summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@linaro.org>2011-06-25 02:04:33 +0800
committerShawn Guo <shawn.guo@linaro.org>2011-07-27 09:30:38 +0800
commitfe6b540ac033be6e9fa00dab1c8902dea0ad4016 (patch)
treeb71e37f03ba8e35667a1128b0d0356b46c6597b3 /drivers/tty
parentb0189cd087aa82bd23277cb5c8960ab030e13e5c (diff)
downloadop-kernel-dev-fe6b540ac033be6e9fa00dab1c8902dea0ad4016.zip
op-kernel-dev-fe6b540ac033be6e9fa00dab1c8902dea0ad4016.tar.gz
serial/imx: get rid of the uses of cpu_is_mx1()
The patch removes all the uses of cpu_is_mx1(). Instead, it uses the .id_table of platform_driver to distinguish the uart device type, IMX1_UART and IMX21_UART. The IMX21_UART type runs on all i.mx except i.mx1. A couple of !cpu_is_mx1 logic gets turned into is_imx21_uart, as the codes wrapped there are really IMX21 type uart specific. It also removes macro MX1_UCR3_REF25 and MX1_UCR3_REF30 which are not used anywhere. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/imx.c85
1 files changed, 69 insertions, 16 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 22fe801..2d5eac2 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -48,7 +48,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
#include <mach/imx-uart.h>
/* Register definitions */
@@ -66,8 +65,9 @@
#define UBIR 0xa4 /* BRM Incremental Register */
#define UBMR 0xa8 /* BRM Modulator Register */
#define UBRC 0xac /* Baud Rate Count Register */
-#define MX2_ONEMS 0xb0 /* One Millisecond register */
-#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
+#define IMX21_ONEMS 0xb0 /* One Millisecond register */
+#define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
+#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
/* UART Control Register Bit Fields.*/
#define URXD_CHARRDY (1<<15)
@@ -87,7 +87,7 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */
+#define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
@@ -113,9 +113,7 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
-#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
-#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
@@ -181,6 +179,18 @@
#define UART_NR 8
+/* i.mx21 type uart runs on all i.mx except i.mx1 */
+enum imx_uart_type {
+ IMX1_UART,
+ IMX21_UART,
+};
+
+/* device type dependent stuff */
+struct imx_uart_data {
+ unsigned uts_reg;
+ enum imx_uart_type devtype;
+};
+
struct imx_port {
struct uart_port port;
struct timer_list timer;
@@ -192,6 +202,7 @@ struct imx_port {
unsigned int irda_inv_tx:1;
unsigned short trcv_delay; /* transceiver delay */
struct clk *clk;
+ struct imx_uart_data *devdata;
};
#ifdef CONFIG_IRDA
@@ -200,6 +211,45 @@ struct imx_port {
#define USE_IRDA(sport) (0)
#endif
+static struct imx_uart_data imx_uart_devdata[] = {
+ [IMX1_UART] = {
+ .uts_reg = IMX1_UTS,
+ .devtype = IMX1_UART,
+ },
+ [IMX21_UART] = {
+ .uts_reg = IMX21_UTS,
+ .devtype = IMX21_UART,
+ },
+};
+
+static struct platform_device_id imx_uart_devtype[] = {
+ {
+ .name = "imx1-uart",
+ .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
+ }, {
+ .name = "imx21-uart",
+ .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
+
+static inline unsigned uts_reg(struct imx_port *sport)
+{
+ return sport->devdata->uts_reg;
+}
+
+static inline int is_imx1_uart(struct imx_port *sport)
+{
+ return sport->devdata->devtype == IMX1_UART;
+}
+
+static inline int is_imx21_uart(struct imx_port *sport)
+{
+ return sport->devdata->devtype == IMX21_UART;
+}
+
/*
* Handle any change of modem status signal since we were last called.
*/
@@ -326,7 +376,8 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
struct circ_buf *xmit = &sport->port.state->xmit;
while (!uart_circ_empty(xmit) &&
- !(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
+ !(readl(sport->port.membase + uts_reg(sport))
+ & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
@@ -373,7 +424,7 @@ static void imx_start_tx(struct uart_port *port)
writel(temp, sport->port.membase + UCR4);
}
- if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
+ if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY)
imx_transmit_buffer(sport);
}
@@ -689,9 +740,9 @@ static int imx_startup(struct uart_port *port)
}
}
- if (!cpu_is_mx1()) {
+ if (is_imx21_uart(sport)) {
temp = readl(sport->port.membase + UCR3);
- temp |= MX2_UCR3_RXDMUXSEL;
+ temp |= IMX21_UCR3_RXDMUXSEL;
writel(temp, sport->port.membase + UCR3);
}
@@ -923,9 +974,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
writel(num, sport->port.membase + UBIR);
writel(denom, sport->port.membase + UBMR);
- if (!cpu_is_mx1())
+ if (is_imx21_uart(sport))
writel(sport->port.uartclk / div / 1000,
- sport->port.membase + MX2_ONEMS);
+ sport->port.membase + IMX21_ONEMS);
writel(old_ucr1, sport->port.membase + UCR1);
@@ -1041,7 +1092,7 @@ static void imx_console_putchar(struct uart_port *port, int ch)
{
struct imx_port *sport = (struct imx_port *)port;
- while (readl(sport->port.membase + UTS) & UTS_TXFULL)
+ while (readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)
barrier();
writel(ch, sport->port.membase + URTX0);
@@ -1062,8 +1113,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
old_ucr2 = readl(sport->port.membase + UCR2);
- if (cpu_is_mx1())
- ucr1 |= MX1_UCR1_UARTCLKEN;
+ if (is_imx1_uart(sport))
+ ucr1 |= IMX1_UCR1_UARTCLKEN;
ucr1 |= UCR1_UARTEN;
ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
@@ -1262,6 +1313,7 @@ static int serial_imx_probe(struct platform_device *pdev)
init_timer(&sport->timer);
sport->timer.function = imx_timeout;
sport->timer.data = (unsigned long)sport;
+ sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data;
sport->clk = clk_get(&pdev->dev, "uart");
if (IS_ERR(sport->clk)) {
@@ -1340,6 +1392,7 @@ static struct platform_driver serial_imx_driver = {
.suspend = serial_imx_suspend,
.resume = serial_imx_resume,
+ .id_table = imx_uart_devtype,
.driver = {
.name = "imx-uart",
.owner = THIS_MODULE,
OpenPOWER on IntegriCloud