summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2012-05-23 21:18:46 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-06-12 15:41:44 -0700
commit78d80c5a720ea370defa3e3124c0f7f7179bdfe5 (patch)
tree79821058633366fa9bca66038439dde67673680b /drivers/tty
parentf109293f5889dd30477564a3ce2c901f4024a53e (diff)
downloadop-kernel-dev-78d80c5a720ea370defa3e3124c0f7f7179bdfe5.zip
op-kernel-dev-78d80c5a720ea370defa3e3124c0f7f7179bdfe5.tar.gz
serial/amba-pl011: move custom pin control to driver
We had a boot regression in Ux500 in the merge window because two orthogonal pin control schemes for the PL011 were merged at the same time: - One using the .init() and .exit() hooks into the platform for Ux500 putting the pins into default vs sleep state respectively as the port was started/stopped. commit a09806607fd20bed2f8c41fe22793386790a14aa "ARM: ux500: switch to using pinctrl for uart0" - One hogging the default setting at PL011 probe() commit 258e055111d3cde2607e0d04eb91da2f7a59b591 "serial: amba-pl011: adopt pinctrl support" To get a solution that works for both let's scrap the stuff in the platform callbacks, instead have the driver itself select default and sleep states when the port is started/stopped. Hopefully this works for all clients. Platform callbacks are bad for device tree migration anyway, so this rids us of another problem in Ux500. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/amba-pl011.c45
1 files changed, 41 insertions, 4 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4ad721f..c17923e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -133,6 +133,10 @@ struct pl011_dmatx_data {
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
+ /* Two optional pin states - default & sleep */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_sleep;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
unsigned int im; /* interrupt mask */
@@ -1312,6 +1316,14 @@ static int pl011_startup(struct uart_port *port)
unsigned int cr;
int retval;
+ /* Optionaly enable pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (retval)
+ dev_err(port->dev,
+ "could not set default pins\n");
+ }
+
retval = clk_prepare(uap->clk);
if (retval)
goto out;
@@ -1420,6 +1432,7 @@ static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
+ int retval;
/*
* disable all interrupts
@@ -1462,6 +1475,14 @@ static void pl011_shutdown(struct uart_port *port)
*/
clk_disable(uap->clk);
clk_unprepare(uap->clk);
+ /* Optionally let pins go into sleep states */
+ if (!IS_ERR(uap->pins_sleep)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
+ if (retval)
+ dev_err(port->dev,
+ "could not set pins to sleep state\n");
+ }
+
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
@@ -1792,6 +1813,14 @@ static int __init pl011_console_setup(struct console *co, char *options)
if (!uap)
return -ENODEV;
+ /* Allow pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (ret)
+ dev_err(uap->port.dev,
+ "could not set default pins\n");
+ }
+
ret = clk_prepare(uap->clk);
if (ret)
return ret;
@@ -1844,7 +1873,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
- struct pinctrl *pinctrl;
void __iomem *base;
int i, ret;
@@ -1869,11 +1897,20 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
goto free;
}
- pinctrl = devm_pinctrl_get_select_default(&dev->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
+ uap->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(uap->pinctrl)) {
+ ret = PTR_ERR(uap->pinctrl);
goto unmap;
}
+ uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(uap->pins_default))
+ dev_err(&dev->dev, "could not get default pinstate\n");
+
+ uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(uap->pins_sleep))
+ dev_dbg(&dev->dev, "could not get sleep pinstate\n");
uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
OpenPOWER on IntegriCloud