diff options
author | Paul Bolle <pebolle@tiscali.nl> | 2014-02-09 14:22:55 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-02-15 12:16:21 -0800 |
commit | b2b2d6067db89afac3185de6e869766aa259731d (patch) | |
tree | 030c1c3e533764eba84dd415b5983d0179a72c68 /drivers/tty/serial/crisv10.c | |
parent | 86a41c46c7b5a1335b849f5e48d20184e4a905e1 (diff) | |
download | op-kernel-dev-b2b2d6067db89afac3185de6e869766aa259731d.zip op-kernel-dev-b2b2d6067db89afac3185de6e869766aa259731d.tar.gz |
tty: serial: crisv10: Drop remaining code for CRISv10 CPU simulator
The Kconfig symbol SVINTO_SIM got dropped in commit e269a869417c ("Drop
code for CRISv10 CPU simulator"). Now drop the remaining code for that
simulator.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/crisv10.c')
-rw-r--r-- | drivers/tty/serial/crisv10.c | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 690bdea..d567ac5 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -286,7 +286,6 @@ static struct e100_serial rs_table[] = { #endif }, /* ttyS0 */ -#ifndef CONFIG_SVINTO_SIM { .baud = DEF_BAUD, .ioport = (unsigned char *)R_SERIAL1_CTRL, .irq = 1U << 16, /* uses DMA 8 and 9 */ @@ -447,7 +446,6 @@ static struct e100_serial rs_table[] = { .dma_in_enabled = 0 #endif } /* ttyS3 */ -#endif }; @@ -1035,7 +1033,6 @@ cflag_to_etrax_baud(unsigned int cflag) static inline void e100_dtr(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM unsigned char mask = e100_modem_pins[info->line].dtr_mask; #ifdef SERIAL_DEBUG_IO @@ -1060,7 +1057,6 @@ e100_dtr(struct e100_serial *info, int set) info->line, *e100_modem_pins[info->line].dtr_shadow, E100_DTR_GET(info)); #endif -#endif } /* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive @@ -1069,7 +1065,6 @@ e100_dtr(struct e100_serial *info, int set) static inline void e100_rts(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM unsigned long flags; local_irq_save(flags); info->rx_ctrl &= ~E100_RTS_MASK; @@ -1079,7 +1074,6 @@ e100_rts(struct e100_serial *info, int set) #ifdef SERIAL_DEBUG_IO printk("ser%i rts %i\n", info->line, set); #endif -#endif } @@ -1087,7 +1081,6 @@ e100_rts(struct e100_serial *info, int set) static inline void e100_ri_out(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM /* RI is active low */ { unsigned char mask = e100_modem_pins[info->line].ri_mask; @@ -1099,12 +1092,10 @@ e100_ri_out(struct e100_serial *info, int set) *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; local_irq_restore(flags); } -#endif } static inline void e100_cd_out(struct e100_serial *info, int set) { -#ifndef CONFIG_SVINTO_SIM /* CD is active low */ { unsigned char mask = e100_modem_pins[info->line].cd_mask; @@ -1116,27 +1107,22 @@ e100_cd_out(struct e100_serial *info, int set) *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; local_irq_restore(flags); } -#endif } static inline void e100_disable_rx(struct e100_serial *info) { -#ifndef CONFIG_SVINTO_SIM /* disable the receiver */ info->ioport[REG_REC_CTRL] = (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif } static inline void e100_enable_rx(struct e100_serial *info) { -#ifndef CONFIG_SVINTO_SIM /* enable the receiver */ info->ioport[REG_REC_CTRL] = (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif } /* the rx DMA uses both the dma_descr and the dma_eop interrupts */ @@ -1554,24 +1540,6 @@ transmit_chars_dma(struct e100_serial *info) unsigned int c, sentl; struct etrax_dma_descr *descr; -#ifdef CONFIG_SVINTO_SIM - /* This will output too little if tail is not 0 always since - * we don't reloop to send the other part. Anyway this SHOULD be a - * no-op - transmit_chars_dma would never really be called during sim - * since rs_write does not write into the xmit buffer then. - */ - if (info->xmit.tail) - printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); - if (info->xmit.head != info->xmit.tail) { - SIMCOUT(info->xmit.buf + info->xmit.tail, - CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE)); - info->xmit.head = info->xmit.tail; /* move back head */ - info->tr_running = 0; - } - return; -#endif /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ *info->oclrintradr = IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | @@ -1842,13 +1810,6 @@ static void receive_chars_dma(struct e100_serial *info) struct tty_struct *tty; unsigned char rstat; -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif - /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ *info->iclrintradr = IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | @@ -1934,12 +1895,6 @@ static int start_recv_dma(struct e100_serial *info) static void start_receive(struct e100_serial *info) { -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif if (info->uses_dma_in) { /* reset the input dma channel to be sure it works */ @@ -1972,17 +1927,6 @@ tr_interrupt(int irq, void *dev_id) int i; int handled = 0; -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? tr_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - /* find out the line that caused this irq and get it from rs_table */ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ @@ -2021,17 +1965,6 @@ rec_interrupt(int irq, void *dev_id) int i; int handled = 0; -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? rec_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - /* find out the line that caused this irq and get it from rs_table */ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ @@ -2173,10 +2106,6 @@ timed_flush_handler(unsigned long ptr) struct e100_serial *info; int i; -#ifdef CONFIG_SVINTO_SIM - return; -#endif - for (i = 0; i < NR_PORTS; i++) { info = rs_table + i; if (info->uses_dma_in) @@ -2729,25 +2658,6 @@ startup(struct e100_serial * info) printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); #endif -#ifdef CONFIG_SVINTO_SIM - /* Bits and pieces collected from below. Better to have them - in one ifdef:ed clause than to mix in a lot of ifdefs, - right? */ - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->xmit.head = info->xmit.tail = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - info->rec_descr[i].buf = NULL; - - /* No real action in the simulator, but may set info important - to ioctl. */ - change_speed(info); -#else - /* * Clear the FIFO buffers and disable them * (they will be reenabled in change_speed()) @@ -2837,8 +2747,6 @@ startup(struct e100_serial * info) e100_rts(info, 1); e100_dtr(info, 1); -#endif /* CONFIG_SVINTO_SIM */ - info->port.flags |= ASYNC_INITIALIZED; local_irq_restore(flags); @@ -2857,7 +2765,6 @@ shutdown(struct e100_serial * info) struct etrax_recv_buffer *buffer; int i; -#ifndef CONFIG_SVINTO_SIM /* shut down the transmitter and receiver */ DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); e100_disable_rx(info); @@ -2882,8 +2789,6 @@ shutdown(struct e100_serial * info) info->tr_running = 0; } -#endif /* CONFIG_SVINTO_SIM */ - if (!(info->port.flags & ASYNC_INITIALIZED)) return; @@ -2995,17 +2900,12 @@ change_speed(struct e100_serial *info) IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); r_alt_ser_baudrate_shadow &= ~mask; r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); -#ifndef CONFIG_SVINTO_SIM *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; -#endif /* CONFIG_SVINTO_SIM */ info->baud = cflag_to_baud(cflag); -#ifndef CONFIG_SVINTO_SIM info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); -#endif /* CONFIG_SVINTO_SIM */ } -#ifndef CONFIG_SVINTO_SIM /* start with default settings and then fill in changes */ local_irq_save(flags); /* 8 bit, no/even parity */ @@ -3073,7 +2973,6 @@ change_speed(struct e100_serial *info) *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); -#endif /* !CONFIG_SVINTO_SIM */ update_char_time(info); @@ -3122,11 +3021,6 @@ static int rs_raw_write(struct tty_struct *tty, count, info->ioport[REG_STATUS]); #endif -#ifdef CONFIG_SVINTO_SIM - /* Really simple. The output is here and now. */ - SIMCOUT(buf, count); - return count; -#endif local_save_flags(flags); DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); @@ -3463,7 +3357,6 @@ static int get_lsr_info(struct e100_serial * info, unsigned int *value) { unsigned int result = TIOCSER_TEMT; -#ifndef CONFIG_SVINTO_SIM unsigned long curr_time = jiffies; unsigned long curr_time_usec = GET_JIFFIES_USEC(); unsigned long elapsed_usec = @@ -3474,7 +3367,6 @@ get_lsr_info(struct e100_serial * info, unsigned int *value) elapsed_usec < 2*info->char_time_usec) { result = 0; } -#endif if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; @@ -3804,7 +3696,6 @@ rs_close(struct tty_struct *tty, struct file * filp) e100_disable_serial_data_irq(info); #endif -#ifndef CONFIG_SVINTO_SIM e100_disable_rx(info); e100_disable_rx_irq(info); @@ -3816,7 +3707,6 @@ rs_close(struct tty_struct *tty, struct file * filp) */ rs_wait_until_sent(tty, HZ); } -#endif shutdown(info); rs_flush_buffer(tty); @@ -4479,7 +4369,6 @@ static int __init rs_init(void) fast_timer_init(); #endif -#ifndef CONFIG_SVINTO_SIM #ifndef CONFIG_ETRAX_KGDB /* Not needed in simulator. May only complicate stuff. */ /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ @@ -4489,7 +4378,6 @@ static int __init rs_init(void) panic("%s: Failed to request irq8", __func__); #endif -#endif /* CONFIG_SVINTO_SIM */ return 0; } |