Merge tag 'asoc-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.18

 - More componentisation work from Lars-Peter, this time mainly
   cleaning up the suspend and bias level transition callbacks.
 - Real system support for the Intel drivers and a bunch of fixes and
   enhancements for the associated CODEC drivers, this is going to need
   a lot quirks over time due to the lack of any firmware description of
   the boards.
 - Jack detect support for simple card from Dylan Reid.
 - A bunch of small fixes and enhancements for the Freescale drivers.
 - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32, Everest
   Semiconductor ES8328 and Freescale cards using the ASRC in newer i.MX
   processors.

3 files changed, 44 insertions, 2 deletions

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 4db7987..57d9df8 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -540,6 +540,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "INT3434", 0 },
 	{ "INT3435", 0 },
 	{ "80860F0A", 0 },
+	{ "8086228A", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 7b63677..d7d4584 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -527,6 +527,45 @@ static void atmel_enable_ms(struct uart_port *port)
 }
 
 /*
+ * Disable modem status interrupts
+ */
+static void atmel_disable_ms(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	uint32_t idr = 0;
+
+	/*
+	 * Interrupt should not be disabled twice
+	 */
+	if (!atmel_port->ms_irq_enabled)
+		return;
+
+	atmel_port->ms_irq_enabled = false;
+
+	if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+	else
+		idr |= ATMEL_US_CTSIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+	else
+		idr |= ATMEL_US_DSRIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+	else
+		idr |= ATMEL_US_RIIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+		disable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+	else
+		idr |= ATMEL_US_DCDIC;
+
+	UART_PUT_IDR(port, idr);
+}
+
+/*
  * Control the transmission of a break signal
  */
 static void atmel_break_ctl(struct uart_port *port, int break_state)
@@ -1993,7 +2032,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* CTS flow-control and modem-status interrupts */
 	if (UART_ENABLE_MS(port, termios->c_cflag))
-		port->ops->enable_ms(port);
+		atmel_enable_ms(port);
+	else
+		atmel_disable_ms(port);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 01951d2..806e4bc 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -581,7 +581,7 @@ static unsigned int cdns_uart_tx_empty(struct uart_port *port)
 {
 	unsigned int status;
 
-	status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY;
+	status = cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY;
 	return status ? TIOCSER_TEMT : 0;
 }