Revert "USB: don't explicitly reenable root-hub status interrupts"

This reverts commit e872154921a6b5256a3c412dd69158ac0b135176.

Andrey Borzenkov reports that it resulted in a totally hung machine for
him when loading the OHCI driver.  Extensive netconsole capture with
SysRq output shows that modprobe gets stuck in ohci_hub_status_data()
when probing and enabling the OHCI controller, see for example

	http://lkml.org/lkml/2008/7/5/236

for an analysis.

The problem appears to be an interrupt flood triggered by the commit
that gets reverted, and Andrey confirmed that the revert makes things
work for him again.

Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 20 insertions, 0 deletions

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 7158dbb..42a4364 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -924,6 +924,15 @@ static int register_root_hub(struct usb_hcd *hcd)
 	return retval;
 }
 
+void usb_enable_root_hub_irq (struct usb_bus *bus)
+{
+	struct usb_hcd *hcd;
+
+	hcd = container_of (bus, struct usb_hcd, self);
+	if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
+		hcd->driver->hub_irq_enable (hcd);
+}
+
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index a0bf5df..b9de156 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -210,6 +210,8 @@ struct hc_driver {
 	int	(*bus_suspend)(struct usb_hcd *);
 	int	(*bus_resume)(struct usb_hcd *);
 	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
+	void	(*hub_irq_enable)(struct usb_hcd *);
+		/* Needed only if port-change IRQs are level-triggered */
 
 		/* force handover of high-speed port to full-speed companion */
 	void	(*relinquish_port)(struct usb_hcd *, int);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 512d2d5..4cfe32a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2073,6 +2073,8 @@ int usb_port_resume(struct usb_device *udev)
 	}
 
 	clear_bit(port1, hub->busy_bits);
+	if (!hub->hdev->parent && !hub->busy_bits[0])
+		usb_enable_root_hub_irq(hub->hdev->bus);
 
 	if (status == 0)
 		status = finish_port_resume(udev);
@@ -3002,6 +3004,11 @@ static void hub_events(void)
 
 		hub->activating = 0;
 
+		/* If this is a root hub, tell the HCD it's okay to
+		 * re-enable port-change interrupts now. */
+		if (!hdev->parent && !hub->busy_bits[0])
+			usb_enable_root_hub_irq(hdev->bus);
+
 loop_autopm:
 		/* Allow autosuspend if we're not going to run again */
 		if (list_empty(&hub->event_list))
@@ -3227,6 +3234,8 @@ int usb_reset_device(struct usb_device *udev)
 			break;
 	}
 	clear_bit(port1, parent_hub->busy_bits);
+	if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+		usb_enable_root_hub_irq(parent_hdev->bus);
 
 	if (ret < 0)
 		goto re_enumerate;