thermal: exynos: Add missing definations and code cleanup

This patch adds some extra register bitfield definations and cleans
up the code to prepare for moving register macros and definations inside
the TMU data section. In this code cleanup the TMU enable bit is correctly used
as bit0 and bit1 is taken care which is reserve bit.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

1 files changed, 46 insertions, 16 deletions

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 5df04a1..fa33a48 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -43,9 +43,12 @@
 
 #define EXYNOS_TMU_TRIM_TEMP_MASK	0xff
 #define EXYNOS_TMU_GAIN_SHIFT		8
+#define EXYNOS_TMU_GAIN_MASK		0xf
 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT	24
-#define EXYNOS_TMU_CORE_ON		3
-#define EXYNOS_TMU_CORE_OFF		2
+#define EXYNOS_TMU_REF_VOLTAGE_MASK	0x1f
+#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK	0xf
+#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT	8
+#define EXYNOS_TMU_CORE_EN_SHIFT	0
 #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET	50
 
 /* Exynos4210 specific registers */
@@ -63,6 +66,7 @@
 #define EXYNOS4210_TMU_TRIG_LEVEL1_MASK	0x10
 #define EXYNOS4210_TMU_TRIG_LEVEL2_MASK	0x100
 #define EXYNOS4210_TMU_TRIG_LEVEL3_MASK	0x1000
+#define EXYNOS4210_TMU_TRIG_LEVEL_MASK	0x1111
 #define EXYNOS4210_TMU_INTCLEAR_VAL	0x1111
 
 /* Exynos5250 and Exynos4412 specific registers */
@@ -72,17 +76,30 @@
 #define EXYNOS_EMUL_CON		0x80
 
 #define EXYNOS_TRIMINFO_RELOAD		0x1
+#define EXYNOS_TRIMINFO_SHIFT		0x0
+#define EXYNOS_TMU_RISE_INT_MASK	0x111
+#define EXYNOS_TMU_RISE_INT_SHIFT	0
+#define EXYNOS_TMU_FALL_INT_MASK	0x111
+#define EXYNOS_TMU_FALL_INT_SHIFT	12
 #define EXYNOS_TMU_CLEAR_RISE_INT	0x111
 #define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 12)
-#define EXYNOS_MUX_ADDR_VALUE		6
-#define EXYNOS_MUX_ADDR_SHIFT		20
 #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
+#define EXYNOS_TMU_TRIP_MODE_MASK	0x7
+
+#define EXYNOS_TMU_INTEN_RISE0_SHIFT	0
+#define EXYNOS_TMU_INTEN_RISE1_SHIFT	4
+#define EXYNOS_TMU_INTEN_RISE2_SHIFT	8
+#define EXYNOS_TMU_INTEN_RISE3_SHIFT	12
+#define EXYNOS_TMU_INTEN_FALL0_SHIFT	16
+#define EXYNOS_TMU_INTEN_FALL1_SHIFT	20
+#define EXYNOS_TMU_INTEN_FALL2_SHIFT	24
 
 #define EFUSE_MIN_VALUE 40
 #define EFUSE_MAX_VALUE 100
 
 #ifdef CONFIG_THERMAL_EMULATION
 #define EXYNOS_EMUL_TIME	0x57F0
+#define EXYNOS_EMUL_TIME_MASK	0xffff
 #define EXYNOS_EMUL_TIME_SHIFT	16
 #define EXYNOS_EMUL_DATA_SHIFT	8
 #define EXYNOS_EMUL_DATA_MASK	0xFF
@@ -261,24 +278,37 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
 
-	con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
-		pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
+	con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
 
-	if (data->soc == SOC_ARCH_EXYNOS) {
-		con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT;
-		con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
+	if (pdata->reference_voltage) {
+		con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK <<
+				EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+		con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
+	}
+
+	if (pdata->gain) {
+		con &= ~(EXYNOS_TMU_GAIN_MASK << EXYNOS_TMU_GAIN_SHIFT);
+		con |= (pdata->gain << EXYNOS_TMU_GAIN_SHIFT);
+	}
+
+	if (pdata->noise_cancel_mode) {
+		con &= ~(EXYNOS_TMU_TRIP_MODE_MASK <<
+					EXYNOS_TMU_TRIP_MODE_SHIFT);
+		con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
 	}
 
 	if (on) {
-		con |= EXYNOS_TMU_CORE_ON;
-		interrupt_en = pdata->trigger_level3_en << 12 |
-			pdata->trigger_level2_en << 8 |
-			pdata->trigger_level1_en << 4 |
-			pdata->trigger_level0_en;
+		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+		interrupt_en =
+		pdata->trigger_level3_en << EXYNOS_TMU_INTEN_RISE3_SHIFT |
+		pdata->trigger_level2_en << EXYNOS_TMU_INTEN_RISE2_SHIFT |
+		pdata->trigger_level1_en << EXYNOS_TMU_INTEN_RISE1_SHIFT |
+		pdata->trigger_level0_en << EXYNOS_TMU_INTEN_RISE0_SHIFT;
 		if (pdata->threshold_falling)
-			interrupt_en |= interrupt_en << 16;
+			interrupt_en |=
+				interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 	} else {
-		con |= EXYNOS_TMU_CORE_OFF;
+		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 		interrupt_en = 0; /* Disable all interrupts */
 	}
 	writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);