Merge tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty and serial driver pull request for 4.19-rc1.

  It's not all that big, just a number of small serial driver updates
  and fixes, along with some better vt handling for unicode characters
  for those using braille terminals.

  All of these patches have been in linux-next for a long time with no
  reported issues"

* tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits)
  tty: serial: 8250: Revert NXP SC16C2552 workaround
  serial: 8250_exar: Read INT0 from slave device, too
  tty: rocket: Fix possible buffer overwrite on register_PCI
  serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
  serial: 8250_dw: always set baud rate in dw8250_set_termios
  dt-bindings: serial: Add binding for uartlite
  tty: serial: uartlite: Add support for suspend and resume
  tty: serial: uartlite: Add clock adaptation
  tty: serial: uartlite: Add structure for private data
  serial: sh-sci: Improve support for separate TEI and DRI interrupts
  serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
  serial: sh-sci: Allow for compressed SCIF address
  serial: sh-sci: Improve interrupts description
  serial: 8250: Use cached port name directly in messages
  serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
  vt: drop unused struct vt_struct
  vt: avoid a VLA in the unicode screen scroll function
  vt: add /dev/vcsu* to devices.txt
  vt: coherence validation code for the unicode screen buffer
  vt: selection: take screen contents from uniscr if available
  ...

26 files changed, 1228 insertions, 321 deletions

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index b0e2c48..678406e 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -625,7 +625,7 @@ int ptm_open_peer(struct file *master, struct tty_struct *tty, int flags)
 	if (tty->driver != ptm_driver)
 		return -EIO;
 
-	fd = get_unused_fd_flags(0);
+	fd = get_unused_fd_flags(flags);
 	if (fd < 0) {
 		retval = fd;
 		goto err;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index bdd17d2..b121d8f 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1881,7 +1881,7 @@ static __init int register_PCI(int i, struct pci_dev *dev)
 	ByteIO_t UPCIRingInd = 0;
 
 	if (!dev || !pci_match_id(rocket_pci_ids, dev) ||
-	    pci_enable_device(dev))
+	    pci_enable_device(dev) || i >= NUM_BOARDS)
 		return 0;
 
 	rcktpt_io_addr[i] = pci_resource_start(dev, 0);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 9e59f47..9db93f5 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -13,6 +13,8 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 #include <linux/serdev.h>
 #include <linux/slab.h>
 
@@ -143,11 +145,28 @@ EXPORT_SYMBOL_GPL(serdev_device_remove);
 int serdev_device_open(struct serdev_device *serdev)
 {
 	struct serdev_controller *ctrl = serdev->ctrl;
+	int ret;
 
 	if (!ctrl || !ctrl->ops->open)
 		return -EINVAL;
 
-	return ctrl->ops->open(ctrl);
+	ret = ctrl->ops->open(ctrl);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_get_sync(&ctrl->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&ctrl->dev);
+		goto err_close;
+	}
+
+	return 0;
+
+err_close:
+	if (ctrl->ops->close)
+		ctrl->ops->close(ctrl);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(serdev_device_open);
 
@@ -158,6 +177,8 @@ void serdev_device_close(struct serdev_device *serdev)
 	if (!ctrl || !ctrl->ops->close)
 		return;
 
+	pm_runtime_put(&ctrl->dev);
+
 	ctrl->ops->close(ctrl);
 }
 EXPORT_SYMBOL_GPL(serdev_device_close);
@@ -330,8 +351,17 @@ EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
 static int serdev_drv_probe(struct device *dev)
 {
 	const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
+	int ret;
+
+	ret = dev_pm_domain_attach(dev, true);
+	if (ret)
+		return ret;
+
+	ret = sdrv->probe(to_serdev_device(dev));
+	if (ret)
+		dev_pm_domain_detach(dev, true);
 
-	return sdrv->probe(to_serdev_device(dev));
+	return ret;
 }
 
 static int serdev_drv_remove(struct device *dev)
@@ -339,6 +369,9 @@ static int serdev_drv_remove(struct device *dev)
 	const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
 	if (sdrv->remove)
 		sdrv->remove(to_serdev_device(dev));
+
+	dev_pm_domain_detach(dev, true);
+
 	return 0;
 }
 
@@ -416,6 +449,9 @@ struct serdev_controller *serdev_controller_alloc(struct device *parent,
 
 	dev_set_name(&ctrl->dev, "serial%d", id);
 
+	pm_runtime_no_callbacks(&ctrl->dev);
+	pm_suspend_ignore_children(&ctrl->dev, true);
+
 	dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
 	return ctrl;
 
@@ -547,20 +583,23 @@ int serdev_controller_add(struct serdev_controller *ctrl)
 	if (ret)
 		return ret;
 
+	pm_runtime_enable(&ctrl->dev);
+
 	ret_of = of_serdev_register_devices(ctrl);
 	ret_acpi = acpi_serdev_register_devices(ctrl);
 	if (ret_of && ret_acpi) {
 		dev_dbg(&ctrl->dev, "no devices registered: of:%d acpi:%d\n",
 			ret_of, ret_acpi);
 		ret = -ENODEV;
-		goto out_dev_del;
+		goto err_rpm_disable;
 	}
 
 	dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
 		ctrl->nr, &ctrl->dev);
 	return 0;
 
-out_dev_del:
+err_rpm_disable:
+	pm_runtime_disable(&ctrl->dev);
 	device_del(&ctrl->dev);
 	return ret;
 };
@@ -591,6 +630,7 @@ void serdev_controller_remove(struct serdev_controller *ctrl)
 
 	dummy = device_for_each_child(&ctrl->dev, NULL,
 				      serdev_remove_device);
+	pm_runtime_disable(&ctrl->dev);
 	device_del(&ctrl->dev);
 }
 EXPORT_SYMBOL_GPL(serdev_controller_remove);
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 9342fc2e..8fe3d0e 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -323,7 +323,7 @@ static int univ8250_setup_irq(struct uart_8250_port *up)
 	 * the port is opened so this value needs to be preserved.
 	 */
 	if (up->bugs & UART_BUG_THRE) {
-		pr_debug("ttyS%d - using backup timer\n", serial_index(port));
+		pr_debug("%s - using backup timer\n", port->name);
 
 		up->timer.function = serial8250_backup_timeout;
 		mod_timer(&up->timer, jiffies +
@@ -1023,6 +1023,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 			uart->port.get_mctrl = up->port.get_mctrl;
 		if (up->port.set_mctrl)
 			uart->port.set_mctrl = up->port.set_mctrl;
+		if (up->port.get_divisor)
+			uart->port.get_divisor = up->port.get_divisor;
+		if (up->port.set_divisor)
+			uart->port.set_divisor = up->port.set_divisor;
 		if (up->port.startup)
 			uart->port.startup = up->port.startup;
 		if (up->port.shutdown)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index aff04f1..fa8dcb4 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -31,6 +31,7 @@
 
 /* Offsets for the DesignWare specific registers */
 #define DW_UART_USR	0x1f /* UART Status Register */
+#define DW_UART_DLF	0xc0 /* Divisor Latch Fraction Register */
 #define DW_UART_CPR	0xf4 /* Component Parameter Register */
 #define DW_UART_UCV	0xf8 /* UART Component Version */
 
@@ -55,6 +56,7 @@
 
 struct dw8250_data {
 	u8			usr_reg;
+	u8			dlf_size;
 	int			line;
 	int			msr_mask_on;
 	int			msr_mask_off;
@@ -67,6 +69,21 @@ struct dw8250_data {
 	unsigned int		uart_16550_compatible:1;
 };
 
+static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
+{
+	if (p->iotype == UPIO_MEM32BE)
+		return ioread32be(p->membase + offset);
+	return readl(p->membase + offset);
+}
+
+static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg)
+{
+	if (p->iotype == UPIO_MEM32BE)
+		iowrite32be(reg, p->membase + offset);
+	else
+		writel(reg, p->membase + offset);
+}
+
 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
@@ -293,7 +310,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 	long rate;
 	int ret;
 
-	if (IS_ERR(d->clk) || !old)
+	if (IS_ERR(d->clk))
 		goto out;
 
 	clk_disable_unprepare(d->clk);
@@ -351,6 +368,37 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
 	return param == chan->device->dev->parent;
 }
 
+/*
+ * divisor = div(I) + div(F)
+ * "I" means integer, "F" means fractional
+ * quot = div(I) = clk / (16 * baud)
+ * frac = div(F) * 2^dlf_size
+ *
+ * let rem = clk % (16 * baud)
+ * we have: div(F) * (16 * baud) = rem
+ * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
+ */
+static unsigned int dw8250_get_divisor(struct uart_port *p,
+				       unsigned int baud,
+				       unsigned int *frac)
+{
+	unsigned int quot, rem, base_baud = baud * 16;
+	struct dw8250_data *d = p->private_data;
+
+	quot = p->uartclk / base_baud;
+	rem = p->uartclk % base_baud;
+	*frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);
+
+	return quot;
+}
+
+static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac)
+{
+	dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
+	serial8250_do_set_divisor(p, baud, quot, quot_frac);
+}
+
 static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 {
 	if (p->dev->of_node) {
@@ -404,20 +452,26 @@ static void dw8250_setup_port(struct uart_port *p)
 	 * If the Component Version Register returns zero, we know that
 	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
 	 */
-	if (p->iotype == UPIO_MEM32BE)
-		reg = ioread32be(p->membase + DW_UART_UCV);
-	else
-		reg = readl(p->membase + DW_UART_UCV);
+	reg = dw8250_readl_ext(p, DW_UART_UCV);
 	if (!reg)
 		return;
 
 	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
 		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
 
-	if (p->iotype == UPIO_MEM32BE)
-		reg = ioread32be(p->membase + DW_UART_CPR);
-	else
-		reg = readl(p->membase + DW_UART_CPR);
+	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
+	reg = dw8250_readl_ext(p, DW_UART_DLF);
+	dw8250_writel_ext(p, DW_UART_DLF, 0);
+
+	if (reg) {
+		struct dw8250_data *d = p->private_data;
+
+		d->dlf_size = fls(reg);
+		p->get_divisor = dw8250_get_divisor;
+		p->set_divisor = dw8250_set_divisor;
+	}
+
+	reg = dw8250_readl_ext(p, DW_UART_CPR);
 	if (!reg)
 		return;
 
@@ -693,6 +747,7 @@ static const struct of_device_id dw8250_of_match[] = {
 	{ .compatible = "snps,dw-apb-uart" },
 	{ .compatible = "cavium,octeon-3860-uart" },
 	{ .compatible = "marvell,armada-38x-uart" },
+	{ .compatible = "renesas,rzn1-uart" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
@@ -707,6 +762,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "APMC0D08", 0},
 	{ "AMD0020", 0 },
 	{ "AMDI0020", 0 },
+	{ "BRCM2032", 0 },
 	{ "HISI0031", 0 },
 	{ },
 };
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 38af306..0089aa3 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -109,11 +109,12 @@ struct exar8250_platform {
  * struct exar8250_board - board information
  * @num_ports: number of serial ports
  * @reg_shift: describes UART register mapping in PCI memory
+ * @setup: quirk run at ->probe() stage
+ * @exit: quirk run at ->remove() stage
  */
 struct exar8250_board {
 	unsigned int num_ports;
 	unsigned int reg_shift;
-	bool has_slave;
 	int	(*setup)(struct exar8250 *, struct pci_dev *,
 			 struct uart_8250_port *, int);
 	void	(*exit)(struct pci_dev *pcidev);
@@ -272,8 +273,32 @@ static int xr17v35x_register_gpio(struct pci_dev *pcidev,
 	return 0;
 }
 
+static int generic_rs485_config(struct uart_port *port,
+				struct serial_rs485 *rs485)
+{
+	bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
+	u8 __iomem *p = port->membase;
+	u8 value;
+
+	value = readb(p + UART_EXAR_FCTR);
+	if (is_rs485)
+		value |= UART_FCTR_EXAR_485;
+	else
+		value &= ~UART_FCTR_EXAR_485;
+
+	writeb(value, p + UART_EXAR_FCTR);
+
+	if (is_rs485)
+		writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
+
+	port->rs485 = *rs485;
+
+	return 0;
+}
+
 static const struct exar8250_platform exar8250_default_platform = {
 	.register_gpio = xr17v35x_register_gpio,
+	.rs485_config = generic_rs485_config,
 };
 
 static int iot2040_rs485_config(struct uart_port *port,
@@ -306,19 +331,7 @@ static int iot2040_rs485_config(struct uart_port *port,
 	value |= mode;
 	writeb(value, p + UART_EXAR_MPIOLVL_7_0);
 
-	value = readb(p + UART_EXAR_FCTR);
-	if (is_rs485)
-		value |= UART_FCTR_EXAR_485;
-	else
-		value &= ~UART_FCTR_EXAR_485;
-	writeb(value, p + UART_EXAR_FCTR);
-
-	if (is_rs485)
-		writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
-
-	port->rs485 = *rs485;
-
-	return 0;
+	return generic_rs485_config(port, rs485);
 }
 
 static const struct property_entry iot2040_gpio_properties[] = {
@@ -364,7 +377,6 @@ static int
 pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 		   struct uart_8250_port *port, int idx)
 {
-	const struct exar8250_board *board = priv->board;
 	const struct exar8250_platform *platform;
 	const struct dmi_system_id *dmi_match;
 	unsigned int offset = idx * 0x400;
@@ -382,10 +394,10 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	port->port.rs485_config = platform->rs485_config;
 
 	/*
-	 * Setup the uart clock for the devices on expansion slot to
+	 * Setup the UART clock for the devices on expansion slot to
 	 * half the clock speed of the main chip (which is 125MHz)
 	 */
-	if (board->has_slave && idx >= 8)
+	if (idx >= 8)
 		port->port.uartclk /= 2;
 
 	ret = default_setup(priv, pcidev, idx, offset, port);
@@ -433,7 +445,11 @@ static irqreturn_t exar_misc_handler(int irq, void *data)
 	struct exar8250 *priv = data;
 
 	/* Clear all PCI interrupts by reading INT0. No effect on IIR */
-	ioread8(priv->virt + UART_EXAR_INT0);
+	readb(priv->virt + UART_EXAR_INT0);
+
+	/* Clear INT0 for Expansion Interface slave ports, too */
+	if (priv->board->num_ports > 8)
+		readb(priv->virt + 0x2000 + UART_EXAR_INT0);
 
 	return IRQ_HANDLED;
 }
@@ -590,14 +606,12 @@ static const struct exar8250_board pbn_exar_XR17V35x = {
 
 static const struct exar8250_board pbn_exar_XR17V4358 = {
 	.num_ports	= 12,
-	.has_slave	= true,
 	.setup		= pci_xr17v35x_setup,
 	.exit		= pci_xr17v35x_exit,
 };
 
 static const struct exar8250_board pbn_exar_XR17V8358 = {
 	.num_ports	= 16,
-	.has_slave	= true,
 	.setup		= pci_xr17v35x_setup,
 	.exit		= pci_xr17v35x_exit,
 };
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index bfb37f0..af8beef 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -124,7 +124,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 				dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
 					 prop);
 				ret = -EINVAL;
-				goto err_dispose;
+				goto err_unprepare;
 			}
 		}
 		port->flags |= UPF_IOREMAP;
@@ -144,6 +144,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		port->line = ret;
 
 	port->irq = irq_of_parse_and_map(np, 0);
+	if (!port->irq) {
+		ret = -EPROBE_DEFER;
+		goto err_unprepare;
+	}
 
 	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
 	if (IS_ERR(info->rst)) {
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 1b337fe..a019286 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1115,6 +1115,7 @@ static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
 static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE;
 
 static const struct of_device_id omap8250_dt_ids[] = {
+	{ .compatible = "ti,am654-uart" },
 	{ .compatible = "ti,omap2-uart" },
 	{ .compatible = "ti,omap3-uart" },
 	{ .compatible = "ti,omap4-uart", .data = &omap4_habit, },
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index cf541aa..3f779d2 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -90,8 +90,7 @@ static const struct serial8250_config uart_config[] = {
 		.name		= "16550A",
 		.fifo_size	= 16,
 		.tx_loadsz	= 16,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
-				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},
@@ -1211,8 +1210,8 @@ static void autoconfig(struct uart_8250_port *up)
 	if (!port->iobase && !port->mapbase && !port->membase)
 		return;
 
-	DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
-		       serial_index(port), port->iobase, port->membase);
+	DEBUG_AUTOCONF("%s: autoconf (0x%04lx, 0x%p): ",
+		       port->name, port->iobase, port->membase);
 
 	/*
 	 * We really do need global IRQs disabled here - we're going to
@@ -1363,9 +1362,8 @@ out_lock:
 		fintek_8250_probe(up);
 
 	if (up->capabilities != old_capabilities) {
-		pr_warn("ttyS%d: detected caps %08x should be %08x\n",
-		       serial_index(port), old_capabilities,
-		       up->capabilities);
+		pr_warn("%s: detected caps %08x should be %08x\n",
+			port->name, old_capabilities, up->capabilities);
 	}
 out:
 	DEBUG_AUTOCONF("iir=%d ", scratch);
@@ -2212,8 +2210,7 @@ int serial8250_do_startup(struct uart_port *port)
 	 */
 	if (!(port->flags & UPF_BUGGY_UART) &&
 	    (serial_port_in(port, UART_LSR) == 0xff)) {
-		printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
-				   serial_index(port));
+		pr_info_ratelimited("%s: LSR safety check engaged!\n", port->name);
 		retval = -ENODEV;
 		goto out;
 	}
@@ -2245,8 +2242,8 @@ int serial8250_do_startup(struct uart_port *port)
 	     (port->type == PORT_ALTR_16550_F128)) && (port->fifosize > 1)) {
 		/* Bounds checking of TX threshold (valid 0 to fifosize-2) */
 		if ((up->tx_loadsz < 2) || (up->tx_loadsz > port->fifosize)) {
-			pr_err("ttyS%d TX FIFO Threshold errors, skipping\n",
-			       serial_index(port));
+			pr_err("%s TX FIFO Threshold errors, skipping\n",
+			       port->name);
 		} else {
 			serial_port_out(port, UART_ALTR_AFR,
 					UART_ALTR_EN_TXFIFO_LW);
@@ -2343,8 +2340,8 @@ int serial8250_do_startup(struct uart_port *port)
 	if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
 		if (!(up->bugs & UART_BUG_TXEN)) {
 			up->bugs |= UART_BUG_TXEN;
-			pr_debug("ttyS%d - enabling bad tx status workarounds\n",
-				 serial_index(port));
+			pr_debug("%s - enabling bad tx status workarounds\n",
+				 port->name);
 		}
 	} else {
 		up->bugs &= ~UART_BUG_TXEN;
@@ -2373,8 +2370,8 @@ dont_test_tx_en:
 	if (up->dma) {
 		retval = serial8250_request_dma(up);
 		if (retval) {
-			pr_warn_ratelimited("ttyS%d - failed to request DMA\n",
-					    serial_index(port));
+			pr_warn_ratelimited("%s - failed to request DMA\n",
+					    port->name);
 			up->dma = NULL;
 		}
 	}
@@ -2498,11 +2495,11 @@ static unsigned int npcm_get_divisor(struct uart_8250_port *up,
 	return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
 }
 
-static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
-					   unsigned int baud,
-					   unsigned int *frac)
+static unsigned int serial8250_do_get_divisor(struct uart_port *port,
+					      unsigned int baud,
+					      unsigned int *frac)
 {
-	struct uart_port *port = &up->port;
+	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned int quot;
 
 	/*
@@ -2532,6 +2529,16 @@ static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
 	return quot;
 }
 
+static unsigned int serial8250_get_divisor(struct uart_port *port,
+					   unsigned int baud,
+					   unsigned int *frac)
+{
+	if (port->get_divisor)
+		return port->get_divisor(port, baud, frac);
+
+	return serial8250_do_get_divisor(port, baud, frac);
+}
+
 static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
 					    tcflag_t c_cflag)
 {
@@ -2570,8 +2577,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
 	return cval;
 }
 
-static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
-			    unsigned int quot, unsigned int quot_frac)
+void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 
@@ -2602,6 +2609,16 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
 		serial_port_out(port, 0x2, quot_frac);
 	}
 }
+EXPORT_SYMBOL_GPL(serial8250_do_set_divisor);
+
+static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
+				   unsigned int quot, unsigned int quot_frac)
+{
+	if (port->set_divisor)
+		port->set_divisor(port, baud, quot, quot_frac);
+	else
+		serial8250_do_set_divisor(port, baud, quot, quot_frac);
+}
 
 static unsigned int serial8250_get_baud_rate(struct uart_port *port,
 					     struct ktermios *termios,
@@ -2636,7 +2653,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	cval = serial8250_compute_lcr(up, termios->c_cflag);
 
 	baud = serial8250_get_baud_rate(port, termios, old);
-	quot = serial8250_get_divisor(up, baud, &frac);
+	quot = serial8250_get_divisor(port, baud, &frac);
 
 	/*
 	 * Ok, we're now changing the port state.  Do it with
@@ -3197,7 +3214,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
 		termios.c_cflag = port->state->port.tty->termios.c_cflag;
 
 	baud = serial8250_get_baud_rate(port, &termios, NULL);
-	quot = serial8250_get_divisor(up, baud, &frac);
+	quot = serial8250_get_divisor(port, baud, &frac);
 
 	serial8250_set_divisor(port, baud, quot, frac);
 	serial_port_out(port, UART_LCR, up->lcr);
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 9963a76..c8186a0 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -638,8 +638,10 @@ static int serial_config(struct pcmcia_device *link)
 	    (link->has_func_id) &&
 	    (link->socket->pcmcia_pfc == 0) &&
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
-	     (link->func_id == CISTPL_FUNCID_SERIAL)))
-		pcmcia_loop_config(link, serial_check_for_multi, info);
+	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
+		if (pcmcia_loop_config(link, serial_check_for_multi, info))
+			goto failed;
+	}
 
 	/*
 	 * Apply any multi-port quirk.
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4e85357..239c0fa 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -314,7 +314,8 @@ static u32 imx_uart_readl(struct imx_port *sport, u32 offset)
 		/*
 		 * UCR2_SRST is the only bit in the cached registers that might
 		 * differ from the value that was last written. As it only
-		 * clears after being set, reread conditionally.
+		 * automatically becomes one after being cleared, reread
+		 * conditionally.
 		 */
 		if (!(sport->ucr2 & UCR2_SRST))
 			sport->ucr2 = readl(sport->port.membase + offset);
@@ -1051,7 +1052,7 @@ static void imx_uart_dma_rx_callback(void *data)
 	unsigned int r_bytes;
 	unsigned int bd_size;
 
-	status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
+	status = dmaengine_tx_status(chan, sport->rx_cookie, &state);
 
 	if (status == DMA_ERROR) {
 		imx_uart_clear_rx_errors(sport);
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index b6bd6e1..689774c 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -430,7 +430,6 @@ int jsm_uart_port_init(struct jsm_board *brd)
 {
 	int i, rc;
 	unsigned int line;
-	struct jsm_channel *ch;
 
 	if (!brd)
 		return -ENXIO;
@@ -444,7 +443,7 @@ int jsm_uart_port_init(struct jsm_board *brd)
 	brd->nasync = brd->maxports;
 
 	/* Set up channel variables */
-	for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+	for (i = 0; i < brd->nasync; i++) {
 
 		if (!brd->channels[i])
 			continue;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index efe55a1..3db48fc 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -531,8 +531,8 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
 	return 1;
 }
 
-static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
-			       bool xtal)
+static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
+			       unsigned long freq, bool xtal)
 {
 	unsigned int div, clksrc, pllcfg = 0;
 	long besterr = -1;
@@ -588,8 +588,14 @@ static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
 	regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc);
 
 	/* Wait for crystal */
-	if (pllcfg && xtal)
+	if (xtal) {
+		unsigned int val;
 		msleep(10);
+		regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
+		if (!(val & MAX310X_STS_CLKREADY_BIT)) {
+			dev_warn(dev, "clock is not stable yet\n");
+		}
+	}
 
 	return (int)bestfreq;
 }
@@ -1260,7 +1266,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
 				   MAX310X_MODE1_AUTOSLEEP_BIT);
 	}
 
-	uartclk = max310x_set_ref_clk(s, freq, xtal);
+	uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
 	dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
 
 	mutex_init(&s->mutex);
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index eda3c77..4932b67 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -887,7 +887,8 @@ static int serial_pxa_probe(struct platform_device *dev)
 		goto err_clk;
 	if (sport->port.line >= ARRAY_SIZE(serial_pxa_ports)) {
 		dev_err(&dev->dev, "serial%d out of range\n", sport->port.line);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_clk;
 	}
 	snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
 
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index c62e17c..29ec343 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -17,6 +17,7 @@
 #include <linux/tty_flip.h>
 
 /* UART specific GENI registers */
+#define SE_UART_LOOPBACK_CFG		0x22c
 #define SE_UART_TX_TRANS_CFG		0x25c
 #define SE_UART_TX_WORD_LEN		0x268
 #define SE_UART_TX_STOP_BIT_LEN		0x26c
@@ -26,6 +27,7 @@
 #define SE_UART_RX_STALE_CNT		0x294
 #define SE_UART_TX_PARITY_CFG		0x2a4
 #define SE_UART_RX_PARITY_CFG		0x2a8
+#define SE_UART_MANUAL_RFR		0x2ac
 
 /* SE_UART_TRANS_CFG */
 #define UART_TX_PAR_EN		BIT(0)
@@ -62,6 +64,11 @@
 #define PAR_SPACE		0x10
 #define PAR_MARK		0x11
 
+/* SE_UART_MANUAL_RFR register fields */
+#define UART_MANUAL_RFR_EN	BIT(31)
+#define UART_RFR_NOT_READY	BIT(1)
+#define UART_RFR_READY		BIT(0)
+
 /* UART M_CMD OP codes */
 #define UART_START_TX		0x1
 #define UART_START_BREAK	0x4
@@ -74,10 +81,12 @@
 #define STALE_TIMEOUT		16
 #define DEFAULT_BITS_PER_CHAR	10
 #define GENI_UART_CONS_PORTS	1
+#define GENI_UART_PORTS		3
 #define DEF_FIFO_DEPTH_WORDS	16
 #define DEF_TX_WM		2
 #define DEF_FIFO_WIDTH_BITS	32
 #define UART_CONSOLE_RX_WM	2
+#define MAX_LOOPBACK_CFG	3
 
 #ifdef CONFIG_CONSOLE_POLL
 #define RX_BYTES_PW 1
@@ -101,22 +110,81 @@ struct qcom_geni_serial_port {
 	unsigned int baud;
 	unsigned int tx_bytes_pw;
 	unsigned int rx_bytes_pw;
+	u32 *rx_fifo;
+	u32 loopback;
 	bool brk;
 };
 
 static const struct uart_ops qcom_geni_console_pops;
+static const struct uart_ops qcom_geni_uart_pops;
 static struct uart_driver qcom_geni_console_driver;
+static struct uart_driver qcom_geni_uart_driver;
 static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
+static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop);
 static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
 static void qcom_geni_serial_stop_rx(struct uart_port *uport);
 
 static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
 					32000000, 48000000, 64000000, 80000000,
-					96000000, 100000000};
+					96000000, 100000000, 102400000,
+					112000000, 120000000, 128000000};
 
 #define to_dev_port(ptr, member) \
 		container_of(ptr, struct qcom_geni_serial_port, member)
 
+static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = {
+	[0] = {
+		.uport = {
+				.iotype = UPIO_MEM,
+				.ops = &qcom_geni_uart_pops,
+				.flags = UPF_BOOT_AUTOCONF,
+				.line = 0,
+		},
+	},
+	[1] = {
+		.uport = {
+				.iotype = UPIO_MEM,
+				.ops = &qcom_geni_uart_pops,
+				.flags = UPF_BOOT_AUTOCONF,
+				.line = 1,
+		},
+	},
+	[2] = {
+		.uport = {
+				.iotype = UPIO_MEM,
+				.ops = &qcom_geni_uart_pops,
+				.flags = UPF_BOOT_AUTOCONF,
+				.line = 2,
+		},
+	},
+};
+
+static ssize_t loopback_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+
+	return snprintf(buf, sizeof(u32), "%d\n", port->loopback);
+}
+
+static ssize_t loopback_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t size)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+	u32 loopback;
+
+	if (kstrtoint(buf, 0, &loopback) || loopback > MAX_LOOPBACK_CFG) {
+		dev_err(dev, "Invalid input\n");
+		return -EINVAL;
+	}
+	port->loopback = loopback;
+	return size;
+}
+static DEVICE_ATTR_RW(loopback);
+
 static struct qcom_geni_serial_port qcom_geni_console_port = {
 	.uport = {
 		.iotype = UPIO_MEM,
@@ -148,14 +216,33 @@ static void qcom_geni_serial_config_port(struct uart_port *uport, int cfg_flags)
 	}
 }
 
-static unsigned int qcom_geni_cons_get_mctrl(struct uart_port *uport)
+static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport)
 {
-	return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
+	unsigned int mctrl = TIOCM_DSR | TIOCM_CAR;
+	u32 geni_ios;
+
+	if (uart_console(uport) || !uart_cts_enabled(uport)) {
+		mctrl |= TIOCM_CTS;
+	} else {
+		geni_ios = readl_relaxed(uport->membase + SE_GENI_IOS);
+		if (!(geni_ios & IO2_DATA_IN))
+			mctrl |= TIOCM_CTS;
+	}
+
+	return mctrl;
 }
 
-static void qcom_geni_cons_set_mctrl(struct uart_port *uport,
+static void qcom_geni_serial_set_mctrl(struct uart_port *uport,
 							unsigned int mctrl)
 {
+	u32 uart_manual_rfr = 0;
+
+	if (uart_console(uport) || !uart_cts_enabled(uport))
+		return;
+
+	if (!(mctrl & TIOCM_RTS))
+		uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY;
+	writel_relaxed(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR);
 }
 
 static const char *qcom_geni_serial_get_type(struct uart_port *uport)
@@ -163,11 +250,16 @@ static const char *qcom_geni_serial_get_type(struct uart_port *uport)
 	return "MSM";
 }
 
-static struct qcom_geni_serial_port *get_port_from_line(int line)
+static struct qcom_geni_serial_port *get_port_from_line(int line, bool console)
 {
-	if (line < 0 || line >= GENI_UART_CONS_PORTS)
+	struct qcom_geni_serial_port *port;
+	int nr_ports = console ? GENI_UART_CONS_PORTS : GENI_UART_PORTS;
+
+	if (line < 0 || line >= nr_ports)
 		return ERR_PTR(-ENXIO);
-	return &qcom_geni_console_port;
+
+	port = console ? &qcom_geni_console_port : &qcom_geni_uart_ports[line];
+	return port;
 }
 
 static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
@@ -346,7 +438,7 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
 
 	WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS);
 
-	port = get_port_from_line(co->index);
+	port = get_port_from_line(co->index, true);
 	if (IS_ERR(port))
 		return;
 
@@ -420,6 +512,32 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
 
 #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */
 
+static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
+{
+	unsigned char *buf;
+	struct tty_port *tport;
+	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE;
+	u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw;
+	int ret;
+
+	tport = &uport->state->port;
+	ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words);
+	if (drop)
+		return 0;
+
+	buf = (unsigned char *)port->rx_fifo;
+	ret = tty_insert_flip_string(tport, buf, bytes);
+	if (ret != bytes) {
+		dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n",
+				__func__, ret, bytes);
+		WARN_ON_ONCE(1);
+	}
+	uport->icount.rx += ret;
+	tty_flip_buffer_push(tport);
+	return ret;
+}
+
 static void qcom_geni_serial_start_tx(struct uart_port *uport)
 {
 	u32 irq_en;
@@ -586,6 +704,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
 	u32 status;
 	unsigned int chunk;
 	int tail;
+	u32 irq_en;
 
 	chunk = uart_circ_chars_pending(xmit);
 	status = readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS);
@@ -595,6 +714,13 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
 		goto out_write_wakeup;
 	}
 
+	if (!uart_console(uport)) {
+		irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
+		irq_en &= ~(M_TX_FIFO_WATERMARK_EN);
+		writel_relaxed(0, uport->membase + SE_GENI_TX_WATERMARK_REG);
+		writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
+	}
+
 	avail = (port->tx_fifo_depth - port->tx_wm) * port->tx_bytes_pw;
 	tail = xmit->tail;
 	chunk = min3((size_t)chunk, (size_t)(UART_XMIT_SIZE - tail), avail);
@@ -623,7 +749,8 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
 	}
 
 	xmit->tail = tail & (UART_XMIT_SIZE - 1);
-	qcom_geni_serial_poll_tx_done(uport);
+	if (uart_console(uport))
+		qcom_geni_serial_poll_tx_done(uport);
 out_write_wakeup:
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(uport);
@@ -710,7 +837,8 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
 	unsigned long flags;
 
 	/* Stop the console before stopping the current tx */
-	console_stop(uport->cons);
+	if (uart_console(uport))
+		console_stop(uport->cons);
 
 	free_irq(uport->irq, uport);
 	spin_lock_irqsave(&uport->lock, flags);
@@ -731,13 +859,20 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 	 * it else we could end up in data loss scenarios.
 	 */
 	port->xfer_mode = GENI_SE_FIFO;
-	qcom_geni_serial_poll_tx_done(uport);
+	if (uart_console(uport))
+		qcom_geni_serial_poll_tx_done(uport);
 	geni_se_config_packing(&port->se, BITS_PER_BYTE, port->tx_bytes_pw,
 						false, true, false);
 	geni_se_config_packing(&port->se, BITS_PER_BYTE, port->rx_bytes_pw,
 						false, false, true);
 	geni_se_init(&port->se, port->rx_wm, port->rx_rfr);
 	geni_se_select_mode(&port->se, port->xfer_mode);
+	if (!uart_console(uport)) {
+		port->rx_fifo = devm_kzalloc(uport->dev,
+			port->rx_fifo_depth * sizeof(u32), GFP_KERNEL);
+		if (!port->rx_fifo)
+			return -ENOMEM;
+	}
 	port->setup = true;
 	return 0;
 }
@@ -749,8 +884,13 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
 	scnprintf(port->name, sizeof(port->name),
-		  "qcom_serial_geni%d",	uport->line);
+		  "qcom_serial_%s%d",
+		(uart_console(uport) ? "console" : "uart"), uport->line);
 
+	if (!uart_console(uport)) {
+		port->tx_bytes_pw = 4;
+		port->rx_bytes_pw = RX_BYTES_PW;
+	}
 	proto = geni_se_read_proto(&port->se);
 	if (proto != GENI_SE_UART) {
 		dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto);
@@ -886,6 +1026,9 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 	if (baud)
 		uart_update_timeout(uport, termios->c_cflag, baud);
 
+	if (!uart_console(uport))
+		writel_relaxed(port->loopback,
+				uport->membase + SE_UART_LOOPBACK_CFG);
 	writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
 	writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
 	writel_relaxed(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
@@ -917,7 +1060,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
 	if (co->index >= GENI_UART_CONS_PORTS  || co->index < 0)
 		return -ENXIO;
 
-	port = get_port_from_line(co->index);
+	port = get_port_from_line(co->index, true);
 	if (IS_ERR(port)) {
 		pr_err("Invalid line %d\n", co->index);
 		return PTR_ERR(port);
@@ -1048,16 +1191,23 @@ static void console_unregister(struct uart_driver *drv)
 }
 #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */
 
-static void qcom_geni_serial_cons_pm(struct uart_port *uport,
+static struct uart_driver qcom_geni_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "qcom_geni_uart",
+	.dev_name = "ttyHS",
+	.nr =  GENI_UART_PORTS,
+};
+
+static void qcom_geni_serial_pm(struct uart_port *uport,
 		unsigned int new_state, unsigned int old_state)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
-	if (unlikely(!uart_console(uport)))
-		return;
-
 	if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF)
 		geni_se_resources_on(&port->se);
+	else if (!uart_console(uport) && (new_state == UART_PM_STATE_ON &&
+				old_state == UART_PM_STATE_UNDEFINED))
+		geni_se_resources_on(&port->se);
 	else if (new_state == UART_PM_STATE_OFF &&
 			old_state == UART_PM_STATE_ON)
 		geni_se_resources_off(&port->se);
@@ -1074,13 +1224,29 @@ static const struct uart_ops qcom_geni_console_pops = {
 	.config_port = qcom_geni_serial_config_port,
 	.shutdown = qcom_geni_serial_shutdown,
 	.type = qcom_geni_serial_get_type,
-	.set_mctrl = qcom_geni_cons_set_mctrl,
-	.get_mctrl = qcom_geni_cons_get_mctrl,
+	.set_mctrl = qcom_geni_serial_set_mctrl,
+	.get_mctrl = qcom_geni_serial_get_mctrl,
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_get_char	= qcom_geni_serial_get_char,
 	.poll_put_char	= qcom_geni_serial_poll_put_char,
 #endif
-	.pm = qcom_geni_serial_cons_pm,
+	.pm = qcom_geni_serial_pm,
+};
+
+static const struct uart_ops qcom_geni_uart_pops = {
+	.tx_empty = qcom_geni_serial_tx_empty,
+	.stop_tx = qcom_geni_serial_stop_tx,
+	.start_tx = qcom_geni_serial_start_tx,
+	.stop_rx = qcom_geni_serial_stop_rx,
+	.set_termios = qcom_geni_serial_set_termios,
+	.startup = qcom_geni_serial_startup,
+	.request_port = qcom_geni_serial_request_port,
+	.config_port = qcom_geni_serial_config_port,
+	.shutdown = qcom_geni_serial_shutdown,
+	.type = qcom_geni_serial_get_type,
+	.set_mctrl = qcom_geni_serial_set_mctrl,
+	.get_mctrl = qcom_geni_serial_get_mctrl,
+	.pm = qcom_geni_serial_pm,
 };
 
 static int qcom_geni_serial_probe(struct platform_device *pdev)
@@ -1091,13 +1257,23 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	struct uart_port *uport;
 	struct resource *res;
 	int irq;
+	bool console = false;
+	struct uart_driver *drv;
 
-	if (pdev->dev.of_node)
-		line = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
+		console = true;
 
-	if (line < 0 || line >= GENI_UART_CONS_PORTS)
-		return -ENXIO;
-	port = get_port_from_line(line);
+	if (pdev->dev.of_node) {
+		if (console) {
+			drv = &qcom_geni_console_driver;
+			line = of_alias_get_id(pdev->dev.of_node, "serial");
+		} else {
+			drv = &qcom_geni_uart_driver;
+			line = of_alias_get_id(pdev->dev.of_node, "hsuart");
+		}
+	}
+
+	port = get_port_from_line(line, console);
 	if (IS_ERR(port)) {
 		dev_err(&pdev->dev, "Invalid line %d\n", line);
 		return PTR_ERR(port);
@@ -1134,10 +1310,12 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	}
 	uport->irq = irq;
 
-	uport->private_data = &qcom_geni_console_driver;
+	uport->private_data = drv;
 	platform_set_drvdata(pdev, port);
-	port->handle_rx = handle_rx_console;
-	return uart_add_one_port(&qcom_geni_console_driver, uport);
+	port->handle_rx = console ? handle_rx_console : handle_rx_uart;
+	if (!console)
+		device_create_file(uport->dev, &dev_attr_loopback);
+	return uart_add_one_port(drv, uport);
 }
 
 static int qcom_geni_serial_remove(struct platform_device *pdev)
@@ -1154,7 +1332,17 @@ static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
-	uart_suspend_port(uport->private_data, uport);
+	if (uart_console(uport)) {
+		uart_suspend_port(uport->private_data, uport);
+	} else {
+		struct uart_state *state = uport->state;
+		/*
+		 * If the port is open, deny system suspend.
+		 */
+		if (state->pm_state == UART_PM_STATE_ON)
+			return -EBUSY;
+	}
+
 	return 0;
 }
 
@@ -1163,7 +1351,8 @@ static int __maybe_unused qcom_geni_serial_sys_resume_noirq(struct device *dev)
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
-	if (console_suspend_enabled && uport->suspended) {
+	if (uart_console(uport) &&
+			console_suspend_enabled && uport->suspended) {
 		uart_resume_port(uport->private_data, uport);
 		/*
 		 * uart_suspend_port() invokes port shutdown which in turn
@@ -1185,6 +1374,7 @@ static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
 
 static const struct of_device_id qcom_geni_serial_match_table[] = {
 	{ .compatible = "qcom,geni-debug-uart", },
+	{ .compatible = "qcom,geni-uart", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table);
@@ -1207,9 +1397,17 @@ static int __init qcom_geni_serial_init(void)
 	if (ret)
 		return ret;
 
+	ret = uart_register_driver(&qcom_geni_uart_driver);
+	if (ret) {
+		console_unregister(&qcom_geni_console_driver);
+		return ret;
+	}
+
 	ret = platform_driver_register(&qcom_geni_serial_platform_driver);
-	if (ret)
+	if (ret) {
 		console_unregister(&qcom_geni_console_driver);
+		uart_unregister_driver(&qcom_geni_uart_driver);
+	}
 	return ret;
 }
 module_init(qcom_geni_serial_init);
@@ -1218,6 +1416,7 @@ static void __exit qcom_geni_serial_exit(void)
 {
 	platform_driver_unregister(&qcom_geni_serial_platform_driver);
 	console_unregister(&qcom_geni_console_driver);
+	uart_unregister_driver(&qcom_geni_uart_driver);
 }
 module_exit(qcom_geni_serial_exit);
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 9c14a45..80bb56f 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -182,6 +182,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
 {
 	struct uart_port *uport = uart_port_check(state);
 	unsigned long page;
+	unsigned long flags = 0;
 	int retval = 0;
 
 	if (uport->type == PORT_UNKNOWN)
@@ -196,15 +197,18 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
 	 * Initialise and allocate the transmit and temporary
 	 * buffer.
 	 */
-	if (!state->xmit.buf) {
-		/* This is protected by the per port mutex */
-		page = get_zeroed_page(GFP_KERNEL);
-		if (!page)
-			return -ENOMEM;
+	page = get_zeroed_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
 
+	uart_port_lock(state, flags);
+	if (!state->xmit.buf) {
 		state->xmit.buf = (unsigned char *) page;
 		uart_circ_clear(&state->xmit);
+	} else {
+		free_page(page);
 	}
+	uart_port_unlock(uport, flags);
 
 	retval = uport->ops->startup(uport);
 	if (retval == 0) {
@@ -263,6 +267,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 {
 	struct uart_port *uport = uart_port_check(state);
 	struct tty_port *port = &state->port;
+	unsigned long flags = 0;
 
 	/*
 	 * Set the TTY IO error marker
@@ -295,10 +300,12 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 	/*
 	 * Free the transmit buffer page.
 	 */
+	uart_port_lock(state, flags);
 	if (state->xmit.buf) {
 		free_page((unsigned long)state->xmit.buf);
 		state->xmit.buf = NULL;
 	}
+	uart_port_unlock(uport, flags);
 }
 
 /**
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index c181eb3..ac4424b 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -65,6 +65,8 @@ enum {
 	SCIx_RXI_IRQ,
 	SCIx_TXI_IRQ,
 	SCIx_BRI_IRQ,
+	SCIx_DRI_IRQ,
+	SCIx_TEI_IRQ,
 	SCIx_NR_IRQS,
 
 	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
@@ -135,6 +137,8 @@ struct sci_port {
 	struct dma_chan			*chan_rx;
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct dma_chan			*chan_tx_saved;
+	struct dma_chan			*chan_rx_saved;
 	dma_cookie_t			cookie_tx;
 	dma_cookie_t			cookie_rx[2];
 	dma_cookie_t			active_rx;
@@ -315,15 +319,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 	[SCIx_SH4_SCIF_REGTYPE] = {
 		.regs = {
 			[SCSMR]		= { 0x00, 16 },
-			[SCBRR]		= { 0x04,  8 },
-			[SCSCR]		= { 0x08, 16 },
-			[SCxTDR]	= { 0x0c,  8 },
-			[SCxSR]		= { 0x10, 16 },
-			[SCxRDR]	= { 0x14,  8 },
-			[SCFCR]		= { 0x18, 16 },
-			[SCFDR]		= { 0x1c, 16 },
-			[SCSPTR]	= { 0x20, 16 },
-			[SCLSR]		= { 0x24, 16 },
+			[SCBRR]		= { 0x02,  8 },
+			[SCSCR]		= { 0x04, 16 },
+			[SCxTDR]	= { 0x06,  8 },
+			[SCxSR]		= { 0x08, 16 },
+			[SCxRDR]	= { 0x0a,  8 },
+			[SCFCR]		= { 0x0c, 16 },
+			[SCFDR]		= { 0x0e, 16 },
+			[SCSPTR]	= { 0x10, 16 },
+			[SCLSR]		= { 0x12, 16 },
 		},
 		.fifosize = 16,
 		.overrun_reg = SCLSR,
@@ -1212,25 +1216,16 @@ static int sci_dma_rx_find_active(struct sci_port *s)
 	return -1;
 }
 
-static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+static void sci_rx_dma_release(struct sci_port *s)
 {
-	struct dma_chan *chan = s->chan_rx;
-	struct uart_port *port = &s->port;
-	unsigned long flags;
+	struct dma_chan *chan = s->chan_rx_saved;
 
-	spin_lock_irqsave(&port->lock, flags);
-	s->chan_rx = NULL;
+	s->chan_rx_saved = s->chan_rx = NULL;
 	s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
-	spin_unlock_irqrestore(&port->lock, flags);
-	dmaengine_terminate_all(chan);
+	dmaengine_terminate_sync(chan);
 	dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
 			  sg_dma_address(&s->sg_rx[0]));
 	dma_release_channel(chan);
-	if (enable_pio) {
-		spin_lock_irqsave(&port->lock, flags);
-		sci_start_rx(port);
-		spin_unlock_irqrestore(&port->lock, flags);
-	}
 }
 
 static void start_hrtimer_us(struct hrtimer *hrt, unsigned long usec)
@@ -1289,33 +1284,31 @@ static void sci_dma_rx_complete(void *arg)
 fail:
 	spin_unlock_irqrestore(&port->lock, flags);
 	dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
-	sci_rx_dma_release(s, true);
+	/* Switch to PIO */
+	spin_lock_irqsave(&port->lock, flags);
+	s->chan_rx = NULL;
+	sci_start_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+static void sci_tx_dma_release(struct sci_port *s)
 {
-	struct dma_chan *chan = s->chan_tx;
-	struct uart_port *port = &s->port;
-	unsigned long flags;
+	struct dma_chan *chan = s->chan_tx_saved;
 
-	spin_lock_irqsave(&port->lock, flags);
-	s->chan_tx = NULL;
+	cancel_work_sync(&s->work_tx);
+	s->chan_tx_saved = s->chan_tx = NULL;
 	s->cookie_tx = -EINVAL;
-	spin_unlock_irqrestore(&port->lock, flags);
-	dmaengine_terminate_all(chan);
+	dmaengine_terminate_sync(chan);
 	dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
 			 DMA_TO_DEVICE);
 	dma_release_channel(chan);
-	if (enable_pio) {
-		spin_lock_irqsave(&port->lock, flags);
-		sci_start_tx(port);
-		spin_unlock_irqrestore(&port->lock, flags);
-	}
 }
 
 static void sci_submit_rx(struct sci_port *s)
 {
 	struct dma_chan *chan = s->chan_rx;
+	struct uart_port *port = &s->port;
+	unsigned long flags;
 	int i;
 
 	for (i = 0; i < 2; i++) {
@@ -1343,11 +1336,15 @@ static void sci_submit_rx(struct sci_port *s)
 
 fail:
 	if (i)
-		dmaengine_terminate_all(chan);
+		dmaengine_terminate_async(chan);
 	for (i = 0; i < 2; i++)
 		s->cookie_rx[i] = -EINVAL;
 	s->active_rx = -EINVAL;
-	sci_rx_dma_release(s, true);
+	/* Switch to PIO */
+	spin_lock_irqsave(&port->lock, flags);
+	s->chan_rx = NULL;
+	sci_start_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void work_fn_tx(struct work_struct *work)
@@ -1357,6 +1354,7 @@ static void work_fn_tx(struct work_struct *work)
 	struct dma_chan *chan = s->chan_tx;
 	struct uart_port *port = &s->port;
 	struct circ_buf *xmit = &port->state->xmit;
+	unsigned long flags;
 	dma_addr_t buf;
 
 	/*
@@ -1378,9 +1376,7 @@ static void work_fn_tx(struct work_struct *work)
 					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
-		/* switch to PIO */
-		sci_tx_dma_release(s, true);
-		return;
+		goto switch_to_pio;
 	}
 
 	dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
@@ -1393,15 +1389,21 @@ static void work_fn_tx(struct work_struct *work)
 	s->cookie_tx = dmaengine_submit(desc);
 	if (dma_submit_error(s->cookie_tx)) {
 		dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
-		/* switch to PIO */
-		sci_tx_dma_release(s, true);
-		return;
+		goto switch_to_pio;
 	}
 
 	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
 		__func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
 
 	dma_async_issue_pending(chan);
+	return;
+
+switch_to_pio:
+	spin_lock_irqsave(&port->lock, flags);
+	s->chan_tx = NULL;
+	sci_start_tx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+	return;
 }
 
 static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
@@ -1452,7 +1454,7 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
 	}
 
 	/* Handle incomplete DMA receive */
-	dmaengine_terminate_all(s->chan_rx);
+	dmaengine_terminate_async(s->chan_rx);
 	read = sg_dma_len(&s->sg_rx[active]) - state.residue;
 
 	if (read) {
@@ -1535,7 +1537,6 @@ static void sci_request_dma(struct uart_port *port)
 	chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV);
 	dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
 	if (chan) {
-		s->chan_tx = chan;
 		/* UART circular tx buffer is an aligned page. */
 		s->tx_dma_addr = dma_map_single(chan->device->dev,
 						port->state->xmit.buf,
@@ -1544,14 +1545,14 @@ static void sci_request_dma(struct uart_port *port)
 		if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
 			dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n");
 			dma_release_channel(chan);
-			s->chan_tx = NULL;
 		} else {
 			dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
 				__func__, UART_XMIT_SIZE,
 				port->state->xmit.buf, &s->tx_dma_addr);
-		}
 
-		INIT_WORK(&s->work_tx, work_fn_tx);
+			INIT_WORK(&s->work_tx, work_fn_tx);
+			s->chan_tx_saved = s->chan_tx = chan;
+		}
 	}
 
 	chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM);
@@ -1561,8 +1562,6 @@ static void sci_request_dma(struct uart_port *port)
 		dma_addr_t dma;
 		void *buf;
 
-		s->chan_rx = chan;
-
 		s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize);
 		buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2,
 					 &dma, GFP_KERNEL);
@@ -1570,7 +1569,6 @@ static void sci_request_dma(struct uart_port *port)
 			dev_warn(port->dev,
 				 "Failed to allocate Rx dma buffer, using PIO\n");
 			dma_release_channel(chan);
-			s->chan_rx = NULL;
 			return;
 		}
 
@@ -1591,6 +1589,8 @@ static void sci_request_dma(struct uart_port *port)
 
 		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 			sci_submit_rx(s);
+
+		s->chan_rx_saved = s->chan_rx = chan;
 	}
 }
 
@@ -1598,10 +1598,10 @@ static void sci_free_dma(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
 
-	if (s->chan_tx)
-		sci_tx_dma_release(s, false);
-	if (s->chan_rx)
-		sci_rx_dma_release(s, false);
+	if (s->chan_tx_saved)
+		sci_tx_dma_release(s);
+	if (s->chan_rx_saved)
+		sci_rx_dma_release(s);
 }
 
 static void sci_flush_buffer(struct uart_port *port)
@@ -1683,11 +1683,35 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t sci_br_interrupt(int irq, void *ptr)
+{
+	struct uart_port *port = ptr;
+
+	/* Handle BREAKs */
+	sci_handle_breaks(port);
+	sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t sci_er_interrupt(int irq, void *ptr)
 {
 	struct uart_port *port = ptr;
 	struct sci_port *s = to_sci_port(port);
 
+	if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) {
+		/* Break and Error interrupts are muxed */
+		unsigned short ssr_status = serial_port_in(port, SCxSR);
+
+		/* Break Interrupt */
+		if (ssr_status & SCxSR_BRK(port))
+			sci_br_interrupt(irq, ptr);
+
+		/* Break only? */
+		if (!(ssr_status & SCxSR_ERRORS(port)))
+			return IRQ_HANDLED;
+	}
+
 	/* Handle errors */
 	if (port->type == PORT_SCI) {
 		if (sci_handle_errors(port)) {
@@ -1710,17 +1734,6 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t sci_br_interrupt(int irq, void *ptr)
-{
-	struct uart_port *port = ptr;
-
-	/* Handle BREAKs */
-	sci_handle_breaks(port);
-	sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
-
-	return IRQ_HANDLED;
-}
-
 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
 	unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
@@ -1794,6 +1807,16 @@ static const struct sci_irq_desc {
 		.handler = sci_br_interrupt,
 	},
 
+	[SCIx_DRI_IRQ] = {
+		.desc = "rx ready",
+		.handler = sci_rx_interrupt,
+	},
+
+	[SCIx_TEI_IRQ] = {
+		.desc = "tx end",
+		.handler = sci_tx_interrupt,
+	},
+
 	/*
 	 * Special muxed handler.
 	 */
@@ -1806,12 +1829,19 @@ static const struct sci_irq_desc {
 static int sci_request_irq(struct sci_port *port)
 {
 	struct uart_port *up = &port->port;
-	int i, j, ret = 0;
+	int i, j, w, ret = 0;
 
 	for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
 		const struct sci_irq_desc *desc;
 		int irq;
 
+		/* Check if already registered (muxed) */
+		for (w = 0; w < i; w++)
+			if (port->irqs[w] == port->irqs[i])
+				w = i + 1;
+		if (w > i)
+			continue;
+
 		if (SCIx_IRQ_IS_MUXED(port)) {
 			i = SCIx_MUX_IRQ;
 			irq = up->irq;
@@ -2092,13 +2122,15 @@ static void sci_shutdown(struct uart_port *port)
 	spin_unlock_irqrestore(&port->lock, flags);
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
-	if (s->chan_rx) {
+	if (s->chan_rx_saved) {
 		dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__,
 			port->line);
 		hrtimer_cancel(&s->rx_timer);
 	}
 #endif
 
+	if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0)
+		del_timer_sync(&s->rx_fifo_timer);
 	sci_free_irq(s);
 	sci_free_dma(port);
 }
@@ -2778,7 +2810,7 @@ static int sci_init_single(struct platform_device *dev,
 {
 	struct uart_port *port = &sci_port->port;
 	const struct resource *res;
-	unsigned int i;
+	unsigned int i, regtype;
 	int ret;
 
 	sci_port->cfg	= p;
@@ -2799,22 +2831,23 @@ static int sci_init_single(struct platform_device *dev,
 
 	/* The SCI generates several interrupts. They can be muxed together or
 	 * connected to different interrupt lines. In the muxed case only one
-	 * interrupt resource is specified. In the non-muxed case three or four
-	 * interrupt resources are specified, as the BRI interrupt is optional.
+	 * interrupt resource is specified as there is only one interrupt ID.
+	 * In the non-muxed case, up to 6 interrupt signals might be generated
+	 * from the SCI, however those signals might have their own individual
+	 * interrupt ID numbers, or muxed together with another interrupt.
 	 */
 	if (sci_port->irqs[0] < 0)
 		return -ENXIO;
 
-	if (sci_port->irqs[1] < 0) {
-		sci_port->irqs[1] = sci_port->irqs[0];
-		sci_port->irqs[2] = sci_port->irqs[0];
-		sci_port->irqs[3] = sci_port->irqs[0];
-	}
+	if (sci_port->irqs[1] < 0)
+		for (i = 1; i < ARRAY_SIZE(sci_port->irqs); i++)
+			sci_port->irqs[i] = sci_port->irqs[0];
 
 	sci_port->params = sci_probe_regmap(p);
 	if (unlikely(sci_port->params == NULL))
 		return -EINVAL;
 
+	regtype = sci_port->params - sci_port_params;
 	switch (p->type) {
 	case PORT_SCIFB:
 		sci_port->rx_trigger = 48;
@@ -2869,6 +2902,10 @@ static int sci_init_single(struct platform_device *dev,
 			port->regshift = 1;
 	}
 
+	if (regtype == SCIx_SH4_SCIF_REGTYPE)
+		if (sci_port->reg_size >= 0x20)
+			port->regshift = 1;
+
 	/*
 	 * The UART port needs an IRQ value, so we peg this to the RX IRQ
 	 * for the multi-IRQ ports, which is where we are primarily
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index c47db78..98d3ead 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -21,6 +21,7 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/clk.h>
 
 #define ULITE_NAME		"ttyUL"
 #define ULITE_MAJOR		204
@@ -54,6 +55,11 @@
 #define ULITE_CONTROL_RST_RX	0x02
 #define ULITE_CONTROL_IE	0x10
 
+struct uartlite_data {
+	const struct uartlite_reg_ops *reg_ops;
+	struct clk *clk;
+};
+
 struct uartlite_reg_ops {
 	u32 (*in)(void __iomem *addr);
 	void (*out)(u32 val, void __iomem *addr);
@@ -91,16 +97,16 @@ static const struct uartlite_reg_ops uartlite_le = {
 
 static inline u32 uart_in32(u32 offset, struct uart_port *port)
 {
-	const struct uartlite_reg_ops *reg_ops = port->private_data;
+	struct uartlite_data *pdata = port->private_data;
 
-	return reg_ops->in(port->membase + offset);
+	return pdata->reg_ops->in(port->membase + offset);
 }
 
 static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
 {
-	const struct uartlite_reg_ops *reg_ops = port->private_data;
+	struct uartlite_data *pdata = port->private_data;
 
-	reg_ops->out(val, port->membase + offset);
+	pdata->reg_ops->out(val, port->membase + offset);
 }
 
 static struct uart_port ulite_ports[ULITE_NR_UARTS];
@@ -257,8 +263,15 @@ static void ulite_break_ctl(struct uart_port *port, int ctl)
 
 static int ulite_startup(struct uart_port *port)
 {
+	struct uartlite_data *pdata = port->private_data;
 	int ret;
 
+	ret = clk_enable(pdata->clk);
+	if (ret) {
+		dev_err(port->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
 	ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
 			  "uartlite", port);
 	if (ret)
@@ -273,9 +286,12 @@ static int ulite_startup(struct uart_port *port)
 
 static void ulite_shutdown(struct uart_port *port)
 {
+	struct uartlite_data *pdata = port->private_data;
+
 	uart_out32(0, ULITE_CONTROL, port);
 	uart_in32(ULITE_CONTROL, port); /* dummy */
 	free_irq(port->irq, port);
+	clk_disable(pdata->clk);
 }
 
 static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -325,6 +341,7 @@ static void ulite_release_port(struct uart_port *port)
 
 static int ulite_request_port(struct uart_port *port)
 {
+	struct uartlite_data *pdata = port->private_data;
 	int ret;
 
 	pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
@@ -342,13 +359,13 @@ static int ulite_request_port(struct uart_port *port)
 		return -EBUSY;
 	}
 
-	port->private_data = (void *)&uartlite_be;
+	pdata->reg_ops = &uartlite_be;
 	ret = uart_in32(ULITE_CONTROL, port);
 	uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port);
 	ret = uart_in32(ULITE_STATUS, port);
 	/* Endianess detection */
 	if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY)
-		port->private_data = (void *)&uartlite_le;
+		pdata->reg_ops = &uartlite_le;
 
 	return 0;
 }
@@ -365,6 +382,17 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return -EINVAL;
 }
 
+static void ulite_pm(struct uart_port *port, unsigned int state,
+		     unsigned int oldstate)
+{
+	struct uartlite_data *pdata = port->private_data;
+
+	if (!state)
+		clk_enable(pdata->clk);
+	else
+		clk_disable(pdata->clk);
+}
+
 #ifdef CONFIG_CONSOLE_POLL
 static int ulite_get_poll_char(struct uart_port *port)
 {
@@ -400,6 +428,7 @@ static const struct uart_ops ulite_ops = {
 	.request_port	= ulite_request_port,
 	.config_port	= ulite_config_port,
 	.verify_port	= ulite_verify_port,
+	.pm		= ulite_pm,
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_get_char	= ulite_get_poll_char,
 	.poll_put_char	= ulite_put_poll_char,
@@ -585,10 +614,12 @@ static struct uart_driver ulite_uart_driver = {
  * @id: requested id number.  Pass -1 for automatic port assignment
  * @base: base address of uartlite registers
  * @irq: irq number for uartlite
+ * @pdata: private data for uartlite
  *
  * Returns: 0 on success, <0 otherwise
  */
-static int ulite_assign(struct device *dev, int id, u32 base, int irq)
+static int ulite_assign(struct device *dev, int id, u32 base, int irq,
+			struct uartlite_data *pdata)
 {
 	struct uart_port *port;
 	int rc;
@@ -625,6 +656,7 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq)
 	port->dev = dev;
 	port->type = PORT_UNKNOWN;
 	port->line = id;
+	port->private_data = pdata;
 
 	dev_set_drvdata(dev, port);
 
@@ -658,10 +690,44 @@ static int ulite_release(struct device *dev)
 	return rc;
 }
 
+/**
+ * ulite_suspend - Stop the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 always.
+ */
+static int __maybe_unused ulite_suspend(struct device *dev)
+{
+	struct uart_port *port = dev_get_drvdata(dev);
+
+	if (port)
+		uart_suspend_port(&ulite_uart_driver, port);
+
+	return 0;
+}
+
+/**
+ * ulite_resume - Resume the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 on success, errno otherwise.
+ */
+static int __maybe_unused ulite_resume(struct device *dev)
+{
+	struct uart_port *port = dev_get_drvdata(dev);
+
+	if (port)
+		uart_resume_port(&ulite_uart_driver, port);
+
+	return 0;
+}
+
 /* ---------------------------------------------------------------------
  * Platform bus binding
  */
 
+static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume);
+
 #if defined(CONFIG_OF)
 /* Match table for of_platform binding */
 static const struct of_device_id ulite_of_match[] = {
@@ -675,7 +741,8 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
 static int ulite_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int irq;
+	struct uartlite_data *pdata;
+	int irq, ret;
 	int id = pdev->id;
 #ifdef CONFIG_OF
 	const __be32 *prop;
@@ -684,6 +751,10 @@ static int ulite_probe(struct platform_device *pdev)
 	if (prop)
 		id = be32_to_cpup(prop);
 #endif
+	pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
+			     GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -693,11 +764,33 @@ static int ulite_probe(struct platform_device *pdev)
 	if (irq <= 0)
 		return -ENXIO;
 
-	return ulite_assign(&pdev->dev, id, res->start, irq);
+	pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+	if (IS_ERR(pdata->clk)) {
+		if (PTR_ERR(pdata->clk) != -ENOENT)
+			return PTR_ERR(pdata->clk);
+
+		/*
+		 * Clock framework support is optional, continue on
+		 * anyways if we don't find a matching clock.
+		 */
+		pdata->clk = NULL;
+	}
+
+	ret = clk_prepare(pdata->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to prepare clock\n");
+		return ret;
+	}
+
+	return ulite_assign(&pdev->dev, id, res->start, irq, pdata);
 }
 
 static int ulite_remove(struct platform_device *pdev)
 {
+	struct uart_port *port = dev_get_drvdata(&pdev->dev);
+	struct uartlite_data *pdata = port->private_data;
+
+	clk_disable_unprepare(pdata->clk);
 	return ulite_release(&pdev->dev);
 }
 
@@ -710,6 +803,7 @@ static struct platform_driver ulite_platform_driver = {
 	.driver = {
 		.name  = "uartlite",
 		.of_match_table = of_match_ptr(ulite_of_match),
+		.pm = &ulite_pm_ops,
 	},
 };
 
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 8a3e342..a48f19b 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -167,6 +167,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
 #define CDNS_UART_SR_TXEMPTY	0x00000008 /* TX FIFO empty */
 #define CDNS_UART_SR_TXFULL	0x00000010 /* TX FIFO full */
 #define CDNS_UART_SR_RXTRIG	0x00000001 /* Rx Trigger */
+#define CDNS_UART_SR_TACTIVE	0x00000800 /* TX state machine active */
 
 /* baud dividers min/max values */
 #define CDNS_UART_BDIV_MIN	4
@@ -829,7 +830,7 @@ static int cdns_uart_startup(struct uart_port *port)
 	 * the receiver.
 	 */
 	status = readl(port->membase + CDNS_UART_CR);
-	status &= CDNS_UART_CR_RX_DIS;
+	status &= ~CDNS_UART_CR_RX_DIS;
 	status |= CDNS_UART_CR_RX_EN;
 	writel(status, port->membase + CDNS_UART_CR);
 
@@ -1099,23 +1100,14 @@ static const struct uart_ops cdns_uart_ops = {
 
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 /**
- * cdns_uart_console_wait_tx - Wait for the TX to be full
- * @port: Handle to the uart port structure
- */
-static void cdns_uart_console_wait_tx(struct uart_port *port)
-{
-	while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
-		barrier();
-}
-
-/**
  * cdns_uart_console_putchar - write the character to the FIFO buffer
  * @port: Handle to the uart port structure
  * @ch: Character to be written
  */
 static void cdns_uart_console_putchar(struct uart_port *port, int ch)
 {
-	cdns_uart_console_wait_tx(port);
+	while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)
+		cpu_relax();
 	writel(ch, port->membase + CDNS_UART_FIFO);
 }
 
@@ -1206,9 +1198,10 @@ static void cdns_uart_console_write(struct console *co, const char *s,
 	writel(ctrl, port->membase + CDNS_UART_CR);
 
 	uart_console_write(port, s, count, cdns_uart_console_putchar);
-	cdns_uart_console_wait_tx(port);
-
-	writel(ctrl, port->membase + CDNS_UART_CR);
+	while ((readl(port->membase + CDNS_UART_SR) &
+			(CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE)) !=
+			CDNS_UART_SR_TXEMPTY)
+		cpu_relax();
 
 	/* restore interrupt state */
 	writel(imr, port->membase + CDNS_UART_IER);
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
index 6ff8cdf..7576cea 100644
--- a/drivers/tty/tty_baudrate.c
+++ b/drivers/tty/tty_baudrate.c
@@ -100,11 +100,11 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
 
 	if (cbaud == B0)
 		return tty_termios_baud_rate(termios);
-
+#ifdef BOTHER
 	/* Magic token for arbitrary speed via c_ispeed*/
 	if (cbaud == BOTHER)
 		return termios->c_ispeed;
-
+#endif
 	if (cbaud & CBAUDEX) {
 		cbaud &= ~CBAUDEX;
 
@@ -114,9 +114,9 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
 			cbaud += 15;
 	}
 	return baud_table[cbaud];
-#else
+#else	/* IBSHIFT */
 	return tty_termios_baud_rate(termios);
-#endif
+#endif	/* IBSHIFT */
 }
 EXPORT_SYMBOL(tty_termios_input_baud_rate);
 
@@ -156,19 +156,27 @@ void tty_termios_encode_baud_rate(struct ktermios *termios,
 	termios->c_ispeed = ibaud;
 	termios->c_ospeed = obaud;
 
+#ifdef IBSHIFT
+	if ((termios->c_cflag >> IBSHIFT) & CBAUD)
+		ibinput = 1;	/* An input speed was specified */
+#endif
 #ifdef BOTHER
 	/* If the user asked for a precise weird speed give a precise weird
 	   answer. If they asked for a Bfoo speed they may have problems
 	   digesting non-exact replies so fuzz a bit */
 
-	if ((termios->c_cflag & CBAUD) == BOTHER)
+	if ((termios->c_cflag & CBAUD) == BOTHER) {
 		oclose = 0;
+		if (!ibinput)
+			iclose = 0;
+	}
 	if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
 		iclose = 0;
-	if ((termios->c_cflag >> IBSHIFT) & CBAUD)
-		ibinput = 1;	/* An input speed was specified */
 #endif
 	termios->c_cflag &= ~CBAUD;
+#ifdef IBSHIFT
+	termios->c_cflag &= ~(CBAUD << IBSHIFT);
+#endif
 
 	/*
 	 *	Our goal is to find a close match to the standard baud rate
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index aba5952..11c2df9 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -814,9 +814,9 @@ void start_tty(struct tty_struct *tty)
 }
 EXPORT_SYMBOL(start_tty);
 
-static void tty_update_time(struct timespec *time)
+static void tty_update_time(struct timespec64 *time)
 {
-	unsigned long sec = get_seconds();
+	time64_t sec = ktime_get_real_seconds();
 
 	/*
 	 * We only care if the two values differ in anything other than the
@@ -867,13 +867,8 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
 		i = -EIO;
 	tty_ldisc_deref(ld);
 
-	if (i > 0) {
-		struct timespec ts;
-
-		ts = timespec64_to_timespec(inode->i_atime);
-		tty_update_time(&ts);
-		inode->i_atime = timespec_to_timespec64(ts);
-	}
+	if (i > 0)
+		tty_update_time(&inode->i_atime);
 
 	return i;
 }
@@ -974,11 +969,7 @@ static inline ssize_t do_tty_write(
 		cond_resched();
 	}
 	if (written) {
-		struct timespec ts;
-
-		ts = timespec64_to_timespec(file_inode(file)->i_mtime);
-		tty_update_time(&ts);
-		file_inode(file)->i_mtime = timespec_to_timespec64(ts);
+		tty_update_time(&file_inode(file)->i_mtime);
 		ret = written;
 	}
 out:
diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
index 37a91b3..0c98d88 100644
--- a/drivers/tty/tty_ldsem.c
+++ b/drivers/tty/tty_ldsem.c
@@ -74,28 +74,6 @@ struct ldsem_waiter {
 	struct task_struct *task;
 };
 
-static inline long ldsem_atomic_update(long delta, struct ld_semaphore *sem)
-{
-	return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
-}
-
-/*
- * ldsem_cmpxchg() updates @*old with the last-known sem->count value.
- * Returns 1 if count was successfully changed; @*old will have @new value.
- * Returns 0 if count was not changed; @*old will have most recent sem->count
- */
-static inline int ldsem_cmpxchg(long *old, long new, struct ld_semaphore *sem)
-{
-	long tmp = atomic_long_cmpxchg(&sem->count, *old, new);
-	if (tmp == *old) {
-		*old = new;
-		return 1;
-	} else {
-		*old = tmp;
-		return 0;
-	}
-}
-
 /*
  * Initialize an ldsem:
  */
@@ -109,7 +87,7 @@ void __init_ldsem(struct ld_semaphore *sem, const char *name,
 	debug_check_no_locks_freed((void *)sem, sizeof(*sem));
 	lockdep_init_map(&sem->dep_map, name, key, 0);
 #endif
-	sem->count = LDSEM_UNLOCKED;
+	atomic_long_set(&sem->count, LDSEM_UNLOCKED);
 	sem->wait_readers = 0;
 	raw_spin_lock_init(&sem->wait_lock);
 	INIT_LIST_HEAD(&sem->read_wait);
@@ -122,16 +100,17 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem)
 	struct task_struct *tsk;
 	long adjust, count;
 
-	/* Try to grant read locks to all readers on the read wait list.
+	/*
+	 * Try to grant read locks to all readers on the read wait list.
 	 * Note the 'active part' of the count is incremented by
 	 * the number of readers before waking any processes up.
 	 */
 	adjust = sem->wait_readers * (LDSEM_ACTIVE_BIAS - LDSEM_WAIT_BIAS);
-	count = ldsem_atomic_update(adjust, sem);
+	count = atomic_long_add_return(adjust, &sem->count);
 	do {
 		if (count > 0)
 			break;
-		if (ldsem_cmpxchg(&count, count - adjust, sem))
+		if (atomic_long_try_cmpxchg(&sem->count, &count, count - adjust))
 			return;
 	} while (1);
 
@@ -148,14 +127,15 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem)
 
 static inline int writer_trylock(struct ld_semaphore *sem)
 {
-	/* only wake this writer if the active part of the count can be
+	/*
+	 * Only wake this writer if the active part of the count can be
 	 * transitioned from 0 -> 1
 	 */
-	long count = ldsem_atomic_update(LDSEM_ACTIVE_BIAS, sem);
+	long count = atomic_long_add_return(LDSEM_ACTIVE_BIAS, &sem->count);
 	do {
 		if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS)
 			return 1;
-		if (ldsem_cmpxchg(&count, count - LDSEM_ACTIVE_BIAS, sem))
+		if (atomic_long_try_cmpxchg(&sem->count, &count, count - LDSEM_ACTIVE_BIAS))
 			return 0;
 	} while (1);
 }
@@ -205,12 +185,16 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout)
 	/* set up my own style of waitqueue */
 	raw_spin_lock_irq(&sem->wait_lock);
 
-	/* Try to reverse the lock attempt but if the count has changed
+	/*
+	 * Try to reverse the lock attempt but if the count has changed
 	 * so that reversing fails, check if there are are no waiters,
-	 * and early-out if not */
+	 * and early-out if not
+	 */
 	do {
-		if (ldsem_cmpxchg(&count, count + adjust, sem))
+		if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust)) {
+			count += adjust;
 			break;
+		}
 		if (count > 0) {
 			raw_spin_unlock_irq(&sem->wait_lock);
 			return sem;
@@ -243,12 +227,14 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout)
 	__set_current_state(TASK_RUNNING);
 
 	if (!timeout) {
-		/* lock timed out but check if this task was just
+		/*
+		 * Lock timed out but check if this task was just
 		 * granted lock ownership - if so, pretend there
-		 * was no timeout; otherwise, cleanup lock wait */
+		 * was no timeout; otherwise, cleanup lock wait.
+		 */
 		raw_spin_lock_irq(&sem->wait_lock);
 		if (waiter.task) {
-			ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+			atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count);
 			list_del(&waiter.list);
 			raw_spin_unlock_irq(&sem->wait_lock);
 			put_task_struct(waiter.task);
@@ -273,11 +259,13 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout)
 	/* set up my own style of waitqueue */
 	raw_spin_lock_irq(&sem->wait_lock);
 
-	/* Try to reverse the lock attempt but if the count has changed
+	/*
+	 * Try to reverse the lock attempt but if the count has changed
 	 * so that reversing fails, check if the lock is now owned,
-	 * and early-out if so */
+	 * and early-out if so.
+	 */
 	do {
-		if (ldsem_cmpxchg(&count, count + adjust, sem))
+		if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust))
 			break;
 		if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) {
 			raw_spin_unlock_irq(&sem->wait_lock);
@@ -303,7 +291,7 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout)
 	}
 
 	if (!locked)
-		ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+		atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count);
 	list_del(&waiter.list);
 	raw_spin_unlock_irq(&sem->wait_lock);
 
@@ -324,7 +312,7 @@ static int __ldsem_down_read_nested(struct ld_semaphore *sem,
 
 	lockdep_acquire_read(sem, subclass, 0, _RET_IP_);
 
-	count = ldsem_atomic_update(LDSEM_READ_BIAS, sem);
+	count = atomic_long_add_return(LDSEM_READ_BIAS, &sem->count);
 	if (count <= 0) {
 		lock_stat(sem, contended);
 		if (!down_read_failed(sem, count, timeout)) {
@@ -343,7 +331,7 @@ static int __ldsem_down_write_nested(struct ld_semaphore *sem,
 
 	lockdep_acquire(sem, subclass, 0, _RET_IP_);
 
-	count = ldsem_atomic_update(LDSEM_WRITE_BIAS, sem);
+	count = atomic_long_add_return(LDSEM_WRITE_BIAS, &sem->count);
 	if ((count & LDSEM_ACTIVE_MASK) != LDSEM_ACTIVE_BIAS) {
 		lock_stat(sem, contended);
 		if (!down_write_failed(sem, count, timeout)) {
@@ -370,10 +358,10 @@ int __sched ldsem_down_read(struct ld_semaphore *sem, long timeout)
  */
 int ldsem_down_read_trylock(struct ld_semaphore *sem)
 {
-	long count = sem->count;
+	long count = atomic_long_read(&sem->count);
 
 	while (count >= 0) {
-		if (ldsem_cmpxchg(&count, count + LDSEM_READ_BIAS, sem)) {
+		if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_READ_BIAS)) {
 			lockdep_acquire_read(sem, 0, 1, _RET_IP_);
 			lock_stat(sem, acquired);
 			return 1;
@@ -396,10 +384,10 @@ int __sched ldsem_down_write(struct ld_semaphore *sem, long timeout)
  */
 int ldsem_down_write_trylock(struct ld_semaphore *sem)
 {
-	long count = sem->count;
+	long count = atomic_long_read(&sem->count);
 
 	while ((count & LDSEM_ACTIVE_MASK) == 0) {
-		if (ldsem_cmpxchg(&count, count + LDSEM_WRITE_BIAS, sem)) {
+		if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_WRITE_BIAS)) {
 			lockdep_acquire(sem, 0, 1, _RET_IP_);
 			lock_stat(sem, acquired);
 			return 1;
@@ -417,7 +405,7 @@ void ldsem_up_read(struct ld_semaphore *sem)
 
 	lockdep_release(sem, 1, _RET_IP_);
 
-	count = ldsem_atomic_update(-LDSEM_READ_BIAS, sem);
+	count = atomic_long_add_return(-LDSEM_READ_BIAS, &sem->count);
 	if (count < 0 && (count & LDSEM_ACTIVE_MASK) == 0)
 		ldsem_wake(sem);
 }
@@ -431,7 +419,7 @@ void ldsem_up_write(struct ld_semaphore *sem)
 
 	lockdep_release(sem, 1, _RET_IP_);
 
-	count = ldsem_atomic_update(-LDSEM_WRITE_BIAS, sem);
+	count = atomic_long_add_return(-LDSEM_WRITE_BIAS, &sem->count);
 	if (count < 0)
 		ldsem_wake(sem);
 }
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index de31062..88312c6 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -690,7 +690,35 @@ static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag)
  */
 static void k_dead(struct vc_data *vc, unsigned char value, char up_flag)
 {
-	static const unsigned char ret_diacr[NR_DEAD] = {'`', '\'', '^', '~', '"', ',' };
+	static const unsigned char ret_diacr[NR_DEAD] = {
+		'`',	/* dead_grave */
+		'\'',	/* dead_acute */
+		'^',	/* dead_circumflex */
+		'~',	/* dead_tilda */
+		'"',	/* dead_diaeresis */
+		',',	/* dead_cedilla */
+		'_',	/* dead_macron */
+		'U',	/* dead_breve */
+		'.',	/* dead_abovedot */
+		'*',	/* dead_abovering */
+		'=',	/* dead_doubleacute */
+		'c',	/* dead_caron */
+		'k',	/* dead_ogonek */
+		'i',	/* dead_iota */
+		'#',	/* dead_voiced_sound */
+		'o',	/* dead_semivoiced_sound */
+		'!',	/* dead_belowdot */
+		'?',	/* dead_hook */
+		'+',	/* dead_horn */
+		'-',	/* dead_stroke */
+		')',	/* dead_abovecomma */
+		'(',	/* dead_abovereversedcomma */
+		':',	/* dead_doublegrave */
+		'n',	/* dead_invertedbreve */
+		';',	/* dead_belowcomma */
+		'$',	/* dead_currency */
+		'@',	/* dead_greek */
+	};
 
 	k_deadunicode(vc, ret_diacr[value], up_flag);
 }
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 90ea1cc..07496c7 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -57,11 +57,13 @@ static inline void highlight_pointer(const int where)
 	complement_pos(sel_cons, where);
 }
 
-static u16
+static u32
 sel_pos(int n)
 {
+	if (use_unicode)
+		return screen_glyph_unicode(sel_cons, n / 2);
 	return inverse_translate(sel_cons, screen_glyph(sel_cons, n),
-				use_unicode);
+				0);
 }
 
 /**
@@ -90,7 +92,8 @@ static u32 inwordLut[]={
   0x07FFFFFE, /* lowercase         */
 };
 
-static inline int inword(const u16 c) {
+static inline int inword(const u32 c)
+{
 	return c > 0x7f || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
 }
 
@@ -116,14 +119,8 @@ static inline int atedge(const int p, int size_row)
 	return (!(p % size_row)	|| !((p + 2) % size_row));
 }
 
-/* constrain v such that v <= u */
-static inline unsigned short limit(const unsigned short v, const unsigned short u)
-{
-	return (v > u) ? u : v;
-}
-
-/* stores the char in UTF8 and returns the number of bytes used (1-3) */
-static int store_utf8(u16 c, char *p)
+/* stores the char in UTF8 and returns the number of bytes used (1-4) */
+static int store_utf8(u32 c, char *p)
 {
 	if (c < 0x80) {
 		/*  0******* */
@@ -134,13 +131,26 @@ static int store_utf8(u16 c, char *p)
 		p[0] = 0xc0 | (c >> 6);
 		p[1] = 0x80 | (c & 0x3f);
 		return 2;
-    	} else {
+	} else if (c < 0x10000) {
 		/* 1110**** 10****** 10****** */
 		p[0] = 0xe0 | (c >> 12);
 		p[1] = 0x80 | ((c >> 6) & 0x3f);
 		p[2] = 0x80 | (c & 0x3f);
 		return 3;
-    	}
+	} else if (c < 0x110000) {
+		/* 11110*** 10****** 10****** 10****** */
+		p[0] = 0xf0 | (c >> 18);
+		p[1] = 0x80 | ((c >> 12) & 0x3f);
+		p[2] = 0x80 | ((c >> 6) & 0x3f);
+		p[3] = 0x80 | (c & 0x3f);
+		return 4;
+	} else {
+		/* outside Unicode, replace with U+FFFD */
+		p[0] = 0xef;
+		p[1] = 0xbf;
+		p[2] = 0xbd;
+		return 3;
+	}
 }
 
 /**
@@ -160,17 +170,17 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
 	struct tiocl_selection v;
 	char *bp, *obp;
 	int i, ps, pe, multiplier;
-	u16 c;
+	u32 c;
 	int mode;
 
 	poke_blanked_console();
 	if (copy_from_user(&v, sel, sizeof(*sel)))
 		return -EFAULT;
 
-	v.xs = limit(v.xs - 1, vc->vc_cols - 1);
-	v.ys = limit(v.ys - 1, vc->vc_rows - 1);
-	v.xe = limit(v.xe - 1, vc->vc_cols - 1);
-	v.ye = limit(v.ye - 1, vc->vc_rows - 1);
+	v.xs = min_t(u16, v.xs - 1, vc->vc_cols - 1);
+	v.ys = min_t(u16, v.ys - 1, vc->vc_rows - 1);
+	v.xe = min_t(u16, v.xe - 1, vc->vc_cols - 1);
+	v.ye = min_t(u16, v.ye - 1, vc->vc_rows - 1);
 	ps = v.ys * vc->vc_size_row + (v.xs << 1);
 	pe = v.ye * vc->vc_size_row + (v.xe << 1);
 
@@ -279,7 +289,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
 	sel_end = new_sel_end;
 
 	/* Allocate a new buffer before freeing the old one ... */
-	multiplier = use_unicode ? 3 : 1;  /* chars can take up to 3 bytes */
+	multiplier = use_unicode ? 4 : 1;  /* chars can take up to 4 bytes */
 	bp = kmalloc_array((sel_end - sel_start) / 2 + 1, multiplier,
 			   GFP_KERNEL);
 	if (!bp) {
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index e4a66e1..2384ea8 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -10,6 +10,12 @@
  *	Attribute/character pair is in native endianity.
  *            [minor: N+128]
  *
+ * /dev/vcsuN: similar to /dev/vcsaN but using 4-byte unicode values
+ *	instead of 1-byte screen glyph values.
+ *            [minor: N+64]
+ *
+ * /dev/vcsuaN: same idea as /dev/vcsaN for unicode (not yet implemented).
+ *
  * This replaces screendump and part of selection, so that the system
  * administrator can control access using file system permissions.
  *
@@ -51,6 +57,26 @@
 
 #define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE)
 
+/*
+ * Our minor space:
+ *
+ *   0 ... 63	glyph mode without attributes
+ *  64 ... 127	unicode mode without attributes
+ * 128 ... 191	glyph mode with attributes
+ * 192 ... 255	unused (reserved for unicode with attributes)
+ *
+ * This relies on MAX_NR_CONSOLES being  <= 63, meaning 63 actual consoles
+ * with minors 0, 64, 128 and 192 being proxies for the foreground console.
+ */
+#if MAX_NR_CONSOLES > 63
+#warning "/dev/vcs* devices may not accommodate more than 63 consoles"
+#endif
+
+#define console(inode)		(iminor(inode) & 63)
+#define use_unicode(inode)	(iminor(inode) & 64)
+#define use_attributes(inode)	(iminor(inode) & 128)
+
+
 struct vcs_poll_data {
 	struct notifier_block notifier;
 	unsigned int cons_num;
@@ -102,7 +128,7 @@ vcs_poll_data_get(struct file *file)
 	poll = kzalloc(sizeof(*poll), GFP_KERNEL);
 	if (!poll)
 		return NULL;
-	poll->cons_num = iminor(file_inode(file)) & 127;
+	poll->cons_num = console(file_inode(file));
 	init_waitqueue_head(&poll->waitq);
 	poll->notifier.notifier_call = vcs_notifier;
 	if (register_vt_notifier(&poll->notifier) != 0) {
@@ -140,7 +166,7 @@ vcs_poll_data_get(struct file *file)
 static struct vc_data*
 vcs_vc(struct inode *inode, int *viewed)
 {
-	unsigned int currcons = iminor(inode) & 127;
+	unsigned int currcons = console(inode);
 
 	WARN_CONSOLE_UNLOCKED();
 
@@ -164,7 +190,6 @@ static int
 vcs_size(struct inode *inode)
 {
 	int size;
-	int minor = iminor(inode);
 	struct vc_data *vc;
 
 	WARN_CONSOLE_UNLOCKED();
@@ -175,8 +200,12 @@ vcs_size(struct inode *inode)
 
 	size = vc->vc_rows * vc->vc_cols;
 
-	if (minor & 128)
+	if (use_attributes(inode)) {
+		if (use_unicode(inode))
+			return -EOPNOTSUPP;
 		size = 2*size + HEADER_SIZE;
+	} else if (use_unicode(inode))
+		size *= 4;
 	return size;
 }
 
@@ -197,12 +226,10 @@ static ssize_t
 vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 {
 	struct inode *inode = file_inode(file);
-	unsigned int currcons = iminor(inode);
 	struct vc_data *vc;
 	struct vcs_poll_data *poll;
-	long pos;
-	long attr, read;
-	int col, maxcol, viewed;
+	long pos, read;
+	int attr, uni_mode, row, col, maxcol, viewed;
 	unsigned short *org = NULL;
 	ssize_t ret;
 	char *con_buf;
@@ -218,7 +245,8 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	 */
 	console_lock();
 
-	attr = (currcons & 128);
+	uni_mode = use_unicode(inode);
+	attr = use_attributes(inode);
 	ret = -ENXIO;
 	vc = vcs_vc(inode, &viewed);
 	if (!vc)
@@ -227,6 +255,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	ret = -EINVAL;
 	if (pos < 0)
 		goto unlock_out;
+	/* we enforce 32-bit alignment for pos and count in unicode mode */
+	if (uni_mode && (pos | count) & 3)
+		goto unlock_out;
+
 	poll = file->private_data;
 	if (count && poll)
 		poll->seen_last_update = true;
@@ -266,7 +298,28 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 		con_buf_start = con_buf0 = con_buf;
 		orig_count = this_round;
 		maxcol = vc->vc_cols;
-		if (!attr) {
+		if (uni_mode) {
+			unsigned int nr;
+
+			ret = vc_uniscr_check(vc);
+			if (ret)
+				break;
+			p /= 4;
+			row = p / vc->vc_cols;
+			col = p % maxcol;
+			nr = maxcol - col;
+			do {
+				if (nr > this_round/4)
+					nr = this_round/4;
+				vc_uniscr_copy_line(vc, con_buf0, viewed,
+						    row, col, nr);
+				con_buf0 += nr * 4;
+				this_round -= nr * 4;
+				row++;
+				col = 0;
+				nr = maxcol;
+			} while (this_round);
+		} else if (!attr) {
 			org = screen_pos(vc, p, viewed);
 			col = p % maxcol;
 			p += maxcol - col;
@@ -375,7 +428,6 @@ static ssize_t
 vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 {
 	struct inode *inode = file_inode(file);
-	unsigned int currcons = iminor(inode);
 	struct vc_data *vc;
 	long pos;
 	long attr, size, written;
@@ -396,7 +448,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	 */
 	console_lock();
 
-	attr = (currcons & 128);
+	attr = use_attributes(inode);
 	ret = -ENXIO;
 	vc = vcs_vc(inode, &viewed);
 	if (!vc)
@@ -593,9 +645,15 @@ vcs_fasync(int fd, struct file *file, int on)
 static int
 vcs_open(struct inode *inode, struct file *filp)
 {
-	unsigned int currcons = iminor(inode) & 127;
+	unsigned int currcons = console(inode);
+	bool attr = use_attributes(inode);
+	bool uni_mode = use_unicode(inode);
 	int ret = 0;
-	
+
+	/* we currently don't support attributes in unicode mode */
+	if (attr && uni_mode)
+		return -EOPNOTSUPP;
+
 	console_lock();
 	if(currcons && !vc_cons_allocated(currcons-1))
 		ret = -ENXIO;
@@ -628,6 +686,8 @@ void vcs_make_sysfs(int index)
 {
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 1), NULL,
 		      "vcs%u", index + 1);
+	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 65), NULL,
+		      "vcsu%u", index + 1);
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 129), NULL,
 		      "vcsa%u", index + 1);
 }
@@ -635,6 +695,7 @@ void vcs_make_sysfs(int index)
 void vcs_remove_sysfs(int index)
 {
 	device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 1));
+	device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 65));
 	device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 129));
 }
 
@@ -647,6 +708,7 @@ int __init vcs_init(void)
 	vc_class = class_create(THIS_MODULE, "vc");
 
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
+	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 64), NULL, "vcsu");
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
 	for (i = 0; i < MIN_NR_CONSOLES; i++)
 		vcs_make_sysfs(i);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 15eb6c8..5f1183b 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -104,6 +104,7 @@
 #include <linux/kdb.h>
 #include <linux/ctype.h>
 #include <linux/bsearch.h>
+#include <linux/gcd.h>
 
 #define MAX_NR_CON_DRIVER 16
 
@@ -317,6 +318,306 @@ void schedule_console_callback(void)
 	schedule_work(&console_work);
 }
 
+/*
+ * Code to manage unicode-based screen buffers
+ */
+
+#ifdef NO_VC_UNI_SCREEN
+/* this disables and optimizes related code away at compile time */
+#define get_vc_uniscr(vc) NULL
+#else
+#define get_vc_uniscr(vc) vc->vc_uni_screen
+#endif
+
+#define VC_UNI_SCREEN_DEBUG 0
+
+typedef uint32_t char32_t;
+
+/*
+ * Our screen buffer is preceded by an array of line pointers so that
+ * scrolling only implies some pointer shuffling.
+ */
+struct uni_screen {
+	char32_t *lines[0];
+};
+
+static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows)
+{
+	struct uni_screen *uniscr;
+	void *p;
+	unsigned int memsize, i;
+
+	/* allocate everything in one go */
+	memsize = cols * rows * sizeof(char32_t);
+	memsize += rows * sizeof(char32_t *);
+	p = kmalloc(memsize, GFP_KERNEL);
+	if (!p)
+		return NULL;
+
+	/* initial line pointers */
+	uniscr = p;
+	p = uniscr->lines + rows;
+	for (i = 0; i < rows; i++) {
+		uniscr->lines[i] = p;
+		p += cols * sizeof(char32_t);
+	}
+	return uniscr;
+}
+
+static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr)
+{
+	kfree(vc->vc_uni_screen);
+	vc->vc_uni_screen = new_uniscr;
+}
+
+static void vc_uniscr_putc(struct vc_data *vc, char32_t uc)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+	if (uniscr)
+		uniscr->lines[vc->vc_y][vc->vc_x] = uc;
+}
+
+static void vc_uniscr_insert(struct vc_data *vc, unsigned int nr)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+	if (uniscr) {
+		char32_t *ln = uniscr->lines[vc->vc_y];
+		unsigned int x = vc->vc_x, cols = vc->vc_cols;
+
+		memmove(&ln[x + nr], &ln[x], (cols - x - nr) * sizeof(*ln));
+		memset32(&ln[x], ' ', nr);
+	}
+}
+
+static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+	if (uniscr) {
+		char32_t *ln = uniscr->lines[vc->vc_y];
+		unsigned int x = vc->vc_x, cols = vc->vc_cols;
+
+		memcpy(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln));
+		memset32(&ln[cols - nr], ' ', nr);
+	}
+}
+
+static void vc_uniscr_clear_line(struct vc_data *vc, unsigned int x,
+				 unsigned int nr)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+	if (uniscr) {
+		char32_t *ln = uniscr->lines[vc->vc_y];
+
+		memset32(&ln[x], ' ', nr);
+	}
+}
+
+static void vc_uniscr_clear_lines(struct vc_data *vc, unsigned int y,
+				  unsigned int nr)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+	if (uniscr) {
+		unsigned int cols = vc->vc_cols;
+
+		while (nr--)
+			memset32(uniscr->lines[y++], ' ', cols);
+	}
+}
+
+static void vc_uniscr_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+			     enum con_scroll dir, unsigned int nr)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+	if (uniscr) {
+		unsigned int i, j, k, sz, d, clear;
+
+		sz = b - t;
+		clear = b - nr;
+		d = nr;
+		if (dir == SM_DOWN) {
+			clear = t;
+			d = sz - nr;
+		}
+		for (i = 0; i < gcd(d, sz); i++) {
+			char32_t *tmp = uniscr->lines[t + i];
+			j = i;
+			while (1) {
+				k = j + d;
+				if (k >= sz)
+					k -= sz;
+				if (k == i)
+					break;
+				uniscr->lines[t + j] = uniscr->lines[t + k];
+				j = k;
+			}
+			uniscr->lines[t + j] = tmp;
+		}
+		vc_uniscr_clear_lines(vc, clear, nr);
+	}
+}
+
+static void vc_uniscr_copy_area(struct uni_screen *dst,
+				unsigned int dst_cols,
+				unsigned int dst_rows,
+				struct uni_screen *src,
+				unsigned int src_cols,
+				unsigned int src_top_row,
+				unsigned int src_bot_row)
+{
+	unsigned int dst_row = 0;
+
+	if (!dst)
+		return;
+
+	while (src_top_row < src_bot_row) {
+		char32_t *src_line = src->lines[src_top_row];
+		char32_t *dst_line = dst->lines[dst_row];
+
+		memcpy(dst_line, src_line, src_cols * sizeof(char32_t));
+		if (dst_cols - src_cols)
+			memset32(dst_line + src_cols, ' ', dst_cols - src_cols);
+		src_top_row++;
+		dst_row++;
+	}
+	while (dst_row < dst_rows) {
+		char32_t *dst_line = dst->lines[dst_row];
+
+		memset32(dst_line, ' ', dst_cols);
+		dst_row++;
+	}
+}
+
+/*
+ * Called from vcs_read() to make sure unicode screen retrieval is possible.
+ * This will initialize the unicode screen buffer if not already done.
+ * This returns 0 if OK, or a negative error code otherwise.
+ * In particular, -ENODATA is returned if the console is not in UTF-8 mode.
+ */
+int vc_uniscr_check(struct vc_data *vc)
+{
+	struct uni_screen *uniscr;
+	unsigned short *p;
+	int x, y, mask;
+
+	if (__is_defined(NO_VC_UNI_SCREEN))
+		return -EOPNOTSUPP;
+
+	WARN_CONSOLE_UNLOCKED();
+
+	if (!vc->vc_utf)
+		return -ENODATA;
+
+	if (vc->vc_uni_screen)
+		return 0;
+
+	uniscr = vc_uniscr_alloc(vc->vc_cols, vc->vc_rows);
+	if (!uniscr)
+		return -ENOMEM;
+
+	/*
+	 * Let's populate it initially with (imperfect) reverse translation.
+	 * This is the next best thing we can do short of having it enabled
+	 * from the start even when no users rely on this functionality. True
+	 * unicode content will be available after a complete screen refresh.
+	 */
+	p = (unsigned short *)vc->vc_origin;
+	mask = vc->vc_hi_font_mask | 0xff;
+	for (y = 0; y < vc->vc_rows; y++) {
+		char32_t *line = uniscr->lines[y];
+		for (x = 0; x < vc->vc_cols; x++) {
+			u16 glyph = scr_readw(p++) & mask;
+			line[x] = inverse_translate(vc, glyph, true);
+		}
+	}
+
+	vc->vc_uni_screen = uniscr;
+	return 0;
+}
+
+/*
+ * Called from vcs_read() to get the unicode data from the screen.
+ * This must be preceded by a successful call to vc_uniscr_check() once
+ * the console lock has been taken.
+ */
+void vc_uniscr_copy_line(struct vc_data *vc, void *dest, int viewed,
+			 unsigned int row, unsigned int col, unsigned int nr)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+	int offset = row * vc->vc_size_row + col * 2;
+	unsigned long pos;
+
+	BUG_ON(!uniscr);
+
+	pos = (unsigned long)screenpos(vc, offset, viewed);
+	if (pos >= vc->vc_origin && pos < vc->vc_scr_end) {
+		/*
+		 * Desired position falls in the main screen buffer.
+		 * However the actual row/col might be different if
+		 * scrollback is active.
+		 */
+		row = (pos - vc->vc_origin) / vc->vc_size_row;
+		col = ((pos - vc->vc_origin) % vc->vc_size_row) / 2;
+		memcpy(dest, &uniscr->lines[row][col], nr * sizeof(char32_t));
+	} else {
+		/*
+		 * Scrollback is active. For now let's simply backtranslate
+		 * the screen glyphs until the unicode screen buffer does
+		 * synchronize with console display drivers for a scrollback
+		 * buffer of its own.
+		 */
+		u16 *p = (u16 *)pos;
+		int mask = vc->vc_hi_font_mask | 0xff;
+		char32_t *uni_buf = dest;
+		while (nr--) {
+			u16 glyph = scr_readw(p++) & mask;
+			*uni_buf++ = inverse_translate(vc, glyph, true);
+		}
+	}
+}
+
+/* this is for validation and debugging only */
+static void vc_uniscr_debug_check(struct vc_data *vc)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+	unsigned short *p;
+	int x, y, mask;
+
+	if (!VC_UNI_SCREEN_DEBUG || !uniscr)
+		return;
+
+	WARN_CONSOLE_UNLOCKED();
+
+	/*
+	 * Make sure our unicode screen translates into the same glyphs
+	 * as the actual screen. This is brutal indeed.
+	 */
+	p = (unsigned short *)vc->vc_origin;
+	mask = vc->vc_hi_font_mask | 0xff;
+	for (y = 0; y < vc->vc_rows; y++) {
+		char32_t *line = uniscr->lines[y];
+		for (x = 0; x < vc->vc_cols; x++) {
+			u16 glyph = scr_readw(p++) & mask;
+			char32_t uc = line[x];
+			int tc = conv_uni_to_pc(vc, uc);
+			if (tc == -4)
+				tc = conv_uni_to_pc(vc, 0xfffd);
+			if (tc == -4)
+				tc = conv_uni_to_pc(vc, '?');
+			if (tc != glyph)
+				pr_err_ratelimited(
+					"%s: mismatch at %d,%d: glyph=%#x tc=%#x\n",
+					__func__, x, y, glyph, tc);
+		}
+	}
+}
+
+
 static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
 		enum con_scroll dir, unsigned int nr)
 {
@@ -326,6 +627,7 @@ static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
 		nr = b - t - 1;
 	if (b > vc->vc_rows || t >= b || nr < 1)
 		return;
+	vc_uniscr_scroll(vc, t, b, dir, nr);
 	if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, dir, nr))
 		return;
 
@@ -533,6 +835,7 @@ static void insert_char(struct vc_data *vc, unsigned int nr)
 {
 	unsigned short *p = (unsigned short *) vc->vc_pos;
 
+	vc_uniscr_insert(vc, nr);
 	scr_memmovew(p + nr, p, (vc->vc_cols - vc->vc_x - nr) * 2);
 	scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
 	vc->vc_need_wrap = 0;
@@ -545,6 +848,7 @@ static void delete_char(struct vc_data *vc, unsigned int nr)
 {
 	unsigned short *p = (unsigned short *) vc->vc_pos;
 
+	vc_uniscr_delete(vc, nr);
 	scr_memcpyw(p, p + nr, (vc->vc_cols - vc->vc_x - nr) * 2);
 	scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char,
 			nr * 2);
@@ -845,10 +1149,11 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 {
 	unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
 	unsigned long end;
-	unsigned int old_rows, old_row_size;
+	unsigned int old_rows, old_row_size, first_copied_row;
 	unsigned int new_cols, new_rows, new_row_size, new_screen_size;
 	unsigned int user;
 	unsigned short *newscreen;
+	struct uni_screen *new_uniscr = NULL;
 
 	WARN_CONSOLE_UNLOCKED();
 
@@ -875,6 +1180,14 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	if (!newscreen)
 		return -ENOMEM;
 
+	if (get_vc_uniscr(vc)) {
+		new_uniscr = vc_uniscr_alloc(new_cols, new_rows);
+		if (!new_uniscr) {
+			kfree(newscreen);
+			return -ENOMEM;
+		}
+	}
+
 	if (vc == sel_cons)
 		clear_selection();
 
@@ -884,6 +1197,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	err = resize_screen(vc, new_cols, new_rows, user);
 	if (err) {
 		kfree(newscreen);
+		kfree(new_uniscr);
 		return err;
 	}
 
@@ -904,18 +1218,24 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 			 * Cursor near the bottom, copy contents from the
 			 * bottom of buffer
 			 */
-			old_origin += (old_rows - new_rows) * old_row_size;
+			first_copied_row = (old_rows - new_rows);
 		} else {
 			/*
 			 * Cursor is in no man's land, copy 1/2 screenful
 			 * from the top and bottom of cursor position
 			 */
-			old_origin += (vc->vc_y - new_rows/2) * old_row_size;
+			first_copied_row = (vc->vc_y - new_rows/2);
 		}
-	}
-
+		old_origin += first_copied_row * old_row_size;
+	} else
+		first_copied_row = 0;
 	end = old_origin + old_row_size * min(old_rows, new_rows);
 
+	vc_uniscr_copy_area(new_uniscr, new_cols, new_rows,
+			    get_vc_uniscr(vc), rlth/2, first_copied_row,
+			    min(old_rows, new_rows));
+	vc_uniscr_set(vc, new_uniscr);
+
 	update_attr(vc);
 
 	while (old_origin < end) {
@@ -1013,6 +1333,7 @@ struct vc_data *vc_deallocate(unsigned int currcons)
 		vc->vc_sw->con_deinit(vc);
 		put_pid(vc->vt_pid);
 		module_put(vc->vc_sw->owner);
+		vc_uniscr_set(vc, NULL);
 		kfree(vc->vc_screenbuf);
 		vc_cons[currcons].d = NULL;
 	}
@@ -1171,15 +1492,22 @@ static void csi_J(struct vc_data *vc, int vpar)
 
 	switch (vpar) {
 		case 0:	/* erase from cursor to end of display */
+			vc_uniscr_clear_line(vc, vc->vc_x,
+					     vc->vc_cols - vc->vc_x);
+			vc_uniscr_clear_lines(vc, vc->vc_y + 1,
+					      vc->vc_rows - vc->vc_y - 1);
 			count = (vc->vc_scr_end - vc->vc_pos) >> 1;
 			start = (unsigned short *)vc->vc_pos;
 			break;
 		case 1:	/* erase from start to cursor */
+			vc_uniscr_clear_line(vc, 0, vc->vc_x + 1);
+			vc_uniscr_clear_lines(vc, 0, vc->vc_y);
 			count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
 			start = (unsigned short *)vc->vc_origin;
 			break;
 		case 2: /* erase whole display */
 		case 3: /* (and scrollback buffer later) */
+			vc_uniscr_clear_lines(vc, 0, vc->vc_rows);
 			count = vc->vc_cols * vc->vc_rows;
 			start = (unsigned short *)vc->vc_origin;
 			break;
@@ -1200,25 +1528,27 @@ static void csi_J(struct vc_data *vc, int vpar)
 static void csi_K(struct vc_data *vc, int vpar)
 {
 	unsigned int count;
-	unsigned short * start;
+	unsigned short *start = (unsigned short *)vc->vc_pos;
+	int offset;
 
 	switch (vpar) {
 		case 0:	/* erase from cursor to end of line */
+			offset = 0;
 			count = vc->vc_cols - vc->vc_x;
-			start = (unsigned short *)vc->vc_pos;
 			break;
 		case 1:	/* erase from start of line to cursor */
-			start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
+			offset = -vc->vc_x;
 			count = vc->vc_x + 1;
 			break;
 		case 2: /* erase whole line */
-			start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
+			offset = -vc->vc_x;
 			count = vc->vc_cols;
 			break;
 		default:
 			return;
 	}
-	scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
+	vc_uniscr_clear_line(vc, vc->vc_x + offset, count);
+	scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count);
 	vc->vc_need_wrap = 0;
 	if (con_should_update(vc))
 		do_update_region(vc, (unsigned long) start, count);
@@ -1232,6 +1562,7 @@ static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar posi
 		vpar++;
 	count = (vpar > vc->vc_cols - vc->vc_x) ? (vc->vc_cols - vc->vc_x) : vpar;
 
+	vc_uniscr_clear_line(vc, vc->vc_x, count);
 	scr_memsetw((unsigned short *)vc->vc_pos, vc->vc_video_erase_char, 2 * count);
 	if (con_should_update(vc))
 		vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1, count);
@@ -2188,7 +2519,7 @@ static void con_flush(struct vc_data *vc, unsigned long draw_from,
 /* acquires console_lock */
 static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int count)
 {
-	int c, tc, ok, n = 0, draw_x = -1;
+	int c, next_c, tc, ok, n = 0, draw_x = -1;
 	unsigned int currcons;
 	unsigned long draw_from = 0, draw_to = 0;
 	struct vc_data *vc;
@@ -2382,6 +2713,7 @@ rescan_last_byte:
 				con_flush(vc, draw_from, draw_to, &draw_x);
 			}
 
+			next_c = c;
 			while (1) {
 				if (vc->vc_need_wrap || vc->vc_decim)
 					con_flush(vc, draw_from, draw_to,
@@ -2392,6 +2724,7 @@ rescan_last_byte:
 				}
 				if (vc->vc_decim)
 					insert_char(vc, 1);
+				vc_uniscr_putc(vc, next_c);
 				scr_writew(himask ?
 					     ((vc_attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) :
 					     (vc_attr << 8) + tc,
@@ -2412,6 +2745,7 @@ rescan_last_byte:
 
 				tc = conv_uni_to_pc(vc, ' '); /* A space is printed in the second column */
 				if (tc < 0) tc = ' ';
+				next_c = ' ';
 			}
 			notify_write(vc, c);
 
@@ -2431,6 +2765,7 @@ rescan_last_byte:
 		do_con_trol(tty, vc, orig);
 	}
 	con_flush(vc, draw_from, draw_to, &draw_x);
+	vc_uniscr_debug_check(vc);
 	console_conditional_schedule();
 	console_unlock();
 	notify_update(vc);
@@ -4257,6 +4592,16 @@ u16 screen_glyph(struct vc_data *vc, int offset)
 }
 EXPORT_SYMBOL_GPL(screen_glyph);
 
+u32 screen_glyph_unicode(struct vc_data *vc, int n)
+{
+	struct uni_screen *uniscr = get_vc_uniscr(vc);
+
+	if (uniscr)
+		return uniscr->lines[n / vc->vc_cols][n % vc->vc_cols];
+	return inverse_translate(vc, screen_glyph(vc, n * 2), 1);
+}
+EXPORT_SYMBOL_GPL(screen_glyph_unicode);
+
 /* used by vcs - note the word offset */
 unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed)
 {