diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-11 12:26:08 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-11 12:26:08 -0700 |
commit | 8cbd0eefcaf8cc32ded2bf229f0fc379b2ad69f2 (patch) | |
tree | 08cc79685a888470509b969a2c079249ee28b69f /drivers/staging | |
parent | 1466b77a7be75144dee1cb09839be3435854dd0b (diff) | |
parent | e8d39240d635ed9bcaddbec898b1c9f063c5dbb2 (diff) | |
download | op-kernel-dev-8cbd0eefcaf8cc32ded2bf229f0fc379b2ad69f2.zip op-kernel-dev-8cbd0eefcaf8cc32ded2bf229f0fc379b2ad69f2.tar.gz |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
"There are not too many changes this time, except two new platform
thermal drivers, ti-soc-thermal driver and x86_pkg_temp_thermal
driver, and a couple of small fixes.
Highlights:
- move the ti-soc-thermal driver out of the staging tree to the
thermal tree.
- introduce the x86_pkg_temp_thermal driver. This driver registers
CPU digital temperature package level sensor as a thermal zone.
- small fixes/cleanups including removing redundant use of
platform_set_drvdata() and of_match_ptr for all platform thermal
drivers"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
thermal: cpu_cooling: fix stub function
thermal: ti-soc-thermal: use standard GPIO DT bindings
thermal: MAINTAINERS: Add git tree path for SoC specific updates
thermal: fix x86_pkg_temp_thermal.c build and Kconfig
Thermal: Documentation for x86 package temperature thermal driver
Thermal: CPU Package temperature thermal
thermal: consider emul_temperature while computing trend
thermal: ti-soc-thermal: add DT example for DRA752 chip
thermal: ti-soc-thermal: add dra752 chip to device table
thermal: ti-soc-thermal: add thermal data for DRA752 chips
thermal: ti-soc-thermal: remove usage of IS_ERR_OR_NULL
thermal: ti-soc-thermal: freeze FSM while computing trend
thermal: ti-soc-thermal: remove external heat while extrapolating hotspot
thermal: ti-soc-thermal: update DT reference for OMAP5430
x86, mcheck, therm_throt: Process package thresholds
thermal: cpu_cooling: fix 'descend' check in get_property()
Thermal: spear: Remove redundant use of of_match_ptr
Thermal: kirkwood: Remove redundant use of of_match_ptr
Thermal: dove: Remove redundant use of of_match_ptr
Thermal: armada: Remove redundant use of of_match_ptr
...
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/Kconfig | 2 | ||||
-rw-r--r-- | drivers/staging/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/Kconfig | 48 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/Makefile | 5 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/TODO | 12 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/omap4-thermal-data.c | 267 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h | 175 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/omap5-thermal-data.c | 359 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h | 200 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/ti-bandgap.c | 1546 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/ti-bandgap.h | 403 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/ti-thermal-common.c | 377 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/ti-thermal.h | 117 | ||||
-rw-r--r-- | drivers/staging/ti-soc-thermal/ti_soc_thermal.txt | 61 |
14 files changed, 0 insertions, 3573 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index f64b662..3227ebe 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -120,8 +120,6 @@ source "drivers/staging/gdm72xx/Kconfig" source "drivers/staging/csr/Kconfig" -source "drivers/staging/ti-soc-thermal/Kconfig" - source "drivers/staging/silicom/Kconfig" source "drivers/staging/ced1401/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 1fb58a1..4d79ebe 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_ANDROID) += android/ obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/ obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/ obj-$(CONFIG_CSR_WIFI) += csr/ -obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_NET_VENDOR_SILICOM) += silicom/ obj-$(CONFIG_CED1401) += ced1401/ obj-$(CONFIG_DRM_IMX) += imx-drm/ diff --git a/drivers/staging/ti-soc-thermal/Kconfig b/drivers/staging/ti-soc-thermal/Kconfig deleted file mode 100644 index e81375f..0000000 --- a/drivers/staging/ti-soc-thermal/Kconfig +++ /dev/null @@ -1,48 +0,0 @@ -config TI_SOC_THERMAL - tristate "Texas Instruments SoCs temperature sensor driver" - depends on THERMAL - depends on ARCH_HAS_BANDGAP - help - If you say yes here you get support for the Texas Instruments - OMAP4460+ on die bandgap temperature sensor support. The register - set is part of system control module. - - This includes alert interrupts generation and also the TSHUT - support. - -config TI_THERMAL - bool "Texas Instruments SoCs thermal framework support" - depends on TI_SOC_THERMAL - depends on CPU_THERMAL - help - If you say yes here you want to get support for generic thermal - framework for the Texas Instruments on die bandgap temperature sensor. - - This includes trip points definitions, extrapolation rules and - CPU cooling device bindings. - -config OMAP4_THERMAL - bool "Texas Instruments OMAP4 thermal support" - depends on TI_SOC_THERMAL - depends on ARCH_OMAP4 - help - If you say yes here you get thermal support for the Texas Instruments - OMAP4 SoC family. The current chip supported are: - - OMAP4430 - - OMAP4460 - - OMAP4470 - - This includes alert interrupts generation and also the TSHUT - support. - -config OMAP5_THERMAL - bool "Texas Instruments OMAP5 thermal support" - depends on TI_SOC_THERMAL - depends on SOC_OMAP5 - help - If you say yes here you get thermal support for the Texas Instruments - OMAP5 SoC family. The current chip supported are: - - OMAP5430 - - This includes alert interrupts generation and also the TSHUT - support. diff --git a/drivers/staging/ti-soc-thermal/Makefile b/drivers/staging/ti-soc-thermal/Makefile deleted file mode 100644 index 0ca034f..0000000 --- a/drivers/staging/ti-soc-thermal/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o -ti-soc-thermal-y := ti-bandgap.o -ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o -ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o -ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o diff --git a/drivers/staging/ti-soc-thermal/TODO b/drivers/staging/ti-soc-thermal/TODO deleted file mode 100644 index 7da787d..0000000 --- a/drivers/staging/ti-soc-thermal/TODO +++ /dev/null @@ -1,12 +0,0 @@ -List of TODOs (by Eduardo Valentin) - -on ti-bandgap.c: -- Revisit PM support - -on ti-thermal-common.c/ti-thermal.h: -- Revisit need for locking - -generally: -- make sure this code works on OMAP4430, OMAP4460 and OMAP5430 - -Copy patches to Eduardo Valentin <eduardo.valentin@ti.com> diff --git a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c deleted file mode 100644 index d255d33..0000000 --- a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * OMAP4 thermal driver. - * - * Copyright (C) 2011-2012 Texas Instruments Inc. - * Contact: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include "ti-thermal.h" -#include "ti-bandgap.h" -#include "omap4xxx-bandgap.h" - -/* - * OMAP4430 has one instance of thermal sensor for MPU - * need to describe the individual bit fields - */ -static struct temp_sensor_registers -omap4430_mpu_temp_sensor_registers = { - .temp_sensor_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET, - .bgap_tempsoff_mask = OMAP4430_BGAP_TEMPSOFF_MASK, - .bgap_soc_mask = OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK, - .bgap_eocz_mask = OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK, - .bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK, - - .bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET, - .mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK, - - .bgap_efuse = OMAP4430_FUSE_OPP_BGAP, -}; - -/* Thresholds and limits for OMAP4430 MPU temperature sensor */ -static struct temp_sensor_data omap4430_mpu_temp_sensor_data = { - .min_freq = OMAP4430_MIN_FREQ, - .max_freq = OMAP4430_MAX_FREQ, - .max_temp = OMAP4430_MAX_TEMP, - .min_temp = OMAP4430_MIN_TEMP, - .hyst_val = OMAP4430_HYST_VAL, -}; - -/* - * Temperature values in milli degree celsius - * ADC code values from 530 to 923 - */ -static const int -omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = { - -38000, -35000, -34000, -32000, -30000, -28000, -26000, -24000, -22000, - -20000, -18000, -17000, -15000, -13000, -12000, -10000, -8000, -6000, - -5000, -3000, -1000, 0, 2000, 3000, 5000, 6000, 8000, 10000, 12000, - 13000, 15000, 17000, 19000, 21000, 23000, 25000, 27000, 28000, 30000, - 32000, 33000, 35000, 37000, 38000, 40000, 42000, 43000, 45000, 47000, - 48000, 50000, 52000, 53000, 55000, 57000, 58000, 60000, 62000, 64000, - 66000, 68000, 70000, 71000, 73000, 75000, 77000, 78000, 80000, 82000, - 83000, 85000, 87000, 88000, 90000, 92000, 93000, 95000, 97000, 98000, - 100000, 102000, 103000, 105000, 107000, 109000, 111000, 113000, 115000, - 117000, 118000, 120000, 122000, 123000, -}; - -/* OMAP4430 data */ -const struct ti_bandgap_data omap4430_data = { - .features = TI_BANDGAP_FEATURE_MODE_CONFIG | - TI_BANDGAP_FEATURE_CLK_CTRL | - TI_BANDGAP_FEATURE_POWER_SWITCH, - .fclock_name = "bandgap_fclk", - .div_ck_name = "bandgap_fclk", - .conv_table = omap4430_adc_to_temp, - .adc_start_val = OMAP4430_ADC_START_VALUE, - .adc_end_val = OMAP4430_ADC_END_VALUE, - .expose_sensor = ti_thermal_expose_sensor, - .remove_sensor = ti_thermal_remove_sensor, - .sensors = { - { - .registers = &omap4430_mpu_temp_sensor_registers, - .ts_data = &omap4430_mpu_temp_sensor_data, - .domain = "cpu", - .slope = OMAP_GRADIENT_SLOPE_4430, - .constant = OMAP_GRADIENT_CONST_4430, - .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4430, - .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4430, - .register_cooling = ti_thermal_register_cpu_cooling, - .unregister_cooling = ti_thermal_unregister_cpu_cooling, - }, - }, - .sensor_count = 1, -}; -/* - * OMAP4460 has one instance of thermal sensor for MPU - * need to describe the individual bit fields - */ -static struct temp_sensor_registers -omap4460_mpu_temp_sensor_registers = { - .temp_sensor_ctrl = OMAP4460_TEMP_SENSOR_CTRL_OFFSET, - .bgap_tempsoff_mask = OMAP4460_BGAP_TEMPSOFF_MASK, - .bgap_soc_mask = OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK, - .bgap_eocz_mask = OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK, - .bgap_dtemp_mask = OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK, - - .bgap_mask_ctrl = OMAP4460_BGAP_CTRL_OFFSET, - .mask_hot_mask = OMAP4460_MASK_HOT_MASK, - .mask_cold_mask = OMAP4460_MASK_COLD_MASK, - - .bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET, - .mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK, - - .bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET, - .counter_mask = OMAP4460_COUNTER_MASK, - - .bgap_threshold = OMAP4460_BGAP_THRESHOLD_OFFSET, - .threshold_thot_mask = OMAP4460_T_HOT_MASK, - .threshold_tcold_mask = OMAP4460_T_COLD_MASK, - - .tshut_threshold = OMAP4460_BGAP_TSHUT_OFFSET, - .tshut_hot_mask = OMAP4460_TSHUT_HOT_MASK, - .tshut_cold_mask = OMAP4460_TSHUT_COLD_MASK, - - .bgap_status = OMAP4460_BGAP_STATUS_OFFSET, - .status_clean_stop_mask = OMAP4460_CLEAN_STOP_MASK, - .status_bgap_alert_mask = OMAP4460_BGAP_ALERT_MASK, - .status_hot_mask = OMAP4460_HOT_FLAG_MASK, - .status_cold_mask = OMAP4460_COLD_FLAG_MASK, - - .bgap_efuse = OMAP4460_FUSE_OPP_BGAP, -}; - -/* Thresholds and limits for OMAP4460 MPU temperature sensor */ -static struct temp_sensor_data omap4460_mpu_temp_sensor_data = { - .tshut_hot = OMAP4460_TSHUT_HOT, - .tshut_cold = OMAP4460_TSHUT_COLD, - .t_hot = OMAP4460_T_HOT, - .t_cold = OMAP4460_T_COLD, - .min_freq = OMAP4460_MIN_FREQ, - .max_freq = OMAP4460_MAX_FREQ, - .max_temp = OMAP4460_MAX_TEMP, - .min_temp = OMAP4460_MIN_TEMP, - .hyst_val = OMAP4460_HYST_VAL, - .update_int1 = 1000, - .update_int2 = 2000, -}; - -/* - * Temperature values in milli degree celsius - * ADC code values from 530 to 923 - */ -static const int -omap4460_adc_to_temp[OMAP4460_ADC_END_VALUE - OMAP4460_ADC_START_VALUE + 1] = { - -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200, - -37800, -37300, -36800, -36400, -36000, -35600, -35200, -34800, - -34300, -33800, -33400, -33000, -32600, -32200, -31800, -31300, - -30800, -30400, -30000, -29600, -29200, -28700, -28200, -27800, - -27400, -27000, -26600, -26200, -25700, -25200, -24800, -24400, - -24000, -23600, -23200, -22700, -22200, -21800, -21400, -21000, - -20600, -20200, -19700, -19200, -18800, -18400, -18000, -17600, - -17200, -16700, -16200, -15800, -15400, -15000, -14600, -14200, - -13700, -13200, -12800, -12400, -12000, -11600, -11200, -10700, - -10200, -9800, -9400, -9000, -8600, -8200, -7700, -7200, -6800, - -6400, -6000, -5600, -5200, -4800, -4300, -3800, -3400, -3000, - -2600, -2200, -1800, -1300, -800, -400, 0, 400, 800, 1200, 1600, - 2100, 2600, 3000, 3400, 3800, 4200, 4600, 5100, 5600, 6000, 6400, - 6800, 7200, 7600, 8000, 8500, 9000, 9400, 9800, 10200, 10600, 11000, - 11400, 11900, 12400, 12800, 13200, 13600, 14000, 14400, 14800, - 15300, 15800, 16200, 16600, 17000, 17400, 17800, 18200, 18700, - 19200, 19600, 20000, 20400, 20800, 21200, 21600, 22100, 22600, - 23000, 23400, 23800, 24200, 24600, 25000, 25400, 25900, 26400, - 26800, 27200, 27600, 28000, 28400, 28800, 29300, 29800, 30200, - 30600, 31000, 31400, 31800, 32200, 32600, 33100, 33600, 34000, - 34400, 34800, 35200, 35600, 36000, 36400, 36800, 37300, 37800, - 38200, 38600, 39000, 39400, 39800, 40200, 40600, 41100, 41600, - 42000, 42400, 42800, 43200, 43600, 44000, 44400, 44800, 45300, - 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600, 49000, - 49500, 50000, 50400, 50800, 51200, 51600, 52000, 52400, 52800, - 53200, 53700, 54200, 54600, 55000, 55400, 55800, 56200, 56600, - 57000, 57400, 57800, 58200, 58700, 59200, 59600, 60000, 60400, - 60800, 61200, 61600, 62000, 62400, 62800, 63300, 63800, 64200, - 64600, 65000, 65400, 65800, 66200, 66600, 67000, 67400, 67800, - 68200, 68700, 69200, 69600, 70000, 70400, 70800, 71200, 71600, - 72000, 72400, 72800, 73200, 73600, 74100, 74600, 75000, 75400, - 75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600, 79000, - 79400, 79800, 80300, 80800, 81200, 81600, 82000, 82400, 82800, - 83200, 83600, 84000, 84400, 84800, 85200, 85600, 86000, 86400, - 86800, 87300, 87800, 88200, 88600, 89000, 89400, 89800, 90200, - 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400, 93800, - 94200, 94600, 95000, 95500, 96000, 96400, 96800, 97200, 97600, - 98000, 98400, 98800, 99200, 99600, 100000, 100400, 100800, 101200, - 101600, 102000, 102400, 102800, 103200, 103600, 104000, 104400, - 104800, 105200, 105600, 106100, 106600, 107000, 107400, 107800, - 108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000, - 111400, 111800, 112200, 112600, 113000, 113400, 113800, 114200, - 114600, 115000, 115400, 115800, 116200, 116600, 117000, 117400, - 117800, 118200, 118600, 119000, 119400, 119800, 120200, 120600, - 121000, 121400, 121800, 122200, 122600, 123000, 123400, 123800, 124200, - 124600, 124900, 125000, 125000, 125000, 125000 -}; - -/* OMAP4460 data */ -const struct ti_bandgap_data omap4460_data = { - .features = TI_BANDGAP_FEATURE_TSHUT | - TI_BANDGAP_FEATURE_TSHUT_CONFIG | - TI_BANDGAP_FEATURE_TALERT | - TI_BANDGAP_FEATURE_MODE_CONFIG | - TI_BANDGAP_FEATURE_POWER_SWITCH | - TI_BANDGAP_FEATURE_CLK_CTRL | - TI_BANDGAP_FEATURE_COUNTER, - .fclock_name = "bandgap_ts_fclk", - .div_ck_name = "div_ts_ck", - .conv_table = omap4460_adc_to_temp, - .adc_start_val = OMAP4460_ADC_START_VALUE, - .adc_end_val = OMAP4460_ADC_END_VALUE, - .expose_sensor = ti_thermal_expose_sensor, - .remove_sensor = ti_thermal_remove_sensor, - .report_temperature = ti_thermal_report_sensor_temperature, - .sensors = { - { - .registers = &omap4460_mpu_temp_sensor_registers, - .ts_data = &omap4460_mpu_temp_sensor_data, - .domain = "cpu", - .slope = OMAP_GRADIENT_SLOPE_4460, - .constant = OMAP_GRADIENT_CONST_4460, - .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4460, - .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4460, - .register_cooling = ti_thermal_register_cpu_cooling, - .unregister_cooling = ti_thermal_unregister_cpu_cooling, - }, - }, - .sensor_count = 1, -}; - -/* OMAP4470 data */ -const struct ti_bandgap_data omap4470_data = { - .features = TI_BANDGAP_FEATURE_TSHUT | - TI_BANDGAP_FEATURE_TSHUT_CONFIG | - TI_BANDGAP_FEATURE_TALERT | - TI_BANDGAP_FEATURE_MODE_CONFIG | - TI_BANDGAP_FEATURE_POWER_SWITCH | - TI_BANDGAP_FEATURE_CLK_CTRL | - TI_BANDGAP_FEATURE_COUNTER, - .fclock_name = "bandgap_ts_fclk", - .div_ck_name = "div_ts_ck", - .conv_table = omap4460_adc_to_temp, - .adc_start_val = OMAP4460_ADC_START_VALUE, - .adc_end_val = OMAP4460_ADC_END_VALUE, - .expose_sensor = ti_thermal_expose_sensor, - .remove_sensor = ti_thermal_remove_sensor, - .report_temperature = ti_thermal_report_sensor_temperature, - .sensors = { - { - .registers = &omap4460_mpu_temp_sensor_registers, - .ts_data = &omap4460_mpu_temp_sensor_data, - .domain = "cpu", - .slope = OMAP_GRADIENT_SLOPE_4470, - .constant = OMAP_GRADIENT_CONST_4470, - .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4470, - .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4470, - .register_cooling = ti_thermal_register_cpu_cooling, - .unregister_cooling = ti_thermal_unregister_cpu_cooling, - }, - }, - .sensor_count = 1, -}; diff --git a/drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h deleted file mode 100644 index 6f2de3a..0000000 --- a/drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * OMAP4xxx bandgap registers, bitfields and temperature definitions - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * Contact: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ -#ifndef __OMAP4XXX_BANDGAP_H -#define __OMAP4XXX_BANDGAP_H - -/** - * *** OMAP4430 *** - * - * Below, in sequence, are the Register definitions, - * the bitfields and the temperature definitions for OMAP4430. - */ - -/** - * OMAP4430 register definitions - * - * Registers are defined as offsets. The offsets are - * relative to FUSE_OPP_BGAP on 4430. - */ - -/* OMAP4430.FUSE_OPP_BGAP */ -#define OMAP4430_FUSE_OPP_BGAP 0x0 - -/* OMAP4430.TEMP_SENSOR */ -#define OMAP4430_TEMP_SENSOR_CTRL_OFFSET 0xCC - -/** - * Register and bit definitions for OMAP4430 - * - * All the macros bellow define the required bits for - * controlling temperature on OMAP4430. Bit defines are - * grouped by register. - */ - -/* OMAP4430.TEMP_SENSOR bits */ -#define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12) -#define OMAP4430_BGAP_TSHUT_MASK BIT(11) -#define OMAP4430_SINGLE_MODE_MASK BIT(10) -#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9) -#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8) -#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0) - -/** - * Temperature limits and thresholds for OMAP4430 - * - * All the macros bellow are definitions for handling the - * ADC conversions and representation of temperature limits - * and thresholds for OMAP4430. - */ - -/* ADC conversion table limits */ -#define OMAP4430_ADC_START_VALUE 0 -#define OMAP4430_ADC_END_VALUE 127 -/* bandgap clock limits (no control on 4430) */ -#define OMAP4430_MAX_FREQ 32768 -#define OMAP4430_MIN_FREQ 32768 -/* sensor limits */ -#define OMAP4430_MIN_TEMP -40000 -#define OMAP4430_MAX_TEMP 125000 -#define OMAP4430_HYST_VAL 5000 - -/** - * *** OMAP4460 *** Applicable for OMAP4470 - * - * Below, in sequence, are the Register definitions, - * the bitfields and the temperature definitions for OMAP4460. - */ - -/** - * OMAP4460 register definitions - * - * Registers are defined as offsets. The offsets are - * relative to FUSE_OPP_BGAP on 4460. - */ - -/* OMAP4460.FUSE_OPP_BGAP */ -#define OMAP4460_FUSE_OPP_BGAP 0x0 - -/* OMAP4460.TEMP_SENSOR */ -#define OMAP4460_TEMP_SENSOR_CTRL_OFFSET 0xCC - -/* OMAP4460.BANDGAP_CTRL */ -#define OMAP4460_BGAP_CTRL_OFFSET 0x118 - -/* OMAP4460.BANDGAP_COUNTER */ -#define OMAP4460_BGAP_COUNTER_OFFSET 0x11C - -/* OMAP4460.BANDGAP_THRESHOLD */ -#define OMAP4460_BGAP_THRESHOLD_OFFSET 0x120 - -/* OMAP4460.TSHUT_THRESHOLD */ -#define OMAP4460_BGAP_TSHUT_OFFSET 0x124 - -/* OMAP4460.BANDGAP_STATUS */ -#define OMAP4460_BGAP_STATUS_OFFSET 0x128 - -/** - * Register bitfields for OMAP4460 - * - * All the macros bellow define the required bits for - * controlling temperature on OMAP4460. Bit defines are - * grouped by register. - */ -/* OMAP4460.TEMP_SENSOR bits */ -#define OMAP4460_BGAP_TEMPSOFF_MASK BIT(13) -#define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK BIT(11) -#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(10) -#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0) - -/* OMAP4460.BANDGAP_CTRL bits */ -#define OMAP4460_SINGLE_MODE_MASK BIT(31) -#define OMAP4460_MASK_HOT_MASK BIT(1) -#define OMAP4460_MASK_COLD_MASK BIT(0) - -/* OMAP4460.BANDGAP_COUNTER bits */ -#define OMAP4460_COUNTER_MASK (0xffffff << 0) - -/* OMAP4460.BANDGAP_THRESHOLD bits */ -#define OMAP4460_T_HOT_MASK (0x3ff << 16) -#define OMAP4460_T_COLD_MASK (0x3ff << 0) - -/* OMAP4460.TSHUT_THRESHOLD bits */ -#define OMAP4460_TSHUT_HOT_MASK (0x3ff << 16) -#define OMAP4460_TSHUT_COLD_MASK (0x3ff << 0) - -/* OMAP4460.BANDGAP_STATUS bits */ -#define OMAP4460_CLEAN_STOP_MASK BIT(3) -#define OMAP4460_BGAP_ALERT_MASK BIT(2) -#define OMAP4460_HOT_FLAG_MASK BIT(1) -#define OMAP4460_COLD_FLAG_MASK BIT(0) - -/** - * Temperature limits and thresholds for OMAP4460 - * - * All the macros bellow are definitions for handling the - * ADC conversions and representation of temperature limits - * and thresholds for OMAP4460. - */ - -/* ADC conversion table limits */ -#define OMAP4460_ADC_START_VALUE 530 -#define OMAP4460_ADC_END_VALUE 932 -/* bandgap clock limits */ -#define OMAP4460_MAX_FREQ 1500000 -#define OMAP4460_MIN_FREQ 1000000 -/* sensor limits */ -#define OMAP4460_MIN_TEMP -40000 -#define OMAP4460_MAX_TEMP 123000 -#define OMAP4460_HYST_VAL 5000 -/* interrupts thresholds */ -#define OMAP4460_TSHUT_HOT 900 /* 122 deg C */ -#define OMAP4460_TSHUT_COLD 895 /* 100 deg C */ -#define OMAP4460_T_HOT 800 /* 73 deg C */ -#define OMAP4460_T_COLD 795 /* 71 deg C */ - -#endif /* __OMAP4XXX_BANDGAP_H */ diff --git a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c deleted file mode 100644 index eff0c80..0000000 --- a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * OMAP5 thermal driver. - * - * Copyright (C) 2011-2012 Texas Instruments Inc. - * Contact: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include "ti-thermal.h" -#include "ti-bandgap.h" -#include "omap5xxx-bandgap.h" - -/* - * OMAP5430 has three instances of thermal sensor for MPU, GPU & CORE, - * need to describe the individual registers and bit fields. - */ - -/* - * OMAP5430 MPU thermal sensor register offset and bit-fields - */ -static struct temp_sensor_registers -omap5430_mpu_temp_sensor_registers = { - .temp_sensor_ctrl = OMAP5430_TEMP_SENSOR_MPU_OFFSET, - .bgap_tempsoff_mask = OMAP5430_BGAP_TEMPSOFF_MASK, - .bgap_eocz_mask = OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK, - .bgap_dtemp_mask = OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK, - - .bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET, - .mask_hot_mask = OMAP5430_MASK_HOT_MPU_MASK, - .mask_cold_mask = OMAP5430_MASK_COLD_MPU_MASK, - .mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK, - .mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK, - .mask_freeze_mask = OMAP5430_MASK_FREEZE_MPU_MASK, - .mask_clear_mask = OMAP5430_MASK_CLEAR_MPU_MASK, - .mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK, - - - .bgap_counter = OMAP5430_BGAP_CTRL_OFFSET, - .counter_mask = OMAP5430_COUNTER_MASK, - - .bgap_threshold = OMAP5430_BGAP_THRESHOLD_MPU_OFFSET, - .threshold_thot_mask = OMAP5430_T_HOT_MASK, - .threshold_tcold_mask = OMAP5430_T_COLD_MASK, - - .tshut_threshold = OMAP5430_BGAP_TSHUT_MPU_OFFSET, - .tshut_hot_mask = OMAP5430_TSHUT_HOT_MASK, - .tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK, - - .bgap_status = OMAP5430_BGAP_STATUS_OFFSET, - .status_clean_stop_mask = 0x0, - .status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK, - .status_hot_mask = OMAP5430_HOT_MPU_FLAG_MASK, - .status_cold_mask = OMAP5430_COLD_MPU_FLAG_MASK, - - .bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_MPU_OFFSET, - .ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_MPU_0_OFFSET, - .ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_MPU_1_OFFSET, - .ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_MPU_2_OFFSET, - .ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_MPU_3_OFFSET, - .ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_MPU_4_OFFSET, - .bgap_efuse = OMAP5430_FUSE_OPP_BGAP_MPU, -}; - -/* - * OMAP5430 GPU thermal sensor register offset and bit-fields - */ -static struct temp_sensor_registers -omap5430_gpu_temp_sensor_registers = { - .temp_sensor_ctrl = OMAP5430_TEMP_SENSOR_GPU_OFFSET, - .bgap_tempsoff_mask = OMAP5430_BGAP_TEMPSOFF_MASK, - .bgap_eocz_mask = OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK, - .bgap_dtemp_mask = OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK, - - .bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET, - .mask_hot_mask = OMAP5430_MASK_HOT_GPU_MASK, - .mask_cold_mask = OMAP5430_MASK_COLD_GPU_MASK, - .mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK, - .mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK, - .mask_freeze_mask = OMAP5430_MASK_FREEZE_GPU_MASK, - .mask_clear_mask = OMAP5430_MASK_CLEAR_GPU_MASK, - .mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK, - - .bgap_counter = OMAP5430_BGAP_CTRL_OFFSET, - .counter_mask = OMAP5430_COUNTER_MASK, - - .bgap_threshold = OMAP5430_BGAP_THRESHOLD_GPU_OFFSET, - .threshold_thot_mask = OMAP5430_T_HOT_MASK, - .threshold_tcold_mask = OMAP5430_T_COLD_MASK, - - .tshut_threshold = OMAP5430_BGAP_TSHUT_GPU_OFFSET, - .tshut_hot_mask = OMAP5430_TSHUT_HOT_MASK, - .tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK, - - .bgap_status = OMAP5430_BGAP_STATUS_OFFSET, - .status_clean_stop_mask = 0x0, - .status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK, - .status_hot_mask = OMAP5430_HOT_GPU_FLAG_MASK, - .status_cold_mask = OMAP5430_COLD_GPU_FLAG_MASK, - - .bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_GPU_OFFSET, - .ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_GPU_0_OFFSET, - .ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_GPU_1_OFFSET, - .ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_GPU_2_OFFSET, - .ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_GPU_3_OFFSET, - .ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_GPU_4_OFFSET, - - .bgap_efuse = OMAP5430_FUSE_OPP_BGAP_GPU, -}; - -/* - * OMAP5430 CORE thermal sensor register offset and bit-fields - */ -static struct temp_sensor_registers -omap5430_core_temp_sensor_registers = { - .temp_sensor_ctrl = OMAP5430_TEMP_SENSOR_CORE_OFFSET, - .bgap_tempsoff_mask = OMAP5430_BGAP_TEMPSOFF_MASK, - .bgap_eocz_mask = OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK, - .bgap_dtemp_mask = OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK, - - .bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET, - .mask_hot_mask = OMAP5430_MASK_HOT_CORE_MASK, - .mask_cold_mask = OMAP5430_MASK_COLD_CORE_MASK, - .mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK, - .mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK, - .mask_freeze_mask = OMAP5430_MASK_FREEZE_CORE_MASK, - .mask_clear_mask = OMAP5430_MASK_CLEAR_CORE_MASK, - .mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK, - - .bgap_counter = OMAP5430_BGAP_CTRL_OFFSET, - .counter_mask = OMAP5430_COUNTER_MASK, - - .bgap_threshold = OMAP5430_BGAP_THRESHOLD_CORE_OFFSET, - .threshold_thot_mask = OMAP5430_T_HOT_MASK, - .threshold_tcold_mask = OMAP5430_T_COLD_MASK, - - .tshut_threshold = OMAP5430_BGAP_TSHUT_CORE_OFFSET, - .tshut_hot_mask = OMAP5430_TSHUT_HOT_MASK, - .tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK, - - .bgap_status = OMAP5430_BGAP_STATUS_OFFSET, - .status_clean_stop_mask = 0x0, - .status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK, - .status_hot_mask = OMAP5430_HOT_CORE_FLAG_MASK, - .status_cold_mask = OMAP5430_COLD_CORE_FLAG_MASK, - - .bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_CORE_OFFSET, - .ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_CORE_0_OFFSET, - .ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_CORE_1_OFFSET, - .ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_CORE_2_OFFSET, - .ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_CORE_3_OFFSET, - .ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_CORE_4_OFFSET, - - .bgap_efuse = OMAP5430_FUSE_OPP_BGAP_CORE, -}; - -/* Thresholds and limits for OMAP5430 MPU temperature sensor */ -static struct temp_sensor_data omap5430_mpu_temp_sensor_data = { - .tshut_hot = OMAP5430_MPU_TSHUT_HOT, - .tshut_cold = OMAP5430_MPU_TSHUT_COLD, - .t_hot = OMAP5430_MPU_T_HOT, - .t_cold = OMAP5430_MPU_T_COLD, - .min_freq = OMAP5430_MPU_MIN_FREQ, - .max_freq = OMAP5430_MPU_MAX_FREQ, - .max_temp = OMAP5430_MPU_MAX_TEMP, - .min_temp = OMAP5430_MPU_MIN_TEMP, - .hyst_val = OMAP5430_MPU_HYST_VAL, - .update_int1 = 1000, - .update_int2 = 2000, -}; - -/* Thresholds and limits for OMAP5430 GPU temperature sensor */ -static struct temp_sensor_data omap5430_gpu_temp_sensor_data = { - .tshut_hot = OMAP5430_GPU_TSHUT_HOT, - .tshut_cold = OMAP5430_GPU_TSHUT_COLD, - .t_hot = OMAP5430_GPU_T_HOT, - .t_cold = OMAP5430_GPU_T_COLD, - .min_freq = OMAP5430_GPU_MIN_FREQ, - .max_freq = OMAP5430_GPU_MAX_FREQ, - .max_temp = OMAP5430_GPU_MAX_TEMP, - .min_temp = OMAP5430_GPU_MIN_TEMP, - .hyst_val = OMAP5430_GPU_HYST_VAL, - .update_int1 = 1000, - .update_int2 = 2000, -}; - -/* Thresholds and limits for OMAP5430 CORE temperature sensor */ -static struct temp_sensor_data omap5430_core_temp_sensor_data = { - .tshut_hot = OMAP5430_CORE_TSHUT_HOT, - .tshut_cold = OMAP5430_CORE_TSHUT_COLD, - .t_hot = OMAP5430_CORE_T_HOT, - .t_cold = OMAP5430_CORE_T_COLD, - .min_freq = OMAP5430_CORE_MIN_FREQ, - .max_freq = OMAP5430_CORE_MAX_FREQ, - .max_temp = OMAP5430_CORE_MAX_TEMP, - .min_temp = OMAP5430_CORE_MIN_TEMP, - .hyst_val = OMAP5430_CORE_HYST_VAL, - .update_int1 = 1000, - .update_int2 = 2000, -}; - -/* - * OMAP54xx ES2.0 : Temperature values in milli degree celsius - * ADC code values from 540 to 945 - */ -static int -omap5430_adc_to_temp[ - OMAP5430_ADC_END_VALUE - OMAP5430_ADC_START_VALUE + 1] = { - /* Index 540 - 549 */ - -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200, - -37800, - /* Index 550 - 559 */ - -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200, -33800, - -33400, - /* Index 560 - 569 */ - -33000, -32600, -32200, -31800, -31400, -31000, -30600, -30200, -29800, - -29400, - /* Index 570 - 579 */ - -29000, -28600, -28200, -27700, -27100, -26600, -26200, -25800, -25400, - -25000, - /* Index 580 - 589 */ - -24600, -24200, -23800, -23400, -23000, -22600, -22200, -21600, -21400, - -21000, - /* Index 590 - 599 */ - -20500, -19900, -19400, -19000, -18600, -18200, -17800, -17400, -17000, - -16600, - /* Index 600 - 609 */ - -16200, -15800, -15400, -15000, -14600, -14200, -13800, -13400, -13000, - -12500, - /* Index 610 - 619 */ - -11900, -11400, -11000, -10600, -10200, -9800, -9400, -9000, -8600, - -8200, - /* Index 620 - 629 */ - -7800, -7400, -7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, - /* Index 630 - 639 */ - -3400, -3000, -2600, -2200, -1800, -1400, -1000, -600, -200, 200, - /* Index 640 - 649 */ - 600, 1000, 1400, 1800, 2200, 2600, 3000, 3400, 3900, 4500, - /* Index 650 - 659 */ - 5000, 5400, 5800, 6200, 6600, 7000, 7400, 7800, 8200, 8600, - /* Index 660 - 669 */ - 9000, 9400, 9800, 10200, 10600, 11000, 11400, 11800, 12200, 12700, - /* Index 670 - 679 */ - 13300, 13800, 14200, 14600, 15000, 15400, 15800, 16200, 16600, 17000, - /* Index 680 - 689 */ - 17400, 17800, 18200, 18600, 19000, 19400, 19800, 20200, 20600, 21100, - /* Index 690 - 699 */ - 21400, 21900, 22500, 23000, 23400, 23800, 24200, 24600, 25000, 25400, - /* Index 700 - 709 */ - 25800, 26200, 26600, 27000, 27400, 27800, 28200, 28600, 29000, 29400, - /* Index 710 - 719 */ - 29800, 30200, 30600, 31000, 31400, 31900, 32500, 33000, 33400, 33800, - /* Index 720 - 729 */ - 34200, 34600, 35000, 35400, 35800, 36200, 36600, 37000, 37400, 37800, - /* Index 730 - 739 */ - 38200, 38600, 39000, 39400, 39800, 40200, 40600, 41000, 41400, 41800, - /* Index 740 - 749 */ - 42200, 42600, 43100, 43700, 44200, 44600, 45000, 45400, 45800, 46200, - /* Index 750 - 759 */ - 46600, 47000, 47400, 47800, 48200, 48600, 49000, 49400, 49800, 50200, - /* Index 760 - 769 */ - 50600, 51000, 51400, 51800, 52200, 52600, 53000, 53400, 53800, 54200, - /* Index 770 - 779 */ - 54600, 55000, 55400, 55900, 56500, 57000, 57400, 57800, 58200, 58600, - /* Index 780 - 789 */ - 59000, 59400, 59800, 60200, 60600, 61000, 61400, 61800, 62200, 62600, - /* Index 790 - 799 */ - 63000, 63400, 63800, 64200, 64600, 65000, 65400, 65800, 66200, 66600, - /* Index 800 - 809 */ - 67000, 67400, 67800, 68200, 68600, 69000, 69400, 69800, 70200, 70600, - /* Index 810 - 819 */ - 71000, 71500, 72100, 72600, 73000, 73400, 73800, 74200, 74600, 75000, - /* Index 820 - 829 */ - 75400, 75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600, 79000, - /* Index 830 - 839 */ - 79400, 79800, 80200, 80600, 81000, 81400, 81800, 82200, 82600, 83000, - /* Index 840 - 849 */ - 83400, 83800, 84200, 84600, 85000, 85400, 85800, 86200, 86600, 87000, - /* Index 850 - 859 */ - 87400, 87800, 88200, 88600, 89000, 89400, 89800, 90200, 90600, 91000, - /* Index 860 - 869 */ - 91400, 91800, 92200, 92600, 93000, 93400, 93800, 94200, 94600, 95000, - /* Index 870 - 879 */ - 95400, 95800, 96200, 96600, 97000, 97500, 98100, 98600, 99000, 99400, - /* Index 880 - 889 */ - 99800, 100200, 100600, 101000, 101400, 101800, 102200, 102600, 103000, - 103400, - /* Index 890 - 899 */ - 103800, 104200, 104600, 105000, 105400, 105800, 106200, 106600, 107000, - 107400, - /* Index 900 - 909 */ - 107800, 108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000, - 111400, - /* Index 910 - 919 */ - 111800, 112200, 112600, 113000, 113400, 113800, 114200, 114600, 115000, - 115400, - /* Index 920 - 929 */ - 115800, 116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, - 119400, - /* Index 930 - 939 */ - 119800, 120200, 120600, 121000, 121400, 121800, 122400, 122600, 123000, - 123400, - /* Index 940 - 945 */ - 123800, 1242000, 124600, 124900, 125000, 125000, -}; - -/* OMAP54xx ES2.0 data */ -const struct ti_bandgap_data omap5430_data = { - .features = TI_BANDGAP_FEATURE_TSHUT_CONFIG | - TI_BANDGAP_FEATURE_FREEZE_BIT | - TI_BANDGAP_FEATURE_TALERT | - TI_BANDGAP_FEATURE_COUNTER_DELAY | - TI_BANDGAP_FEATURE_HISTORY_BUFFER, - .fclock_name = "l3instr_ts_gclk_div", - .div_ck_name = "l3instr_ts_gclk_div", - .conv_table = omap5430_adc_to_temp, - .adc_start_val = OMAP5430_ADC_START_VALUE, - .adc_end_val = OMAP5430_ADC_END_VALUE, - .expose_sensor = ti_thermal_expose_sensor, - .remove_sensor = ti_thermal_remove_sensor, - .report_temperature = ti_thermal_report_sensor_temperature, - .sensors = { - { - .registers = &omap5430_mpu_temp_sensor_registers, - .ts_data = &omap5430_mpu_temp_sensor_data, - .domain = "cpu", - .register_cooling = ti_thermal_register_cpu_cooling, - .unregister_cooling = ti_thermal_unregister_cpu_cooling, - .slope = OMAP_GRADIENT_SLOPE_5430_CPU, - .constant = OMAP_GRADIENT_CONST_5430_CPU, - .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU, - .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_5430_CPU, - }, - { - .registers = &omap5430_gpu_temp_sensor_registers, - .ts_data = &omap5430_gpu_temp_sensor_data, - .domain = "gpu", - .slope = OMAP_GRADIENT_SLOPE_5430_GPU, - .constant = OMAP_GRADIENT_CONST_5430_GPU, - .slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU, - .constant_pcb = OMAP_GRADIENT_CONST_W_PCB_5430_GPU, - }, - { - .registers = &omap5430_core_temp_sensor_registers, - .ts_data = &omap5430_core_temp_sensor_data, - .domain = "core", - }, - }, - .sensor_count = 3, -}; diff --git a/drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h b/drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h deleted file mode 100644 index 400b55d..0000000 --- a/drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * OMAP5xxx bandgap registers, bitfields and temperature definitions - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * Contact: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ -#ifndef __OMAP5XXX_BANDGAP_H -#define __OMAP5XXX_BANDGAP_H - -/** - * *** OMAP5430 *** - * - * Below, in sequence, are the Register definitions, - * the bitfields and the temperature definitions for OMAP5430. - */ - -/** - * OMAP5430 register definitions - * - * Registers are defined as offsets. The offsets are - * relative to FUSE_OPP_BGAP_GPU on 5430. - * - * Register below are grouped by domain (not necessarily in offset order) - */ - -/* OMAP5430.GPU register offsets */ -#define OMAP5430_FUSE_OPP_BGAP_GPU 0x0 -#define OMAP5430_TEMP_SENSOR_GPU_OFFSET 0x150 -#define OMAP5430_BGAP_THRESHOLD_GPU_OFFSET 0x1A8 -#define OMAP5430_BGAP_TSHUT_GPU_OFFSET 0x1B4 -#define OMAP5430_BGAP_CUMUL_DTEMP_GPU_OFFSET 0x1C0 -#define OMAP5430_BGAP_DTEMP_GPU_0_OFFSET 0x1F4 -#define OMAP5430_BGAP_DTEMP_GPU_1_OFFSET 0x1F8 -#define OMAP5430_BGAP_DTEMP_GPU_2_OFFSET 0x1FC -#define OMAP5430_BGAP_DTEMP_GPU_3_OFFSET 0x200 -#define OMAP5430_BGAP_DTEMP_GPU_4_OFFSET 0x204 - -/* OMAP5430.MPU register offsets */ -#define OMAP5430_FUSE_OPP_BGAP_MPU 0x4 -#define OMAP5430_TEMP_SENSOR_MPU_OFFSET 0x14C -#define OMAP5430_BGAP_THRESHOLD_MPU_OFFSET 0x1A4 -#define OMAP5430_BGAP_TSHUT_MPU_OFFSET 0x1B0 -#define OMAP5430_BGAP_CUMUL_DTEMP_MPU_OFFSET 0x1BC -#define OMAP5430_BGAP_DTEMP_MPU_0_OFFSET 0x1E0 -#define OMAP5430_BGAP_DTEMP_MPU_1_OFFSET 0x1E4 -#define OMAP5430_BGAP_DTEMP_MPU_2_OFFSET 0x1E8 -#define OMAP5430_BGAP_DTEMP_MPU_3_OFFSET 0x1EC -#define OMAP5430_BGAP_DTEMP_MPU_4_OFFSET 0x1F0 - -/* OMAP5430.MPU register offsets */ -#define OMAP5430_FUSE_OPP_BGAP_CORE 0x8 -#define OMAP5430_TEMP_SENSOR_CORE_OFFSET 0x154 -#define OMAP5430_BGAP_THRESHOLD_CORE_OFFSET 0x1AC -#define OMAP5430_BGAP_TSHUT_CORE_OFFSET 0x1B8 -#define OMAP5430_BGAP_CUMUL_DTEMP_CORE_OFFSET 0x1C4 -#define OMAP5430_BGAP_DTEMP_CORE_0_OFFSET 0x208 -#define OMAP5430_BGAP_DTEMP_CORE_1_OFFSET 0x20C -#define OMAP5430_BGAP_DTEMP_CORE_2_OFFSET 0x210 -#define OMAP5430_BGAP_DTEMP_CORE_3_OFFSET 0x214 -#define OMAP5430_BGAP_DTEMP_CORE_4_OFFSET 0x218 - -/* OMAP5430.common register offsets */ -#define OMAP5430_BGAP_CTRL_OFFSET 0x1A0 -#define OMAP5430_BGAP_STATUS_OFFSET 0x1C8 - -/** - * Register bitfields for OMAP5430 - * - * All the macros bellow define the required bits for - * controlling temperature on OMAP5430. Bit defines are - * grouped by register. - */ - -/* OMAP5430.TEMP_SENSOR */ -#define OMAP5430_BGAP_TEMP_SENSOR_SOC_MASK BIT(12) -#define OMAP5430_BGAP_TEMPSOFF_MASK BIT(11) -#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(10) -#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0) - -/* OMAP5430.BANDGAP_CTRL */ -#define OMAP5430_MASK_SIDLEMODE_MASK (0x3 << 30) -#define OMAP5430_MASK_COUNTER_DELAY_MASK (0x7 << 27) -#define OMAP5430_MASK_FREEZE_CORE_MASK BIT(23) -#define OMAP5430_MASK_FREEZE_GPU_MASK BIT(22) -#define OMAP5430_MASK_FREEZE_MPU_MASK BIT(21) -#define OMAP5430_MASK_CLEAR_CORE_MASK BIT(20) -#define OMAP5430_MASK_CLEAR_GPU_MASK BIT(19) -#define OMAP5430_MASK_CLEAR_MPU_MASK BIT(18) -#define OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK BIT(17) -#define OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK BIT(16) -#define OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK BIT(15) -#define OMAP5430_MASK_HOT_CORE_MASK BIT(5) -#define OMAP5430_MASK_COLD_CORE_MASK BIT(4) -#define OMAP5430_MASK_HOT_GPU_MASK BIT(3) -#define OMAP5430_MASK_COLD_GPU_MASK BIT(2) -#define OMAP5430_MASK_HOT_MPU_MASK BIT(1) -#define OMAP5430_MASK_COLD_MPU_MASK BIT(0) - -/* OMAP5430.BANDGAP_COUNTER */ -#define OMAP5430_COUNTER_MASK (0xffffff << 0) - -/* OMAP5430.BANDGAP_THRESHOLD */ -#define OMAP5430_T_HOT_MASK (0x3ff << 16) -#define OMAP5430_T_COLD_MASK (0x3ff << 0) - -/* OMAP5430.TSHUT_THRESHOLD */ -#define OMAP5430_TSHUT_HOT_MASK (0x3ff << 16) -#define OMAP5430_TSHUT_COLD_MASK (0x3ff << 0) - -/* OMAP5430.BANDGAP_CUMUL_DTEMP_MPU */ -#define OMAP5430_CUMUL_DTEMP_MPU_MASK (0xffffffff << 0) - -/* OMAP5430.BANDGAP_CUMUL_DTEMP_GPU */ -#define OMAP5430_CUMUL_DTEMP_GPU_MASK (0xffffffff << 0) - -/* OMAP5430.BANDGAP_CUMUL_DTEMP_CORE */ -#define OMAP5430_CUMUL_DTEMP_CORE_MASK (0xffffffff << 0) - -/* OMAP5430.BANDGAP_STATUS */ -#define OMAP5430_BGAP_ALERT_MASK BIT(31) -#define OMAP5430_HOT_CORE_FLAG_MASK BIT(5) -#define OMAP5430_COLD_CORE_FLAG_MASK BIT(4) -#define OMAP5430_HOT_GPU_FLAG_MASK BIT(3) -#define OMAP5430_COLD_GPU_FLAG_MASK BIT(2) -#define OMAP5430_HOT_MPU_FLAG_MASK BIT(1) -#define OMAP5430_COLD_MPU_FLAG_MASK BIT(0) - -/** - * Temperature limits and thresholds for OMAP5430 - * - * All the macros bellow are definitions for handling the - * ADC conversions and representation of temperature limits - * and thresholds for OMAP5430. Definitions are grouped - * by temperature domain. - */ - -/* OMAP5430.common temperature definitions */ -/* ADC conversion table limits */ -#define OMAP5430_ADC_START_VALUE 540 -#define OMAP5430_ADC_END_VALUE 945 - -/* OMAP5430.GPU temperature definitions */ -/* bandgap clock limits */ -#define OMAP5430_GPU_MAX_FREQ 1500000 -#define OMAP5430_GPU_MIN_FREQ 1000000 -/* sensor limits */ -#define OMAP5430_GPU_MIN_TEMP -40000 -#define OMAP5430_GPU_MAX_TEMP 125000 -#define OMAP5430_GPU_HYST_VAL 5000 -/* interrupts thresholds */ -#define OMAP5430_GPU_TSHUT_HOT 915 -#define OMAP5430_GPU_TSHUT_COLD 900 -#define OMAP5430_GPU_T_HOT 800 -#define OMAP5430_GPU_T_COLD 795 - -/* OMAP5430.MPU temperature definitions */ -/* bandgap clock limits */ -#define OMAP5430_MPU_MAX_FREQ 1500000 -#define OMAP5430_MPU_MIN_FREQ 1000000 -/* sensor limits */ -#define OMAP5430_MPU_MIN_TEMP -40000 -#define OMAP5430_MPU_MAX_TEMP 125000 -#define OMAP5430_MPU_HYST_VAL 5000 -/* interrupts thresholds */ -#define OMAP5430_MPU_TSHUT_HOT 915 -#define OMAP5430_MPU_TSHUT_COLD 900 -#define OMAP5430_MPU_T_HOT 800 -#define OMAP5430_MPU_T_COLD 795 - -/* OMAP5430.CORE temperature definitions */ -/* bandgap clock limits */ -#define OMAP5430_CORE_MAX_FREQ 1500000 -#define OMAP5430_CORE_MIN_FREQ 1000000 -/* sensor limits */ -#define OMAP5430_CORE_MIN_TEMP -40000 -#define OMAP5430_CORE_MAX_TEMP 125000 -#define OMAP5430_CORE_HYST_VAL 5000 -/* interrupts thresholds */ -#define OMAP5430_CORE_TSHUT_HOT 915 -#define OMAP5430_CORE_TSHUT_COLD 900 -#define OMAP5430_CORE_T_HOT 800 -#define OMAP5430_CORE_T_COLD 795 - -#endif /* __OMAP5XXX_BANDGAP_H */ diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c deleted file mode 100644 index f20c1cf..0000000 --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c +++ /dev/null @@ -1,1546 +0,0 @@ -/* - * TI Bandgap temperature sensor driver - * - * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ - * Author: J Keerthy <j-keerthy@ti.com> - * Author: Moiz Sonasath <m-sonasath@ti.com> - * Couple of fixes, DT and MFD adaptation: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/module.h> -#include <linux/export.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/reboot.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> -#include <linux/of_irq.h> -#include <linux/io.h> - -#include "ti-bandgap.h" - -/*** Helper functions to access registers and their bitfields ***/ - -/** - * ti_bandgap_readl() - simple read helper function - * @bgp: pointer to ti_bandgap structure - * @reg: desired register (offset) to be read - * - * Helper function to read bandgap registers. It uses the io remapped area. - * Return: the register value. - */ -static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg) -{ - return readl(bgp->base + reg); -} - -/** - * ti_bandgap_writel() - simple write helper function - * @bgp: pointer to ti_bandgap structure - * @val: desired register value to be written - * @reg: desired register (offset) to be written - * - * Helper function to write bandgap registers. It uses the io remapped area. - */ -static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg) -{ - writel(val, bgp->base + reg); -} - -/** - * DOC: macro to update bits. - * - * RMW_BITS() - used to read, modify and update bandgap bitfields. - * The value passed will be shifted. - */ -#define RMW_BITS(bgp, id, reg, mask, val) \ -do { \ - struct temp_sensor_registers *t; \ - u32 r; \ - \ - t = bgp->conf->sensors[(id)].registers; \ - r = ti_bandgap_readl(bgp, t->reg); \ - r &= ~t->mask; \ - r |= (val) << __ffs(t->mask); \ - ti_bandgap_writel(bgp, r, t->reg); \ -} while (0) - -/*** Basic helper functions ***/ - -/** - * ti_bandgap_power() - controls the power state of a bandgap device - * @bgp: pointer to ti_bandgap structure - * @on: desired power state (1 - on, 0 - off) - * - * Used to power on/off a bandgap device instance. Only used on those - * that features tempsoff bit. - * - * Return: 0 on success, -ENOTSUPP if tempsoff is not supported. - */ -static int ti_bandgap_power(struct ti_bandgap *bgp, bool on) -{ - int i, ret = 0; - - if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH)) { - ret = -ENOTSUPP; - goto exit; - } - - for (i = 0; i < bgp->conf->sensor_count; i++) - /* active on 0 */ - RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on); - -exit: - return ret; -} - -/** - * ti_bandgap_read_temp() - helper function to read sensor temperature - * @bgp: pointer to ti_bandgap structure - * @id: bandgap sensor id - * - * Function to concentrate the steps to read sensor temperature register. - * This function is desired because, depending on bandgap device version, - * it might be needed to freeze the bandgap state machine, before fetching - * the register value. - * - * Return: temperature in ADC values. - */ -static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id) -{ - struct temp_sensor_registers *tsr; - u32 temp, reg; - - tsr = bgp->conf->sensors[id].registers; - reg = tsr->temp_sensor_ctrl; - - if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) { - RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1); - /* - * In case we cannot read from cur_dtemp / dtemp_0, - * then we read from the last valid temp read - */ - reg = tsr->ctrl_dtemp_1; - } - - /* read temperature */ - temp = ti_bandgap_readl(bgp, reg); - temp &= tsr->bgap_dtemp_mask; - - if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) - RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0); - - return temp; -} - -/*** IRQ handlers ***/ - -/** - * ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs - * @irq: IRQ number - * @data: private data (struct ti_bandgap *) - * - * This is the Talert handler. Use it only if bandgap device features - * HAS(TALERT). This handler goes over all sensors and checks their - * conditions and acts accordingly. In case there are events pending, - * it will reset the event mask to wait for the opposite event (next event). - * Every time there is a new event, it will be reported to thermal layer. - * - * Return: IRQ_HANDLED - */ -static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data) -{ - struct ti_bandgap *bgp = data; - struct temp_sensor_registers *tsr; - u32 t_hot = 0, t_cold = 0, ctrl; - int i; - - spin_lock(&bgp->lock); - for (i = 0; i < bgp->conf->sensor_count; i++) { - tsr = bgp->conf->sensors[i].registers; - ctrl = ti_bandgap_readl(bgp, tsr->bgap_status); - - /* Read the status of t_hot */ - t_hot = ctrl & tsr->status_hot_mask; - - /* Read the status of t_cold */ - t_cold = ctrl & tsr->status_cold_mask; - - if (!t_cold && !t_hot) - continue; - - ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); - /* - * One TALERT interrupt: Two sources - * If the interrupt is due to t_hot then mask t_hot and - * and unmask t_cold else mask t_cold and unmask t_hot - */ - if (t_hot) { - ctrl &= ~tsr->mask_hot_mask; - ctrl |= tsr->mask_cold_mask; - } else if (t_cold) { - ctrl &= ~tsr->mask_cold_mask; - ctrl |= tsr->mask_hot_mask; - } - - ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); - - dev_dbg(bgp->dev, - "%s: IRQ from %s sensor: hotevent %d coldevent %d\n", - __func__, bgp->conf->sensors[i].domain, - t_hot, t_cold); - - /* report temperature to whom may concern */ - if (bgp->conf->report_temperature) - bgp->conf->report_temperature(bgp, i); - } - spin_unlock(&bgp->lock); - - return IRQ_HANDLED; -} - -/** - * ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal - * @irq: IRQ number - * @data: private data (unused) - * - * This is the Tshut handler. Use it only if bandgap device features - * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown - * the system. - * - * Return: IRQ_HANDLED - */ -static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data) -{ - pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n", - __func__); - - orderly_poweroff(true); - - return IRQ_HANDLED; -} - -/*** Helper functions which manipulate conversion ADC <-> mi Celsius ***/ - -/** - * ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale - * @bgp: struct ti_bandgap pointer - * @adc_val: value in ADC representation - * @t: address where to write the resulting temperature in mCelsius - * - * Simple conversion from ADC representation to mCelsius. In case the ADC value - * is out of the ADC conv table range, it returns -ERANGE, 0 on success. - * The conversion table is indexed by the ADC values. - * - * Return: 0 if conversion was successful, else -ERANGE in case the @adc_val - * argument is out of the ADC conv table range. - */ -static -int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t) -{ - const struct ti_bandgap_data *conf = bgp->conf; - int ret = 0; - - /* look up for temperature in the table and return the temperature */ - if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) { - ret = -ERANGE; - goto exit; - } - - *t = bgp->conf->conv_table[adc_val - conf->adc_start_val]; - -exit: - return ret; -} - -/** - * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale - * @bgp: struct ti_bandgap pointer - * @temp: value in mCelsius - * @adc: address where to write the resulting temperature in ADC representation - * - * Simple conversion from mCelsius to ADC values. In case the temp value - * is out of the ADC conv table range, it returns -ERANGE, 0 on success. - * The conversion table is indexed by the ADC values. - * - * Return: 0 if conversion was successful, else -ERANGE in case the @temp - * argument is out of the ADC conv table range. - */ -static -int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc) -{ - const struct ti_bandgap_data *conf = bgp->conf; - const int *conv_table = bgp->conf->conv_table; - int high, low, mid, ret = 0; - - low = 0; - high = conf->adc_end_val - conf->adc_start_val; - mid = (high + low) / 2; - - if (temp < conv_table[low] || temp > conv_table[high]) { - ret = -ERANGE; - goto exit; - } - - while (low < high) { - if (temp < conv_table[mid]) - high = mid - 1; - else - low = mid + 1; - mid = (low + high) / 2; - } - - *adc = conf->adc_start_val + low; - -exit: - return ret; -} - -/** - * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value - * @bgp: struct ti_bandgap pointer - * @adc_val: temperature value in ADC representation - * @hyst_val: hysteresis value in mCelsius - * @sum: address where to write the resulting temperature (in ADC scale) - * - * Adds an hysteresis value (in mCelsius) to a ADC temperature value. - * - * Return: 0 on success, -ERANGE otherwise. - */ -static -int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val, - u32 *sum) -{ - int temp, ret; - - /* - * Need to add in the mcelsius domain, so we have a temperature - * the conv_table range - */ - ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp); - if (ret < 0) - goto exit; - - temp += hyst_val; - - ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum); - -exit: - return ret; -} - -/*** Helper functions handling device Alert/Shutdown signals ***/ - -/** - * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold - * @bgp: struct ti_bandgap pointer - * @id: bandgap sensor id - * @t_hot: hot temperature value to trigger alert signal - * @t_cold: cold temperature value to trigger alert signal - * - * Checks the requested t_hot and t_cold values and configures the IRQ event - * masks accordingly. Call this function only if bandgap features HAS(TALERT). - */ -static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id, - u32 t_hot, u32 t_cold) -{ - struct temp_sensor_registers *tsr; - u32 temp, reg_val; - - /* Read the current on die temperature */ - temp = ti_bandgap_read_temp(bgp, id); - - tsr = bgp->conf->sensors[id].registers; - reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); - - if (temp < t_hot) - reg_val |= tsr->mask_hot_mask; - else - reg_val &= ~tsr->mask_hot_mask; - - if (t_cold < temp) - reg_val |= tsr->mask_cold_mask; - else - reg_val &= ~tsr->mask_cold_mask; - ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl); -} - -/** - * ti_bandgap_update_alert_threshold() - sequence to update thresholds - * @bgp: struct ti_bandgap pointer - * @id: bandgap sensor id - * @val: value (ADC) of a new threshold - * @hot: desired threshold to be updated. true if threshold hot, false if - * threshold cold - * - * It will program the required thresholds (hot and cold) for TALERT signal. - * This function can be used to update t_hot or t_cold, depending on @hot value. - * It checks the resulting t_hot and t_cold values, based on the new passed @val - * and configures the thresholds so that t_hot is always greater than t_cold. - * Call this function only if bandgap features HAS(TALERT). - * - * Return: 0 if no error, else corresponding error - */ -static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, - int val, bool hot) -{ - struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data; - struct temp_sensor_registers *tsr; - u32 thresh_val, reg_val, t_hot, t_cold; - int err = 0; - - tsr = bgp->conf->sensors[id].registers; - - /* obtain the current value */ - thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold); - t_cold = (thresh_val & tsr->threshold_tcold_mask) >> - __ffs(tsr->threshold_tcold_mask); - t_hot = (thresh_val & tsr->threshold_thot_mask) >> - __ffs(tsr->threshold_thot_mask); - if (hot) - t_hot = val; - else - t_cold = val; - - if (t_cold > t_hot) { - if (hot) - err = ti_bandgap_add_hyst(bgp, t_hot, - -ts_data->hyst_val, - &t_cold); - else - err = ti_bandgap_add_hyst(bgp, t_cold, - ts_data->hyst_val, - &t_hot); - } - - /* write the new threshold values */ - reg_val = thresh_val & - ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask); - reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) | - (t_cold << __ffs(tsr->threshold_tcold_mask)); - ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold); - - if (err) { - dev_err(bgp->dev, "failed to reprogram thot threshold\n"); - err = -EIO; - goto exit; - } - - ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold); -exit: - return err; -} - -/** - * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap - * @bgp: struct ti_bandgap pointer - * @id: bandgap sensor id - * - * Checks if the bandgap pointer is valid and if the sensor id is also - * applicable. - * - * Return: 0 if no errors, -EINVAL for invalid @bgp pointer or -ERANGE if - * @id cannot index @bgp sensors. - */ -static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id) -{ - int ret = 0; - - if (IS_ERR_OR_NULL(bgp)) { - pr_err("%s: invalid bandgap pointer\n", __func__); - ret = -EINVAL; - goto exit; - } - - if ((id < 0) || (id >= bgp->conf->sensor_count)) { - dev_err(bgp->dev, "%s: sensor id out of range (%d)\n", - __func__, id); - ret = -ERANGE; - } - -exit: - return ret; -} - -/** - * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot - * @bgp: struct ti_bandgap pointer - * @id: bandgap sensor id - * @val: value (mCelsius) of a new threshold - * @hot: desired threshold to be updated. true if threshold hot, false if - * threshold cold - * - * It will update the required thresholds (hot and cold) for TALERT signal. - * This function can be used to update t_hot or t_cold, depending on @hot value. - * Validates the mCelsius range and update the requested threshold. - * Call this function only if bandgap features HAS(TALERT). - * - * Return: 0 if no error, else corresponding error value. - */ -static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val, - bool hot) -{ - struct temp_sensor_data *ts_data; - struct temp_sensor_registers *tsr; - u32 adc_val; - int ret; - - ret = ti_bandgap_validate(bgp, id); - if (ret) - goto exit; - - if (!TI_BANDGAP_HAS(bgp, TALERT)) { - ret = -ENOTSUPP; - goto exit; - } - - ts_data = bgp->conf->sensors[id].ts_data; - tsr = bgp->conf->sensors[id].registers; - if (hot) { - if (val < ts_data->min_temp + ts_data->hyst_val) - ret = -EINVAL; - } else { - if (val > ts_data->max_temp + ts_data->hyst_val) - ret = -EINVAL; - } - - if (ret) - goto exit; - - ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val); - if (ret < 0) - goto exit; - - spin_lock(&bgp->lock); - ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot); - spin_unlock(&bgp->lock); - -exit: - return ret; -} - -/** - * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot - * @bgp: struct ti_bandgap pointer - * @id: bandgap sensor id - * @val: value (mCelsius) of a threshold - * @hot: desired threshold to be read. true if threshold hot, false if - * threshold cold - * - * It will fetch the required thresholds (hot and cold) for TALERT signal. - * This function can be used to read t_hot or t_cold, depending on @hot value. - * Call this function only if bandgap features HAS(TALERT). - * - * Return: 0 if no error, -ENOTSUPP if it has no TALERT support, or the - * corresponding error value if some operation fails. - */ -static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id, - int *val, bool hot) -{ - struct temp_sensor_registers *tsr; - u32 temp, mask; - int ret = 0; - - ret = ti_bandgap_validate(bgp, id); - if (ret) - goto exit; - - if (!TI_BANDGAP_HAS(bgp, TALERT)) { - ret = -ENOTSUPP; - goto exit; - } - - tsr = bgp->conf->sensors[id].registers; - if (hot) - mask = tsr->threshold_thot_mask; - else - mask = tsr->threshold_tcold_mask; - - temp = ti_bandgap_readl(bgp, tsr->bgap_threshold); - temp = (temp & mask) >> __ffs(mask); - ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp); - if (ret) { - dev_err(bgp->dev, "failed to read thot\n"); - ret = -EIO; - goto exit; - } - - *val = temp; - -exit: - return ret; -} - -/*** Exposed APIs ***/ - -/** - * ti_bandgap_read_thot() - reads sensor current thot - * @bgp: pointer to bandgap instance - * @id: sensor id - * @thot: resulting current thot value - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot) -{ - return _ti_bandgap_read_threshold(bgp, id, thot, true); -} - -/** - * ti_bandgap_write_thot() - sets sensor current thot - * @bgp: pointer to bandgap instance - * @id: sensor id - * @val: desired thot value - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val) -{ - return _ti_bandgap_write_threshold(bgp, id, val, true); -} - -/** - * ti_bandgap_read_tcold() - reads sensor current tcold - * @bgp: pointer to bandgap instance - * @id: sensor id - * @tcold: resulting current tcold value - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold) -{ - return _ti_bandgap_read_threshold(bgp, id, tcold, false); -} - -/** - * ti_bandgap_write_tcold() - sets the sensor tcold - * @bgp: pointer to bandgap instance - * @id: sensor id - * @val: desired tcold value - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val) -{ - return _ti_bandgap_write_threshold(bgp, id, val, false); -} - -/** - * ti_bandgap_read_counter() - read the sensor counter - * @bgp: pointer to bandgap instance - * @id: sensor id - * @interval: resulting update interval in miliseconds - */ -static void ti_bandgap_read_counter(struct ti_bandgap *bgp, int id, - int *interval) -{ - struct temp_sensor_registers *tsr; - int time; - - tsr = bgp->conf->sensors[id].registers; - time = ti_bandgap_readl(bgp, tsr->bgap_counter); - time = (time & tsr->counter_mask) >> - __ffs(tsr->counter_mask); - time = time * 1000 / bgp->clk_rate; - *interval = time; -} - -/** - * ti_bandgap_read_counter_delay() - read the sensor counter delay - * @bgp: pointer to bandgap instance - * @id: sensor id - * @interval: resulting update interval in miliseconds - */ -static void ti_bandgap_read_counter_delay(struct ti_bandgap *bgp, int id, - int *interval) -{ - struct temp_sensor_registers *tsr; - int reg_val; - - tsr = bgp->conf->sensors[id].registers; - - reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); - reg_val = (reg_val & tsr->mask_counter_delay_mask) >> - __ffs(tsr->mask_counter_delay_mask); - switch (reg_val) { - case 0: - *interval = 0; - break; - case 1: - *interval = 1; - break; - case 2: - *interval = 10; - break; - case 3: - *interval = 100; - break; - case 4: - *interval = 250; - break; - case 5: - *interval = 500; - break; - default: - dev_warn(bgp->dev, "Wrong counter delay value read from register %X", - reg_val); - } -} - -/** - * ti_bandgap_read_update_interval() - read the sensor update interval - * @bgp: pointer to bandgap instance - * @id: sensor id - * @interval: resulting update interval in miliseconds - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id, - int *interval) -{ - int ret = 0; - - ret = ti_bandgap_validate(bgp, id); - if (ret) - goto exit; - - if (!TI_BANDGAP_HAS(bgp, COUNTER) && - !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) { - ret = -ENOTSUPP; - goto exit; - } - - if (TI_BANDGAP_HAS(bgp, COUNTER)) { - ti_bandgap_read_counter(bgp, id, interval); - goto exit; - } - - ti_bandgap_read_counter_delay(bgp, id, interval); -exit: - return ret; -} - -/** - * ti_bandgap_write_counter_delay() - set the counter_delay - * @bgp: pointer to bandgap instance - * @id: sensor id - * @interval: desired update interval in miliseconds - * - * Return: 0 on success or the proper error code - */ -static int ti_bandgap_write_counter_delay(struct ti_bandgap *bgp, int id, - u32 interval) -{ - int rval; - - switch (interval) { - case 0: /* Immediate conversion */ - rval = 0x0; - break; - case 1: /* Conversion after ever 1ms */ - rval = 0x1; - break; - case 10: /* Conversion after ever 10ms */ - rval = 0x2; - break; - case 100: /* Conversion after ever 100ms */ - rval = 0x3; - break; - case 250: /* Conversion after ever 250ms */ - rval = 0x4; - break; - case 500: /* Conversion after ever 500ms */ - rval = 0x5; - break; - default: - dev_warn(bgp->dev, "Delay %d ms is not supported\n", interval); - return -EINVAL; - } - - spin_lock(&bgp->lock); - RMW_BITS(bgp, id, bgap_mask_ctrl, mask_counter_delay_mask, rval); - spin_unlock(&bgp->lock); - - return 0; -} - -/** - * ti_bandgap_write_counter() - set the bandgap sensor counter - * @bgp: pointer to bandgap instance - * @id: sensor id - * @interval: desired update interval in miliseconds - */ -static void ti_bandgap_write_counter(struct ti_bandgap *bgp, int id, - u32 interval) -{ - interval = interval * bgp->clk_rate / 1000; - spin_lock(&bgp->lock); - RMW_BITS(bgp, id, bgap_counter, counter_mask, interval); - spin_unlock(&bgp->lock); -} - -/** - * ti_bandgap_write_update_interval() - set the update interval - * @bgp: pointer to bandgap instance - * @id: sensor id - * @interval: desired update interval in miliseconds - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, - int id, u32 interval) -{ - int ret = ti_bandgap_validate(bgp, id); - if (ret) - goto exit; - - if (!TI_BANDGAP_HAS(bgp, COUNTER) && - !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) { - ret = -ENOTSUPP; - goto exit; - } - - if (TI_BANDGAP_HAS(bgp, COUNTER)) { - ti_bandgap_write_counter(bgp, id, interval); - goto exit; - } - - ret = ti_bandgap_write_counter_delay(bgp, id, interval); -exit: - return ret; -} - -/** - * ti_bandgap_read_temperature() - report current temperature - * @bgp: pointer to bandgap instance - * @id: sensor id - * @temperature: resulting temperature - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, - int *temperature) -{ - u32 temp; - int ret; - - ret = ti_bandgap_validate(bgp, id); - if (ret) - return ret; - - spin_lock(&bgp->lock); - temp = ti_bandgap_read_temp(bgp, id); - spin_unlock(&bgp->lock); - - ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp); - if (ret) - return -EIO; - - *temperature = temp; - - return 0; -} - -/** - * ti_bandgap_set_sensor_data() - helper function to store thermal - * framework related data. - * @bgp: pointer to bandgap instance - * @id: sensor id - * @data: thermal framework related data to be stored - * - * Return: 0 on success or the proper error code - */ -int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data) -{ - int ret = ti_bandgap_validate(bgp, id); - if (ret) - return ret; - - bgp->regval[id].data = data; - - return 0; -} - -/** - * ti_bandgap_get_sensor_data() - helper function to get thermal - * framework related data. - * @bgp: pointer to bandgap instance - * @id: sensor id - * - * Return: data stored by set function with sensor id on success or NULL - */ -void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id) -{ - int ret = ti_bandgap_validate(bgp, id); - if (ret) - return ERR_PTR(ret); - - return bgp->regval[id].data; -} - -/*** Helper functions used during device initialization ***/ - -/** - * ti_bandgap_force_single_read() - executes 1 single ADC conversion - * @bgp: pointer to struct ti_bandgap - * @id: sensor id which it is desired to read 1 temperature - * - * Used to initialize the conversion state machine and set it to a valid - * state. Called during device initialization and context restore events. - * - * Return: 0 - */ -static int -ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) -{ - u32 temp = 0, counter = 1000; - - /* Select single conversion mode */ - if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) - RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0); - - /* Start of Conversion = 1 */ - RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1); - /* Wait until DTEMP is updated */ - temp = ti_bandgap_read_temp(bgp, id); - - while ((temp == 0) && --counter) - temp = ti_bandgap_read_temp(bgp, id); - /* REVISIT: Check correct condition for end of conversion */ - - /* Start of Conversion = 0 */ - RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0); - - return 0; -} - -/** - * ti_bandgap_set_continous_mode() - One time enabling of continuous mode - * @bgp: pointer to struct ti_bandgap - * - * Call this function only if HAS(MODE_CONFIG) is set. As this driver may - * be used for junction temperature monitoring, it is desirable that the - * sensors are operational all the time, so that alerts are generated - * properly. - * - * Return: 0 - */ -static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp) -{ - int i; - - for (i = 0; i < bgp->conf->sensor_count; i++) { - /* Perform a single read just before enabling continuous */ - ti_bandgap_force_single_read(bgp, i); - RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1); - } - - return 0; -} - -/** - * ti_bandgap_get_trend() - To fetch the temperature trend of a sensor - * @bgp: pointer to struct ti_bandgap - * @id: id of the individual sensor - * @trend: Pointer to trend. - * - * This function needs to be called to fetch the temperature trend of a - * Particular sensor. The function computes the difference in temperature - * w.r.t time. For the bandgaps with built in history buffer the temperatures - * are read from the buffer and for those without the Buffer -ENOTSUPP is - * returned. - * - * Return: 0 if no error, else return corresponding error. If no - * error then the trend value is passed on to trend parameter - */ -int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend) -{ - struct temp_sensor_registers *tsr; - u32 temp1, temp2, reg1, reg2; - int t1, t2, interval, ret = 0; - - ret = ti_bandgap_validate(bgp, id); - if (ret) - goto exit; - - if (!TI_BANDGAP_HAS(bgp, HISTORY_BUFFER) || - !TI_BANDGAP_HAS(bgp, FREEZE_BIT)) { - ret = -ENOTSUPP; - goto exit; - } - - tsr = bgp->conf->sensors[id].registers; - - /* Freeze and read the last 2 valid readings */ - reg1 = tsr->ctrl_dtemp_1; - reg2 = tsr->ctrl_dtemp_2; - - /* read temperature from history buffer */ - temp1 = ti_bandgap_readl(bgp, reg1); - temp1 &= tsr->bgap_dtemp_mask; - - temp2 = ti_bandgap_readl(bgp, reg2); - temp2 &= tsr->bgap_dtemp_mask; - - /* Convert from adc values to mCelsius temperature */ - ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1); - if (ret) - goto exit; - - ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2); - if (ret) - goto exit; - - /* Fetch the update interval */ - ret = ti_bandgap_read_update_interval(bgp, id, &interval); - if (ret || !interval) - goto exit; - - *trend = (t1 - t2) / interval; - - dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n", - t1, t2, *trend); - -exit: - return ret; -} - -/** - * ti_bandgap_tshut_init() - setup and initialize tshut handling - * @bgp: pointer to struct ti_bandgap - * @pdev: pointer to device struct platform_device - * - * Call this function only in case the bandgap features HAS(TSHUT). - * In this case, the driver needs to handle the TSHUT signal as an IRQ. - * The IRQ is wired as a GPIO, and for this purpose, it is required - * to specify which GPIO line is used. TSHUT IRQ is fired anytime - * one of the bandgap sensors violates the TSHUT high/hot threshold. - * And in that case, the system must go off. - * - * Return: 0 if no error, else error status - */ -static int ti_bandgap_tshut_init(struct ti_bandgap *bgp, - struct platform_device *pdev) -{ - int gpio_nr = bgp->tshut_gpio; - int status; - - /* Request for gpio_86 line */ - status = gpio_request(gpio_nr, "tshut"); - if (status < 0) { - dev_err(bgp->dev, "Could not request for TSHUT GPIO:%i\n", 86); - return status; - } - status = gpio_direction_input(gpio_nr); - if (status) { - dev_err(bgp->dev, "Cannot set input TSHUT GPIO %d\n", gpio_nr); - return status; - } - - status = request_irq(gpio_to_irq(gpio_nr), ti_bandgap_tshut_irq_handler, - IRQF_TRIGGER_RISING, "tshut", NULL); - if (status) { - gpio_free(gpio_nr); - dev_err(bgp->dev, "request irq failed for TSHUT"); - } - - return 0; -} - -/** - * ti_bandgap_alert_init() - setup and initialize talert handling - * @bgp: pointer to struct ti_bandgap - * @pdev: pointer to device struct platform_device - * - * Call this function only in case the bandgap features HAS(TALERT). - * In this case, the driver needs to handle the TALERT signals as an IRQs. - * TALERT is a normal IRQ and it is fired any time thresholds (hot or cold) - * are violated. In these situation, the driver must reprogram the thresholds, - * accordingly to specified policy. - * - * Return: 0 if no error, else return corresponding error. - */ -static int ti_bandgap_talert_init(struct ti_bandgap *bgp, - struct platform_device *pdev) -{ - int ret; - - bgp->irq = platform_get_irq(pdev, 0); - if (bgp->irq < 0) { - dev_err(&pdev->dev, "get_irq failed\n"); - return bgp->irq; - } - ret = request_threaded_irq(bgp->irq, NULL, - ti_bandgap_talert_irq_handler, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, - "talert", bgp); - if (ret) { - dev_err(&pdev->dev, "Request threaded irq failed.\n"); - return ret; - } - - return 0; -} - -static const struct of_device_id of_ti_bandgap_match[]; -/** - * ti_bandgap_build() - parse DT and setup a struct ti_bandgap - * @pdev: pointer to device struct platform_device - * - * Used to read the device tree properties accordingly to the bandgap - * matching version. Based on bandgap version and its capabilities it - * will build a struct ti_bandgap out of the required DT entries. - * - * Return: valid bandgap structure if successful, else returns ERR_PTR - * return value must be verified with IS_ERR. - */ -static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev) -{ - struct device_node *node = pdev->dev.of_node; - const struct of_device_id *of_id; - struct ti_bandgap *bgp; - struct resource *res; - u32 prop; - int i; - - /* just for the sake */ - if (!node) { - dev_err(&pdev->dev, "no platform information available\n"); - return ERR_PTR(-EINVAL); - } - - bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL); - if (!bgp) { - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n"); - return ERR_PTR(-ENOMEM); - } - - of_id = of_match_device(of_ti_bandgap_match, &pdev->dev); - if (of_id) - bgp->conf = of_id->data; - - /* register shadow for context save and restore */ - bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) * - bgp->conf->sensor_count, GFP_KERNEL); - if (!bgp) { - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n"); - return ERR_PTR(-ENOMEM); - } - - i = 0; - do { - void __iomem *chunk; - - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (!res) - break; - chunk = devm_ioremap_resource(&pdev->dev, res); - if (i == 0) - bgp->base = chunk; - if (IS_ERR(chunk)) - return ERR_CAST(chunk); - - i++; - } while (res); - - if (TI_BANDGAP_HAS(bgp, TSHUT)) { - if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) { - dev_err(&pdev->dev, "missing tshut gpio in device tree\n"); - return ERR_PTR(-EINVAL); - } - bgp->tshut_gpio = prop; - if (!gpio_is_valid(bgp->tshut_gpio)) { - dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n", - bgp->tshut_gpio); - return ERR_PTR(-EINVAL); - } - } - - return bgp; -} - -/*** Device driver call backs ***/ - -static -int ti_bandgap_probe(struct platform_device *pdev) -{ - struct ti_bandgap *bgp; - int clk_rate, ret = 0, i; - - bgp = ti_bandgap_build(pdev); - if (IS_ERR_OR_NULL(bgp)) { - dev_err(&pdev->dev, "failed to fetch platform data\n"); - return PTR_ERR(bgp); - } - bgp->dev = &pdev->dev; - - if (TI_BANDGAP_HAS(bgp, TSHUT)) { - ret = ti_bandgap_tshut_init(bgp, pdev); - if (ret) { - dev_err(&pdev->dev, - "failed to initialize system tshut IRQ\n"); - return ret; - } - } - - bgp->fclock = clk_get(NULL, bgp->conf->fclock_name); - ret = IS_ERR_OR_NULL(bgp->fclock); - if (ret) { - dev_err(&pdev->dev, "failed to request fclock reference\n"); - goto free_irqs; - } - - bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name); - ret = IS_ERR_OR_NULL(bgp->div_clk); - if (ret) { - dev_err(&pdev->dev, - "failed to request div_ts_ck clock ref\n"); - goto free_irqs; - } - - for (i = 0; i < bgp->conf->sensor_count; i++) { - struct temp_sensor_registers *tsr; - u32 val; - - tsr = bgp->conf->sensors[i].registers; - /* - * check if the efuse has a non-zero value if not - * it is an untrimmed sample and the temperatures - * may not be accurate - */ - val = ti_bandgap_readl(bgp, tsr->bgap_efuse); - if (ret || !val) - dev_info(&pdev->dev, - "Non-trimmed BGAP, Temp not accurate\n"); - } - - clk_rate = clk_round_rate(bgp->div_clk, - bgp->conf->sensors[0].ts_data->max_freq); - if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq || - clk_rate == 0xffffffff) { - ret = -ENODEV; - dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate); - goto put_clks; - } - - ret = clk_set_rate(bgp->div_clk, clk_rate); - if (ret) - dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n"); - - bgp->clk_rate = clk_rate; - if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) - clk_prepare_enable(bgp->fclock); - - - spin_lock_init(&bgp->lock); - bgp->dev = &pdev->dev; - platform_set_drvdata(pdev, bgp); - - ti_bandgap_power(bgp, true); - - /* Set default counter to 1 for now */ - if (TI_BANDGAP_HAS(bgp, COUNTER)) - for (i = 0; i < bgp->conf->sensor_count; i++) - RMW_BITS(bgp, i, bgap_counter, counter_mask, 1); - - /* Set default thresholds for alert and shutdown */ - for (i = 0; i < bgp->conf->sensor_count; i++) { - struct temp_sensor_data *ts_data; - - ts_data = bgp->conf->sensors[i].ts_data; - - if (TI_BANDGAP_HAS(bgp, TALERT)) { - /* Set initial Talert thresholds */ - RMW_BITS(bgp, i, bgap_threshold, - threshold_tcold_mask, ts_data->t_cold); - RMW_BITS(bgp, i, bgap_threshold, - threshold_thot_mask, ts_data->t_hot); - /* Enable the alert events */ - RMW_BITS(bgp, i, bgap_mask_ctrl, mask_hot_mask, 1); - RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1); - } - - if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) { - /* Set initial Tshut thresholds */ - RMW_BITS(bgp, i, tshut_threshold, - tshut_hot_mask, ts_data->tshut_hot); - RMW_BITS(bgp, i, tshut_threshold, - tshut_cold_mask, ts_data->tshut_cold); - } - } - - if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) - ti_bandgap_set_continuous_mode(bgp); - - /* Set .250 seconds time as default counter */ - if (TI_BANDGAP_HAS(bgp, COUNTER)) - for (i = 0; i < bgp->conf->sensor_count; i++) - RMW_BITS(bgp, i, bgap_counter, counter_mask, - bgp->clk_rate / 4); - - /* Every thing is good? Then expose the sensors */ - for (i = 0; i < bgp->conf->sensor_count; i++) { - char *domain; - - if (bgp->conf->sensors[i].register_cooling) { - ret = bgp->conf->sensors[i].register_cooling(bgp, i); - if (ret) - goto remove_sensors; - } - - if (bgp->conf->expose_sensor) { - domain = bgp->conf->sensors[i].domain; - ret = bgp->conf->expose_sensor(bgp, i, domain); - if (ret) - goto remove_last_cooling; - } - } - - /* - * Enable the Interrupts once everything is set. Otherwise irq handler - * might be called as soon as it is enabled where as rest of framework - * is still getting initialised. - */ - if (TI_BANDGAP_HAS(bgp, TALERT)) { - ret = ti_bandgap_talert_init(bgp, pdev); - if (ret) { - dev_err(&pdev->dev, "failed to initialize Talert IRQ\n"); - i = bgp->conf->sensor_count; - goto disable_clk; - } - } - - return 0; - -remove_last_cooling: - if (bgp->conf->sensors[i].unregister_cooling) - bgp->conf->sensors[i].unregister_cooling(bgp, i); -remove_sensors: - for (i--; i >= 0; i--) { - if (bgp->conf->sensors[i].unregister_cooling) - bgp->conf->sensors[i].unregister_cooling(bgp, i); - if (bgp->conf->remove_sensor) - bgp->conf->remove_sensor(bgp, i); - } - ti_bandgap_power(bgp, false); -disable_clk: - if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) - clk_disable_unprepare(bgp->fclock); -put_clks: - clk_put(bgp->fclock); - clk_put(bgp->div_clk); -free_irqs: - if (TI_BANDGAP_HAS(bgp, TSHUT)) { - free_irq(gpio_to_irq(bgp->tshut_gpio), NULL); - gpio_free(bgp->tshut_gpio); - } - - return ret; -} - -static -int ti_bandgap_remove(struct platform_device *pdev) -{ - struct ti_bandgap *bgp = platform_get_drvdata(pdev); - int i; - - /* First thing is to remove sensor interfaces */ - for (i = 0; i < bgp->conf->sensor_count; i++) { - if (bgp->conf->sensors[i].unregister_cooling) - bgp->conf->sensors[i].unregister_cooling(bgp, i); - - if (bgp->conf->remove_sensor) - bgp->conf->remove_sensor(bgp, i); - } - - ti_bandgap_power(bgp, false); - - if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) - clk_disable_unprepare(bgp->fclock); - clk_put(bgp->fclock); - clk_put(bgp->div_clk); - - if (TI_BANDGAP_HAS(bgp, TALERT)) - free_irq(bgp->irq, bgp); - - if (TI_BANDGAP_HAS(bgp, TSHUT)) { - free_irq(gpio_to_irq(bgp->tshut_gpio), NULL); - gpio_free(bgp->tshut_gpio); - } - - return 0; -} - -#ifdef CONFIG_PM -static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp) -{ - int i; - - for (i = 0; i < bgp->conf->sensor_count; i++) { - struct temp_sensor_registers *tsr; - struct temp_sensor_regval *rval; - - rval = &bgp->regval[i]; - tsr = bgp->conf->sensors[i].registers; - - if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) - rval->bg_mode_ctrl = ti_bandgap_readl(bgp, - tsr->bgap_mode_ctrl); - if (TI_BANDGAP_HAS(bgp, COUNTER)) - rval->bg_counter = ti_bandgap_readl(bgp, - tsr->bgap_counter); - if (TI_BANDGAP_HAS(bgp, TALERT)) { - rval->bg_threshold = ti_bandgap_readl(bgp, - tsr->bgap_threshold); - rval->bg_ctrl = ti_bandgap_readl(bgp, - tsr->bgap_mask_ctrl); - } - - if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) - rval->tshut_threshold = ti_bandgap_readl(bgp, - tsr->tshut_threshold); - } - - return 0; -} - -static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp) -{ - int i; - - for (i = 0; i < bgp->conf->sensor_count; i++) { - struct temp_sensor_registers *tsr; - struct temp_sensor_regval *rval; - u32 val = 0; - - rval = &bgp->regval[i]; - tsr = bgp->conf->sensors[i].registers; - - if (TI_BANDGAP_HAS(bgp, COUNTER)) - val = ti_bandgap_readl(bgp, tsr->bgap_counter); - - if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) - ti_bandgap_writel(bgp, rval->tshut_threshold, - tsr->tshut_threshold); - /* Force immediate temperature measurement and update - * of the DTEMP field - */ - ti_bandgap_force_single_read(bgp, i); - - if (TI_BANDGAP_HAS(bgp, COUNTER)) - ti_bandgap_writel(bgp, rval->bg_counter, - tsr->bgap_counter); - if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) - ti_bandgap_writel(bgp, rval->bg_mode_ctrl, - tsr->bgap_mode_ctrl); - if (TI_BANDGAP_HAS(bgp, TALERT)) { - ti_bandgap_writel(bgp, rval->bg_threshold, - tsr->bgap_threshold); - ti_bandgap_writel(bgp, rval->bg_ctrl, - tsr->bgap_mask_ctrl); - } - } - - return 0; -} - -static int ti_bandgap_suspend(struct device *dev) -{ - struct ti_bandgap *bgp = dev_get_drvdata(dev); - int err; - - err = ti_bandgap_save_ctxt(bgp); - ti_bandgap_power(bgp, false); - - if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) - clk_disable_unprepare(bgp->fclock); - - return err; -} - -static int ti_bandgap_resume(struct device *dev) -{ - struct ti_bandgap *bgp = dev_get_drvdata(dev); - - if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) - clk_prepare_enable(bgp->fclock); - - ti_bandgap_power(bgp, true); - - return ti_bandgap_restore_ctxt(bgp); -} -static const struct dev_pm_ops ti_bandgap_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(ti_bandgap_suspend, - ti_bandgap_resume) -}; - -#define DEV_PM_OPS (&ti_bandgap_dev_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - -static const struct of_device_id of_ti_bandgap_match[] = { -#ifdef CONFIG_OMAP4_THERMAL - { - .compatible = "ti,omap4430-bandgap", - .data = (void *)&omap4430_data, - }, - { - .compatible = "ti,omap4460-bandgap", - .data = (void *)&omap4460_data, - }, - { - .compatible = "ti,omap4470-bandgap", - .data = (void *)&omap4470_data, - }, -#endif -#ifdef CONFIG_OMAP5_THERMAL - { - .compatible = "ti,omap5430-bandgap", - .data = (void *)&omap5430_data, - }, -#endif - /* Sentinel */ - { }, -}; -MODULE_DEVICE_TABLE(of, of_ti_bandgap_match); - -static struct platform_driver ti_bandgap_sensor_driver = { - .probe = ti_bandgap_probe, - .remove = ti_bandgap_remove, - .driver = { - .name = "ti-soc-thermal", - .pm = DEV_PM_OPS, - .of_match_table = of_ti_bandgap_match, - }, -}; - -module_platform_driver(ti_bandgap_sensor_driver); - -MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:ti-soc-thermal"); -MODULE_AUTHOR("Texas Instrument Inc."); diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h deleted file mode 100644 index 5f4794a..0000000 --- a/drivers/staging/ti-soc-thermal/ti-bandgap.h +++ /dev/null @@ -1,403 +0,0 @@ -/* - * OMAP4 Bandgap temperature sensor driver - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * Contact: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ -#ifndef __TI_BANDGAP_H -#define __TI_BANDGAP_H - -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/err.h> - -/** - * DOC: bandgap driver data structure - * ================================== - * - * +----------+----------------+ - * | struct temp_sensor_regval | - * +---------------------------+ - * * (Array of) - * | - * | - * +-------------------+ +-----------------+ - * | struct ti_bandgap |-->| struct device * | - * +----------+--------+ +-----------------+ - * | - * | - * V - * +------------------------+ - * | struct ti_bandgap_data | - * +------------------------+ - * | - * | - * * (Array of) - * +------------+------------------------------------------------------+ - * | +----------+------------+ +-------------------------+ | - * | | struct ti_temp_sensor |-->| struct temp_sensor_data | | - * | +-----------------------+ +------------+------------+ | - * | | | - * | + | - * | V | - * | +----------+-------------------+ | - * | | struct temp_sensor_registers | | - * | +------------------------------+ | - * | | - * +-------------------------------------------------------------------+ - * - * Above is a simple diagram describing how the data structure below - * are organized. For each bandgap device there should be a ti_bandgap_data - * containing the device instance configuration, as well as, an array of - * sensors, representing every sensor instance present in this bandgap. - */ - -/** - * struct temp_sensor_registers - descriptor to access registers and bitfields - * @temp_sensor_ctrl: TEMP_SENSOR_CTRL register offset - * @bgap_tempsoff_mask: mask to temp_sensor_ctrl.tempsoff - * @bgap_soc_mask: mask to temp_sensor_ctrl.soc - * @bgap_eocz_mask: mask to temp_sensor_ctrl.eocz - * @bgap_dtemp_mask: mask to temp_sensor_ctrl.dtemp - * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset - * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot - * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold - * @mask_sidlemode_mask: mask to bandgap_mask_ctrl.mask_sidlemode - * @mask_counter_delay_mask: mask to bandgap_mask_ctrl.mask_counter_delay - * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free - * @mask_clear_mask: mask to bandgap_mask_ctrl.mask_clear - * @mask_clear_accum_mask: mask to bandgap_mask_ctrl.mask_clear_accum - * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset - * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl - * @bgap_counter: BANDGAP_COUNTER register offset - * @counter_mask: mask to bandgap_counter.counter - * @bgap_threshold: BANDGAP_THRESHOLD register offset (TALERT thresholds) - * @threshold_thot_mask: mask to bandgap_threhold.thot - * @threshold_tcold_mask: mask to bandgap_threhold.tcold - * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds) - * @tshut_efuse_mask: mask to tshut_threshold.tshut_efuse - * @tshut_efuse_shift: shift to tshut_threshold.tshut_efuse - * @tshut_hot_mask: mask to tshut_threhold.thot - * @tshut_cold_mask: mask to tshut_threhold.thot - * @bgap_status: BANDGAP_STATUS register offset - * @status_clean_stop_mask: mask to bandgap_status.clean_stop - * @status_bgap_alert_mask: mask to bandgap_status.bandgap_alert - * @status_hot_mask: mask to bandgap_status.hot - * @status_cold_mask: mask to bandgap_status.cold - * @bgap_cumul_dtemp: BANDGAP_CUMUL_DTEMP register offset - * @ctrl_dtemp_0: CTRL_DTEMP0 register offset - * @ctrl_dtemp_1: CTRL_DTEMP1 register offset - * @ctrl_dtemp_2: CTRL_DTEMP2 register offset - * @ctrl_dtemp_3: CTRL_DTEMP3 register offset - * @ctrl_dtemp_4: CTRL_DTEMP4 register offset - * @bgap_efuse: BANDGAP_EFUSE register offset - * - * The register offsets and bitfields might change across - * OMAP and variants versions. Hence this struct serves as a - * descriptor map on how to access the registers and the bitfields. - * - * This descriptor contains registers of all versions of bandgap chips. - * Not all versions will use all registers, depending on the available - * features. Please read TRMs for descriptive explanation on each bitfield. - */ - -struct temp_sensor_registers { - u32 temp_sensor_ctrl; - u32 bgap_tempsoff_mask; - u32 bgap_soc_mask; - u32 bgap_eocz_mask; /* not used: but needs revisit */ - u32 bgap_dtemp_mask; - - u32 bgap_mask_ctrl; - u32 mask_hot_mask; - u32 mask_cold_mask; - u32 mask_sidlemode_mask; /* not used: but may be needed for pm */ - u32 mask_counter_delay_mask; - u32 mask_freeze_mask; - u32 mask_clear_mask; /* not used: but needed for trending */ - u32 mask_clear_accum_mask; /* not used: but needed for trending */ - - u32 bgap_mode_ctrl; - u32 mode_ctrl_mask; - - u32 bgap_counter; - u32 counter_mask; - - u32 bgap_threshold; - u32 threshold_thot_mask; - u32 threshold_tcold_mask; - - u32 tshut_threshold; - u32 tshut_efuse_mask; /* not used */ - u32 tshut_efuse_shift; /* not used */ - u32 tshut_hot_mask; - u32 tshut_cold_mask; - - u32 bgap_status; - u32 status_clean_stop_mask; /* not used: but needed for trending */ - u32 status_bgap_alert_mask; /* not used */ - u32 status_hot_mask; - u32 status_cold_mask; - - u32 bgap_cumul_dtemp; /* not used: but needed for trending */ - u32 ctrl_dtemp_0; /* not used: but needed for trending */ - u32 ctrl_dtemp_1; /* not used: but needed for trending */ - u32 ctrl_dtemp_2; /* not used: but needed for trending */ - u32 ctrl_dtemp_3; /* not used: but needed for trending */ - u32 ctrl_dtemp_4; /* not used: but needed for trending */ - u32 bgap_efuse; -}; - -/** - * struct temp_sensor_data - The thresholds and limits for temperature sensors. - * @tshut_hot: temperature to trigger a thermal reset (initial value) - * @tshut_cold: temp to get the plat out of reset due to thermal (init val) - * @t_hot: temperature to trigger a thermal alert (high initial value) - * @t_cold: temperature to trigger a thermal alert (low initial value) - * @min_freq: sensor minimum clock rate - * @max_freq: sensor maximum clock rate - * @max_temp: sensor maximum temperature - * @min_temp: sensor minimum temperature - * @hyst_val: temperature hysteresis considered while converting ADC values - * @update_int1: update interval - * @update_int2: update interval - * - * This data structure will hold the required thresholds and temperature limits - * for a specific temperature sensor, like shutdown temperature, alert - * temperature, clock / rate used, ADC conversion limits and update intervals - */ -struct temp_sensor_data { - u32 tshut_hot; - u32 tshut_cold; - u32 t_hot; - u32 t_cold; - u32 min_freq; - u32 max_freq; - int max_temp; - int min_temp; - int hyst_val; - u32 update_int1; /* not used */ - u32 update_int2; /* not used */ -}; - -struct ti_bandgap_data; - -/** - * struct temp_sensor_regval - temperature sensor register values and priv data - * @bg_mode_ctrl: temp sensor control register value - * @bg_ctrl: bandgap ctrl register value - * @bg_counter: bandgap counter value - * @bg_threshold: bandgap threshold register value - * @tshut_threshold: bandgap tshut register value - * @data: private data - * - * Data structure to save and restore bandgap register set context. Only - * required registers are shadowed, when needed. - */ -struct temp_sensor_regval { - u32 bg_mode_ctrl; - u32 bg_ctrl; - u32 bg_counter; - u32 bg_threshold; - u32 tshut_threshold; - void *data; -}; - -/** - * struct ti_bandgap - bandgap device structure - * @dev: struct device pointer - * @base: io memory base address - * @conf: struct with bandgap configuration set (# sensors, conv_table, etc) - * @regval: temperature sensor register values - * @fclock: pointer to functional clock of temperature sensor - * @div_clk: pointer to divider clock of temperature sensor fclk - * @lock: spinlock for ti_bandgap structure - * @irq: MPU IRQ number for thermal alert - * @tshut_gpio: GPIO where Tshut signal is routed - * @clk_rate: Holds current clock rate - * - * The bandgap device structure representing the bandgap device instance. - * It holds most of the dynamic stuff. Configurations and sensor specific - * entries are inside the @conf structure. - */ -struct ti_bandgap { - struct device *dev; - void __iomem *base; - const struct ti_bandgap_data *conf; - struct temp_sensor_regval *regval; - struct clk *fclock; - struct clk *div_clk; - spinlock_t lock; /* shields this struct */ - int irq; - int tshut_gpio; - u32 clk_rate; -}; - -/** - * struct ti_temp_sensor - bandgap temperature sensor configuration data - * @ts_data: pointer to struct with thresholds, limits of temperature sensor - * @registers: pointer to the list of register offsets and bitfields - * @domain: the name of the domain where the sensor is located - * @slope: sensor gradient slope info for hotspot extrapolation equation - * @constant: sensor gradient const info for hotspot extrapolation equation - * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation - * with no external influence - * @constant_pcb: sensor gradient const info for hotspot extrapolation equation - * with no external influence - * @register_cooling: function to describe how this sensor is going to be cooled - * @unregister_cooling: function to release cooling data - * - * Data structure to describe a temperature sensor handled by a bandgap device. - * It should provide configuration details on this sensor, such as how to - * access the registers affecting this sensor, shadow register buffer, how to - * assess the gradient from hotspot, how to cooldown the domain when sensor - * reports too hot temperature. - */ -struct ti_temp_sensor { - struct temp_sensor_data *ts_data; - struct temp_sensor_registers *registers; - char *domain; - /* for hotspot extrapolation */ - const int slope; - const int constant; - const int slope_pcb; - const int constant_pcb; - int (*register_cooling)(struct ti_bandgap *bgp, int id); - int (*unregister_cooling)(struct ti_bandgap *bgp, int id); -}; - -/** - * DOC: ti bandgap feature types - * - * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output - * of a bandgap device instance is routed to the processor. This means - * the system must react and perform the shutdown by itself (handle an - * IRQ, for instance). - * - * TI_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control - * over the thermal shutdown configuration. This means that the thermal - * shutdown thresholds are programmable, for instance. - * - * TI_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs - * a signal representing violation of programmable alert thresholds. - * - * TI_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which - * mode, continuous or one shot, the bandgap device instance will operate. - * - * TI_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows - * programming the update interval of its internal state machine. - * - * TI_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows - * itself to be switched on/off. - * - * TI_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap - * device are gateable or not. - * - * TI_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features - * a history buffer that its update can be freezed/unfreezed. - * - * TI_BANDGAP_FEATURE_COUNTER_DELAY - used when the bandgap device features - * a delay programming based on distinct values. - * - * TI_BANDGAP_FEATURE_HISTORY_BUFFER - used when the bandgap device features - * a history buffer of temperatures. - * - * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a - * specific feature (above) or not. Return non-zero, if yes. - */ -#define TI_BANDGAP_FEATURE_TSHUT BIT(0) -#define TI_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1) -#define TI_BANDGAP_FEATURE_TALERT BIT(2) -#define TI_BANDGAP_FEATURE_MODE_CONFIG BIT(3) -#define TI_BANDGAP_FEATURE_COUNTER BIT(4) -#define TI_BANDGAP_FEATURE_POWER_SWITCH BIT(5) -#define TI_BANDGAP_FEATURE_CLK_CTRL BIT(6) -#define TI_BANDGAP_FEATURE_FREEZE_BIT BIT(7) -#define TI_BANDGAP_FEATURE_COUNTER_DELAY BIT(8) -#define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) -#define TI_BANDGAP_HAS(b, f) \ - ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) - -/** - * struct ti_bandgap_data - ti bandgap data configuration structure - * @features: a bitwise flag set to describe the device features - * @conv_table: Pointer to ADC to temperature conversion table - * @adc_start_val: ADC conversion table starting value - * @adc_end_val: ADC conversion table ending value - * @fclock_name: clock name of the functional clock - * @div_ck_name: clock name of the clock divisor - * @sensor_count: count of temperature sensor within this bandgap device - * @report_temperature: callback to report thermal alert to thermal API - * @expose_sensor: callback to export sensor to thermal API - * @remove_sensor: callback to destroy sensor from thermal API - * @sensors: array of sensors present in this bandgap instance - * - * This is a data structure which should hold most of the static configuration - * of a bandgap device instance. It should describe which features this instance - * is capable of, the clock names to feed this device, the amount of sensors and - * their configuration representation, and how to export and unexport them to - * a thermal API. - */ -struct ti_bandgap_data { - unsigned int features; - const int *conv_table; - u32 adc_start_val; - u32 adc_end_val; - char *fclock_name; - char *div_ck_name; - int sensor_count; - int (*report_temperature)(struct ti_bandgap *bgp, int id); - int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain); - int (*remove_sensor)(struct ti_bandgap *bgp, int id); - - /* this needs to be at the end */ - struct ti_temp_sensor sensors[]; -}; - -int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot); -int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val); -int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold); -int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val); -int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id, - int *interval); -int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id, - u32 interval); -int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, - int *temperature); -int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data); -void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id); -int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend); - -#ifdef CONFIG_OMAP4_THERMAL -extern const struct ti_bandgap_data omap4430_data; -extern const struct ti_bandgap_data omap4460_data; -extern const struct ti_bandgap_data omap4470_data; -#else -#define omap4430_data NULL -#define omap4460_data NULL -#define omap4470_data NULL -#endif - -#ifdef CONFIG_OMAP5_THERMAL -extern const struct ti_bandgap_data omap5430_data; -#else -#define omap5430_data NULL -#endif - -#endif diff --git a/drivers/staging/ti-soc-thermal/ti-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c deleted file mode 100644 index 8e67ebf..0000000 --- a/drivers/staging/ti-soc-thermal/ti-thermal-common.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * OMAP thermal driver interface - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * Contact: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/device.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/workqueue.h> -#include <linux/thermal.h> -#include <linux/cpufreq.h> -#include <linux/cpumask.h> -#include <linux/cpu_cooling.h> - -#include "ti-thermal.h" -#include "ti-bandgap.h" - -/* common data structures */ -struct ti_thermal_data { - struct thermal_zone_device *ti_thermal; - struct thermal_zone_device *pcb_tz; - struct thermal_cooling_device *cool_dev; - struct ti_bandgap *bgp; - enum thermal_device_mode mode; - struct work_struct thermal_wq; - int sensor_id; -}; - -static void ti_thermal_work(struct work_struct *work) -{ - struct ti_thermal_data *data = container_of(work, - struct ti_thermal_data, thermal_wq); - - thermal_zone_device_update(data->ti_thermal); - - dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n", - data->ti_thermal->type); -} - -/** - * ti_thermal_hotspot_temperature - returns sensor extrapolated temperature - * @t: omap sensor temperature - * @s: omap sensor slope value - * @c: omap sensor const value - */ -static inline int ti_thermal_hotspot_temperature(int t, int s, int c) -{ - int delta = t * s / 1000 + c; - - if (delta < 0) - delta = 0; - - return t + delta; -} - -/* thermal zone ops */ -/* Get temperature callback function for thermal zone*/ -static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, - unsigned long *temp) -{ - struct thermal_zone_device *pcb_tz = NULL; - struct ti_thermal_data *data = thermal->devdata; - struct ti_bandgap *bgp; - const struct ti_temp_sensor *s; - int ret, tmp, slope, constant; - unsigned long pcb_temp; - - if (!data) - return 0; - - bgp = data->bgp; - s = &bgp->conf->sensors[data->sensor_id]; - - ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp); - if (ret) - return ret; - - /* Default constants */ - slope = s->slope; - constant = s->constant; - - pcb_tz = data->pcb_tz; - /* In case pcb zone is available, use the extrapolation rule with it */ - if (!IS_ERR_OR_NULL(pcb_tz)) { - ret = thermal_zone_get_temp(pcb_tz, &pcb_temp); - if (!ret) { - tmp -= pcb_temp; /* got a valid PCB temp */ - slope = s->slope_pcb; - constant = s->constant_pcb; - } else { - dev_err(bgp->dev, - "Failed to read PCB state. Using defaults\n"); - } - } - *temp = ti_thermal_hotspot_temperature(tmp, slope, constant); - - return ret; -} - -/* Bind callback functions for thermal zone */ -static int ti_thermal_bind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - struct ti_thermal_data *data = thermal->devdata; - int id; - - if (IS_ERR_OR_NULL(data)) - return -ENODEV; - - /* check if this is the cooling device we registered */ - if (data->cool_dev != cdev) - return 0; - - id = data->sensor_id; - - /* Simple thing, two trips, one passive another critical */ - return thermal_zone_bind_cooling_device(thermal, 0, cdev, - /* bind with min and max states defined by cpu_cooling */ - THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); -} - -/* Unbind callback functions for thermal zone */ -static int ti_thermal_unbind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - struct ti_thermal_data *data = thermal->devdata; - - if (IS_ERR_OR_NULL(data)) - return -ENODEV; - - /* check if this is the cooling device we registered */ - if (data->cool_dev != cdev) - return 0; - - /* Simple thing, two trips, one passive another critical */ - return thermal_zone_unbind_cooling_device(thermal, 0, cdev); -} - -/* Get mode callback functions for thermal zone */ -static int ti_thermal_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) -{ - struct ti_thermal_data *data = thermal->devdata; - - if (data) - *mode = data->mode; - - return 0; -} - -/* Set mode callback functions for thermal zone */ -static int ti_thermal_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) -{ - struct ti_thermal_data *data = thermal->devdata; - - if (!data->ti_thermal) { - dev_notice(&thermal->device, "thermal zone not registered\n"); - return 0; - } - - mutex_lock(&data->ti_thermal->lock); - - if (mode == THERMAL_DEVICE_ENABLED) - data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; - else - data->ti_thermal->polling_delay = 0; - - mutex_unlock(&data->ti_thermal->lock); - - data->mode = mode; - thermal_zone_device_update(data->ti_thermal); - dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", - data->ti_thermal->polling_delay); - - return 0; -} - -/* Get trip type callback functions for thermal zone */ -static int ti_thermal_get_trip_type(struct thermal_zone_device *thermal, - int trip, enum thermal_trip_type *type) -{ - if (!ti_thermal_is_valid_trip(trip)) - return -EINVAL; - - if (trip + 1 == OMAP_TRIP_NUMBER) - *type = THERMAL_TRIP_CRITICAL; - else - *type = THERMAL_TRIP_PASSIVE; - - return 0; -} - -/* Get trip temperature callback functions for thermal zone */ -static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal, - int trip, unsigned long *temp) -{ - if (!ti_thermal_is_valid_trip(trip)) - return -EINVAL; - - *temp = ti_thermal_get_trip_value(trip); - - return 0; -} - -/* Get the temperature trend callback functions for thermal zone */ -static int ti_thermal_get_trend(struct thermal_zone_device *thermal, - int trip, enum thermal_trend *trend) -{ - struct ti_thermal_data *data = thermal->devdata; - struct ti_bandgap *bgp; - int id, tr, ret = 0; - - bgp = data->bgp; - id = data->sensor_id; - - ret = ti_bandgap_get_trend(bgp, id, &tr); - if (ret) - return ret; - - if (tr > 0) - *trend = THERMAL_TREND_RAISING; - else if (tr < 0) - *trend = THERMAL_TREND_DROPPING; - else - *trend = THERMAL_TREND_STABLE; - - return 0; -} - -/* Get critical temperature callback functions for thermal zone */ -static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal, - unsigned long *temp) -{ - /* shutdown zone */ - return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp); -} - -static struct thermal_zone_device_ops ti_thermal_ops = { - .get_temp = ti_thermal_get_temp, - .get_trend = ti_thermal_get_trend, - .bind = ti_thermal_bind, - .unbind = ti_thermal_unbind, - .get_mode = ti_thermal_get_mode, - .set_mode = ti_thermal_set_mode, - .get_trip_type = ti_thermal_get_trip_type, - .get_trip_temp = ti_thermal_get_trip_temp, - .get_crit_temp = ti_thermal_get_crit_temp, -}; - -static struct ti_thermal_data -*ti_thermal_build_data(struct ti_bandgap *bgp, int id) -{ - struct ti_thermal_data *data; - - data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL); - if (!data) { - dev_err(bgp->dev, "kzalloc fail\n"); - return NULL; - } - data->sensor_id = id; - data->bgp = bgp; - data->mode = THERMAL_DEVICE_ENABLED; - data->pcb_tz = thermal_zone_get_zone_by_name("pcb"); - INIT_WORK(&data->thermal_wq, ti_thermal_work); - - return data; -} - -int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, - char *domain) -{ - struct ti_thermal_data *data; - - data = ti_bandgap_get_sensor_data(bgp, id); - - if (IS_ERR_OR_NULL(data)) - data = ti_thermal_build_data(bgp, id); - - if (!data) - return -EINVAL; - - /* Create thermal zone */ - data->ti_thermal = thermal_zone_device_register(domain, - OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops, - NULL, FAST_TEMP_MONITORING_RATE, - FAST_TEMP_MONITORING_RATE); - if (IS_ERR_OR_NULL(data->ti_thermal)) { - dev_err(bgp->dev, "thermal zone device is NULL\n"); - return PTR_ERR(data->ti_thermal); - } - data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; - ti_bandgap_set_sensor_data(bgp, id, data); - - return 0; -} - -int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) -{ - struct ti_thermal_data *data; - - data = ti_bandgap_get_sensor_data(bgp, id); - - thermal_zone_device_unregister(data->ti_thermal); - - return 0; -} - -int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id) -{ - struct ti_thermal_data *data; - - data = ti_bandgap_get_sensor_data(bgp, id); - - schedule_work(&data->thermal_wq); - - return 0; -} - -int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) -{ - struct ti_thermal_data *data; - - data = ti_bandgap_get_sensor_data(bgp, id); - if (IS_ERR_OR_NULL(data)) - data = ti_thermal_build_data(bgp, id); - - if (!data) - return -EINVAL; - - if (!cpufreq_get_current_driver()) { - dev_dbg(bgp->dev, "no cpufreq driver yet\n"); - return -EPROBE_DEFER; - } - - /* Register cooling device */ - data->cool_dev = cpufreq_cooling_register(cpu_present_mask); - if (IS_ERR_OR_NULL(data->cool_dev)) { - dev_err(bgp->dev, - "Failed to register cpufreq cooling device\n"); - return PTR_ERR(data->cool_dev); - } - ti_bandgap_set_sensor_data(bgp, id, data); - - return 0; -} - -int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) -{ - struct ti_thermal_data *data; - - data = ti_bandgap_get_sensor_data(bgp, id); - cpufreq_cooling_unregister(data->cool_dev); - - return 0; -} diff --git a/drivers/staging/ti-soc-thermal/ti-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h deleted file mode 100644 index 5055777..0000000 --- a/drivers/staging/ti-soc-thermal/ti-thermal.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * OMAP thermal definitions - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * Contact: - * Eduardo Valentin <eduardo.valentin@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ -#ifndef __TI_THERMAL_H -#define __TI_THERMAL_H - -#include "ti-bandgap.h" - -/* sensors gradient and offsets */ -#define OMAP_GRADIENT_SLOPE_4430 0 -#define OMAP_GRADIENT_CONST_4430 20000 -#define OMAP_GRADIENT_SLOPE_4460 348 -#define OMAP_GRADIENT_CONST_4460 -9301 -#define OMAP_GRADIENT_SLOPE_4470 308 -#define OMAP_GRADIENT_CONST_4470 -7896 - -#define OMAP_GRADIENT_SLOPE_5430_CPU 65 -#define OMAP_GRADIENT_CONST_5430_CPU -1791 -#define OMAP_GRADIENT_SLOPE_5430_GPU 117 -#define OMAP_GRADIENT_CONST_5430_GPU -2992 - -/* PCB sensor calculation constants */ -#define OMAP_GRADIENT_SLOPE_W_PCB_4430 0 -#define OMAP_GRADIENT_CONST_W_PCB_4430 20000 -#define OMAP_GRADIENT_SLOPE_W_PCB_4460 1142 -#define OMAP_GRADIENT_CONST_W_PCB_4460 -393 -#define OMAP_GRADIENT_SLOPE_W_PCB_4470 1063 -#define OMAP_GRADIENT_CONST_W_PCB_4470 -477 - -#define OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU 100 -#define OMAP_GRADIENT_CONST_W_PCB_5430_CPU 484 -#define OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU 464 -#define OMAP_GRADIENT_CONST_W_PCB_5430_GPU -5102 - -/* trip points of interest in milicelsius (at hotspot level) */ -#define OMAP_TRIP_COLD 100000 -#define OMAP_TRIP_HOT 110000 -#define OMAP_TRIP_SHUTDOWN 125000 -#define OMAP_TRIP_NUMBER 2 -#define OMAP_TRIP_STEP \ - ((OMAP_TRIP_SHUTDOWN - OMAP_TRIP_HOT) / (OMAP_TRIP_NUMBER - 1)) - -/* Update rates */ -#define FAST_TEMP_MONITORING_RATE 250 - -/* helper macros */ -/** - * ti_thermal_get_trip_value - returns trip temperature based on index - * @i: trip index - */ -#define ti_thermal_get_trip_value(i) \ - (OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP)) - -/** - * ti_thermal_is_valid_trip - check for trip index - * @i: trip index - */ -#define ti_thermal_is_valid_trip(trip) \ - ((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER) - -#ifdef CONFIG_TI_THERMAL -int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain); -int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id); -int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id); -int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id); -int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id); -#else -static inline -int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain) -{ - return 0; -} - -static inline -int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) -{ - return 0; -} - -static inline -int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id) -{ - return 0; -} - -static inline -int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) -{ - return 0; -} - -static inline -int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) -{ - return 0; -} -#endif -#endif diff --git a/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt b/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt deleted file mode 100644 index 1629652..0000000 --- a/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Texas Instrument OMAP SCM bandgap bindings - -In the System Control Module, OMAP supplies a voltage reference -and a temperature sensor feature that are gathered in the band -gap voltage and temperature sensor (VBGAPTS) module. The band -gap provides current and voltage reference for its internal -circuits and other analog IP blocks. The analog-to-digital -converter (ADC) produces an output value that is proportional -to the silicon temperature. - -Required properties: -- compatible : Should be: - - "ti,omap4430-bandgap" : for OMAP4430 bandgap - - "ti,omap4460-bandgap" : for OMAP4460 bandgap - - "ti,omap4470-bandgap" : for OMAP4470 bandgap - - "ti,omap5430-bandgap" : for OMAP5430 bandgap -- interrupts : this entry should indicate which interrupt line -the talert signal is routed to; -Specific: -- ti,tshut-gpio : this entry should be used to inform which GPIO -line the tshut signal is routed to; -- regs : this entry must also be specified and it is specific -to each bandgap version, because the mapping may change from -soc to soc, apart of depending on available features. - -Example: -OMAP4430: -bandgap { - reg = <0x4a002260 0x4 0x4a00232C 0x4>; - compatible = "ti,omap4430-bandgap"; -}; - -OMAP4460: -bandgap { - reg = <0x4a002260 0x4 - 0x4a00232C 0x4 - 0x4a002378 0x18>; - compatible = "ti,omap4460-bandgap"; - interrupts = <0 126 4>; /* talert */ - ti,tshut-gpio = <86>; -}; - -OMAP4470: -bandgap { - reg = <0x4a002260 0x4 - 0x4a00232C 0x4 - 0x4a002378 0x18>; - compatible = "ti,omap4470-bandgap"; - interrupts = <0 126 4>; /* talert */ - ti,tshut-gpio = <86>; -}; - -OMAP5430: -bandgap { - reg = <0x4a0021e0 0xc - 0x4a00232c 0xc - 0x4a002380 0x2c - 0x4a0023C0 0x3c>; - compatible = "ti,omap5430-bandgap"; - interrupts = <0 126 4>; /* talert */ -}; |