summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-28 18:50:24 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-28 18:50:24 -0800
commit2ad48ee810335bdd99de96e1a0796ba34c0e8301 (patch)
tree23fb16423129a22e3e866005883b4f461aadcd84 /drivers/tty
parentd30492adea3a82e7120bcf60893aaaab711f90a6 (diff)
parent4fbd269f1f9f8020dd9474b60e55c4f34d267b08 (diff)
downloadop-kernel-dev-2ad48ee810335bdd99de96e1a0796ba34c0e8301.zip
op-kernel-dev-2ad48ee810335bdd99de96e1a0796ba34c0e8301.tar.gz
Merge tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial fixes from Greg KH: "Here are tiny and assorted serial driver fixes that have been in a branch in my tree for a while and somehow did not get properly merged into my big TTY / Serial pull request for 3.14-rc1. Sorry about that. All have been in linux-next for a while with no issues" * tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: xuartps: Properly guard sysrq specific code serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip serial: icom: dereference after free in load_code() serial: 8250_dw: add new ACPI IDs tty: serial: pch: don't crash if DMA enabled but not loaded serial: samsung: move clock deactivation below uart registration
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/icom.c4
-rw-r--r--drivers/tty/serial/pch_uart.c10
-rw-r--r--drivers/tty/serial/samsung.c8
3 files changed, 16 insertions, 6 deletions
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index d98e433..6742380 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -455,11 +455,11 @@ static void load_code(struct icom_port *icom_port)
for (index = 0; index < fw->size; index++)
new_page[index] = fw->data[index];
- release_firmware(fw);
-
writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length);
writel(temp_pci, &icom_port->dram->mac_load_addr);
+ release_firmware(fw);
+
/*Setting the syncReg to 0x80 causes adapter to start downloading
the personality code into adapter instruction RAM.
Once code is loaded, it will begin executing and, based on
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 9cbd3ac..8fa1134 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1508,10 +1508,14 @@ static int pch_uart_verify_port(struct uart_port *port,
__func__);
return -EOPNOTSUPP;
#endif
- dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
- if (!priv->use_dma)
+ if (!priv->use_dma) {
pch_request_dma(port);
- priv->use_dma = 1;
+ if (priv->chan_rx)
+ priv->use_dma = 1;
+ }
+ dev_info(priv->port.dev, "PCH UART: %s\n",
+ priv->use_dma ?
+ "Use DMA Mode" : "No DMA");
}
return 0;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index c1af04d..9cd706d 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1209,7 +1209,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
/* reset the fifos (and setup the uart) */
s3c24xx_serial_resetport(port, cfg);
- clk_disable_unprepare(ourport->clk);
return 0;
}
@@ -1287,6 +1286,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
platform_set_drvdata(pdev, &ourport->port);
+ /*
+ * Deactivate the clock enabled in s3c24xx_serial_init_port here,
+ * so that a potential re-enablement through the pm-callback overlaps
+ * and keeps the clock enabled in this case.
+ */
+ clk_disable_unprepare(ourport->clk);
+
#ifdef CONFIG_SAMSUNG_CLOCK
ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
if (ret < 0)
OpenPOWER on IntegriCloud