Merge 3.4-rc4 into tty-next

This resolves the merge problem with:
	drivers/tty/serial/pch_uart.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

19 files changed, 652 insertions, 880 deletions

diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 946f799..61fc74f 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -62,9 +62,7 @@ static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d)
 
 static struct tty_driver *bfin_jc_driver;
 static struct task_struct *bfin_jc_kthread;
-static struct tty_struct * volatile bfin_jc_tty;
-static unsigned long bfin_jc_count;
-static DEFINE_MUTEX(bfin_jc_tty_mutex);
+static struct tty_port port;
 static volatile struct circ_buf bfin_jc_write_buf;
 
 static int
@@ -73,18 +71,21 @@ bfin_jc_emudat_manager(void *arg)
 	uint32_t inbound_len = 0, outbound_len = 0;
 
 	while (!kthread_should_stop()) {
+		struct tty_struct *tty = tty_port_tty_get(&port);
 		/* no one left to give data to, so sleep */
-		if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
+		if (tty == NULL && circ_empty(&bfin_jc_write_buf)) {
 			pr_debug("waiting for readers\n");
 			__set_current_state(TASK_UNINTERRUPTIBLE);
 			schedule();
 			__set_current_state(TASK_RUNNING);
+			continue;
 		}
 
 		/* no data available, so just chill */
 		if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
 			pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n",
 				inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
+			tty_kref_put(tty);
 			if (inbound_len)
 				schedule();
 			else
@@ -94,9 +95,6 @@ bfin_jc_emudat_manager(void *arg)
 
 		/* if incoming data is ready, eat it */
 		if (bfin_read_DBGSTAT() & EMUDIF) {
-			struct tty_struct *tty;
-			mutex_lock(&bfin_jc_tty_mutex);
-			tty = (struct tty_struct *)bfin_jc_tty;
 			if (tty != NULL) {
 				uint32_t emudat = bfin_read_emudat();
 				if (inbound_len == 0) {
@@ -110,7 +108,6 @@ bfin_jc_emudat_manager(void *arg)
 					tty_flip_buffer_push(tty);
 				}
 			}
-			mutex_unlock(&bfin_jc_tty_mutex);
 		}
 
 		/* if outgoing data is ready, post it */
@@ -120,7 +117,6 @@ bfin_jc_emudat_manager(void *arg)
 				bfin_write_emudat(outbound_len);
 				pr_debug("outgoing length: 0x%08x\n", outbound_len);
 			} else {
-				struct tty_struct *tty;
 				int tail = bfin_jc_write_buf.tail;
 				size_t ate = (4 <= outbound_len ? 4 : outbound_len);
 				uint32_t emudat =
@@ -132,14 +128,12 @@ bfin_jc_emudat_manager(void *arg)
 				);
 				bfin_jc_write_buf.tail += ate;
 				outbound_len -= ate;
-				mutex_lock(&bfin_jc_tty_mutex);
-				tty = (struct tty_struct *)bfin_jc_tty;
 				if (tty)
 					tty_wakeup(tty);
-				mutex_unlock(&bfin_jc_tty_mutex);
 				pr_debug("  outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
 			}
 		}
+		tty_kref_put(tty);
 	}
 
 	__set_current_state(TASK_RUNNING);
@@ -149,24 +143,28 @@ bfin_jc_emudat_manager(void *arg)
 static int
 bfin_jc_open(struct tty_struct *tty, struct file *filp)
 {
-	mutex_lock(&bfin_jc_tty_mutex);
-	pr_debug("open %lu\n", bfin_jc_count);
-	++bfin_jc_count;
-	bfin_jc_tty = tty;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port.lock, flags);
+	port.count++;
+	spin_unlock_irqrestore(&port.lock, flags);
+	tty_port_tty_set(&port, tty);
 	wake_up_process(bfin_jc_kthread);
-	mutex_unlock(&bfin_jc_tty_mutex);
 	return 0;
 }
 
 static void
 bfin_jc_close(struct tty_struct *tty, struct file *filp)
 {
-	mutex_lock(&bfin_jc_tty_mutex);
-	pr_debug("close %lu\n", bfin_jc_count);
-	if (--bfin_jc_count == 0)
-		bfin_jc_tty = NULL;
+	unsigned long flags;
+	bool last;
+
+	spin_lock_irqsave(&port.lock, flags);
+	last = --port.count == 0;
+	spin_unlock_irqrestore(&port.lock, flags);
+	if (last)
+		tty_port_tty_set(&port, NULL);
 	wake_up_process(bfin_jc_kthread);
-	mutex_unlock(&bfin_jc_tty_mutex);
 }
 
 /* XXX: we dont handle the put_char() case where we must handle count = 1 */
@@ -242,6 +240,8 @@ static int __init bfin_jc_init(void)
 {
 	int ret;
 
+	tty_port_init(&port);
+
 	bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
 	if (IS_ERR(bfin_jc_kthread))
 		return PTR_ERR(bfin_jc_kthread);
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 8880adf..2d691eb 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -107,7 +107,7 @@ static struct hvc_struct *hvc_get_by_index(int index)
 	list_for_each_entry(hp, &hvc_structs, next) {
 		spin_lock_irqsave(&hp->lock, flags);
 		if (hp->index == index) {
-			kref_get(&hp->kref);
+			tty_port_get(&hp->port);
 			spin_unlock_irqrestore(&hp->lock, flags);
 			spin_unlock(&hvc_structs_lock);
 			return hp;
@@ -229,9 +229,9 @@ static int __init hvc_console_init(void)
 console_initcall(hvc_console_init);
 
 /* callback when the kboject ref count reaches zero. */
-static void destroy_hvc_struct(struct kref *kref)
+static void hvc_port_destruct(struct tty_port *port)
 {
-	struct hvc_struct *hp = container_of(kref, struct hvc_struct, kref);
+	struct hvc_struct *hp = container_of(port, struct hvc_struct, port);
 	unsigned long flags;
 
 	spin_lock(&hvc_structs_lock);
@@ -264,7 +264,7 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
 	/* make sure no no tty has been registered in this index */
 	hp = hvc_get_by_index(index);
 	if (hp) {
-		kref_put(&hp->kref, destroy_hvc_struct);
+		tty_port_put(&hp->port);
 		return -1;
 	}
 
@@ -313,20 +313,17 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	if (!(hp = hvc_get_by_index(tty->index)))
 		return -ENODEV;
 
-	spin_lock_irqsave(&hp->lock, flags);
+	spin_lock_irqsave(&hp->port.lock, flags);
 	/* Check and then increment for fast path open. */
-	if (hp->count++ > 0) {
-		tty_kref_get(tty);
-		spin_unlock_irqrestore(&hp->lock, flags);
+	if (hp->port.count++ > 0) {
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 		hvc_kick();
 		return 0;
 	} /* else count == 0 */
+	spin_unlock_irqrestore(&hp->port.lock, flags);
 
 	tty->driver_data = hp;
-
-	hp->tty = tty_kref_get(tty);
-
-	spin_unlock_irqrestore(&hp->lock, flags);
+	tty_port_tty_set(&hp->port, tty);
 
 	if (hp->ops->notifier_add)
 		rc = hp->ops->notifier_add(hp, hp->data);
@@ -338,12 +335,9 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	 * tty fields and return the kref reference.
 	 */
 	if (rc) {
-		spin_lock_irqsave(&hp->lock, flags);
-		hp->tty = NULL;
-		spin_unlock_irqrestore(&hp->lock, flags);
-		tty_kref_put(tty);
+		tty_port_tty_set(&hp->port, NULL);
 		tty->driver_data = NULL;
-		kref_put(&hp->kref, destroy_hvc_struct);
+		tty_port_put(&hp->port);
 		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
 	}
 	/* Force wakeup of the polling thread */
@@ -370,12 +364,12 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 
 	hp = tty->driver_data;
 
-	spin_lock_irqsave(&hp->lock, flags);
+	spin_lock_irqsave(&hp->port.lock, flags);
 
-	if (--hp->count == 0) {
+	if (--hp->port.count == 0) {
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 		/* We are done with the tty pointer now. */
-		hp->tty = NULL;
-		spin_unlock_irqrestore(&hp->lock, flags);
+		tty_port_tty_set(&hp->port, NULL);
 
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
@@ -390,14 +384,13 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		 */
 		tty_wait_until_sent_from_close(tty, HVC_CLOSE_WAIT);
 	} else {
-		if (hp->count < 0)
+		if (hp->port.count < 0)
 			printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
-				hp->vtermno, hp->count);
-		spin_unlock_irqrestore(&hp->lock, flags);
+				hp->vtermno, hp->port.count);
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 	}
 
-	tty_kref_put(tty);
-	kref_put(&hp->kref, destroy_hvc_struct);
+	tty_port_put(&hp->port);
 }
 
 static void hvc_hangup(struct tty_struct *tty)
@@ -412,32 +405,31 @@ static void hvc_hangup(struct tty_struct *tty)
 	/* cancel pending tty resize work */
 	cancel_work_sync(&hp->tty_resize);
 
-	spin_lock_irqsave(&hp->lock, flags);
+	spin_lock_irqsave(&hp->port.lock, flags);
 
 	/*
 	 * The N_TTY line discipline has problems such that in a close vs
 	 * open->hangup case this can be called after the final close so prevent
 	 * that from happening for now.
 	 */
-	if (hp->count <= 0) {
-		spin_unlock_irqrestore(&hp->lock, flags);
+	if (hp->port.count <= 0) {
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 		return;
 	}
 
-	temp_open_count = hp->count;
-	hp->count = 0;
-	hp->n_outbuf = 0;
-	hp->tty = NULL;
+	temp_open_count = hp->port.count;
+	hp->port.count = 0;
+	spin_unlock_irqrestore(&hp->port.lock, flags);
+	tty_port_tty_set(&hp->port, NULL);
 
-	spin_unlock_irqrestore(&hp->lock, flags);
+	hp->n_outbuf = 0;
 
 	if (hp->ops->notifier_hangup)
 		hp->ops->notifier_hangup(hp, hp->data);
 
 	while(temp_open_count) {
 		--temp_open_count;
-		tty_kref_put(tty);
-		kref_put(&hp->kref, destroy_hvc_struct);
+		tty_port_put(&hp->port);
 	}
 }
 
@@ -478,7 +470,8 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count
 	if (!hp)
 		return -EPIPE;
 
-	if (hp->count <= 0)
+	/* FIXME what's this (unprotected) check for? */
+	if (hp->port.count <= 0)
 		return -EIO;
 
 	spin_lock_irqsave(&hp->lock, flags);
@@ -526,13 +519,12 @@ static void hvc_set_winsz(struct work_struct *work)
 
 	hp = container_of(work, struct hvc_struct, tty_resize);
 
-	spin_lock_irqsave(&hp->lock, hvc_flags);
-	if (!hp->tty) {
-		spin_unlock_irqrestore(&hp->lock, hvc_flags);
+	tty = tty_port_tty_get(&hp->port);
+	if (!tty)
 		return;
-	}
-	ws  = hp->ws;
-	tty = tty_kref_get(hp->tty);
+
+	spin_lock_irqsave(&hp->lock, hvc_flags);
+	ws = hp->ws;
 	spin_unlock_irqrestore(&hp->lock, hvc_flags);
 
 	tty_do_resize(tty, &ws);
@@ -601,7 +593,7 @@ int hvc_poll(struct hvc_struct *hp)
 	}
 
 	/* No tty attached, just skip */
-	tty = tty_kref_get(hp->tty);
+	tty = tty_port_tty_get(&hp->port);
 	if (tty == NULL)
 		goto bail;
 
@@ -681,8 +673,7 @@ int hvc_poll(struct hvc_struct *hp)
 
 		tty_flip_buffer_push(tty);
 	}
-	if (tty)
-		tty_kref_put(tty);
+	tty_kref_put(tty);
 
 	return poll_mask;
 }
@@ -817,6 +808,10 @@ static const struct tty_operations hvc_ops = {
 #endif
 };
 
+static const struct tty_port_operations hvc_port_ops = {
+	.destruct = hvc_port_destruct,
+};
+
 struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
 			     const struct hv_ops *ops,
 			     int outbuf_size)
@@ -842,7 +837,8 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
 	hp->outbuf_size = outbuf_size;
 	hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))];
 
-	kref_init(&hp->kref);
+	tty_port_init(&hp->port);
+	hp->port.ops = &hvc_port_ops;
 
 	INIT_WORK(&hp->tty_resize, hvc_set_winsz);
 	spin_lock_init(&hp->lock);
@@ -875,9 +871,9 @@ int hvc_remove(struct hvc_struct *hp)
 	unsigned long flags;
 	struct tty_struct *tty;
 
-	spin_lock_irqsave(&hp->lock, flags);
-	tty = tty_kref_get(hp->tty);
+	tty = tty_port_tty_get(&hp->port);
 
+	spin_lock_irqsave(&hp->lock, flags);
 	if (hp->index < MAX_NR_HVC_CONSOLES)
 		vtermnos[hp->index] = -1;
 
@@ -891,7 +887,7 @@ int hvc_remove(struct hvc_struct *hp)
 	 * kref cause it to be removed, which will probably be the tty_vhangup
 	 * below.
 	 */
-	kref_put(&hp->kref, destroy_hvc_struct);
+	tty_port_put(&hp->port);
 
 	/*
 	 * This function call will auto chain call hvc_hangup.
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
index c335a14..674d23c 100644
--- a/drivers/tty/hvc/hvc_console.h
+++ b/drivers/tty/hvc/hvc_console.h
@@ -46,10 +46,9 @@
 #define HVC_ALLOC_TTY_ADAPTERS	8
 
 struct hvc_struct {
+	struct tty_port port;
 	spinlock_t lock;
 	int index;
-	struct tty_struct *tty;
-	int count;
 	int do_wakeup;
 	char *outbuf;
 	int outbuf_size;
@@ -61,7 +60,6 @@ struct hvc_struct {
 	struct winsize ws;
 	struct work_struct tty_resize;
 	struct list_head next;
-	struct kref kref; /* ref count & hvc_struct lifetime */
 };
 
 /* implemented by a low level driver */
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 3436436..d56788c 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -261,6 +261,7 @@ static DEFINE_SPINLOCK(hvcs_pi_lock);
 
 /* One vty-server per hvcs_struct */
 struct hvcs_struct {
+	struct tty_port port;
 	spinlock_t lock;
 
 	/*
@@ -269,9 +270,6 @@ struct hvcs_struct {
 	 */
 	unsigned int index;
 
-	struct tty_struct *tty;
-	int open_count;
-
 	/*
 	 * Used to tell the driver kernel_thread what operations need to take
 	 * place upon this hvcs_struct instance.
@@ -290,12 +288,11 @@ struct hvcs_struct {
 	int chars_in_buffer;
 
 	/*
-	 * Any variable below the kref is valid before a tty is connected and
+	 * Any variable below is valid before a tty is connected and
 	 * stays valid after the tty is disconnected.  These shouldn't be
 	 * whacked until the kobject refcount reaches zero though some entries
 	 * may be changed via sysfs initiatives.
 	 */
-	struct kref kref; /* ref count & hvcs_struct lifetime */
 	int connected; /* is the vty-server currently connected to a vty? */
 	uint32_t p_unit_address; /* partner unit address */
 	uint32_t p_partition_ID; /* partner partition ID */
@@ -304,9 +301,6 @@ struct hvcs_struct {
 	struct vio_dev *vdev;
 };
 
-/* Required to back map a kref to its containing object */
-#define from_kref(k) container_of(k, struct hvcs_struct, kref)
-
 static LIST_HEAD(hvcs_structs);
 static DEFINE_SPINLOCK(hvcs_structs_lock);
 static DEFINE_MUTEX(hvcs_init_mutex);
@@ -422,7 +416,7 @@ static ssize_t hvcs_vterm_state_store(struct device *dev, struct device_attribut
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
-	if (hvcsd->open_count > 0) {
+	if (hvcsd->port.count > 0) {
 		spin_unlock_irqrestore(&hvcsd->lock, flags);
 		printk(KERN_INFO "HVCS: vterm state unchanged.  "
 				"The hvcs device node is still in use.\n");
@@ -564,7 +558,7 @@ static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance)
 static void hvcs_try_write(struct hvcs_struct *hvcsd)
 {
 	uint32_t unit_address = hvcsd->vdev->unit_address;
-	struct tty_struct *tty = hvcsd->tty;
+	struct tty_struct *tty = hvcsd->port.tty;
 	int sent;
 
 	if (hvcsd->todo_mask & HVCS_TRY_WRITE) {
@@ -602,7 +596,7 @@ static int hvcs_io(struct hvcs_struct *hvcsd)
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
 	unit_address = hvcsd->vdev->unit_address;
-	tty = hvcsd->tty;
+	tty = hvcsd->port.tty;
 
 	hvcs_try_write(hvcsd);
 
@@ -701,10 +695,9 @@ static void hvcs_return_index(int index)
 		hvcs_index_list[index] = -1;
 }
 
-/* callback when the kref ref count reaches zero */
-static void destroy_hvcs_struct(struct kref *kref)
+static void hvcs_destruct_port(struct tty_port *p)
 {
-	struct hvcs_struct *hvcsd = from_kref(kref);
+	struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port);
 	struct vio_dev *vdev;
 	unsigned long flags;
 
@@ -741,6 +734,10 @@ static void destroy_hvcs_struct(struct kref *kref)
 	kfree(hvcsd);
 }
 
+static const struct tty_port_operations hvcs_port_ops = {
+	.destruct = hvcs_destruct_port,
+};
+
 static int hvcs_get_index(void)
 {
 	int i;
@@ -789,10 +786,9 @@ static int __devinit hvcs_probe(
 	if (!hvcsd)
 		return -ENODEV;
 
-
+	tty_port_init(&hvcsd->port);
+	hvcsd->port.ops = &hvcs_port_ops;
 	spin_lock_init(&hvcsd->lock);
-	/* Automatically incs the refcount the first time */
-	kref_init(&hvcsd->kref);
 
 	hvcsd->vdev = dev;
 	dev_set_drvdata(&dev->dev, hvcsd);
@@ -852,7 +848,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
-	tty = hvcsd->tty;
+	tty = hvcsd->port.tty;
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
@@ -860,7 +856,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
 	 * Let the last holder of this object cause it to be removed, which
 	 * would probably be tty_hangup below.
 	 */
-	kref_put(&hvcsd->kref, destroy_hvcs_struct);
+	tty_port_put(&hvcsd->port);
 
 	/*
 	 * The hangup is a scheduled function which will auto chain call
@@ -1094,7 +1090,7 @@ static struct hvcs_struct *hvcs_get_by_index(int index)
 	list_for_each_entry(hvcsd, &hvcs_structs, next) {
 		spin_lock_irqsave(&hvcsd->lock, flags);
 		if (hvcsd->index == index) {
-			kref_get(&hvcsd->kref);
+			tty_port_get(&hvcsd->port);
 			spin_unlock_irqrestore(&hvcsd->lock, flags);
 			spin_unlock(&hvcs_structs_lock);
 			return hvcsd;
@@ -1138,8 +1134,8 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
 		if ((retval = hvcs_partner_connect(hvcsd)))
 			goto error_release;
 
-	hvcsd->open_count = 1;
-	hvcsd->tty = tty;
+	hvcsd->port.count = 1;
+	hvcsd->port.tty = tty;
 	tty->driver_data = hvcsd;
 
 	memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
@@ -1160,7 +1156,7 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
 	 * and will grab the spinlock and free the connection if it fails.
 	 */
 	if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
-		kref_put(&hvcsd->kref, destroy_hvcs_struct);
+		tty_port_put(&hvcsd->port);
 		printk(KERN_WARNING "HVCS: enable device failed.\n");
 		return rc;
 	}
@@ -1171,8 +1167,8 @@ fast_open:
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	kref_get(&hvcsd->kref);
-	hvcsd->open_count++;
+	tty_port_get(&hvcsd->port);
+	hvcsd->port.count++;
 	hvcsd->todo_mask |= HVCS_SCHED_READ;
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
@@ -1186,7 +1182,7 @@ open_success:
 
 error_release:
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
-	kref_put(&hvcsd->kref, destroy_hvcs_struct);
+	tty_port_put(&hvcsd->port);
 
 	printk(KERN_WARNING "HVCS: partner connect failed.\n");
 	return retval;
@@ -1216,7 +1212,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	if (--hvcsd->open_count == 0) {
+	if (--hvcsd->port.count == 0) {
 
 		vio_disable_interrupts(hvcsd->vdev);
 
@@ -1225,7 +1221,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 		 * execute any operations on the TTY even though it is obligated
 		 * to deliver any pending I/O to the hypervisor.
 		 */
-		hvcsd->tty = NULL;
+		hvcsd->port.tty = NULL;
 
 		irq = hvcsd->vdev->irq;
 		spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1240,16 +1236,16 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 		tty->driver_data = NULL;
 
 		free_irq(irq, hvcsd);
-		kref_put(&hvcsd->kref, destroy_hvcs_struct);
+		tty_port_put(&hvcsd->port);
 		return;
-	} else if (hvcsd->open_count < 0) {
+	} else if (hvcsd->port.count < 0) {
 		printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
 				" is missmanaged.\n",
-		hvcsd->vdev->unit_address, hvcsd->open_count);
+		hvcsd->vdev->unit_address, hvcsd->port.count);
 	}
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
-	kref_put(&hvcsd->kref, destroy_hvcs_struct);
+	tty_port_put(&hvcsd->port);
 }
 
 static void hvcs_hangup(struct tty_struct * tty)
@@ -1261,7 +1257,7 @@ static void hvcs_hangup(struct tty_struct * tty)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 	/* Preserve this so that we know how many kref refs to put */
-	temp_open_count = hvcsd->open_count;
+	temp_open_count = hvcsd->port.count;
 
 	/*
 	 * Don't kref put inside the spinlock because the destruction
@@ -1273,10 +1269,10 @@ static void hvcs_hangup(struct tty_struct * tty)
 	hvcsd->todo_mask = 0;
 
 	/* I don't think the tty needs the hvcs_struct pointer after a hangup */
-	hvcsd->tty->driver_data = NULL;
-	hvcsd->tty = NULL;
+	tty->driver_data = NULL;
+	hvcsd->port.tty = NULL;
 
-	hvcsd->open_count = 0;
+	hvcsd->port.count = 0;
 
 	/* This will drop any buffered data on the floor which is OK in a hangup
 	 * scenario. */
@@ -1301,7 +1297,7 @@ static void hvcs_hangup(struct tty_struct * tty)
 		 * NOTE:  If this hangup was signaled from user space then the
 		 * final put will never happen.
 		 */
-		kref_put(&hvcsd->kref, destroy_hvcs_struct);
+		tty_port_put(&hvcsd->port);
 	}
 }
 
@@ -1347,7 +1343,7 @@ static int hvcs_write(struct tty_struct *tty,
 	 * the middle of a write operation?  This is a crummy place to do this
 	 * but we want to keep it all in the spinlock.
 	 */
-	if (hvcsd->open_count <= 0) {
+	if (hvcsd->port.count <= 0) {
 		spin_unlock_irqrestore(&hvcsd->lock, flags);
 		return -ENODEV;
 	}
@@ -1421,7 +1417,7 @@ static int hvcs_write_room(struct tty_struct *tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 
-	if (!hvcsd || hvcsd->open_count <= 0)
+	if (!hvcsd || hvcsd->port.count <= 0)
 		return 0;
 
 	return HVCS_BUFF_LEN - hvcsd->chars_in_buffer;
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index a7488b7..6f5bc49 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -69,14 +69,13 @@
 #define __ALIGNED__	__attribute__((__aligned__(sizeof(long))))
 
 struct hvsi_struct {
+	struct tty_port port;
 	struct delayed_work writer;
 	struct work_struct handshaker;
 	wait_queue_head_t emptyq; /* woken when outbuf is emptied */
 	wait_queue_head_t stateq; /* woken when HVSI state changes */
 	spinlock_t lock;
 	int index;
-	struct tty_struct *tty;
-	int count;
 	uint8_t throttle_buf[128];
 	uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */
 	/* inbuf is for packet reassembly. leave a little room for leftovers. */
@@ -237,7 +236,7 @@ static int hvsi_read(struct hvsi_struct *hp, char *buf, int count)
 }
 
 static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
-	struct tty_struct **to_hangup, struct hvsi_struct **to_handshake)
+	struct tty_struct *tty, struct hvsi_struct **to_handshake)
 {
 	struct hvsi_control *header = (struct hvsi_control *)packet;
 
@@ -247,9 +246,8 @@ static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
 				/* CD went away; no more connection */
 				pr_debug("hvsi%i: CD dropped\n", hp->index);
 				hp->mctrl &= TIOCM_CD;
-				/* If userland hasn't done an open(2) yet, hp->tty is NULL. */
-				if (hp->tty && !(hp->tty->flags & CLOCAL))
-					*to_hangup = hp->tty;
+				if (tty && !C_CLOCAL(tty))
+					tty_hangup(tty);
 			}
 			break;
 		case VSV_CLOSE_PROTOCOL:
@@ -331,7 +329,8 @@ static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet)
 	}
 }
 
-static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
+static void hvsi_insert_chars(struct hvsi_struct *hp, struct tty_struct *tty,
+		const char *buf, int len)
 {
 	int i;
 
@@ -347,7 +346,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
 			continue;
 		}
 #endif /* CONFIG_MAGIC_SYSRQ */
-		tty_insert_flip_char(hp->tty, c, 0);
+		tty_insert_flip_char(tty, c, 0);
 	}
 }
 
@@ -360,7 +359,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
  * revisited.
  */
 #define TTY_THRESHOLD_THROTTLE 128
-static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
+static bool hvsi_recv_data(struct hvsi_struct *hp, struct tty_struct *tty,
 		const uint8_t *packet)
 {
 	const struct hvsi_header *header = (const struct hvsi_header *)packet;
@@ -371,14 +370,14 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
 	pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data);
 
 	if (datalen == 0)
-		return NULL;
+		return false;
 
 	if (overflow > 0) {
 		pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__);
 		datalen = TTY_THRESHOLD_THROTTLE;
 	}
 
-	hvsi_insert_chars(hp, data, datalen);
+	hvsi_insert_chars(hp, tty, data, datalen);
 
 	if (overflow > 0) {
 		/*
@@ -390,7 +389,7 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
 		hp->n_throttle = overflow;
 	}
 
-	return hp->tty;
+	return true;
 }
 
 /*
@@ -399,14 +398,13 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
  * machine during console handshaking (in which case tty = NULL and we ignore
  * incoming data).
  */
-static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
-		struct tty_struct **hangup, struct hvsi_struct **handshake)
+static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty,
+		struct hvsi_struct **handshake)
 {
 	uint8_t *packet = hp->inbuf;
 	int chunklen;
+	bool flip = false;
 
-	*flip = NULL;
-	*hangup = NULL;
 	*handshake = NULL;
 
 	chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ);
@@ -440,12 +438,12 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
 			case VS_DATA_PACKET_HEADER:
 				if (!is_open(hp))
 					break;
-				if (hp->tty == NULL)
+				if (tty == NULL)
 					break; /* no tty buffer to put data in */
-				*flip = hvsi_recv_data(hp, packet);
+				flip = hvsi_recv_data(hp, tty, packet);
 				break;
 			case VS_CONTROL_PACKET_HEADER:
-				hvsi_recv_control(hp, packet, hangup, handshake);
+				hvsi_recv_control(hp, packet, tty, handshake);
 				break;
 			case VS_QUERY_RESPONSE_PACKET_HEADER:
 				hvsi_recv_response(hp, packet);
@@ -462,28 +460,26 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
 
 		packet += len_packet(packet);
 
-		if (*hangup || *handshake) {
-			pr_debug("%s: hangup or handshake\n", __func__);
-			/*
-			 * we need to send the hangup now before receiving any more data.
-			 * If we get "data, hangup, data", we can't deliver the second
-			 * data before the hangup.
-			 */
+		if (*handshake) {
+			pr_debug("%s: handshake\n", __func__);
 			break;
 		}
 	}
 
 	compact_inbuf(hp, packet);
 
+	if (flip)
+		tty_flip_buffer_push(tty);
+
 	return 1;
 }
 
-static void hvsi_send_overflow(struct hvsi_struct *hp)
+static void hvsi_send_overflow(struct hvsi_struct *hp, struct tty_struct *tty)
 {
 	pr_debug("%s: delivering %i bytes overflow\n", __func__,
 			hp->n_throttle);
 
-	hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle);
+	hvsi_insert_chars(hp, tty, hp->throttle_buf, hp->n_throttle);
 	hp->n_throttle = 0;
 }
 
@@ -494,35 +490,20 @@ static void hvsi_send_overflow(struct hvsi_struct *hp)
 static irqreturn_t hvsi_interrupt(int irq, void *arg)
 {
 	struct hvsi_struct *hp = (struct hvsi_struct *)arg;
-	struct tty_struct *flip;
-	struct tty_struct *hangup;
 	struct hvsi_struct *handshake;
+	struct tty_struct *tty;
 	unsigned long flags;
 	int again = 1;
 
 	pr_debug("%s\n", __func__);
 
+	tty = tty_port_tty_get(&hp->port);
+
 	while (again) {
 		spin_lock_irqsave(&hp->lock, flags);
-		again = hvsi_load_chunk(hp, &flip, &hangup, &handshake);
+		again = hvsi_load_chunk(hp, tty, &handshake);
 		spin_unlock_irqrestore(&hp->lock, flags);
 
-		/*
-		 * we have to call tty_flip_buffer_push() and tty_hangup() outside our
-		 * spinlock. But we also have to keep going until we've read all the
-		 * available data.
-		 */
-
-		if (flip) {
-			/* there was data put in the tty flip buffer */
-			tty_flip_buffer_push(flip);
-			flip = NULL;
-		}
-
-		if (hangup) {
-			tty_hangup(hangup);
-		}
-
 		if (handshake) {
 			pr_debug("hvsi%i: attempting re-handshake\n", handshake->index);
 			schedule_work(&handshake->handshaker);
@@ -530,18 +511,15 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
 	}
 
 	spin_lock_irqsave(&hp->lock, flags);
-	if (hp->tty && hp->n_throttle
-			&& (!test_bit(TTY_THROTTLED, &hp->tty->flags))) {
-		/* we weren't hung up and we weren't throttled, so we can deliver the
-		 * rest now */
-		flip = hp->tty;
-		hvsi_send_overflow(hp);
+	if (tty && hp->n_throttle && !test_bit(TTY_THROTTLED, &tty->flags)) {
+		/* we weren't hung up and we weren't throttled, so we can
+		 * deliver the rest now */
+		hvsi_send_overflow(hp, tty);
+		tty_flip_buffer_push(tty);
 	}
 	spin_unlock_irqrestore(&hp->lock, flags);
 
-	if (flip) {
-		tty_flip_buffer_push(flip);
-	}
+	tty_kref_put(tty);
 
 	return IRQ_HANDLED;
 }
@@ -749,9 +727,9 @@ static int hvsi_open(struct tty_struct *tty, struct file *filp)
 	if (hp->state == HVSI_FSP_DIED)
 		return -EIO;
 
+	tty_port_tty_set(&hp->port, tty);
 	spin_lock_irqsave(&hp->lock, flags);
-	hp->tty = tty;
-	hp->count++;
+	hp->port.count++;
 	atomic_set(&hp->seqno, 0);
 	h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
 	spin_unlock_irqrestore(&hp->lock, flags);
@@ -808,8 +786,8 @@ static void hvsi_close(struct tty_struct *tty, struct file *filp)
 
 	spin_lock_irqsave(&hp->lock, flags);
 
-	if (--hp->count == 0) {
-		hp->tty = NULL;
+	if (--hp->port.count == 0) {
+		tty_port_tty_set(&hp->port, NULL);
 		hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */
 
 		/* only close down connection if it is not the console */
@@ -841,9 +819,9 @@ static void hvsi_close(struct tty_struct *tty, struct file *filp)
 
 			spin_lock_irqsave(&hp->lock, flags);
 		}
-	} else if (hp->count < 0)
+	} else if (hp->port.count < 0)
 		printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n",
-		       hp - hvsi_ports, hp->count);
+		       hp - hvsi_ports, hp->port.count);
 
 	spin_unlock_irqrestore(&hp->lock, flags);
 }
@@ -855,12 +833,11 @@ static void hvsi_hangup(struct tty_struct *tty)
 
 	pr_debug("%s\n", __func__);
 
-	spin_lock_irqsave(&hp->lock, flags);
+	tty_port_tty_set(&hp->port, NULL);
 
-	hp->count = 0;
+	spin_lock_irqsave(&hp->lock, flags);
+	hp->port.count = 0;
 	hp->n_outbuf = 0;
-	hp->tty = NULL;
-
 	spin_unlock_irqrestore(&hp->lock, flags);
 }
 
@@ -888,6 +865,7 @@ static void hvsi_write_worker(struct work_struct *work)
 {
 	struct hvsi_struct *hp =
 		container_of(work, struct hvsi_struct, writer.work);
+	struct tty_struct *tty;
 	unsigned long flags;
 #ifdef DEBUG
 	static long start_j = 0;
@@ -921,7 +899,11 @@ static void hvsi_write_worker(struct work_struct *work)
 		start_j = 0;
 #endif /* DEBUG */
 		wake_up_all(&hp->emptyq);
-		tty_wakeup(hp->tty);
+		tty = tty_port_tty_get(&hp->port);
+		if (tty) {
+			tty_wakeup(tty);
+			tty_kref_put(tty);
+		}
 	}
 
 out:
@@ -966,8 +948,8 @@ static int hvsi_write(struct tty_struct *tty,
 	 * and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls
 	 * will see there is no room in outbuf and return.
 	 */
-	while ((count > 0) && (hvsi_write_room(hp->tty) > 0)) {
-		int chunksize = min(count, hvsi_write_room(hp->tty));
+	while ((count > 0) && (hvsi_write_room(tty) > 0)) {
+		int chunksize = min(count, hvsi_write_room(tty));
 
 		BUG_ON(hp->n_outbuf < 0);
 		memcpy(hp->outbuf + hp->n_outbuf, source, chunksize);
@@ -1014,19 +996,16 @@ static void hvsi_unthrottle(struct tty_struct *tty)
 {
 	struct hvsi_struct *hp = tty->driver_data;
 	unsigned long flags;
-	int shouldflip = 0;
 
 	pr_debug("%s\n", __func__);
 
 	spin_lock_irqsave(&hp->lock, flags);
 	if (hp->n_throttle) {
-		hvsi_send_overflow(hp);
-		shouldflip = 1;
+		hvsi_send_overflow(hp, tty);
+		tty_flip_buffer_push(tty);
 	}
 	spin_unlock_irqrestore(&hp->lock, flags);
 
-	if (shouldflip)
-		tty_flip_buffer_push(hp->tty);
 
 	h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
 }
@@ -1228,6 +1207,7 @@ static int __init hvsi_console_init(void)
 		init_waitqueue_head(&hp->emptyq);
 		init_waitqueue_head(&hp->stateq);
 		spin_lock_init(&hp->lock);
+		tty_port_init(&hp->port);
 		hp->index = hvsi_count;
 		hp->inbuf_end = hp->inbuf;
 		hp->state = HVSI_CLOSED;
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index 6f4dd83..59c135d 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -377,7 +377,7 @@ int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp)
 	pr_devel("HVSI@%x: open !\n", pv->termno);
 
 	/* Keep track of the tty data structure */
-	pv->tty = tty_kref_get(hp->tty);
+	pv->tty = tty_port_tty_get(&hp->port);
 
 	hvsilib_establish(pv);
 
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index 4daf962..f8b5fa0 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -44,14 +44,13 @@
 #define TTYTYPE_RAS_RAW  (2)
 
 struct ipw_tty {
+	struct tty_port port;
 	int index;
 	struct ipw_hardware *hardware;
 	unsigned int channel_idx;
 	unsigned int secondary_channel_idx;
 	int tty_type;
 	struct ipw_network *network;
-	struct tty_struct *linux_tty;
-	int open_count;
 	unsigned int control_lines;
 	struct mutex ipw_tty_mutex;
 	int tx_bytes_queued;
@@ -73,23 +72,6 @@ static char *tty_type_name(int tty_type)
 	return channel_names[tty_type];
 }
 
-static void report_registering(struct ipw_tty *tty)
-{
-	char *iftype = tty_type_name(tty->tty_type);
-
-	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-	       ": registering %s device ttyIPWp%d\n", iftype, tty->index);
-}
-
-static void report_deregistering(struct ipw_tty *tty)
-{
-	char *iftype = tty_type_name(tty->tty_type);
-
-	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-	       ": deregistering %s device ttyIPWp%d\n", iftype,
-	       tty->index);
-}
-
 static struct ipw_tty *get_tty(int index)
 {
 	/*
@@ -117,12 +99,12 @@ static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return -ENODEV;
 	}
-	if (tty->open_count == 0)
+	if (tty->port.count == 0)
 		tty->tx_bytes_queued = 0;
 
-	tty->open_count++;
+	tty->port.count++;
 
-	tty->linux_tty = linux_tty;
+	tty->port.tty = linux_tty;
 	linux_tty->driver_data = tty;
 	linux_tty->low_latency = 1;
 
@@ -136,13 +118,13 @@ static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
 
 static void do_ipw_close(struct ipw_tty *tty)
 {
-	tty->open_count--;
+	tty->port.count--;
 
-	if (tty->open_count == 0) {
-		struct tty_struct *linux_tty = tty->linux_tty;
+	if (tty->port.count == 0) {
+		struct tty_struct *linux_tty = tty->port.tty;
 
 		if (linux_tty != NULL) {
-			tty->linux_tty = NULL;
+			tty->port.tty = NULL;
 			linux_tty->driver_data = NULL;
 
 			if (tty->tty_type == TTYTYPE_MODEM)
@@ -159,7 +141,7 @@ static void ipw_hangup(struct tty_struct *linux_tty)
 		return;
 
 	mutex_lock(&tty->ipw_tty_mutex);
-	if (tty->open_count == 0) {
+	if (tty->port.count == 0) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return;
 	}
@@ -182,13 +164,13 @@ void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
 	int work = 0;
 
 	mutex_lock(&tty->ipw_tty_mutex);
-	linux_tty = tty->linux_tty;
+	linux_tty = tty->port.tty;
 	if (linux_tty == NULL) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return;
 	}
 
-	if (!tty->open_count) {
+	if (!tty->port.count) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return;
 	}
@@ -230,7 +212,7 @@ static int ipw_write(struct tty_struct *linux_tty,
 		return -ENODEV;
 
 	mutex_lock(&tty->ipw_tty_mutex);
-	if (!tty->open_count) {
+	if (!tty->port.count) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return -EINVAL;
 	}
@@ -270,7 +252,7 @@ static int ipw_write_room(struct tty_struct *linux_tty)
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
@@ -312,7 +294,7 @@ static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
 	if (!tty)
 		return 0;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return 0;
 
 	return tty->tx_bytes_queued;
@@ -393,7 +375,7 @@ static int ipw_tiocmget(struct tty_struct *linux_tty)
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	return get_control_lines(tty);
@@ -409,7 +391,7 @@ ipw_tiocmset(struct tty_struct *linux_tty,
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	return set_control_lines(tty, set, clear);
@@ -423,7 +405,7 @@ static int ipw_ioctl(struct tty_struct *linux_tty,
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	/* FIXME: Exactly how is the tty object locked here .. */
@@ -492,6 +474,7 @@ static int add_tty(int j,
 	ttys[j]->network = network;
 	ttys[j]->tty_type = tty_type;
 	mutex_init(&ttys[j]->ipw_tty_mutex);
+	tty_port_init(&ttys[j]->port);
 
 	tty_register_device(ipw_tty_driver, j, NULL);
 	ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
@@ -500,8 +483,12 @@ static int add_tty(int j,
 		ipwireless_associate_network_tty(network,
 						 secondary_channel_idx,
 						 ttys[j]);
-	if (get_tty(j) == ttys[j])
-		report_registering(ttys[j]);
+	/* check if we provide raw device (if loopback is enabled) */
+	if (get_tty(j))
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		       ": registering %s device ttyIPWp%d\n",
+		       tty_type_name(tty_type), j);
+
 	return 0;
 }
 
@@ -560,19 +547,21 @@ void ipwireless_tty_free(struct ipw_tty *tty)
 
 		if (ttyj) {
 			mutex_lock(&ttyj->ipw_tty_mutex);
-			if (get_tty(j) == ttyj)
-				report_deregistering(ttyj);
+			if (get_tty(j))
+				printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+				       ": deregistering %s device ttyIPWp%d\n",
+				       tty_type_name(ttyj->tty_type), j);
 			ttyj->closing = 1;
-			if (ttyj->linux_tty != NULL) {
+			if (ttyj->port.tty != NULL) {
 				mutex_unlock(&ttyj->ipw_tty_mutex);
-				tty_hangup(ttyj->linux_tty);
-				/* Wait till the tty_hangup has completed */
-				flush_work_sync(&ttyj->linux_tty->hangup_work);
+				tty_vhangup(ttyj->port.tty);
 				/* FIXME: Exactly how is the tty object locked here
 				   against a parallel ioctl etc */
+				/* FIXME2: hangup does not mean all processes
+				 * are gone */
 				mutex_lock(&ttyj->ipw_tty_mutex);
 			}
-			while (ttyj->open_count)
+			while (ttyj->port.count)
 				do_ipw_close(ttyj);
 			ipwireless_disassociate_network_ttys(network,
 							     ttyj->channel_idx);
@@ -661,8 +650,8 @@ ipwireless_tty_notify_control_line_change(struct ipw_tty *tty,
 	 */
 	if ((old_control_lines & IPW_CONTROL_LINE_DCD)
 			&& !(tty->control_lines & IPW_CONTROL_LINE_DCD)
-			&& tty->linux_tty) {
-		tty_hangup(tty->linux_tty);
+			&& tty->port.tty) {
+		tty_hangup(tty->port.tty);
 	}
 }
 
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 5ce78252..3ed20e4 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -17,6 +17,7 @@
 #include <asm/dbg.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/serial.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
@@ -56,8 +57,6 @@
 #endif /* CONFIG_M68VZ328 */
 #endif /* CONFIG_M68EZ328 */
 
-#include "68328serial.h"
-
 /* Turn off usage of real serial interrupt code, to "support" Copilot */
 #ifdef CONFIG_XCOPILOT_BUGS
 #undef USE_INTS
@@ -65,33 +64,82 @@
 #define USE_INTS
 #endif
 
-static struct m68k_serial m68k_soft[NR_PORTS];
+/*
+ * I believe this is the optimal setting that reduces the number of interrupts.
+ * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
+ * if that bothers you), but in most cases it will not, since we try to
+ * transmit characters every time rs_interrupt is called. Thus, quite often
+ * you'll see that a receive interrupt occures before the transmit one.
+ *                                  -- Vladimir Gurevich
+ */
+#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
 
-static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
+/*
+ * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
+ * "Old data interrupt" which occures whenever the data stay in the FIFO
+ * longer than 30 bits time. This allows us to use FIFO without compromising
+ * latency. '328 does not have this feature and without the real  328-based
+ * board I would assume that RXRE is the safest setting.
+ *
+ * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
+ * interrupts. RXFE (receive queue full) causes the system to lose data
+ * at least at 115200 baud
+ *
+ * If your board is busy doing other stuff, you might consider to use
+ * RXRE (data ready intrrupt) instead.
+ *
+ * The other option is to make these INTR masks run-time configurable, so
+ * that people can dynamically adapt them according to the current usage.
+ *                                  -- Vladimir Gurevich
+ */
 
-/* multiple ports are contiguous in memory */
-m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
+/* (es) */
+#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
+#elif defined(CONFIG_M68328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
+#else
+#error Please, define the Rx interrupt events for your CPU
+#endif
+/* (/es) */
 
-struct tty_struct m68k_ttys;
-struct m68k_serial *m68k_consinfo = 0;
+/*
+ * This is our internal structure for each serial port's state.
+ */
+struct m68k_serial {
+	struct tty_port		tport;
+	char			is_cons;	/* Is this our console. */
+	int			magic;
+	int			baud_base;
+	int			port;
+	int			irq;
+	int			type;		/* UART type */
+	int			custom_divisor;
+	int			x_char;		/* xon/xoff character */
+	int			line;
+	unsigned char		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+};
 
-#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
+#define SERIAL_MAGIC 0x5301
 
-struct tty_driver *serial_driver;
+/*
+ * Define the number of ports supported and their irqs.
+ */
+#define NR_PORTS 1
 
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
+static struct m68k_serial m68k_soft[NR_PORTS];
 
-/* Debugging... DEBUG_INTR is bad to use when one of the zs
- * lines is your console ;(
- */
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
+static unsigned int uart_irqs[NR_PORTS] = { UART_IRQ_NUM };
 
-#define RS_ISR_PASS_LIMIT 256
+/* multiple ports are contiguous in memory */
+m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
+
+struct tty_driver *serial_driver;
 
-static void change_speed(struct m68k_serial *info);
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty);
 
 /*
  *	Setup for console. Argument comes from the boot command line.
@@ -143,17 +191,6 @@ static int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
 	9600, 19200, 38400, 57600, 115200, 0 };
 
-/* Sets or clears DTR/RTS on the requested line */
-static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
-{
-	if (set) {
-		/* set the RTS/CTS line */
-	} else {
-		/* clear it */
-	}
-	return;
-}
-
 /* Utility routines */
 static inline int get_baud(struct m68k_serial *ss)
 {
@@ -189,7 +226,8 @@ static void rs_stop(struct tty_struct *tty)
 
 static int rs_put_char(char ch)
 {
-        int flags, loops = 0;
+	unsigned long flags;
+	int loops = 0;
 
         local_irq_save(flags);
 
@@ -224,28 +262,9 @@ static void rs_start(struct tty_struct *tty)
 	local_irq_restore(flags);
 }
 
-/* Drop into either the boot monitor or kadb upon receiving a break
- * from keyboard/console input.
- */
-static void batten_down_hatches(void)
-{
-	/* Drop into the debugger */
-}
-
-static void status_handle(struct m68k_serial *info, unsigned short status)
+static void receive_chars(struct m68k_serial *info, struct tty_struct *tty,
+		unsigned short rx)
 {
-	/* If this is console input and this is a
-	 * 'break asserted' status change interrupt
-	 * see if we can drop into the debugger
-	 */
-	if((status & URX_BREAK) && info->break_abort)
-		batten_down_hatches();
-	return;
-}
-
-static void receive_chars(struct m68k_serial *info, unsigned short rx)
-{
-	struct tty_struct *tty = info->tty;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned char ch, flag;
 
@@ -259,7 +278,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
 	
 		if(info->is_cons) {
 			if(URX_BREAK & rx) { /* whee, break received */
-				status_handle(info, rx);
 				return;
 #ifdef CONFIG_MAGIC_SYSRQ
 			} else if (ch == 0x10) { /* ^P */
@@ -280,16 +298,13 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
 		
 		flag = TTY_NORMAL;
 
-		if(rx & URX_PARITY_ERROR) {
+		if (rx & URX_PARITY_ERROR)
 			flag = TTY_PARITY;
-			status_handle(info, rx);
-		} else if(rx & URX_OVRUN) {
+		else if (rx & URX_OVRUN)
 			flag = TTY_OVERRUN;
-			status_handle(info, rx);
-		} else if(rx & URX_FRAME_ERROR) {
+		else if (rx & URX_FRAME_ERROR)
 			flag = TTY_FRAME;
-			status_handle(info, rx);
-		}
+
 		tty_insert_flip_char(tty, ch, flag);
 #ifndef CONFIG_XCOPILOT_BUGS
 	} while((rx = uart->urx.w) & URX_DATA_READY);
@@ -301,7 +316,7 @@ clear_and_exit:
 	return;
 }
 
-static void transmit_chars(struct m68k_serial *info)
+static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 
@@ -312,7 +327,7 @@ static void transmit_chars(struct m68k_serial *info)
 		goto clear_and_return;
 	}
 
-	if((info->xmit_cnt <= 0) || info->tty->stopped) {
+	if ((info->xmit_cnt <= 0) || !tty || tty->stopped) {
 		/* That's peculiar... TX ints off */
 		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
 		goto clear_and_return;
@@ -340,6 +355,7 @@ clear_and_return:
 irqreturn_t rs_interrupt(int irq, void *dev_id)
 {
 	struct m68k_serial *info = dev_id;
+	struct tty_struct *tty = tty_port_tty_get(&info->tport);
 	m68328_uart *uart;
 	unsigned short rx;
 	unsigned short tx;
@@ -350,20 +366,24 @@ irqreturn_t rs_interrupt(int irq, void *dev_id)
 #ifdef USE_INTS
 	tx = uart->utx.w;
 
-	if (rx & URX_DATA_READY) receive_chars(info, rx);
-	if (tx & UTX_TX_AVAIL)   transmit_chars(info);
+	if (rx & URX_DATA_READY)
+		receive_chars(info, tty, rx);
+	if (tx & UTX_TX_AVAIL)
+		transmit_chars(info, tty);
 #else
-	receive_chars(info, rx);		
+	receive_chars(info, tty, rx);
 #endif
+	tty_kref_put(tty);
+
 	return IRQ_HANDLED;
 }
 
-static int startup(struct m68k_serial * info)
+static int startup(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned long flags;
 	
-	if (info->flags & S_INITIALIZED)
+	if (info->tport.flags & ASYNC_INITIALIZED)
 		return 0;
 
 	if (!info->xmit_buf) {
@@ -380,7 +400,6 @@ static int startup(struct m68k_serial * info)
 	 */
 
 	uart->ustcnt = USTCNT_UEN;
-	info->xmit_fifo_size = 1;
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
 	(void)uart->urx.w;
 
@@ -394,17 +413,17 @@ static int startup(struct m68k_serial * info)
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
 #endif
 
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (tty)
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	/*
 	 * and set the speed of the serial port
 	 */
 
-	change_speed(info);
+	change_speed(info, tty);
 
-	info->flags |= S_INITIALIZED;
+	info->tport.flags |= ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 	return 0;
 }
@@ -413,13 +432,13 @@ static int startup(struct m68k_serial * info)
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct m68k_serial * info)
+static void shutdown(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned long	flags;
 
 	uart->ustcnt = 0; /* All off! */
-	if (!(info->flags & S_INITIALIZED))
+	if (!(info->tport.flags & ASYNC_INITIALIZED))
 		return;
 
 	local_irq_save(flags);
@@ -429,10 +448,10 @@ static void shutdown(struct m68k_serial * info)
 		info->xmit_buf = 0;
 	}
 
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (tty)
+		set_bit(TTY_IO_ERROR, &tty->flags);
 	
-	info->flags &= ~S_INITIALIZED;
+	info->tport.flags &= ~ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 }
 
@@ -488,7 +507,7 @@ struct {
  * This routine is called to set the UART divisor registers to match
  * the specified baud rate for a serial port.
  */
-static void change_speed(struct m68k_serial *info)
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned short port;
@@ -496,9 +515,7 @@ static void change_speed(struct m68k_serial *info)
 	unsigned cflag;
 	int	i;
 
-	if (!info->tty || !info->tty->termios)
-		return;
-	cflag = info->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 	if (!(port = info->port))
 		return;
 
@@ -510,7 +527,6 @@ static void change_speed(struct m68k_serial *info)
                 i = (i & ~CBAUDEX) + B38400;
         }
 
-	info->baud = baud_table[i];
 	uart->ubaud = PUT_FIELD(UBAUD_DIVIDE,    hw_baud_table[i].divisor) | 
 		PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
 
@@ -807,10 +823,10 @@ static int get_serial_info(struct m68k_serial * info,
 	tmp.line = info->line;
 	tmp.port = info->port;
 	tmp.irq = info->irq;
-	tmp.flags = info->flags;
+	tmp.flags = info->tport.flags;
 	tmp.baud_base = info->baud_base;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
+	tmp.close_delay = info->tport.close_delay;
+	tmp.closing_wait = info->tport.closing_wait;
 	tmp.custom_divisor = info->custom_divisor;
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -818,9 +834,10 @@ static int get_serial_info(struct m68k_serial * info,
 	return 0;
 }
 
-static int set_serial_info(struct m68k_serial * info,
+static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty,
 			   struct serial_struct * new_info)
 {
+	struct tty_port *port = &info->tport;
 	struct serial_struct new_serial;
 	struct m68k_serial old_info;
 	int 			retval = 0;
@@ -834,17 +851,17 @@ static int set_serial_info(struct m68k_serial * info,
 	if (!capable(CAP_SYS_ADMIN)) {
 		if ((new_serial.baud_base != info->baud_base) ||
 		    (new_serial.type != info->type) ||
-		    (new_serial.close_delay != info->close_delay) ||
-		    ((new_serial.flags & ~S_USR_MASK) !=
-		     (info->flags & ~S_USR_MASK)))
+		    (new_serial.close_delay != port->close_delay) ||
+		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (port->flags & ~ASYNC_USR_MASK)))
 			return -EPERM;
-		info->flags = ((info->flags & ~S_USR_MASK) |
-			       (new_serial.flags & S_USR_MASK));
+		port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+			       (new_serial.flags & ASYNC_USR_MASK));
 		info->custom_divisor = new_serial.custom_divisor;
 		goto check_and_exit;
 	}
 
-	if (info->count > 1)
+	if (port->count > 1)
 		return -EBUSY;
 
 	/*
@@ -853,14 +870,14 @@ static int set_serial_info(struct m68k_serial * info,
 	 */
 
 	info->baud_base = new_serial.baud_base;
-	info->flags = ((info->flags & ~S_FLAGS) |
-			(new_serial.flags & S_FLAGS));
+	port->flags = ((port->flags & ~ASYNC_FLAGS) |
+			(new_serial.flags & ASYNC_FLAGS));
 	info->type = new_serial.type;
-	info->close_delay = new_serial.close_delay;
-	info->closing_wait = new_serial.closing_wait;
+	port->close_delay = new_serial.close_delay;
+	port->closing_wait = new_serial.closing_wait;
 
 check_and_exit:
-	retval = startup(info);
+	retval = startup(info, tty);
 	return retval;
 }
 
@@ -946,7 +963,7 @@ static int rs_ioctl(struct tty_struct *tty,
 			return get_serial_info(info,
 				       (struct serial_struct *) arg);
 		case TIOCSSERIAL:
-			return set_serial_info(info,
+			return set_serial_info(info, tty,
 					       (struct serial_struct *) arg);
 		case TIOCSERGETLSR: /* Get line status register */
 			return get_lsr_info(info, (unsigned int *) arg);
@@ -965,7 +982,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
 	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
 
-	change_speed(info);
+	change_speed(info, tty);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
 	    !(tty->termios->c_cflag & CRTSCTS)) {
@@ -988,6 +1005,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 static void rs_close(struct tty_struct *tty, struct file * filp)
 {
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
+	struct tty_port *port = &info->tport;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned long flags;
 
@@ -1001,7 +1019,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		return;
 	}
 	
-	if ((tty->count == 1) && (info->count != 1)) {
+	if ((tty->count == 1) && (port->count != 1)) {
 		/*
 		 * Uh, oh.  tty->count is 1, which means that the tty
 		 * structure will be freed.  Info->count should always
@@ -1010,26 +1028,26 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		 * serial port won't be shutdown.
 		 */
 		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
+		       "port->count is %d\n", port->count);
+		port->count = 1;
 	}
-	if (--info->count < 0) {
+	if (--port->count < 0) {
 		printk("rs_close: bad serial port count for ttyS%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
+		       info->line, port->count);
+		port->count = 0;
 	}
-	if (info->count) {
+	if (port->count) {
 		local_irq_restore(flags);
 		return;
 	}
-	info->flags |= S_CLOSING;
+	port->flags |= ASYNC_CLOSING;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify 
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	tty->closing = 1;
-	if (info->closing_wait != S_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
+	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, port->closing_wait);
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts, and tell the
@@ -1040,13 +1058,12 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	uart->ustcnt &= ~USTCNT_RXEN;
 	uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
 
-	shutdown(info);
+	shutdown(info, tty);
 	rs_flush_buffer(tty);
 		
 	tty_ldisc_flush(tty);
 	tty->closing = 0;
-	info->event = 0;
-	info->tty = NULL;
+	tty_port_tty_set(&info->tport, NULL);
 #warning "This is not and has never been valid so fix it"	
 #if 0
 	if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1058,14 +1075,13 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 			(tty->ldisc.open)(tty);
 	}
 #endif	
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
+	if (port->blocked_open) {
+		if (port->close_delay)
+			msleep_interruptible(jiffies_to_msecs(port->close_delay));
+		wake_up_interruptible(&port->open_wait);
 	}
-	info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
-	wake_up_interruptible(&info->close_wait);
+	port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&port->close_wait);
 	local_irq_restore(flags);
 }
 
@@ -1080,107 +1096,14 @@ void rs_hangup(struct tty_struct *tty)
 		return;
 	
 	rs_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	info->count = 0;
-	info->flags &= ~S_NORMAL_ACTIVE;
-	info->tty = NULL;
-	wake_up_interruptible(&info->open_wait);
+	shutdown(info, tty);
+	info->tport.count = 0;
+	info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
+	tty_port_tty_set(&info->tport, NULL);
+	wake_up_interruptible(&info->tport.open_wait);
 }
 
 /*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   struct m68k_serial *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int		retval;
-	int		do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (info->flags & S_CLOSING) {
-		interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		if (info->flags & S_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-	
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= S_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-
-	info->count--;
-	info->blocked_open++;
-	while (1) {
-		local_irq_disable();
-		m68k_rtsdtr(info, 1);
-		local_irq_enable();
-		current->state = TASK_INTERRUPTIBLE;
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & S_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & S_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;	
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & S_CLOSING) && do_clocal)
-			break;
-                if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		info->count++;
-	info->blocked_open--;
-
-	if (retval)
-		return retval;
-	info->flags |= S_NORMAL_ACTIVE;
-	return 0;
-}	
-
-/*
  * This routine is called whenever a serial port is opened.  It
  * enables interrupts for a serial port, linking in its S structure into
  * the IRQ chain.   It also performs the serial-specific
@@ -1196,18 +1119,18 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 	if (serial_paranoia_check(info, tty->name, "rs_open"))
 		return -ENODEV;
 
-	info->count++;
+	info->tport.count++;
 	tty->driver_data = info;
-	info->tty = tty;
+	tty_port_tty_set(&info->tport, tty);
 
 	/*
 	 * Start up serial port
 	 */
-	retval = startup(info);
+	retval = startup(info, tty);
 	if (retval)
 		return retval;
 
-	return block_til_ready(tty, filp, info);
+	return tty_port_block_til_ready(&info->tport, tty, filp);
 }
 
 /* Finally, routines used to initialize the serial driver. */
@@ -1235,11 +1158,15 @@ static const struct tty_operations rs_ops = {
 	.set_ldisc = rs_set_ldisc,
 };
 
+static const struct tty_port_operations rs_port_ops = {
+};
+
 /* rs_init inits the driver */
 static int __init
 rs68328_init(void)
 {
-	int flags, i;
+	unsigned long flags;
+	int i;
 	struct m68k_serial *info;
 
 	serial_driver = alloc_tty_driver(NR_PORTS);
@@ -1273,19 +1200,13 @@ rs68328_init(void)
 	for(i=0;i<NR_PORTS;i++) {
 
 	    info = &m68k_soft[i];
+	    tty_port_init(&info->tport);
+	    info->tport.ops = &rs_port_ops;
 	    info->magic = SERIAL_MAGIC;
 	    info->port = (int) &uart_addr[i];
-	    info->tty = NULL;
 	    info->irq = uart_irqs[i];
 	    info->custom_divisor = 16;
-	    info->close_delay = 50;
-	    info->closing_wait = 3000;
 	    info->x_char = 0;
-	    info->event = 0;
-	    info->count = 0;
-	    info->blocked_open = 0;
-	    init_waitqueue_head(&info->open_wait);
-	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
 	    info->is_cons = 1; /* Means shortcuts work */
 	    
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
deleted file mode 100644
index 3d2faab..0000000
--- a/drivers/tty/serial/68328serial.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* 68328serial.h: Definitions for the mc68328 serial driver.
- *
- * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
- * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
- * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
- *
- * VZ Support/Fixes             Evan Stawnyczy <e@lineo.ca>
- */
-
-#ifndef _MC683XX_SERIAL_H
-#define _MC683XX_SERIAL_H
-
-
-struct serial_struct {
-	int	type;
-	int	line;
-	int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	reserved_char[2];
-	int	hub6;  /* FIXME: We don't have AT&T Hub6 boards! */
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	int	reserved[4];
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define S_CLOSING_WAIT_INF	0
-#define S_CLOSING_WAIT_NONE	65535
-
-/*
- * Definitions for S_struct (and serial_struct) flags field
- */
-#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-				   on the callout port */
-#define S_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
-#define S_SAK	0x0004	/* Secure Attention Key (Orange book) */
-#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define S_SPD_MASK	0x0030
-#define S_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
-
-#define S_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
-#define S_SPD_CUST	0x0030  /* Use user-specified divisor */
-
-#define S_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
-#define S_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define S_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define S_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define S_FLAGS	0x0FFF	/* Possible legal S flags */
-#define S_USR_MASK 0x0430	/* Legal flags that non-privileged
-				 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define S_INITIALIZED	0x80000000 /* Serial port was initialized */
-#define S_CALLOUT_ACTIVE	0x40000000 /* Call out device is active */
-#define S_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
-#define S_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
-#define S_CLOSING		0x08000000 /* Serial port is closing */
-#define S_CTS_FLOW		0x04000000 /* Do CTS flow control */
-#define S_CHECK_CD		0x02000000 /* i.e., CLOCAL */
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-
-/*
- * I believe this is the optimal setting that reduces the number of interrupts.
- * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
- * if that bothers you), but in most cases it will not, since we try to 
- * transmit characters every time rs_interrupt is called. Thus, quite often
- * you'll see that a receive interrupt occures before the transmit one.
- *                                  -- Vladimir Gurevich
- */
-#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
-
-/*
- * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
- * "Old data interrupt" which occures whenever the data stay in the FIFO
- * longer than 30 bits time. This allows us to use FIFO without compromising
- * latency. '328 does not have this feature and without the real  328-based
- * board I would assume that RXRE is the safest setting.
- *
- * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
- * interrupts. RXFE (receive queue full) causes the system to lose data
- * at least at 115200 baud
- *
- * If your board is busy doing other stuff, you might consider to use
- * RXRE (data ready intrrupt) instead.
- *
- * The other option is to make these INTR masks run-time configurable, so
- * that people can dynamically adapt them according to the current usage.
- *                                  -- Vladimir Gurevich
- */
-
-/* (es) */
-#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
-#elif defined(CONFIG_M68328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
-#else
-#error Please, define the Rx interrupt events for your CPU
-#endif
-/* (/es) */
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct m68k_serial {
-	char soft_carrier;  /* Use soft carrier on this channel */
-	char break_abort;   /* Is serial console in, so process brk/abrt */
-	char is_cons;       /* Is this our console. */
-
-	/* We need to know the current clock divisor
-	 * to read the bps rate the chip has currently
-	 * loaded.
-	 */
-	unsigned char clk_divisor;  /* May be 1, 16, 32, or 64 */
-	int baud;
-	int			magic;
-	int			baud_base;
-	int			port;
-	int			irq;
-	int			flags; 		/* defined in tty.h */
-	int			type; 		/* UART type */
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int			custom_divisor;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	unsigned long		last_active;
-	int			line;
-	int			count;	    /* # of fd on device */
-	int			blocked_open; /* # of blocked opens */
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-};
-
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE 4096
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP	0
-
-/* 
- * Define the number of ports supported and their irqs.
- */
-#define NR_PORTS 1
-#define UART_IRQ_DEFNS {UART_IRQ_NUM}
-
-#endif /* __KERNEL__ */
-#endif /* !(_MC683XX_SERIAL_H) */
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 5c27f7e..182efcc9 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -568,6 +568,16 @@ static void serial8250_clear_fifos(struct uart_8250_port *p)
 	}
 }
 
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
+{
+	unsigned char fcr;
+
+	serial8250_clear_fifos(p);
+	fcr = uart_config[p->port.type].fcr;
+	serial_out(p, UART_FCR, fcr);
+}
+EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
+
 /*
  * IER sleep support.  UARTs which have EFRs need the "extended
  * capability" bit enabled.  Note that on XR16C850s, we need to
@@ -1332,27 +1342,6 @@ static void serial8250_enable_ms(struct uart_port *port)
 }
 
 /*
- * Clear the Tegra rx fifo after a break
- *
- * FIXME: This needs to become a port specific callback once we have a
- * framework for this
- */
-static void clear_rx_fifo(struct uart_8250_port *up)
-{
-	unsigned int status, tmout = 10000;
-	do {
-		status = serial_in(up, UART_LSR);
-		if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
-			status = serial_in(up, UART_RX);
-		else
-			break;
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while (1);
-}
-
-/*
  * serial8250_rx_chars: processes according to the passed in LSR
  * value, and returns the remaining LSR bits not handled
  * by this Rx routine.
@@ -1386,20 +1375,10 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
 		up->lsr_saved_flags = 0;
 
 		if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
-			/*
-			 * For statistics only
-			 */
 			if (lsr & UART_LSR_BI) {
 				lsr &= ~(UART_LSR_FE | UART_LSR_PE);
 				port->icount.brk++;
 				/*
-				 * If tegra port then clear the rx fifo to
-				 * accept another break/character.
-				 */
-				if (port->type == PORT_TEGRA)
-					clear_rx_fifo(up);
-
-				/*
 				 * We do the SysRQ and SAK checking
 				 * here because otherwise the break
 				 * may get masked by ignore_status_mask
@@ -3037,6 +3016,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.serial_in		= p->serial_in;
 		port.serial_out		= p->serial_out;
 		port.handle_irq		= p->handle_irq;
+		port.handle_break	= p->handle_break;
 		port.set_termios	= p->set_termios;
 		port.pm			= p->pm;
 		port.dev		= &dev->dev;
@@ -3209,6 +3189,8 @@ int serial8250_register_port(struct uart_port *port)
 			uart->port.set_termios = port->set_termios;
 		if (port->pm)
 			uart->port.pm = port->pm;
+		if (port->handle_break)
+			uart->port.handle_break = port->handle_break;
 
 		if (serial8250_isa_config != NULL)
 			serial8250_isa_config(0, &uart->port,
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 2868a1d..c9d0ebe 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -96,6 +96,8 @@ static inline void serial_out(struct uart_8250_port *up, int offset, int value)
 	up->port.serial_out(&up->port, offset, value);
 }
 
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
+
 #if defined(__alpha__) && !defined(CONFIG_PCI)
 /*
  * Digital did something really horribly wrong with the OUT1 and OUT2
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 858dca8..24ea98c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/tty.h>
+#include <linux/serial_reg.h>
 #include <linux/serial_core.h>
 #include <linux/8250_pci.h>
 #include <linux/bitops.h>
@@ -1092,11 +1093,49 @@ static int skip_tx_en_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
+static void kt_handle_break(struct uart_port *p)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+	/*
+	 * On receipt of a BI, serial device in Intel ME (Intel
+	 * management engine) needs to have its fifos cleared for sane
+	 * SOL (Serial Over Lan) output.
+	 */
+	serial8250_clear_and_reinit_fifos(up);
+}
+
+static unsigned int kt_serial_in(struct uart_port *p, int offset)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+	unsigned int val;
+
+	/*
+	 * When the Intel ME (management engine) gets reset its serial
+	 * port registers could return 0 momentarily.  Functions like
+	 * serial8250_console_write, read and save the IER, perform
+	 * some operation and then restore it.  In order to avoid
+	 * setting IER register inadvertently to 0, if the value read
+	 * is 0, double check with ier value in uart_8250_port and use
+	 * that instead.  up->ier should be the same value as what is
+	 * currently configured.
+	 */
+	val = inb(p->iobase + offset);
+	if (offset == UART_IER) {
+		if (val == 0)
+			val = up->ier;
+	}
+	return val;
+}
+
 static int kt_serial_setup(struct serial_private *priv,
 			   const struct pciserial_board *board,
 			   struct uart_port *port, int idx)
 {
 	port->flags |= UPF_BUG_THRE;
+	port->serial_in = kt_serial_in;
+	port->handle_break = kt_handle_break;
 	return skip_tx_en_setup(priv, board, port, idx);
 }
 
@@ -2775,6 +2814,12 @@ void pciserial_suspend_ports(struct serial_private *priv)
 	for (i = 0; i < priv->nr; i++)
 		if (priv->line[i] >= 0)
 			serial8250_suspend_port(priv->line[i]);
+
+	/*
+	 * Ensure that every init quirk is properly torn down
+	 */
+	if (priv->quirk->exit)
+		priv->quirk->exit(priv->dev);
 }
 EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
 
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3d569cd..2d13914 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -67,30 +67,6 @@
 #define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
 #define UART_DUMMY_DR_RX	(1 << 16)
 
-
-#define UART_WA_SAVE_NR 14
-
-static void pl011_lockup_wa(unsigned long data);
-static const u32 uart_wa_reg[UART_WA_SAVE_NR] = {
-	ST_UART011_DMAWM,
-	ST_UART011_TIMEOUT,
-	ST_UART011_LCRH_RX,
-	UART011_IBRD,
-	UART011_FBRD,
-	ST_UART011_LCRH_TX,
-	UART011_IFLS,
-	ST_UART011_XFCR,
-	ST_UART011_XON1,
-	ST_UART011_XON2,
-	ST_UART011_XOFF1,
-	ST_UART011_XOFF2,
-	UART011_CR,
-	UART011_IMSC
-};
-
-static u32 uart_wa_regdata[UART_WA_SAVE_NR];
-static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0);
-
 /* There is by now at least one vendor with differing details, so handle it */
 struct vendor_data {
 	unsigned int		ifls;
@@ -100,6 +76,7 @@ struct vendor_data {
 	bool			oversampling;
 	bool			interrupt_may_hang;   /* vendor-specific */
 	bool			dma_threshold;
+	bool			cts_event_workaround;
 };
 
 static struct vendor_data vendor_arm = {
@@ -109,6 +86,7 @@ static struct vendor_data vendor_arm = {
 	.lcrh_rx		= UART011_LCRH,
 	.oversampling		= false,
 	.dma_threshold		= false,
+	.cts_event_workaround	= false,
 };
 
 static struct vendor_data vendor_st = {
@@ -119,6 +97,7 @@ static struct vendor_data vendor_st = {
 	.oversampling		= true,
 	.interrupt_may_hang	= true,
 	.dma_threshold		= true,
+	.cts_event_workaround	= true,
 };
 
 static struct uart_amba_port *amba_ports[UART_NR];
@@ -1054,69 +1033,6 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
 #define pl011_dma_flush_buffer	NULL
 #endif
 
-
-/*
- * pl011_lockup_wa
- * This workaround aims to break the deadlock situation
- * when after long transfer over uart in hardware flow
- * control, uart interrupt registers cannot be cleared.
- * Hence uart transfer gets blocked.
- *
- * It is seen that during such deadlock condition ICR
- * don't get cleared even on multiple write. This leads
- * pass_counter to decrease and finally reach zero. This
- * can be taken as trigger point to run this UART_BT_WA.
- *
- */
-static void pl011_lockup_wa(unsigned long data)
-{
-	struct uart_amba_port *uap = amba_ports[0];
-	void __iomem *base = uap->port.membase;
-	struct circ_buf *xmit = &uap->port.state->xmit;
-	struct tty_struct *tty = uap->port.state->port.tty;
-	int buf_empty_retries = 200;
-	int loop;
-
-	/* Stop HCI layer from submitting data for tx */
-	tty->hw_stopped = 1;
-	while (!uart_circ_empty(xmit)) {
-		if (buf_empty_retries-- == 0)
-			break;
-		udelay(100);
-	}
-
-	/* Backup registers */
-	for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
-		uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]);
-
-	/* Disable UART so that FIFO data is flushed out */
-	writew(0x00, uap->port.membase + UART011_CR);
-
-	/* Soft reset UART module */
-	if (uap->port.dev->platform_data) {
-		struct amba_pl011_data *plat;
-
-		plat = uap->port.dev->platform_data;
-		if (plat->reset)
-			plat->reset();
-	}
-
-	/* Restore registers */
-	for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
-		writew(uart_wa_regdata[loop] ,
-				uap->port.membase + uart_wa_reg[loop]);
-
-	/* Initialise the old status of the modem signals */
-	uap->old_status = readw(uap->port.membase + UART01x_FR) &
-		UART01x_FR_MODEM_ANY;
-
-	if (readl(base + UART011_MIS) & 0x2)
-		printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n");
-
-	/* Start Tx/Rx */
-	tty->hw_stopped = 0;
-}
-
 static void pl011_stop_tx(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1245,12 +1161,26 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 	unsigned long flags;
 	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
 	int handled = 0;
+	unsigned int dummy_read;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 
 	status = readw(uap->port.membase + UART011_MIS);
 	if (status) {
 		do {
+			if (uap->vendor->cts_event_workaround) {
+				/* workaround to make sure that all bits are unlocked.. */
+				writew(0x00, uap->port.membase + UART011_ICR);
+
+				/*
+				 * WA: introduce 26ns(1 uart clk) delay before W1C;
+				 * single apb access will incur 2 pclk(133.12Mhz) delay,
+				 * so add 2 dummy reads
+				 */
+				dummy_read = readw(uap->port.membase + UART011_ICR);
+				dummy_read = readw(uap->port.membase + UART011_ICR);
+			}
+
 			writew(status & ~(UART011_TXIS|UART011_RTIS|
 					  UART011_RXIS),
 			       uap->port.membase + UART011_ICR);
@@ -1267,11 +1197,8 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 			if (status & UART011_TXIS)
 				pl011_tx_chars(uap);
 
-			if (pass_counter-- == 0) {
-				if (uap->interrupt_may_hang)
-					tasklet_schedule(&pl011_lockup_tlet);
+			if (pass_counter-- == 0)
 				break;
-			}
 
 			status = readw(uap->port.membase + UART011_MIS);
 		} while (status != 0);
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 5b07c0c..80b6b1b 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -952,19 +952,6 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 /* Input */
 #define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask)
 
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write.  We need to
- * lock it in case the memcpy_fromfs blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *tmp_buf;
-static DEFINE_MUTEX(tmp_buf_mutex);
-
 /* Calculate the chartime depending on baudrate, numbor of bits etc. */
 static void update_char_time(struct e100_serial * info)
 {
@@ -3150,7 +3137,7 @@ static int rs_raw_write(struct tty_struct *tty,
 
 	/* first some sanity checks */
 
-	if (!tty || !info->xmit.buf || !tmp_buf)
+	if (!tty || !info->xmit.buf)
 		return 0;
 
 #ifdef SERIAL_DEBUG_DATA
@@ -4106,7 +4093,6 @@ rs_open(struct tty_struct *tty, struct file * filp)
 {
 	struct e100_serial	*info;
 	int 			retval;
-	unsigned long           page;
 	int                     allocated_resources = 0;
 
 	info = rs_table + tty->index;
@@ -4124,17 +4110,6 @@ rs_open(struct tty_struct *tty, struct file * filp)
 
 	tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
 
-	if (!tmp_buf) {
-		page = get_zeroed_page(GFP_KERNEL);
-		if (!page) {
-			return -ENOMEM;
-		}
-		if (tmp_buf)
-			free_page(page);
-		else
-			tmp_buf = (unsigned char *) page;
-	}
-
 	/*
 	 * If the port is in the middle of closing, bail out now
 	 */
@@ -4487,6 +4462,7 @@ static int __init rs_init(void)
 				info->enabled = 0;
 			}
 		}
+		tty_port_init(&info->port);
 		info->uses_dma_in = 0;
 		info->uses_dma_out = 0;
 		info->line = i;
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e8c9cee..5410c06 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -12,10 +12,13 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/of_serial.h>
 #include <linux/of_platform.h>
 #include <linux/nwpserial.h>
 
@@ -24,6 +27,26 @@ struct of_serial_info {
 	int line;
 };
 
+#ifdef CONFIG_ARCH_TEGRA
+void tegra_serial_handle_break(struct uart_port *p)
+{
+	unsigned int status, tmout = 10000;
+
+	do {
+		status = p->serial_in(p, UART_LSR);
+		if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
+			status = p->serial_in(p, UART_RX);
+		else
+			break;
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (1);
+}
+/* FIXME remove this export when tegra finishes conversion to open firmware */
+EXPORT_SYMBOL_GPL(tegra_serial_handle_break);
+#endif
+
 /*
  * Fill a struct uart_port for a given device node
  */
@@ -84,6 +107,9 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	port->dev = &ofdev->dev;
 
+	if (type == PORT_TEGRA)
+		port->handle_break = tegra_serial_handle_break;
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d00b38e..d3cda0c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -44,6 +44,13 @@
 #include <plat/dmtimer.h>
 #include <plat/omap-serial.h>
 
+#define UART_BUILD_REVISION(x, y)	(((x) << 8) | (y))
+
+#define OMAP_UART_REV_42 0x0402
+#define OMAP_UART_REV_46 0x0406
+#define OMAP_UART_REV_52 0x0502
+#define OMAP_UART_REV_63 0x0603
+
 #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
 
 /* SCR register bitmasks */
@@ -53,6 +60,17 @@
 #define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT		6
 #define OMAP_UART_FCR_RX_FIFO_TRIG_MASK			(0x3 << 6)
 
+/* MVR register bitmasks */
+#define OMAP_UART_MVR_SCHEME_SHIFT	30
+
+#define OMAP_UART_LEGACY_MVR_MAJ_MASK	0xf0
+#define OMAP_UART_LEGACY_MVR_MAJ_SHIFT	4
+#define OMAP_UART_LEGACY_MVR_MIN_MASK	0x0f
+
+#define OMAP_UART_MVR_MAJ_MASK		0x700
+#define OMAP_UART_MVR_MAJ_SHIFT		8
+#define OMAP_UART_MVR_MIN_MASK		0x3f
+
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 
 /* Forward declaration of functions */
@@ -1346,6 +1364,59 @@ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
 	return;
 }
 
+static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
+{
+	u32 mvr, scheme;
+	u16 revision, major, minor;
+
+	mvr = serial_in(up, UART_OMAP_MVER);
+
+	/* Check revision register scheme */
+	scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT;
+
+	switch (scheme) {
+	case 0: /* Legacy Scheme: OMAP2/3 */
+		/* MINOR_REV[0:4], MAJOR_REV[4:7] */
+		major = (mvr & OMAP_UART_LEGACY_MVR_MAJ_MASK) >>
+					OMAP_UART_LEGACY_MVR_MAJ_SHIFT;
+		minor = (mvr & OMAP_UART_LEGACY_MVR_MIN_MASK);
+		break;
+	case 1:
+		/* New Scheme: OMAP4+ */
+		/* MINOR_REV[0:5], MAJOR_REV[8:10] */
+		major = (mvr & OMAP_UART_MVR_MAJ_MASK) >>
+					OMAP_UART_MVR_MAJ_SHIFT;
+		minor = (mvr & OMAP_UART_MVR_MIN_MASK);
+		break;
+	default:
+		dev_warn(&up->pdev->dev,
+			"Unknown %s revision, defaulting to highest\n",
+			up->name);
+		/* highest possible revision */
+		major = 0xff;
+		minor = 0xff;
+	}
+
+	/* normalize revision for the driver */
+	revision = UART_BUILD_REVISION(major, minor);
+
+	switch (revision) {
+	case OMAP_UART_REV_46:
+		up->errata |= (UART_ERRATA_i202_MDR1_ACCESS |
+				UART_ERRATA_i291_DMA_FORCEIDLE);
+		break;
+	case OMAP_UART_REV_52:
+		up->errata |= (UART_ERRATA_i202_MDR1_ACCESS |
+				UART_ERRATA_i291_DMA_FORCEIDLE);
+		break;
+	case OMAP_UART_REV_63:
+		up->errata |= UART_ERRATA_i202_MDR1_ACCESS;
+		break;
+	default:
+		break;
+	}
+}
+
 static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
 {
 	struct omap_uart_port_info *omap_up_info;
@@ -1439,7 +1510,6 @@ static int serial_omap_probe(struct platform_device *pdev)
 						"%d\n", DEFAULT_CLK_SPEED);
 	}
 	up->uart_dma.uart_base = mem->start;
-	up->errata = omap_up_info->errata;
 
 	if (omap_up_info->dma_enabled) {
 		up->uart_dma.uart_dma_tx = dma_tx->start;
@@ -1469,6 +1539,8 @@ static int serial_omap_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
+	omap_serial_fill_features_erratas(up);
+
 	ui[up->port.line] = up;
 	serial_omap_add_console_port(up);
 
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index c2816f4..4fdec6a6 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -39,6 +39,7 @@ enum {
 	PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
 	PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
 	PCH_UART_HANDLED_MS_INT_SHIFT,
+	PCH_UART_HANDLED_LS_INT_SHIFT,
 };
 
 enum {
@@ -63,6 +64,8 @@ enum {
 					PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
 #define PCH_UART_HANDLED_MS_INT	(1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
 
+#define PCH_UART_HANDLED_LS_INT	(1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
+
 #define PCH_UART_RBR		0x00
 #define PCH_UART_THR		0x00
 
@@ -229,7 +232,6 @@ struct eg20t_port {
 	int start_tx;
 	int start_rx;
 	int tx_empty;
-	int int_dis_flag;
 	int trigger;
 	int trigger_level;
 	struct pch_uart_buffer rxbuf;
@@ -237,7 +239,6 @@ struct eg20t_port {
 	unsigned int fcr;
 	unsigned int mcr;
 	unsigned int use_dma;
-	unsigned int use_dma_flag;
 	struct dma_async_tx_descriptor	*desc_tx;
 	struct dma_async_tx_descriptor	*desc_rx;
 	struct pch_dma_slave		param_tx;
@@ -560,14 +561,10 @@ static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
 	return i;
 }
 
-static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv)
+static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
 {
-	unsigned int iir;
-	int ret;
-
-	iir = ioread8(priv->membase + UART_IIR);
-	ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP));
-	return ret;
+	return ioread8(priv->membase + UART_IIR) &\
+		      (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
 }
 
 static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
@@ -666,10 +663,13 @@ static void pch_free_dma(struct uart_port *port)
 		dma_release_channel(priv->chan_rx);
 		priv->chan_rx = NULL;
 	}
-	if (sg_dma_address(&priv->sg_rx))
-		dma_free_coherent(port->dev, port->fifosize,
-				  sg_virt(&priv->sg_rx),
-				  sg_dma_address(&priv->sg_rx));
+
+	if (priv->rx_buf_dma) {
+		dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
+				  priv->rx_buf_dma);
+		priv->rx_buf_virt = NULL;
+		priv->rx_buf_dma = 0;
+	}
 
 	return;
 }
@@ -1053,12 +1053,17 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 	unsigned int handled;
 	u8 lsr;
 	int ret = 0;
-	unsigned int iid;
+	unsigned char iid;
 	unsigned long flags;
+	int next = 1;
+	u8 msr;
 
 	spin_lock_irqsave(&priv->port.lock, flags);
 	handled = 0;
-	while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
+	while (next) {
+		iid = pch_uart_hal_get_iid(priv);
+		if (iid & PCH_UART_IIR_IP) /* No Interrupt */
+			break;
 		switch (iid) {
 		case PCH_UART_IID_RLS:	/* Receiver Line Status */
 			lsr = pch_uart_hal_get_line_status(priv);
@@ -1066,6 +1071,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 						UART_LSR_PE | UART_LSR_OE)) {
 				pch_uart_err_ir(priv, lsr);
 				ret = PCH_UART_HANDLED_RX_ERR_INT;
+			} else {
+				ret = PCH_UART_HANDLED_LS_INT;
 			}
 			break;
 		case PCH_UART_IID_RDR:	/* Received Data Ready */
@@ -1092,20 +1099,22 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 				ret = handle_tx(priv);
 			break;
 		case PCH_UART_IID_MS:	/* Modem Status */
-			ret = PCH_UART_HANDLED_MS_INT;
+			msr = pch_uart_hal_get_modem(priv);
+			next = 0; /* MS ir prioirty is the lowest. So, MS ir
+				     means final interrupt */
+			if ((msr & UART_MSR_ANY_DELTA) == 0)
+				break;
+			ret |= PCH_UART_HANDLED_MS_INT;
 			break;
 		default:	/* Never junp to this label */
-			dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
+			dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
 				iid, jiffies);
 			ret = -1;
+			next = 0;
 			break;
 		}
 		handled |= (unsigned int)ret;
 	}
-	if (handled == 0 && iid <= 1) {
-		if (priv->int_dis_flag)
-			priv->int_dis_flag = 0;
-	}
 
 	spin_unlock_irqrestore(&priv->port.lock, flags);
 	return IRQ_RETVAL(handled);
@@ -1200,7 +1209,6 @@ static void pch_uart_stop_rx(struct uart_port *port)
 	priv = container_of(port, struct eg20t_port, port);
 	priv->start_rx = 0;
 	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
-	priv->int_dis_flag = 1;
 }
 
 /* Enable the modem status interrupts. */
@@ -1447,7 +1455,6 @@ static int pch_uart_verify_port(struct uart_port *port,
 			__func__);
 		return -EOPNOTSUPP;
 #endif
-		priv->use_dma_flag = 1;
 		dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
 		if (!priv->use_dma)
 			pch_request_dma(port);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 6c9b7cd..91e326f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -185,25 +185,19 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 	/* Should possibly check if this fails for the largest buffer we
 	   have queued and recycle that ? */
 }
-
 /**
- *	tty_buffer_request_room		-	grow tty buffer if needed
+ *	__tty_buffer_request_room		-	grow tty buffer if needed
  *	@tty: tty structure
  *	@size: size desired
  *
  *	Make at least size bytes of linear space available for the tty
  *	buffer. If we fail return the size we managed to find.
- *
- *	Locking: Takes tty->buf.lock
+ *      Locking: Caller must hold tty->buf.lock
  */
-int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
 {
 	struct tty_buffer *b, *n;
 	int left;
-	unsigned long flags;
-
-	spin_lock_irqsave(&tty->buf.lock, flags);
-
 	/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
 	   remove this conditional if its worth it. This would be invisible
 	   to the callers */
@@ -225,9 +219,30 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size)
 			size = left;
 	}
 
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
 	return size;
 }
+
+
+/**
+ *	tty_buffer_request_room		-	grow tty buffer if needed
+ *	@tty: tty structure
+ *	@size: size desired
+ *
+ *	Make at least size bytes of linear space available for the tty
+ *	buffer. If we fail return the size we managed to find.
+ *
+ *	Locking: Takes tty->buf.lock
+ */
+int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+{
+	unsigned long flags;
+	int length;
+
+	spin_lock_irqsave(&tty->buf.lock, flags);
+	length = __tty_buffer_request_room(tty, size);
+	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	return length;
+}
 EXPORT_SYMBOL_GPL(tty_buffer_request_room);
 
 /**
@@ -249,14 +264,22 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
-		int space = tty_buffer_request_room(tty, goal);
-		struct tty_buffer *tb = tty->buf.tail;
+		int space;
+		unsigned long flags;
+		struct tty_buffer *tb;
+
+		spin_lock_irqsave(&tty->buf.lock, flags);
+		space = __tty_buffer_request_room(tty, goal);
+		tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
-		if (unlikely(space == 0))
+		if (unlikely(space == 0)) {
+			spin_unlock_irqrestore(&tty->buf.lock, flags);
 			break;
+		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memset(tb->flag_buf_ptr + tb->used, flag, space);
 		tb->used += space;
+		spin_unlock_irqrestore(&tty->buf.lock, flags);
 		copied += space;
 		chars += space;
 		/* There is a small chance that we need to split the data over
@@ -286,14 +309,22 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
-		int space = tty_buffer_request_room(tty, goal);
-		struct tty_buffer *tb = tty->buf.tail;
+		int space;
+		unsigned long __flags;
+		struct tty_buffer *tb;
+
+		spin_lock_irqsave(&tty->buf.lock, __flags);
+		space = __tty_buffer_request_room(tty, goal);
+		tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
-		if (unlikely(space == 0))
+		if (unlikely(space == 0)) {
+			spin_unlock_irqrestore(&tty->buf.lock, __flags);
 			break;
+		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memcpy(tb->flag_buf_ptr + tb->used, flags, space);
 		tb->used += space;
+		spin_unlock_irqrestore(&tty->buf.lock, __flags);
 		copied += space;
 		chars += space;
 		flags += space;
@@ -344,13 +375,20 @@ EXPORT_SYMBOL(tty_schedule_flip);
 int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
 								size_t size)
 {
-	int space = tty_buffer_request_room(tty, size);
+	int space;
+	unsigned long flags;
+	struct tty_buffer *tb;
+
+	spin_lock_irqsave(&tty->buf.lock, flags);
+	space = __tty_buffer_request_room(tty, size);
+
+	tb = tty->buf.tail;
 	if (likely(space)) {
-		struct tty_buffer *tb = tty->buf.tail;
 		*chars = tb->char_buf_ptr + tb->used;
 		memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
 		tb->used += space;
 	}
+	spin_unlock_irqrestore(&tty->buf.lock, flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -374,13 +412,20 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
 int tty_prepare_flip_string_flags(struct tty_struct *tty,
 			unsigned char **chars, char **flags, size_t size)
 {
-	int space = tty_buffer_request_room(tty, size);
+	int space;
+	unsigned long __flags;
+	struct tty_buffer *tb;
+
+	spin_lock_irqsave(&tty->buf.lock, __flags);
+	space = __tty_buffer_request_room(tty, size);
+
+	tb = tty->buf.tail;
 	if (likely(space)) {
-		struct tty_buffer *tb = tty->buf.tail;
 		*chars = tb->char_buf_ptr + tb->used;
 		*flags = tb->flag_buf_ptr + tb->used;
 		tb->used += space;
 	}
+	spin_unlock_irqrestore(&tty->buf.lock, __flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 2156188..84cbf29 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3892,36 +3892,6 @@ static void set_palette(struct vc_data *vc)
 		vc->vc_sw->con_set_palette(vc, color_table);
 }
 
-static int set_get_cmap(unsigned char __user *arg, int set)
-{
-    int i, j, k;
-
-    WARN_CONSOLE_UNLOCKED();
-
-    for (i = 0; i < 16; i++)
-	if (set) {
-	    get_user(default_red[i], arg++);
-	    get_user(default_grn[i], arg++);
-	    get_user(default_blu[i], arg++);
-	} else {
-	    put_user(default_red[i], arg++);
-	    put_user(default_grn[i], arg++);
-	    put_user(default_blu[i], arg++);
-	}
-    if (set) {
-	for (i = 0; i < MAX_NR_CONSOLES; i++)
-	    if (vc_cons_allocated(i)) {
-		for (j = k = 0; j < 16; j++) {
-		    vc_cons[i].d->vc_palette[k++] = default_red[j];
-		    vc_cons[i].d->vc_palette[k++] = default_grn[j];
-		    vc_cons[i].d->vc_palette[k++] = default_blu[j];
-		}
-		set_palette(vc_cons[i].d);
-	    }
-    }
-    return 0;
-}
-
 /*
  * Load palette into the DAC registers. arg points to a colour
  * map, 3 bytes per colour, 16 colours, range from 0 to 255.
@@ -3929,24 +3899,50 @@ static int set_get_cmap(unsigned char __user *arg, int set)
 
 int con_set_cmap(unsigned char __user *arg)
 {
-	int rc;
+	int i, j, k;
+	unsigned char colormap[3*16];
+
+	if (copy_from_user(colormap, arg, sizeof(colormap)))
+		return -EFAULT;
 
 	console_lock();
-	rc = set_get_cmap (arg,1);
+	for (i = k = 0; i < 16; i++) {
+		default_red[i] = colormap[k++];
+		default_grn[i] = colormap[k++];
+		default_blu[i] = colormap[k++];
+	}
+	for (i = 0; i < MAX_NR_CONSOLES; i++) {
+		if (!vc_cons_allocated(i))
+			continue;
+		for (j = k = 0; j < 16; j++) {
+			vc_cons[i].d->vc_palette[k++] = default_red[j];
+			vc_cons[i].d->vc_palette[k++] = default_grn[j];
+			vc_cons[i].d->vc_palette[k++] = default_blu[j];
+		}
+		set_palette(vc_cons[i].d);
+	}
 	console_unlock();
 
-	return rc;
+	return 0;
 }
 
 int con_get_cmap(unsigned char __user *arg)
 {
-	int rc;
+	int i, k;
+	unsigned char colormap[3*16];
 
 	console_lock();
-	rc = set_get_cmap (arg,0);
+	for (i = k = 0; i < 16; i++) {
+		colormap[k++] = default_red[i];
+		colormap[k++] = default_grn[i];
+		colormap[k++] = default_blu[i];
+	}
 	console_unlock();
 
-	return rc;
+	if (copy_to_user(arg, colormap, sizeof(colormap)))
+		return -EFAULT;
+
+	return 0;
 }
 
 void reset_palette(struct vc_data *vc)