serial: sh-sci: Move overrun_bit and error_mask fields out of pdata

None of the fields is ever set by board code, and both of them are set
in the driver at probe time. Move them out of struct plat_sci_port to
struct sci_port.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

2 files changed, 24 insertions, 28 deletions

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e9c6e23..98b8e3c 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -64,6 +64,9 @@ struct sci_port {
 
 	/* Platform configuration */
 	struct plat_sci_port	*cfg;
+	int			overrun_bit;
+	unsigned int		error_mask;
+
 
 	/* Break timer */
 	struct timer_list	break_timer;
@@ -760,19 +763,15 @@ static int sci_handle_errors(struct uart_port *port)
 	struct tty_port *tport = &port->state->port;
 	struct sci_port *s = to_sci_port(port);
 
-	/*
-	 * Handle overruns, if supported.
-	 */
-	if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
-		if (status & (1 << s->cfg->overrun_bit)) {
-			port->icount.overrun++;
+	/* Handle overruns */
+	if (status & (1 << s->overrun_bit)) {
+		port->icount.overrun++;
 
-			/* overrun error */
-			if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
-				copied++;
+		/* overrun error */
+		if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
+			copied++;
 
-			dev_notice(port->dev, "overrun error");
-		}
+		dev_notice(port->dev, "overrun error");
 	}
 
 	if (status & SCxSR_FER(port)) {
@@ -834,7 +833,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 	if (!reg->size)
 		return 0;
 
-	if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
+	if ((serial_port_in(port, SCLSR) & (1 << s->overrun_bit))) {
 		serial_port_out(port, SCLSR, 0);
 
 		port->icount.overrun++;
@@ -2253,28 +2252,25 @@ static int sci_init_single(struct platform_device *dev,
 	/*
 	 * Establish some sensible defaults for the error detection.
 	 */
-	if (!p->error_mask)
-		p->error_mask = (p->type == PORT_SCI) ?
+	sci_port->error_mask = (p->type == PORT_SCI) ?
 			SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
 
 	/*
 	 * Establish sensible defaults for the overrun detection, unless
 	 * the part has explicitly disabled support for it.
 	 */
-	if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
-		if (p->type == PORT_SCI)
-			p->overrun_bit = 5;
-		else if (p->scbrr_algo_id == SCBRR_ALGO_4)
-			p->overrun_bit = 9;
-		else
-			p->overrun_bit = 0;
+	if (p->type == PORT_SCI)
+		sci_port->overrun_bit = 5;
+	else if (p->scbrr_algo_id == SCBRR_ALGO_4)
+		sci_port->overrun_bit = 9;
+	else
+		sci_port->overrun_bit = 0;
 
-		/*
-		 * Make the error mask inclusive of overrun detection, if
-		 * supported.
-		 */
-		p->error_mask |= (1 << p->overrun_bit);
-	}
+	/*
+	 * Make the error mask inclusive of overrun detection, if
+	 * supported.
+	 */
+	sci_port->error_mask |= 1 << sci_port->overrun_bit;
 
 	port->type		= p->type;
 	port->flags		= UPF_FIXED_PORT | p->flags;
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 5aca736..d5db81a 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -9,7 +9,7 @@
 #define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 #define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 
-#define SCxSR_ERRORS(port)	(to_sci_port(port)->cfg->error_mask)
+#define SCxSR_ERRORS(port)	(to_sci_port(port)->error_mask)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \