diff options
author | Alexey Pelykh <alexey.pelykh@gmail.com> | 2013-02-04 12:19:46 -0500 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-02-05 11:13:16 -0800 |
commit | 1776fd059c40907297d6c26c51876575d63fd9e2 (patch) | |
tree | 0c035fb2962efd0a5047538323c30a5f3794252f /drivers/tty/serial | |
parent | f26402e81743d06b938a388925904bd47763277a (diff) | |
download | op-kernel-dev-1776fd059c40907297d6c26c51876575d63fd9e2.zip op-kernel-dev-1776fd059c40907297d6c26c51876575d63fd9e2.tar.gz |
OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation
Original configuration of Rx FIFO threshold contained an error
that resulted Rx threshold to be effectively set to 1 character
instead of 16 characters, as noted in comments.
Checking LSR to contain UART_LSR_THRE bit set caused issue when
not all UART_IER_THRI interrupts have been properly handled.
This caused gap in Tx data, visible on high baud rates using
oscilloscope.
Setting OMAP_UART_SCR_TX_EMPTY bit in SCR caused UART_IER_THRI
interrupt to be raised only when Tx FIFO and Tx shift registers
are empty.
Signed-off-by: Alexey Pelykh <alexey.pelykh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/omap-serial.c | 8 |
1 files changed, 2 insertions, 6 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 9915e4d..4dc4140 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -59,6 +59,7 @@ /* SCR register bitmasks */ #define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK (1 << 6) #define OMAP_UART_SCR_TX_EMPTY (1 << 3) /* FCR register bitmasks */ @@ -320,9 +321,6 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) struct circ_buf *xmit = &up->port.state->xmit; int count; - if (!(lsr & UART_LSR_THRE)) - return; - if (up->port.x_char) { serial_out(up, UART_TX, up->port.x_char); up->port.icount.tx++; @@ -864,7 +862,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; - up->scr = OMAP_UART_SCR_TX_EMPTY; + up->scr = 0; /* FIFOs and DMA Settings */ @@ -888,8 +886,6 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); /* FIFO ENABLE, DMA MODE */ - up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; - /* Set receive FIFO threshold to 16 characters and * transmit FIFO threshold to 16 spaces */ |