summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
diff options
context:
space:
mode:
authorLukasz Majewski <l.majewski@samsung.com>2013-12-20 15:24:55 +0100
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2014-01-17 02:00:45 +0100
commit4f11b85a5f2cc279860da3b9977a9586ff2df167 (patch)
treeedb4ac7c49b97b742d6cf221873d92289cb5a5c6 /drivers/thermal
parentd2228b91fc7709fddeb34450c0ce059fe0a19c60 (diff)
downloadop-kernel-dev-4f11b85a5f2cc279860da3b9977a9586ff2df167.zip
op-kernel-dev-4f11b85a5f2cc279860da3b9977a9586ff2df167.tar.gz
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
This patch provides auto disable/enable operation for boost. It uses already present thermal infrastructure to provide BOOST hysteresis. The TMU data is modified to work properly with or without BOOST. Hence, the two first trip points with corresponding clip frequencies are adjusted. The first one is reduced from 85 to 70 degrees and the clip frequency is increased to 1.4 GHz from 800 MHz. This trip point is in fact responsible for providing BOOST hysteresis. When temperature exceeds 70 deg, the maximal non BOOST frequency for Exynos4412 is imposed. Since the first trigger level has been "stolen" for BOOST, the second one needs to be a compromise for the previously used two for non BOOST configuration. The 95 deg with modified clip freq (to 400 MHz) should provide a good balance between cooling down the overheated device and throughput on an acceptable level. Two last trigger levels are not modified since, they cause platform shutdown on emergency overheat to happen. The third trip point passage results in SW managed shut down of the system. If the last trip point is crossed, the PMU HW generates the power off signal. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/thermal')
-rw-r--r--drivers/thermal/samsung/exynos_tmu_data.c12
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 073c292..476b768 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -131,8 +131,8 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
#define EXYNOS4412_TMU_DATA \
.threshold_falling = 10, \
- .trigger_levels[0] = 85, \
- .trigger_levels[1] = 103, \
+ .trigger_levels[0] = 70, \
+ .trigger_levels[1] = 95, \
.trigger_levels[2] = 110, \
.trigger_levels[3] = 120, \
.trigger_enable[0] = true, \
@@ -155,12 +155,12 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.second_point_trim = 85, \
.default_temp_offset = 50, \
.freq_tab[0] = { \
- .freq_clip_max = 800 * 1000, \
- .temp_level = 85, \
+ .freq_clip_max = 1400 * 1000, \
+ .temp_level = 70, \
}, \
.freq_tab[1] = { \
- .freq_clip_max = 200 * 1000, \
- .temp_level = 103, \
+ .freq_clip_max = 400 * 1000, \
+ .temp_level = 95, \
}, \
.freq_tab_count = 2, \
.registers = &exynos4412_tmu_registers, \
OpenPOWER on IntegriCloud