Merge tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here's the tty and serial driver patches for 4.2-rc1.

  A number of individual driver updates, some code cleanups, and other
  minor things, full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits)
  Doc: serial-rs485.txt: update RS485 driver interface
  Doc: tty.txt: remove mention of the BKL
  MAINTAINERS: tty: add serial docs directory
  serial: sprd: check for NULL after calling devm_clk_get
  serial: 8250_pci: Correct uartclk for xr17v35x expansion chips
  serial: 8250_pci: Add support for 12 port Exar boards
  serial: 8250_uniphier: add bindings document for UniPhier UART
  serial: core: cleanup in uart_get_baud_rate()
  serial: stm32-usart: Add STM32 USART Driver
  tty/serial: kill off set_irq_flags usage
  tty: move linux/gsmmux.h to uapi
  doc: dt: add documentation for nxp,lpc1850-uart
  serial: 8250: add LPC18xx/43xx UART driver
  serial: 8250_uniphier: add UniPhier serial driver
  serial: 8250_dw: support ACPI platforms with integrated DMA engine
  serial: of_serial: check the return value of clk_prepare_enable()
  serial: of_serial: use devm_clk_get() instead of clk_get()
  serial: earlycon: Add support for big-endian MMIO accesses
  serial: sirf: use hrtimer for data rx
  serial: sirf: correct the fifo empty_bit
  ...

67 files changed, 3062 insertions, 1636 deletions

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index b2d7600..e53d9a5 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -966,9 +966,7 @@ static void rs_throttle(struct tty_struct * tty)
 	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 #ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-
-	printk("throttle %s: %d....\n", tty_name(tty, buf),
+	printk("throttle %s: %d....\n", tty_name(tty),
 	       tty->ldisc.chars_in_buffer(tty));
 #endif
 
@@ -991,9 +989,7 @@ static void rs_unthrottle(struct tty_struct * tty)
 	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 #ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-
-	printk("unthrottle %s: %d....\n", tty_name(tty, buf),
+	printk("unthrottle %s: %d....\n", tty_name(tty),
 	       tty->ldisc.chars_in_buffer(tty));
 #endif
 
@@ -1786,7 +1782,8 @@ static int __exit amiga_serial_remove(struct platform_device *pdev)
 	struct serial_state *state = platform_get_drvdata(pdev);
 
 	/* printk("Unloading %s: version %s\n", serial_name, serial_version); */
-	if ((error = tty_unregister_driver(serial_driver)))
+	error = tty_unregister_driver(serial_driver);
+	if (error)
 		printk("SERIAL: failed to unregister serial driver (%d)\n",
 		       error);
 	put_tty_driver(serial_driver);
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index fd66f57..87f6578 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -2861,9 +2861,7 @@ static void cy_throttle(struct tty_struct *tty)
 	unsigned long flags;
 
 #ifdef CY_DEBUG_THROTTLE
-	char buf[64];
-
-	printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf),
+	printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty),
 			tty->ldisc.chars_in_buffer(tty), info->line);
 #endif
 
@@ -2902,10 +2900,8 @@ static void cy_unthrottle(struct tty_struct *tty)
 	unsigned long flags;
 
 #ifdef CY_DEBUG_THROTTLE
-	char buf[64];
-
 	printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
-		tty_name(tty, buf), tty_chars_in_buffer(tty), info->line);
+		tty_name(tty), tty_chars_in_buffer(tty), info->line);
 #endif
 
 	if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 8902f9b..2509d05 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -42,13 +42,6 @@ config HVC_RTAS
 	help
 	  IBM Console device driver which makes use of RTAS
 
-config HVC_BEAT
-	bool "Toshiba's Beat Hypervisor Console support"
-	depends on PPC_CELLEB
-	select HVC_DRIVER
-	help
-	  Toshiba's Cell Reference Set Beat Console device driver
-
 config HVC_IUCV
 	bool "z/VM IUCV Hypervisor console support (VM only)"
 	depends on S390
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index 4ca3723..6a2702b 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -4,7 +4,6 @@ obj-$(CONFIG_HVC_OLD_HVSI)	+= hvsi.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_TILE)		+= hvc_tile.o
 obj-$(CONFIG_HVC_DCC)		+= hvc_dcc.o
-obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
 obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
 obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
diff --git a/drivers/tty/hvc/hvc_beat.c b/drivers/tty/hvc/hvc_beat.c
deleted file mode 100644
index 1560d23..0000000
--- a/drivers/tty/hvc/hvc_beat.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Beat hypervisor console driver
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/char/hvc_rtas.c:
- * (C) Copyright IBM Corporation 2001-2005
- * (C) Copyright Red Hat, Inc. 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/console.h>
-#include <asm/prom.h>
-#include <asm/hvconsole.h>
-#include <asm/firmware.h>
-
-#include "hvc_console.h"
-
-extern int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *);
-extern int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t);
-
-struct hvc_struct *hvc_beat_dev = NULL;
-
-/* bug: only one queue is available regardless of vtermno */
-static int hvc_beat_get_chars(uint32_t vtermno, char *buf, int cnt)
-{
-	static unsigned char q[sizeof(unsigned long) * 2]
-		__attribute__((aligned(sizeof(unsigned long))));
-	static int qlen = 0;
-	u64 got;
-
-again:
-	if (qlen) {
-		if (qlen > cnt) {
-			memcpy(buf, q, cnt);
-			qlen -= cnt;
-			memmove(q + cnt, q, qlen);
-			return cnt;
-		} else {	/* qlen <= cnt */
-			int	r;
-
-			memcpy(buf, q, qlen);
-			r = qlen;
-			qlen = 0;
-			return r;
-		}
-	}
-	if (beat_get_term_char(vtermno, &got,
-		((u64 *)q), ((u64 *)q) + 1) == 0) {
-		qlen = got;
-		goto again;
-	}
-	return 0;
-}
-
-static int hvc_beat_put_chars(uint32_t vtermno, const char *buf, int cnt)
-{
-	unsigned long kb[2];
-	int rest, nlen;
-
-	for (rest = cnt; rest > 0; rest -= nlen) {
-		nlen = (rest > 16) ? 16 : rest;
-		memcpy(kb, buf, nlen);
-		beat_put_term_char(vtermno, nlen, kb[0], kb[1]);
-		buf += nlen;
-	}
-	return cnt;
-}
-
-static const struct hv_ops hvc_beat_get_put_ops = {
-	.get_chars = hvc_beat_get_chars,
-	.put_chars = hvc_beat_put_chars,
-};
-
-static int hvc_beat_useit = 1;
-
-static int hvc_beat_config(char *p)
-{
-	hvc_beat_useit = simple_strtoul(p, NULL, 0);
-	return 0;
-}
-
-static int __init hvc_beat_console_init(void)
-{
-	if (hvc_beat_useit && of_machine_is_compatible("Beat")) {
-		hvc_instantiate(0, 0, &hvc_beat_get_put_ops);
-	}
-	return 0;
-}
-
-/* temp */
-static int __init hvc_beat_init(void)
-{
-	struct hvc_struct *hp;
-
-	if (!firmware_has_feature(FW_FEATURE_BEAT))
-		return -ENODEV;
-
-	hp = hvc_alloc(0, 0, &hvc_beat_get_put_ops, 16);
-	if (IS_ERR(hp))
-		return PTR_ERR(hp);
-	hvc_beat_dev = hp;
-	return 0;
-}
-
-static void __exit hvc_beat_exit(void)
-{
-	if (hvc_beat_dev)
-		hvc_remove(hvc_beat_dev);
-}
-
-module_init(hvc_beat_init);
-module_exit(hvc_beat_exit);
-
-__setup("hvc_beat=", hvc_beat_config);
-
-console_initcall(hvc_beat_console_init);
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 4fcec1d..4e9c4cc 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -319,7 +319,8 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
 	int rc;
 
 	/* Auto increments kref reference if found. */
-	if (!(hp = hvc_get_by_index(tty->index)))
+	hp = hvc_get_by_index(tty->index);
+	if (!hp)
 		return -ENODEV;
 
 	tty->driver_data = hp;
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 81ff7e1..f7ff97c 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1044,8 +1044,8 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address,
 	 * It is possible that the vty-server was removed between the time that
 	 * the conn was registered and now.
 	 */
-	if (!(rc = request_irq(irq, &hvcs_handle_interrupt,
-				0, "ibmhvcs", hvcsd))) {
+	rc = request_irq(irq, &hvcs_handle_interrupt, 0, "ibmhvcs", hvcsd);
+	if (!rc) {
 		/*
 		 * It is possible the vty-server was removed after the irq was
 		 * requested but before we have time to enable interrupts.
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 2c34c32..382d3fc 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -161,7 +161,7 @@ struct gsm_dlci {
 	struct net_device *net; /* network interface, if created */
 };
 
-/* DLCI 0, 62/63 are special or reseved see gsmtty_open */
+/* DLCI 0, 62/63 are special or reserved see gsmtty_open */
 
 #define NUM_DLCI		64
 
@@ -2274,7 +2274,6 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	const unsigned char *dp;
 	char *f;
 	int i;
-	char buf[64];
 	char flags = TTY_NORMAL;
 
 	if (debug & 4)
@@ -2296,7 +2295,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 			break;
 		default:
 			WARN_ONCE(1, "%s: unknown flag %d\n",
-			       tty_name(tty, buf), flags);
+			       tty_name(tty), flags);
 			break;
 		}
 	}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 396344c..c9c27f6 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1190,13 +1190,12 @@ static void n_tty_receive_break(struct tty_struct *tty)
 static void n_tty_receive_overrun(struct tty_struct *tty)
 {
 	struct n_tty_data *ldata = tty->disc_data;
-	char buf[64];
 
 	ldata->num_overrun++;
 	if (time_after(jiffies, ldata->overrun_time + HZ) ||
 			time_after(ldata->overrun_time, jiffies)) {
 		printk(KERN_WARNING "%s: %d input overrun(s)\n",
-			tty_name(tty, buf),
+			tty_name(tty),
 			ldata->num_overrun);
 		ldata->overrun_time = jiffies;
 		ldata->num_overrun = 0;
@@ -1471,8 +1470,6 @@ static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
 static void
 n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
 {
-	char buf[64];
-
 	switch (flag) {
 	case TTY_BREAK:
 		n_tty_receive_break(tty);
@@ -1486,7 +1483,7 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag)
 		break;
 	default:
 		printk(KERN_ERR "%s: unknown flag %d\n",
-		       tty_name(tty, buf), flag);
+		       tty_name(tty), flag);
 		break;
 	}
 }
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 74885af..80f9de9 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -140,8 +140,8 @@ static int debug;
 #define R_FCR		0x0000	/* Flow Control Register */
 #define R_IER		0x0004	/* Interrupt Enable Register */
 
-#define CONFIG_MAGIC	0xEFEFFEFE
-#define TOGGLE_VALID	0x0000
+#define NOZOMI_CONFIG_MAGIC	0xEFEFFEFE
+#define TOGGLE_VALID		0x0000
 
 /* Definition of interrupt tokens */
 #define MDM_DL1		0x0001
@@ -660,9 +660,9 @@ static int nozomi_read_config_table(struct nozomi *dc)
 	read_mem32((u32 *) &dc->config_table, dc->base_addr + 0,
 						sizeof(struct config_table));
 
-	if (dc->config_table.signature != CONFIG_MAGIC) {
+	if (dc->config_table.signature != NOZOMI_CONFIG_MAGIC) {
 		dev_err(&dc->pdev->dev, "ConfigTable Bad! 0x%08X != 0x%08X\n",
-			dc->config_table.signature, CONFIG_MAGIC);
+			dc->config_table.signature, NOZOMI_CONFIG_MAGIC);
 		return 0;
 	}
 
diff --git a/drivers/tty/rocket.h b/drivers/tty/rocket.h
index ec863f3..c11a939 100644
--- a/drivers/tty/rocket.h
+++ b/drivers/tty/rocket.h
@@ -44,7 +44,7 @@ struct rocket_version {
 #define ROCKET_HUP_NOTIFY	0x00000004
 #define ROCKET_SPLIT_TERMIOS	0x00000008
 #define ROCKET_SPD_MASK		0x00000070
-#define ROCKET_SPD_HI		0x00000010	/* Use 56000 instead of 38400 bps */
+#define ROCKET_SPD_HI		0x00000010	/* Use 57600 instead of 38400 bps */
 #define ROCKET_SPD_VHI		0x00000020	/* Use 115200 instead of 38400 bps */
 #define ROCKET_SPD_SHI		0x00000030	/* Use 230400 instead of 38400 bps */
 #define ROCKET_SPD_WARP	        0x00000040	/* Use 460800 instead of 38400 bps */
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 5dc9c4b..748c18f 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -508,7 +508,8 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
 	int	i;
 
 	cflag = tty->termios.c_cflag;
-	if (!(port = info->port))
+	port = info->port;
+	if (!port)
 		return;
 
 	ustcnt = uart->ustcnt;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 4506e40..37fff12 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -85,19 +85,6 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
 #define BOTH_EMPTY 	(UART_LSR_TEMT | UART_LSR_THRE)
 
 
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define CONFIG_SERIAL_DETECT_IRQ 1
-#endif
-#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define CONFIG_SERIAL_MANY_PORTS 1
-#endif
-
-/*
- * HUB6 is always on.  This will be removed once the header
- * files have been cleaned.
- */
-#define CONFIG_HUB6 1
-
 #include <asm/serial.h>
 /*
  * SERIAL_PORT_DFNS tells us about built-in ports that have no
@@ -2019,8 +2006,9 @@ EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl);
 static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	if (port->set_mctrl)
-		return port->set_mctrl(port, mctrl);
-	return serial8250_do_set_mctrl(port, mctrl);
+		port->set_mctrl(port, mctrl);
+	else
+		serial8250_do_set_mctrl(port, mctrl);
 }
 
 static void serial8250_break_ctl(struct uart_port *port, int break_state)
@@ -3548,6 +3536,9 @@ static struct console univ8250_console = {
 
 static int __init univ8250_console_init(void)
 {
+	if (nr_uarts == 0)
+		return -ENODEV;
+
 	serial8250_isa_init_ports();
 	register_console(&univ8250_console);
 	return 0;
@@ -3578,7 +3569,7 @@ int __init early_serial_setup(struct uart_port *port)
 {
 	struct uart_port *p;
 
-	if (port->line >= ARRAY_SIZE(serial8250_ports))
+	if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0)
 		return -ENODEV;
 
 	serial8250_isa_init_ports();
@@ -3850,7 +3841,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		uart->port.mapbase      = up->port.mapbase;
 		uart->port.mapsize      = up->port.mapsize;
 		uart->port.private_data = up->port.private_data;
-		uart->port.fifosize	= up->port.fifosize;
 		uart->tx_loadsz		= up->tx_loadsz;
 		uart->capabilities	= up->capabilities;
 		uart->port.throttle	= up->port.throttle;
@@ -3945,6 +3935,9 @@ static int __init serial8250_init(void)
 {
 	int ret;
 
+	if (nr_uarts == 0)
+		return -ENODEV;
+
 	serial8250_isa_init_ports();
 
 	printk(KERN_INFO "Serial: 8250/16550 driver, "
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 176f18f..d48b506 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -377,6 +377,16 @@ static int dw8250_probe_of(struct uart_port *p,
 	return 0;
 }
 
+static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
+{
+	struct device *dev = param;
+
+	if (dev != chan->device->dev->parent)
+		return false;
+
+	return true;
+}
+
 static int dw8250_probe_acpi(struct uart_8250_port *up,
 			     struct dw8250_data *data)
 {
@@ -389,8 +399,15 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 	p->serial_out = dw8250_serial_out32;
 	p->regshift = 2;
 
-	up->dma = &data->dma;
+	/* Platforms with iDMA */
+	if (platform_get_resource_byname(to_platform_device(up->port.dev),
+					 IORESOURCE_MEM, "lpss_priv")) {
+		data->dma.rx_param = up->port.dev->parent;
+		data->dma.tx_param = up->port.dev->parent;
+		data->dma.fn = dw8250_idma_filter;
+	}
 
+	up->dma = &data->dma;
 	up->dma->rxconf.src_maxburst = p->fifosize / 4;
 	up->dma->txconf.dst_maxburst = p->fifosize / 4;
 
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 6c0fd8b..771dda2 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -131,7 +131,7 @@ static void __init init_port(struct earlycon_device *device)
 	serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 }
 
-static int __init early_serial8250_setup(struct earlycon_device *device,
+int __init early_serial8250_setup(struct earlycon_device *device,
 					 const char *options)
 {
 	if (!(device->port.membase || device->port.iobase))
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
new file mode 100644
index 0000000..99cd478
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -0,0 +1,230 @@
+/*
+ * Serial port driver for NXP LPC18xx/43xx UART
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on 8250_mtk.c:
+ * Copyright (c) 2014 MundoReader S.L.
+ * Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+/* Additional LPC18xx/43xx 8250 registers and bits */
+#define LPC18XX_UART_RS485CTRL		(0x04c / sizeof(u32))
+#define  LPC18XX_UART_RS485CTRL_NMMEN	BIT(0)
+#define  LPC18XX_UART_RS485CTRL_DCTRL	BIT(4)
+#define  LPC18XX_UART_RS485CTRL_OINV	BIT(5)
+#define LPC18XX_UART_RS485DLY		(0x054 / sizeof(u32))
+#define LPC18XX_UART_RS485DLY_MAX	255
+
+struct lpc18xx_uart_data {
+	struct uart_8250_dma dma;
+	struct clk *clk_uart;
+	struct clk *clk_reg;
+	int line;
+};
+
+static int lpc18xx_rs485_config(struct uart_port *port,
+				struct serial_rs485 *rs485)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+	u32 rs485_ctrl_reg = 0;
+	u32 rs485_dly_reg = 0;
+	unsigned baud_clk;
+
+	if (rs485->flags & SER_RS485_ENABLED)
+		memset(rs485->padding, 0, sizeof(rs485->padding));
+	else
+		memset(rs485, 0, sizeof(*rs485));
+
+	rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+			SER_RS485_RTS_AFTER_SEND;
+
+	if (rs485->flags & SER_RS485_ENABLED) {
+		rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN |
+				  LPC18XX_UART_RS485CTRL_DCTRL;
+
+		if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+			rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV;
+			rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+		} else {
+			rs485->flags |= SER_RS485_RTS_AFTER_SEND;
+		}
+	}
+
+	if (rs485->delay_rts_after_send) {
+		baud_clk = port->uartclk / up->dl_read(up);
+		rs485_dly_reg = DIV_ROUND_UP(rs485->delay_rts_after_send
+						* baud_clk, MSEC_PER_SEC);
+
+		if (rs485_dly_reg > LPC18XX_UART_RS485DLY_MAX)
+			rs485_dly_reg = LPC18XX_UART_RS485DLY_MAX;
+
+		/* Calculate the resulting delay in ms */
+		rs485->delay_rts_after_send = (rs485_dly_reg * MSEC_PER_SEC)
+						/ baud_clk;
+	}
+
+	/* Delay RTS before send not supported */
+	rs485->delay_rts_before_send = 0;
+
+	serial_out(up, LPC18XX_UART_RS485CTRL, rs485_ctrl_reg);
+	serial_out(up, LPC18XX_UART_RS485DLY, rs485_dly_reg);
+
+	port->rs485 = *rs485;
+
+	return 0;
+}
+
+static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value)
+{
+	/*
+	 * For DMA mode one must ensure that the UART_FCR_DMA_SELECT
+	 * bit is set when FIFO is enabled. Even if DMA is not used
+	 * setting this bit doesn't seem to affect anything.
+	 */
+	if (offset == UART_FCR && (value & UART_FCR_ENABLE_FIFO))
+		value |= UART_FCR_DMA_SELECT;
+
+	offset = offset << p->regshift;
+	writel(value, p->membase + offset);
+}
+
+static int lpc18xx_serial_probe(struct platform_device *pdev)
+{
+	struct lpc18xx_uart_data *data;
+	struct uart_8250_port uart;
+	struct resource *res;
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "irq not found");
+		return irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "memory resource not found");
+		return -EINVAL;
+	}
+
+	memset(&uart, 0, sizeof(uart));
+
+	uart.port.membase = devm_ioremap(&pdev->dev, res->start,
+					 resource_size(res));
+	if (!uart.port.membase)
+		return -ENOMEM;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->clk_uart = devm_clk_get(&pdev->dev, "uartclk");
+	if (IS_ERR(data->clk_uart)) {
+		dev_err(&pdev->dev, "uart clock not found\n");
+		return PTR_ERR(data->clk_uart);
+	}
+
+	data->clk_reg = devm_clk_get(&pdev->dev, "reg");
+	if (IS_ERR(data->clk_reg)) {
+		dev_err(&pdev->dev, "reg clock not found\n");
+		return PTR_ERR(data->clk_reg);
+	}
+
+	ret = clk_prepare_enable(data->clk_reg);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable reg clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(data->clk_uart);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable uart clock\n");
+		goto dis_clk_reg;
+	}
+
+	ret = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (ret >= 0)
+		uart.port.line = ret;
+
+	data->dma.rx_param = data;
+	data->dma.tx_param = data;
+
+	spin_lock_init(&uart.port.lock);
+	uart.port.dev = &pdev->dev;
+	uart.port.irq = irq;
+	uart.port.iotype = UPIO_MEM32;
+	uart.port.mapbase = res->start;
+	uart.port.regshift = 2;
+	uart.port.type = PORT_16550A;
+	uart.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST;
+	uart.port.uartclk = clk_get_rate(data->clk_uart);
+	uart.port.private_data = data;
+	uart.port.rs485_config = lpc18xx_rs485_config;
+	uart.port.serial_out = lpc18xx_uart_serial_out;
+
+	uart.dma = &data->dma;
+	uart.dma->rxconf.src_maxburst = 1;
+	uart.dma->txconf.dst_maxburst = 1;
+
+	ret = serial8250_register_8250_port(&uart);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register 8250 port\n");
+		goto dis_uart_clk;
+	}
+
+	data->line = ret;
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+
+dis_uart_clk:
+	clk_disable_unprepare(data->clk_uart);
+dis_clk_reg:
+	clk_disable_unprepare(data->clk_reg);
+	return ret;
+}
+
+static int lpc18xx_serial_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_uart_data *data = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(data->line);
+	clk_disable_unprepare(data->clk_uart);
+	clk_disable_unprepare(data->clk_reg);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_serial_match[] = {
+	{ .compatible = "nxp,lpc1850-uart" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_serial_match);
+
+static struct platform_driver lpc18xx_serial_driver = {
+	.probe  = lpc18xx_serial_probe,
+	.remove = lpc18xx_serial_remove,
+	.driver = {
+		.name = "lpc18xx-uart",
+		.of_match_table = lpc18xx_serial_match,
+	},
+};
+module_platform_driver(lpc18xx_serial_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("Serial port driver NXP LPC18xx/43xx devices");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 7a11fac..78883ca 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -34,6 +34,7 @@
 struct mtk8250_data {
 	int			line;
 	struct clk		*uart_clk;
+	struct clk		*bus_clk;
 };
 
 static void
@@ -115,6 +116,36 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 		tty_termios_encode_baud_rate(termios, baud, baud);
 }
 
+static int mtk8250_runtime_suspend(struct device *dev)
+{
+	struct mtk8250_data *data = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(data->uart_clk);
+	clk_disable_unprepare(data->bus_clk);
+
+	return 0;
+}
+
+static int mtk8250_runtime_resume(struct device *dev)
+{
+	struct mtk8250_data *data = dev_get_drvdata(dev);
+	int err;
+
+	err = clk_prepare_enable(data->uart_clk);
+	if (err) {
+		dev_warn(dev, "Can't enable clock\n");
+		return err;
+	}
+
+	err = clk_prepare_enable(data->bus_clk);
+	if (err) {
+		dev_warn(dev, "Can't enable bus clock\n");
+		return err;
+	}
+
+	return 0;
+}
+
 static void
 mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
 {
@@ -130,22 +161,24 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
 static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
 			   struct mtk8250_data *data)
 {
-	int err;
-	struct device_node *np = pdev->dev.of_node;
-
-	data->uart_clk = of_clk_get(np, 0);
+	data->uart_clk = devm_clk_get(&pdev->dev, "baud");
 	if (IS_ERR(data->uart_clk)) {
-		dev_warn(&pdev->dev, "Can't get timer clock\n");
-		return PTR_ERR(data->uart_clk);
+		/*
+		 * For compatibility with older device trees try unnamed
+		 * clk when no baud clk can be found.
+		 */
+		data->uart_clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(data->uart_clk)) {
+			dev_warn(&pdev->dev, "Can't get uart clock\n");
+			return PTR_ERR(data->uart_clk);
+		}
+
+		return 0;
 	}
 
-	err = clk_prepare_enable(data->uart_clk);
-	if (err) {
-		dev_warn(&pdev->dev, "Can't prepare clock\n");
-		clk_put(data->uart_clk);
-		return err;
-	}
-	p->uartclk = clk_get_rate(data->uart_clk);
+	data->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (IS_ERR(data->bus_clk))
+		return PTR_ERR(data->bus_clk);
 
 	return 0;
 }
@@ -190,19 +223,24 @@ static int mtk8250_probe(struct platform_device *pdev)
 	uart.port.regshift = 2;
 	uart.port.private_data = data;
 	uart.port.set_termios = mtk8250_set_termios;
+	uart.port.uartclk = clk_get_rate(data->uart_clk);
 
 	/* Disable Rate Fix function */
 	writel(0x0, uart.port.membase +
 			(MTK_UART_RATE_FIX << uart.port.regshift));
 
-	data->line = serial8250_register_8250_port(&uart);
-	if (data->line < 0)
-		return data->line;
-
 	platform_set_drvdata(pdev, data);
 
-	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
+	if (!pm_runtime_enabled(&pdev->dev)) {
+		err = mtk8250_runtime_resume(&pdev->dev);
+		if (err)
+			return err;
+	}
+
+	data->line = serial8250_register_8250_port(&uart);
+	if (data->line < 0)
+		return data->line;
 
 	return 0;
 }
@@ -214,13 +252,13 @@ static int mtk8250_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	serial8250_unregister_port(data->line);
-	if (!IS_ERR(data->uart_clk)) {
-		clk_disable_unprepare(data->uart_clk);
-		clk_put(data->uart_clk);
-	}
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
+
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		mtk8250_runtime_suspend(&pdev->dev);
+
 	return 0;
 }
 
@@ -244,28 +282,6 @@ static int mtk8250_resume(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
-#ifdef CONFIG_PM
-static int mtk8250_runtime_suspend(struct device *dev)
-{
-	struct mtk8250_data *data = dev_get_drvdata(dev);
-
-	if (!IS_ERR(data->uart_clk))
-		clk_disable_unprepare(data->uart_clk);
-
-	return 0;
-}
-
-static int mtk8250_runtime_resume(struct device *dev)
-{
-	struct mtk8250_data *data = dev_get_drvdata(dev);
-
-	if (!IS_ERR(data->uart_clk))
-		clk_prepare_enable(data->uart_clk);
-
-	return 0;
-}
-#endif
-
 static const struct dev_pm_ops mtk8250_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume)
 	SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume,
@@ -289,6 +305,21 @@ static struct platform_driver mtk8250_platform_driver = {
 };
 module_platform_driver(mtk8250_platform_driver);
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init early_mtk8250_setup(struct earlycon_device *device,
+					const char *options)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->port.iotype = UPIO_MEM32;
+
+	return early_serial8250_setup(device, NULL);
+}
+
+OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup);
+#endif
+
 MODULE_AUTHOR("Matthias Brugger");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Mediatek 8250 serial port driver");
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index dce1a23..9782043 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -98,6 +98,7 @@ struct omap8250_priv {
 	struct pm_qos_request pm_qos_request;
 	struct work_struct qos_work;
 	struct uart_8250_dma omap8250_dma;
+	spinlock_t rx_dma_lock;
 };
 
 static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -726,14 +727,21 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir);
 
 static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
 {
+	struct omap8250_priv	*priv = p->port.private_data;
 	struct uart_8250_dma    *dma = p->dma;
 	struct tty_port         *tty_port = &p->port.state->port;
 	struct dma_tx_state     state;
 	int                     count;
+	unsigned long		flags;
 
 	dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
 				dma->rx_size, DMA_FROM_DEVICE);
 
+	spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+	if (!dma->rx_running)
+		goto unlock;
+
 	dma->rx_running = 0;
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 	dmaengine_terminate_all(dma->rxchan);
@@ -742,6 +750,9 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
 
 	tty_insert_flip_string(tty_port, dma->rx_buf, count);
 	p->port.icount.rx += count;
+unlock:
+	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
 	if (!error)
 		omap_8250_rx_dma(p, 0);
 
@@ -753,28 +764,45 @@ static void __dma_rx_complete(void *param)
 	__dma_rx_do_complete(param, false);
 }
 
+static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
+{
+	struct omap8250_priv	*priv = p->port.private_data;
+	struct uart_8250_dma	*dma = p->dma;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+	if (!dma->rx_running) {
+		spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+		return;
+	}
+
+	dmaengine_pause(dma->rxchan);
+
+	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
+	__dma_rx_do_complete(p, true);
+}
+
 static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 {
+	struct omap8250_priv		*priv = p->port.private_data;
 	struct uart_8250_dma            *dma = p->dma;
+	int				err = 0;
 	struct dma_async_tx_descriptor  *desc;
+	unsigned long			flags;
 
 	switch (iir & 0x3f) {
 	case UART_IIR_RLSI:
 		/* 8250_core handles errors and break interrupts */
-		if (dma->rx_running) {
-			dmaengine_pause(dma->rxchan);
-			__dma_rx_do_complete(p, true);
-		}
+		omap_8250_rx_dma_flush(p);
 		return -EIO;
 	case UART_IIR_RX_TIMEOUT:
 		/*
 		 * If RCVR FIFO trigger level was not reached, complete the
 		 * transfer and let 8250_core copy the remaining data.
 		 */
-		if (dma->rx_running) {
-			dmaengine_pause(dma->rxchan);
-			__dma_rx_do_complete(p, true);
-		}
+		omap_8250_rx_dma_flush(p);
 		return -ETIMEDOUT;
 	case UART_IIR_RDI:
 		/*
@@ -786,24 +814,25 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 		 * the DMA won't do anything soon so we have to cancel the DMA
 		 * transfer and purge the FIFO manually.
 		 */
-		if (dma->rx_running) {
-			dmaengine_pause(dma->rxchan);
-			__dma_rx_do_complete(p, true);
-		}
+		omap_8250_rx_dma_flush(p);
 		return -ETIMEDOUT;
 
 	default:
 		break;
 	}
 
+	spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
 	if (dma->rx_running)
-		return 0;
+		goto out;
 
 	desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
 					   dma->rx_size, DMA_DEV_TO_MEM,
 					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc)
-		return -EBUSY;
+	if (!desc) {
+		err = -EBUSY;
+		goto out;
+	}
 
 	dma->rx_running = 1;
 	desc->callback = __dma_rx_complete;
@@ -815,7 +844,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 				   dma->rx_size, DMA_FROM_DEVICE);
 
 	dma_async_issue_pending(dma->rxchan);
-	return 0;
+out:
+	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+	return err;
 }
 
 static int omap_8250_tx_dma(struct uart_8250_port *p);
@@ -1129,6 +1160,8 @@ static int omap8250_probe(struct platform_device *pdev)
 			   priv->latency);
 	INIT_WORK(&priv->qos_work, omap8250_uart_qos_work);
 
+	spin_lock_init(&priv->rx_dma_lock);
+
 	device_init_wakeup(&pdev->dev, true);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 46bcebb..e55f18b 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1823,6 +1823,9 @@ static int pci_eg20t_init(struct pci_dev *dev)
 #endif
 }
 
+#define PCI_DEVICE_ID_EXAR_XR17V4358	0x4358
+#define PCI_DEVICE_ID_EXAR_XR17V8358	0x8358
+
 static int
 pci_xr17c154_setup(struct serial_private *priv,
 		  const struct pciserial_board *board,
@@ -1832,6 +1835,15 @@ pci_xr17c154_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
+static inline int
+xr17v35x_has_slave(struct serial_private *priv)
+{
+	const int dev_id = priv->dev->device;
+
+	return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
+	        (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+}
+
 static int
 pci_xr17v35x_setup(struct serial_private *priv,
 		  const struct pciserial_board *board,
@@ -1846,6 +1858,13 @@ pci_xr17v35x_setup(struct serial_private *priv,
 	port->port.flags |= UPF_EXAR_EFR;
 
 	/*
+	 * Setup the uart clock for the devices on expansion slot to
+	 * half the clock speed of the main chip (which is 125MHz)
+	 */
+	if (xr17v35x_has_slave(priv) && idx >= 8)
+		port->port.uartclk = (7812500 * 16 / 2);
+
+	/*
 	 * Setup Multipurpose Input/Output pins.
 	 */
 	if (idx == 0) {
@@ -1998,8 +2017,6 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 
-#define PCI_DEVICE_ID_EXAR_XR17V8358	0x8358
-
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
@@ -2524,6 +2541,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	},
 	{
 		.vendor = PCI_VENDOR_ID_EXAR,
+		.device = PCI_DEVICE_ID_EXAR_XR17V4358,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_EXAR,
 		.device = PCI_DEVICE_ID_EXAR_XR17V8358,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
@@ -3008,6 +3032,7 @@ enum pci_board_num_t {
 	pbn_exar_XR17V352,
 	pbn_exar_XR17V354,
 	pbn_exar_XR17V358,
+	pbn_exar_XR17V4358,
 	pbn_exar_XR17V8358,
 	pbn_exar_ibm_saturn,
 	pbn_pasemi_1682M,
@@ -3695,6 +3720,14 @@ static struct pciserial_board pci_boards[] = {
 		.reg_shift	= 0,
 		.first_offset	= 0,
 	},
+	[pbn_exar_XR17V4358] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 12,
+		.base_baud	= 7812500,
+		.uart_offset	= 0x400,
+		.reg_shift	= 0,
+		.first_offset	= 0,
+	},
 	[pbn_exar_XR17V8358] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 16,
@@ -5112,6 +5145,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0,
 		0, pbn_exar_XR17V358 },
+	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V4358,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V4358 },
 	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0,
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
new file mode 100644
index 0000000..7d79425
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+/* Most (but not all) of UniPhier UART devices have 64-depth FIFO. */
+#define UNIPHIER_UART_DEFAULT_FIFO_SIZE	64
+
+#define UNIPHIER_UART_CHAR_FCR	3	/* Character / FIFO Control Register */
+#define UNIPHIER_UART_LCR_MCR	4	/* Line/Modem Control Register */
+#define   UNIPHIER_UART_LCR_SHIFT	8
+#define UNIPHIER_UART_DLR	9	/* Divisor Latch Register */
+
+struct uniphier8250_priv {
+	int line;
+	struct clk *clk;
+	spinlock_t atomic_write_lock;
+};
+
+/*
+ * The register map is slightly different from that of 8250.
+ * IO callbacks must be overridden for correct access to FCR, LCR, and MCR.
+ */
+static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int valshift = 0;
+
+	switch (offset) {
+	case UART_LCR:
+		valshift = UNIPHIER_UART_LCR_SHIFT;
+		/* fall through */
+	case UART_MCR:
+		offset = UNIPHIER_UART_LCR_MCR;
+		break;
+	default:
+		break;
+	}
+
+	offset <<= p->regshift;
+
+	/*
+	 * The return value must be masked with 0xff because LCR and MCR reside
+	 * in the same register that must be accessed by 32-bit write/read.
+	 * 8 or 16 bit access to this hardware result in unexpected behavior.
+	 */
+	return (readl(p->membase + offset) >> valshift) & 0xff;
+}
+
+static void uniphier_serial_out(struct uart_port *p, int offset, int value)
+{
+	unsigned int valshift = 0;
+	bool normal = false;
+
+	switch (offset) {
+	case UART_FCR:
+		offset = UNIPHIER_UART_CHAR_FCR;
+		break;
+	case UART_LCR:
+		valshift = UNIPHIER_UART_LCR_SHIFT;
+		/* Divisor latch access bit does not exist. */
+		value &= ~(UART_LCR_DLAB << valshift);
+		/* fall through */
+	case UART_MCR:
+		offset = UNIPHIER_UART_LCR_MCR;
+		break;
+	default:
+		normal = true;
+		break;
+	}
+
+	offset <<= p->regshift;
+
+	if (normal) {
+		writel(value, p->membase + offset);
+	} else {
+		/*
+		 * Special case: two registers share the same address that
+		 * must be 32-bit accessed.  As this is not longer atomic safe,
+		 * take a lock just in case.
+		 */
+		struct uniphier8250_priv *priv = p->private_data;
+		unsigned long flags;
+		u32 tmp;
+
+		spin_lock_irqsave(&priv->atomic_write_lock, flags);
+		tmp = readl(p->membase + offset);
+		tmp &= ~(0xff << valshift);
+		tmp |= value << valshift;
+		writel(tmp, p->membase + offset);
+		spin_unlock_irqrestore(&priv->atomic_write_lock, flags);
+	}
+}
+
+/*
+ * This hardware does not have the divisor latch access bit.
+ * The divisor latch register exists at different address.
+ * Override dl_read/write callbacks.
+ */
+static int uniphier_serial_dl_read(struct uart_8250_port *up)
+{
+	return readl(up->port.membase + UNIPHIER_UART_DLR);
+}
+
+static void uniphier_serial_dl_write(struct uart_8250_port *up, int value)
+{
+	writel(value, up->port.membase + UNIPHIER_UART_DLR);
+}
+
+static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
+				    struct uniphier8250_priv *priv)
+{
+	int ret;
+	u32 prop;
+	struct device_node *np = dev->of_node;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(dev, "failed to get alias id\n");
+		return ret;
+	}
+	port->line = priv->line = ret;
+
+	/* Get clk rate through clk driver */
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret < 0)
+		return ret;
+
+	port->uartclk = clk_get_rate(priv->clk);
+
+	/* Check for fifo size */
+	if (of_property_read_u32(np, "fifo-size", &prop) == 0)
+		port->fifosize = prop;
+	else
+		port->fifosize = UNIPHIER_UART_DEFAULT_FIFO_SIZE;
+
+	return 0;
+}
+
+static int uniphier_uart_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uart_8250_port up;
+	struct uniphier8250_priv *priv;
+	struct resource *regs;
+	void __iomem *membase;
+	int irq;
+	int ret;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "failed to get memory resource");
+		return -EINVAL;
+	}
+
+	membase = devm_ioremap(dev, regs->start, resource_size(regs));
+	if (!membase)
+		return -ENOMEM;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "failed to get IRQ number");
+		return irq;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	memset(&up, 0, sizeof(up));
+
+	ret = uniphier_of_serial_setup(dev, &up.port, priv);
+	if (ret < 0)
+		return ret;
+
+	spin_lock_init(&priv->atomic_write_lock);
+
+	up.port.dev = dev;
+	up.port.private_data = priv;
+	up.port.mapbase = regs->start;
+	up.port.mapsize = resource_size(regs);
+	up.port.membase = membase;
+	up.port.irq = irq;
+
+	up.port.type = PORT_16550A;
+	up.port.iotype = UPIO_MEM32;
+	up.port.regshift = 2;
+	up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE;
+	up.capabilities = UART_CAP_FIFO;
+
+	up.port.serial_in = uniphier_serial_in;
+	up.port.serial_out = uniphier_serial_out;
+	up.dl_read = uniphier_serial_dl_read;
+	up.dl_write = uniphier_serial_dl_write;
+
+	ret = serial8250_register_8250_port(&up);
+	if (ret < 0) {
+		dev_err(dev, "failed to register 8250 port\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int uniphier_uart_remove(struct platform_device *pdev)
+{
+	struct uniphier8250_priv *priv = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(priv->line);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id uniphier_uart_match[] = {
+	{ .compatible = "socionext,uniphier-uart" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_uart_match);
+
+static struct platform_driver uniphier_uart_platform_driver = {
+	.probe		= uniphier_uart_probe,
+	.remove		= uniphier_uart_remove,
+	.driver = {
+		.name	= "uniphier-uart",
+		.of_match_table = uniphier_uart_match,
+	},
+};
+module_platform_driver(uniphier_uart_platform_driver);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index c350703..a74a8e4 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -336,9 +336,24 @@ config SERIAL_8250_FINTEK
 	  LPC to 4 UART. This device has some RS485 functionality not available
 	  through the PNP driver. If unsure, say N.
 
+config SERIAL_8250_LPC18XX
+	bool "NXP LPC18xx/43xx serial port support"
+	depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST)
+	default ARCH_LPC18XX
+	help
+	  If you have a LPC18xx/43xx based board and want to use the
+	  serial port, say Y to this option. If unsure, say Y.
+
 config SERIAL_8250_MT6577
 	bool "Mediatek serial port support"
 	depends on SERIAL_8250 && ARCH_MEDIATEK
 	help
 	  If you have a Mediatek based board and want to use the
 	  serial port, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_UNIPHIER
+	tristate "Support for UniPhier on-chip UART"
+	depends on SERIAL_8250 && ARCH_UNIPHIER
+	help
+	  If you have a UniPhier based board and want to use the on-chip
+	  serial ports, say Y to this option. If unsure, say N.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 31e7cdc..6fa22ff 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -22,4 +22,6 @@ obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o
 obj-$(CONFIG_SERIAL_8250_EM)		+= 8250_em.o
 obj-$(CONFIG_SERIAL_8250_OMAP)		+= 8250_omap.o
 obj-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
+obj-$(CONFIG_SERIAL_8250_LPC18XX)	+= 8250_lpc18xx.o
 obj-$(CONFIG_SERIAL_8250_MT6577)	+= 8250_mtk.o
+obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index dea1eff..76e65b7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -241,7 +241,6 @@ config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
 	depends on PLAT_SAMSUNG || ARCH_EXYNOS
 	select SERIAL_CORE
-	select SERIAL_EARLYCON
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
 	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
@@ -277,6 +276,7 @@ config SERIAL_SAMSUNG_CONSOLE
 	bool "Support for console on Samsung SoC serial port"
 	depends on SERIAL_SAMSUNG=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	help
 	  Allow selection of the S3C24XX on-board serial ports for use as
 	  an virtual console.
@@ -1179,15 +1179,42 @@ config SERIAL_SCCNXP_CONSOLE
 	help
 	  Support for console on SCCNXP serial ports.
 
+config SERIAL_SC16IS7XX_CORE
+        tristate
+
 config SERIAL_SC16IS7XX
-	tristate "SC16IS7xx serial support"
-	depends on I2C
-	select SERIAL_CORE
-	select REGMAP_I2C if I2C
-	help
-	  This selects support for SC16IS7xx serial ports.
-	  Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
-	  SC16IS760 and SC16IS762.
+        tristate "SC16IS7xx serial support"
+        select SERIAL_CORE
+        depends on I2C || SPI_MASTER
+        help
+          This selects support for SC16IS7xx serial ports.
+          Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+          SC16IS760 and SC16IS762. Select supported buses using options below.
+
+config SERIAL_SC16IS7XX_I2C
+        bool "SC16IS7xx for I2C interface"
+        depends on SERIAL_SC16IS7XX
+        depends on I2C
+        select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+        select REGMAP_I2C if I2C
+        default y
+        help
+          Enable SC16IS7xx driver on I2C bus,
+          If required say y, and say n to i2c if not required,
+          Enabled by default to support oldconfig.
+          You must select at least one bus for the driver to be built.
+
+config SERIAL_SC16IS7XX_SPI
+        bool "SC16IS7xx for spi interface"
+        depends on SERIAL_SC16IS7XX
+        depends on SPI_MASTER
+        select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+        select REGMAP_SPI if SPI_MASTER
+        help
+          Enable SC16IS7xx driver on SPI bus,
+          If required say y, and say n to spi if not required,
+          This is additional support to exsisting driver.
+          You must select at least one bus for the driver to be built.
 
 config SERIAL_BFIN_SPORT
 	tristate "Blackfin SPORT emulate UART"
@@ -1349,7 +1376,7 @@ config SERIAL_ALTERA_UART_CONSOLE
 
 config SERIAL_IFX6X60
         tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
-	depends on GPIOLIB && SPI
+	depends on GPIOLIB && SPI && HAS_DMA
 	help
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
@@ -1378,14 +1405,6 @@ config SERIAL_PCH_UART_CONSOLE
 	  (the system  console is the device which receives all kernel messages and
 	  warnings and which allows logins in single user mode).
 
-config SERIAL_MSM_SMD
-	bool "Enable tty device interface for some SMD ports"
-	default n
-	depends on MSM_SMD
-	help
-	  Enables userspace clients to read and write to some streaming SMD
-	  ports via tty device interface for MSM chipset.
-
 config SERIAL_MXS_AUART
 	depends on ARCH_MXS
 	tristate "MXS AUART support"
@@ -1589,6 +1608,23 @@ config SERIAL_SPRD_CONSOLE
 	  with "earlycon" on the kernel command line. The console is
 	  enabled when early_param is processed.
 
+config SERIAL_STM32
+	tristate "STMicroelectronics STM32 serial port support"
+	select SERIAL_CORE
+	depends on ARM || COMPILE_TEST
+	help
+	  This driver is for the on-chip Serial Controller on
+	  STMicroelectronics STM32 MCUs.
+	  USART supports Rx & Tx functionality.
+	  It support all industry standard baud rates.
+
+	  If unsure, say N.
+
+config SERIAL_STM32_CONSOLE
+	bool "Support for console on STM32"
+	depends on SERIAL_STM32=y
+	select SERIAL_CORE_CONSOLE
+
 endmenu
 
 config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index c3ac3d9..5ab4111 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
 obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
 obj-$(CONFIG_SERIAL_ETRAXFS) += etraxfs-uart.o
 obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
-obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o
+obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
@@ -79,7 +79,6 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
 obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
-obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
 obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
 obj-$(CONFIG_SERIAL_LANTIQ)	+= lantiq.o
 obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
@@ -93,6 +92,7 @@ obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
 obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR)	+= digicolor-usart.o
 obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
 obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
+obj-$(CONFIG_SERIAL_STM32)	+= stm32-usart.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 0fefdd8..32df2a0 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -387,7 +387,7 @@ console_initcall(altera_jtaguart_console_init);
 
 #define	ALTERA_JTAGUART_CONSOLE	NULL
 
-#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */
+#endif /* CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE */
 
 static struct uart_driver altera_jtaguart_driver = {
 	.owner		= THIS_MODULE,
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index b2859fe..fd87a6f 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -493,7 +493,7 @@ console_initcall(altera_uart_console_init);
 
 #define	ALTERA_UART_CONSOLE	NULL
 
-#endif /* CONFIG_ALTERA_UART_CONSOLE */
+#endif /* CONFIG_SERIAL_ALTERA_UART_CONSOLE */
 
 /*
  *	Define the altera_uart UART driver structure.
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 763eb20..50cf5b1 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -58,7 +58,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/sizes.h>
 #include <linux/io.h>
-#include <linux/workqueue.h>
+#include <linux/acpi.h>
 
 #define UART_NR			14
 
@@ -79,6 +79,8 @@ struct vendor_data {
 	bool			oversampling;
 	bool			dma_threshold;
 	bool			cts_event_workaround;
+	bool			always_enabled;
+	bool			fixed_options;
 
 	unsigned int (*get_fifosize)(struct amba_device *dev);
 };
@@ -95,9 +97,19 @@ static struct vendor_data vendor_arm = {
 	.oversampling		= false,
 	.dma_threshold		= false,
 	.cts_event_workaround	= false,
+	.always_enabled		= false,
+	.fixed_options		= false,
 	.get_fifosize		= get_fifosize_arm,
 };
 
+static struct vendor_data vendor_sbsa = {
+	.oversampling		= false,
+	.dma_threshold		= false,
+	.cts_event_workaround	= false,
+	.always_enabled		= true,
+	.fixed_options		= true,
+};
+
 static unsigned int get_fifosize_st(struct amba_device *dev)
 {
 	return 64;
@@ -110,6 +122,8 @@ static struct vendor_data vendor_st = {
 	.oversampling		= true,
 	.dma_threshold		= true,
 	.cts_event_workaround	= true,
+	.always_enabled		= false,
+	.fixed_options		= false,
 	.get_fifosize		= get_fifosize_st,
 };
 
@@ -157,9 +171,8 @@ struct uart_amba_port {
 	unsigned int		lcrh_tx;	/* vendor-specific */
 	unsigned int		lcrh_rx;	/* vendor-specific */
 	unsigned int		old_cr;		/* state during shutdown */
-	struct delayed_work	tx_softirq_work;
 	bool			autorts;
-	unsigned int		tx_irq_seen;	/* 0=none, 1=1, 2=2 or more */
+	unsigned int		fixed_baud;	/* vendor-set fixed baud rate */
 	char			type[12];
 #ifdef CONFIG_DMA_ENGINE
 	/* DMA stuff */
@@ -1172,15 +1185,14 @@ static void pl011_stop_tx(struct uart_port *port)
 	pl011_dma_tx_stop(uap);
 }
 
-static bool pl011_tx_chars(struct uart_amba_port *uap);
+static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
 
 /* Start TX with programmed I/O only (no DMA) */
 static void pl011_start_tx_pio(struct uart_amba_port *uap)
 {
 	uap->im |= UART011_TXIM;
 	writew(uap->im, uap->port.membase + UART011_IMSC);
-	if (!uap->tx_irq_seen)
-		pl011_tx_chars(uap);
+	pl011_tx_chars(uap, false);
 }
 
 static void pl011_start_tx(struct uart_port *port)
@@ -1247,15 +1259,11 @@ __acquires(&uap->port.lock)
 	spin_lock(&uap->port.lock);
 }
 
-/*
- * Transmit a character
- *
- * Returns true if the character was successfully queued to the FIFO.
- * Returns false otherwise.
- */
-static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c)
+static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
+			  bool from_irq)
 {
-	if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+	if (unlikely(!from_irq) &&
+	    readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
 		return false; /* unable to transmit character */
 
 	writew(c, uap->port.membase + UART01x_DR);
@@ -1264,70 +1272,41 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c)
 	return true;
 }
 
-static bool pl011_tx_chars(struct uart_amba_port *uap)
+static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 {
 	struct circ_buf *xmit = &uap->port.state->xmit;
-	int count;
-
-	if (unlikely(uap->tx_irq_seen < 2))
-		/*
-		 * Initial FIFO fill level unknown: we must check TXFF
-		 * after each write, so just try to fill up the FIFO.
-		 */
-		count = uap->fifosize;
-	else /* tx_irq_seen >= 2 */
-		/*
-		 * FIFO initially at least half-empty, so we can simply
-		 * write half the FIFO without polling TXFF.
-
-		 * Note: the *first* TX IRQ can still race with
-		 * pl011_start_tx_pio(), which can result in the FIFO
-		 * being fuller than expected in that case.
-		 */
-		count = uap->fifosize >> 1;
-
-	/*
-	 * If the FIFO is full we're guaranteed a TX IRQ at some later point,
-	 * and can't transmit immediately in any case:
-	 */
-	if (unlikely(uap->tx_irq_seen < 2 &&
-		     readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF))
-		return false;
+	int count = uap->fifosize >> 1;
 
 	if (uap->port.x_char) {
-		if (!pl011_tx_char(uap, uap->port.x_char))
-			goto done;
+		if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
+			return;
 		uap->port.x_char = 0;
 		--count;
 	}
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
 		pl011_stop_tx(&uap->port);
-		goto done;
+		return;
 	}
 
 	/* If we are using DMA mode, try to send some characters. */
 	if (pl011_dma_tx_irq(uap))
-		goto done;
+		return;
 
-	while (count-- > 0 && pl011_tx_char(uap, xmit->buf[xmit->tail])) {
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		if (uart_circ_empty(xmit))
+	do {
+		if (likely(from_irq) && count-- == 0)
 			break;
-	}
+
+		if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq))
+			break;
+
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+	} while (!uart_circ_empty(xmit));
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&uap->port);
 
-	if (uart_circ_empty(xmit)) {
+	if (uart_circ_empty(xmit))
 		pl011_stop_tx(&uap->port);
-		goto done;
-	}
-
-	if (unlikely(!uap->tx_irq_seen))
-		schedule_delayed_work(&uap->tx_softirq_work, uap->port.timeout);
-
-done:
-	return false;
 }
 
 static void pl011_modem_status(struct uart_amba_port *uap)
@@ -1354,26 +1333,23 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 }
 
-static void pl011_tx_softirq(struct work_struct *work)
+static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 {
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct uart_amba_port *uap =
-		container_of(dwork, struct uart_amba_port, tx_softirq_work);
-
-	spin_lock(&uap->port.lock);
-	while (pl011_tx_chars(uap)) ;
-	spin_unlock(&uap->port.lock);
-}
+	unsigned int dummy_read;
 
-static void pl011_tx_irq_seen(struct uart_amba_port *uap)
-{
-	if (likely(uap->tx_irq_seen > 1))
+	if (!uap->vendor->cts_event_workaround)
 		return;
 
-	uap->tx_irq_seen++;
-	if (uap->tx_irq_seen < 2)
-		/* first TX IRQ */
-		cancel_delayed_work(&uap->tx_softirq_work);
+	/* workaround to make sure that all bits are unlocked.. */
+	writew(0x00, uap->port.membase + UART011_ICR);
+
+	/*
+	 * WA: introduce 26ns(1 uart clk) delay before W1C;
+	 * single apb access will incur 2 pclk(133.12Mhz) delay,
+	 * so add 2 dummy reads
+	 */
+	dummy_read = readw(uap->port.membase + UART011_ICR);
+	dummy_read = readw(uap->port.membase + UART011_ICR);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -1381,25 +1357,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 	struct uart_amba_port *uap = dev_id;
 	unsigned long flags;
 	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+	u16 imsc;
 	int handled = 0;
-	unsigned int dummy_read;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
-	status = readw(uap->port.membase + UART011_MIS);
+	imsc = readw(uap->port.membase + UART011_IMSC);
+	status = readw(uap->port.membase + UART011_RIS) & imsc;
 	if (status) {
 		do {
-			if (uap->vendor->cts_event_workaround) {
-				/* workaround to make sure that all bits are unlocked.. */
-				writew(0x00, uap->port.membase + UART011_ICR);
-
-				/*
-				 * WA: introduce 26ns(1 uart clk) delay before W1C;
-				 * single apb access will incur 2 pclk(133.12Mhz) delay,
-				 * so add 2 dummy reads
-				 */
-				dummy_read = readw(uap->port.membase + UART011_ICR);
-				dummy_read = readw(uap->port.membase + UART011_ICR);
-			}
+			check_apply_cts_event_workaround(uap);
 
 			writew(status & ~(UART011_TXIS|UART011_RTIS|
 					  UART011_RXIS),
@@ -1414,15 +1380,13 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 			if (status & (UART011_DSRMIS|UART011_DCDMIS|
 				      UART011_CTSMIS|UART011_RIMIS))
 				pl011_modem_status(uap);
-			if (status & UART011_TXIS) {
-				pl011_tx_irq_seen(uap);
-				pl011_tx_chars(uap);
-			}
+			if (status & UART011_TXIS)
+				pl011_tx_chars(uap, true);
 
 			if (pass_counter-- == 0)
 				break;
 
-			status = readw(uap->port.membase + UART011_MIS);
+			status = readw(uap->port.membase + UART011_RIS) & imsc;
 		} while (status != 0);
 		handled = 1;
 	}
@@ -1617,6 +1581,32 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
 	}
 }
 
+static int pl011_allocate_irq(struct uart_amba_port *uap)
+{
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+
+	return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+}
+
+/*
+ * Enable interrupts, only timeouts when using DMA
+ * if initial RX DMA job failed, start in interrupt mode
+ * as well.
+ */
+static void pl011_enable_interrupts(struct uart_amba_port *uap)
+{
+	spin_lock_irq(&uap->port.lock);
+
+	/* Clear out any spuriously appearing RX interrupts */
+	writew(UART011_RTIS | UART011_RXIS,
+	       uap->port.membase + UART011_ICR);
+	uap->im = UART011_RTIM;
+	if (!pl011_dma_rx_running(uap))
+		uap->im |= UART011_RXIM;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+	spin_unlock_irq(&uap->port.lock);
+}
+
 static int pl011_startup(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1628,20 +1618,12 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(uap->im, uap->port.membase + UART011_IMSC);
-
-	/*
-	 * Allocate the IRQ
-	 */
-	retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+	retval = pl011_allocate_irq(uap);
 	if (retval)
 		goto clk_dis;
 
 	writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
 
-	/* Assume that TX IRQ doesn't work until we see one: */
-	uap->tx_irq_seen = 0;
-
 	spin_lock_irq(&uap->port.lock);
 
 	/* restore RTS and DTR */
@@ -1659,20 +1641,7 @@ static int pl011_startup(struct uart_port *port)
 	/* Startup DMA */
 	pl011_dma_startup(uap);
 
-	/*
-	 * Finally, enable interrupts, only timeouts when using DMA
-	 * if initial RX DMA job failed, start in interrupt mode
-	 * as well.
-	 */
-	spin_lock_irq(&uap->port.lock);
-	/* Clear out any spuriously appearing RX interrupts */
-	 writew(UART011_RTIS | UART011_RXIS,
-		uap->port.membase + UART011_ICR);
-	uap->im = UART011_RTIM;
-	if (!pl011_dma_rx_running(uap))
-		uap->im |= UART011_RXIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
-	spin_unlock_irq(&uap->port.lock);
+	pl011_enable_interrupts(uap);
 
 	return 0;
 
@@ -1681,6 +1650,28 @@ static int pl011_startup(struct uart_port *port)
 	return retval;
 }
 
+static int sbsa_uart_startup(struct uart_port *port)
+{
+	struct uart_amba_port *uap =
+		container_of(port, struct uart_amba_port, port);
+	int retval;
+
+	retval = pl011_hwinit(port);
+	if (retval)
+		return retval;
+
+	retval = pl011_allocate_irq(uap);
+	if (retval)
+		return retval;
+
+	/* The SBSA UART does not support any modem status lines. */
+	uap->old_status = 0;
+
+	pl011_enable_interrupts(uap);
+
+	return 0;
+}
+
 static void pl011_shutdown_channel(struct uart_amba_port *uap,
 					unsigned int lcrh)
 {
@@ -1691,36 +1682,15 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
       writew(val, uap->port.membase + lcrh);
 }
 
-static void pl011_shutdown(struct uart_port *port)
+/*
+ * disable the port. It should not disable RTS and DTR.
+ * Also RTS and DTR state should be preserved to restore
+ * it during startup().
+ */
+static void pl011_disable_uart(struct uart_amba_port *uap)
 {
-	struct uart_amba_port *uap =
-	    container_of(port, struct uart_amba_port, port);
 	unsigned int cr;
 
-	cancel_delayed_work_sync(&uap->tx_softirq_work);
-
-	/*
-	 * disable all interrupts
-	 */
-	spin_lock_irq(&uap->port.lock);
-	uap->im = 0;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
-	writew(0xffff, uap->port.membase + UART011_ICR);
-	spin_unlock_irq(&uap->port.lock);
-
-	pl011_dma_shutdown(uap);
-
-	/*
-	 * Free the interrupt
-	 */
-	free_irq(uap->port.irq, uap);
-
-	/*
-	 * disable the port
-	 * disable the port. It should not disable RTS and DTR.
-	 * Also RTS and DTR state should be preserved to restore
-	 * it during startup().
-	 */
 	uap->autorts = false;
 	spin_lock_irq(&uap->port.lock);
 	cr = readw(uap->port.membase + UART011_CR);
@@ -1736,6 +1706,32 @@ static void pl011_shutdown(struct uart_port *port)
 	pl011_shutdown_channel(uap, uap->lcrh_rx);
 	if (uap->lcrh_rx != uap->lcrh_tx)
 		pl011_shutdown_channel(uap, uap->lcrh_tx);
+}
+
+static void pl011_disable_interrupts(struct uart_amba_port *uap)
+{
+	spin_lock_irq(&uap->port.lock);
+
+	/* mask all interrupts and clear all pending ones */
+	uap->im = 0;
+	writew(uap->im, uap->port.membase + UART011_IMSC);
+	writew(0xffff, uap->port.membase + UART011_ICR);
+
+	spin_unlock_irq(&uap->port.lock);
+}
+
+static void pl011_shutdown(struct uart_port *port)
+{
+	struct uart_amba_port *uap =
+		container_of(port, struct uart_amba_port, port);
+
+	pl011_disable_interrupts(uap);
+
+	pl011_dma_shutdown(uap);
+
+	free_irq(uap->port.irq, uap);
+
+	pl011_disable_uart(uap);
 
 	/*
 	 * Shut down the clock producer
@@ -1756,6 +1752,51 @@ static void pl011_shutdown(struct uart_port *port)
 		uap->port.ops->flush_buffer(port);
 }
 
+static void sbsa_uart_shutdown(struct uart_port *port)
+{
+	struct uart_amba_port *uap =
+		container_of(port, struct uart_amba_port, port);
+
+	pl011_disable_interrupts(uap);
+
+	free_irq(uap->port.irq, uap);
+
+	if (uap->port.ops->flush_buffer)
+		uap->port.ops->flush_buffer(port);
+}
+
+static void
+pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios)
+{
+	port->read_status_mask = UART011_DR_OE | 255;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+		port->read_status_mask |= UART011_DR_BE;
+
+	/*
+	 * Characters to ignore
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= UART011_DR_BE;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= UART011_DR_OE;
+	}
+
+	/*
+	 * Ignore all characters if CREAD is not set.
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_DR_RX;
+}
+
 static void
 pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		     struct ktermios *old)
@@ -1820,33 +1861,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	port->read_status_mask = UART011_DR_OE | 255;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
-	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
-		port->read_status_mask |= UART011_DR_BE;
-
-	/*
-	 * Characters to ignore
-	 */
-	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
-	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= UART011_DR_BE;
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns too (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= UART011_DR_OE;
-	}
-
-	/*
-	 * Ignore all characters if CREAD is not set.
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= UART_DUMMY_DR_RX;
+	pl011_setup_status_masks(port, termios);
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		pl011_enable_ms(port);
@@ -1901,6 +1916,27 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void
+sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios,
+		      struct ktermios *old)
+{
+	struct uart_amba_port *uap =
+	    container_of(port, struct uart_amba_port, port);
+	unsigned long flags;
+
+	tty_termios_encode_baud_rate(termios, uap->fixed_baud, uap->fixed_baud);
+
+	/* The SBSA UART only supports 8n1 without hardware flow control. */
+	termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
+	termios->c_cflag &= ~(CMSPAR | CRTSCTS);
+	termios->c_cflag |= CS8 | CLOCAL;
+
+	spin_lock_irqsave(&port->lock, flags);
+	uart_update_timeout(port, CS8, uap->fixed_baud);
+	pl011_setup_status_masks(port, termios);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
 static const char *pl011_type(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1976,6 +2012,37 @@ static struct uart_ops amba_pl011_pops = {
 #endif
 };
 
+static void sbsa_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int sbsa_uart_get_mctrl(struct uart_port *port)
+{
+	return 0;
+}
+
+static const struct uart_ops sbsa_uart_pops = {
+	.tx_empty	= pl011_tx_empty,
+	.set_mctrl	= sbsa_uart_set_mctrl,
+	.get_mctrl	= sbsa_uart_get_mctrl,
+	.stop_tx	= pl011_stop_tx,
+	.start_tx	= pl011_start_tx,
+	.stop_rx	= pl011_stop_rx,
+	.startup	= sbsa_uart_startup,
+	.shutdown	= sbsa_uart_shutdown,
+	.set_termios	= sbsa_uart_set_termios,
+	.type		= pl011_type,
+	.release_port	= pl011_release_port,
+	.request_port	= pl011_request_port,
+	.config_port	= pl011_config_port,
+	.verify_port	= pl011_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_init     = pl011_hwinit,
+	.poll_get_char = pl011_get_poll_char,
+	.poll_put_char = pl011_put_poll_char,
+#endif
+};
+
 static struct uart_amba_port *amba_ports[UART_NR];
 
 #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
@@ -1994,7 +2061,7 @@ static void
 pl011_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_amba_port *uap = amba_ports[co->index];
-	unsigned int status, old_cr, new_cr;
+	unsigned int status, old_cr = 0, new_cr;
 	unsigned long flags;
 	int locked = 1;
 
@@ -2011,10 +2078,12 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 	/*
 	 *	First save the CR then disable the interrupts
 	 */
-	old_cr = readw(uap->port.membase + UART011_CR);
-	new_cr = old_cr & ~UART011_CR_CTSEN;
-	new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
-	writew(new_cr, uap->port.membase + UART011_CR);
+	if (!uap->vendor->always_enabled) {
+		old_cr = readw(uap->port.membase + UART011_CR);
+		new_cr = old_cr & ~UART011_CR_CTSEN;
+		new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+		writew(new_cr, uap->port.membase + UART011_CR);
+	}
 
 	uart_console_write(&uap->port, s, count, pl011_console_putchar);
 
@@ -2025,7 +2094,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 	do {
 		status = readw(uap->port.membase + UART01x_FR);
 	} while (status & UART01x_FR_BUSY);
-	writew(old_cr, uap->port.membase + UART011_CR);
+	if (!uap->vendor->always_enabled)
+		writew(old_cr, uap->port.membase + UART011_CR);
 
 	if (locked)
 		spin_unlock(&uap->port.lock);
@@ -2106,10 +2176,15 @@ static int __init pl011_console_setup(struct console *co, char *options)
 
 	uap->port.uartclk = clk_get_rate(uap->clk);
 
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	else
-		pl011_console_get_options(uap, &baud, &parity, &bits);
+	if (uap->vendor->fixed_options) {
+		baud = uap->fixed_baud;
+	} else {
+		if (options)
+			uart_parse_options(options,
+					   &baud, &parity, &bits, &flow);
+		else
+			pl011_console_get_options(uap, &baud, &parity, &bits);
+	}
 
 	return uart_set_options(&uap->port, co, baud, parity, bits, flow);
 }
@@ -2201,97 +2276,126 @@ static int pl011_probe_dt_alias(int index, struct device *dev)
 	return ret;
 }
 
-static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+/* unregisters the driver also if no more ports are left */
+static void pl011_unregister_port(struct uart_amba_port *uap)
 {
-	struct uart_amba_port *uap;
-	struct vendor_data *vendor = id->data;
-	void __iomem *base;
-	int i, ret;
+	int i;
+	bool busy = false;
+
+	for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
+		if (amba_ports[i] == uap)
+			amba_ports[i] = NULL;
+		else if (amba_ports[i])
+			busy = true;
+	}
+	pl011_dma_remove(uap);
+	if (!busy)
+		uart_unregister_driver(&amba_reg);
+}
+
+static int pl011_find_free_port(void)
+{
+	int i;
 
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
 		if (amba_ports[i] == NULL)
-			break;
-
-	if (i == ARRAY_SIZE(amba_ports))
-		return -EBUSY;
+			return i;
 
-	uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
-			   GFP_KERNEL);
-	if (uap == NULL)
-		return -ENOMEM;
+	return -EBUSY;
+}
 
-	i = pl011_probe_dt_alias(i, &dev->dev);
+static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
+			    struct resource *mmiobase, int index)
+{
+	void __iomem *base;
 
-	base = devm_ioremap(&dev->dev, dev->res.start,
-			    resource_size(&dev->res));
+	base = devm_ioremap_resource(dev, mmiobase);
 	if (!base)
 		return -ENOMEM;
 
-	uap->clk = devm_clk_get(&dev->dev, NULL);
-	if (IS_ERR(uap->clk))
-		return PTR_ERR(uap->clk);
+	index = pl011_probe_dt_alias(index, dev);
 
-	uap->vendor = vendor;
-	uap->lcrh_rx = vendor->lcrh_rx;
-	uap->lcrh_tx = vendor->lcrh_tx;
 	uap->old_cr = 0;
-	uap->fifosize = vendor->get_fifosize(dev);
-	uap->port.dev = &dev->dev;
-	uap->port.mapbase = dev->res.start;
+	uap->port.dev = dev;
+	uap->port.mapbase = mmiobase->start;
 	uap->port.membase = base;
 	uap->port.iotype = UPIO_MEM;
-	uap->port.irq = dev->irq[0];
 	uap->port.fifosize = uap->fifosize;
-	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
-	uap->port.line = i;
-	INIT_DELAYED_WORK(&uap->tx_softirq_work, pl011_tx_softirq);
+	uap->port.line = index;
 
-	/* Ensure interrupts from this UART are masked and cleared */
-	writew(0, uap->port.membase + UART011_IMSC);
-	writew(0xffff, uap->port.membase + UART011_ICR);
+	amba_ports[index] = uap;
 
-	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+	return 0;
+}
 
-	amba_ports[i] = uap;
+static int pl011_register_port(struct uart_amba_port *uap)
+{
+	int ret;
 
-	amba_set_drvdata(dev, uap);
+	/* Ensure interrupts from this UART are masked and cleared */
+	writew(0, uap->port.membase + UART011_IMSC);
+	writew(0xffff, uap->port.membase + UART011_ICR);
 
 	if (!amba_reg.state) {
 		ret = uart_register_driver(&amba_reg);
 		if (ret < 0) {
-			dev_err(&dev->dev,
+			dev_err(uap->port.dev,
 				"Failed to register AMBA-PL011 driver\n");
 			return ret;
 		}
 	}
 
 	ret = uart_add_one_port(&amba_reg, &uap->port);
-	if (ret) {
-		amba_ports[i] = NULL;
-		uart_unregister_driver(&amba_reg);
-	}
+	if (ret)
+		pl011_unregister_port(uap);
 
 	return ret;
 }
 
+static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+{
+	struct uart_amba_port *uap;
+	struct vendor_data *vendor = id->data;
+	int portnr, ret;
+
+	portnr = pl011_find_free_port();
+	if (portnr < 0)
+		return portnr;
+
+	uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
+			   GFP_KERNEL);
+	if (!uap)
+		return -ENOMEM;
+
+	uap->clk = devm_clk_get(&dev->dev, NULL);
+	if (IS_ERR(uap->clk))
+		return PTR_ERR(uap->clk);
+
+	uap->vendor = vendor;
+	uap->lcrh_rx = vendor->lcrh_rx;
+	uap->lcrh_tx = vendor->lcrh_tx;
+	uap->fifosize = vendor->get_fifosize(dev);
+	uap->port.irq = dev->irq[0];
+	uap->port.ops = &amba_pl011_pops;
+
+	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+
+	ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
+	if (ret)
+		return ret;
+
+	amba_set_drvdata(dev, uap);
+
+	return pl011_register_port(uap);
+}
+
 static int pl011_remove(struct amba_device *dev)
 {
 	struct uart_amba_port *uap = amba_get_drvdata(dev);
-	bool busy = false;
-	int i;
 
 	uart_remove_one_port(&amba_reg, &uap->port);
-
-	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
-		if (amba_ports[i] == uap)
-			amba_ports[i] = NULL;
-		else if (amba_ports[i])
-			busy = true;
-
-	pl011_dma_remove(uap);
-	if (!busy)
-		uart_unregister_driver(&amba_reg);
+	pl011_unregister_port(uap);
 	return 0;
 }
 
@@ -2319,6 +2423,86 @@ static int pl011_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
 
+static int sbsa_uart_probe(struct platform_device *pdev)
+{
+	struct uart_amba_port *uap;
+	struct resource *r;
+	int portnr, ret;
+	int baudrate;
+
+	/*
+	 * Check the mandatory baud rate parameter in the DT node early
+	 * so that we can easily exit with the error.
+	 */
+	if (pdev->dev.of_node) {
+		struct device_node *np = pdev->dev.of_node;
+
+		ret = of_property_read_u32(np, "current-speed", &baudrate);
+		if (ret)
+			return ret;
+	} else {
+		baudrate = 115200;
+	}
+
+	portnr = pl011_find_free_port();
+	if (portnr < 0)
+		return portnr;
+
+	uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+			   GFP_KERNEL);
+	if (!uap)
+		return -ENOMEM;
+
+	uap->vendor	= &vendor_sbsa;
+	uap->fifosize	= 32;
+	uap->port.irq	= platform_get_irq(pdev, 0);
+	uap->port.ops	= &sbsa_uart_pops;
+	uap->fixed_baud = baudrate;
+
+	snprintf(uap->type, sizeof(uap->type), "SBSA");
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	ret = pl011_setup_port(&pdev->dev, uap, r, portnr);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, uap);
+
+	return pl011_register_port(uap);
+}
+
+static int sbsa_uart_remove(struct platform_device *pdev)
+{
+	struct uart_amba_port *uap = platform_get_drvdata(pdev);
+
+	uart_remove_one_port(&amba_reg, &uap->port);
+	pl011_unregister_port(uap);
+	return 0;
+}
+
+static const struct of_device_id sbsa_uart_of_match[] = {
+	{ .compatible = "arm,sbsa-uart", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
+
+static const struct acpi_device_id sbsa_uart_acpi_match[] = {
+	{ "ARMH0011", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
+
+static struct platform_driver arm_sbsa_uart_platform_driver = {
+	.probe		= sbsa_uart_probe,
+	.remove		= sbsa_uart_remove,
+	.driver	= {
+		.name	= "sbsa-uart",
+		.of_match_table = of_match_ptr(sbsa_uart_of_match),
+		.acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
+	},
+};
+
 static struct amba_id pl011_ids[] = {
 	{
 		.id	= 0x00041011,
@@ -2349,11 +2533,14 @@ static int __init pl011_init(void)
 {
 	printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
 
+	if (platform_driver_register(&arm_sbsa_uart_platform_driver))
+		pr_warn("could not register SBSA UART platform driver\n");
 	return amba_driver_register(&pl011_driver);
 }
 
 static void __exit pl011_exit(void)
 {
+	platform_driver_unregister(&arm_sbsa_uart_platform_driver);
 	amba_driver_unregister(&pl011_driver);
 }
 
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 27dade2..2a8f5281 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -165,6 +165,7 @@ struct atmel_uart_port {
 	struct tasklet_struct	tasklet;
 	unsigned int		irq_status;
 	unsigned int		irq_status_prev;
+	unsigned int		status_change;
 
 	struct circ_buf		rx_ring;
 
@@ -315,8 +316,7 @@ static int atmel_config_rs485(struct uart_port *port,
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
 		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
-		if ((rs485conf->delay_rts_after_send) > 0)
-			UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
+		UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
 		dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -354,8 +354,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 
 	/* override mode to RS485 if needed, otherwise keep the current mode */
 	if (port->rs485.flags & SER_RS485_ENABLED) {
-		if ((port->rs485.delay_rts_after_send) > 0)
-			UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+		UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
 		mode &= ~ATMEL_US_USMODE;
 		mode |= ATMEL_US_USMODE_RS485;
 	}
@@ -1177,6 +1176,9 @@ atmel_handle_status(struct uart_port *port, unsigned int pending,
 	if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
 				| ATMEL_US_CTSIC)) {
 		atmel_port->irq_status = status;
+		atmel_port->status_change = atmel_port->irq_status ^
+					    atmel_port->irq_status_prev;
+		atmel_port->irq_status_prev = status;
 		tasklet_schedule(&atmel_port->tasklet);
 	}
 }
@@ -1523,17 +1525,14 @@ static void atmel_tasklet_func(unsigned long data)
 {
 	struct uart_port *port = (struct uart_port *)data;
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	unsigned int status;
-	unsigned int status_change;
+	unsigned int status = atmel_port->irq_status;
+	unsigned int status_change = atmel_port->status_change;
 
 	/* The interrupt handler does not take the lock */
 	spin_lock(&port->lock);
 
 	atmel_port->schedule_tx(port);
 
-	status = atmel_port->irq_status;
-	status_change = status ^ atmel_port->irq_status_prev;
-
 	if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
 				| ATMEL_US_DCD | ATMEL_US_CTS)) {
 		/* TODO: All reads to CSR will clear these interrupts! */
@@ -1548,7 +1547,7 @@ static void atmel_tasklet_func(unsigned long data)
 
 		wake_up_interruptible(&port->state->port.delta_msr_wait);
 
-		atmel_port->irq_status_prev = status;
+		atmel_port->status_change = 0;
 	}
 
 	atmel_port->schedule_rx(port);
@@ -2061,8 +2060,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* mode */
 	if (port->rs485.flags & SER_RS485_ENABLED) {
-		if ((port->rs485.delay_rts_after_send) > 0)
-			UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+		UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else if (termios->c_cflag & CRTSCTS) {
 		/* RS232 with hardware handshake (RTS/CTS) */
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 155781e..ae3cf94 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -74,8 +74,8 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
 
 static void bfin_serial_reset_irda(struct uart_port *port);
 
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
 static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -110,7 +110,7 @@ static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id)
 	struct bfin_serial_port *uart = dev_id;
 	struct uart_port *uport = &uart->port;
 	unsigned int status = bfin_serial_get_mctrl(uport);
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
 
 	UART_CLEAR_SCTS(uart);
 	if (uport->hw_stopped) {
@@ -700,7 +700,7 @@ static int bfin_serial_startup(struct uart_port *port)
 # endif
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
 		if (request_irq(gpio_to_irq(uart->cts_pin),
 			bfin_serial_mctrl_cts_int,
@@ -718,7 +718,7 @@ static int bfin_serial_startup(struct uart_port *port)
 			gpio_direction_output(uart->rts_pin, 0);
 	}
 #endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
 	if (uart->cts_pin >= 0) {
 		if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
 			0, "BFIN_UART_MODEM_STATUS", uart)) {
@@ -766,13 +766,13 @@ static void bfin_serial_shutdown(struct uart_port *port)
 	free_irq(uart->tx_irq, uart);
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0)
 		free_irq(gpio_to_irq(uart->cts_pin), uart);
 	if (uart->rts_pin >= 0)
 		gpio_free(uart->rts_pin);
 #endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
 	if (uart->cts_pin >= 0)
 		free_irq(uart->status_irq, uart);
 #endif
@@ -788,7 +788,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned int ier, lcr = 0;
 	unsigned long timeout;
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
 	if (old == NULL && uart->cts_pin != -1)
 		termios->c_cflag |= CRTSCTS;
 	else if (uart->cts_pin == -1)
@@ -1110,8 +1110,8 @@ bfin_serial_console_setup(struct console *co, char *options)
 	int baud = 57600;
 	int bits = 8;
 	int parity = 'n';
-# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+# if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
 	int flow = 'r';
 # else
 	int flow = 'n';
@@ -1322,8 +1322,8 @@ static int bfin_serial_probe(struct platform_device *pdev)
 		init_timer(&(uart->rx_dma_timer));
 #endif
 
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
 		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 		if (res == NULL)
 			uart->cts_pin = -1;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 0c1825b..3e4470a 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -56,10 +56,6 @@ static char *serial_version = "$Revision: 1.25 $";
 #error "RX_TIMEOUT_TICKS == 0 not allowed, use 1"
 #endif
 
-#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G"
-#endif
-
 /*
  * All of the compatibilty code so we can compile serial.c against
  * older kernels is hidden in serial_compat.h
@@ -455,30 +451,6 @@ static struct e100_serial rs_table[] = {
 static struct fast_timer fast_timers[NR_PORTS];
 #endif
 
-#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY
-#define PROCSTAT(x) x
-struct ser_statistics_type {
-	int overrun_cnt;
-	int early_errors_cnt;
-	int ser_ints_ok_cnt;
-	int errors_cnt;
-	unsigned long int processing_flip;
-	unsigned long processing_flip_still_room;
-	unsigned long int timeout_flush_cnt;
-	int rx_dma_ints;
-	int tx_dma_ints;
-	int rx_tot;
-	int tx_tot;
-};
-
-static struct ser_statistics_type ser_stat[NR_PORTS];
-
-#else
-
-#define PROCSTAT(x)
-
-#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */
-
 /* RS-485 */
 #if defined(CONFIG_ETRAX_RS485)
 #ifdef CONFIG_ETRAX_FAST_TIMER
@@ -487,9 +459,6 @@ static struct fast_timer fast_timers_rs485[NR_PORTS];
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
 static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT;
 #endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT;
-#endif
 #endif
 
 /* Info and macros needed for each ports extra control/status signals. */
@@ -739,10 +708,10 @@ static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF};
     defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \
     defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \
     defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED)
-#define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+#define ETRAX_SERX_DTR_RI_DSR_CD_MIXED
 #endif
 
-#ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+#ifdef ETRAX_SERX_DTR_RI_DSR_CD_MIXED
 /* The pins can be mixed on PA and PB */
 #define CONTROL_PINS_PORT_NOT_USED(line) \
   &dummy_ser[line], &dummy_ser[line], \
@@ -835,7 +804,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 #endif
 	}
 };
-#else  /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+#else  /* ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
 
 /* All pins are on either PA or PB for each serial port */
 #define CONTROL_PINS_PORT_NOT_USED(line) \
@@ -917,7 +886,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 #endif
 	}
 };
-#endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+#endif /* !ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
 
 #define E100_RTS_MASK 0x20
 #define E100_CTS_MASK 0x40
@@ -1367,16 +1336,6 @@ e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
 	*R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit);
 #endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-	REG_SHADOW_SET(R_PORT_G_DATA,  port_g_data_shadow,
-		       rs485_port_g_bit, 1);
-#endif
-#if defined(CONFIG_ETRAX_RS485_LTC1387)
-	REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-		       CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1);
-	REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-		       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
-#endif
 
 	info->rs485 = *r;
 
@@ -1676,7 +1635,8 @@ alloc_recv_buffer(unsigned int size)
 {
 	struct etrax_recv_buffer *buffer;
 
-	if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
+	buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC);
+	if (!buffer)
 		return NULL;
 
 	buffer->next = NULL;
@@ -1712,7 +1672,8 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl
 {
 	struct etrax_recv_buffer *buffer;
 	if (info->uses_dma_in) {
-		if (!(buffer = alloc_recv_buffer(4)))
+		buffer = alloc_recv_buffer(4);
+		if (!buffer)
 			return 0;
 
 		buffer->length = 1;
@@ -1750,7 +1711,8 @@ static unsigned int handle_descr_data(struct e100_serial *info,
 
 	append_recv_buffer(info, buffer);
 
-	if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+	buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
+	if (!buffer)
 		panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
 
 	descr->buf = virt_to_phys(buffer->buffer);
@@ -1841,7 +1803,6 @@ static void receive_chars_dma(struct e100_serial *info)
 		 */
 		unsigned char data = info->ioport[REG_DATA];
 
-		PROCSTAT(ser_stat[info->line].errors_cnt++);
 		DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
 			  ((rstat & SER_ERROR_MASK) << 8) | data);
 
@@ -1867,7 +1828,8 @@ static int start_recv_dma(struct e100_serial *info)
 
 	/* Set up the receiving descriptors */
 	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
-		if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+		buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
+		if (!buffer)
 			panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
 
 		descr[i].ctrl = d_int;
@@ -1943,7 +1905,6 @@ tr_interrupt(int irq, void *dev_id)
 			/* Read jiffies_usec first,
 			 * we want this time to be as late as possible
 			 */
- 			PROCSTAT(ser_stat[info->line].tx_dma_ints++);
 			info->last_tx_active_usec = GET_JIFFIES_USEC();
 			info->last_tx_active = jiffies;
 			transmit_chars_dma(info);
@@ -2022,7 +1983,6 @@ static int force_eop_if_needed(struct e100_serial *info)
 	 */
 	if (!info->forced_eop) {
 		info->forced_eop = 1;
-		PROCSTAT(ser_stat[info->line].timeout_flush_cnt++);
 		TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line));
 		FORCE_EOP(info);
 	}
@@ -2374,7 +2334,6 @@ static void handle_ser_rx_interrupt(struct e100_serial *info)
 			DEBUG_LOG(info->line, "#iERR s d %04X\n",
 			          ((rstat & SER_ERROR_MASK) << 8) | data);
 		}
-		PROCSTAT(ser_stat[info->line].early_errors_cnt++);
 	} else { /* It was a valid byte, now let the DMA do the rest */
 		unsigned long curr_time_u = GET_JIFFIES_USEC();
 		unsigned long curr_time = jiffies;
@@ -2407,7 +2366,6 @@ static void handle_ser_rx_interrupt(struct e100_serial *info)
 		DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line));
 		info->break_detected_cnt = 0;
 
-		PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++);
 	}
 	/* Restarting the DMA never hurts */
 	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
@@ -2867,19 +2825,6 @@ change_speed(struct e100_serial *info)
 			*R_SERIAL_PRESCALE = divisor;
 			info->baud = SERIAL_PRESCALE_BASE/divisor;
 		}
-#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED
-		else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 &&
-			  info->custom_divisor == 1) ||
-			 (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ &&
-			  info->custom_divisor == 8)) {
-				/* ext_clk selected */
-				alt_source =
-					IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) |
-					IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern);
-				DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8));
-				info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8;
-			}
-#endif
 		else
 		{
 			/* Bad baudbase, we don't support using timer0
@@ -3216,9 +3161,7 @@ rs_throttle(struct tty_struct * tty)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 #ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-
-	printk("throttle %s: %lu....\n", tty_name(tty, buf),
+	printk("throttle %s: %lu....\n", tty_name(tty),
 	       (unsigned long)tty->ldisc.chars_in_buffer(tty));
 #endif
 	DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
@@ -3238,9 +3181,7 @@ rs_unthrottle(struct tty_struct * tty)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 #ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-
-	printk("unthrottle %s: %lu....\n", tty_name(tty, buf),
+	printk("unthrottle %s: %lu....\n", tty_name(tty),
 	       (unsigned long)tty->ldisc.chars_in_buffer(tty));
 #endif
 	DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
@@ -3725,16 +3666,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
 		*R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
 #endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-			       rs485_port_g_bit, 0);
-#endif
-#if defined(CONFIG_ETRAX_RS485_LTC1387)
-		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-			       CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0);
-		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-			       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0);
-#endif
 	}
 #endif
 
@@ -4263,15 +4194,6 @@ static int __init rs_init(void)
 		return -EBUSY;
 	}
 #endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-	if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
-			rs485_port_g_bit)) {
-		printk(KERN_ERR "ETRAX100LX serial: Could not allocate "
-			"RS485 pin\n");
-		put_tty_driver(driver);
-		return -EBUSY;
-	}
-#endif
 #endif
 
 	/* Initialize the tty_driver structure */
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 6dc471e..f096360 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -72,6 +72,7 @@ static int __init parse_options(struct earlycon_device *device, char *options)
 
 	switch (port->iotype) {
 	case UPIO_MEM32:
+	case UPIO_MEM32BE:
 		port->regshift = 2;	/* fall-through */
 	case UPIO_MEM:
 		port->mapbase = addr;
@@ -90,9 +91,11 @@ static int __init parse_options(struct earlycon_device *device, char *options)
 		strlcpy(device->options, options, length);
 	}
 
-	if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32)
+	if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32 ||
+	    port->iotype == UPIO_MEM32BE)
 		pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
-			(port->iotype == UPIO_MEM32) ? "32" : "",
+			(port->iotype == UPIO_MEM) ? "" :
+			(port->iotype == UPIO_MEM32) ? "32" : "32be",
 			(unsigned long long)port->mapbase,
 			device->options);
 	else
@@ -133,7 +136,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
  *
  *	Registers the earlycon console matching the earlycon specified
  *	in the param string @buf. Acceptable param strings are of the form
- *	   <name>,io|mmio|mmio32,<addr>,<options>
+ *	   <name>,io|mmio|mmio32|mmio32be,<addr>,<options>
  *	   <name>,0x<addr>,<options>
  *	   <name>,<options>
  *	   <name>
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 45fc323..ffc7cb2 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1504,7 +1504,8 @@ static int icom_probe(struct pci_dev *dev,
 		return retval;
 	}
 
-	if ( (retval = pci_request_regions(dev, "icom"))) {
+	retval = pci_request_regions(dev, "icom");
+	if (retval) {
 		 dev_err(&dev->dev, "pci_request_regions FAILED\n");
 		 pci_disable_device(dev);
 		 return retval;
@@ -1512,7 +1513,8 @@ static int icom_probe(struct pci_dev *dev,
 
 	pci_set_master(dev);
 
-	if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
+	retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg);
+	if (retval) {
 		dev_err(&dev->dev, "PCI Config read FAILED\n");
 		return retval;
 	}
@@ -1556,9 +1558,8 @@ static int icom_probe(struct pci_dev *dev,
 	}
 
 	 /* save off irq and request irq line */
-	 if ( (retval = request_irq(dev->irq, icom_interrupt,
-				   IRQF_SHARED, ICOM_DRIVER_NAME,
-				   (void *) icom_adapter))) {
+	 retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter);
+	 if (retval) {
 		  goto probe_exit2;
 	 }
 
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 5903909..536a33b 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1175,7 +1175,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out),
 			  ifx_spi_reset_interrupt,
 			  IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME,
-		(void *)ifx_dev);
+			  ifx_dev);
 	if (ret) {
 		dev_err(&spi->dev, "Unable to get irq %x\n",
 			gpio_to_irq(ifx_dev->gpio.reset_out));
@@ -1185,9 +1185,8 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	ret = ifx_spi_reset(ifx_dev);
 
 	ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy),
-			  ifx_spi_srdy_interrupt,
-			  IRQF_TRIGGER_RISING, DRVNAME,
-			  (void *)ifx_dev);
+			  ifx_spi_srdy_interrupt, IRQF_TRIGGER_RISING, DRVNAME,
+			  ifx_dev);
 	if (ret) {
 		dev_err(&spi->dev, "Unable to get irq %x",
 			gpio_to_irq(ifx_dev->gpio.srdy));
@@ -1212,7 +1211,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	return 0;
 
 error_ret7:
-	free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
+	free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev);
 error_ret6:
 	gpio_free(ifx_dev->gpio.srdy);
 error_ret5:
@@ -1243,8 +1242,8 @@ static int ifx_spi_spi_remove(struct spi_device *spi)
 	/* stop activity */
 	tasklet_kill(&ifx_dev->io_work_tasklet);
 	/* free irq */
-	free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
-	free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev);
+	free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev);
+	free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev);
 
 	gpio_free(ifx_dev->gpio.srdy);
 	gpio_free(ifx_dev->gpio.mrdy);
@@ -1381,7 +1380,7 @@ static void __exit ifx_spi_exit(void)
 	/* unregister */
 	tty_unregister_driver(tty_drv);
 	put_tty_driver(tty_drv);
-	spi_unregister_driver((void *)&ifx_spi_driver);
+	spi_unregister_driver(&ifx_spi_driver);
 	unregister_reboot_notifier(&ifx_modem_reboot_notifier_block);
 }
 
@@ -1420,7 +1419,7 @@ static int __init ifx_spi_init(void)
 		goto err_free_tty;
 	}
 
-	result = spi_register_driver((void *)&ifx_spi_driver);
+	result = spi_register_driver(&ifx_spi_driver);
 	if (result) {
 		pr_err("%s: spi_register_driver failed(%d)",
 			DRVNAME, result);
@@ -1436,7 +1435,7 @@ static int __init ifx_spi_init(void)
 
 	return 0;
 err_unreg_spi:
-	spi_unregister_driver((void *)&ifx_spi_driver);
+	spi_unregister_driver(&ifx_spi_driver);
 err_unreg_tty:
 	tty_unregister_driver(tty_drv);
 err_free_tty:
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8825039..2c90dc3 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -239,7 +239,7 @@ static struct imx_uart_data imx_uart_devdata[] = {
 	},
 };
 
-static struct platform_device_id imx_uart_devtype[] = {
+static const struct platform_device_id imx_uart_devtype[] = {
 	{
 		.name = "imx1-uart",
 		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
@@ -853,7 +853,7 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
 #define TXTL 2 /* reset default */
 #define RXTL 1 /* reset default */
 
-static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
+static void imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 {
 	unsigned int val;
 
@@ -861,7 +861,6 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 	val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
 	val |= TXTL << UFCR_TXTL_SHF | RXTL;
 	writel(val, sport->port.membase + UFCR);
-	return 0;
 }
 
 #define RX_BUF_SIZE	(PAGE_SIZE)
@@ -1122,6 +1121,12 @@ static int imx_startup(struct uart_port *port)
 
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
+	/* Can we enable the DMA support? */
+	if (is_imx6q_uart(sport) && !uart_console(port) &&
+	    !sport->dma_is_inited)
+		imx_uart_dma_init(sport);
+
+	spin_lock_irqsave(&sport->port.lock, flags);
 	/* Reset fifo's and state machines */
 	i = 100;
 
@@ -1132,13 +1137,6 @@ static int imx_startup(struct uart_port *port)
 	while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
 		udelay(1);
 
-	/* Can we enable the DMA support? */
-	if (is_imx6q_uart(sport) && !uart_console(port) &&
-	    !sport->dma_is_inited)
-		imx_uart_dma_init(sport);
-
-	spin_lock_irqsave(&sport->port.lock, flags);
-
 	/*
 	 * Finally, clear and enable interrupts
 	 */
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index abd7ea2..27b5fef 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -2137,7 +2137,8 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
 
 	/* register port with the serial core */
 
-	if ((ret = ioc3_serial_core_attach(is, idd)))
+	ret = ioc3_serial_core_attach(is, idd);
+	if (ret)
 		goto out4;
 
 	Num_of_ioc3_cards++;
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index aa28209..e5c42fe 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1011,7 +1011,8 @@ static irqreturn_t ioc4_intr(int irq, void *arg)
 		 */
 		for (xx = 0; xx < num_intrs; xx++) {
 			intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx];
-			if ((this_mir = this_ir & intr_info->sd_bits)) {
+			this_mir = this_ir & intr_info->sd_bits;
+			if (this_mir) {
 				/* Disable owned interrupts, call handler */
 				handled++;
 				write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC,
@@ -2865,10 +2866,12 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
 
 	/* register port with the serial core - 1 rs232, 1 rs422 */
 
-	if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232)))
+	ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232);
+	if (ret)
 		goto out4;
 
-	if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422)))
+	ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422);
+	if (ret)
 		goto out5;
 
 	Num_of_ioc4_cards++;
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 129dc5b..117df15 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -173,18 +173,18 @@ static int kgdb_nmi_poll_one_knock(void)
 bool kgdb_nmi_poll_knock(void)
 {
 	if (kgdb_nmi_knock < 0)
-		return 1;
+		return true;
 
 	while (1) {
 		int ret;
 
 		ret = kgdb_nmi_poll_one_knock();
 		if (ret == NO_POLL_CHAR)
-			return 0;
+			return false;
 		else if (ret == 1)
 			break;
 	}
-	return 1;
+	return true;
 }
 
 /*
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index a9b0ab3..02eb322 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -597,7 +597,7 @@ console_initcall(mcf_console_init);
 #define	MCF_CONSOLE	NULL
 
 /****************************************************************************/
-#endif /* CONFIG_MCF_CONSOLE */
+#endif /* CONFIG_SERIAL_MCF_CONSOLE */
 /****************************************************************************/
 
 /*
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 67c0367..0fc83c9 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -370,7 +370,7 @@ static int meson_uart_verify_port(struct uart_port *port,
 static void meson_uart_release_port(struct uart_port *port)
 {
 	if (port->flags & UPF_IOREMAP) {
-		iounmap(port->membase);
+		devm_iounmap(port->dev, port->membase);
 		port->membase = NULL;
 	}
 }
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 1589f17..6fc07eb 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -405,7 +405,7 @@ static struct psc_ops mpc5200b_psc_ops = {
 	.get_mr1 = mpc52xx_psc_get_mr1,
 };
 
-#endif /* CONFIG_MPC52xx */
+#endif /* CONFIG_PPC_MPC52xx */
 
 #ifdef CONFIG_PPC_MPC512x
 #define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 856fd5a..82bb6d1 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -913,7 +913,8 @@ static int mpsc_make_ready(struct mpsc_port_info *pi)
 
 	if (!pi->ready) {
 		mpsc_init_hw(pi);
-		if ((rc = mpsc_alloc_ring_mem(pi)))
+		rc = mpsc_alloc_ring_mem(pi);
+		if (rc)
 			return rc;
 		mpsc_init_rings(pi);
 		pi->ready = 1;
@@ -1895,7 +1896,8 @@ static int mpsc_shared_drv_probe(struct platform_device *dev)
 	int				 rc = -ENODEV;
 
 	if (dev->id == 0) {
-		if (!(rc = mpsc_shared_map_regs(dev))) {
+		rc = mpsc_shared_map_regs(dev);
+		if (!rc) {
 			pdata = (struct mpsc_shared_pdata *)
 				dev_get_platdata(&dev->dev);
 
@@ -2081,14 +2083,16 @@ static int mpsc_drv_probe(struct platform_device *dev)
 	if (dev->id < MPSC_NUM_CTLRS) {
 		pi = &mpsc_ports[dev->id];
 
-		if (!(rc = mpsc_drv_map_regs(pi, dev))) {
+		rc = mpsc_drv_map_regs(pi, dev);
+		if (!rc) {
 			mpsc_drv_get_platform_data(pi, dev, dev->id);
 			pi->port.dev = &dev->dev;
 
-			if (!(rc = mpsc_make_ready(pi))) {
+			rc = mpsc_make_ready(pi);
+			if (!rc) {
 				spin_lock_init(&pi->tx_lock);
-				if (!(rc = uart_add_one_port(&mpsc_reg,
-								&pi->port))) {
+				rc = uart_add_one_port(&mpsc_reg, &pi->port);
+				if (!rc) {
 					rc = 0;
 				} else {
 					mpsc_release_port((struct uart_port *)
@@ -2136,9 +2140,12 @@ static int __init mpsc_drv_init(void)
 	memset(mpsc_ports, 0, sizeof(mpsc_ports));
 	memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
 
-	if (!(rc = uart_register_driver(&mpsc_reg))) {
-		if (!(rc = platform_driver_register(&mpsc_shared_driver))) {
-			if ((rc = platform_driver_register(&mpsc_driver))) {
+	rc = uart_register_driver(&mpsc_reg);
+	if (!rc) {
+		rc = platform_driver_register(&mpsc_shared_driver);
+		if (!rc) {
+			rc = platform_driver_register(&mpsc_driver);
+			if (rc) {
 				platform_driver_unregister(&mpsc_shared_driver);
 				uart_unregister_driver(&mpsc_reg);
 			}
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
deleted file mode 100644
index 1238ac3..0000000
--- a/drivers/tty/serial/msm_smd_tty.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-
-#include <mach/msm_smd.h>
-
-#define MAX_SMD_TTYS 32
-
-struct smd_tty_info {
-	struct tty_port port;
-	smd_channel_t *ch;
-};
-
-struct smd_tty_channel_desc {
-	int id;
-	const char *name;
-};
-
-static struct smd_tty_info smd_tty[MAX_SMD_TTYS];
-
-static const struct smd_tty_channel_desc smd_default_tty_channels[] = {
-	{ .id = 0, .name = "SMD_DS" },
-	{ .id = 27, .name = "SMD_GPSNMEA" },
-};
-
-static const struct smd_tty_channel_desc *smd_tty_channels =
-		smd_default_tty_channels;
-static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels);
-
-static void smd_tty_notify(void *priv, unsigned event)
-{
-	unsigned char *ptr;
-	int avail;
-	struct smd_tty_info *info = priv;
-	struct tty_struct *tty;
-
-	if (event != SMD_EVENT_DATA)
-		return;
-
-	tty = tty_port_tty_get(&info->port);
-	if (!tty)
-		return;
-
-	for (;;) {
-		if (test_bit(TTY_THROTTLED, &tty->flags))
-			break;
-		avail = smd_read_avail(info->ch);
-		if (avail == 0)
-			break;
-
-		avail = tty_prepare_flip_string(&info->port, &ptr, avail);
-
-		if (smd_read(info->ch, ptr, avail) != avail) {
-			/* shouldn't be possible since we're in interrupt
-			** context here and nobody else could 'steal' our
-			** characters.
-			*/
-			pr_err("OOPS - smd_tty_buffer mismatch?!");
-		}
-
-		tty_flip_buffer_push(&info->port);
-	}
-
-	/* XXX only when writable and necessary */
-	tty_wakeup(tty);
-	tty_kref_put(tty);
-}
-
-static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
-{
-	struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
-			port);
-	int i, res = 0;
-	const char *name = NULL;
-
-	for (i = 0; i < smd_tty_channels_len; i++) {
-		if (smd_tty_channels[i].id == tty->index) {
-			name = smd_tty_channels[i].name;
-			break;
-		}
-	}
-	if (!name)
-		return -ENODEV;
-
-	if (info->ch)
-		smd_kick(info->ch);
-	else
-		res = smd_open(name, &info->ch, info, smd_tty_notify);
-
-	if (!res)
-		tty->driver_data = info;
-
-	return res;
-}
-
-static void smd_tty_port_shutdown(struct tty_port *tport)
-{
-	struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
-			port);
-
-	if (info->ch) {
-		smd_close(info->ch);
-		info->ch = 0;
-	}
-}
-
-static int smd_tty_open(struct tty_struct *tty, struct file *f)
-{
-	struct smd_tty_info *info = smd_tty + tty->index;
-
-	return tty_port_open(&info->port, tty, f);
-}
-
-static void smd_tty_close(struct tty_struct *tty, struct file *f)
-{
-	struct smd_tty_info *info = tty->driver_data;
-
-	tty_port_close(&info->port, tty, f);
-}
-
-static int smd_tty_write(struct tty_struct *tty,
-			 const unsigned char *buf, int len)
-{
-	struct smd_tty_info *info = tty->driver_data;
-	int avail;
-
-	/* if we're writing to a packet channel we will
-	** never be able to write more data than there
-	** is currently space for
-	*/
-	avail = smd_write_avail(info->ch);
-	if (len > avail)
-		len = avail;
-
-	return smd_write(info->ch, buf, len);
-}
-
-static int smd_tty_write_room(struct tty_struct *tty)
-{
-	struct smd_tty_info *info = tty->driver_data;
-	return smd_write_avail(info->ch);
-}
-
-static int smd_tty_chars_in_buffer(struct tty_struct *tty)
-{
-	struct smd_tty_info *info = tty->driver_data;
-	return smd_read_avail(info->ch);
-}
-
-static void smd_tty_unthrottle(struct tty_struct *tty)
-{
-	struct smd_tty_info *info = tty->driver_data;
-	smd_kick(info->ch);
-}
-
-static const struct tty_port_operations smd_tty_port_ops = {
-	.shutdown = smd_tty_port_shutdown,
-	.activate = smd_tty_port_activate,
-};
-
-static const struct tty_operations smd_tty_ops = {
-	.open = smd_tty_open,
-	.close = smd_tty_close,
-	.write = smd_tty_write,
-	.write_room = smd_tty_write_room,
-	.chars_in_buffer = smd_tty_chars_in_buffer,
-	.unthrottle = smd_tty_unthrottle,
-};
-
-static struct tty_driver *smd_tty_driver;
-
-static int __init smd_tty_init(void)
-{
-	int ret, i;
-
-	smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
-	if (smd_tty_driver == 0)
-		return -ENOMEM;
-
-	smd_tty_driver->driver_name = "smd_tty_driver";
-	smd_tty_driver->name = "smd";
-	smd_tty_driver->major = 0;
-	smd_tty_driver->minor_start = 0;
-	smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
-	smd_tty_driver->init_termios = tty_std_termios;
-	smd_tty_driver->init_termios.c_iflag = 0;
-	smd_tty_driver->init_termios.c_oflag = 0;
-	smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
-	smd_tty_driver->init_termios.c_lflag = 0;
-	smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
-		TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	tty_set_operations(smd_tty_driver, &smd_tty_ops);
-
-	ret = tty_register_driver(smd_tty_driver);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < smd_tty_channels_len; i++) {
-		struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port;
-		tty_port_init(port);
-		port->ops = &smd_tty_port_ops;
-		tty_port_register_device(port, smd_tty_driver,
-				smd_tty_channels[i].id, NULL);
-	}
-
-	return 0;
-}
-
-module_init(smd_tty_init);
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index f7e5825..13cf773 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -169,7 +169,7 @@ struct mxs_auart_port {
 	bool			ms_irq_enabled;
 };
 
-static struct platform_device_id mxs_auart_devtype[] = {
+static const struct platform_device_id mxs_auart_devtype[] = {
 	{ .name = "mxs-auart-imx23", .driver_data = IMX23_AUART },
 	{ .name = "mxs-auart-imx28", .driver_data = IMX28_AUART },
 	{ /* sentinel */ }
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 137381e..6823df9 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -67,14 +67,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	if (of_property_read_u32(np, "clock-frequency", &clk)) {
 
 		/* Get clk rate through clk driver if present */
-		info->clk = clk_get(&ofdev->dev, NULL);
+		info->clk = devm_clk_get(&ofdev->dev, NULL);
 		if (IS_ERR(info->clk)) {
 			dev_warn(&ofdev->dev,
 				"clk or clock-frequency not defined\n");
 			return PTR_ERR(info->clk);
 		}
 
-		clk_prepare_enable(info->clk);
+		ret = clk_prepare_enable(info->clk);
+		if (ret < 0)
+			return ret;
+
 		clk = clk_get_rate(info->clk);
 	}
 	/* If current-speed was set, then try not to change it. */
@@ -188,7 +191,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 	{
 		struct uart_8250_port port8250;
 		memset(&port8250, 0, sizeof(port8250));
-		port.type = port_type;
 		port8250.port = port;
 
 		if (port.fifosize)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index a0ae942..67d0c21 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -348,7 +348,7 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
 		s3c24xx_serial_start_tx_dma(ourport, count);
 }
 
-void s3c24xx_serial_start_tx(struct uart_port *port)
+static void s3c24xx_serial_start_tx(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	struct circ_buf *xmit = &port->state->xmit;
@@ -2337,7 +2337,7 @@ static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
 #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
 #endif
 
-static struct platform_device_id s3c24xx_serial_driver_ids[] = {
+static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	{
 		.name		= "s3c2410-uart",
 		.driver_data	= S3C2410_SERIAL_DRV_DATA,
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 468354e..9e65760 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -25,6 +25,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
+#include <linux/spi/spi.h>
 #include <linux/uaccess.h>
 
 #define SC16IS7XX_NAME			"sc16is7xx"
@@ -300,25 +301,38 @@ struct sc16is7xx_devtype {
 	int	nr_uart;
 };
 
+#define SC16IS7XX_RECONF_MD		(1 << 0)
+#define SC16IS7XX_RECONF_IER		(1 << 1)
+#define SC16IS7XX_RECONF_RS485		(1 << 2)
+
+struct sc16is7xx_one_config {
+	unsigned int			flags;
+	u8				ier_clear;
+};
+
 struct sc16is7xx_one {
 	struct uart_port		port;
-	struct work_struct		tx_work;
-	struct work_struct		md_work;
+	struct kthread_work		tx_work;
+	struct kthread_work		reg_work;
+	struct sc16is7xx_one_config	config;
 };
 
 struct sc16is7xx_port {
 	struct uart_driver		uart;
 	struct sc16is7xx_devtype	*devtype;
 	struct regmap			*regmap;
-	struct mutex			mutex;
 	struct clk			*clk;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip		gpio;
 #endif
 	unsigned char			buf[SC16IS7XX_FIFO_SIZE];
+	struct kthread_worker		kworker;
+	struct task_struct		*kworker_task;
+	struct kthread_work		irq_work;
 	struct sc16is7xx_one		p[0];
 };
 
+#define to_sc16is7xx_port(p,e)	((container_of((p), struct sc16is7xx_port, e)))
 #define to_sc16is7xx_one(p,e)	((container_of((p), struct sc16is7xx_one, e)))
 
 static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
@@ -615,9 +629,7 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
 					       !!(msr & SC16IS7XX_MSR_CTS_BIT));
 			break;
 		case SC16IS7XX_IIR_THRI_SRC:
-			mutex_lock(&s->mutex);
 			sc16is7xx_handle_tx(port);
-			mutex_unlock(&s->mutex);
 			break;
 		default:
 			dev_err_ratelimited(port->dev,
@@ -628,81 +640,115 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
 	} while (1);
 }
 
-static irqreturn_t sc16is7xx_ist(int irq, void *dev_id)
+static void sc16is7xx_ist(struct kthread_work *ws)
 {
-	struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+	struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work);
 	int i;
 
 	for (i = 0; i < s->uart.nr; ++i)
 		sc16is7xx_port_irq(s, i);
+}
+
+static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
+{
+	struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+
+	queue_kthread_work(&s->kworker, &s->irq_work);
 
 	return IRQ_HANDLED;
 }
 
-static void sc16is7xx_wq_proc(struct work_struct *ws)
+static void sc16is7xx_tx_proc(struct kthread_work *ws)
 {
-	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work);
-	struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev);
+	struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port);
+
+	if ((port->rs485.flags & SER_RS485_ENABLED) &&
+	    (port->rs485.delay_rts_before_send > 0))
+		msleep(port->rs485.delay_rts_before_send);
 
-	mutex_lock(&s->mutex);
-	sc16is7xx_handle_tx(&one->port);
-	mutex_unlock(&s->mutex);
+	sc16is7xx_handle_tx(port);
 }
 
-static void sc16is7xx_stop_tx(struct uart_port* port)
+static void sc16is7xx_reconf_rs485(struct uart_port *port)
 {
-	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
-	struct circ_buf *xmit = &one->port.state->xmit;
-
-	/* handle rs485 */
-	if (port->rs485.flags & SER_RS485_ENABLED) {
-		/* do nothing if current tx not yet completed */
-		int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
-		if (!(lsr & SC16IS7XX_LSR_TEMT_BIT))
-			return;
-
-		if (uart_circ_empty(xmit) &&
-		    (port->rs485.delay_rts_after_send > 0))
-			mdelay(port->rs485.delay_rts_after_send);
+	const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT |
+			 SC16IS7XX_EFCR_RTS_INVERT_BIT;
+	u32 efcr = 0;
+	struct serial_rs485 *rs485 = &port->rs485;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&port->lock, irqflags);
+	if (rs485->flags & SER_RS485_ENABLED) {
+		efcr |=	SC16IS7XX_EFCR_AUTO_RS485_BIT;
+
+		if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT;
 	}
+	spin_unlock_irqrestore(&port->lock, irqflags);
 
-	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
-			      SC16IS7XX_IER_THRI_BIT,
-			      0);
+	sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr);
 }
 
-static void sc16is7xx_stop_rx(struct uart_port* port)
+static void sc16is7xx_reg_proc(struct kthread_work *ws)
 {
+	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, reg_work);
+	struct sc16is7xx_one_config config;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&one->port.lock, irqflags);
+	config = one->config;
+	memset(&one->config, 0, sizeof(one->config));
+	spin_unlock_irqrestore(&one->port.lock, irqflags);
+
+	if (config.flags & SC16IS7XX_RECONF_MD)
+		sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG,
+				      SC16IS7XX_MCR_LOOP_BIT,
+				      (one->port.mctrl & TIOCM_LOOP) ?
+				      SC16IS7XX_MCR_LOOP_BIT : 0);
+
+	if (config.flags & SC16IS7XX_RECONF_IER)
+		sc16is7xx_port_update(&one->port, SC16IS7XX_IER_REG,
+				      config.ier_clear, 0);
+
+	if (config.flags & SC16IS7XX_RECONF_RS485)
+		sc16is7xx_reconf_rs485(&one->port);
+}
+
+static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
-	one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT;
-	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
-			      SC16IS7XX_LSR_DR_BIT,
-			      0);
+	one->config.flags |= SC16IS7XX_RECONF_IER;
+	one->config.ier_clear |= bit;
+	queue_kthread_work(&s->kworker, &one->reg_work);
+}
+
+static void sc16is7xx_stop_tx(struct uart_port *port)
+{
+	sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT);
+}
+
+static void sc16is7xx_stop_rx(struct uart_port *port)
+{
+	sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT);
 }
 
 static void sc16is7xx_start_tx(struct uart_port *port)
 {
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
-	/* handle rs485 */
-	if ((port->rs485.flags & SER_RS485_ENABLED) &&
-	    (port->rs485.delay_rts_before_send > 0)) {
-		mdelay(port->rs485.delay_rts_before_send);
-	}
-
-	if (!work_pending(&one->tx_work))
-		schedule_work(&one->tx_work);
+	queue_kthread_work(&s->kworker, &one->tx_work);
 }
 
 static unsigned int sc16is7xx_tx_empty(struct uart_port *port)
 {
-	unsigned int lvl, lsr;
+	unsigned int lsr;
 
-	lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
 	lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
 
-	return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0;
+	return (lsr & SC16IS7XX_LSR_TEMT_BIT) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int sc16is7xx_get_mctrl(struct uart_port *port)
@@ -713,21 +759,13 @@ static unsigned int sc16is7xx_get_mctrl(struct uart_port *port)
 	return TIOCM_DSR | TIOCM_CAR;
 }
 
-static void sc16is7xx_md_proc(struct work_struct *ws)
-{
-	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work);
-
-	sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG,
-			      SC16IS7XX_MCR_LOOP_BIT,
-			      (one->port.mctrl & TIOCM_LOOP) ?
-				      SC16IS7XX_MCR_LOOP_BIT : 0);
-}
-
 static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
-	schedule_work(&one->md_work);
+	one->config.flags |= SC16IS7XX_RECONF_MD;
+	queue_kthread_work(&s->kworker, &one->reg_work);
 }
 
 static void sc16is7xx_break_ctl(struct uart_port *port, int break_state)
@@ -831,9 +869,8 @@ static void sc16is7xx_set_termios(struct uart_port *port,
 static int sc16is7xx_config_rs485(struct uart_port *port,
 				  struct serial_rs485 *rs485)
 {
-	const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT |
-			 SC16IS7XX_EFCR_RTS_INVERT_BIT;
-	u32 efcr = 0;
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
 	if (rs485->flags & SER_RS485_ENABLED) {
 		bool rts_during_rx, rts_during_tx;
@@ -841,21 +878,23 @@ static int sc16is7xx_config_rs485(struct uart_port *port,
 		rts_during_rx = rs485->flags & SER_RS485_RTS_AFTER_SEND;
 		rts_during_tx = rs485->flags & SER_RS485_RTS_ON_SEND;
 
-		efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT;
-
-		if (!rts_during_rx && rts_during_tx)
-			/* default */;
-		else if (rts_during_rx && !rts_during_tx)
-			efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT;
-		else
+		if (rts_during_rx == rts_during_tx)
 			dev_err(port->dev,
 				"unsupported RTS signalling on_send:%d after_send:%d - exactly one of RS485 RTS flags should be set\n",
 				rts_during_tx, rts_during_rx);
-	}
 
-	sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr);
+		/*
+		 * RTS signal is handled by HW, it's timing can't be influenced.
+		 * However, it's sometimes useful to delay TX even without RTS
+		 * control therefore we try to handle .delay_rts_before_send.
+		 */
+		if (rs485->delay_rts_after_send)
+			return -EINVAL;
+	}
 
 	port->rs485 = *rs485;
+	one->config.flags |= SC16IS7XX_RECONF_RS485;
+	queue_kthread_work(&s->kworker, &one->reg_work);
 
 	return 0;
 }
@@ -916,6 +955,8 @@ static int sc16is7xx_startup(struct uart_port *port)
 
 static void sc16is7xx_shutdown(struct uart_port *port)
 {
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
 	/* Disable all interrupts */
 	sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
 	/* Disable TX/RX */
@@ -926,6 +967,8 @@ static void sc16is7xx_shutdown(struct uart_port *port)
 			      SC16IS7XX_EFCR_TXDISABLE_BIT);
 
 	sc16is7xx_power(port, 0);
+
+	flush_kthread_worker(&s->kworker);
 }
 
 static const char *sc16is7xx_type(struct uart_port *port)
@@ -1043,6 +1086,7 @@ static int sc16is7xx_probe(struct device *dev,
 			   struct sc16is7xx_devtype *devtype,
 			   struct regmap *regmap, int irq, unsigned long flags)
 {
+	struct sched_param sched_param = { .sched_priority = MAX_RT_PRIO / 2 };
 	unsigned long freq, *pfreq = dev_get_platdata(dev);
 	int i, ret;
 	struct sc16is7xx_port *s;
@@ -1084,6 +1128,16 @@ static int sc16is7xx_probe(struct device *dev,
 		goto out_clk;
 	}
 
+	init_kthread_worker(&s->kworker);
+	init_kthread_work(&s->irq_work, sc16is7xx_ist);
+	s->kworker_task = kthread_run(kthread_worker_fn, &s->kworker,
+				      "sc16is7xx");
+	if (IS_ERR(s->kworker_task)) {
+		ret = PTR_ERR(s->kworker_task);
+		goto out_uart;
+	}
+	sched_setscheduler(s->kworker_task, SCHED_FIFO, &sched_param);
+
 #ifdef CONFIG_GPIOLIB
 	if (devtype->nr_gpio) {
 		/* Setup GPIO cotroller */
@@ -1099,12 +1153,10 @@ static int sc16is7xx_probe(struct device *dev,
 		s->gpio.can_sleep	 = 1;
 		ret = gpiochip_add(&s->gpio);
 		if (ret)
-			goto out_uart;
+			goto out_thread;
 	}
 #endif
 
-	mutex_init(&s->mutex);
-
 	for (i = 0; i < devtype->nr_uart; ++i) {
 		/* Initialize port data */
 		s->p[i].port.line	= i;
@@ -1123,10 +1175,9 @@ static int sc16is7xx_probe(struct device *dev,
 		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG,
 				     SC16IS7XX_EFCR_RXDISABLE_BIT |
 				     SC16IS7XX_EFCR_TXDISABLE_BIT);
-		/* Initialize queue for start TX */
-		INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc);
-		/* Initialize queue for changing mode */
-		INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc);
+		/* Initialize kthread work structs */
+		init_kthread_work(&s->p[i].tx_work, sc16is7xx_tx_proc);
+		init_kthread_work(&s->p[i].reg_work, sc16is7xx_reg_proc);
 		/* Register port */
 		uart_add_one_port(&s->uart, &s->p[i].port);
 		/* Go to suspend mode */
@@ -1134,22 +1185,23 @@ static int sc16is7xx_probe(struct device *dev,
 	}
 
 	/* Setup interrupt */
-	ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist,
-					IRQF_ONESHOT | flags, dev_name(dev), s);
+	ret = devm_request_irq(dev, irq, sc16is7xx_irq,
+			       IRQF_ONESHOT | flags, dev_name(dev), s);
 	if (!ret)
 		return 0;
 
 	for (i = 0; i < s->uart.nr; i++)
 		uart_remove_one_port(&s->uart, &s->p[i].port);
 
-	mutex_destroy(&s->mutex);
-
 #ifdef CONFIG_GPIOLIB
 	if (devtype->nr_gpio)
 		gpiochip_remove(&s->gpio);
 
-out_uart:
+out_thread:
 #endif
+	kthread_stop(s->kworker_task);
+
+out_uart:
 	uart_unregister_driver(&s->uart);
 
 out_clk:
@@ -1170,13 +1222,13 @@ static int sc16is7xx_remove(struct device *dev)
 #endif
 
 	for (i = 0; i < s->uart.nr; i++) {
-		cancel_work_sync(&s->p[i].tx_work);
-		cancel_work_sync(&s->p[i].md_work);
 		uart_remove_one_port(&s->uart, &s->p[i].port);
 		sc16is7xx_power(&s->p[i].port, 0);
 	}
 
-	mutex_destroy(&s->mutex);
+	flush_kthread_worker(&s->kworker);
+	kthread_stop(s->kworker_task);
+
 	uart_unregister_driver(&s->uart);
 	if (!IS_ERR(s->clk))
 		clk_disable_unprepare(s->clk);
@@ -1204,6 +1256,75 @@ static struct regmap_config regcfg = {
 	.precious_reg = sc16is7xx_regmap_precious,
 };
 
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
+static int sc16is7xx_spi_probe(struct spi_device *spi)
+{
+	struct sc16is7xx_devtype *devtype;
+	unsigned long flags = 0;
+	struct regmap *regmap;
+	int ret;
+
+	/* Setup SPI bus */
+	spi->bits_per_word	= 8;
+	/* only supports mode 0 on SC16IS762 */
+	spi->mode		= spi->mode ? : SPI_MODE_0;
+	spi->max_speed_hz	= spi->max_speed_hz ? : 15000000;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
+	if (spi->dev.of_node) {
+		const struct of_device_id *of_id =
+			of_match_device(sc16is7xx_dt_ids, &spi->dev);
+
+		devtype = (struct sc16is7xx_devtype *)of_id->data;
+	} else {
+		const struct spi_device_id *id_entry = spi_get_device_id(spi);
+
+		devtype = (struct sc16is7xx_devtype *)id_entry->driver_data;
+		flags = IRQF_TRIGGER_FALLING;
+	}
+
+	regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) |
+			      (devtype->nr_uart - 1);
+	regmap = devm_regmap_init_spi(spi, &regcfg);
+
+	return sc16is7xx_probe(&spi->dev, devtype, regmap, spi->irq, flags);
+}
+
+static int sc16is7xx_spi_remove(struct spi_device *spi)
+{
+	return sc16is7xx_remove(&spi->dev);
+}
+
+static const struct spi_device_id sc16is7xx_spi_id_table[] = {
+	{ "sc16is74x",	(kernel_ulong_t)&sc16is74x_devtype, },
+	{ "sc16is740",	(kernel_ulong_t)&sc16is74x_devtype, },
+	{ "sc16is741",	(kernel_ulong_t)&sc16is74x_devtype, },
+	{ "sc16is750",	(kernel_ulong_t)&sc16is750_devtype, },
+	{ "sc16is752",	(kernel_ulong_t)&sc16is752_devtype, },
+	{ "sc16is760",	(kernel_ulong_t)&sc16is760_devtype, },
+	{ "sc16is762",	(kernel_ulong_t)&sc16is762_devtype, },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);
+
+static struct spi_driver sc16is7xx_spi_uart_driver = {
+	.driver = {
+		.name		= SC16IS7XX_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(sc16is7xx_dt_ids),
+	},
+	.probe		= sc16is7xx_spi_probe,
+	.remove		= sc16is7xx_spi_remove,
+	.id_table	= sc16is7xx_spi_id_table,
+};
+
+MODULE_ALIAS("spi:sc16is7xx");
+#endif
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
 static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
 			       const struct i2c_device_id *id)
 {
@@ -1235,6 +1356,8 @@ static int sc16is7xx_i2c_remove(struct i2c_client *client)
 
 static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
 	{ "sc16is74x",	(kernel_ulong_t)&sc16is74x_devtype, },
+	{ "sc16is740",	(kernel_ulong_t)&sc16is74x_devtype, },
+	{ "sc16is741",	(kernel_ulong_t)&sc16is74x_devtype, },
 	{ "sc16is750",	(kernel_ulong_t)&sc16is750_devtype, },
 	{ "sc16is752",	(kernel_ulong_t)&sc16is752_devtype, },
 	{ "sc16is760",	(kernel_ulong_t)&sc16is760_devtype, },
@@ -1253,8 +1376,43 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = {
 	.remove		= sc16is7xx_i2c_remove,
 	.id_table	= sc16is7xx_i2c_id_table,
 };
-module_i2c_driver(sc16is7xx_i2c_uart_driver);
+
 MODULE_ALIAS("i2c:sc16is7xx");
+#endif
+
+static int __init sc16is7xx_init(void)
+{
+	int ret = 0;
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+	ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
+	if (ret < 0) {
+		pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
+		return ret;
+	}
+#endif
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
+	ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
+	if (ret < 0) {
+		pr_err("failed to init sc16is7xx spi --> %d\n", ret);
+		return ret;
+	}
+#endif
+	return ret;
+}
+module_init(sc16is7xx_init);
+
+static void __exit sc16is7xx_exit(void)
+{
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+	i2c_del_driver(&sc16is7xx_i2c_uart_driver);
+#endif
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
+	spi_unregister_driver(&sc16is7xx_spi_uart_driver);
+#endif
+}
+module_exit(sc16is7xx_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>");
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 1d5ea39..cf0133a 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -131,8 +131,8 @@ struct tegra_uart_port {
 	struct dma_async_tx_descriptor		*rx_dma_desc;
 	dma_cookie_t				tx_cookie;
 	dma_cookie_t				rx_cookie;
-	int					tx_bytes_requested;
-	int					rx_bytes_requested;
+	unsigned int				tx_bytes_requested;
+	unsigned int				rx_bytes_requested;
 };
 
 static void tegra_uart_start_next_tx(struct tegra_uart_port *tup);
@@ -234,6 +234,22 @@ static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
 	tup->lcr_shadow = lcr;
 }
 
+/**
+ * tegra_uart_wait_cycle_time: Wait for N UART clock periods
+ *
+ * @tup:	Tegra serial port data structure.
+ * @cycles:	Number of clock periods to wait.
+ *
+ * Tegra UARTs are clocked at 16X the baud/bit rate and hence the UART
+ * clock speed is 16X the current baud rate.
+ */
+static void tegra_uart_wait_cycle_time(struct tegra_uart_port *tup,
+				       unsigned int cycles)
+{
+	if (tup->current_baud)
+		udelay(DIV_ROUND_UP(cycles * 1000000, tup->current_baud * 16));
+}
+
 /* Wait for a symbol-time. */
 static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup,
 		unsigned int syms)
@@ -263,8 +279,12 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
 	/* Dummy read to ensure the write is posted */
 	tegra_uart_read(tup, UART_SCR);
 
-	/* Wait for the flush to propagate. */
-	tegra_uart_wait_sym_time(tup, 1);
+	/*
+	 * For all tegra devices (up to t210), there is a hardware issue that
+	 * requires software to wait for 32 UART clock periods for the flush
+	 * to propagate, otherwise data could be lost.
+	 */
+	tegra_uart_wait_cycle_time(tup, 32);
 }
 
 static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud)
@@ -388,9 +408,9 @@ static void tegra_uart_tx_dma_complete(void *args)
 	struct circ_buf *xmit = &tup->uport.state->xmit;
 	struct dma_tx_state state;
 	unsigned long flags;
-	int count;
+	unsigned int count;
 
-	dmaengine_tx_status(tup->tx_dma_chan, tup->rx_cookie, &state);
+	dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
 	count = tup->tx_bytes_requested - state.residue;
 	async_tx_ack(tup->tx_dma_desc);
 	spin_lock_irqsave(&tup->uport.lock, flags);
@@ -480,7 +500,7 @@ static void tegra_uart_stop_tx(struct uart_port *u)
 	struct tegra_uart_port *tup = to_tegra_uport(u);
 	struct circ_buf *xmit = &tup->uport.state->xmit;
 	struct dma_tx_state state;
-	int count;
+	unsigned int count;
 
 	if (tup->tx_in_progress != TEGRA_UART_TX_DMA)
 		return;
@@ -530,10 +550,15 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
 }
 
 static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
-		struct tty_port *tty, int count)
+				      struct tty_port *tty,
+				      unsigned int count)
 {
 	int copied;
 
+	/* If count is zero, then there is no data to be copied */
+	if (!count)
+		return;
+
 	tup->uport.icount.rx += count;
 	if (!tty) {
 		dev_err(tup->uport.dev, "No tty port\n");
@@ -555,21 +580,30 @@ static void tegra_uart_rx_dma_complete(void *args)
 {
 	struct tegra_uart_port *tup = args;
 	struct uart_port *u = &tup->uport;
-	int count = tup->rx_bytes_requested;
+	unsigned int count = tup->rx_bytes_requested;
 	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
 	struct tty_port *port = &u->state->port;
 	unsigned long flags;
+	struct dma_tx_state state;
+	enum dma_status status;
 
-	async_tx_ack(tup->rx_dma_desc);
 	spin_lock_irqsave(&u->lock, flags);
 
+	status = dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+
+	if (status == DMA_IN_PROGRESS) {
+		dev_dbg(tup->uport.dev, "RX DMA is in progress\n");
+		goto done;
+	}
+
+	async_tx_ack(tup->rx_dma_desc);
+
 	/* Deactivate flow control to stop sender */
 	if (tup->rts_active)
 		set_rts(tup, false);
 
 	/* If we are here, DMA is stopped */
-	if (count)
-		tegra_uart_copy_rx_to_tty(tup, port, count);
+	tegra_uart_copy_rx_to_tty(tup, port, count);
 
 	tegra_uart_handle_rx_pio(tup, port);
 	if (tty) {
@@ -584,6 +618,7 @@ static void tegra_uart_rx_dma_complete(void *args)
 	if (tup->rts_active)
 		set_rts(tup, true);
 
+done:
 	spin_unlock_irqrestore(&u->lock, flags);
 }
 
@@ -594,7 +629,7 @@ static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup,
 	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
 	struct tty_port *port = &tup->uport.state->port;
 	struct uart_port *u = &tup->uport;
-	int count;
+	unsigned int count;
 
 	/* Deactivate flow control to stop sender */
 	if (tup->rts_active)
@@ -606,8 +641,7 @@ static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup,
 	count = tup->rx_bytes_requested - state.residue;
 
 	/* If we are here, DMA is stopped */
-	if (count)
-		tegra_uart_copy_rx_to_tty(tup, port, count);
+	tegra_uart_copy_rx_to_tty(tup, port, count);
 
 	tegra_uart_handle_rx_pio(tup, port);
 	if (tty) {
@@ -865,6 +899,16 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B;
 	tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
 
+	/* Dummy read to ensure the write is posted */
+	tegra_uart_read(tup, UART_SCR);
+
+	/*
+	 * For all tegra devices (up to t210), there is a hardware issue that
+	 * requires software to wait for 3 UART clock periods after enabling
+	 * the TX fifo, otherwise data could be lost.
+	 */
+	tegra_uart_wait_cycle_time(tup, 3);
+
 	/*
 	 * Initialize the UART with default configuration
 	 * (115200, N, 8, 1) so that the receive DMA buffer may be
@@ -905,6 +949,28 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	return 0;
 }
 
+static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
+		bool dma_to_memory)
+{
+	if (dma_to_memory) {
+		dmaengine_terminate_all(tup->rx_dma_chan);
+		dma_release_channel(tup->rx_dma_chan);
+		dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
+				tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
+		tup->rx_dma_chan = NULL;
+		tup->rx_dma_buf_phys = 0;
+		tup->rx_dma_buf_virt = NULL;
+	} else {
+		dmaengine_terminate_all(tup->tx_dma_chan);
+		dma_release_channel(tup->tx_dma_chan);
+		dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
+			UART_XMIT_SIZE, DMA_TO_DEVICE);
+		tup->tx_dma_chan = NULL;
+		tup->tx_dma_buf_phys = 0;
+		tup->tx_dma_buf_virt = NULL;
+	}
+}
+
 static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 			bool dma_to_memory)
 {
@@ -933,67 +999,39 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 			dma_release_channel(dma_chan);
 			return -ENOMEM;
 		}
+		dma_sconfig.src_addr = tup->uport.mapbase;
+		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		dma_sconfig.src_maxburst = 4;
+		tup->rx_dma_chan = dma_chan;
+		tup->rx_dma_buf_virt = dma_buf;
+		tup->rx_dma_buf_phys = dma_phys;
 	} else {
 		dma_phys = dma_map_single(tup->uport.dev,
 			tup->uport.state->xmit.buf, UART_XMIT_SIZE,
 			DMA_TO_DEVICE);
+		if (dma_mapping_error(tup->uport.dev, dma_phys)) {
+			dev_err(tup->uport.dev, "dma_map_single tx failed\n");
+			dma_release_channel(dma_chan);
+			return -ENOMEM;
+		}
 		dma_buf = tup->uport.state->xmit.buf;
-	}
-
-	if (dma_to_memory) {
-		dma_sconfig.src_addr = tup->uport.mapbase;
-		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-		dma_sconfig.src_maxburst = 4;
-	} else {
 		dma_sconfig.dst_addr = tup->uport.mapbase;
 		dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 		dma_sconfig.dst_maxburst = 16;
+		tup->tx_dma_chan = dma_chan;
+		tup->tx_dma_buf_virt = dma_buf;
+		tup->tx_dma_buf_phys = dma_phys;
 	}
 
 	ret = dmaengine_slave_config(dma_chan, &dma_sconfig);
 	if (ret < 0) {
 		dev_err(tup->uport.dev,
 			"Dma slave config failed, err = %d\n", ret);
-		goto scrub;
+		tegra_uart_dma_channel_free(tup, dma_to_memory);
+		return ret;
 	}
 
-	if (dma_to_memory) {
-		tup->rx_dma_chan = dma_chan;
-		tup->rx_dma_buf_virt = dma_buf;
-		tup->rx_dma_buf_phys = dma_phys;
-	} else {
-		tup->tx_dma_chan = dma_chan;
-		tup->tx_dma_buf_virt = dma_buf;
-		tup->tx_dma_buf_phys = dma_phys;
-	}
 	return 0;
-
-scrub:
-	dma_release_channel(dma_chan);
-	return ret;
-}
-
-static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
-		bool dma_to_memory)
-{
-	struct dma_chan *dma_chan;
-
-	if (dma_to_memory) {
-		dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
-				tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
-		dma_chan = tup->rx_dma_chan;
-		tup->rx_dma_chan = NULL;
-		tup->rx_dma_buf_phys = 0;
-		tup->rx_dma_buf_virt = NULL;
-	} else {
-		dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
-			UART_XMIT_SIZE, DMA_TO_DEVICE);
-		dma_chan = tup->tx_dma_chan;
-		tup->tx_dma_chan = NULL;
-		tup->tx_dma_buf_phys = 0;
-		tup->tx_dma_buf_virt = NULL;
-	}
-	dma_release_channel(dma_chan);
 }
 
 static int tegra_uart_startup(struct uart_port *u)
@@ -1060,8 +1098,6 @@ static void tegra_uart_shutdown(struct uart_port *u)
 	tegra_uart_dma_channel_free(tup, true);
 	tegra_uart_dma_channel_free(tup, false);
 	free_irq(u->irq, tup);
-
-	tegra_uart_flush_buffer(u);
 }
 
 static void tegra_uart_enable_ms(struct uart_port *u)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0b7bb12..7ae1592 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -335,18 +335,29 @@ unsigned int
 uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 		   struct ktermios *old, unsigned int min, unsigned int max)
 {
-	unsigned int try, baud, altbaud = 38400;
+	unsigned int try;
+	unsigned int baud;
+	unsigned int altbaud;
 	int hung_up = 0;
 	upf_t flags = port->flags & UPF_SPD_MASK;
 
-	if (flags == UPF_SPD_HI)
+	switch (flags) {
+	case UPF_SPD_HI:
 		altbaud = 57600;
-	else if (flags == UPF_SPD_VHI)
+		break;
+	case UPF_SPD_VHI:
 		altbaud = 115200;
-	else if (flags == UPF_SPD_SHI)
+		break;
+	case UPF_SPD_SHI:
 		altbaud = 230400;
-	else if (flags == UPF_SPD_WARP)
+		break;
+	case UPF_SPD_WARP:
 		altbaud = 460800;
+		break;
+	default:
+		altbaud = 38400;
+		break;
+	}
 
 	for (try = 0; try < 2; try++) {
 		baud = tty_termios_baud_rate(termios);
@@ -894,12 +905,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 			 * need to rate-limit; it's CAP_SYS_ADMIN only.
 			 */
 			if (uport->flags & UPF_SPD_MASK) {
-				char buf[64];
-
 				dev_notice(uport->dev,
 				       "%s sets custom speed on %s. This is deprecated.\n",
 				      current->comm,
-				      tty_name(port->tty, buf));
+				      tty_name(port->tty));
 			}
 			uart_change_speed(tty, state, NULL);
 		}
@@ -1816,8 +1825,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co)
  *	@options: ptr for <options> field; NULL if not present (out)
  *
  *	Decodes earlycon kernel command line parameters of the form
- *	   earlycon=<name>,io|mmio|mmio32,<addr>,<options>
- *	   console=<name>,io|mmio|mmio32,<addr>,<options>
+ *	   earlycon=<name>,io|mmio|mmio32|mmio32be,<addr>,<options>
+ *	   console=<name>,io|mmio|mmio32|mmio32be,<addr>,<options>
  *
  *	The optional form
  *	   earlycon=<name>,0x<addr>,<options>
@@ -1835,6 +1844,9 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
 	} else if (strncmp(p, "mmio32,", 7) == 0) {
 		*iotype = UPIO_MEM32;
 		p += 7;
+	} else if (strncmp(p, "mmio32be,", 9) == 0) {
+		*iotype = UPIO_MEM32BE;
+		p += 9;
 	} else if (strncmp(p, "io,", 3) == 0) {
 		*iotype = UPIO_PORT;
 		p += 3;
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index 5c79bda..b4decf8 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -328,7 +328,7 @@ static int ks8695uart_startup(struct uart_port *port)
 {
 	int retval;
 
-	set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
+	irq_modify_status(KS8695_IRQ_UART_TX, IRQ_NOREQUEST, IRQ_NOAUTOEN);
 	tx_enable(port, 0);
 	rx_enable(port, 1);
 	ms_enable(port, 1);
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index d7b846d..402f7fb 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -49,8 +49,7 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
 	unsigned int count = 0;
 
 	for (i = 0; i < UART_GPIO_MAX; i++)
-		if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
-		    mctrl_gpios_desc[i].dir_out) {
+		if (gpios->gpio[i] && mctrl_gpios_desc[i].dir_out) {
 			desc_array[count] = gpios->gpio[i];
 			value_array[count] = !!(mctrl & mctrl_gpios_desc[i].mctrl);
 			count++;
@@ -118,7 +117,7 @@ void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
 	enum mctrl_gpio_idx i;
 
 	for (i = 0; i < UART_GPIO_MAX; i++)
-		if (!IS_ERR_OR_NULL(gpios->gpio[i]))
+		if (gpios->gpio[i])
 			devm_gpiod_put(dev, gpios->gpio[i]);
 	devm_kfree(dev, gpios);
 }
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 95772cf..1b2f894 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -81,7 +81,8 @@ struct sci_port {
 
 	/* Platform configuration */
 	struct plat_sci_port	*cfg;
-	int			overrun_bit;
+	unsigned int		overrun_reg;
+	unsigned int		overrun_mask;
 	unsigned int		error_mask;
 	unsigned int		sampling_rate;
 	resource_size_t		reg_size;
@@ -168,6 +169,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -188,6 +191,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -207,6 +212,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= { 0x30, 16 },
+		[SCPDR]		= { 0x34, 16 },
 	},
 
 	/*
@@ -226,6 +233,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= { 0x30, 16 },
+		[SCPDR]		= { 0x34, 16 },
 	},
 
 	/*
@@ -246,6 +255,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -265,6 +276,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -284,6 +297,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -303,6 +318,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= { 0x40, 16 },
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -323,6 +340,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -343,6 +362,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x24, 16 },
 		[SCLSR]		= { 0x28, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -363,6 +384,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 };
 
@@ -781,7 +804,7 @@ static int sci_handle_errors(struct uart_port *port)
 	struct sci_port *s = to_sci_port(port);
 
 	/* Handle overruns */
-	if (status & (1 << s->overrun_bit)) {
+	if (status & s->overrun_mask) {
 		port->icount.overrun++;
 
 		/* overrun error */
@@ -844,32 +867,17 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 	struct tty_port *tport = &port->state->port;
 	struct sci_port *s = to_sci_port(port);
 	struct plat_sci_reg *reg;
-	int copied = 0, offset;
-	u16 status, bit;
-
-	switch (port->type) {
-	case PORT_SCIF:
-	case PORT_HSCIF:
-		offset = SCLSR;
-		break;
-	case PORT_SCIFA:
-	case PORT_SCIFB:
-		offset = SCxSR;
-		break;
-	default:
-		return 0;
-	}
+	int copied = 0;
+	u16 status;
 
-	reg = sci_getreg(port, offset);
+	reg = sci_getreg(port, s->overrun_reg);
 	if (!reg->size)
 		return 0;
 
-	status = serial_port_in(port, offset);
-	bit = 1 << s->overrun_bit;
-
-	if (status & bit) {
-		status &= ~bit;
-		serial_port_out(port, offset, status);
+	status = serial_port_in(port, s->overrun_reg);
+	if (status & s->overrun_mask) {
+		status &= ~s->overrun_mask;
+		serial_port_out(port, s->overrun_reg, status);
 
 		port->icount.overrun++;
 
@@ -1021,15 +1029,11 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 
 	ssr_status = serial_port_in(port, SCxSR);
 	scr_status = serial_port_in(port, SCSCR);
-	switch (port->type) {
-	case PORT_SCIF:
-	case PORT_HSCIF:
-		orer_status = serial_port_in(port, SCLSR);
-		break;
-	case PORT_SCIFA:
-	case PORT_SCIFB:
+	if (s->overrun_reg == SCxSR)
 		orer_status = ssr_status;
-		break;
+	else {
+		if (sci_getreg(port, s->overrun_reg)->size)
+			orer_status = serial_port_in(port, s->overrun_reg);
 	}
 
 	err_enabled = scr_status & port_rx_irq_mask(port);
@@ -1059,7 +1063,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 		ret = sci_br_interrupt(irq, ptr);
 
 	/* Overrun Interrupt */
-	if (orer_status & (1 << s->overrun_bit))
+	if (orer_status & s->overrun_mask)
 		sci_handle_fifo_overrun(port);
 
 	return ret;
@@ -2226,32 +2230,38 @@ static int sci_init_single(struct platform_device *dev,
 	switch (p->type) {
 	case PORT_SCIFB:
 		port->fifosize = 256;
-		sci_port->overrun_bit = 9;
+		sci_port->overrun_reg = SCxSR;
+		sci_port->overrun_mask = SCIFA_ORER;
 		sampling_rate = 16;
 		break;
 	case PORT_HSCIF:
 		port->fifosize = 128;
 		sampling_rate = 0;
-		sci_port->overrun_bit = 0;
+		sci_port->overrun_reg = SCLSR;
+		sci_port->overrun_mask = SCLSR_ORER;
 		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
-		sci_port->overrun_bit = 9;
+		sci_port->overrun_reg = SCxSR;
+		sci_port->overrun_mask = SCIFA_ORER;
 		sampling_rate = 16;
 		break;
 	case PORT_SCIF:
 		port->fifosize = 16;
 		if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
-			sci_port->overrun_bit = 9;
+			sci_port->overrun_reg = SCxSR;
+			sci_port->overrun_mask = SCIFA_ORER;
 			sampling_rate = 16;
 		} else {
-			sci_port->overrun_bit = 0;
+			sci_port->overrun_reg = SCLSR;
+			sci_port->overrun_mask = SCLSR_ORER;
 			sampling_rate = 32;
 		}
 		break;
 	default:
 		port->fifosize = 1;
-		sci_port->overrun_bit = 5;
+		sci_port->overrun_reg = SCxSR;
+		sci_port->overrun_mask = SCI_ORER;
 		sampling_rate = 32;
 		break;
 	}
@@ -2297,15 +2307,11 @@ static int sci_init_single(struct platform_device *dev,
 			SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
 
 	/*
-	 * Establish sensible defaults for the overrun detection, unless
-	 * the part has explicitly disabled support for it.
-	 */
-
-	/*
 	 * Make the error mask inclusive of overrun detection, if
 	 * supported.
 	 */
-	sci_port->error_mask |= 1 << sci_port->overrun_bit;
+	if (sci_port->overrun_reg == SCxSR)
+		sci_port->error_mask |= sci_port->overrun_mask;
 
 	port->type		= p->type;
 	port->flags		= UPF_FIXED_PORT | p->flags;
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index d5db81a..3393f67 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -1,7 +1,115 @@
+#include <linux/bitops.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#define SCI_MAJOR		204
+#define SCI_MINOR_START		8
+
+
+/*
+ * SCI register subset common for all port types.
+ * Not all registers will exist on all parts.
+ */
+enum {
+	SCSMR,				/* Serial Mode Register */
+	SCBRR,				/* Bit Rate Register */
+	SCSCR,				/* Serial Control Register */
+	SCxSR,				/* Serial Status Register */
+	SCFCR,				/* FIFO Control Register */
+	SCFDR,				/* FIFO Data Count Register */
+	SCxTDR,				/* Transmit (FIFO) Data Register */
+	SCxRDR,				/* Receive (FIFO) Data Register */
+	SCLSR,				/* Line Status Register */
+	SCTFDR,				/* Transmit FIFO Data Count Register */
+	SCRFDR,				/* Receive FIFO Data Count Register */
+	SCSPTR,				/* Serial Port Register */
+	HSSRR,				/* Sampling Rate Register */
+	SCPCR,				/* Serial Port Control Register */
+	SCPDR,				/* Serial Port Data Register */
+
+	SCIx_NR_REGS,
+};
+
+
+/* SCSMR (Serial Mode Register) */
+#define SCSMR_CHR	BIT(6)	/* 7-bit Character Length */
+#define SCSMR_PE	BIT(5)	/* Parity Enable */
+#define SCSMR_ODD	BIT(4)	/* Odd Parity */
+#define SCSMR_STOP	BIT(3)	/* Stop Bit Length */
+#define SCSMR_CKS	0x0003	/* Clock Select */
+
+/* Serial Control Register, SCIFA/SCIFB only bits */
+#define SCSCR_TDRQE	BIT(15)	/* Tx Data Transfer Request Enable */
+#define SCSCR_RDRQE	BIT(14)	/* Rx Data Transfer Request Enable */
+
+/* SCxSR (Serial Status Register) on SCI */
+#define SCI_TDRE	BIT(7)	/* Transmit Data Register Empty */
+#define SCI_RDRF	BIT(6)	/* Receive Data Register Full */
+#define SCI_ORER	BIT(5)	/* Overrun Error */
+#define SCI_FER		BIT(4)	/* Framing Error */
+#define SCI_PER		BIT(3)	/* Parity Error */
+#define SCI_TEND	BIT(2)	/* Transmit End */
+#define SCI_RESERVED	0x03	/* All reserved bits */
+
+#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
+
+#define SCI_RDxF_CLEAR	~(SCI_RESERVED | SCI_RDRF)
+#define SCI_ERROR_CLEAR	~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)
+#define SCI_TDxE_CLEAR	~(SCI_RESERVED | SCI_TEND | SCI_TDRE)
+#define SCI_BREAK_CLEAR	~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)
+
+/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */
+#define SCIF_ER		BIT(7)	/* Receive Error */
+#define SCIF_TEND	BIT(6)	/* Transmission End */
+#define SCIF_TDFE	BIT(5)	/* Transmit FIFO Data Empty */
+#define SCIF_BRK	BIT(4)	/* Break Detect */
+#define SCIF_FER	BIT(3)	/* Framing Error */
+#define SCIF_PER	BIT(2)	/* Parity Error */
+#define SCIF_RDF	BIT(1)	/* Receive FIFO Data Full */
+#define SCIF_DR		BIT(0)	/* Receive Data Ready */
+/* SCIF only (optional) */
+#define SCIF_PERC	0xf000	/* Number of Parity Errors */
+#define SCIF_FERC	0x0f00	/* Number of Framing Errors */
+/*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */
+#define SCIFA_ORER	BIT(9)	/* Overrun Error */
+
+#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
+
+#define SCIF_RDxF_CLEAR		~(SCIF_DR | SCIF_RDF)
+#define SCIF_ERROR_CLEAR	~(SCIFA_ORER | SCIF_PER | SCIF_FER | SCIF_ER)
+#define SCIF_TDxE_CLEAR		~(SCIF_TDFE)
+#define SCIF_BREAK_CLEAR	~(SCIF_PER | SCIF_FER | SCIF_BRK)
+
+/* SCFCR (FIFO Control Register) */
+#define SCFCR_MCE	BIT(3)	/* Modem Control Enable */
+#define SCFCR_TFRST	BIT(2)	/* Transmit FIFO Data Register Reset */
+#define SCFCR_RFRST	BIT(1)	/* Receive FIFO Data Register Reset */
+#define SCFCR_LOOP	BIT(0)	/* Loopback Test */
+
+/* SCLSR (Line Status Register) on (H)SCIF */
+#define SCLSR_ORER	BIT(0)	/* Overrun Error */
+
+/* SCSPTR (Serial Port Register), optional */
+#define SCSPTR_RTSIO	BIT(7)	/* Serial Port RTS Pin Input/Output */
+#define SCSPTR_RTSDT	BIT(6)	/* Serial Port RTS Pin Data */
+#define SCSPTR_CTSIO	BIT(5)	/* Serial Port CTS Pin Input/Output */
+#define SCSPTR_CTSDT	BIT(4)	/* Serial Port CTS Pin Data */
+#define SCSPTR_SPB2IO	BIT(1)	/* Serial Port Break Input/Output */
+#define SCSPTR_SPB2DT	BIT(0)	/* Serial Port Break Data */
+
+/* HSSRR HSCIF */
+#define HSCIF_SRE	BIT(15)	/* Sampling Rate Register Enable */
+
+/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
+#define SCPCR_RTSC	BIT(4)	/* Serial Port RTS Pin / Output Pin */
+#define SCPCR_CTSC	BIT(3)	/* Serial Port CTS Pin / Input Pin */
+
+/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
+#define SCPDR_RTSD	BIT(4)	/* Serial Port RTS Output Pin Data */
+#define SCPDR_CTSD	BIT(3)	/* Serial Port CTS Input Pin Data */
+
+
 #define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
 #define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
 #define SCxSR_TDxE(port)	(((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
@@ -15,24 +123,24 @@
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
     defined(CONFIG_ARCH_SH73A0) || \
-    defined(CONFIG_ARCH_SH7372) || \
     defined(CONFIG_ARCH_R8A7740)
 
-# define SCxSR_RDxF_CLEAR(port)	 (serial_port_in(port, SCxSR) & 0xfffc)
-# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73)
-# define SCxSR_TDxE_CLEAR(port)	 (serial_port_in(port, SCxSR) & 0xffdf)
-# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3)
+# define SCxSR_RDxF_CLEAR(port) \
+	(serial_port_in(port, SCxSR) & SCIF_RDxF_CLEAR)
+# define SCxSR_ERROR_CLEAR(port) \
+	(serial_port_in(port, SCxSR) & SCIF_ERROR_CLEAR)
+# define SCxSR_TDxE_CLEAR(port) \
+	(serial_port_in(port, SCxSR) & SCIF_TDxE_CLEAR)
+# define SCxSR_BREAK_CLEAR(port) \
+	(serial_port_in(port, SCxSR) & SCIF_BREAK_CLEAR)
 #else
-# define SCxSR_RDxF_CLEAR(port)	 (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
-# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
-# define SCxSR_TDxE_CLEAR(port)  (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
-# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
+# define SCxSR_RDxF_CLEAR(port) \
+	((((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) & 0xff)
+# define SCxSR_ERROR_CLEAR(port) \
+	((((port)->type == PORT_SCI) ? SCI_ERROR_CLEAR : SCIF_ERROR_CLEAR) & 0xff)
+# define SCxSR_TDxE_CLEAR(port) \
+	((((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) & 0xff)
+# define SCxSR_BREAK_CLEAR(port) \
+	((((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) & 0xff)
 #endif
 
-/* SCFCR */
-#define SCFCR_RFRST 0x0002
-#define SCFCR_TFRST 0x0004
-#define SCFCR_MCE   0x0008
-
-#define SCI_MAJOR		204
-#define SCI_MINOR_START		8
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 9de3eab..653cdd5 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -36,8 +36,6 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count);
 static struct uart_driver sirfsoc_uart_drv;
 
 static void sirfsoc_uart_tx_dma_complete_callback(void *param);
-static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port);
-static void sirfsoc_uart_rx_dma_complete_callback(void *param);
 static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
 	{4000000, 2359296},
 	{3500000, 1310721},
@@ -59,50 +57,7 @@ static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
 	{9600, 1114979},
 };
 
-static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = {
-	[0] = {
-		.port = {
-			.iotype		= UPIO_MEM,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		},
-	},
-	[1] = {
-		.port = {
-			.iotype		= UPIO_MEM,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		},
-	},
-	[2] = {
-		.port = {
-			.iotype		= UPIO_MEM,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 2,
-		},
-	},
-	[3] = {
-		.port = {
-			.iotype		= UPIO_MEM,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 3,
-		},
-	},
-	[4] = {
-		.port = {
-			.iotype		= UPIO_MEM,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 4,
-		},
-	},
-	[5] = {
-		.port = {
-			.iotype		= UPIO_MEM,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 5,
-		},
-	},
-};
+static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR];
 
 static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
 {
@@ -116,8 +71,7 @@ static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port)
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
 	reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status);
-
-	return (reg & ufifo_st->ff_empty(port->line)) ? TIOCSER_TEMT : 0;
+	return (reg & ufifo_st->ff_empty(port)) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port)
@@ -152,6 +106,26 @@ static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0;
 	unsigned int current_val;
 
+	if (mctrl & TIOCM_LOOP) {
+		if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
+			wr_regl(port, ureg->sirfsoc_line_ctrl,
+				rd_regl(port, ureg->sirfsoc_line_ctrl) |
+				SIRFUART_LOOP_BACK);
+		else
+			wr_regl(port, ureg->sirfsoc_mode1,
+				rd_regl(port, ureg->sirfsoc_mode1) |
+				SIRFSOC_USP_LOOP_BACK_CTRL);
+	} else {
+		if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
+			wr_regl(port, ureg->sirfsoc_line_ctrl,
+				rd_regl(port, ureg->sirfsoc_line_ctrl) &
+				~SIRFUART_LOOP_BACK);
+		else
+			wr_regl(port, ureg->sirfsoc_mode1,
+				rd_regl(port, ureg->sirfsoc_mode1) &
+				~SIRFSOC_USP_LOOP_BACK_CTRL);
+	}
+
 	if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
 		return;
 	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
@@ -182,16 +156,19 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port)
 				rd_regl(port, ureg->sirfsoc_int_en_reg) &
 				~uint_en->sirfsoc_txfifo_empty_en);
 			else
-				wr_regl(port, SIRFUART_INT_EN_CLR,
+				wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
 				uint_en->sirfsoc_txfifo_empty_en);
 		}
 	} else {
+		if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
+			wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
+				ureg->sirfsoc_tx_rx_en) & ~SIRFUART_TX_EN);
 		if (!sirfport->is_atlas7)
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
 				rd_regl(port, ureg->sirfsoc_int_en_reg) &
 				~uint_en->sirfsoc_txfifo_empty_en);
 		else
-			wr_regl(port, SIRFUART_INT_EN_CLR,
+			wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
 				uint_en->sirfsoc_txfifo_empty_en);
 	}
 }
@@ -222,7 +199,7 @@ static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport)
 				rd_regl(port, ureg->sirfsoc_int_en_reg)&
 				~(uint_en->sirfsoc_txfifo_empty_en));
 	else
-		wr_regl(port, SIRFUART_INT_EN_CLR,
+		wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
 				uint_en->sirfsoc_txfifo_empty_en);
 	/*
 	 * DMA requires buffer address and buffer length are both aligned with
@@ -290,8 +267,11 @@ static void sirfsoc_uart_start_tx(struct uart_port *port)
 	if (sirfport->tx_dma_chan)
 		sirfsoc_uart_tx_with_dma(sirfport);
 	else {
-		sirfsoc_uart_pio_tx_chars(sirfport,
-			SIRFSOC_UART_IO_TX_REASONABLE_CNT);
+		if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
+			wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
+				ureg->sirfsoc_tx_rx_en) | SIRFUART_TX_EN);
+		wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
+		sirfsoc_uart_pio_tx_chars(sirfport, port->fifosize);
 		wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
 		if (!sirfport->is_atlas7)
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
@@ -314,21 +294,25 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port)
 		if (!sirfport->is_atlas7)
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
 				rd_regl(port, ureg->sirfsoc_int_en_reg) &
-				~(SIRFUART_RX_DMA_INT_EN(port, uint_en) |
+				~(SIRFUART_RX_DMA_INT_EN(uint_en,
+				sirfport->uart_reg->uart_type) |
 				uint_en->sirfsoc_rx_done_en));
 		else
-			wr_regl(port, SIRFUART_INT_EN_CLR,
-					SIRFUART_RX_DMA_INT_EN(port, uint_en)|
-					uint_en->sirfsoc_rx_done_en);
+			wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
+				SIRFUART_RX_DMA_INT_EN(uint_en,
+				sirfport->uart_reg->uart_type)|
+				uint_en->sirfsoc_rx_done_en);
 		dmaengine_terminate_all(sirfport->rx_dma_chan);
 	} else {
 		if (!sirfport->is_atlas7)
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
 				rd_regl(port, ureg->sirfsoc_int_en_reg)&
-				~(SIRFUART_RX_IO_INT_EN(port, uint_en)));
+				~(SIRFUART_RX_IO_INT_EN(uint_en,
+				sirfport->uart_reg->uart_type)));
 		else
-			wr_regl(port, SIRFUART_INT_EN_CLR,
-					SIRFUART_RX_IO_INT_EN(port, uint_en));
+			wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
+				SIRFUART_RX_IO_INT_EN(uint_en,
+				sirfport->uart_reg->uart_type));
 	}
 }
 
@@ -349,7 +333,7 @@ static void sirfsoc_uart_disable_ms(struct uart_port *port)
 					rd_regl(port, ureg->sirfsoc_int_en_reg)&
 					~uint_en->sirfsoc_cts_en);
 		else
-			wr_regl(port, SIRFUART_INT_EN_CLR,
+			wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
 					uint_en->sirfsoc_cts_en);
 	} else
 		disable_irq(gpio_to_irq(sirfport->cts_gpio));
@@ -379,7 +363,8 @@ static void sirfsoc_uart_enable_ms(struct uart_port *port)
 	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 		wr_regl(port, ureg->sirfsoc_afc_ctrl,
 				rd_regl(port, ureg->sirfsoc_afc_ctrl) |
-				SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN);
+				SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN |
+				SIRFUART_AFC_CTRL_RX_THD);
 		if (!sirfport->is_atlas7)
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
 					rd_regl(port, ureg->sirfsoc_int_en_reg)
@@ -417,7 +402,7 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
 	if (!tty)
 		return -ENODEV;
 	while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
-					ufifo_st->ff_empty(port->line))) {
+					ufifo_st->ff_empty(port))) {
 		ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) |
 			SIRFUART_DUMMY_READ;
 		if (unlikely(uart_handle_sysrq_char(port, ch)))
@@ -444,7 +429,7 @@ sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count)
 	unsigned int num_tx = 0;
 	while (!uart_circ_empty(xmit) &&
 		!(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
-					ufifo_st->ff_full(port->line)) &&
+					ufifo_st->ff_full(port)) &&
 		count--) {
 		wr_regl(port, ureg->sirfsoc_tx_fifo_data,
 				xmit->buf[xmit->tail]);
@@ -478,139 +463,6 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param)
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static void sirfsoc_uart_insert_rx_buf_to_tty(
-		struct sirfsoc_uart_port *sirfport, int count)
-{
-	struct uart_port *port = &sirfport->port;
-	struct tty_port *tport = &port->state->port;
-	int inserted;
-
-	inserted = tty_insert_flip_string(tport,
-		sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count);
-	port->icount.rx += inserted;
-}
-
-static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index)
-{
-	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
-
-	sirfport->rx_dma_items[index].xmit.tail =
-		sirfport->rx_dma_items[index].xmit.head = 0;
-	sirfport->rx_dma_items[index].desc =
-		dmaengine_prep_slave_single(sirfport->rx_dma_chan,
-		sirfport->rx_dma_items[index].dma_addr, SIRFSOC_RX_DMA_BUF_SIZE,
-		DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
-	if (!sirfport->rx_dma_items[index].desc) {
-		dev_err(port->dev, "DMA slave single fail\n");
-		return;
-	}
-	sirfport->rx_dma_items[index].desc->callback =
-		sirfsoc_uart_rx_dma_complete_callback;
-	sirfport->rx_dma_items[index].desc->callback_param = sirfport;
-	sirfport->rx_dma_items[index].cookie =
-		dmaengine_submit(sirfport->rx_dma_items[index].desc);
-	dma_async_issue_pending(sirfport->rx_dma_chan);
-}
-
-static void sirfsoc_rx_tmo_process_tl(unsigned long param)
-{
-	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
-	struct uart_port *port = &sirfport->port;
-	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
-	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-	struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
-	unsigned int count;
-	unsigned long flags;
-	struct dma_tx_state tx_state;
-
-	spin_lock_irqsave(&port->lock, flags);
-	while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
-		sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
-		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
-					SIRFSOC_RX_DMA_BUF_SIZE);
-		sirfport->rx_completed++;
-		sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
-	}
-	count = CIRC_CNT(sirfport->rx_dma_items[sirfport->rx_issued].xmit.head,
-		sirfport->rx_dma_items[sirfport->rx_issued].xmit.tail,
-		SIRFSOC_RX_DMA_BUF_SIZE);
-	if (count > 0)
-		sirfsoc_uart_insert_rx_buf_to_tty(sirfport, count);
-	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
-			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
-			SIRFUART_IO_MODE);
-	sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
-	if (sirfport->rx_io_count == 4) {
-		sirfport->rx_io_count = 0;
-		wr_regl(port, ureg->sirfsoc_int_st_reg,
-				uint_st->sirfsoc_rx_done);
-		if (!sirfport->is_atlas7)
-			wr_regl(port, ureg->sirfsoc_int_en_reg,
-				rd_regl(port, ureg->sirfsoc_int_en_reg) &
-				~(uint_en->sirfsoc_rx_done_en));
-		else
-			wr_regl(port, SIRFUART_INT_EN_CLR,
-					uint_en->sirfsoc_rx_done_en);
-		sirfsoc_uart_start_next_rx_dma(port);
-	} else {
-		wr_regl(port, ureg->sirfsoc_int_st_reg,
-				uint_st->sirfsoc_rx_done);
-		if (!sirfport->is_atlas7)
-			wr_regl(port, ureg->sirfsoc_int_en_reg,
-				rd_regl(port, ureg->sirfsoc_int_en_reg) |
-				(uint_en->sirfsoc_rx_done_en));
-		else
-			wr_regl(port, ureg->sirfsoc_int_en_reg,
-					uint_en->sirfsoc_rx_done_en);
-	}
-	spin_unlock_irqrestore(&port->lock, flags);
-	tty_flip_buffer_push(&port->state->port);
-}
-
-static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
-{
-	struct uart_port *port = &sirfport->port;
-	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
-	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-	struct dma_tx_state tx_state;
-	dmaengine_tx_status(sirfport->rx_dma_chan,
-		sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state);
-	dmaengine_terminate_all(sirfport->rx_dma_chan);
-	sirfport->rx_dma_items[sirfport->rx_issued].xmit.head =
-		SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
-	if (!sirfport->is_atlas7)
-		wr_regl(port, ureg->sirfsoc_int_en_reg,
-			rd_regl(port, ureg->sirfsoc_int_en_reg) &
-			~(uint_en->sirfsoc_rx_timeout_en));
-	else
-		wr_regl(port, SIRFUART_INT_EN_CLR,
-				uint_en->sirfsoc_rx_timeout_en);
-	tasklet_schedule(&sirfport->rx_tmo_process_tasklet);
-}
-
-static void sirfsoc_uart_handle_rx_done(struct sirfsoc_uart_port *sirfport)
-{
-	struct uart_port *port = &sirfport->port;
-	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
-	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-	struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
-
-	sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
-	if (sirfport->rx_io_count == 4) {
-		sirfport->rx_io_count = 0;
-		if (!sirfport->is_atlas7)
-			wr_regl(port, ureg->sirfsoc_int_en_reg,
-				rd_regl(port, ureg->sirfsoc_int_en_reg) &
-				~(uint_en->sirfsoc_rx_done_en));
-		else
-			wr_regl(port, SIRFUART_INT_EN_CLR,
-					uint_en->sirfsoc_rx_done_en);
-		wr_regl(port, ureg->sirfsoc_int_st_reg,
-				uint_st->sirfsoc_rx_timeout);
-		sirfsoc_uart_start_next_rx_dma(port);
-	}
-}
-
 static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
 {
 	unsigned long intr_status;
@@ -628,20 +480,25 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
 	intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg);
 	wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status);
 	intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg);
-	if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(port, uint_st)))) {
+	if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(uint_st,
+				sirfport->uart_reg->uart_type)))) {
 		if (intr_status & uint_st->sirfsoc_rxd_brk) {
 			port->icount.brk++;
 			if (uart_handle_break(port))
 				goto recv_char;
 		}
-		if (intr_status & uint_st->sirfsoc_rx_oflow)
+		if (intr_status & uint_st->sirfsoc_rx_oflow) {
 			port->icount.overrun++;
+			flag = TTY_OVERRUN;
+		}
 		if (intr_status & uint_st->sirfsoc_frm_err) {
 			port->icount.frame++;
 			flag = TTY_FRAME;
 		}
-		if (intr_status & uint_st->sirfsoc_parity_err)
+		if (intr_status & uint_st->sirfsoc_parity_err) {
+			port->icount.parity++;
 			flag = TTY_PARITY;
+		}
 		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
 		wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
@@ -662,15 +519,51 @@ recv_char:
 		uart_handle_cts_change(port, cts_status);
 		wake_up_interruptible(&state->port.delta_msr_wait);
 	}
-	if (sirfport->rx_dma_chan) {
-		if (intr_status & uint_st->sirfsoc_rx_timeout)
-			sirfsoc_uart_handle_rx_tmo(sirfport);
-		if (intr_status & uint_st->sirfsoc_rx_done)
-			sirfsoc_uart_handle_rx_done(sirfport);
-	} else {
-		if (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))
-			sirfsoc_uart_pio_rx_chars(port,
-					SIRFSOC_UART_IO_RX_MAX_CNT);
+	if (!sirfport->rx_dma_chan &&
+		(intr_status & SIRFUART_RX_IO_INT_ST(uint_st))) {
+		/*
+		 * chip will trigger continuous RX_TIMEOUT interrupt
+		 * in RXFIFO empty and not trigger if RXFIFO recevice
+		 * data in limit time, original method use RX_TIMEOUT
+		 * will trigger lots of useless interrupt in RXFIFO
+		 * empty.RXFIFO received one byte will trigger RX_DONE
+		 * interrupt.use RX_DONE to wait for data received
+		 * into RXFIFO, use RX_THD/RX_FULL for lots data receive
+		 * and use RX_TIMEOUT for the last left data.
+		 */
+		if (intr_status & uint_st->sirfsoc_rx_done) {
+			if (!sirfport->is_atlas7) {
+				wr_regl(port, ureg->sirfsoc_int_en_reg,
+					rd_regl(port, ureg->sirfsoc_int_en_reg)
+					& ~(uint_en->sirfsoc_rx_done_en));
+				wr_regl(port, ureg->sirfsoc_int_en_reg,
+				rd_regl(port, ureg->sirfsoc_int_en_reg)
+				| (uint_en->sirfsoc_rx_timeout_en));
+			} else {
+				wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
+					uint_en->sirfsoc_rx_done_en);
+				wr_regl(port, ureg->sirfsoc_int_en_reg,
+					uint_en->sirfsoc_rx_timeout_en);
+			}
+		} else {
+			if (intr_status & uint_st->sirfsoc_rx_timeout) {
+				if (!sirfport->is_atlas7) {
+					wr_regl(port, ureg->sirfsoc_int_en_reg,
+					rd_regl(port, ureg->sirfsoc_int_en_reg)
+					& ~(uint_en->sirfsoc_rx_timeout_en));
+					wr_regl(port, ureg->sirfsoc_int_en_reg,
+					rd_regl(port, ureg->sirfsoc_int_en_reg)
+					| (uint_en->sirfsoc_rx_done_en));
+				} else {
+					wr_regl(port,
+						ureg->sirfsoc_int_en_clr_reg,
+						uint_en->sirfsoc_rx_timeout_en);
+					wr_regl(port, ureg->sirfsoc_int_en_reg,
+						uint_en->sirfsoc_rx_done_en);
+				}
+			}
+			sirfsoc_uart_pio_rx_chars(port, port->fifosize);
+		}
 	}
 	spin_unlock(&port->lock);
 	tty_flip_buffer_push(&state->port);
@@ -684,10 +577,10 @@ recv_char:
 				return IRQ_HANDLED;
 			} else {
 				sirfsoc_uart_pio_tx_chars(sirfport,
-					SIRFSOC_UART_IO_TX_REASONABLE_CNT);
+						port->fifosize);
 				if ((uart_circ_empty(xmit)) &&
 				(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
-				ufifo_st->ff_empty(port->line)))
+				ufifo_st->ff_empty(port)))
 					sirfsoc_uart_stop_tx(port);
 			}
 		}
@@ -697,41 +590,8 @@ recv_char:
 	return IRQ_HANDLED;
 }
 
-static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
-{
-	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
-	struct uart_port *port = &sirfport->port;
-	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
-	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-	unsigned long flags;
-	struct dma_tx_state tx_state;
-	spin_lock_irqsave(&port->lock, flags);
-	while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
-			sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
-		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
-					SIRFSOC_RX_DMA_BUF_SIZE);
-		if (rd_regl(port, ureg->sirfsoc_int_en_reg) &
-				uint_en->sirfsoc_rx_timeout_en)
-			sirfsoc_rx_submit_one_dma_desc(port,
-					sirfport->rx_completed++);
-		else
-			sirfport->rx_completed++;
-		sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
-	}
-	spin_unlock_irqrestore(&port->lock, flags);
-	tty_flip_buffer_push(&port->state->port);
-}
-
 static void sirfsoc_uart_rx_dma_complete_callback(void *param)
 {
-	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sirfport->port.lock, flags);
-	sirfport->rx_issued++;
-	sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT;
-	tasklet_schedule(&sirfport->rx_dma_complete_tasklet);
-	spin_unlock_irqrestore(&sirfport->port.lock, flags);
 }
 
 /* submit rx dma task into dmaengine */
@@ -740,21 +600,36 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
 	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-	int i;
 	sirfport->rx_io_count = 0;
 	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 		rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
 		~SIRFUART_IO_MODE);
-	for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
-		sirfsoc_rx_submit_one_dma_desc(port, i);
-	sirfport->rx_completed = sirfport->rx_issued = 0;
+	sirfport->rx_dma_items.xmit.tail =
+		sirfport->rx_dma_items.xmit.head = 0;
+	sirfport->rx_dma_items.desc =
+		dmaengine_prep_dma_cyclic(sirfport->rx_dma_chan,
+		sirfport->rx_dma_items.dma_addr, SIRFSOC_RX_DMA_BUF_SIZE,
+		SIRFSOC_RX_DMA_BUF_SIZE / 2,
+		DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+	if (IS_ERR_OR_NULL(sirfport->rx_dma_items.desc)) {
+		dev_err(port->dev, "DMA slave single fail\n");
+		return;
+	}
+	sirfport->rx_dma_items.desc->callback =
+		sirfsoc_uart_rx_dma_complete_callback;
+	sirfport->rx_dma_items.desc->callback_param = sirfport;
+	sirfport->rx_dma_items.cookie =
+		dmaengine_submit(sirfport->rx_dma_items.desc);
+	dma_async_issue_pending(sirfport->rx_dma_chan);
 	if (!sirfport->is_atlas7)
 		wr_regl(port, ureg->sirfsoc_int_en_reg,
 				rd_regl(port, ureg->sirfsoc_int_en_reg) |
-				SIRFUART_RX_DMA_INT_EN(port, uint_en));
+				SIRFUART_RX_DMA_INT_EN(uint_en,
+				sirfport->uart_reg->uart_type));
 	else
 		wr_regl(port, ureg->sirfsoc_int_en_reg,
-			SIRFUART_RX_DMA_INT_EN(port, uint_en));
+				SIRFUART_RX_DMA_INT_EN(uint_en,
+				sirfport->uart_reg->uart_type));
 }
 
 static void sirfsoc_uart_start_rx(struct uart_port *port)
@@ -773,10 +648,12 @@ static void sirfsoc_uart_start_rx(struct uart_port *port)
 		if (!sirfport->is_atlas7)
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
 				rd_regl(port, ureg->sirfsoc_int_en_reg) |
-				SIRFUART_RX_IO_INT_EN(port, uint_en));
+				SIRFUART_RX_IO_INT_EN(uint_en,
+					sirfport->uart_reg->uart_type));
 		else
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
-				SIRFUART_RX_IO_INT_EN(port, uint_en));
+				SIRFUART_RX_IO_INT_EN(uint_en,
+					sirfport->uart_reg->uart_type));
 	}
 }
 
@@ -789,7 +666,7 @@ sirfsoc_usp_calc_sample_div(unsigned long set_rate,
 	unsigned long ioclk_div = 0;
 	unsigned long temp_delta;
 
-	for (sample_div = SIRF_MIN_SAMPLE_DIV;
+	for (sample_div = SIRF_USP_MIN_SAMPLE_DIV;
 			sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
 		temp_delta = ioclk_rate -
 		(ioclk_rate + (set_rate * sample_div) / 2)
@@ -910,10 +787,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
 					config_reg |= SIRFUART_STICK_BIT_MARK;
 				else
 					config_reg |= SIRFUART_STICK_BIT_SPACE;
-			} else if (termios->c_cflag & PARODD) {
-				config_reg |= SIRFUART_STICK_BIT_ODD;
 			} else {
-				config_reg |= SIRFUART_STICK_BIT_EVEN;
+				if (termios->c_cflag & PARODD)
+					config_reg |= SIRFUART_STICK_BIT_ODD;
+				else
+					config_reg |= SIRFUART_STICK_BIT_EVEN;
 			}
 		}
 	} else {
@@ -976,7 +854,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
 	wr_regl(port, ureg->sirfsoc_tx_fifo_op,
 			(txfifo_op_reg & ~SIRFUART_FIFO_START));
 	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
-		config_reg |= SIRFUART_RECV_TIMEOUT(port, rx_time_out);
+		config_reg |= SIRFUART_UART_RECV_TIMEOUT(rx_time_out);
 		wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg);
 	} else {
 		/*tx frame ctrl*/
@@ -999,7 +877,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
 		wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val);
 		/*async param*/
 		wr_regl(port, ureg->sirfsoc_async_param_reg,
-			(SIRFUART_RECV_TIMEOUT(port, rx_time_out)) |
+			(SIRFUART_USP_RECV_TIMEOUT(rx_time_out)) |
 			(sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
 			SIRFSOC_USP_ASYNC_DIV2_OFFSET);
 	}
@@ -1011,6 +889,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
 		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE);
 	else
 		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE);
+	sirfport->rx_period_time = 20000000;
 	/* Reset Rx/Tx FIFO Threshold level for proper baudrate */
 	if (set_baud < 1000000)
 		threshold_div = 1;
@@ -1032,19 +911,10 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
 			      unsigned int oldstate)
 {
 	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
-	if (!state) {
-		if (sirfport->is_bt_uart) {
-			clk_prepare_enable(sirfport->clk_noc);
-			clk_prepare_enable(sirfport->clk_general);
-		}
+	if (!state)
 		clk_prepare_enable(sirfport->clk);
-	} else {
+	else
 		clk_disable_unprepare(sirfport->clk);
-		if (sirfport->is_bt_uart) {
-			clk_disable_unprepare(sirfport->clk_general);
-			clk_disable_unprepare(sirfport->clk_noc);
-		}
-	}
 }
 
 static int sirfsoc_uart_startup(struct uart_port *port)
@@ -1053,7 +923,7 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	unsigned int index			= port->line;
 	int ret;
-	set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN);
+	irq_modify_status(port->irq, IRQ_NOREQUEST, IRQ_NOAUTOEN);
 	ret = request_irq(port->irq,
 				sirfsoc_uart_isr,
 				0,
@@ -1064,7 +934,6 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 							index, port->irq);
 		goto irq_err;
 	}
-
 	/* initial hardware settings */
 	wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
 		rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) |
@@ -1072,6 +941,9 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 		rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
 		SIRFUART_IO_MODE);
+	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+		rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
+		~SIRFUART_RX_DMA_FLUSH);
 	wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0);
 	wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0);
 	wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN);
@@ -1080,7 +952,6 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 			SIRFSOC_USP_ENDIAN_CTRL_LSBF |
 			SIRFSOC_USP_EN);
 	wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET);
-	wr_regl(port, ureg->sirfsoc_tx_fifo_op, 0);
 	wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
 	wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 	wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
@@ -1100,8 +971,8 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 	sirfport->ms_enabled = false;
 	if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
 		sirfport->hw_flow_ctrl) {
-		set_irq_flags(gpio_to_irq(sirfport->cts_gpio),
-			IRQF_VALID | IRQF_NOAUTOEN);
+		irq_modify_status(gpio_to_irq(sirfport->cts_gpio),
+			IRQ_NOREQUEST, IRQ_NOAUTOEN);
 		ret = request_irq(gpio_to_irq(sirfport->cts_gpio),
 			sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING |
 			IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport);
@@ -1110,8 +981,16 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 			goto init_rx_err;
 		}
 	}
-
 	enable_irq(port->irq);
+	if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) {
+		sirfport->is_hrt_enabled = true;
+		sirfport->rx_period_time = 20000000;
+		sirfport->rx_dma_items.xmit.tail =
+			sirfport->rx_dma_items.xmit.head = 0;
+		hrtimer_start(&sirfport->hrt,
+			ns_to_ktime(sirfport->rx_period_time),
+			HRTIMER_MODE_REL);
+	}
 
 	return 0;
 init_rx_err:
@@ -1127,7 +1006,7 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
 	if (!sirfport->is_atlas7)
 		wr_regl(port, ureg->sirfsoc_int_en_reg, 0);
 	else
-		wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL);
+		wr_regl(port, ureg->sirfsoc_int_en_clr_reg, ~0UL);
 
 	free_irq(port->irq, sirfport);
 	if (sirfport->ms_enabled)
@@ -1139,6 +1018,13 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
 	}
 	if (sirfport->tx_dma_chan)
 		sirfport->tx_dma_state = TX_DMA_IDLE;
+	if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) {
+		while ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+			SIRFUART_RX_FIFO_MASK) > 0)
+			;
+		sirfport->is_hrt_enabled = false;
+		hrtimer_cancel(&sirfport->hrt);
+	}
 }
 
 static const char *sirfsoc_uart_type(struct uart_port *port)
@@ -1196,27 +1082,29 @@ sirfsoc_uart_console_setup(struct console *co, char *options)
 	unsigned int bits = 8;
 	unsigned int parity = 'n';
 	unsigned int flow = 'n';
-	struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
-	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
-	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
+	struct sirfsoc_uart_port *sirfport;
+	struct sirfsoc_register *ureg;
 	if (co->index < 0 || co->index >= SIRFSOC_UART_NR)
-		return -EINVAL;
-
-	if (!port->mapbase)
+		co->index = 1;
+	sirfport = sirf_ports[co->index];
+	if (!sirfport)
+		return -ENODEV;
+	ureg = &sirfport->uart_reg->uart_reg;
+	if (!sirfport->port.mapbase)
 		return -ENODEV;
 
 	/* enable usp in mode1 register */
 	if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
-		wr_regl(port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN |
+		wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN |
 				SIRFSOC_USP_ENDIAN_CTRL_LSBF);
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	port->cons = co;
+	sirfport->port.cons = co;
 
 	/* default console tx/rx transfer using io mode */
 	sirfport->rx_dma_chan = NULL;
 	sirfport->tx_dma_chan = NULL;
-	return uart_set_options(port, co, baud, parity, bits, flow);
+	return uart_set_options(&sirfport->port, co, baud, parity, bits, flow);
 }
 
 static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
@@ -1224,8 +1112,8 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
 	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
-	while (rd_regl(port,
-		ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line))
+	while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
+		ufifo_st->ff_full(port))
 		cpu_relax();
 	wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch);
 }
@@ -1233,8 +1121,10 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
 static void sirfsoc_uart_console_write(struct console *co, const char *s,
 							unsigned int count)
 {
-	struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
-	uart_console_write(port, s, count, sirfsoc_uart_console_putchar);
+	struct sirfsoc_uart_port *sirfport = sirf_ports[co->index];
+
+	uart_console_write(&sirfport->port, s, count,
+			sirfsoc_uart_console_putchar);
 }
 
 static struct console sirfsoc_uart_console = {
@@ -1269,10 +1159,75 @@ static struct uart_driver sirfsoc_uart_drv = {
 #endif
 };
 
-static const struct of_device_id sirfsoc_uart_ids[] = {
+static enum hrtimer_restart
+	sirfsoc_uart_rx_dma_hrtimer_callback(struct hrtimer *hrt)
+{
+	struct sirfsoc_uart_port *sirfport;
+	struct uart_port *port;
+	int count, inserted;
+	struct dma_tx_state tx_state;
+	struct tty_struct *tty;
+	struct sirfsoc_register *ureg;
+	struct circ_buf *xmit;
+
+	sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt);
+	port = &sirfport->port;
+	inserted = 0;
+	tty = port->state->port.tty;
+	ureg = &sirfport->uart_reg->uart_reg;
+	xmit = &sirfport->rx_dma_items.xmit;
+	dmaengine_tx_status(sirfport->rx_dma_chan,
+		sirfport->rx_dma_items.cookie, &tx_state);
+	xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
+	count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
+			SIRFSOC_RX_DMA_BUF_SIZE);
+	while (count > 0) {
+		inserted = tty_insert_flip_string(tty->port,
+			(const unsigned char *)&xmit->buf[xmit->tail], count);
+		if (!inserted)
+			goto next_hrt;
+		port->icount.rx += inserted;
+		xmit->tail = (xmit->tail + inserted) &
+				(SIRFSOC_RX_DMA_BUF_SIZE - 1);
+		count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
+				SIRFSOC_RX_DMA_BUF_SIZE);
+		tty_flip_buffer_push(tty->port);
+	}
+	/*
+	 * if RX DMA buffer data have all push into tty buffer, and there is
+	 * only little data(less than a dma transfer unit) left in rxfifo,
+	 * fetch it out in pio mode and switch back to dma immediately
+	 */
+	if (!inserted && !count &&
+		((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+		SIRFUART_RX_FIFO_MASK) > 0)) {
+		/* switch to pio mode */
+		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
+			SIRFUART_IO_MODE);
+		while ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+			SIRFUART_RX_FIFO_MASK) > 0) {
+			if (sirfsoc_uart_pio_rx_chars(port, 16) > 0)
+				tty_flip_buffer_push(tty->port);
+		}
+		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
+		wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
+		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
+		/* switch back to dma mode */
+		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
+			~SIRFUART_IO_MODE);
+	}
+next_hrt:
+	hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time));
+	return HRTIMER_RESTART;
+}
+
+static struct of_device_id sirfsoc_uart_ids[] = {
 	{ .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
 	{ .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart},
 	{ .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
+	{ .compatible = "sirf,atlas7-usp-uart", .data = &sirfsoc_usp},
 	{}
 };
 MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids);
@@ -1283,7 +1238,6 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
 	struct uart_port *port;
 	struct resource *res;
 	int ret;
-	int i, j;
 	struct dma_slave_config slv_cfg = {
 		.src_maxburst = 2,
 	};
@@ -1293,16 +1247,15 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 
 	match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node);
-	if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) {
-		dev_err(&pdev->dev,
-			"Unable to find cell-index in uart node.\n");
-		ret = -EFAULT;
+	sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL);
+	if (!sirfport) {
+		ret = -ENOMEM;
 		goto err;
 	}
-	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart"))
-		pdev->id += ((struct sirfsoc_uart_register *)
-				match->data)->uart_param.register_uart_nr;
-	sirfport = &sirfsoc_uart_ports[pdev->id];
+	sirfport->port.line = of_alias_get_id(pdev->dev.of_node, "serial");
+	sirf_ports[sirfport->port.line] = sirfport;
+	sirfport->port.iotype = UPIO_MEM;
+	sirfport->port.flags = UPF_BOOT_AUTOCONF;
 	port = &sirfport->port;
 	port->dev = &pdev->dev;
 	port->private_data = sirfport;
@@ -1310,9 +1263,12 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
 
 	sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node,
 		"sirf,uart-has-rtscts");
-	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart"))
+	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart") ||
+		of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart"))
 		sirfport->uart_reg->uart_type = SIRF_REAL_UART;
-	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) {
+	if (of_device_is_compatible(pdev->dev.of_node,
+		"sirf,prima2-usp-uart") || of_device_is_compatible(
+		pdev->dev.of_node, "sirf,atlas7-usp-uart")) {
 		sirfport->uart_reg->uart_type =	SIRF_USP_UART;
 		if (!sirfport->hw_flow_ctrl)
 			goto usp_no_flow_control;
@@ -1350,7 +1306,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
 		gpio_direction_output(sirfport->rts_gpio, 1);
 	}
 usp_no_flow_control:
-	if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart"))
+	if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart") ||
+	    of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-usp-uart"))
 		sirfport->is_atlas7 = true;
 
 	if (of_property_read_u32(pdev->dev.of_node,
@@ -1368,12 +1325,9 @@ usp_no_flow_control:
 		ret = -EFAULT;
 		goto err;
 	}
-	tasklet_init(&sirfport->rx_dma_complete_tasklet,
-			sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport);
-	tasklet_init(&sirfport->rx_tmo_process_tasklet,
-			sirfsoc_rx_tmo_process_tl, (unsigned long)sirfport);
 	port->mapbase = res->start;
-	port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	port->membase = devm_ioremap(&pdev->dev,
+			res->start, resource_size(res));
 	if (!port->membase) {
 		dev_err(&pdev->dev, "Cannot remap resource.\n");
 		ret = -ENOMEM;
@@ -1393,20 +1347,6 @@ usp_no_flow_control:
 		goto err;
 	}
 	port->uartclk = clk_get_rate(sirfport->clk);
-	if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-bt-uart")) {
-		sirfport->clk_general = devm_clk_get(&pdev->dev, "general");
-		if (IS_ERR(sirfport->clk_general)) {
-			ret = PTR_ERR(sirfport->clk_general);
-			goto err;
-		}
-		sirfport->clk_noc = devm_clk_get(&pdev->dev, "noc");
-		if (IS_ERR(sirfport->clk_noc)) {
-			ret = PTR_ERR(sirfport->clk_noc);
-			goto err;
-		}
-		sirfport->is_bt_uart = true;
-	} else
-		sirfport->is_bt_uart = false;
 
 	port->ops = &sirfsoc_uart_ops;
 	spin_lock_init(&port->lock);
@@ -1419,30 +1359,32 @@ usp_no_flow_control:
 	}
 
 	sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx");
-	for (i = 0; sirfport->rx_dma_chan && i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
-		sirfport->rx_dma_items[i].xmit.buf =
-			dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
-			&sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
-		if (!sirfport->rx_dma_items[i].xmit.buf) {
-			dev_err(port->dev, "Uart alloc bufa failed\n");
-			ret = -ENOMEM;
-			goto alloc_coherent_err;
-		}
-		sirfport->rx_dma_items[i].xmit.head =
-			sirfport->rx_dma_items[i].xmit.tail = 0;
+	sirfport->rx_dma_items.xmit.buf =
+		dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+		&sirfport->rx_dma_items.dma_addr, GFP_KERNEL);
+	if (!sirfport->rx_dma_items.xmit.buf) {
+		dev_err(port->dev, "Uart alloc bufa failed\n");
+		ret = -ENOMEM;
+		goto alloc_coherent_err;
 	}
+	sirfport->rx_dma_items.xmit.head =
+		sirfport->rx_dma_items.xmit.tail = 0;
 	if (sirfport->rx_dma_chan)
 		dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
 	sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx");
 	if (sirfport->tx_dma_chan)
 		dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
+	if (sirfport->rx_dma_chan) {
+		hrtimer_init(&sirfport->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		sirfport->hrt.function = sirfsoc_uart_rx_dma_hrtimer_callback;
+		sirfport->is_hrt_enabled = false;
+	}
 
 	return 0;
 alloc_coherent_err:
-	for (j = 0; j < i; j++)
-		dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
-				sirfport->rx_dma_items[j].xmit.buf,
-				sirfport->rx_dma_items[j].dma_addr);
+	dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+			sirfport->rx_dma_items.xmit.buf,
+			sirfport->rx_dma_items.dma_addr);
 	dma_release_channel(sirfport->rx_dma_chan);
 err:
 	return ret;
@@ -1454,13 +1396,11 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
 	struct uart_port *port = &sirfport->port;
 	uart_remove_one_port(&sirfsoc_uart_drv, port);
 	if (sirfport->rx_dma_chan) {
-		int i;
 		dmaengine_terminate_all(sirfport->rx_dma_chan);
 		dma_release_channel(sirfport->rx_dma_chan);
-		for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
-			dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
-					sirfport->rx_dma_items[i].xmit.buf,
-					sirfport->rx_dma_items[i].dma_addr);
+		dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+				sirfport->rx_dma_items.xmit.buf,
+				sirfport->rx_dma_items.dma_addr);
 	}
 	if (sirfport->tx_dma_chan) {
 		dmaengine_terminate_all(sirfport->tx_dma_chan);
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 727eb6b..eb162b0 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -6,11 +6,11 @@
  * Licensed under GPLv2 or later.
  */
 #include <linux/bitops.h>
+#include <linux/log2.h>
+#include <linux/hrtimer.h>
 struct sirfsoc_uart_param {
 	const char *uart_name;
 	const char *port_name;
-	u32 uart_nr;
-	u32 register_uart_nr;
 };
 
 struct sirfsoc_register {
@@ -21,6 +21,7 @@ struct sirfsoc_register {
 	u32 sirfsoc_tx_rx_en;
 	u32 sirfsoc_int_en_reg;
 	u32 sirfsoc_int_st_reg;
+	u32 sirfsoc_int_en_clr_reg;
 	u32 sirfsoc_tx_dma_io_ctrl;
 	u32 sirfsoc_tx_dma_io_len;
 	u32 sirfsoc_tx_fifo_ctrl;
@@ -45,8 +46,8 @@ struct sirfsoc_register {
 	u32 sirfsoc_async_param_reg;
 };
 
-typedef u32 (*fifo_full_mask)(int line);
-typedef u32 (*fifo_empty_mask)(int line);
+typedef u32 (*fifo_full_mask)(struct uart_port *port);
+typedef u32 (*fifo_empty_mask)(struct uart_port *port);
 
 struct sirfsoc_fifo_status {
 	fifo_full_mask ff_full;
@@ -105,21 +106,20 @@ struct sirfsoc_uart_register {
 	enum sirfsoc_uart_type uart_type;
 };
 
-u32 usp_ff_full(int line)
+u32 uart_usp_ff_full_mask(struct uart_port *port)
 {
-	return 0x80;
-}
-u32 usp_ff_empty(int line)
-{
-	return 0x100;
-}
-u32 uart_ff_full(int line)
-{
-	return (line == 1) ? (0x20) : (0x80);
+	u32 full_bit;
+
+	full_bit = ilog2(port->fifosize);
+	return (1 << full_bit);
 }
-u32 uart_ff_empty(int line)
+
+u32 uart_usp_ff_empty_mask(struct uart_port *port)
 {
-	return (line == 1) ? (0x40) : (0x100);
+	u32 empty_bit;
+
+	empty_bit = ilog2(port->fifosize) + 1;
+	return (1 << empty_bit);
 }
 struct sirfsoc_uart_register sirfsoc_usp = {
 	.uart_reg = {
@@ -145,6 +145,7 @@ struct sirfsoc_uart_register sirfsoc_usp = {
 		.sirfsoc_rx_fifo_op	= 0x0130,
 		.sirfsoc_rx_fifo_status	= 0x0134,
 		.sirfsoc_rx_fifo_data	= 0x0138,
+		.sirfsoc_int_en_clr_reg = 0x140,
 	},
 	.uart_int_en = {
 		.sirfsoc_rx_done_en	= BIT(0),
@@ -177,14 +178,12 @@ struct sirfsoc_uart_register sirfsoc_usp = {
 		.sirfsoc_rxd_brk	= BIT(15),
 	},
 	.fifo_status = {
-		.ff_full		= usp_ff_full,
-		.ff_empty		= usp_ff_empty,
+		.ff_full		= uart_usp_ff_full_mask,
+		.ff_empty		= uart_usp_ff_empty_mask,
 	},
 	.uart_param = {
 		.uart_name = "ttySiRF",
 		.port_name = "sirfsoc-uart",
-		.uart_nr = 2,
-		.register_uart_nr = 3,
 	},
 };
 
@@ -195,6 +194,7 @@ struct sirfsoc_uart_register sirfsoc_uart = {
 		.sirfsoc_divisor	= 0x0050,
 		.sirfsoc_int_en_reg	= 0x0054,
 		.sirfsoc_int_st_reg	= 0x0058,
+		.sirfsoc_int_en_clr_reg	= 0x0060,
 		.sirfsoc_tx_dma_io_ctrl	= 0x0100,
 		.sirfsoc_tx_dma_io_len	= 0x0104,
 		.sirfsoc_tx_fifo_ctrl	= 0x0108,
@@ -249,14 +249,12 @@ struct sirfsoc_uart_register sirfsoc_uart = {
 		.sirfsoc_rts		= BIT(15),
 	},
 	.fifo_status = {
-		.ff_full		= uart_ff_full,
-		.ff_empty		= uart_ff_empty,
+		.ff_full		= uart_usp_ff_full_mask,
+		.ff_empty		= uart_usp_ff_empty_mask,
 	},
 	.uart_param = {
 		.uart_name = "ttySiRF",
 		.port_name = "sirfsoc_uart",
-		.uart_nr = 3,
-		.register_uart_nr = 0,
 	},
 };
 /* uart io ctrl */
@@ -296,10 +294,10 @@ struct sirfsoc_uart_register sirfsoc_uart = {
 
 #define SIRFUART_IO_MODE			BIT(0)
 #define SIRFUART_DMA_MODE			0x0
+#define SIRFUART_RX_DMA_FLUSH			0x4
 
-/* Macro Specific*/
-#define SIRFUART_INT_EN_CLR                    0x0060
 /* Baud Rate Calculation */
+#define SIRF_USP_MIN_SAMPLE_DIV			0x1
 #define SIRF_MIN_SAMPLE_DIV			0xf
 #define SIRF_MAX_SAMPLE_DIV			0x3f
 #define SIRF_IOCLK_DIV_MAX			0xffff
@@ -326,55 +324,54 @@ struct sirfsoc_uart_register sirfsoc_uart = {
 #define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET	24
 #define SIRFSOC_USP_ASYNC_DIV2_MASK		0x3f
 #define SIRFSOC_USP_ASYNC_DIV2_OFFSET		16
-
+#define SIRFSOC_USP_LOOP_BACK_CTRL		BIT(2)
 /* USP-UART Common */
 #define SIRFSOC_UART_RX_TIMEOUT(br, to)	(((br) * (((to) + 999) / 1000)) / 1000)
 #define SIRFUART_RECV_TIMEOUT_VALUE(x)	\
 				(((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF))
-#define SIRFUART_RECV_TIMEOUT(port, x)	\
-		(((port)->line > 2) ? (x & 0xFFFF) : ((x) & 0xFFFF) << 16)
+#define SIRFUART_USP_RECV_TIMEOUT(x)	(x & 0xFFFF)
+#define SIRFUART_UART_RECV_TIMEOUT(x)	((x & 0xFFFF) << 16)
 
-#define SIRFUART_FIFO_THD(port)		((port->line) == 1 ? 16 : 64)
-#define SIRFUART_ERR_INT_STAT(port, unit_st)			\
+#define SIRFUART_FIFO_THD(port)		(port->fifosize >> 1)
+#define SIRFUART_ERR_INT_STAT(unit_st, uart_type)			\
 				(uint_st->sirfsoc_rx_oflow |		\
 				uint_st->sirfsoc_frm_err |		\
 				uint_st->sirfsoc_rxd_brk |		\
-		((port->line > 2) ? 0 : uint_st->sirfsoc_parity_err))
-#define SIRFUART_RX_IO_INT_EN(port, uint_en)				\
-				(uint_en->sirfsoc_rx_timeout_en |\
+				((uart_type != SIRF_REAL_UART) ? \
+				 0 : uint_st->sirfsoc_parity_err))
+#define SIRFUART_RX_IO_INT_EN(uint_en, uart_type)			\
+				(uint_en->sirfsoc_rx_done_en |\
 				 uint_en->sirfsoc_rxfifo_thd_en |\
 				 uint_en->sirfsoc_rxfifo_full_en |\
 				 uint_en->sirfsoc_frm_err_en |\
 				 uint_en->sirfsoc_rx_oflow_en |\
 				 uint_en->sirfsoc_rxd_brk_en |\
-		((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en))
+				((uart_type != SIRF_REAL_UART) ? \
+				 0 : uint_en->sirfsoc_parity_err_en))
 #define SIRFUART_RX_IO_INT_ST(uint_st)				\
-				(uint_st->sirfsoc_rx_timeout |\
-				 uint_st->sirfsoc_rxfifo_thd |\
-				 uint_st->sirfsoc_rxfifo_full)
+				(uint_st->sirfsoc_rxfifo_thd |\
+				 uint_st->sirfsoc_rxfifo_full|\
+				 uint_st->sirfsoc_rx_done |\
+				 uint_st->sirfsoc_rx_timeout)
 #define SIRFUART_CTS_INT_ST(uint_st)	(uint_st->sirfsoc_cts)
-#define SIRFUART_RX_DMA_INT_EN(port, uint_en)				\
-				(uint_en->sirfsoc_rx_timeout_en |\
-				 uint_en->sirfsoc_frm_err_en |\
+#define SIRFUART_RX_DMA_INT_EN(uint_en, uart_type)		\
+				(uint_en->sirfsoc_frm_err_en |\
 				 uint_en->sirfsoc_rx_oflow_en |\
 				 uint_en->sirfsoc_rxd_brk_en |\
-		((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en))
+				((uart_type != SIRF_REAL_UART) ? \
+				 0 : uint_en->sirfsoc_parity_err_en))
 /* Generic Definitions */
 #define SIRFSOC_UART_NAME			"ttySiRF"
 #define SIRFSOC_UART_MAJOR			0
 #define SIRFSOC_UART_MINOR			0
 #define SIRFUART_PORT_NAME			"sirfsoc-uart"
 #define SIRFUART_MAP_SIZE			0x200
-#define SIRFSOC_UART_NR				6
+#define SIRFSOC_UART_NR				11
 #define SIRFSOC_PORT_TYPE			0xa5
 
 /* Uart Common Use Macro*/
-#define SIRFSOC_RX_DMA_BUF_SIZE	256
+#define SIRFSOC_RX_DMA_BUF_SIZE		(1024 * 32)
 #define BYTES_TO_ALIGN(dma_addr)	((unsigned long)(dma_addr) & 0x3)
-#define LOOP_DMA_BUFA_FILL	1
-#define LOOP_DMA_BUFB_FILL	2
-#define TX_TRAN_PIO		1
-#define TX_TRAN_DMA		2
 /* Uart Fifo Level Chk */
 #define SIRFUART_TX_FIFO_SC_OFFSET	0
 #define SIRFUART_TX_FIFO_LC_OFFSET	10
@@ -389,8 +386,8 @@ struct sirfsoc_uart_register sirfsoc_uart = {
 #define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC
 #define	SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC
 #define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC
+#define SIRFUART_RX_FIFO_MASK 0x7f
 /* Indicate how many buffers used */
-#define SIRFSOC_RX_LOOP_BUF_CNT		2
 
 /* For Fast Baud Rate Calculation */
 struct sirfsoc_baudrate_to_regv {
@@ -404,7 +401,7 @@ enum sirfsoc_tx_state {
 	TX_DMA_PAUSE,
 };
 
-struct sirfsoc_loop_buffer {
+struct sirfsoc_rx_buffer {
 	struct circ_buf			xmit;
 	dma_cookie_t			cookie;
 	struct dma_async_tx_descriptor	*desc;
@@ -417,10 +414,6 @@ struct sirfsoc_uart_port {
 
 	struct uart_port		port;
 	struct clk			*clk;
-	/* UART6 for BT usage in A7DA platform need multi-clock source */
-	bool				is_bt_uart;
-	struct clk			*clk_general;
-	struct clk			*clk_noc;
 	/* for SiRFatlas7, there are SET/CLR for UART_INT_EN */
 	bool				is_atlas7;
 	struct sirfsoc_uart_register	*uart_reg;
@@ -428,17 +421,16 @@ struct sirfsoc_uart_port {
 	struct dma_chan			*tx_dma_chan;
 	dma_addr_t			tx_dma_addr;
 	struct dma_async_tx_descriptor	*tx_dma_desc;
-	struct tasklet_struct		rx_dma_complete_tasklet;
-	struct tasklet_struct		rx_tmo_process_tasklet;
 	unsigned int			rx_io_count;
 	unsigned long			transfer_size;
 	enum sirfsoc_tx_state		tx_dma_state;
 	unsigned int			cts_gpio;
 	unsigned int			rts_gpio;
 
-	struct sirfsoc_loop_buffer	rx_dma_items[SIRFSOC_RX_LOOP_BUF_CNT];
-	int				rx_completed;
-	int				rx_issued;
+	struct sirfsoc_rx_buffer	rx_dma_items;
+	struct hrtimer			hrt;
+	bool				is_hrt_enabled;
+	unsigned long			rx_period_time;
 };
 
 /* Register Access Control */
@@ -447,10 +439,6 @@ struct sirfsoc_uart_port {
 #define wr_regl(port, reg, val)		__raw_writel(val, portaddr(port, reg))
 
 /* UART Port Mask */
-#define SIRFUART_FIFOLEVEL_MASK(port)	((port->line == 1) ? (0x1f) : (0x7f))
-#define SIRFUART_FIFOFULL_MASK(port)	((port->line == 1) ? (0x20) : (0x80))
-#define SIRFUART_FIFOEMPTY_MASK(port)	((port->line == 1) ? (0x40) : (0x100))
-
-/* I/O Mode */
-#define SIRFSOC_UART_IO_RX_MAX_CNT		256
-#define SIRFSOC_UART_IO_TX_REASONABLE_CNT	256
+#define SIRFUART_FIFOLEVEL_MASK(port)	((port->fifosize - 1) & 0xFFF)
+#define SIRFUART_FIFOFULL_MASK(port)	(port->fifosize & 0xFFF)
+#define SIRFUART_FIFOEMPTY_MASK(port)	((port->fifosize & 0xFFF) << 1)
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 582d272..3866516 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -716,7 +716,7 @@ static int sprd_probe(struct platform_device *pdev)
 	up->flags = UPF_BOOT_AUTOCONF;
 
 	clk = devm_clk_get(&pdev->dev, NULL);
-	if (!IS_ERR(clk))
+	if (!IS_ERR_OR_NULL(clk))
 		up->uartclk = clk_get_rate(clk);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
new file mode 100644
index 0000000..4a6eab6
--- /dev/null
+++ b/drivers/tty/serial/stm32-usart.c
@@ -0,0 +1,739 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ *
+ * Inspired by st-asc.c from STMicroelectronics (c)
+ */
+
+#if defined(CONFIG_SERIAL_STM32_USART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+#include <linux/clk.h>
+
+#define DRIVER_NAME "stm32-usart"
+
+/* Register offsets */
+#define USART_SR		0x00
+#define USART_DR		0x04
+#define USART_BRR		0x08
+#define USART_CR1		0x0c
+#define USART_CR2		0x10
+#define USART_CR3		0x14
+#define USART_GTPR		0x18
+
+/* USART_SR */
+#define USART_SR_PE		BIT(0)
+#define USART_SR_FE		BIT(1)
+#define USART_SR_NF		BIT(2)
+#define USART_SR_ORE		BIT(3)
+#define USART_SR_IDLE		BIT(4)
+#define USART_SR_RXNE		BIT(5)
+#define USART_SR_TC		BIT(6)
+#define USART_SR_TXE		BIT(7)
+#define USART_SR_LBD		BIT(8)
+#define USART_SR_CTS		BIT(9)
+#define USART_SR_ERR_MASK	(USART_SR_LBD | USART_SR_ORE | \
+				 USART_SR_FE | USART_SR_PE)
+/* Dummy bits */
+#define USART_SR_DUMMY_RX	BIT(16)
+
+/* USART_DR */
+#define USART_DR_MASK		GENMASK(8, 0)
+
+/* USART_BRR */
+#define USART_BRR_DIV_F_MASK	GENMASK(3, 0)
+#define USART_BRR_DIV_M_MASK	GENMASK(15, 4)
+#define USART_BRR_DIV_M_SHIFT	4
+
+/* USART_CR1 */
+#define USART_CR1_SBK		BIT(0)
+#define USART_CR1_RWU		BIT(1)
+#define USART_CR1_RE		BIT(2)
+#define USART_CR1_TE		BIT(3)
+#define USART_CR1_IDLEIE	BIT(4)
+#define USART_CR1_RXNEIE	BIT(5)
+#define USART_CR1_TCIE		BIT(6)
+#define USART_CR1_TXEIE		BIT(7)
+#define USART_CR1_PEIE		BIT(8)
+#define USART_CR1_PS		BIT(9)
+#define USART_CR1_PCE		BIT(10)
+#define USART_CR1_WAKE		BIT(11)
+#define USART_CR1_M		BIT(12)
+#define USART_CR1_UE		BIT(13)
+#define USART_CR1_OVER8		BIT(15)
+#define USART_CR1_IE_MASK	GENMASK(8, 4)
+
+/* USART_CR2 */
+#define USART_CR2_ADD_MASK	GENMASK(3, 0)
+#define USART_CR2_LBDL		BIT(5)
+#define USART_CR2_LBDIE		BIT(6)
+#define USART_CR2_LBCL		BIT(8)
+#define USART_CR2_CPHA		BIT(9)
+#define USART_CR2_CPOL		BIT(10)
+#define USART_CR2_CLKEN		BIT(11)
+#define USART_CR2_STOP_2B	BIT(13)
+#define USART_CR2_STOP_MASK	GENMASK(13, 12)
+#define USART_CR2_LINEN		BIT(14)
+
+/* USART_CR3 */
+#define USART_CR3_EIE		BIT(0)
+#define USART_CR3_IREN		BIT(1)
+#define USART_CR3_IRLP		BIT(2)
+#define USART_CR3_HDSEL		BIT(3)
+#define USART_CR3_NACK		BIT(4)
+#define USART_CR3_SCEN		BIT(5)
+#define USART_CR3_DMAR		BIT(6)
+#define USART_CR3_DMAT		BIT(7)
+#define USART_CR3_RTSE		BIT(8)
+#define USART_CR3_CTSE		BIT(9)
+#define USART_CR3_CTSIE		BIT(10)
+#define USART_CR3_ONEBIT	BIT(11)
+
+/* USART_GTPR */
+#define USART_GTPR_PSC_MASK	GENMASK(7, 0)
+#define USART_GTPR_GT_MASK	GENMASK(15, 8)
+
+#define DRIVER_NAME "stm32-usart"
+#define STM32_SERIAL_NAME "ttyS"
+#define STM32_MAX_PORTS 6
+
+struct stm32_port {
+	struct uart_port port;
+	struct clk *clk;
+	bool hw_flow_control;
+};
+
+static struct stm32_port stm32_ports[STM32_MAX_PORTS];
+static struct uart_driver stm32_usart_driver;
+
+static void stm32_stop_tx(struct uart_port *port);
+
+static inline struct stm32_port *to_stm32_port(struct uart_port *port)
+{
+	return container_of(port, struct stm32_port, port);
+}
+
+static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits)
+{
+	u32 val;
+
+	val = readl_relaxed(port->membase + reg);
+	val |= bits;
+	writel_relaxed(val, port->membase + reg);
+}
+
+static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits)
+{
+	u32 val;
+
+	val = readl_relaxed(port->membase + reg);
+	val &= ~bits;
+	writel_relaxed(val, port->membase + reg);
+}
+
+static void stm32_receive_chars(struct uart_port *port)
+{
+	struct tty_port *tport = &port->state->port;
+	unsigned long c;
+	u32 sr;
+	char flag;
+
+	if (port->irq_wake)
+		pm_wakeup_event(tport->tty->dev, 0);
+
+	while ((sr = readl_relaxed(port->membase + USART_SR)) & USART_SR_RXNE) {
+		sr |= USART_SR_DUMMY_RX;
+		c = readl_relaxed(port->membase + USART_DR);
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (sr & USART_SR_ERR_MASK) {
+			if (sr & USART_SR_LBD) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			} else if (sr & USART_SR_ORE) {
+				port->icount.overrun++;
+			} else if (sr & USART_SR_PE) {
+				port->icount.parity++;
+			} else if (sr & USART_SR_FE) {
+				port->icount.frame++;
+			}
+
+			sr &= port->read_status_mask;
+
+			if (sr & USART_SR_LBD)
+				flag = TTY_BREAK;
+			else if (sr & USART_SR_PE)
+				flag = TTY_PARITY;
+			else if (sr & USART_SR_FE)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, c))
+			continue;
+		uart_insert_char(port, sr, USART_SR_ORE, c, flag);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(tport);
+	spin_lock(&port->lock);
+}
+
+static void stm32_transmit_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if (port->x_char) {
+		writel_relaxed(port->x_char, port->membase + USART_DR);
+		port->x_char = 0;
+		port->icount.tx++;
+		return;
+	}
+
+	if (uart_tx_stopped(port)) {
+		stm32_stop_tx(port);
+		return;
+	}
+
+	if (uart_circ_empty(xmit)) {
+		stm32_stop_tx(port);
+		return;
+	}
+
+	writel_relaxed(xmit->buf[xmit->tail], port->membase + USART_DR);
+	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+	port->icount.tx++;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		stm32_stop_tx(port);
+}
+
+static irqreturn_t stm32_interrupt(int irq, void *ptr)
+{
+	struct uart_port *port = ptr;
+	u32 sr;
+
+	spin_lock(&port->lock);
+
+	sr = readl_relaxed(port->membase + USART_SR);
+
+	if (sr & USART_SR_RXNE)
+		stm32_receive_chars(port);
+
+	if (sr & USART_SR_TXE)
+		stm32_transmit_chars(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int stm32_tx_empty(struct uart_port *port)
+{
+	return readl_relaxed(port->membase + USART_SR) & USART_SR_TXE;
+}
+
+static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+		stm32_set_bits(port, USART_CR3, USART_CR3_RTSE);
+	else
+		stm32_clr_bits(port, USART_CR3, USART_CR3_RTSE);
+}
+
+static unsigned int stm32_get_mctrl(struct uart_port *port)
+{
+	/* This routine is used to get signals of: DCD, DSR, RI, and CTS */
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/* Transmit stop */
+static void stm32_stop_tx(struct uart_port *port)
+{
+	stm32_clr_bits(port, USART_CR1, USART_CR1_TXEIE);
+}
+
+/* There are probably characters waiting to be transmitted. */
+static void stm32_start_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if (uart_circ_empty(xmit))
+		return;
+
+	stm32_set_bits(port, USART_CR1, USART_CR1_TXEIE | USART_CR1_TE);
+}
+
+/* Throttle the remote when input buffer is about to overflow. */
+static void stm32_throttle(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Unthrottle the remote, the input buffer can now accept data. */
+static void stm32_unthrottle(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	stm32_set_bits(port, USART_CR1, USART_CR1_RXNEIE);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Receive stop */
+static void stm32_stop_rx(struct uart_port *port)
+{
+	stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+}
+
+/* Handle breaks - ignored by us */
+static void stm32_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int stm32_startup(struct uart_port *port)
+{
+	const char *name = to_platform_device(port->dev)->name;
+	u32 val;
+	int ret;
+
+	ret = request_irq(port->irq, stm32_interrupt, IRQF_NO_SUSPEND,
+			  name, port);
+	if (ret)
+		return ret;
+
+	val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+	stm32_set_bits(port, USART_CR1, val);
+
+	return 0;
+}
+
+static void stm32_shutdown(struct uart_port *port)
+{
+	u32 val;
+
+	val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+	stm32_set_bits(port, USART_CR1, val);
+
+	free_irq(port->irq, port);
+}
+
+static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
+			    struct ktermios *old)
+{
+	struct stm32_port *stm32_port = to_stm32_port(port);
+	unsigned int baud;
+	u32 usartdiv, mantissa, fraction, oversampling;
+	tcflag_t cflag = termios->c_cflag;
+	u32 cr1, cr2, cr3;
+	unsigned long flags;
+
+	if (!stm32_port->hw_flow_control)
+		cflag &= ~CRTSCTS;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Stop serial port and reset value */
+	writel_relaxed(0, port->membase + USART_CR1);
+
+	cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE;
+	cr2 = 0;
+	cr3 = 0;
+
+	if (cflag & CSTOPB)
+		cr2 |= USART_CR2_STOP_2B;
+
+	if (cflag & PARENB) {
+		cr1 |= USART_CR1_PCE;
+		if ((cflag & CSIZE) == CS8)
+			cr1 |= USART_CR1_M;
+	}
+
+	if (cflag & PARODD)
+		cr1 |= USART_CR1_PS;
+
+	port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
+	if (cflag & CRTSCTS) {
+		port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
+		cr3 |= USART_CR3_CTSE;
+	}
+
+	usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
+
+	/*
+	 * The USART supports 16 or 8 times oversampling.
+	 * By default we prefer 16 times oversampling, so that the receiver
+	 * has a better tolerance to clock deviations.
+	 * 8 times oversampling is only used to achieve higher speeds.
+	 */
+	if (usartdiv < 16) {
+		oversampling = 8;
+		stm32_set_bits(port, USART_CR1, USART_CR1_OVER8);
+	} else {
+		oversampling = 16;
+		stm32_clr_bits(port, USART_CR1, USART_CR1_OVER8);
+	}
+
+	mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
+	fraction = usartdiv % oversampling;
+	writel_relaxed(mantissa | fraction, port->membase + USART_BRR);
+
+	uart_update_timeout(port, cflag, baud);
+
+	port->read_status_mask = USART_SR_ORE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= USART_SR_PE | USART_SR_FE;
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+		port->read_status_mask |= USART_SR_LBD;
+
+	/* Characters to ignore */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask = USART_SR_PE | USART_SR_FE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= USART_SR_LBD;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= USART_SR_ORE;
+	}
+
+	/* Ignore all characters if CREAD is not set */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= USART_SR_DUMMY_RX;
+
+	writel_relaxed(cr3, port->membase + USART_CR3);
+	writel_relaxed(cr2, port->membase + USART_CR2);
+	writel_relaxed(cr1, port->membase + USART_CR1);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *stm32_type(struct uart_port *port)
+{
+	return (port->type == PORT_STM32) ? DRIVER_NAME : NULL;
+}
+
+static void stm32_release_port(struct uart_port *port)
+{
+}
+
+static int stm32_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void stm32_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_STM32;
+}
+
+static int
+stm32_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	/* No user changeable parameters */
+	return -EINVAL;
+}
+
+static void stm32_pm(struct uart_port *port, unsigned int state,
+		unsigned int oldstate)
+{
+	struct stm32_port *stm32port = container_of(port,
+			struct stm32_port, port);
+	unsigned long flags = 0;
+
+	switch (state) {
+	case UART_PM_STATE_ON:
+		clk_prepare_enable(stm32port->clk);
+		break;
+	case UART_PM_STATE_OFF:
+		spin_lock_irqsave(&port->lock, flags);
+		stm32_clr_bits(port, USART_CR1, USART_CR1_UE);
+		spin_unlock_irqrestore(&port->lock, flags);
+		clk_disable_unprepare(stm32port->clk);
+		break;
+	}
+}
+
+static const struct uart_ops stm32_uart_ops = {
+	.tx_empty	= stm32_tx_empty,
+	.set_mctrl	= stm32_set_mctrl,
+	.get_mctrl	= stm32_get_mctrl,
+	.stop_tx	= stm32_stop_tx,
+	.start_tx	= stm32_start_tx,
+	.throttle	= stm32_throttle,
+	.unthrottle	= stm32_unthrottle,
+	.stop_rx	= stm32_stop_rx,
+	.break_ctl	= stm32_break_ctl,
+	.startup	= stm32_startup,
+	.shutdown	= stm32_shutdown,
+	.set_termios	= stm32_set_termios,
+	.pm		= stm32_pm,
+	.type		= stm32_type,
+	.release_port	= stm32_release_port,
+	.request_port	= stm32_request_port,
+	.config_port	= stm32_config_port,
+	.verify_port	= stm32_verify_port,
+};
+
+static int stm32_init_port(struct stm32_port *stm32port,
+			  struct platform_device *pdev)
+{
+	struct uart_port *port = &stm32port->port;
+	struct resource *res;
+	int ret;
+
+	port->iotype	= UPIO_MEM;
+	port->flags	= UPF_BOOT_AUTOCONF;
+	port->ops	= &stm32_uart_ops;
+	port->dev	= &pdev->dev;
+	port->irq	= platform_get_irq(pdev, 0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	port->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(port->membase))
+		return PTR_ERR(port->membase);
+	port->mapbase = res->start;
+
+	spin_lock_init(&port->lock);
+
+	stm32port->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(stm32port->clk))
+		return PTR_ERR(stm32port->clk);
+
+	/* Ensure that clk rate is correct by enabling the clk */
+	ret = clk_prepare_enable(stm32port->clk);
+	if (ret)
+		return ret;
+
+	stm32port->port.uartclk = clk_get_rate(stm32port->clk);
+	if (!stm32port->port.uartclk)
+		ret = -EINVAL;
+
+	clk_disable_unprepare(stm32port->clk);
+
+	return ret;
+}
+
+static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int id;
+
+	if (!np)
+		return NULL;
+
+	id = of_alias_get_id(np, "serial");
+	if (id < 0)
+		id = 0;
+
+	if (WARN_ON(id >= STM32_MAX_PORTS))
+		return NULL;
+
+	stm32_ports[id].hw_flow_control = of_property_read_bool(np,
+							"auto-flow-control");
+	stm32_ports[id].port.line = id;
+	return &stm32_ports[id];
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id stm32_match[] = {
+	{ .compatible = "st,stm32-usart", },
+	{ .compatible = "st,stm32-uart", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, stm32_match);
+#endif
+
+static int stm32_serial_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct stm32_port *stm32port;
+
+	stm32port = stm32_of_get_stm32_port(pdev);
+	if (!stm32port)
+		return -ENODEV;
+
+	ret = stm32_init_port(stm32port, pdev);
+	if (ret)
+		return ret;
+
+	ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, &stm32port->port);
+
+	return 0;
+}
+
+static int stm32_serial_remove(struct platform_device *pdev)
+{
+	struct uart_port *port = platform_get_drvdata(pdev);
+
+	return uart_remove_one_port(&stm32_usart_driver, port);
+}
+
+
+#ifdef CONFIG_SERIAL_STM32_CONSOLE
+static void stm32_console_putchar(struct uart_port *port, int ch)
+{
+	while (!(readl_relaxed(port->membase + USART_SR) & USART_SR_TXE))
+		cpu_relax();
+
+	writel_relaxed(ch, port->membase + USART_DR);
+}
+
+static void stm32_console_write(struct console *co, const char *s, unsigned cnt)
+{
+	struct uart_port *port = &stm32_ports[co->index].port;
+	unsigned long flags;
+	u32 old_cr1, new_cr1;
+	int locked = 1;
+
+	local_irq_save(flags);
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&port->lock);
+	else
+		spin_lock(&port->lock);
+
+	/* Save and disable interrupts */
+	old_cr1 = readl_relaxed(port->membase + USART_CR1);
+	new_cr1 = old_cr1 & ~USART_CR1_IE_MASK;
+	writel_relaxed(new_cr1, port->membase + USART_CR1);
+
+	uart_console_write(port, s, cnt, stm32_console_putchar);
+
+	/* Restore interrupt state */
+	writel_relaxed(old_cr1, port->membase + USART_CR1);
+
+	if (locked)
+		spin_unlock(&port->lock);
+	local_irq_restore(flags);
+}
+
+static int stm32_console_setup(struct console *co, char *options)
+{
+	struct stm32_port *stm32port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= STM32_MAX_PORTS)
+		return -ENODEV;
+
+	stm32port = &stm32_ports[co->index];
+
+	/*
+	 * This driver does not support early console initialization
+	 * (use ARM early printk support instead), so we only expect
+	 * this to be called during the uart port registration when the
+	 * driver gets probed and the port should be mapped at that point.
+	 */
+	if (stm32port->port.mapbase == 0 || stm32port->port.membase == NULL)
+		return -ENXIO;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&stm32port->port, co, baud, parity, bits, flow);
+}
+
+static struct console stm32_console = {
+	.name		= STM32_SERIAL_NAME,
+	.device		= uart_console_device,
+	.write		= stm32_console_write,
+	.setup		= stm32_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &stm32_usart_driver,
+};
+
+#define STM32_SERIAL_CONSOLE (&stm32_console)
+
+#else
+#define STM32_SERIAL_CONSOLE NULL
+#endif /* CONFIG_SERIAL_STM32_CONSOLE */
+
+static struct uart_driver stm32_usart_driver = {
+	.driver_name	= DRIVER_NAME,
+	.dev_name	= STM32_SERIAL_NAME,
+	.major		= 0,
+	.minor		= 0,
+	.nr		= STM32_MAX_PORTS,
+	.cons		= STM32_SERIAL_CONSOLE,
+};
+
+static struct platform_driver stm32_serial_driver = {
+	.probe		= stm32_serial_probe,
+	.remove		= stm32_serial_remove,
+	.driver	= {
+		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(stm32_match),
+	},
+};
+
+static int __init usart_init(void)
+{
+	static char banner[] __initdata = "STM32 USART driver initialized";
+	int ret;
+
+	pr_info("%s\n", banner);
+
+	ret = uart_register_driver(&stm32_usart_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&stm32_serial_driver);
+	if (ret)
+		uart_unregister_driver(&stm32_usart_driver);
+
+	return ret;
+}
+
+static void __exit usart_exit(void)
+{
+	platform_driver_unregister(&stm32_serial_driver);
+	uart_unregister_driver(&stm32_usart_driver);
+}
+
+module_init(usart_init);
+module_exit(usart_exit);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 3ddbac7..009e0db 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1075,7 +1075,8 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch)
 	writel(ch, port->membase + CDNS_UART_FIFO_OFFSET);
 }
 
-static void cdns_early_write(struct console *con, const char *s, unsigned n)
+static void __init cdns_early_write(struct console *con, const char *s,
+				    unsigned n)
 {
 	struct earlycon_device *dev = con->data;
 
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index b799170..2fac712 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -4410,7 +4410,8 @@ static void synclink_cleanup(void)
 	printk("Unloading %s: %s\n", driver_name, driver_version);
 
 	if (serial_driver) {
-		if ((rc = tty_unregister_driver(serial_driver)))
+		rc = tty_unregister_driver(serial_driver);
+		if (rc)
 			printk("%s(%d) failed to unregister tty driver err=%d\n",
 			       __FILE__,__LINE__,rc);
 		put_tty_driver(serial_driver);
@@ -7751,7 +7752,8 @@ static int hdlcdev_open(struct net_device *dev)
 		printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
 
 	/* generic HDLC layer open processing */
-	if ((rc = hdlc_open(dev)))
+	rc = hdlc_open(dev);
+	if (rc)
 		return rc;
 
 	/* arbitrate between network and tty opens */
@@ -8018,7 +8020,8 @@ static int hdlcdev_init(struct mgsl_struct *info)
 
 	/* allocate and initialize network and HDLC layer objects */
 
-	if (!(dev = alloc_hdlcdev(info))) {
+	dev = alloc_hdlcdev(info);
+	if (!dev) {
 		printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
 		return -ENOMEM;
 	}
@@ -8039,7 +8042,8 @@ static int hdlcdev_init(struct mgsl_struct *info)
 	hdlc->xmit   = hdlcdev_xmit;
 
 	/* register objects with HDLC layer */
-	if ((rc = register_hdlc_device(dev))) {
+	rc = register_hdlc_device(dev);
+	if (rc) {
 		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
 		free_netdev(dev);
 		return rc;
@@ -8075,7 +8079,8 @@ static int synclink_init_one (struct pci_dev *dev,
 		return -EIO;
 	}
 
-	if (!(info = mgsl_allocate_device())) {
+	info = mgsl_allocate_device();
+	if (!info) {
 		printk("can't allocate device instance data.\n");
 		return -EIO;
 	}
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 0e8c39b..0ea8eee 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1539,7 +1539,8 @@ static int hdlcdev_open(struct net_device *dev)
 	DBGINFO(("%s hdlcdev_open\n", dev->name));
 
 	/* generic HDLC layer open processing */
-	if ((rc = hdlc_open(dev)))
+	rc = hdlc_open(dev);
+	if (rc)
 		return rc;
 
 	/* arbitrate between network and tty opens */
@@ -1803,7 +1804,8 @@ static int hdlcdev_init(struct slgt_info *info)
 
 	/* allocate and initialize network and HDLC layer objects */
 
-	if (!(dev = alloc_hdlcdev(info))) {
+	dev = alloc_hdlcdev(info);
+	if (!dev) {
 		printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
 		return -ENOMEM;
 	}
@@ -1824,7 +1826,8 @@ static int hdlcdev_init(struct slgt_info *info)
 	hdlc->xmit   = hdlcdev_xmit;
 
 	/* register objects with HDLC layer */
-	if ((rc = register_hdlc_device(dev))) {
+	rc = register_hdlc_device(dev);
+	if (rc) {
 		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
 		free_netdev(dev);
 		return rc;
@@ -1879,7 +1882,8 @@ static void rx_async(struct slgt_info *info)
 
 			stat = 0;
 
-			if ((status = *(p+1) & (BIT1 + BIT0))) {
+			status = *(p + 1) & (BIT1 + BIT0);
+			if (status) {
 				if (status & BIT1)
 					icount->parity++;
 				else if (status & BIT0)
@@ -3755,7 +3759,8 @@ static void slgt_cleanup(void)
 	if (serial_driver) {
 		for (info=slgt_device_list ; info != NULL ; info=info->next_device)
 			tty_unregister_device(serial_driver, info->line);
-		if ((rc = tty_unregister_driver(serial_driver)))
+		rc = tty_unregister_driver(serial_driver);
+		if (rc)
 			DBGERR(("tty_unregister_driver error=%d\n", rc));
 		put_tty_driver(serial_driver);
 	}
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index c3f9091..08633a8 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1655,7 +1655,8 @@ static int hdlcdev_open(struct net_device *dev)
 		printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
 
 	/* generic HDLC layer open processing */
-	if ((rc = hdlc_open(dev)))
+	rc = hdlc_open(dev);
+	if (rc)
 		return rc;
 
 	/* arbitrate between network and tty opens */
@@ -1922,7 +1923,8 @@ static int hdlcdev_init(SLMP_INFO *info)
 
 	/* allocate and initialize network and HDLC layer objects */
 
-	if (!(dev = alloc_hdlcdev(info))) {
+	dev = alloc_hdlcdev(info);
+	if (!dev) {
 		printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
 		return -ENOMEM;
 	}
@@ -1943,7 +1945,8 @@ static int hdlcdev_init(SLMP_INFO *info)
 	hdlc->xmit   = hdlcdev_xmit;
 
 	/* register objects with HDLC layer */
-	if ((rc = register_hdlc_device(dev))) {
+	rc = register_hdlc_device(dev);
+	if (rc) {
 		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
 		free_netdev(dev);
 		return rc;
@@ -3920,7 +3923,8 @@ static void synclinkmp_cleanup(void)
 	printk("Unloading %s %s\n", driver_name, driver_version);
 
 	if (serial_driver) {
-		if ((rc = tty_unregister_driver(serial_driver)))
+		rc = tty_unregister_driver(serial_driver);
+		if (rc)
 			printk("%s(%d) failed to unregister tty driver err=%d\n",
 			       __FILE__,__LINE__,rc);
 		put_tty_driver(serial_driver);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 2f78b77..4cf263d 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -286,7 +286,8 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size,
 	change = (b->flags & TTYB_NORMAL) && (~flags & TTYB_NORMAL);
 	if (change || left < size) {
 		/* This is the slow path - looking for new buffers to use */
-		if ((n = tty_buffer_alloc(port, size)) != NULL) {
+		n = tty_buffer_alloc(port, size);
+		if (n != NULL) {
 			n->flags = flags;
 			buf->tail = n;
 			b->commit = b->used;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index e569546..57fc6ee 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -235,7 +235,6 @@ static void tty_del_file(struct file *file)
 /**
  *	tty_name	-	return tty naming
  *	@tty: tty structure
- *	@buf: buffer for output
  *
  *	Convert a tty structure into a name. The name reflects the kernel
  *	naming policy and if udev is in use may not reflect user space
@@ -243,13 +242,11 @@ static void tty_del_file(struct file *file)
  *	Locking: none
  */
 
-char *tty_name(struct tty_struct *tty, char *buf)
+const char *tty_name(const struct tty_struct *tty)
 {
 	if (!tty) /* Hmm.  NULL pointer.  That's fun. */
-		strcpy(buf, "NULL tty");
-	else
-		strcpy(buf, tty->name);
-	return buf;
+		return "NULL tty";
+	return tty->name;
 }
 
 EXPORT_SYMBOL(tty_name);
@@ -770,8 +767,7 @@ static void do_tty_hangup(struct work_struct *work)
 void tty_hangup(struct tty_struct *tty)
 {
 #ifdef TTY_DEBUG_HANGUP
-	char	buf[64];
-	printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf));
+	printk(KERN_DEBUG "%s hangup...\n", tty_name(tty));
 #endif
 	schedule_work(&tty->hangup_work);
 }
@@ -790,9 +786,7 @@ EXPORT_SYMBOL(tty_hangup);
 void tty_vhangup(struct tty_struct *tty)
 {
 #ifdef TTY_DEBUG_HANGUP
-	char	buf[64];
-
-	printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
+	printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty));
 #endif
 	__tty_hangup(tty, 0);
 }
@@ -831,9 +825,7 @@ void tty_vhangup_self(void)
 static void tty_vhangup_session(struct tty_struct *tty)
 {
 #ifdef TTY_DEBUG_HANGUP
-	char	buf[64];
-
-	printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty, buf));
+	printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty));
 #endif
 	__tty_hangup(tty, 1);
 }
@@ -1769,7 +1761,6 @@ int tty_release(struct inode *inode, struct file *filp)
 	struct tty_struct *o_tty = NULL;
 	int	do_sleep, final;
 	int	idx;
-	char	buf[64];
 	long	timeout = 0;
 	int	once = 1;
 
@@ -1793,7 +1784,7 @@ int tty_release(struct inode *inode, struct file *filp)
 
 #ifdef TTY_DEBUG_HANGUP
 	printk(KERN_DEBUG "%s: %s (tty count=%d)...\n", __func__,
-			tty_name(tty, buf), tty->count);
+			tty_name(tty), tty->count);
 #endif
 
 	if (tty->ops->close)
@@ -1844,7 +1835,7 @@ int tty_release(struct inode *inode, struct file *filp)
 		if (once) {
 			once = 0;
 			printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
-			       __func__, tty_name(tty, buf));
+			       __func__, tty_name(tty));
 		}
 		schedule_timeout_killable(timeout);
 		if (timeout < 120 * HZ)
@@ -1856,13 +1847,13 @@ int tty_release(struct inode *inode, struct file *filp)
 	if (o_tty) {
 		if (--o_tty->count < 0) {
 			printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n",
-				__func__, o_tty->count, tty_name(o_tty, buf));
+				__func__, o_tty->count, tty_name(o_tty));
 			o_tty->count = 0;
 		}
 	}
 	if (--tty->count < 0) {
 		printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n",
-				__func__, tty->count, tty_name(tty, buf));
+				__func__, tty->count, tty_name(tty));
 		tty->count = 0;
 	}
 
@@ -1905,7 +1896,7 @@ int tty_release(struct inode *inode, struct file *filp)
 		return 0;
 
 #ifdef TTY_DEBUG_HANGUP
-	printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty, buf));
+	printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty));
 #endif
 	/*
 	 * Ask the line discipline code to release its structures
@@ -1916,7 +1907,8 @@ int tty_release(struct inode *inode, struct file *filp)
 	tty_flush_works(tty);
 
 #ifdef TTY_DEBUG_HANGUP
-	printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__, tty_name(tty, buf));
+	printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__,
+	       tty_name(tty));
 #endif
 	/*
 	 * The release_tty function takes care of the details of clearing
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 8e53fe4..5232fb6 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -211,9 +211,7 @@ int tty_unthrottle_safe(struct tty_struct *tty)
 void tty_wait_until_sent(struct tty_struct *tty, long timeout)
 {
 #ifdef TTY_DEBUG_WAIT_UNTIL_SENT
-	char buf[64];
-
-	printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf));
+	printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty));
 #endif
 	if (!timeout)
 		timeout = MAX_SCHEDULE_TIMEOUT;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 3737f55..c07fb5d 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -22,9 +22,8 @@
 #undef LDISC_DEBUG_HANGUP
 
 #ifdef LDISC_DEBUG_HANGUP
-#define tty_ldisc_debug(tty, f, args...) ({				       \
-	char __b[64];							       \
-	printk(KERN_DEBUG "%s: %s: " f, __func__, tty_name(tty, __b), ##args); \
+#define tty_ldisc_debug(tty, f, args...) ({				  \
+	printk(KERN_DEBUG "%s: %s: " f, __func__, tty_name(tty), ##args); \
 })
 #else
 #define tty_ldisc_debug(tty, f, args...)
@@ -483,7 +482,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
 
 static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 {
-	char buf[64];
 	struct tty_ldisc *new_ldisc;
 	int r;
 
@@ -504,7 +502,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 		if (r < 0)
 			panic("Couldn't open N_TTY ldisc for "
 			      "%s --- error %d.",
-			      tty_name(tty, buf), r);
+			      tty_name(tty), r);
 	}
 }
 
diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
index 0ffb0cb..ad7eba5 100644
--- a/drivers/tty/tty_ldsem.c
+++ b/drivers/tty/tty_ldsem.c
@@ -299,7 +299,8 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout)
 		timeout = schedule_timeout(timeout);
 		raw_spin_lock_irq(&sem->wait_lock);
 		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-		if ((locked = writer_trylock(sem)))
+		locked = writer_trylock(sem);
+		if (locked)
 			break;
 	}
 
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 59b25e0..c8c91f0 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -261,19 +261,22 @@ u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode)
 	int m;
 	if (glyph < 0 || glyph >= MAX_GLYPH)
 		return 0;
-	else if (!(p = *conp->vc_uni_pagedir_loc))
-		return glyph;
-	else if (use_unicode) {
-		if (!p->inverse_trans_unicode)
+	else {
+		p = *conp->vc_uni_pagedir_loc;
+		if (!p)
 			return glyph;
-		else
-			return p->inverse_trans_unicode[glyph];
-	} else {
-		m = inv_translate[conp->vc_num];
-		if (!p->inverse_translations[m])
-			return glyph;
-		else
-			return p->inverse_translations[m][glyph];
+		else if (use_unicode) {
+			if (!p->inverse_trans_unicode)
+				return glyph;
+			else
+				return p->inverse_trans_unicode[glyph];
+			} else {
+			m = inv_translate[conp->vc_num];
+			if (!p->inverse_translations[m])
+				return glyph;
+			else
+				return p->inverse_translations[m][glyph];
+			}
 	}
 }
 EXPORT_SYMBOL_GPL(inverse_translate);
@@ -397,7 +400,8 @@ static void con_release_unimap(struct uni_pagedir *p)
 
 	if (p == dflt) dflt = NULL;  
 	for (i = 0; i < 32; i++) {
-		if ((p1 = p->uni_pgdir[i]) != NULL) {
+		p1 = p->uni_pgdir[i];
+		if (p1 != NULL) {
 			for (j = 0; j < 32; j++)
 				kfree(p1[j]);
 			kfree(p1);
@@ -473,14 +477,16 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
 	int i, n;
 	u16 **p1, *p2;
 
-	if (!(p1 = p->uni_pgdir[n = unicode >> 11])) {
+	p1 = p->uni_pgdir[n = unicode >> 11];
+	if (!p1) {
 		p1 = p->uni_pgdir[n] = kmalloc(32*sizeof(u16 *), GFP_KERNEL);
 		if (!p1) return -ENOMEM;
 		for (i = 0; i < 32; i++)
 			p1[i] = NULL;
 	}
 
-	if (!(p2 = p1[n = (unicode >> 6) & 0x1f])) {
+	p2 = p1[n = (unicode >> 6) & 0x1f];
+	if (!p2) {
 		p2 = p1[n] = kmalloc(64*sizeof(u16), GFP_KERNEL);
 		if (!p2) return -ENOMEM;
 		memset(p2, 0xff, 64*sizeof(u16)); /* No glyphs for the characters (yet) */
@@ -569,10 +575,12 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 		 * entries from "p" (old) to "q" (new).
 		 */
 		l = 0;		/* unicode value */
-		for (i = 0; i < 32; i++)
-		if ((p1 = p->uni_pgdir[i]))
-			for (j = 0; j < 32; j++)
-			if ((p2 = p1[j])) {
+		for (i = 0; i < 32; i++) {
+		p1 = p->uni_pgdir[i];
+		if (p1)
+			for (j = 0; j < 32; j++) {
+			p2 = p1[j];
+			if (p2) {
 				for (k = 0; k < 64; k++, l++)
 				if (p2[k] != 0xffff) {
 					/*
@@ -593,9 +601,11 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 				/* Account for row of 64 empty entries */
 				l += 64;
 			}
+		}
 		else
 			/* Account for empty table */
 			l += 32 * 64;
+		}
 
 		/*
 		 * Finished copying font table, set vc_uni_pagedir to new table
@@ -735,10 +745,12 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
 	ect = 0;
 	if (*vc->vc_uni_pagedir_loc) {
 		p = *vc->vc_uni_pagedir_loc;
-		for (i = 0; i < 32; i++)
-		if ((p1 = p->uni_pgdir[i]))
-			for (j = 0; j < 32; j++)
-			if ((p2 = *(p1++)))
+		for (i = 0; i < 32; i++) {
+		p1 = p->uni_pgdir[i];
+		if (p1)
+			for (j = 0; j < 32; j++) {
+			p2 = *(p1++);
+			if (p2)
 				for (k = 0; k < 64; k++) {
 					if (*p2 < MAX_GLYPH && ect++ < ct) {
 						__put_user((u_short)((i<<11)+(j<<6)+k),
@@ -749,6 +761,8 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
 					}
 					p2++;
 				}
+			}
+		}
 	}
 	__put_user(ect, uct);
 	console_unlock();
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 4a24eb2..8fe5298 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -108,6 +108,7 @@
 #define CON_DRIVER_FLAG_MODULE 1
 #define CON_DRIVER_FLAG_INIT   2
 #define CON_DRIVER_FLAG_ATTR   4
+#define CON_DRIVER_FLAG_ZOMBIE 8
 
 struct con_driver {
 	const struct consw *con;
@@ -135,6 +136,7 @@ const struct consw *conswitchp;
  */
 #define DEFAULT_BELL_PITCH	750
 #define DEFAULT_BELL_DURATION	(HZ/8)
+#define DEFAULT_CURSOR_BLINK_MS	200
 
 struct vc vc_cons [MAX_NR_CONSOLES];
 
@@ -153,6 +155,7 @@ static int set_vesa_blanking(char __user *p);
 static void set_cursor(struct vc_data *vc);
 static void hide_cursor(struct vc_data *vc);
 static void console_callback(struct work_struct *ignored);
+static void con_driver_unregister_callback(struct work_struct *ignored);
 static void blank_screen_t(unsigned long dummy);
 static void set_palette(struct vc_data *vc);
 
@@ -182,6 +185,7 @@ static int blankinterval = 10*60;
 core_param(consoleblank, blankinterval, int, 0444);
 
 static DECLARE_WORK(console_work, console_callback);
+static DECLARE_WORK(con_driver_unregister_work, con_driver_unregister_callback);
 
 /*
  * fg_console is the current virtual console,
@@ -1590,6 +1594,13 @@ static void setterm_command(struct vc_data *vc)
 		case 15: /* activate the previous console */
 			set_console(last_console);
 			break;
+		case 16: /* set cursor blink duration in msec */
+			if (vc->vc_npar >= 1 && vc->vc_par[1] >= 50 &&
+					vc->vc_par[1] <= USHRT_MAX)
+				vc->vc_cur_blink_ms = vc->vc_par[1];
+			else
+				vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS;
+			break;
 	}
 }
 
@@ -1717,6 +1728,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear)
 
 	vc->vc_bell_pitch = DEFAULT_BELL_PITCH;
 	vc->vc_bell_duration = DEFAULT_BELL_DURATION;
+	vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS;
 
 	gotoxy(vc, 0, 0);
 	save_cur(vc);
@@ -3192,22 +3204,6 @@ err:
 
 
 #ifdef CONFIG_VT_HW_CONSOLE_BINDING
-static int con_is_graphics(const struct consw *csw, int first, int last)
-{
-	int i, retval = 0;
-
-	for (i = first; i <= last; i++) {
-		struct vc_data *vc = vc_cons[i].d;
-
-		if (vc && vc->vc_mode == KD_GRAPHICS) {
-			retval = 1;
-			break;
-		}
-	}
-
-	return retval;
-}
-
 /* unlocked version of unbind_con_driver() */
 int do_unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
 {
@@ -3293,8 +3289,7 @@ static int vt_bind(struct con_driver *con)
 	const struct consw *defcsw = NULL, *csw = NULL;
 	int i, more = 1, first = -1, last = -1, deflt = 0;
 
- 	if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE) ||
-	    con_is_graphics(con->con, con->first, con->last))
+ 	if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE))
 		goto err;
 
 	csw = con->con;
@@ -3345,8 +3340,7 @@ static int vt_unbind(struct con_driver *con)
 	int i, more = 1, first = -1, last = -1, deflt = 0;
 	int ret;
 
- 	if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE) ||
-	    con_is_graphics(con->con, con->first, con->last))
+ 	if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE))
 		goto err;
 
 	csw = con->con;
@@ -3596,7 +3590,8 @@ static int do_register_con_driver(const struct consw *csw, int first, int last)
 	for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
 		con_driver = &registered_con_driver[i];
 
-		if (con_driver->con == NULL) {
+		if (con_driver->con == NULL &&
+		    !(con_driver->flag & CON_DRIVER_FLAG_ZOMBIE)) {
 			con_driver->con = csw;
 			con_driver->desc = desc;
 			con_driver->node = i;
@@ -3658,16 +3653,20 @@ int do_unregister_con_driver(const struct consw *csw)
 		struct con_driver *con_driver = &registered_con_driver[i];
 
 		if (con_driver->con == csw) {
-			vtconsole_deinit_device(con_driver);
-			device_destroy(vtconsole_class,
-				       MKDEV(0, con_driver->node));
+			/*
+			 * Defer the removal of the sysfs entries since that
+			 * will acquire the kernfs s_active lock and we can't
+			 * acquire this lock while holding the console lock:
+			 * the unbind sysfs entry imposes already the opposite
+			 * order. Reset con already here to prevent any later
+			 * lookup to succeed and mark this slot as zombie, so
+			 * it won't get reused until we complete the removal
+			 * in the deferred work.
+			 */
 			con_driver->con = NULL;
-			con_driver->desc = NULL;
-			con_driver->dev = NULL;
-			con_driver->node = 0;
-			con_driver->flag = 0;
-			con_driver->first = 0;
-			con_driver->last = 0;
+			con_driver->flag = CON_DRIVER_FLAG_ZOMBIE;
+			schedule_work(&con_driver_unregister_work);
+
 			return 0;
 		}
 	}
@@ -3676,6 +3675,39 @@ int do_unregister_con_driver(const struct consw *csw)
 }
 EXPORT_SYMBOL_GPL(do_unregister_con_driver);
 
+static void con_driver_unregister_callback(struct work_struct *ignored)
+{
+	int i;
+
+	console_lock();
+
+	for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
+		struct con_driver *con_driver = &registered_con_driver[i];
+
+		if (!(con_driver->flag & CON_DRIVER_FLAG_ZOMBIE))
+			continue;
+
+		console_unlock();
+
+		vtconsole_deinit_device(con_driver);
+		device_destroy(vtconsole_class, MKDEV(0, con_driver->node));
+
+		console_lock();
+
+		if (WARN_ON_ONCE(con_driver->con))
+			con_driver->con = NULL;
+		con_driver->desc = NULL;
+		con_driver->dev = NULL;
+		con_driver->node = 0;
+		WARN_ON_ONCE(con_driver->flag != CON_DRIVER_FLAG_ZOMBIE);
+		con_driver->flag = 0;
+		con_driver->first = 0;
+		con_driver->last = 0;
+	}
+
+	console_unlock();
+}
+
 /*
  *	If we support more console drivers, this function is used
  *	when a driver wants to take over some existing consoles