diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2012-10-06 09:12:44 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2012-11-04 12:29:33 +0000 |
commit | c7d059cae31f328bbe2be6ab737226d338f22486 (patch) | |
tree | 0e733e2418dc6fc4abf07064b8378b69776d75e5 /drivers/tty/serial/omap-serial.c | |
parent | 18f360f865cffde44b112577fed1a6a0dd2740dc (diff) | |
download | op-kernel-dev-c7d059cae31f328bbe2be6ab737226d338f22486.zip op-kernel-dev-c7d059cae31f328bbe2be6ab737226d338f22486.tar.gz |
SERIAL: omap: always set TCR
We always setup the TCR register in the software flow control path,
and when hardware flow control is enabled. Remove this redundant
setup, and place it before we setup any hardware flow control.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/tty/serial/omap-serial.c')
-rw-r--r-- | drivers/tty/serial/omap-serial.c | 28 |
1 files changed, 11 insertions, 17 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index fbce4c2..7180ffc 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -898,31 +898,30 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, else serial_out(up, UART_OMAP_MDR1, up->mdr1); - /* Hardware Flow Control Configuration */ + /* Enable access to TCR/TLR */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable access to TCR/TLR */ - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + /* Hardware Flow Control Configuration */ + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { /* Enable AUTORTS and AUTOCTS */ up->efr |= UART_EFR_CTS | UART_EFR_RTS; /* Ensure MCR RTS is asserted */ up->mcr |= UART_MCR_RTS; - - /* Disable access to TCR/TLR */ - serial_out(up, UART_MCR, up->mcr); } else { /* Disable AUTORTS and AUTOCTS */ up->efr &= ~(UART_EFR_CTS | UART_EFR_RTS); } if (up->port.flags & UPF_SOFT_FLOW) { + /* Disable access to TCR/TLR */ + serial_out(up, UART_MCR, up->mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, up->efr); @@ -961,14 +960,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->mcr |= UART_MCR_XONANY; else up->mcr &= ~UART_MCR_XONANY; - - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr); } + serial_out(up, UART_MCR, up->mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, up->lcr); |