diff options
| author | Wilson Ding <dingwei@marvell.com> | 2016-02-16 19:14:53 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-03-07 16:11:14 -0800 |
| commit | 30530791a7a032dc27dbbab56b8afabd5138074c (patch) | |
| tree | d1a5505aea2f2b173e841cf34a6b3471db38e615 /drivers/tty/serial/Makefile | |
| parent | 82a3f87f6e80e0bf7978152021eb8938976721cb (diff) | |
| download | op-kernel-dev-30530791a7a032dc27dbbab56b8afabd5138074c.zip op-kernel-dev-30530791a7a032dc27dbbab56b8afabd5138074c.tar.gz | |
serial: mvebu-uart: initial support for Armada-3700 serial port
Armada-3700's uart is a simple serial port, which doesn't
support. Configuring the modem control lines. The uart port has a 32
bytes Tx FIFO and a 64 bytes Rx FIFO
The uart driver implements the uart core operations. It also support the
system (early) console based on Armada-3700's serial port.
Known Issue:
The uart driver currently doesn't support clock programming, which means
the baud-rate stays with the default value configured by the bootloader
at boot time
[gregory.clement@free-electrons.com: Rewrite many part which are too long
to enumerate]
Signed-off-by: Wilson Ding <dingwei@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/Makefile')
| -rw-r--r-- | drivers/tty/serial/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index ceba33c..8c261ad 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o +obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o |
