summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorJoe Schultz <jschultz@xes-inc.com>2014-02-11 18:30:01 -0600
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-02-13 10:02:19 -0800
commit45a7bd635930baa960b6817674c64bdfb8f39570 (patch)
tree56f35c5f9a6b798fea94d06934e736bd18e4c601 /drivers/tty
parente2613be5093d04e6589924d36a1e363eef3c87c7 (diff)
downloadop-kernel-dev-45a7bd635930baa960b6817674c64bdfb8f39570.zip
op-kernel-dev-45a7bd635930baa960b6817674c64bdfb8f39570.tar.gz
serial: 8250: Support XR17V35x fraction divisor
The Exar XR17V35x family of UARTs have an additional fractional divisor register (DLD) which was not being used. Calculate and set this register for these devices to reduce their baud rate error. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_core.c18
1 files changed, 18 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 61ecd70..69932b7 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2433,6 +2433,24 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
serial_dl_write(up, quot);
/*
+ * XR17V35x UARTs have an extra fractional divisor register (DLD)
+ *
+ * We need to recalculate all of the registers, because DLM and DLL
+ * are already rounded to a whole integer.
+ *
+ * When recalculating we use a 32x clock instead of a 16x clock to
+ * allow 1-bit for rounding in the fractional part.
+ */
+ if (up->port.type == PORT_XR17V35X) {
+ unsigned int baud_x32 = (port->uartclk * 2) / baud;
+ u16 quot = baud_x32 / 32;
+ u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2);
+
+ serial_dl_write(up, quot);
+ serial_port_out(port, 0x2, quot_frac & 0xf);
+ }
+
+ /*
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
* is written without DLAB set, this mode will be disabled.
*/
OpenPOWER on IntegriCloud