATUS, + OID_GEN_PHYSICAL_MEDIUM, +#if 0 + OID_GEN_RNDIS_CONFIG_PARAMETER, +#endif + + /* the statistical stuff */ + OID_GEN_XMIT_OK, + OID_GEN_RCV_OK, + OID_GEN_XMIT_ERROR, + OID_GEN_RCV_ERROR, + OID_GEN_RCV_NO_BUFFER, +#ifdef RNDIS_OPTIONAL_STATS + OID_GEN_DIRECTED_BYTES_XMIT, + OID_GEN_DIRECTED_FRAMES_XMIT, + OID_GEN_MULTICAST_BYTES_XMIT, + OID_GEN_MULTICAST_FRAMES_XMIT, + OID_GEN_BROADCAST_BYTES_XMIT, + OID_GEN_BROADCAST_FRAMES_XMIT, + OID_GEN_DIRECTED_BYTES_RCV, + OID_GEN_DIRECTED_FRAMES_RCV, + OID_GEN_MULTICAST_BYTES_RCV, + OID_GEN_MULTICAST_FRAMES_RCV, + OID_GEN_BROADCAST_BYTES_RCV, + OID_GEN_BROADCAST_FRAMES_RCV, + OID_GEN_RCV_CRC_ERROR, + OID_GEN_TRANSMIT_QUEUE_LENGTH, +#endif /* RNDIS_OPTIONAL_STATS */ + + /* mandatory 802.3 */ + /* the general stuff */ + OID_802_3_PERMANENT_ADDRESS, + OID_802_3_CURRENT_ADDRESS, + OID_802_3_MULTICAST_LIST, + OID_802_3_MAC_OPTIONS, + OID_802_3_MAXIMUM_LIST_SIZE, + + /* the statistical stuff */ + OID_802_3_RCV_ERROR_ALIGNMENT, + OID_802_3_XMIT_ONE_COLLISION, + OID_802_3_XMIT_MORE_COLLISIONS, +#ifdef RNDIS_OPTIONAL_STATS + OID_802_3_XMIT_DEFERRED, + OID_802_3_XMIT_MAX_COLLISIONS, + OID_802_3_RCV_OVERRUN, + OID_802_3_XMIT_UNDERRUN, + OID_802_3_XMIT_HEARTBEAT_FAILURE, + OID_802_3_XMIT_TIMES_CRS_LOST, + OID_802_3_XMIT_LATE_COLLISIONS, +#endif /* RNDIS_OPTIONAL_STATS */ + +#ifdef RNDIS_PM + /* PM and wakeup are mandatory for USB: */ + + /* power management */ + OID_PNP_CAPABILITIES, + OID_PNP_QUERY_POWER, + OID_PNP_SET_POWER, + + /* wake up host */ + OID_PNP_ENABLE_WAKE_UP, + OID_PNP_ADD_WAKE_UP_PATTERN, + OID_PNP_REMOVE_WAKE_UP_PATTERN, +#endif +}; + + +typedef struct rndis_init_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 MajorVersion; + __le32 MinorVersion; + __le32 MaxTransferSize; +} rndis_init_msg_type; + +typedef struct rndis_init_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; + __le32 MajorVersion; + __le32 MinorVersion; + __le32 DeviceFlags; + __le32 Medium; + __le32 MaxPacketsPerTransfer; + __le32 MaxTransferSize; + __le32 PacketAlignmentFactor; + __le32 AFListOffset; + __le32 AFListSize; +} rndis_init_cmplt_type; + +typedef struct rndis_halt_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; +} rndis_halt_msg_type; + +typedef struct rndis_query_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 OID; + __le32 InformationBufferLength; + __le32 InformationBufferOffset; + __le32 DeviceVcHandle; +} rndis_query_msg_type; + +typedef struct rndis_query_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; + __le32 InformationBufferLength; + __le32 InformationBufferOffset; +} rndis_query_cmplt_type; + +typedef struct rndis_set_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 OID; + __le32 InformationBufferLength; + __le32 InformationBufferOffset; + __le32 DeviceVcHandle; +} rndis_set_msg_type; + +typedef struct rndis_set_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; +} rndis_set_cmplt_type; + +typedef struct rndis_reset_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 Reserved; +} rndis_reset_msg_type; + +typedef struct rndis_reset_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 Status; + __le32 AddressingReset; +} rndis_reset_cmplt_type; + +typedef struct rndis_indicate_status_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 Status; + __le32 StatusBufferLength; + __le32 StatusBufferOffset; +} rndis_indicate_status_msg_type; + +typedef struct rndis_keepalive_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; +} rndis_keepalive_msg_type; + +typedef struct rndis_keepalive_cmplt_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 RequestID; + __le32 Status; +} rndis_keepalive_cmplt_type; + +struct rndis_packet_msg_type +{ + __le32 MessageType; + __le32 MessageLength; + __le32 DataOffset; + __le32 DataLength; + __le32 OOBDataOffset; + __le32 OOBDataLength; + __le32 NumOOBDataElements; + __le32 PerPacketInfoOffset; + __le32 PerPacketInfoLength; + __le32 VcHandle; + __le32 Reserved; +}; + +struct rndis_config_parameter +{ + __le32 ParameterNameOffset; + __le32 ParameterNameLength; + __le32 ParameterType; + __le32 ParameterValueOffset; + __le32 ParameterValueLength; +}; + +/* implementation specific */ +enum rndis_state +{ + RNDIS_UNINITIALIZED, + RNDIS_INITIALIZED, + RNDIS_DATA_INITIALIZED, +}; + +typedef struct rndis_resp_t +{ + struct list_head list; + u8 *buf; + u32 length; + int send; +} rndis_resp_t; + +typedef struct rndis_params +{ + u8 confignr; + int used; + enum rndis_state state; + u32 filter; + u32 medium; + u32 speed; + u32 media_state; + const u8 *host_mac; + struct net_device *dev; + struct net_device_stats *stats; + u32 vendorID; + const char *vendorDescr; + int (*ack) (struct net_device *); + struct list_head resp_queue; +} rndis_params; + +/* RNDIS Message parser and other useless functions */ +int rndis_msg_parser (u8 configNr, u8 *buf); +int rndis_register (int (*rndis_control_ack) (struct net_device *)); +void rndis_deregister (int configNr); +int rndis_set_param_dev (u8 configNr, struct net_device *dev, + struct net_device_stats *stats); +int rndis_set_param_vendor (u8 configNr, u32 vendorID, + const char *vendorDescr); +int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed); +void rndis_add_hdr (struct sk_buff *skb); +int rndis_rm_hdr (u8 *buf, u32 *length); +u8 *rndis_get_next_response (int configNr, u32 *length); +void rndis_free_response (int configNr, u8 *buf); + +int rndis_signal_connect (int configNr); +int rndis_signal_disconnect (int configNr); +int rndis_state (int configNr); +extern void rndis_set_host_mac (int configNr, const u8 *addr); + +int __init rndis_init (void); +void rndis_exit (void); + +#endif /* _LINUX_RNDIS_H */ diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c new file mode 100644 index 0000000..2af3f78 --- /dev/null +++ b/drivers/usb/gadget/serial.c @@ -0,0 +1,2436 @@ +/* + * g_serial.c -- USB gadget serial driver + * + * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com) + * + * This code is based in part on the Gadget Zero driver, which + * is Copyright (C) 2003 by David Brownell, all rights reserved. + * + * This code also borrows from usbserial.c, which is + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2000 Peter Berger (pberger@brimson.com) + * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * either version 2 of that License or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/utsname.h> +#include <linux/wait.h> +#include <linux/proc_fs.h> +#include <linux/device.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> +#include <asm/uaccess.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_cdc.h> +#include <linux/usb_gadget.h> + +#include "gadget_chips.h" + + +/* Wait Cond */ + +#define __wait_cond_interruptible(wq, condition, lock, flags, ret) \ +do { \ + wait_queue_t __wait; \ + init_waitqueue_entry(&__wait, current); \ + \ + add_wait_queue(&wq, &__wait); \ + for (;;) { \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + spin_unlock_irqrestore(lock, flags); \ + schedule(); \ + spin_lock_irqsave(lock, flags); \ + continue; \ + } \ + ret = -ERESTARTSYS; \ + break; \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&wq, &__wait); \ +} while (0) + +#define wait_cond_interruptible(wq, condition, lock, flags) \ +({ \ + int __ret = 0; \ + if (!(condition)) \ + __wait_cond_interruptible(wq, condition, lock, flags, \ + __ret); \ + __ret; \ +}) + +#define __wait_cond_interruptible_timeout(wq, condition, lock, flags, \ + timeout, ret) \ +do { \ + signed long __timeout = timeout; \ + wait_queue_t __wait; \ + init_waitqueue_entry(&__wait, current); \ + \ + add_wait_queue(&wq, &__wait); \ + for (;;) { \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (__timeout == 0) \ + break; \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + spin_unlock_irqrestore(lock, flags); \ + __timeout = schedule_timeout(__timeout); \ + spin_lock_irqsave(lock, flags); \ + continue; \ + } \ + ret = -ERESTARTSYS; \ + break; \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&wq, &__wait); \ +} while (0) + +#define wait_cond_interruptible_timeout(wq, condition, lock, flags, \ + timeout) \ +({ \ + int __ret = 0; \ + if (!(condition)) \ + __wait_cond_interruptible_timeout(wq, condition, lock, \ + flags, timeout, __ret); \ + __ret; \ +}) + + +/* Defines */ + +#define GS_VERSION_STR "v2.0" +#define GS_VERSION_NUM 0x0200 + +#define GS_LONG_NAME "Gadget Serial" +#define GS_SHORT_NAME "g_serial" + +#define GS_MAJOR 127 +#define GS_MINOR_START 0 + +#define GS_NUM_PORTS 16 + +#define GS_NUM_CONFIGS 1 +#define GS_NO_CONFIG_ID 0 +#define GS_BULK_CONFIG_ID 1 +#define GS_ACM_CONFIG_ID 2 + +#define GS_MAX_NUM_INTERFACES 2 +#define GS_BULK_INTERFACE_ID 0 +#define GS_CONTROL_INTERFACE_ID 0 +#define GS_DATA_INTERFACE_ID 1 + +#define GS_MAX_DESC_LEN 256 + +#define GS_DEFAULT_READ_Q_SIZE 32 +#define GS_DEFAULT_WRITE_Q_SIZE 32 + +#define GS_DEFAULT_WRITE_BUF_SIZE 8192 +#define GS_TMP_BUF_SIZE 8192 + +#define GS_CLOSE_TIMEOUT 15 + +#define GS_DEFAULT_USE_ACM 0 + +#define GS_DEFAULT_DTE_RATE 9600 +#define GS_DEFAULT_DATA_BITS 8 +#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY +#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS + +/* select highspeed/fullspeed, hiding highspeed if not configured */ +#ifdef CONFIG_USB_GADGET_DUALSPEED +#define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs)) +#else +#define GS_SPEED_SELECT(is_hs,hs,fs) (fs) +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + +/* debug settings */ +#ifdef GS_DEBUG +static int debug = 1; + +#define gs_debug(format, arg...) \ + do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0) +#define gs_debug_level(level, format, arg...) \ + do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0) + +#else + +#define gs_debug(format, arg...) \ + do { } while(0) +#define gs_debug_level(level, format, arg...) \ + do { } while(0) + +#endif /* GS_DEBUG */ + +/* Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#define GS_VENDOR_ID 0x0525 /* NetChip */ +#define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */ +#define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */ + +#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ +#define GS_NOTIFY_MAXPACKET 8 + + +/* Structures */ + +struct gs_dev; + +/* circular buffer */ +struct gs_buf { + unsigned int buf_size; + char *buf_buf; + char *buf_get; + char *buf_put; +}; + +/* list of requests */ +struct gs_req_entry { + struct list_head re_entry; + struct usb_request *re_req; +}; + +/* the port structure holds info for each port, one for each minor number */ +struct gs_port { + struct gs_dev *port_dev; /* pointer to device struct */ + struct tty_struct *port_tty; /* pointer to tty struct */ + spinlock_t port_lock; + int port_num; + int port_open_count; + int port_in_use; /* open/close in progress */ + wait_queue_head_t port_write_wait;/* waiting to write */ + struct gs_buf *port_write_buf; + struct usb_cdc_line_coding port_line_coding; +}; + +/* the device structure holds info for the USB device */ +struct gs_dev { + struct usb_gadget *dev_gadget; /* gadget device pointer */ + spinlock_t dev_lock; /* lock for set/reset config */ + int dev_config; /* configuration number */ + struct usb_ep *dev_notify_ep; /* address of notify endpoint */ + struct usb_ep *dev_in_ep; /* address of in endpoint */ + struct usb_ep *dev_out_ep; /* address of out endpoint */ + struct usb_endpoint_descriptor /* desciptor of notify ep */ + *dev_notify_ep_desc; + struct usb_endpoint_descriptor /* descriptor of in endpoint */ + *dev_in_ep_desc; + struct usb_endpoint_descriptor /* descriptor of out endpoint */ + *dev_out_ep_desc; + struct usb_request *dev_ctrl_req; /* control request */ + struct list_head dev_req_list; /* list of write requests */ + int dev_sched_port; /* round robin port scheduled */ + struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */ +}; + + +/* Functions */ + +/* module */ +static int __init gs_module_init(void); +static void __exit gs_module_exit(void); + +/* tty driver */ +static int gs_open(struct tty_struct *tty, struct file *file); +static void gs_close(struct tty_struct *tty, struct file *file); +static int gs_write(struct tty_struct *tty, + const unsigned char *buf, int count); +static void gs_put_char(struct tty_struct *tty, unsigned char ch); +static void gs_flush_chars(struct tty_struct *tty); +static int gs_write_room(struct tty_struct *tty); +static int gs_chars_in_buffer(struct tty_struct *tty); +static void gs_throttle(struct tty_struct * tty); +static void gs_unthrottle(struct tty_struct * tty); +static void gs_break(struct tty_struct *tty, int break_state); +static int gs_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void gs_set_termios(struct tty_struct *tty, struct termios *old); + +static int gs_send(struct gs_dev *dev); +static int gs_send_packet(struct gs_dev *dev, char *packet, + unsigned int size); +static int gs_recv_packet(struct gs_dev *dev, char *packet, + unsigned int size); +static void gs_read_complete(struct usb_ep *ep, struct usb_request *req); +static void gs_write_complete(struct usb_ep *ep, struct usb_request *req); + +/* gadget driver */ +static int gs_bind(struct usb_gadget *gadget); +static void gs_unbind(struct usb_gadget *gadget); +static int gs_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl); +static int gs_setup_standard(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl); +static int gs_setup_class(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl); +static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req); +static void gs_disconnect(struct usb_gadget *gadget); +static int gs_set_config(struct gs_dev *dev, unsigned config); +static void gs_reset_config(struct gs_dev *dev); +static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, + u8 type, unsigned int index, int is_otg); + +static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, + int kmalloc_flags); +static void gs_free_req(struct usb_ep *ep, struct usb_request *req); + +static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, + int kmalloc_flags); +static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req); + +static int gs_alloc_ports(struct gs_dev *dev, int kmalloc_flags); +static void gs_free_ports(struct gs_dev *dev); + +/* circular buffer */ +static struct gs_buf *gs_buf_alloc(unsigned int size, int kmalloc_flags); +static void gs_buf_free(struct gs_buf *gb); +static void gs_buf_clear(struct gs_buf *gb); +static unsigned int gs_buf_data_avail(struct gs_buf *gb); +static unsigned int gs_buf_space_avail(struct gs_buf *gb); +static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, + unsigned int count); +static unsigned int gs_buf_get(struct gs_buf *gb, char *buf, + unsigned int count); + +/* external functions */ +extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode); + + +/* Globals */ + +static struct gs_dev *gs_device; + +static const char *EP_IN_NAME; +static const char *EP_OUT_NAME; +static const char *EP_NOTIFY_NAME; + +static struct semaphore gs_open_close_sem[GS_NUM_PORTS]; + +static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE; +static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE; + +static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE; + +static unsigned int use_acm = GS_DEFAULT_USE_ACM; + + +/* tty driver struct */ +static struct tty_operations gs_tty_ops = { + .open = gs_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .ioctl = gs_ioctl, + .set_termios = gs_set_termios, + .throttle = gs_throttle, + .unthrottle = gs_unthrottle, + .break_ctl = gs_break, + .chars_in_buffer = gs_chars_in_buffer, +}; +static struct tty_driver *gs_tty_driver; + +/* gadget driver struct */ +static struct usb_gadget_driver gs_gadget_driver = { +#ifdef CONFIG_USB_GADGET_DUALSPEED + .speed = USB_SPEED_HIGH, +#else + .speed = USB_SPEED_FULL, +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + .function = GS_LONG_NAME, + .bind = gs_bind, + .unbind = gs_unbind, + .setup = gs_setup, + .disconnect = gs_disconnect, + .driver = { + .name = GS_SHORT_NAME, + /* .shutdown = ... */ + /* .suspend = ... */ + /* .resume = ... */ + }, +}; + + +/* USB descriptors */ + +#define GS_MANUFACTURER_STR_ID 1 +#define GS_PRODUCT_STR_ID 2 +#define GS_SERIAL_STR_ID 3 +#define GS_BULK_CONFIG_STR_ID 4 +#define GS_ACM_CONFIG_STR_ID 5 +#define GS_CONTROL_STR_ID 6 +#define GS_DATA_STR_ID 7 + +/* static strings, in UTF-8 */ +static char manufacturer[50]; +static struct usb_string gs_strings[] = { + { GS_MANUFACTURER_STR_ID, manufacturer }, + { GS_PRODUCT_STR_ID, GS_LONG_NAME }, + { GS_SERIAL_STR_ID, "0" }, + { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" }, + { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" }, + { GS_CONTROL_STR_ID, "Gadget Serial Control" }, + { GS_DATA_STR_ID, "Gadget Serial Data" }, + { } /* end of list */ +}; + +static struct usb_gadget_strings gs_string_table = { + .language = 0x0409, /* en-us */ + .strings = gs_strings, +}; + +static struct usb_device_descriptor gs_device_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID), + .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID), + .iManufacturer = GS_MANUFACTURER_STR_ID, + .iProduct = GS_PRODUCT_STR_ID, + .iSerialNumber = GS_SERIAL_STR_ID, + .bNumConfigurations = GS_NUM_CONFIGS, +}; + +static struct usb_otg_descriptor gs_otg_descriptor = { + .bLength = sizeof(gs_otg_descriptor), + .bDescriptorType = USB_DT_OTG, + .bmAttributes = USB_OTG_SRP, +}; + +static struct usb_config_descriptor gs_bulk_config_desc = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + /* .wTotalLength computed dynamically */ + .bNumInterfaces = 1, + .bConfigurationValue = GS_BULK_CONFIG_ID, + .iConfiguration = GS_BULK_CONFIG_STR_ID, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 1, +}; + +static struct usb_config_descriptor gs_acm_config_desc = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + /* .wTotalLength computed dynamically */ + .bNumInterfaces = 2, + .bConfigurationValue = GS_ACM_CONFIG_ID, + .iConfiguration = GS_ACM_CONFIG_STR_ID, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 1, +}; + +static const struct usb_interface_descriptor gs_bulk_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GS_BULK_INTERFACE_ID, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = GS_DATA_STR_ID, +}; + +static const struct usb_interface_descriptor gs_control_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GS_CONTROL_INTERFACE_ID, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, + .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER, + .iInterface = GS_CONTROL_STR_ID, +}; + +static const struct usb_interface_descriptor gs_data_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GS_DATA_INTERFACE_ID, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = GS_DATA_STR_ID, +}; + +static const struct usb_cdc_header_desc gs_header_desc = { + .bLength = sizeof(gs_header_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_HEADER_TYPE, + .bcdCDC = __constant_cpu_to_le16(0x0110), +}; + +static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = { + .bLength = sizeof(gs_call_mgmt_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, + .bmCapabilities = 0, + .bDataInterface = 1, /* index of data interface */ +}; + +static struct usb_cdc_acm_descriptor gs_acm_descriptor = { + .bLength = sizeof(gs_acm_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_ACM_TYPE, + .bmCapabilities = 0, +}; + +static const struct usb_cdc_union_desc gs_union_desc = { + .bLength = sizeof(gs_union_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_UNION_TYPE, + .bMasterInterface0 = 0, /* index of control interface */ + .bSlaveInterface0 = 1, /* index of data interface */ +}; + +static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), + .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, +}; + +static struct usb_endpoint_descriptor gs_fullspeed_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor gs_fullspeed_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_bulk_interface_desc, + (struct usb_descriptor_header *) &gs_fullspeed_in_desc, + (struct usb_descriptor_header *) &gs_fullspeed_out_desc, + NULL, +}; + +static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_control_interface_desc, + (struct usb_descriptor_header *) &gs_header_desc, + (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, + (struct usb_descriptor_header *) &gs_acm_descriptor, + (struct usb_descriptor_header *) &gs_union_desc, + (struct usb_descriptor_header *) &gs_fullspeed_notify_desc, + (struct usb_descriptor_header *) &gs_data_interface_desc, + (struct usb_descriptor_header *) &gs_fullspeed_in_desc, + (struct usb_descriptor_header *) &gs_fullspeed_out_desc, + NULL, +}; + +#ifdef CONFIG_USB_GADGET_DUALSPEED +static struct usb_endpoint_descriptor gs_highspeed_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), + .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, +}; + +static struct usb_endpoint_descriptor gs_highspeed_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor gs_highspeed_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_qualifier_descriptor gs_qualifier_desc = { + .bLength = sizeof(struct usb_qualifier_descriptor), + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + .bcdUSB = __constant_cpu_to_le16 (0x0200), + /* assumes ep0 uses the same value for both speeds ... */ + .bNumConfigurations = GS_NUM_CONFIGS, +}; + +static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_bulk_interface_desc, + (struct usb_descriptor_header *) &gs_highspeed_in_desc, + (struct usb_descriptor_header *) &gs_highspeed_out_desc, + NULL, +}; + +static const struct usb_descriptor_header *gs_acm_highspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_control_interface_desc, + (struct usb_descriptor_header *) &gs_header_desc, + (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, + (struct usb_descriptor_header *) &gs_acm_descriptor, + (struct usb_descriptor_header *) &gs_union_desc, + (struct usb_descriptor_header *) &gs_highspeed_notify_desc, + (struct usb_descriptor_header *) &gs_data_interface_desc, + (struct usb_descriptor_header *) &gs_highspeed_in_desc, + (struct usb_descriptor_header *) &gs_highspeed_out_desc, + NULL, +}; + +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + + +/* Module */ +MODULE_DESCRIPTION(GS_LONG_NAME); +MODULE_AUTHOR("Al Borchers"); +MODULE_LICENSE("GPL"); + +#ifdef GS_DEBUG +module_param(debug, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on"); +#endif + +module_param(read_q_size, uint, S_IRUGO); +MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32"); + +module_param(write_q_size, uint, S_IRUGO); +MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32"); + +module_param(write_buf_size, uint, S_IRUGO); +MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192"); + +module_param(use_acm, uint, S_IRUGO); +MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no"); + +module_init(gs_module_init); +module_exit(gs_module_exit); + +/* +* gs_module_init +* +* Register as a USB gadget driver and a tty driver. +*/ +static int __init gs_module_init(void) +{ + int i; + int retval; + + retval = usb_gadget_register_driver(&gs_gadget_driver); + if (retval) { + printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval); + return retval; + } + + gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS); + if (!gs_tty_driver) + return -ENOMEM; + gs_tty_driver->owner = THIS_MODULE; + gs_tty_driver->driver_name = GS_SHORT_NAME; + gs_tty_driver->name = "ttygs"; + gs_tty_driver->devfs_name = "usb/ttygs/"; + gs_tty_driver->major = GS_MAJOR; + gs_tty_driver->minor_start = GS_MINOR_START; + gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; + gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + gs_tty_driver->init_termios = tty_std_termios; + gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty_set_operations(gs_tty_driver, &gs_tty_ops); + + for (i=0; i < GS_NUM_PORTS; i++) + sema_init(&gs_open_close_sem[i], 1); + + retval = tty_register_driver(gs_tty_driver); + if (retval) { + usb_gadget_unregister_driver(&gs_gadget_driver); + put_tty_driver(gs_tty_driver); + printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval); + return retval; + } + + printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR); + return 0; +} + +/* +* gs_module_exit +* +* Unregister as a tty driver and a USB gadget driver. +*/ +static void __exit gs_module_exit(void) +{ + tty_unregister_driver(gs_tty_driver); + put_tty_driver(gs_tty_driver); + usb_gadget_unregister_driver(&gs_gadget_driver); + + printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR); +} + +/* TTY Driver */ + +/* + * gs_open + */ +static int gs_open(struct tty_struct *tty, struct file *file) +{ + int port_num; + unsigned long flags; + struct gs_port *port; + struct gs_dev *dev; + struct gs_buf *buf; + struct semaphore *sem; + int ret; + + port_num = tty->index; + + gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file); + + if (port_num < 0 || port_num >= GS_NUM_PORTS) { + printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n", + port_num, tty, file); + return -ENODEV; + } + + dev = gs_device; + + if (dev == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n", + port_num, tty, file); + return -ENODEV; + } + + sem = &gs_open_close_sem[port_num]; + if (down_interruptible(sem)) { + printk(KERN_ERR + "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n", + port_num, tty, file); + return -ERESTARTSYS; + } + + spin_lock_irqsave(&dev->dev_lock, flags); + + if (dev->dev_config == GS_NO_CONFIG_ID) { + printk(KERN_ERR + "gs_open: (%d,%p,%p) device is not connected\n", + port_num, tty, file); + ret = -ENODEV; + goto exit_unlock_dev; + } + + port = dev->dev_port[port_num]; + + if (port == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n", + port_num, tty, file); + ret = -ENODEV; + goto exit_unlock_dev; + } + + spin_lock(&port->port_lock); + spin_unlock(&dev->dev_lock); + + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n", + port_num, tty, file); + ret = -EIO; + goto exit_unlock_port; + } + + if (port->port_open_count > 0) { + ++port->port_open_count; + gs_debug("gs_open: (%d,%p,%p) already open\n", + port_num, tty, file); + ret = 0; + goto exit_unlock_port; + } + + tty->driver_data = NULL; + + /* mark port as in use, we can drop port lock and sleep if necessary */ + port->port_in_use = 1; + + /* allocate write buffer on first open */ + if (port->port_write_buf == NULL) { + spin_unlock_irqrestore(&port->port_lock, flags); + buf = gs_buf_alloc(write_buf_size, GFP_KERNEL); + spin_lock_irqsave(&port->port_lock, flags); + + /* might have been disconnected while asleep, check */ + if (port->port_dev == NULL) { + printk(KERN_ERR + "gs_open: (%d,%p,%p) port disconnected (2)\n", + port_num, tty, file); + port->port_in_use = 0; + ret = -EIO; + goto exit_unlock_port; + } + + if ((port->port_write_buf=buf) == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n", + port_num, tty, file); + port->port_in_use = 0; + ret = -ENOMEM; + goto exit_unlock_port; + } + + } + + /* wait for carrier detect (not implemented) */ + + /* might have been disconnected while asleep, check */ + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n", + port_num, tty, file); + port->port_in_use = 0; + ret = -EIO; + goto exit_unlock_port; + } + + tty->driver_data = port; + port->port_tty = tty; + port->port_open_count = 1; + port->port_in_use = 0; + + gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file); + + ret = 0; + +exit_unlock_port: + spin_unlock_irqrestore(&port->port_lock, flags); + up(sem); + return ret; + +exit_unlock_dev: + spin_unlock_irqrestore(&dev->dev_lock, flags); + up(sem); + return ret; + +} + +/* + * gs_close + */ +static void gs_close(struct tty_struct *tty, struct file *file) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + struct semaphore *sem; + + if (port == NULL) { + printk(KERN_ERR "gs_close: NULL port pointer\n"); + return; + } + + gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file); + + sem = &gs_open_close_sem[port->port_num]; + down(sem); + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_open_count == 0) { + printk(KERN_ERR + "gs_close: (%d,%p,%p) port is already closed\n", + port->port_num, tty, file); + goto exit; + } + + if (port->port_open_count > 1) { + --port->port_open_count; + goto exit; + } + + /* free disconnected port on final close */ + if (port->port_dev == NULL) { + kfree(port); + goto exit; + } + + /* mark port as closed but in use, we can drop port lock */ + /* and sleep if necessary */ + port->port_in_use = 1; + port->port_open_count = 0; + + /* wait for write buffer to drain, or */ + /* at most GS_CLOSE_TIMEOUT seconds */ + if (gs_buf_data_avail(port->port_write_buf) > 0) { + wait_cond_interruptible_timeout(port->port_write_wait, + port->port_dev == NULL + || gs_buf_data_avail(port->port_write_buf) == 0, + &port->port_lock, flags, GS_CLOSE_TIMEOUT * HZ); + } + + /* free disconnected port on final close */ + /* (might have happened during the above sleep) */ + if (port->port_dev == NULL) { + kfree(port); + goto exit; + } + + gs_buf_clear(port->port_write_buf); + + tty->driver_data = NULL; + port->port_tty = NULL; + port->port_in_use = 0; + + gs_debug("gs_close: (%d,%p,%p) completed\n", + port->port_num, tty, file); + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); + up(sem); +} + +/* + * gs_write + */ +static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + int ret; + + if (port == NULL) { + printk(KERN_ERR "gs_write: NULL port pointer\n"); + return -EIO; + } + + gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty, + count); + + if (count == 0) + return 0; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n", + port->port_num, tty); + ret = -EIO; + goto exit; + } + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_write: (%d,%p) port is closed\n", + port->port_num, tty); + ret = -EBADF; + goto exit; + } + + count = gs_buf_put(port->port_write_buf, buf, count); + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_send(gs_device); + + gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty, + count); + + return count; + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); + return ret; +} + +/* + * gs_put_char + */ +static void gs_put_char(struct tty_struct *tty, unsigned char ch) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + + if (port == NULL) { + printk(KERN_ERR "gs_put_char: NULL port pointer\n"); + return; + } + + gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2)); + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n", + port->port_num, tty); + goto exit; + } + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n", + port->port_num, tty); + goto exit; + } + + gs_buf_put(port->port_write_buf, &ch, 1); + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); +} + +/* + * gs_flush_chars + */ +static void gs_flush_chars(struct tty_struct *tty) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + + if (port == NULL) { + printk(KERN_ERR "gs_flush_chars: NULL port pointer\n"); + return; + } + + gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev == NULL) { + printk(KERN_ERR + "gs_flush_chars: (%d,%p) port is not connected\n", + port->port_num, tty); + goto exit; + } + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n", + port->port_num, tty); + goto exit; + } + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_send(gs_device); + + return; + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); +} + +/* + * gs_write_room + */ +static int gs_write_room(struct tty_struct *tty) +{ + + int room = 0; + unsigned long flags; + struct gs_port *port = tty->driver_data; + + + if (port == NULL) + return 0; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev != NULL && port->port_open_count > 0 + && port->port_write_buf != NULL) + room = gs_buf_space_avail(port->port_write_buf); + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_debug("gs_write_room: (%d,%p) room=%d\n", + port->port_num, tty, room); + + return room; +} + +/* + * gs_chars_in_buffer + */ +static int gs_chars_in_buffer(struct tty_struct *tty) +{ + int chars = 0; + unsigned long flags; + struct gs_port *port = tty->driver_data; + + if (port == NULL) + return 0; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev != NULL && port->port_open_count > 0 + && port->port_write_buf != NULL) + chars = gs_buf_data_avail(port->port_write_buf); + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n", + port->port_num, tty, chars); + + return chars; +} + +/* + * gs_throttle + */ +static void gs_throttle(struct tty_struct *tty) +{ +} + +/* + * gs_unthrottle + */ +static void gs_unthrottle(struct tty_struct *tty) +{ +} + +/* + * gs_break + */ +static void gs_break(struct tty_struct *tty, int break_state) +{ +} + +/* + * gs_ioctl + */ +static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +{ + struct gs_port *port = tty->driver_data; + + if (port == NULL) { + printk(KERN_ERR "gs_ioctl: NULL port pointer\n"); + return -EIO; + } + + gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n", + port->port_num, tty, file, cmd, arg); + + /* handle ioctls */ + + /* could not handle ioctl */ + return -ENOIOCTLCMD; +} + +/* + * gs_set_termios + */ +static void gs_set_termios(struct tty_struct *tty, struct termios *old) +{ +} + +/* +* gs_send +* +* This function finds available write requests, calls +* gs_send_packet to fill these packets with data, and +* continues until either there are no more write requests +* available or no more data to send. This function is +* run whenever data arrives or write requests are available. +*/ +static int gs_send(struct gs_dev *dev) +{ + int ret,len; + unsigned long flags; + struct usb_ep *ep; + struct usb_request *req; + struct gs_req_entry *req_entry; + + if (dev == NULL) { + printk(KERN_ERR "gs_send: NULL device pointer\n"); + return -ENODEV; + } + + spin_lock_irqsave(&dev->dev_lock, flags); + + ep = dev->dev_in_ep; + + while(!list_empty(&dev->dev_req_list)) { + + req_entry = list_entry(dev->dev_req_list.next, + struct gs_req_entry, re_entry); + + req = req_entry->re_req; + + len = gs_send_packet(dev, req->buf, ep->maxpacket); + + if (len > 0) { +gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2)); + list_del(&req_entry->re_entry); + req->length = len; + if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { + printk(KERN_ERR + "gs_send: cannot queue read request, ret=%d\n", + ret); + break; + } + } else { + break; + } + + } + + spin_unlock_irqrestore(&dev->dev_lock, flags); + + return 0; +} + +/* + * gs_send_packet + * + * If there is data to send, a packet is built in the given + * buffer and the size is returned. If there is no data to + * send, 0 is returned. If there is any error a negative + * error number is returned. + * + * Called during USB completion routine, on interrupt time. + * + * We assume that disconnect will not happen until all completion + * routines have completed, so we can assume that the dev_port + * array does not change during the lifetime of this function. + */ +static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size) +{ + unsigned int len; + struct gs_port *port; + + /* TEMPORARY -- only port 0 is supported right now */ + port = dev->dev_port[0]; + + if (port == NULL) { + printk(KERN_ERR + "gs_send_packet: port=%d, NULL port pointer\n", + 0); + return -EIO; + } + + spin_lock(&port->port_lock); + + len = gs_buf_data_avail(port->port_write_buf); + if (len < size) + size = len; + + if (size == 0) + goto exit; + + size = gs_buf_get(port->port_write_buf, packet, size); + + if (port->port_tty) + wake_up_interruptible(&port->port_tty->write_wait); + +exit: + spin_unlock(&port->port_lock); + return size; +} + +/* + * gs_recv_packet + * + * Called for each USB packet received. Reads the packet + * header and stuffs the data in the appropriate tty buffer. + * Returns 0 if successful, or a negative error number. + * + * Called during USB completion routine, on interrupt time. + * + * We assume that disconnect will not happen until all completion + * routines have completed, so we can assume that the dev_port + * array does not change during the lifetime of this function. + */ +static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size) +{ + unsigned int len; + struct gs_port *port; + int ret; + + /* TEMPORARY -- only port 0 is supported right now */ + port = dev->dev_port[0]; + + if (port == NULL) { + printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n", + port->port_num); + return -EIO; + } + + spin_lock(&port->port_lock); + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n", + port->port_num); + ret = -EIO; + goto exit; + } + + if (port->port_tty == NULL) { + printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n", + port->port_num); + ret = -EIO; + goto exit; + } + + if (port->port_tty->magic != TTY_MAGIC) { + printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n", + port->port_num); + ret = -EIO; + goto exit; + } + + len = (unsigned int)(TTY_FLIPBUF_SIZE - port->port_tty->flip.count); + if (len < size) + size = len; + + if (size > 0) { + memcpy(port->port_tty->flip.char_buf_ptr, packet, size); + port->port_tty->flip.char_buf_ptr += size; + port->port_tty->flip.count += size; + tty_flip_buffer_push(port->port_tty); + wake_up_interruptible(&port->port_tty->read_wait); + } + + ret = 0; + +exit: + spin_unlock(&port->port_lock); + return ret; +} + +/* +* gs_read_complete +*/ +static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) +{ + int ret; + struct gs_dev *dev = ep->driver_data; + + if (dev == NULL) { + printk(KERN_ERR "gs_read_complete: NULL device pointer\n"); + return; + } + + switch(req->status) { + case 0: + /* normal completion */ + gs_recv_packet(dev, req->buf, req->actual); +requeue: + req->length = ep->maxpacket; + if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { + printk(KERN_ERR + "gs_read_complete: cannot queue read request, ret=%d\n", + ret); + } + break; + + case -ESHUTDOWN: + /* disconnect */ + gs_debug("gs_read_complete: shutdown\n"); + gs_free_req(ep, req); + break; + + default: + /* unexpected */ + printk(KERN_ERR + "gs_read_complete: unexpected status error, status=%d\n", + req->status); + goto requeue; + break; + } +} + +/* +* gs_write_complete +*/ +static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct gs_dev *dev = ep->driver_data; + struct gs_req_entry *gs_req = req->context; + + if (dev == NULL) { + printk(KERN_ERR "gs_write_complete: NULL device pointer\n"); + return; + } + + switch(req->status) { + case 0: + /* normal completion */ +requeue: + if (gs_req == NULL) { + printk(KERN_ERR + "gs_write_complete: NULL request pointer\n"); + return; + } + + spin_lock(&dev->dev_lock); + list_add(&gs_req->re_entry, &dev->dev_req_list); + spin_unlock(&dev->dev_lock); + + gs_send(dev); + + break; + + case -ESHUTDOWN: + /* disconnect */ + gs_debug("gs_write_complete: shutdown\n"); + gs_free_req(ep, req); + break; + + default: + printk(KERN_ERR + "gs_write_complete: unexpected status error, status=%d\n", + req->status); + goto requeue; + break; + } +} + +/* Gadget Driver */ + +/* + * gs_bind + * + * Called on module load. Allocates and initializes the device + * structure and a control request. + */ +static int gs_bind(struct usb_gadget *gadget) +{ + int ret; + struct usb_ep *ep; + struct gs_dev *dev; + + /* device specific */ + if (gadget_is_net2280(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0001); + } else if (gadget_is_pxa(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0002); + } else if (gadget_is_sh(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0003); + /* sh doesn't support multiple interfaces or configs */ + use_acm = 0; + } else if (gadget_is_sa1100(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0004); + /* sa1100 doesn't support necessary endpoints */ + use_acm = 0; + } else if (gadget_is_goku(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0005); + } else if (gadget_is_mq11xx(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0006); + } else if (gadget_is_omap(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0007); + } else if (gadget_is_lh7a40x(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0008); + } else if (gadget_is_n9604(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0009); + } else if (gadget_is_pxa27x(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0011); + } else if (gadget_is_s3c2410(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0012); + } else if (gadget_is_at91(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0013); + } else { + printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n", + gadget->name); + /* unrecognized, but safe unless bulk is REALLY quirky */ + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0099); + } + + usb_ep_autoconfig_reset(gadget); + + ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc); + if (!ep) + goto autoconf_fail; + EP_IN_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + + ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc); + if (!ep) + goto autoconf_fail; + EP_OUT_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + + if (use_acm) { + ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc); + if (!ep) { + printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name); + goto autoconf_fail; + } + gs_device_desc.idProduct = __constant_cpu_to_le16( + GS_CDC_PRODUCT_ID), + EP_NOTIFY_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + } + + gs_device_desc.bDeviceClass = use_acm + ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; + gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + gs_qualifier_desc.bDeviceClass = use_acm + ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; + /* assume ep0 uses the same packet size for both speeds */ + gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0; + /* assume endpoints are dual-speed */ + gs_highspeed_notify_desc.bEndpointAddress = + gs_fullspeed_notify_desc.bEndpointAddress; + gs_highspeed_in_desc.bEndpointAddress = + gs_fullspeed_in_desc.bEndpointAddress; + gs_highspeed_out_desc.bEndpointAddress = + gs_fullspeed_out_desc.bEndpointAddress; +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + + usb_gadget_set_selfpowered(gadget); + + if (gadget->is_otg) { + gs_otg_descriptor.bmAttributes |= USB_OTG_HNP, + gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL); + if (dev == NULL) + return -ENOMEM; + + snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", + system_utsname.sysname, system_utsname.release, + gadget->name); + + memset(dev, 0, sizeof(struct gs_dev)); + dev->dev_gadget = gadget; + spin_lock_init(&dev->dev_lock); + INIT_LIST_HEAD(&dev->dev_req_list); + set_gadget_data(gadget, dev); + + if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) { + printk(KERN_ERR "gs_bind: cannot allocate ports\n"); + gs_unbind(gadget); + return ret; + } + + /* preallocate control response and buffer */ + dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN, + GFP_KERNEL); + if (dev->dev_ctrl_req == NULL) { + gs_unbind(gadget); + return -ENOMEM; + } + dev->dev_ctrl_req->complete = gs_setup_complete; + + gadget->ep0->driver_data = dev; + + printk(KERN_INFO "gs_bind: %s %s bound\n", + GS_LONG_NAME, GS_VERSION_STR); + + return 0; + +autoconf_fail: + printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name); + return -ENODEV; +} + +/* + * gs_unbind + * + * Called on module unload. Frees the control request and device + * structure. + */ +static void gs_unbind(struct usb_gadget *gadget) +{ + struct gs_dev *dev = get_gadget_data(gadget); + + gs_device = NULL; + + /* read/write requests already freed, only control request remains */ + if (dev != NULL) { + if (dev->dev_ctrl_req != NULL) { + gs_free_req(gadget->ep0, dev->dev_ctrl_req); + dev->dev_ctrl_req = NULL; + } + gs_free_ports(dev); + kfree(dev); + set_gadget_data(gadget, NULL); + } + + printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME, + GS_VERSION_STR); +} + +/* + * gs_setup + * + * Implements all the control endpoint functionality that's not + * handled in hardware or the hardware driver. + * + * Returns the size of the data sent to the host, or a negative + * error number. + */ +static int gs_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + int ret = -EOPNOTSUPP; + struct gs_dev *dev = get_gadget_data(gadget); + struct usb_request *req = dev->dev_ctrl_req; + u16 wIndex = ctrl->wIndex; + u16 wValue = ctrl->wValue; + u16 wLength = ctrl->wLength; + + switch (ctrl->bRequestType & USB_TYPE_MASK) { + case USB_TYPE_STANDARD: + ret = gs_setup_standard(gadget,ctrl); + break; + + case USB_TYPE_CLASS: + ret = gs_setup_class(gadget,ctrl); + break; + + default: + printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + + /* respond with data transfer before status phase? */ + if (ret >= 0) { + req->length = ret; + req->zero = ret < wLength + && (ret % gadget->ep0->maxpacket) == 0; + ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + if (ret < 0) { + printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n", + ret); + req->status = 0; + gs_setup_complete(gadget->ep0, req); + } + } + + /* device either stalls (ret < 0) or reports success */ + return ret; +} + +static int gs_setup_standard(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + int ret = -EOPNOTSUPP; + struct gs_dev *dev = get_gadget_data(gadget); + struct usb_request *req = dev->dev_ctrl_req; + u16 wIndex = ctrl->wIndex; + u16 wValue = ctrl->wValue; + u16 wLength = ctrl->wLength; + + switch (ctrl->bRequest) { + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != USB_DIR_IN) + break; + + switch (wValue >> 8) { + case USB_DT_DEVICE: + ret = min(wLength, + (u16)sizeof(struct usb_device_descriptor)); + memcpy(req->buf, &gs_device_desc, ret); + break; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + case USB_DT_DEVICE_QUALIFIER: + if (!gadget->is_dualspeed) + break; + ret = min(wLength, + (u16)sizeof(struct usb_qualifier_descriptor)); + memcpy(req->buf, &gs_qualifier_desc, ret); + break; + + case USB_DT_OTHER_SPEED_CONFIG: + if (!gadget->is_dualspeed) + break; + /* fall through */ +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + case USB_DT_CONFIG: + ret = gs_build_config_buf(req->buf, gadget->speed, + wValue >> 8, wValue & 0xff, + gadget->is_otg); + if (ret >= 0) + ret = min(wLength, (u16)ret); + break; + + case USB_DT_STRING: + /* wIndex == language code. */ + ret = usb_gadget_get_string(&gs_string_table, + wValue & 0xff, req->buf); + if (ret >= 0) + ret = min(wLength, (u16)ret); + break; + } + break; + + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) + break; + spin_lock(&dev->dev_lock); + ret = gs_set_config(dev, wValue); + spin_unlock(&dev->dev_lock); + break; + + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != USB_DIR_IN) + break; + *(u8 *)req->buf = dev->dev_config; + ret = min(wLength, (u16)1); + break; + + case USB_REQ_SET_INTERFACE: + if (ctrl->bRequestType != USB_RECIP_INTERFACE + || !dev->dev_config + || wIndex >= GS_MAX_NUM_INTERFACES) + break; + if (dev->dev_config == GS_BULK_CONFIG_ID + && wIndex != GS_BULK_INTERFACE_ID) + break; + /* no alternate interface settings */ + if (wValue != 0) + break; + spin_lock(&dev->dev_lock); + /* PXA hardware partially handles SET_INTERFACE; + * we need to kluge around that interference. */ + if (gadget_is_pxa(gadget)) { + ret = gs_set_config(dev, use_acm ? + GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID); + goto set_interface_done; + } + if (dev->dev_config != GS_BULK_CONFIG_ID + && wIndex == GS_CONTROL_INTERFACE_ID) { + if (dev->dev_notify_ep) { + usb_ep_disable(dev->dev_notify_ep); + usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc); + } + } else { + usb_ep_disable(dev->dev_in_ep); + usb_ep_disable(dev->dev_out_ep); + usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc); + usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc); + } + ret = 0; +set_interface_done: + spin_unlock(&dev->dev_lock); + break; + + case USB_REQ_GET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE) + || dev->dev_config == GS_NO_CONFIG_ID) + break; + if (wIndex >= GS_MAX_NUM_INTERFACES + || (dev->dev_config == GS_BULK_CONFIG_ID + && wIndex != GS_BULK_INTERFACE_ID)) { + ret = -EDOM; + break; + } + /* no alternate interface settings */ + *(u8 *)req->buf = 0; + ret = min(wLength, (u16)1); + break; + + default: + printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + + return ret; +} + +static int gs_setup_class(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + int ret = -EOPNOTSUPP; + struct gs_dev *dev = get_gadget_data(gadget); + struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */ + struct usb_request *req = dev->dev_ctrl_req; + u16 wIndex = ctrl->wIndex; + u16 wValue = ctrl->wValue; + u16 wLength = ctrl->wLength; + + switch (ctrl->bRequest) { + case USB_CDC_REQ_SET_LINE_CODING: + ret = min(wLength, + (u16)sizeof(struct usb_cdc_line_coding)); + if (port) { + spin_lock(&port->port_lock); + memcpy(&port->port_line_coding, req->buf, ret); + spin_unlock(&port->port_lock); + } + break; + + case USB_CDC_REQ_GET_LINE_CODING: + port = dev->dev_port[0]; /* ACM only has one port */ + ret = min(wLength, + (u16)sizeof(struct usb_cdc_line_coding)); + if (port) { + spin_lock(&port->port_lock); + memcpy(req->buf, &port->port_line_coding, ret); + spin_unlock(&port->port_lock); + } + break; + + case USB_CDC_REQ_SET_CONTROL_LINE_STATE: + ret = 0; + break; + + default: + printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + + return ret; +} + +/* + * gs_setup_complete + */ +static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) { + printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n", + req->status, req->actual, req->length); + } +} + +/* + * gs_disconnect + * + * Called when the device is disconnected. Frees the closed + * ports and disconnects open ports. Open ports will be freed + * on close. Then reallocates the ports for the next connection. + */ +static void gs_disconnect(struct usb_gadget *gadget) +{ + unsigned long flags; + struct gs_dev *dev = get_gadget_data(gadget); + + spin_lock_irqsave(&dev->dev_lock, flags); + + gs_reset_config(dev); + + /* free closed ports and disconnect open ports */ + /* (open ports will be freed when closed) */ + gs_free_ports(dev); + + /* re-allocate ports for the next connection */ + if (gs_alloc_ports(dev, GFP_ATOMIC) != 0) + printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n"); + + spin_unlock_irqrestore(&dev->dev_lock, flags); + + printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME); +} + +/* + * gs_set_config + * + * Configures the device by enabling device specific + * optimizations, setting up the endpoints, allocating + * read and write requests and queuing read requests. + * + * The device lock must be held when calling this function. + */ +static int gs_set_config(struct gs_dev *dev, unsigned config) +{ + int i; + int ret = 0; + struct usb_gadget *gadget = dev->dev_gadget; + struct usb_ep *ep; + struct usb_endpoint_descriptor *ep_desc; + struct usb_request *req; + struct gs_req_entry *req_entry; + + if (dev == NULL) { + printk(KERN_ERR "gs_set_config: NULL device pointer\n"); + return 0; + } + + if (config == dev->dev_config) + return 0; + + gs_reset_config(dev); + + switch (config) { + case GS_NO_CONFIG_ID: + return 0; + case GS_BULK_CONFIG_ID: + if (use_acm) + return -EINVAL; + /* device specific optimizations */ + if (gadget_is_net2280(gadget)) + net2280_set_fifo_mode(gadget, 1); + break; + case GS_ACM_CONFIG_ID: + if (!use_acm) + return -EINVAL; + /* device specific optimizations */ + if (gadget_is_net2280(gadget)) + net2280_set_fifo_mode(gadget, 1); + break; + default: + return -EINVAL; + } + + dev->dev_config = config; + + gadget_for_each_ep(ep, gadget) { + + if (EP_NOTIFY_NAME + && strcmp(ep->name, EP_NOTIFY_NAME) == 0) { + ep_desc = GS_SPEED_SELECT( + gadget->speed == USB_SPEED_HIGH, + &gs_highspeed_notify_desc, + &gs_fullspeed_notify_desc); + ret = usb_ep_enable(ep,ep_desc); + if (ret == 0) { + ep->driver_data = dev; + dev->dev_notify_ep = ep; + dev->dev_notify_ep_desc = ep_desc; + } else { + printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n", + ep->name, ret); + goto exit_reset_config; + } + } + + else if (strcmp(ep->name, EP_IN_NAME) == 0) { + ep_desc = GS_SPEED_SELECT( + gadget->speed == USB_SPEED_HIGH, + &gs_highspeed_in_desc, + &gs_fullspeed_in_desc); + ret = usb_ep_enable(ep,ep_desc); + if (ret == 0) { + ep->driver_data = dev; + dev->dev_in_ep = ep; + dev->dev_in_ep_desc = ep_desc; + } else { + printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n", + ep->name, ret); + goto exit_reset_config; + } + } + + else if (strcmp(ep->name, EP_OUT_NAME) == 0) { + ep_desc = GS_SPEED_SELECT( + gadget->speed == USB_SPEED_HIGH, + &gs_highspeed_out_desc, + &gs_fullspeed_out_desc); + ret = usb_ep_enable(ep,ep_desc); + if (ret == 0) { + ep->driver_data = dev; + dev->dev_out_ep = ep; + dev->dev_out_ep_desc = ep_desc; + } else { + printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n", + ep->name, ret); + goto exit_reset_config; + } + } + + } + + if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL + || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) { + printk(KERN_ERR "gs_set_config: cannot find endpoints\n"); + ret = -ENODEV; + goto exit_reset_config; + } + + /* allocate and queue read requests */ + ep = dev->dev_out_ep; + for (i=0; i<read_q_size && ret == 0; i++) { + if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) { + req->complete = gs_read_complete; + if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { + printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n", + ret); + } + } else { + printk(KERN_ERR "gs_set_config: cannot allocate read requests\n"); + ret = -ENOMEM; + goto exit_reset_config; + } + } + + /* allocate write requests, and put on free list */ + ep = dev->dev_in_ep; + for (i=0; i<write_q_size; i++) { + if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) { + req_entry->re_req->complete = gs_write_complete; + list_add(&req_entry->re_entry, &dev->dev_req_list); + } else { + printk(KERN_ERR "gs_set_config: cannot allocate write requests\n"); + ret = -ENOMEM; + goto exit_reset_config; + } + } + + printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n", + GS_LONG_NAME, + gadget->speed == USB_SPEED_HIGH ? "high" : "full", + config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM"); + + return 0; + +exit_reset_config: + gs_reset_config(dev); + return ret; +} + +/* + * gs_reset_config + * + * Mark the device as not configured, disable all endpoints, + * which forces completion of pending I/O and frees queued + * requests, and free the remaining write requests on the + * free list. + * + * The device lock must be held when calling this function. + */ +static void gs_reset_config(struct gs_dev *dev) +{ + struct gs_req_entry *req_entry; + + if (dev == NULL) { + printk(KERN_ERR "gs_reset_config: NULL device pointer\n"); + return; + } + + if (dev->dev_config == GS_NO_CONFIG_ID) + return; + + dev->dev_config = GS_NO_CONFIG_ID; + + /* free write requests on the free list */ + while(!list_empty(&dev->dev_req_list)) { + req_entry = list_entry(dev->dev_req_list.next, + struct gs_req_entry, re_entry); + list_del(&req_entry->re_entry); + gs_free_req_entry(dev->dev_in_ep, req_entry); + } + + /* disable endpoints, forcing completion of pending i/o; */ + /* completion handlers free their requests in this case */ + if (dev->dev_notify_ep) { + usb_ep_disable(dev->dev_notify_ep); + dev->dev_notify_ep = NULL; + } + if (dev->dev_in_ep) { + usb_ep_disable(dev->dev_in_ep); + dev->dev_in_ep = NULL; + } + if (dev->dev_out_ep) { + usb_ep_disable(dev->dev_out_ep); + dev->dev_out_ep = NULL; + } +} + +/* + * gs_build_config_buf + * + * Builds the config descriptors in the given buffer and returns the + * length, or a negative error number. + */ +static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, + u8 type, unsigned int index, int is_otg) +{ + int len; + int high_speed; + const struct usb_config_descriptor *config_desc; + const struct usb_descriptor_header **function; + + if (index >= gs_device_desc.bNumConfigurations) + return -EINVAL; + + /* other speed switches high and full speed */ + high_speed = (speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + high_speed = !high_speed; + + if (use_acm) { + config_desc = &gs_acm_config_desc; + function = GS_SPEED_SELECT(high_speed, + gs_acm_highspeed_function, + gs_acm_fullspeed_function); + } else { + config_desc = &gs_bulk_config_desc; + function = GS_SPEED_SELECT(high_speed, + gs_bulk_highspeed_function, + gs_bulk_fullspeed_function); + } + + /* for now, don't advertise srp-only devices */ + if (!is_otg) + function++; + + len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function); + if (len < 0) + return len; + + ((struct usb_config_descriptor *)buf)->bDescriptorType = type; + + return len; +} + +/* + * gs_alloc_req + * + * Allocate a usb_request and its buffer. Returns a pointer to the + * usb_request or NULL if there is an error. + */ +static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, int kmalloc_flags) +{ + struct usb_request *req; + + if (ep == NULL) + return NULL; + + req = usb_ep_alloc_request(ep, kmalloc_flags); + + if (req != NULL) { + req->length = len; + req->buf = kmalloc(len, kmalloc_flags); + if (req->buf == NULL) { + usb_ep_free_request(ep, req); + return NULL; + } + } + + return req; +} + +/* + * gs_free_req + * + * Free a usb_request and its buffer. + */ +static void gs_free_req(struct usb_ep *ep, struct usb_request *req) +{ + if (ep != NULL && req != NULL) { + kfree(req->buf); + usb_ep_free_request(ep, req); + } +} + +/* + * gs_alloc_req_entry + * + * Allocates a request and its buffer, using the given + * endpoint, buffer len, and kmalloc flags. + */ +static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, int kmalloc_flags) +{ + struct gs_req_entry *req; + + req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags); + if (req == NULL) + return NULL; + + req->re_req = gs_alloc_req(ep, len, kmalloc_flags); + if (req->re_req == NULL) { + kfree(req); + return NULL; + } + + req->re_req->context = req; + + return req; +} + +/* + * gs_free_req_entry + * + * Frees a request and its buffer. + */ +static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req) +{ + if (ep != NULL && req != NULL) { + if (req->re_req != NULL) + gs_free_req(ep, req->re_req); + kfree(req); + } +} + +/* + * gs_alloc_ports + * + * Allocate all ports and set the gs_dev struct to point to them. + * Return 0 if successful, or a negative error number. + * + * The device lock is normally held when calling this function. + */ +static int gs_alloc_ports(struct gs_dev *dev, int kmalloc_flags) +{ + int i; + struct gs_port *port; + + if (dev == NULL) + return -EIO; + + for (i=0; i<GS_NUM_PORTS; i++) { + if ((port=(struct gs_port *)kmalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL) + return -ENOMEM; + + memset(port, 0, sizeof(struct gs_port)); + port->port_dev = dev; + port->port_num = i; + port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE); + port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT; + port->port_line_coding.bParityType = GS_DEFAULT_PARITY; + port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS; + spin_lock_init(&port->port_lock); + init_waitqueue_head(&port->port_write_wait); + + dev->dev_port[i] = port; + } + + return 0; +} + +/* + * gs_free_ports + * + * Free all closed ports. Open ports are disconnected by + * freeing their write buffers, setting their device pointers + * and the pointers to them in the device to NULL. These + * ports will be freed when closed. + * + * The device lock is normally held when calling this function. + */ +static void gs_free_ports(struct gs_dev *dev) +{ + int i; + unsigned long flags; + struct gs_port *port; + + if (dev == NULL) + return; + + for (i=0; i<GS_NUM_PORTS; i++) { + if ((port=dev->dev_port[i]) != NULL) { + dev->dev_port[i] = NULL; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_write_buf != NULL) { + gs_buf_free(port->port_write_buf); + port->port_write_buf = NULL; + } + + if (port->port_open_count > 0 || port->port_in_use) { + port->port_dev = NULL; + wake_up_interruptible(&port->port_write_wait); + if (port->port_tty) { + wake_up_interruptible(&port->port_tty->read_wait); + wake_up_interruptible(&port->port_tty->write_wait); + } + spin_unlock_irqrestore(&port->port_lock, flags); + } else { + spin_unlock_irqrestore(&port->port_lock, flags); + kfree(port); + } + + } + } +} + +/* Circular Buffer */ + +/* + * gs_buf_alloc + * + * Allocate a circular buffer and all associated memory. + */ +static struct gs_buf *gs_buf_alloc(unsigned int size, int kmalloc_flags) +{ + struct gs_buf *gb; + + if (size == 0) + return NULL; + + gb = (struct gs_buf *)kmalloc(sizeof(struct gs_buf), kmalloc_flags); + if (gb == NULL) + return NULL; + + gb->buf_buf = kmalloc(size, kmalloc_flags); + if (gb->buf_buf == NULL) { + kfree(gb); + return NULL; + } + + gb->buf_size = size; + gb->buf_get = gb->buf_put = gb->buf_buf; + + return gb; +} + +/* + * gs_buf_free + * + * Free the buffer and all associated memory. + */ +void gs_buf_free(struct gs_buf *gb) +{ + if (gb != NULL) { + if (gb->buf_buf != NULL) + kfree(gb->buf_buf); + kfree(gb); + } +} + +/* + * gs_buf_clear + * + * Clear out all data in the circular buffer. + */ +void gs_buf_clear(struct gs_buf *gb) +{ + if (gb != NULL) + gb->buf_get = gb->buf_put; + /* equivalent to a get of all data available */ +} + +/* + * gs_buf_data_avail + * + * Return the number of bytes of data available in the circular + * buffer. + */ +unsigned int gs_buf_data_avail(struct gs_buf *gb) +{ + if (gb != NULL) + return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size; + else + return 0; +} + +/* + * gs_buf_space_avail + * + * Return the number of bytes of space available in the circular + * buffer. + */ +unsigned int gs_buf_space_avail(struct gs_buf *gb) +{ + if (gb != NULL) + return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size; + else + return 0; +} + +/* + * gs_buf_put + * + * Copy data data from a user buffer and put it into the circular buffer. + * Restrict to the amount of space available. + * + * Return the number of bytes copied. + */ +unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count) +{ + unsigned int len; + + if (gb == NULL) + return 0; + + len = gs_buf_space_avail(gb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = gb->buf_buf + gb->buf_size - gb->buf_put; + if (count > len) { + memcpy(gb->buf_put, buf, len); + memcpy(gb->buf_buf, buf+len, count - len); + gb->buf_put = gb->buf_buf + count - len; + } else { + memcpy(gb->buf_put, buf, count); + if (count < len) + gb->buf_put += count; + else /* count == len */ + gb->buf_put = gb->buf_buf; + } + + return count; +} + +/* + * gs_buf_get + * + * Get data from the circular buffer and copy to the given buffer. + * Restrict to the amount of data available. + * + * Return the number of bytes copied. + */ +unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count) +{ + unsigned int len; + + if (gb == NULL) + return 0; + + len = gs_buf_data_avail(gb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = gb->buf_buf + gb->buf_size - gb->buf_get; + if (count > len) { + memcpy(buf, gb->buf_get, len); + memcpy(buf+len, gb->buf_buf, count - len); + gb->buf_get = gb->buf_buf + count - len; + } else { + memcpy(buf, gb->buf_get, count); + if (count < len) + gb->buf_get += count; + else /* count == len */ + gb->buf_get = gb->buf_buf; + } + + return count; +} diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c new file mode 100644 index 0000000..b173576 --- /dev/null +++ b/drivers/usb/gadget/usbstring.c @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2003 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/string.h> +#include <linux/device.h> +#include <linux/init.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +#include <asm/unaligned.h> + + +static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) +{ + int count = 0; + u8 c; + u16 uchar; + + /* this insists on correct encodings, though not minimal ones. + * BUT it currently rejects legit 4-byte UTF-8 code points, + * which need surrogate pairs. (Unicode 3.1 can use them.) + */ + while (len != 0 && (c = (u8) *s++) != 0) { + if (unlikely(c & 0x80)) { + // 2-byte sequence: + // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx + if ((c & 0xe0) == 0xc0) { + uchar = (c & 0x1f) << 6; + + c = (u8) *s++; + if ((c & 0xc0) != 0xc0) + goto fail; + c &= 0x3f; + uchar |= c; + + // 3-byte sequence (most CJKV characters): + // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx + } else if ((c & 0xf0) == 0xe0) { + uchar = (c & 0x0f) << 12; + + c = (u8) *s++; + if ((c & 0xc0) != 0xc0) + goto fail; + c &= 0x3f; + uchar |= c << 6; + + c = (u8) *s++; + if ((c & 0xc0) != 0xc0) + goto fail; + c &= 0x3f; + uchar |= c; + + /* no bogus surrogates */ + if (0xd800 <= uchar && uchar <= 0xdfff) + goto fail; + + // 4-byte sequence (surrogate pairs, currently rare): + // 11101110wwwwzzzzyy + 110111yyyyxxxxxx + // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx + // (uuuuu = wwww + 1) + // FIXME accept the surrogate code points (only) + + } else + goto fail; + } else + uchar = c; + put_unaligned (cpu_to_le16 (uchar), cp++); + count++; + len--; + } + return count; +fail: + return -1; +} + + +/** + * usb_gadget_get_string - fill out a string descriptor + * @table: of c strings encoded using UTF-8 + * @id: string id, from low byte of wValue in get string descriptor + * @buf: at least 256 bytes + * + * Finds the UTF-8 string matching the ID, and converts it into a + * string descriptor in utf16-le. + * Returns length of descriptor (always even) or negative errno + * + * If your driver needs stings in multiple languages, you'll probably + * "switch (wIndex) { ... }" in your ep0 string descriptor logic, + * using this routine after choosing which set of UTF-8 strings to use. + * Note that US-ASCII is a strict subset of UTF-8; any string bytes with + * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 + * characters (which are also widely used in C strings). + */ +int +usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) +{ + struct usb_string *s; + int len; + + /* descriptor 0 has the language id */ + if (id == 0) { + buf [0] = 4; + buf [1] = USB_DT_STRING; + buf [2] = (u8) table->language; + buf [3] = (u8) (table->language >> 8); + return 4; + } + for (s = table->strings; s && s->s; s++) + if (s->id == id) + break; + + /* unrecognized: stall. */ + if (!s || !s->s) + return -EINVAL; + + /* string descriptors have length, tag, then UTF16-LE text */ + len = min ((size_t) 126, strlen (s->s)); + memset (buf + 2, 0, 2 * len); /* zero all the bytes */ + len = utf8_to_utf16le(s->s, (__le16 *)&buf[2], len); + if (len < 0) + return -EINVAL; + buf [0] = (len + 1) * 2; + buf [1] = USB_DT_STRING; + return buf [0]; +} + diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c new file mode 100644 index 0000000..6e49432 --- /dev/null +++ b/drivers/usb/gadget/zero.c @@ -0,0 +1,1357 @@ +/* + * zero.c -- Gadget Zero, for USB development + * + * Copyright (C) 2003-2004 David Brownell + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/* + * Gadget Zero only needs two bulk endpoints, and is an example of how you + * can write a hardware-agnostic gadget driver running inside a USB device. + * + * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't + * affect most of the driver. + * + * Use it with the Linux host/master side "usbtest" driver to get a basic + * functional test of your device-side usb stack, or with "usb-skeleton". + * + * It supports two similar configurations. One sinks whatever the usb host + * writes, and in return sources zeroes. The other loops whatever the host + * writes back, so the host can read it. Module options include: + * + * buflen=N default N=4096, buffer size used + * qlen=N default N=32, how many buffers in the loopback queue + * loopdefault default false, list loopback config first + * + * Many drivers will only have one configuration, letting them be much + * simpler if they also don't support high speed operation (like this + * driver does). + */ + +#define DEBUG 1 +// #define VERBOSE + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/utsname.h> +#include <linux/device.h> +#include <linux/moduleparam.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> + +#include <linux/usb_ch9.h> +#include <linux/usb_gadget.h> + +#include "gadget_chips.h" + + +/*-------------------------------------------------------------------------*/ + +#define DRIVER_VERSION "St Patrick's Day 2004" + +static const char shortname [] = "zero"; +static const char longname [] = "Gadget Zero"; + +static const char source_sink [] = "source and sink data"; +static const char loopback [] = "loop input to output"; + +/*-------------------------------------------------------------------------*/ + +/* + * driver assumes self-powered hardware, and + * has no way for users to trigger remote wakeup. + * + * this version autoconfigures as much as possible, + * which is reasonable for most "bulk-only" drivers. + */ +static const char *EP_IN_NAME; /* source */ +static const char *EP_OUT_NAME; /* sink */ + +/*-------------------------------------------------------------------------*/ + +/* big enough to hold our biggest descriptor */ +#define USB_BUFSIZ 256 + +struct zero_dev { + spinlock_t lock; + struct usb_gadget *gadget; + struct usb_request *req; /* for control responses */ + + /* when configured, we have one of two configs: + * - source data (in to host) and sink it (out from host) + * - or loop it back (out from host back in to host) + */ + u8 config; + struct usb_ep *in_ep, *out_ep; + + /* autoresume timer */ + struct timer_list resume; +}; + +#define xprintk(d,level,fmt,args...) \ + dev_printk(level , &(d)->gadget->dev , fmt , ## args) + +#ifdef DEBUG +#define DBG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(dev,fmt,args...) \ + do { } while (0) +#endif /* VERBOSE */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARN(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + +/*-------------------------------------------------------------------------*/ + +static unsigned buflen = 4096; +static unsigned qlen = 32; +static unsigned pattern = 0; + +module_param (buflen, uint, S_IRUGO|S_IWUSR); +module_param (qlen, uint, S_IRUGO|S_IWUSR); +module_param (pattern, uint, S_IRUGO|S_IWUSR); + +/* + * if it's nonzero, autoresume says how many seconds to wait + * before trying to wake up the host after suspend. + */ +static unsigned autoresume = 0; +module_param (autoresume, uint, 0); + +/* + * Normally the "loopback" configuration is second (index 1) so + * it's not the default. Here's where to change that order, to + * work better with hosts where config changes are problematic. + * Or controllers (like superh) that only support one config. + */ +static int loopdefault = 0; + +module_param (loopdefault, bool, S_IRUGO|S_IWUSR); + +/*-------------------------------------------------------------------------*/ + +/* Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#ifndef CONFIG_USB_ZERO_HNPTEST +#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ +#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ +#else +#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ +#define DRIVER_PRODUCT_NUM 0xbadd +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * DESCRIPTORS ... most are static, but strings and (full) + * configuration descriptors are built on demand. + */ + +#define STRING_MANUFACTURER 25 +#define STRING_PRODUCT 42 +#define STRING_SERIAL 101 +#define STRING_SOURCE_SINK 250 +#define STRING_LOOPBACK 251 + +/* + * This device advertises two configurations; these numbers work + * on a pxa250 as well as more flexible hardware. + */ +#define CONFIG_SOURCE_SINK 3 +#define CONFIG_LOOPBACK 2 + +static struct usb_device_descriptor +device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + + .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + + .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), + .iManufacturer = STRING_MANUFACTURER, + .iProduct = STRING_PRODUCT, + .iSerialNumber = STRING_SERIAL, + .bNumConfigurations = 2, +}; + +static struct usb_config_descriptor +source_sink_config = { + .bLength = sizeof source_sink_config, + .bDescriptorType = USB_DT_CONFIG, + + /* compute wTotalLength on the fly */ + .bNumInterfaces = 1, + .bConfigurationValue = CONFIG_SOURCE_SINK, + .iConfiguration = STRING_SOURCE_SINK, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 1, /* self-powered */ +}; + +static struct usb_config_descriptor +loopback_config = { + .bLength = sizeof loopback_config, + .bDescriptorType = USB_DT_CONFIG, + + /* compute wTotalLength on the fly */ + .bNumInterfaces = 1, + .bConfigurationValue = CONFIG_LOOPBACK, + .iConfiguration = STRING_LOOPBACK, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 1, /* self-powered */ +}; + +static struct usb_otg_descriptor +otg_descriptor = { + .bLength = sizeof otg_descriptor, + .bDescriptorType = USB_DT_OTG, + + .bmAttributes = USB_OTG_SRP, +}; + +/* one interface in each configuration */ + +static const struct usb_interface_descriptor +source_sink_intf = { + .bLength = sizeof source_sink_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .iInterface = STRING_SOURCE_SINK, +}; + +static const struct usb_interface_descriptor +loopback_intf = { + .bLength = sizeof loopback_intf, + .bDescriptorType = USB_DT_INTERFACE, + + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .iInterface = STRING_LOOPBACK, +}; + +/* two full speed bulk endpoints; their use is config-dependent */ + +static struct usb_endpoint_descriptor +fs_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor +fs_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static const struct usb_descriptor_header *fs_source_sink_function [] = { + (struct usb_descriptor_header *) &otg_descriptor, + (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &fs_sink_desc, + (struct usb_descriptor_header *) &fs_source_desc, + NULL, +}; + +static const struct usb_descriptor_header *fs_loopback_function [] = { + (struct usb_descriptor_header *) &otg_descriptor, + (struct usb_descriptor_header *) &loopback_intf, + (struct usb_descriptor_header *) &fs_sink_desc, + (struct usb_descriptor_header *) &fs_source_desc, + NULL, +}; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + +/* + * usb 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + * + * that means alternate endpoint descriptors (bigger packets) + * and a "device qualifier" ... plus more construction options + * for the config descriptor. + */ + +static struct usb_endpoint_descriptor +hs_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16 (512), +}; + +static struct usb_endpoint_descriptor +hs_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16 (512), +}; + +static struct usb_qualifier_descriptor +dev_qualifier = { + .bLength = sizeof dev_qualifier, + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + + .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + + .bNumConfigurations = 2, +}; + +static const struct usb_descriptor_header *hs_source_sink_function [] = { + (struct usb_descriptor_header *) &otg_descriptor, + (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &hs_source_desc, + (struct usb_descriptor_header *) &hs_sink_desc, + NULL, +}; + +static const struct usb_descriptor_header *hs_loopback_function [] = { + (struct usb_descriptor_header *) &otg_descriptor, + (struct usb_descriptor_header *) &loopback_intf, + (struct usb_descriptor_header *) &hs_source_desc, + (struct usb_descriptor_header *) &hs_sink_desc, + NULL, +}; + +/* maxpacket and other transfer characteristics vary by speed. */ +#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) + +#else + +/* if there's no high speed support, maxpacket doesn't change. */ +#define ep_desc(g,hs,fs) fs + +#endif /* !CONFIG_USB_GADGET_DUALSPEED */ + +static char manufacturer [50]; +static char serial [40]; + +/* static strings, in UTF-8 */ +static struct usb_string strings [] = { + { STRING_MANUFACTURER, manufacturer, }, + { STRING_PRODUCT, longname, }, + { STRING_SERIAL, serial, }, + { STRING_LOOPBACK, loopback, }, + { STRING_SOURCE_SINK, source_sink, }, + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab = { + .language = 0x0409, /* en-us */ + .strings = strings, +}; + +/* + * config descriptors are also handcrafted. these must agree with code + * that sets configurations, and with code managing interfaces and their + * altsettings. other complexity may come from: + * + * - high speed support, including "other speed config" rules + * - multiple configurations + * - interfaces with alternate settings + * - embedded class or vendor-specific descriptors + * + * this handles high speed, and has a second config that could as easily + * have been an alternate interface setting (on most hardware). + * + * NOTE: to demonstrate (and test) more USB capabilities, this driver + * should include an altsetting to test interrupt transfers, including + * high bandwidth modes at high speed. (Maybe work like Intel's test + * device?) + */ +static int +config_buf (struct usb_gadget *gadget, + u8 *buf, u8 type, unsigned index) +{ + int is_source_sink; + int len; + const struct usb_descriptor_header **function; +#ifdef CONFIG_USB_GADGET_DUALSPEED + int hs = (gadget->speed == USB_SPEED_HIGH); +#endif + + /* two configurations will always be index 0 and index 1 */ + if (index > 1) + return -EINVAL; + is_source_sink = loopdefault ? (index == 1) : (index == 0); + +#ifdef CONFIG_USB_GADGET_DUALSPEED + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; + if (hs) + function = is_source_sink + ? hs_source_sink_function + : hs_loopback_function; + else +#endif + function = is_source_sink + ? fs_source_sink_function + : fs_loopback_function; + + /* for now, don't advertise srp-only devices */ + if (!gadget->is_otg) + function++; + + len = usb_gadget_config_buf (is_source_sink + ? &source_sink_config + : &loopback_config, + buf, USB_BUFSIZ, function); + if (len < 0) + return len; + ((struct usb_config_descriptor *) buf)->bDescriptorType = type; + return len; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +alloc_ep_req (struct usb_ep *ep, unsigned length) +{ + struct usb_request *req; + + req = usb_ep_alloc_request (ep, GFP_ATOMIC); + if (req) { + req->length = length; + req->buf = usb_ep_alloc_buffer (ep, length, + &req->dma, GFP_ATOMIC); + if (!req->buf) { + usb_ep_free_request (ep, req); + req = NULL; + } + } + return req; +} + +static void free_ep_req (struct usb_ep *ep, struct usb_request *req) +{ + if (req->buf) + usb_ep_free_buffer (ep, req->buf, req->dma, req->length); + usb_ep_free_request (ep, req); +} + +/*-------------------------------------------------------------------------*/ + +/* optionally require specific source/sink data patterns */ + +static int +check_read_data ( + struct zero_dev *dev, + struct usb_ep *ep, + struct usb_request *req +) +{ + unsigned i; + u8 *buf = req->buf; + + for (i = 0; i < req->actual; i++, buf++) { + switch (pattern) { + /* all-zeroes has no synchronization issues */ + case 0: + if (*buf == 0) + continue; + break; + /* mod63 stays in sync with short-terminated transfers, + * or otherwise when host and gadget agree on how large + * each usb transfer request should be. resync is done + * with set_interface or set_config. + */ + case 1: + if (*buf == (u8)(i % 63)) + continue; + break; + } + ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); + usb_ep_set_halt (ep); + return -EINVAL; + } + return 0; +} + +static void +reinit_write_data ( + struct zero_dev *dev, + struct usb_ep *ep, + struct usb_request *req +) +{ + unsigned i; + u8 *buf = req->buf; + + switch (pattern) { + case 0: + memset (req->buf, 0, req->length); + break; + case 1: + for (i = 0; i < req->length; i++) + *buf++ = (u8) (i % 63); + break; + } +} + +/* if there is only one request in the queue, there'll always be an + * irq delay between end of one request and start of the next. + * that prevents using hardware dma queues. + */ +static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct zero_dev *dev = ep->driver_data; + int status = req->status; + + switch (status) { + + case 0: /* normal completion? */ + if (ep == dev->out_ep) + check_read_data (dev, ep, req); + else + reinit_write_data (dev, ep, req); + break; + + /* this endpoint is normally active while we're configured */ + case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNRESET: /* request dequeued */ + case -ESHUTDOWN: /* disconnect from host */ + VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, + req->actual, req->length); + if (ep == dev->out_ep) + check_read_data (dev, ep, req); + free_ep_req (ep, req); + return; + + case -EOVERFLOW: /* buffer overrun on read means that + * we didn't provide a big enough + * buffer. + */ + default: +#if 1 + DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, + status, req->actual, req->length); +#endif + case -EREMOTEIO: /* short read */ + break; + } + + status = usb_ep_queue (ep, req, GFP_ATOMIC); + if (status) { + ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", + ep->name, req->length, status); + usb_ep_set_halt (ep); + /* FIXME recover later ... somehow */ + } +} + +static struct usb_request * +source_sink_start_ep (struct usb_ep *ep, int gfp_flags) +{ + struct usb_request *req; + int status; + + req = alloc_ep_req (ep, buflen); + if (!req) + return NULL; + + memset (req->buf, 0, req->length); + req->complete = source_sink_complete; + + if (strcmp (ep->name, EP_IN_NAME) == 0) + reinit_write_data (ep->driver_data, ep, req); + + status = usb_ep_queue (ep, req, gfp_flags); + if (status) { + struct zero_dev *dev = ep->driver_data; + + ERROR (dev, "start %s --> %d\n", ep->name, status); + free_ep_req (ep, req); + req = NULL; + } + + return req; +} + +static int +set_source_sink_config (struct zero_dev *dev, int gfp_flags) +{ + int result = 0; + struct usb_ep *ep; + struct usb_gadget *gadget = dev->gadget; + + gadget_for_each_ep (ep, gadget) { + const struct usb_endpoint_descriptor *d; + + /* one endpoint writes (sources) zeroes in (to the host) */ + if (strcmp (ep->name, EP_IN_NAME) == 0) { + d = ep_desc (gadget, &hs_source_desc, &fs_source_desc); + result = usb_ep_enable (ep, d); + if (result == 0) { + ep->driver_data = dev; + if (source_sink_start_ep (ep, gfp_flags) != 0) { + dev->in_ep = ep; + continue; + } + usb_ep_disable (ep); + result = -EIO; + } + + /* one endpoint reads (sinks) anything out (from the host) */ + } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { + d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc); + result = usb_ep_enable (ep, d); + if (result == 0) { + ep->driver_data = dev; + if (source_sink_start_ep (ep, gfp_flags) != 0) { + dev->out_ep = ep; + continue; + } + usb_ep_disable (ep); + result = -EIO; + } + + /* ignore any other endpoints */ + } else + continue; + + /* stop on error */ + ERROR (dev, "can't start %s, result %d\n", ep->name, result); + break; + } + if (result == 0) + DBG (dev, "buflen %d\n", buflen); + + /* caller is responsible for cleanup on error */ + return result; +} + +/*-------------------------------------------------------------------------*/ + +static void loopback_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct zero_dev *dev = ep->driver_data; + int status = req->status; + + switch (status) { + + case 0: /* normal completion? */ + if (ep == dev->out_ep) { + /* loop this OUT packet back IN to the host */ + req->zero = (req->actual < req->length); + req->length = req->actual; + status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); + if (status == 0) + return; + + /* "should never get here" */ + ERROR (dev, "can't loop %s to %s: %d\n", + ep->name, dev->in_ep->name, + status); + } + + /* queue the buffer for some later OUT packet */ + req->length = buflen; + status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC); + if (status == 0) + return; + + /* "should never get here" */ + /* FALLTHROUGH */ + + default: + ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name, + status, req->actual, req->length); + /* FALLTHROUGH */ + + /* NOTE: since this driver doesn't maintain an explicit record + * of requests it submitted (just maintains qlen count), we + * rely on the hardware driver to clean up on disconnect or + * endpoint disable. + */ + case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNRESET: /* request dequeued */ + case -ESHUTDOWN: /* disconnect from host */ + free_ep_req (ep, req); + return; + } +} + +static int +set_loopback_config (struct zero_dev *dev, int gfp_flags) +{ + int result = 0; + struct usb_ep *ep; + struct usb_gadget *gadget = dev->gadget; + + gadget_for_each_ep (ep, gadget) { + const struct usb_endpoint_descriptor *d; + + /* one endpoint writes data back IN to the host */ + if (strcmp (ep->name, EP_IN_NAME) == 0) { + d = ep_desc (gadget, &hs_source_desc, &fs_source_desc); + result = usb_ep_enable (ep, d); + if (result == 0) { + ep->driver_data = dev; + dev->in_ep = ep; + continue; + } + + /* one endpoint just reads OUT packets */ + } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { + d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc); + result = usb_ep_enable (ep, d); + if (result == 0) { + ep->driver_data = dev; + dev->out_ep = ep; + continue; + } + + /* ignore any other endpoints */ + } else + continue; + + /* stop on error */ + ERROR (dev, "can't enable %s, result %d\n", ep->name, result); + break; + } + + /* allocate a bunch of read buffers and queue them all at once. + * we buffer at most 'qlen' transfers; fewer if any need more + * than 'buflen' bytes each. + */ + if (result == 0) { + struct usb_request *req; + unsigned i; + + ep = dev->out_ep; + for (i = 0; i < qlen && result == 0; i++) { + req = alloc_ep_req (ep, buflen); + if (req) { + req->complete = loopback_complete; + result = usb_ep_queue (ep, req, GFP_ATOMIC); + if (result) + DBG (dev, "%s queue req --> %d\n", + ep->name, result); + } else + result = -ENOMEM; + } + } + if (result == 0) + DBG (dev, "qlen %d, buflen %d\n", qlen, buflen); + + /* caller is responsible for cleanup on error */ + return result; +} + +/*-------------------------------------------------------------------------*/ + +static void zero_reset_config (struct zero_dev *dev) +{ + if (dev->config == 0) + return; + + DBG (dev, "reset config\n"); + + /* just disable endpoints, forcing completion of pending i/o. + * all our completion handlers free their requests in this case. + */ + if (dev->in_ep) { + usb_ep_disable (dev->in_ep); + dev->in_ep = NULL; + } + if (dev->out_ep) { + usb_ep_disable (dev->out_ep); + dev->out_ep = NULL; + } + dev->config = 0; + del_timer (&dev->resume); +} + +/* change our operational config. this code must agree with the code + * that returns config descriptors, and altsetting code. + * + * it's also responsible for power management interactions. some + * configurations might not work with our current power sources. + * + * note that some device controller hardware will constrain what this + * code can do, perhaps by disallowing more than one configuration or + * by limiting configuration choices (like the pxa2xx). + */ +static int +zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) +{ + int result = 0; + struct usb_gadget *gadget = dev->gadget; + + if (number == dev->config) + return 0; + + if (gadget_is_sa1100 (gadget) && dev->config) { + /* tx fifo is full, but we can't clear it...*/ + INFO (dev, "can't change configurations\n"); + return -ESPIPE; + } + zero_reset_config (dev); + + switch (number) { + case CONFIG_SOURCE_SINK: + result = set_source_sink_config (dev, gfp_flags); + break; + case CONFIG_LOOPBACK: + result = set_loopback_config (dev, gfp_flags); + break; + default: + result = -EINVAL; + /* FALL THROUGH */ + case 0: + return result; + } + + if (!result && (!dev->in_ep || !dev->out_ep)) + result = -ENODEV; + if (result) + zero_reset_config (dev); + else { + char *speed; + + switch (gadget->speed) { + case USB_SPEED_LOW: speed = "low"; break; + case USB_SPEED_FULL: speed = "full"; break; + case USB_SPEED_HIGH: speed = "high"; break; + default: speed = "?"; break; + } + + dev->config = number; + INFO (dev, "%s speed config #%d: %s\n", speed, number, + (number == CONFIG_SOURCE_SINK) + ? source_sink : loopback); + } + return result; +} + +/*-------------------------------------------------------------------------*/ + +static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) + DBG ((struct zero_dev *) ep->driver_data, + "setup complete --> %d, %d/%d\n", + req->status, req->actual, req->length); +} + +/* + * The setup() callback implements all the ep0 functionality that's + * not handled lower down, in hardware or the hardware driver (like + * device and endpoint feature flags, and their status). It's all + * housekeeping for the gadget function we're implementing. Most of + * the work is in config-specific setup. + */ +static int +zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +{ + struct zero_dev *dev = get_gadget_data (gadget); + struct usb_request *req = dev->req; + int value = -EOPNOTSUPP; + u16 w_index = ctrl->wIndex; + u16 w_value = ctrl->wValue; + u16 w_length = ctrl->wLength; + + /* usually this stores reply data in the pre-allocated ep0 buffer, + * but config change events will reconfigure hardware. + */ + req->zero = 0; + switch (ctrl->bRequest) { + + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != USB_DIR_IN) + goto unknown; + switch (w_value >> 8) { + + case USB_DT_DEVICE: + value = min (w_length, (u16) sizeof device_desc); + memcpy (req->buf, &device_desc, value); + break; +#ifdef CONFIG_USB_GADGET_DUALSPEED + case USB_DT_DEVICE_QUALIFIER: + if (!gadget->is_dualspeed) + break; + value = min (w_length, (u16) sizeof dev_qualifier); + memcpy (req->buf, &dev_qualifier, value); + break; + + case USB_DT_OTHER_SPEED_CONFIG: + if (!gadget->is_dualspeed) + break; + // FALLTHROUGH +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + case USB_DT_CONFIG: + value = config_buf (gadget, req->buf, + w_value >> 8, + w_value & 0xff); + if (value >= 0) + value = min (w_length, (u16) value); + break; + + case USB_DT_STRING: + /* wIndex == language code. + * this driver only handles one language, you can + * add string tables for other languages, using + * any UTF-8 characters + */ + value = usb_gadget_get_string (&stringtab, + w_value & 0xff, req->buf); + if (value >= 0) + value = min (w_length, (u16) value); + break; + } + break; + + /* currently two configs, two speeds */ + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) + goto unknown; + if (gadget->a_hnp_support) + DBG (dev, "HNP available\n"); + else if (gadget->a_alt_hnp_support) + DBG (dev, "HNP needs a different root port\n"); + else + VDBG (dev, "HNP inactive\n"); + spin_lock (&dev->lock); + value = zero_set_config (dev, w_value, GFP_ATOMIC); + spin_unlock (&dev->lock); + break; + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != USB_DIR_IN) + goto unknown; + *(u8 *)req->buf = dev->config; + value = min (w_length, (u16) 1); + break; + + /* until we add altsetting support, or other interfaces, + * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) + * and already killed pending endpoint I/O. + */ + case USB_REQ_SET_INTERFACE: + if (ctrl->bRequestType != USB_RECIP_INTERFACE) + goto unknown; + spin_lock (&dev->lock); + if (dev->config && w_index == 0 && w_value == 0) { + u8 config = dev->config; + + /* resets interface configuration, forgets about + * previous transaction state (queued bufs, etc) + * and re-inits endpoint state (toggle etc) + * no response queued, just zero status == success. + * if we had more than one interface we couldn't + * use this "reset the config" shortcut. + */ + zero_reset_config (dev); + zero_set_config (dev, config, GFP_ATOMIC); + value = 0; + } + spin_unlock (&dev->lock); + break; + case USB_REQ_GET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) + goto unknown; + if (!dev->config) + break; + if (w_index != 0) { + value = -EDOM; + break; + } + *(u8 *)req->buf = 0; + value = min (w_length, (u16) 1); + break; + + /* + * These are the same vendor-specific requests supported by + * Intel's USB 2.0 compliance test devices. We exceed that + * device spec by allowing multiple-packet requests. + */ + case 0x5b: /* control WRITE test -- fill the buffer */ + if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) + goto unknown; + if (w_value || w_index) + break; + /* just read that many bytes into the buffer */ + if (w_length > USB_BUFSIZ) + break; + value = w_length; + break; + case 0x5c: /* control READ test -- return the buffer */ + if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) + goto unknown; + if (w_value || w_index) + break; + /* expect those bytes are still in the buffer; send back */ + if (w_length > USB_BUFSIZ + || w_length != req->length) + break; + value = w_length; + break; + + default: +unknown: + VDBG (dev, + "unknown control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + } + + /* respond with data transfer before status phase? */ + if (value >= 0) { + req->length = value; + req->zero = value < w_length; + value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG (dev, "ep_queue --> %d\n", value); + req->status = 0; + zero_setup_complete (gadget->ep0, req); + } + } + + /* device either stalls (value < 0) or reports success */ + return value; +} + +static void +zero_disconnect (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + unsigned long flags; + + spin_lock_irqsave (&dev->lock, flags); + zero_reset_config (dev); + + /* a more significant application might have some non-usb + * activities to quiesce here, saving resources like power + * or pushing the notification up a network stack. + */ + spin_unlock_irqrestore (&dev->lock, flags); + + /* next we may get setup() calls to enumerate new connections; + * or an unbind() during shutdown (including removing module). + */ +} + +static void +zero_autoresume (unsigned long _dev) +{ + struct zero_dev *dev = (struct zero_dev *) _dev; + int status; + + /* normally the host would be woken up for something + * more significant than just a timer firing... + */ + if (dev->gadget->speed != USB_SPEED_UNKNOWN) { + status = usb_gadget_wakeup (dev->gadget); + DBG (dev, "wakeup --> %d\n", status); + } +} + +/*-------------------------------------------------------------------------*/ + +static void +zero_unbind (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + + DBG (dev, "unbind\n"); + + /* we've already been disconnected ... no i/o is active */ + if (dev->req) + free_ep_req (gadget->ep0, dev->req); + del_timer_sync (&dev->resume); + kfree (dev); + set_gadget_data (gadget, NULL); +} + +static int +zero_bind (struct usb_gadget *gadget) +{ + struct zero_dev *dev; + struct usb_ep *ep; + + /* Bulk-only drivers like this one SHOULD be able to + * autoconfigure on any sane usb controller driver, + * but there may also be important quirks to address. + */ + usb_ep_autoconfig_reset (gadget); + ep = usb_ep_autoconfig (gadget, &fs_source_desc); + if (!ep) { +autoconf_fail: + printk (KERN_ERR "%s: can't autoconfigure on %s\n", + shortname, gadget->name); + return -ENODEV; + } + EP_IN_NAME = ep->name; + ep->driver_data = ep; /* claim */ + + ep = usb_ep_autoconfig (gadget, &fs_sink_desc); + if (!ep) + goto autoconf_fail; + EP_OUT_NAME = ep->name; + ep->driver_data = ep; /* claim */ + + + /* + * DRIVER POLICY CHOICE: you may want to do this differently. + * One thing to avoid is reusing a bcdDevice revision code + * with different host-visible configurations or behavior + * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc + */ + if (gadget_is_net2280 (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); + } else if (gadget_is_pxa (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203); +#if 0 + } else if (gadget_is_sh(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204); + /* SH has only one configuration; see "loopdefault" */ + device_desc.bNumConfigurations = 1; + /* FIXME make 1 == default.bConfigurationValue */ +#endif + } else if (gadget_is_sa1100 (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205); + } else if (gadget_is_goku (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206); + } else if (gadget_is_mq11xx (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207); + } else if (gadget_is_omap (gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208); + } else if (gadget_is_lh7a40x(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209); + } else if (gadget_is_n9604(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210); + } else if (gadget_is_pxa27x(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211); + } else if (gadget_is_s3c2410(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212); + } else if (gadget_is_at91(gadget)) { + device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213); + } else { + /* gadget zero is so simple (for now, no altsettings) that + * it SHOULD NOT have problems with bulk-capable hardware. + * so warn about unrcognized controllers, don't panic. + * + * things like configuration and altsetting numbering + * can need hardware-specific attention though. + */ + printk (KERN_WARNING "%s: controller '%s' not recognized\n", + shortname, gadget->name); + device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999); + } + + + /* ok, we made sense of the hardware ... */ + dev = kmalloc (sizeof *dev, SLAB_KERNEL); + if (!dev) + return -ENOMEM; + memset (dev, 0, sizeof *dev); + spin_lock_init (&dev->lock); + dev->gadget = gadget; + set_gadget_data (gadget, dev); + + /* preallocate control response and buffer */ + dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); + if (!dev->req) + goto enomem; + dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, + &dev->req->dma, GFP_KERNEL); + if (!dev->req->buf) + goto enomem; + + dev->req->complete = zero_setup_complete; + + device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + /* assume ep0 uses the same value for both speeds ... */ + dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; + + /* and that all endpoints are dual-speed */ + hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; + hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; +#endif + + if (gadget->is_otg) { + otg_descriptor.bmAttributes |= USB_OTG_HNP, + source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + if (gadget->is_otg) { + otg_descriptor.bmAttributes |= USB_OTG_HNP, + source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + usb_gadget_set_selfpowered (gadget); + + init_timer (&dev->resume); + dev->resume.function = zero_autoresume; + dev->resume.data = (unsigned long) dev; + if (autoresume) { + source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + gadget->ep0->driver_data = dev; + + INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); + INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, + EP_OUT_NAME, EP_IN_NAME); + + snprintf (manufacturer, sizeof manufacturer, "%s %s with %s", + system_utsname.sysname, system_utsname.release, + gadget->name); + + return 0; + +enomem: + zero_unbind (gadget); + return -ENOMEM; +} + +/*-------------------------------------------------------------------------*/ + +static void +zero_suspend (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + + if (gadget->speed == USB_SPEED_UNKNOWN) + return; + + if (autoresume) { + mod_timer (&dev->resume, jiffies + (HZ * autoresume)); + DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); + } else + DBG (dev, "suspend\n"); +} + +static void +zero_resume (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + + DBG (dev, "resume\n"); + del_timer (&dev->resume); +} + + +/*-------------------------------------------------------------------------*/ + +static struct usb_gadget_driver zero_driver = { +#ifdef CONFIG_USB_GADGET_DUALSPEED + .speed = USB_SPEED_HIGH, +#else + .speed = USB_SPEED_FULL, +#endif + .function = (char *) longname, + .bind = zero_bind, + .unbind = zero_unbind, + + .setup = zero_setup, + .disconnect = zero_disconnect, + + .suspend = zero_suspend, + .resume = zero_resume, + + .driver = { + .name = (char *) shortname, + // .shutdown = ... + // .suspend = ... + // .resume = ... + }, +}; + +MODULE_AUTHOR ("David Brownell"); +MODULE_LICENSE ("Dual BSD/GPL"); + + +static int __init init (void) +{ + /* a real value would likely come through some id prom + * or module option. this one takes at least two packets. + */ + strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial); + + return usb_gadget_register_driver (&zero_driver); +} +module_init (init); + +static void __exit cleanup (void) +{ + usb_gadget_unregister_driver (&zero_driver); +} +module_exit (cleanup); + |