Merge tag 'usb-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.17 merge window

Surprisingly enough, while a big set of patches, the majority is
composed of cleanups (using devm_*, fixing sparse errors, moving
code around, adding const, etc).

The highlights are addition of new support for PLX USB338x devices,
and support for USB 2.0-only configurations of the DWC3 IP core.

Signed-of-by: Felipe Balbi <balbi@ti.com>

4 files changed, 134 insertions, 109 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index eb69eb9..b769c1f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -386,6 +386,13 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	}
 	dwc->revision = reg;
 
+	/* Handle USB2.0-only core configuration */
+	if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+			DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
+		if (dwc->maximum_speed == USB_SPEED_SUPER)
+			dwc->maximum_speed = USB_SPEED_HIGH;
+	}
+
 	/* issue device SoftReset too */
 	timeout = jiffies + msecs_to_jiffies(500);
 	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
@@ -656,6 +663,31 @@ static int dwc3_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	dwc->xhci_resources[0].start = res->start;
+	dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
+					DWC3_XHCI_REGS_END;
+	dwc->xhci_resources[0].flags = res->flags;
+	dwc->xhci_resources[0].name = res->name;
+
+	res->start += DWC3_GLOBALS_REGS_START;
+
+	/*
+	 * Request memory region but exclude xHCI regs,
+	 * since it will be requested by the xhci-plat driver.
+	 */
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	dwc->regs	= regs;
+	dwc->regs_size	= resource_size(res);
+	/*
+	 * restore res->start back to its original value so that,
+	 * in case the probe is deferred, we don't end up getting error in
+	 * request the memory region the next time probe is called.
+	 */
+	res->start -= DWC3_GLOBALS_REGS_START;
+
 	if (node) {
 		dwc->maximum_speed = of_usb_get_maximum_speed(node);
 
@@ -676,28 +708,9 @@ static int dwc3_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	dwc->xhci_resources[0].start = res->start;
-	dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
-					DWC3_XHCI_REGS_END;
-	dwc->xhci_resources[0].flags = res->flags;
-	dwc->xhci_resources[0].name = res->name;
-
-	res->start += DWC3_GLOBALS_REGS_START;
-
-	/*
-	 * Request memory region but exclude xHCI regs,
-	 * since it will be requested by the xhci-plat driver.
-	 */
-	regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(regs))
-		return PTR_ERR(regs);
-
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
 
-	dwc->regs	= regs;
-	dwc->regs_size	= resource_size(res);
-
 	dev->dma_mask	= dev->parent->dma_mask;
 	dev->dma_parms	= dev->parent->dma_parms;
 	dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 57332e3..48fb264 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -191,6 +191,19 @@
 #define DWC3_GHWPARAMS1_PWROPT(n)	((n) << 24)
 #define DWC3_GHWPARAMS1_PWROPT_MASK	DWC3_GHWPARAMS1_PWROPT(3)
 
+/* Global HWPARAMS3 Register */
+#define DWC3_GHWPARAMS3_SSPHY_IFC(n)		((n) & 3)
+#define DWC3_GHWPARAMS3_SSPHY_IFC_DIS		0
+#define DWC3_GHWPARAMS3_SSPHY_IFC_ENA		1
+#define DWC3_GHWPARAMS3_HSPHY_IFC(n)		(((n) & (3 << 2)) >> 2)
+#define DWC3_GHWPARAMS3_HSPHY_IFC_DIS		0
+#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI		1
+#define DWC3_GHWPARAMS3_HSPHY_IFC_ULPI		2
+#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI	3
+#define DWC3_GHWPARAMS3_FSPHY_IFC(n)		(((n) & (3 << 4)) >> 4)
+#define DWC3_GHWPARAMS3_FSPHY_IFC_DIS		0
+#define DWC3_GHWPARAMS3_FSPHY_IFC_ENA		1
+
 /* Global HWPARAMS4 Register */
 #define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n)	(((n) & (0x0f << 13)) >> 13)
 #define DWC3_MAX_HIBER_SCRATCHBUFS		15
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 07a736a..ef4936f 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -77,10 +77,6 @@
 #define USBOTGSS_DEV_EBC_EN			0x0110
 #define USBOTGSS_DEBUG_OFFSET			0x0600
 
-/* REVISION REGISTER */
-#define USBOTGSS_REVISION_XMAJOR(reg)		((reg >> 8) & 0x7)
-#define USBOTGSS_REVISION_XMAJOR1		1
-#define USBOTGSS_REVISION_XMAJOR2		2
 /* SYSCONFIG REGISTER */
 #define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)
 
@@ -129,7 +125,6 @@ struct dwc3_omap {
 	u32			irq_eoi_offset;
 	u32			debug_offset;
 	u32			irq0_offset;
-	u32			revision;
 
 	u32			dma_status:1;
 
@@ -383,6 +378,87 @@ static int dwc3_omap_vbus_notifier(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
+static void dwc3_omap_map_offset(struct dwc3_omap *omap)
+{
+	struct device_node	*node = omap->dev->of_node;
+
+	/*
+	 * Differentiate between OMAP5 and AM437x.
+	 *
+	 * For OMAP5(ES2.0) and AM437x wrapper revision is same, even
+	 * though there are changes in wrapper register offsets.
+	 *
+	 * Using dt compatible to differentiate AM437x.
+	 */
+	if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
+		omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+		omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+		omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+		omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+		omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+	}
+}
+
+static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap)
+{
+	u32			reg;
+	struct device_node	*node = omap->dev->of_node;
+	int			utmi_mode = 0;
+
+	reg = dwc3_omap_read_utmi_status(omap);
+
+	of_property_read_u32(node, "utmi-mode", &utmi_mode);
+
+	switch (utmi_mode) {
+	case DWC3_OMAP_UTMI_MODE_SW:
+		reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+		break;
+	case DWC3_OMAP_UTMI_MODE_HW:
+		reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+		break;
+	default:
+		dev_dbg(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode);
+	}
+
+	dwc3_omap_write_utmi_status(omap, reg);
+}
+
+static int dwc3_omap_extcon_register(struct dwc3_omap *omap)
+{
+	u32			ret;
+	struct device_node	*node = omap->dev->of_node;
+	struct extcon_dev	*edev;
+
+	if (of_property_read_bool(node, "extcon")) {
+		edev = extcon_get_edev_by_phandle(omap->dev, 0);
+		if (IS_ERR(edev)) {
+			dev_vdbg(omap->dev, "couldn't get extcon device\n");
+			return -EPROBE_DEFER;
+		}
+
+		omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
+		ret = extcon_register_interest(&omap->extcon_vbus_dev,
+					       edev->name, "USB",
+					       &omap->vbus_nb);
+		if (ret < 0)
+			dev_vdbg(omap->dev, "failed to register notifier for USB\n");
+
+		omap->id_nb.notifier_call = dwc3_omap_id_notifier;
+		ret = extcon_register_interest(&omap->extcon_id_dev,
+					       edev->name, "USB-HOST",
+					       &omap->id_nb);
+		if (ret < 0)
+			dev_vdbg(omap->dev, "failed to register notifier for USB-HOST\n");
+
+		if (extcon_get_cable_state(edev, "USB") == true)
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+		if (extcon_get_cable_state(edev, "USB-HOST") == true)
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+	}
+
+	return 0;
+}
+
 static int dwc3_omap_probe(struct platform_device *pdev)
 {
 	struct device_node	*node = pdev->dev.of_node;
@@ -390,15 +466,11 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	struct dwc3_omap	*omap;
 	struct resource		*res;
 	struct device		*dev = &pdev->dev;
-	struct extcon_dev	*edev;
 	struct regulator	*vbus_reg = NULL;
 
 	int			ret;
 	int			irq;
 
-	int			utmi_mode = 0;
-	int			x_major;
-
 	u32			reg;
 
 	void __iomem		*base;
@@ -448,58 +520,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
-	omap->revision = reg;
-	x_major = USBOTGSS_REVISION_XMAJOR(reg);
-
-	/* Differentiate between OMAP5 and AM437x */
-	switch (x_major) {
-	case USBOTGSS_REVISION_XMAJOR1:
-	case USBOTGSS_REVISION_XMAJOR2:
-		omap->irq_eoi_offset = 0;
-		omap->irq0_offset = 0;
-		omap->irqmisc_offset = 0;
-		omap->utmi_otg_offset = 0;
-		omap->debug_offset = 0;
-		break;
-	default:
-		/* Default to the latest revision */
-		omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
-		omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
-		omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
-		omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
-		omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
-		break;
-	}
-
-	/* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
-	 * changes in wrapper registers, Using dt compatible for aegis
-	 */
-
-	if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
-		omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
-		omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
-		omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
-		omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
-		omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
-	}
-
-	reg = dwc3_omap_read_utmi_status(omap);
-
-	of_property_read_u32(node, "utmi-mode", &utmi_mode);
-
-	switch (utmi_mode) {
-	case DWC3_OMAP_UTMI_MODE_SW:
-		reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-		break;
-	case DWC3_OMAP_UTMI_MODE_HW:
-		reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-		break;
-	default:
-		dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode);
-	}
-
-	dwc3_omap_write_utmi_status(omap, reg);
+	dwc3_omap_map_offset(omap);
+	dwc3_omap_set_utmi_mode(omap);
 
 	/* check the DMA Status */
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
@@ -515,31 +537,9 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	dwc3_omap_enable_irqs(omap);
 
-	if (of_property_read_bool(node, "extcon")) {
-		edev = extcon_get_edev_by_phandle(dev, 0);
-		if (IS_ERR(edev)) {
-			dev_vdbg(dev, "couldn't get extcon device\n");
-			ret = -EPROBE_DEFER;
-			goto err2;
-		}
-
-		omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
-		ret = extcon_register_interest(&omap->extcon_vbus_dev,
-			edev->name, "USB", &omap->vbus_nb);
-		if (ret < 0)
-			dev_vdbg(dev, "failed to register notifier for USB\n");
-		omap->id_nb.notifier_call = dwc3_omap_id_notifier;
-		ret = extcon_register_interest(&omap->extcon_id_dev, edev->name,
-					 "USB-HOST", &omap->id_nb);
-		if (ret < 0)
-			dev_vdbg(dev,
-				"failed to register notifier for USB-HOST\n");
-
-		if (extcon_get_cable_state(edev, "USB") == true)
-			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
-		if (extcon_get_cable_state(edev, "USB-HOST") == true)
-			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
-	}
+	ret = dwc3_omap_extcon_register(omap);
+	if (ret < 0)
+		goto err2;
 
 	ret = of_platform_populate(node, NULL, NULL, dev);
 	if (ret) {
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index dab7927..349cacc 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1971,8 +1971,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 }
 
 static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
-		struct dwc3_ep *dep, const struct dwc3_event_depevt *event,
-		int start_new)
+		struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
 {
 	unsigned		status = 0;
 	int			clean_busy;
@@ -2039,7 +2038,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 			return;
 		}
 
-		dwc3_endpoint_transfer_complete(dwc, dep, event, 1);
+		dwc3_endpoint_transfer_complete(dwc, dep, event);
 		break;
 	case DWC3_DEPEVT_XFERINPROGRESS:
 		if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
@@ -2048,7 +2047,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 			return;
 		}
 
-		dwc3_endpoint_transfer_complete(dwc, dep, event, 0);
+		dwc3_endpoint_transfer_complete(dwc, dep, event);
 		break;
 	case DWC3_DEPEVT_XFERNOTREADY:
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {