Merge 3.10-rc3 into tty-next

We want these fixes.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

13 files changed, 233 insertions, 206 deletions

diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 6d0c27c..9bffcec 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -859,6 +859,7 @@ error:
  */
 static void __exit ehv_bc_exit(void)
 {
+	platform_driver_unregister(&ehv_bc_tty_driver);
 	tty_unregister_driver(ehv_bc_driver);
 	put_tty_driver(ehv_bc_driver);
 	kfree(bcs);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 71d6eb2..4c4a236 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1618,8 +1618,12 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 				if (ip->type == PORT_16550A)
 					me->fifo[p] = 1;
 
-				opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
-				opmode &= OP_MODE_MASK;
+				if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) {
+					opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
+					opmode &= OP_MODE_MASK;
+				} else {
+					opmode = RS232_MODE;
+				}
 				me->iftype[p] = opmode;
 				mutex_unlock(&port->mutex);
 			}
@@ -1676,6 +1680,9 @@ static int mxser_ioctl(struct tty_struct *tty,
 		int shiftbit;
 		unsigned char val, mask;
 
+		if (info->board->chip_flag != MOXA_MUST_MU860_HWID)
+			return -EFAULT;
+
 		p = tty->index % 4;
 		if (cmd == MOXA_SET_OP_MODE) {
 			if (get_user(opmode, (int __user *) argp))
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 905a6fa..cdcdb0e 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1567,6 +1567,14 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 			ldata->real_raw = 0;
 	}
 	n_tty_set_room(tty);
+	/*
+	 * Fix tty hang when I_IXON(tty) is cleared, but the tty
+	 * been stopped by STOP_CHAR(tty) before it.
+	 */
+	if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
+		start_tty(tty);
+	}
+
 	/* The termios change make the tty ready for I/O */
 	wake_up_interruptible(&tty->write_wait);
 	wake_up_interruptible(&tty->read_wait);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 82d35c5..354564e 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -150,12 +150,14 @@ static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
 	AIOP_INTR_BIT_3
 };
 
+#ifdef CONFIG_PCI
 static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
 	UPCI_AIOP_INTR_BIT_0,
 	UPCI_AIOP_INTR_BIT_1,
 	UPCI_AIOP_INTR_BIT_2,
 	UPCI_AIOP_INTR_BIT_3
 };
+#endif
 
 static Byte_t RData[RDATASIZE] = {
 	0x00, 0x09, 0xf6, 0x82,
@@ -227,7 +229,6 @@ static unsigned long nextLineNumber;
 static int __init init_ISA(int i);
 static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
 static void rp_flush_buffer(struct tty_struct *tty);
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
 static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
 static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
 static void rp_start(struct tty_struct *tty);
@@ -241,11 +242,6 @@ static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
 static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
 static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
 static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
-			      ByteIO_t * AiopIOList, int AiopIOListSize,
-			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
-			      int PeriodicOnly, int altChanRingIndicator,
-			      int UPCIRingInd);
 static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
 			   ByteIO_t * AiopIOList, int AiopIOListSize,
 			   int IRQNum, Byte_t Frequency, int PeriodicOnly);
@@ -1775,6 +1771,145 @@ static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = {
 };
 MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
 
+/*  Resets the speaker controller on RocketModem II and III devices */
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
+{
+	ByteIO_t addr;
+
+	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
+	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
+		addr = CtlP->AiopIO[0] + 0x4F;
+		sOutB(addr, 0);
+	}
+
+	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
+	if ((model == MODEL_UPCI_RM3_8PORT)
+	    || (model == MODEL_UPCI_RM3_4PORT)) {
+		addr = CtlP->AiopIO[0] + 0x88;
+		sOutB(addr, 0);
+	}
+}
+
+/***************************************************************************
+Function: sPCIInitController
+Purpose:  Initialization of controller global registers and controller
+          structure.
+Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
+                          IRQNum,Frequency,PeriodicOnly)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int CtlNum; Controller number
+          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+             This list must be in the order the AIOPs will be found on the
+             controller.  Once an AIOP in the list is not found, it is
+             assumed that there are no more AIOPs on the controller.
+          int AiopIOListSize; Number of addresses in AiopIOList
+          int IRQNum; Interrupt Request number.  Can be any of the following:
+                         0: Disable global interrupts
+                         3: IRQ 3
+                         4: IRQ 4
+                         5: IRQ 5
+                         9: IRQ 9
+                         10: IRQ 10
+                         11: IRQ 11
+                         12: IRQ 12
+                         15: IRQ 15
+          Byte_t Frequency: A flag identifying the frequency
+                   of the periodic interrupt, can be any one of the following:
+                      FREQ_DIS - periodic interrupt disabled
+                      FREQ_137HZ - 137 Hertz
+                      FREQ_69HZ - 69 Hertz
+                      FREQ_34HZ - 34 Hertz
+                      FREQ_17HZ - 17 Hertz
+                      FREQ_9HZ - 9 Hertz
+                      FREQ_4HZ - 4 Hertz
+                   If IRQNum is set to 0 the Frequency parameter is
+                   overidden, it is forced to a value of FREQ_DIS.
+          int PeriodicOnly: 1 if all interrupts except the periodic
+                               interrupt are to be blocked.
+                            0 is both the periodic interrupt and
+                               other channel interrupts are allowed.
+                            If IRQNum is set to 0 the PeriodicOnly parameter is
+                               overidden, it is forced to a value of 0.
+Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
+               initialization failed.
+
+Comments:
+          If periodic interrupts are to be disabled but AIOP interrupts
+          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
+
+          If interrupts are to be completely disabled set IRQNum to 0.
+
+          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
+          invalid combination.
+
+          This function performs initialization of global interrupt modes,
+          but it does not actually enable global interrupts.  To enable
+          and disable global interrupts use functions sEnGlobalInt() and
+          sDisGlobalInt().  Enabling of global interrupts is normally not
+          done until all other initializations are complete.
+
+          Even if interrupts are globally enabled, they must also be
+          individually enabled for each channel that is to generate
+          interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+
+          After this function all AIOPs on the controller are disabled,
+          they can be enabled with sEnAiop().
+*/
+static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
+			      ByteIO_t * AiopIOList, int AiopIOListSize,
+			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
+			      int PeriodicOnly, int altChanRingIndicator,
+			      int UPCIRingInd)
+{
+	int i;
+	ByteIO_t io;
+
+	CtlP->AltChanRingIndicator = altChanRingIndicator;
+	CtlP->UPCIRingInd = UPCIRingInd;
+	CtlP->CtlNum = CtlNum;
+	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
+	CtlP->BusType = isPCI;	/* controller release 1 */
+
+	if (ConfigIO) {
+		CtlP->isUPCI = 1;
+		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
+		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
+		CtlP->AiopIntrBits = upci_aiop_intr_bits;
+	} else {
+		CtlP->isUPCI = 0;
+		CtlP->PCIIO =
+		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
+		CtlP->AiopIntrBits = aiop_intr_bits;
+	}
+
+	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
+	/* Init AIOPs */
+	CtlP->NumAiop = 0;
+	for (i = 0; i < AiopIOListSize; i++) {
+		io = AiopIOList[i];
+		CtlP->AiopIO[i] = (WordIO_t) io;
+		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+
+		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
+		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
+			break;	/* done looking for AIOPs */
+
+		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
+		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
+		sOutB(io + _INDX_DATA, sClockPrescale);
+		CtlP->NumAiop++;	/* bump count of AIOPs */
+	}
+
+	if (CtlP->NumAiop == 0)
+		return (-1);
+	else
+		return (CtlP->NumAiop);
+}
+
 /*
  *  Called when a PCI card is found.  Retrieves and stores model information,
  *  init's aiopic and serial port hardware.
@@ -2519,147 +2654,6 @@ static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
 		return (CtlP->NumAiop);
 }
 
-#ifdef CONFIG_PCI
-/***************************************************************************
-Function: sPCIInitController
-Purpose:  Initialization of controller global registers and controller
-          structure.
-Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
-                          IRQNum,Frequency,PeriodicOnly)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-          int CtlNum; Controller number
-          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
-             This list must be in the order the AIOPs will be found on the
-             controller.  Once an AIOP in the list is not found, it is
-             assumed that there are no more AIOPs on the controller.
-          int AiopIOListSize; Number of addresses in AiopIOList
-          int IRQNum; Interrupt Request number.  Can be any of the following:
-                         0: Disable global interrupts
-                         3: IRQ 3
-                         4: IRQ 4
-                         5: IRQ 5
-                         9: IRQ 9
-                         10: IRQ 10
-                         11: IRQ 11
-                         12: IRQ 12
-                         15: IRQ 15
-          Byte_t Frequency: A flag identifying the frequency
-                   of the periodic interrupt, can be any one of the following:
-                      FREQ_DIS - periodic interrupt disabled
-                      FREQ_137HZ - 137 Hertz
-                      FREQ_69HZ - 69 Hertz
-                      FREQ_34HZ - 34 Hertz
-                      FREQ_17HZ - 17 Hertz
-                      FREQ_9HZ - 9 Hertz
-                      FREQ_4HZ - 4 Hertz
-                   If IRQNum is set to 0 the Frequency parameter is
-                   overidden, it is forced to a value of FREQ_DIS.
-          int PeriodicOnly: 1 if all interrupts except the periodic
-                               interrupt are to be blocked.
-                            0 is both the periodic interrupt and
-                               other channel interrupts are allowed.
-                            If IRQNum is set to 0 the PeriodicOnly parameter is
-                               overidden, it is forced to a value of 0.
-Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
-               initialization failed.
-
-Comments:
-          If periodic interrupts are to be disabled but AIOP interrupts
-          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
-
-          If interrupts are to be completely disabled set IRQNum to 0.
-
-          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
-          invalid combination.
-
-          This function performs initialization of global interrupt modes,
-          but it does not actually enable global interrupts.  To enable
-          and disable global interrupts use functions sEnGlobalInt() and
-          sDisGlobalInt().  Enabling of global interrupts is normally not
-          done until all other initializations are complete.
-
-          Even if interrupts are globally enabled, they must also be
-          individually enabled for each channel that is to generate
-          interrupts.
-
-Warnings: No range checking on any of the parameters is done.
-
-          No context switches are allowed while executing this function.
-
-          After this function all AIOPs on the controller are disabled,
-          they can be enabled with sEnAiop().
-*/
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
-			      ByteIO_t * AiopIOList, int AiopIOListSize,
-			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
-			      int PeriodicOnly, int altChanRingIndicator,
-			      int UPCIRingInd)
-{
-	int i;
-	ByteIO_t io;
-
-	CtlP->AltChanRingIndicator = altChanRingIndicator;
-	CtlP->UPCIRingInd = UPCIRingInd;
-	CtlP->CtlNum = CtlNum;
-	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
-	CtlP->BusType = isPCI;	/* controller release 1 */
-
-	if (ConfigIO) {
-		CtlP->isUPCI = 1;
-		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
-		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
-		CtlP->AiopIntrBits = upci_aiop_intr_bits;
-	} else {
-		CtlP->isUPCI = 0;
-		CtlP->PCIIO =
-		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
-		CtlP->AiopIntrBits = aiop_intr_bits;
-	}
-
-	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
-	/* Init AIOPs */
-	CtlP->NumAiop = 0;
-	for (i = 0; i < AiopIOListSize; i++) {
-		io = AiopIOList[i];
-		CtlP->AiopIO[i] = (WordIO_t) io;
-		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
-
-		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
-		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
-			break;	/* done looking for AIOPs */
-
-		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
-		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
-		sOutB(io + _INDX_DATA, sClockPrescale);
-		CtlP->NumAiop++;	/* bump count of AIOPs */
-	}
-
-	if (CtlP->NumAiop == 0)
-		return (-1);
-	else
-		return (CtlP->NumAiop);
-}
-
-/*  Resets the speaker controller on RocketModem II and III devices */
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
-{
-	ByteIO_t addr;
-
-	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
-	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
-		addr = CtlP->AiopIO[0] + 0x4F;
-		sOutB(addr, 0);
-	}
-
-	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
-	if ((model == MODEL_UPCI_RM3_8PORT)
-	    || (model == MODEL_UPCI_RM3_4PORT)) {
-		addr = CtlP->AiopIO[0] + 0x88;
-		sOutB(addr, 0);
-	}
-}
-#endif
-
 /***************************************************************************
 Function: sReadAiopID
 Purpose:  Read the AIOP idenfication number directly from an AIOP.
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index beaa283..d07b6af 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -338,7 +338,8 @@ static int dw8250_runtime_suspend(struct device *dev)
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable_unprepare(data->clk);
 
 	return 0;
 }
@@ -347,7 +348,8 @@ static int dw8250_runtime_resume(struct device *dev)
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
 
-	clk_prepare_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_prepare_enable(data->clk);
 
 	return 0;
 }
@@ -367,6 +369,7 @@ MODULE_DEVICE_TABLE(of, dw8250_of_match);
 static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "INT33C4", 0 },
 	{ "INT33C5", 0 },
+	{ "80860F0A", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 85cfe11..ad41319 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -331,7 +331,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 		dmaengine_slave_config(chan, &rx_conf);
 		uap->dmarx.chan = chan;
 
-		if (plat->dma_rx_poll_enable) {
+		if (plat && plat->dma_rx_poll_enable) {
 			/* Set poll rate if specified. */
 			if (plat->dma_rx_poll_rate) {
 				uap->dmarx.auto_poll_rate = false;
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index e956377..65be0c0 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -707,8 +707,10 @@ static int __init mcf_init(void)
 	if (rc)
 		return rc;
 	rc = platform_driver_register(&mcf_platform_driver);
-	if (rc)
+	if (rc) {
+		uart_unregister_driver(&mcf_driver);
 		return rc;
+	}
 	return 0;
 }
 
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index d74ac06..510fa98 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1487,18 +1487,23 @@ mpc52xx_uart_init(void)
 	if (psc_ops && psc_ops->fifoc_init) {
 		ret = psc_ops->fifoc_init();
 		if (ret)
-			return ret;
+			goto err_init;
 	}
 
 	ret = platform_driver_register(&mpc52xx_uart_of_driver);
 	if (ret) {
 		printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
 		       __FILE__, ret);
-		uart_unregister_driver(&mpc52xx_uart_driver);
-		return ret;
+		goto err_reg;
 	}
 
 	return 0;
+err_reg:
+	if (psc_ops && psc_ops->fifoc_uninit)
+		psc_ops->fifoc_uninit();
+err_init:
+	uart_unregister_driver(&mpc52xx_uart_driver);
+	return ret;
 }
 
 static void __exit
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
index 77287c5..549c70a2 100644
--- a/drivers/tty/serial/nwpserial.c
+++ b/drivers/tty/serial/nwpserial.c
@@ -199,7 +199,7 @@ static void nwpserial_shutdown(struct uart_port *port)
 	dcr_write(up->dcr_host, UART_IER, up->ier);
 
 	/* free irq */
-	free_irq(up->port.irq, port);
+	free_irq(up->port.irq, up);
 }
 
 static int nwpserial_verify_port(struct uart_port *port,
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 9457fe3..393a8eb 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -203,26 +203,6 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
 	return pdata->get_context_loss_count(up->dev);
 }
 
-static void serial_omap_set_forceidle(struct uart_omap_port *up)
-{
-	struct omap_uart_port_info *pdata = up->dev->platform_data;
-
-	if (!pdata || !pdata->set_forceidle)
-		return;
-
-	pdata->set_forceidle(up->dev);
-}
-
-static void serial_omap_set_noidle(struct uart_omap_port *up)
-{
-	struct omap_uart_port_info *pdata = up->dev->platform_data;
-
-	if (!pdata || !pdata->set_noidle)
-		return;
-
-	pdata->set_noidle(up->dev);
-}
-
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
 	struct omap_uart_port_info *pdata = up->dev->platform_data;
@@ -299,8 +279,6 @@ static void serial_omap_stop_tx(struct uart_port *port)
 		serial_out(up, UART_IER, up->ier);
 	}
 
-	serial_omap_set_forceidle(up);
-
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 }
@@ -365,7 +343,6 @@ static void serial_omap_start_tx(struct uart_port *port)
 
 	pm_runtime_get_sync(up->dev);
 	serial_omap_enable_ier_thri(up);
-	serial_omap_set_noidle(up);
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 }
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 074b919..8942941 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1803,6 +1803,7 @@ static int __init s3c24xx_serial_modinit(void)
 
 static void __exit s3c24xx_serial_modexit(void)
 {
+	platform_driver_unregister(&samsung_serial_driver);
 	uart_unregister_driver(&s3c24xx_uart_drv);
 }
 
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index d4ba2ba..c677829 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -779,7 +779,6 @@ int vc_allocate(unsigned int currcons)	/* return 0 on success */
 		con_set_default_unimap(vc);
 	    vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
 	    if (!vc->vc_screenbuf) {
-		tty_port_destroy(&vc->port);
 		kfree(vc);
 		vc_cons[currcons].d = NULL;
 		return -ENOMEM;
@@ -986,26 +985,25 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws)
 	return ret;
 }
 
-void vc_deallocate(unsigned int currcons)
+struct vc_data *vc_deallocate(unsigned int currcons)
 {
+	struct vc_data *vc = NULL;
+
 	WARN_CONSOLE_UNLOCKED();
 
 	if (vc_cons_allocated(currcons)) {
-		struct vc_data *vc = vc_cons[currcons].d;
-		struct vt_notifier_param param = { .vc = vc };
+		struct vt_notifier_param param;
 
+		param.vc = vc = vc_cons[currcons].d;
 		atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, &param);
 		vcs_remove_sysfs(currcons);
 		vc->vc_sw->con_deinit(vc);
 		put_pid(vc->vt_pid);
 		module_put(vc->vc_sw->owner);
 		kfree(vc->vc_screenbuf);
-		if (currcons >= MIN_NR_CONSOLES) {
-			tty_port_destroy(&vc->port);
-			kfree(vc);
-		}
 		vc_cons[currcons].d = NULL;
 	}
+	return vc;
 }
 
 /*
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 98ff173..fc2c06c 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -283,6 +283,51 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
 	return 0;
 }
 
+/* deallocate a single console, if possible (leave 0) */
+static int vt_disallocate(unsigned int vc_num)
+{
+	struct vc_data *vc = NULL;
+	int ret = 0;
+
+	if (!vc_num)
+		return 0;
+
+	console_lock();
+	if (VT_BUSY(vc_num))
+		ret = -EBUSY;
+	else
+		vc = vc_deallocate(vc_num);
+	console_unlock();
+
+	if (vc && vc_num >= MIN_NR_CONSOLES) {
+		tty_port_destroy(&vc->port);
+		kfree(vc);
+	}
+
+	return ret;
+}
+
+/* deallocate all unused consoles, but leave 0 */
+static void vt_disallocate_all(void)
+{
+	struct vc_data *vc[MAX_NR_CONSOLES];
+	int i;
+
+	console_lock();
+	for (i = 1; i < MAX_NR_CONSOLES; i++)
+		if (!VT_BUSY(i))
+			vc[i] = vc_deallocate(i);
+		else
+			vc[i] = NULL;
+	console_unlock();
+
+	for (i = 1; i < MAX_NR_CONSOLES; i++) {
+		if (vc[i] && i >= MIN_NR_CONSOLES) {
+			tty_port_destroy(&vc[i]->port);
+			kfree(vc[i]);
+		}
+	}
+}
 
 
 /*
@@ -769,24 +814,10 @@ int vt_ioctl(struct tty_struct *tty,
 			ret = -ENXIO;
 			break;
 		}
-		if (arg == 0) {
-		    /* deallocate all unused consoles, but leave 0 */
-			console_lock();
-			for (i=1; i<MAX_NR_CONSOLES; i++)
-				if (! VT_BUSY(i))
-					vc_deallocate(i);
-			console_unlock();
-		} else {
-			/* deallocate a single console, if possible */
-			arg--;
-			if (VT_BUSY(arg))
-				ret = -EBUSY;
-			else if (arg) {			      /* leave 0 */
-				console_lock();
-				vc_deallocate(arg);
-				console_unlock();
-			}
-		}
+		if (arg == 0)
+			vt_disallocate_all();
+		else
+			ret = vt_disallocate(--arg);
 		break;
 
 	case VT_RESIZE: