diff options
author | Greg Kroah-Hartman <gregkh@suse.de> | 2011-02-22 16:57:21 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-02-22 16:57:21 -0800 |
commit | 4a6514e6d096716fb7bedf238efaaca877e2a7e8 (patch) | |
tree | e3601ee168cca90307ac91e750a86d6ed04eab01 /drivers/staging/tty/specialix.c | |
parent | 282361a046edd9d58a134f358a3f65a7cb8655d9 (diff) | |
download | op-kernel-dev-4a6514e6d096716fb7bedf238efaaca877e2a7e8.zip op-kernel-dev-4a6514e6d096716fb7bedf238efaaca877e2a7e8.tar.gz |
tty: move obsolete and broken tty drivers to drivers/staging/tty/
As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/tty/ directory where they will be removed after 2.6.41
if no one steps up to claim them.
epca
epca
ip2
istallion
riscom8
serial167
specialix
stallion
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/tty/specialix.c')
-rw-r--r-- | drivers/staging/tty/specialix.c | 2368 |
1 files changed, 2368 insertions, 0 deletions
diff --git a/drivers/staging/tty/specialix.c b/drivers/staging/tty/specialix.c new file mode 100644 index 0000000..47e5753 --- /dev/null +++ b/drivers/staging/tty/specialix.c @@ -0,0 +1,2368 @@ +/* + * specialix.c -- specialix IO8+ multiport serial driver. + * + * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) + * + * Specialix pays for the development and support of this driver. + * Please DO contact io8-linux@specialix.co.uk if you require + * support. But please read the documentation (specialix.txt) + * first. + * + * This driver was developped in the BitWizard linux device + * driver service. If you require a linux device driver for your + * product, please contact devices@BitWizard.nl for a quote. + * + * This code is firmly based on the riscom/8 serial driver, + * written by Dmitry Gorodchanin. The specialix IO8+ card + * programming information was obtained from the CL-CD1865 Data + * Book, and Specialix document number 6200059: IO8+ Hardware + * Functional Specification. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * Revision history: + * + * Revision 1.0: April 1st 1997. + * Initial release for alpha testing. + * Revision 1.1: April 14th 1997. + * Incorporated Richard Hudsons suggestions, + * removed some debugging printk's. + * Revision 1.2: April 15th 1997. + * Ported to 2.1.x kernels. + * Revision 1.3: April 17th 1997 + * Backported to 2.0. (Compatibility macros). + * Revision 1.4: April 18th 1997 + * Fixed DTR/RTS bug that caused the card to indicate + * "don't send data" to a modem after the password prompt. + * Fixed bug for premature (fake) interrupts. + * Revision 1.5: April 19th 1997 + * fixed a minor typo in the header file, cleanup a little. + * performance warnings are now MAXed at once per minute. + * Revision 1.6: May 23 1997 + * Changed the specialix=... format to include interrupt. + * Revision 1.7: May 27 1997 + * Made many more debug printk's a compile time option. + * Revision 1.8: Jul 1 1997 + * port to linux-2.1.43 kernel. + * Revision 1.9: Oct 9 1998 + * Added stuff for the IO8+/PCI version. + * Revision 1.10: Oct 22 1999 / Jan 21 2000. + * Added stuff for setserial. + * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr) + * + */ + +#define VERSION "1.11" + + +/* + * There is a bunch of documentation about the card, jumpers, config + * settings, restrictions, cables, device names and numbers in + * Documentation/serial/specialix.txt + */ + +#include <linux/module.h> + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/mm.h> +#include <linux/serial.h> +#include <linux/fcntl.h> +#include <linux/major.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/gfp.h> + +#include "specialix_io8.h" +#include "cd1865.h" + + +/* + This driver can spew a whole lot of debugging output at you. If you + need maximum performance, you should disable the DEBUG define. To + aid in debugging in the field, I'm leaving the compile-time debug + features enabled, and disable them "runtime". That allows me to + instruct people with problems to enable debugging without requiring + them to recompile... +*/ +#define DEBUG + +static int sx_debug; +static int sx_rxfifo = SPECIALIX_RXFIFO; +static int sx_rtscts; + +#ifdef DEBUG +#define dprintk(f, str...) if (sx_debug & f) printk(str) +#else +#define dprintk(f, str...) /* nothing */ +#endif + +#define SX_DEBUG_FLOW 0x0001 +#define SX_DEBUG_DATA 0x0002 +#define SX_DEBUG_PROBE 0x0004 +#define SX_DEBUG_CHAN 0x0008 +#define SX_DEBUG_INIT 0x0010 +#define SX_DEBUG_RX 0x0020 +#define SX_DEBUG_TX 0x0040 +#define SX_DEBUG_IRQ 0x0080 +#define SX_DEBUG_OPEN 0x0100 +#define SX_DEBUG_TERMIOS 0x0200 +#define SX_DEBUG_SIGNALS 0x0400 +#define SX_DEBUG_FIFO 0x0800 + + +#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__) +#define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__) + + +/* Configurable options: */ + +/* Am I paranoid or not ? ;-) */ +#define SPECIALIX_PARANOIA_CHECK + +/* + * The following defines are mostly for testing purposes. But if you need + * some nice reporting in your syslog, you can define them also. + */ +#undef SX_REPORT_FIFO +#undef SX_REPORT_OVERRUN + + + + +#define SPECIALIX_LEGAL_FLAGS \ + (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ + ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ + ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) + +static struct tty_driver *specialix_driver; + +static struct specialix_board sx_board[SX_NBOARD] = { + { 0, SX_IOBASE1, 9, }, + { 0, SX_IOBASE2, 11, }, + { 0, SX_IOBASE3, 12, }, + { 0, SX_IOBASE4, 15, }, +}; + +static struct specialix_port sx_port[SX_NBOARD * SX_NPORT]; + + +static int sx_paranoia_check(struct specialix_port const *port, + char *name, const char *routine) +{ +#ifdef SPECIALIX_PARANOIA_CHECK + static const char *badmagic = KERN_ERR + "sx: Warning: bad specialix port magic number for device %s in %s\n"; + static const char *badinfo = KERN_ERR + "sx: Warning: null specialix port for device %s in %s\n"; + + if (!port) { + printk(badinfo, name, routine); + return 1; + } + if (port->magic != SPECIALIX_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + + +/* + * + * Service functions for specialix IO8+ driver. + * + */ + +/* Get board number from pointer */ +static inline int board_No(struct specialix_board *bp) +{ + return bp - sx_board; +} + + +/* Get port number from pointer */ +static inline int port_No(struct specialix_port const *port) +{ + return SX_PORT(port - sx_port); +} + + +/* Get pointer to board from pointer to port */ +static inline struct specialix_board *port_Board( + struct specialix_port const *port) +{ + return &sx_board[SX_BOARD(port - sx_port)]; +} + + +/* Input Byte from CL CD186x register */ +static inline unsigned char sx_in(struct specialix_board *bp, + unsigned short reg) +{ + bp->reg = reg | 0x80; + outb(reg | 0x80, bp->base + SX_ADDR_REG); + return inb(bp->base + SX_DATA_REG); +} + + +/* Output Byte to CL CD186x register */ +static inline void sx_out(struct specialix_board *bp, unsigned short reg, + unsigned char val) +{ + bp->reg = reg | 0x80; + outb(reg | 0x80, bp->base + SX_ADDR_REG); + outb(val, bp->base + SX_DATA_REG); +} + + +/* Input Byte from CL CD186x register */ +static inline unsigned char sx_in_off(struct specialix_board *bp, + unsigned short reg) +{ + bp->reg = reg; + outb(reg, bp->base + SX_ADDR_REG); + return inb(bp->base + SX_DATA_REG); +} + + +/* Output Byte to CL CD186x register */ +static inline void sx_out_off(struct specialix_board *bp, + unsigned short reg, unsigned char val) +{ + bp->reg = reg; + outb(reg, bp->base + SX_ADDR_REG); + outb(val, bp->base + SX_DATA_REG); +} + + +/* Wait for Channel Command Register ready */ +static void sx_wait_CCR(struct specialix_board *bp) +{ + unsigned long delay, flags; + unsigned char ccr; + + for (delay = SX_CCR_TIMEOUT; delay; delay--) { + spin_lock_irqsave(&bp->lock, flags); + ccr = sx_in(bp, CD186x_CCR); + spin_unlock_irqrestore(&bp->lock, flags); + if (!ccr) + return; + udelay(1); + } + + printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); +} + + +/* Wait for Channel Command Register ready */ +static void sx_wait_CCR_off(struct specialix_board *bp) +{ + unsigned long delay; + unsigned char crr; + unsigned long flags; + + for (delay = SX_CCR_TIMEOUT; delay; delay--) { + spin_lock_irqsave(&bp->lock, flags); + crr = sx_in_off(bp, CD186x_CCR); + spin_unlock_irqrestore(&bp->lock, flags); + if (!crr) + return; + udelay(1); + } + + printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); +} + + +/* + * specialix IO8+ IO range functions. + */ + +static int sx_request_io_range(struct specialix_board *bp) +{ + return request_region(bp->base, + bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, + "specialix IO8+") == NULL; +} + + +static void sx_release_io_range(struct specialix_board *bp) +{ + release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? + SX_PCI_IO_SPACE : SX_IO_SPACE); +} + + +/* Set the IRQ using the RTS lines that run to the PAL on the board.... */ +static int sx_set_irq(struct specialix_board *bp) +{ + int virq; + int i; + unsigned long flags; + + if (bp->flags & SX_BOARD_IS_PCI) + return 1; + switch (bp->irq) { + /* In the same order as in the docs... */ + case 15: + virq = 0; + break; + case 12: + virq = 1; + break; + case 11: + virq = 2; + break; + case 9: + virq = 3; + break; + default:printk(KERN_ERR + "Speclialix: cannot set irq to %d.\n", bp->irq); + return 0; + } + spin_lock_irqsave(&bp->lock, flags); + for (i = 0; i < 2; i++) { + sx_out(bp, CD186x_CAR, i); + sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0); + } + spin_unlock_irqrestore(&bp->lock, flags); + return 1; +} + + +/* Reset and setup CD186x chip */ +static int sx_init_CD186x(struct specialix_board *bp) +{ + unsigned long flags; + int scaler; + int rv = 1; + + func_enter(); + sx_wait_CCR_off(bp); /* Wait for CCR ready */ + spin_lock_irqsave(&bp->lock, flags); + sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */ + spin_unlock_irqrestore(&bp->lock, flags); + msleep(50); /* Delay 0.05 sec */ + spin_lock_irqsave(&bp->lock, flags); + sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */ + sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */ + sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */ + sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */ + sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */ + /* Set RegAckEn */ + sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN); + + /* Setting up prescaler. We need 4 ticks per 1 ms */ + scaler = SX_OSCFREQ/SPECIALIX_TPS; + + sx_out_off(bp, CD186x_PPRH, scaler >> 8); + sx_out_off(bp, CD186x_PPRL, scaler & 0xff); + spin_unlock_irqrestore(&bp->lock, flags); + + if (!sx_set_irq(bp)) { + /* Figure out how to pass this along... */ + printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq); + rv = 0; + } + + func_exit(); + return rv; +} + + +static int read_cross_byte(struct specialix_board *bp, int reg, int bit) +{ + int i; + int t; + unsigned long flags; + + spin_lock_irqsave(&bp->lock, flags); + for (i = 0, t = 0; i < 8; i++) { + sx_out_off(bp, CD186x_CAR, i); + if (sx_in_off(bp, reg) & bit) + t |= 1 << i; + } + spin_unlock_irqrestore(&bp->lock, flags); + + return t; +} + + +/* Main probing routine, also sets irq. */ +static int sx_probe(struct specialix_board *bp) +{ + unsigned char val1, val2; + int rev; + int chip; + + func_enter(); + + if (sx_request_io_range(bp)) { + func_exit(); + return 1; + } + + /* Are the I/O ports here ? */ + sx_out_off(bp, CD186x_PPRL, 0x5a); + udelay(1); + val1 = sx_in_off(bp, CD186x_PPRL); + + sx_out_off(bp, CD186x_PPRL, 0xa5); + udelay(1); + val2 = sx_in_off(bp, CD186x_PPRL); + + + if (val1 != 0x5a || val2 != 0xa5) { + printk(KERN_INFO + "sx%d: specialix IO8+ Board at 0x%03x not found.\n", + board_No(bp), bp->base); + sx_release_io_range(bp); + func_exit(); + return 1; + } + + /* Check the DSR lines that Specialix uses as board + identification */ + val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR); + val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS); + dprintk(SX_DEBUG_INIT, + "sx%d: DSR lines are: %02x, rts lines are: %02x\n", + board_No(bp), val1, val2); + + /* They managed to switch the bit order between the docs and + the IO8+ card. The new PCI card now conforms to old docs. + They changed the PCI docs to reflect the situation on the + old card. */ + val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2; + if (val1 != val2) { + printk(KERN_INFO + "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n", + board_No(bp), val2, bp->base, val1); + sx_release_io_range(bp); + func_exit(); + return 1; + } + + + /* Reset CD186x again */ + if (!sx_init_CD186x(bp)) { + sx_release_io_range(bp); + func_exit(); + return 1; + } + + sx_request_io_range(bp); + bp->flags |= SX_BOARD_PRESENT; + + /* Chip revcode pkgtype + GFRCR SRCR bit 7 + CD180 rev B 0x81 0 + CD180 rev C 0x82 0 + CD1864 rev A 0x82 1 + CD1865 rev A 0x83 1 -- Do not use!!! Does not work. + CD1865 rev B 0x84 1 + -- Thanks to Gwen Wang, Cirrus Logic. + */ + + switch (sx_in_off(bp, CD186x_GFRCR)) { + case 0x82: + chip = 1864; + rev = 'A'; + break; + case 0x83: + chip = 1865; + rev = 'A'; + break; + case 0x84: + chip = 1865; + rev = 'B'; + break; + case 0x85: + chip = 1865; + rev = 'C'; + break; /* Does not exist at this time */ + default: + chip = -1; + rev = 'x'; + } + + dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR)); + + printk(KERN_INFO + "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n", + board_No(bp), bp->base, bp->irq, chip, rev); + + func_exit(); + return 0; +} + +/* + * + * Interrupt processing routines. + * */ + +static struct specialix_port *sx_get_port(struct specialix_board *bp, + unsigned char const *what) +{ + unsigned char channel; + struct specialix_port *port = NULL; + + channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF; + dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel); + if (channel < CD186x_NCH) { + port = &sx_port[board_No(bp) * SX_NPORT + channel]; + dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n", + board_No(bp) * SX_NPORT + channel, port, + port->port.flags & ASYNC_INITIALIZED); + + if (port->port.flags & ASYNC_INITIALIZED) { + dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port); + func_exit(); + return port; + } + } + printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", + board_No(bp), what, channel); + return NULL; +} + + +static void sx_receive_exc(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char status; + unsigned char ch, flag; + + func_enter(); + + port = sx_get_port(bp, "Receive"); + if (!port) { + dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); + func_exit(); + return; + } + tty = port->port.tty; + + status = sx_in(bp, CD186x_RCSR); + + dprintk(SX_DEBUG_RX, "status: 0x%x\n", status); + if (status & RCSR_OE) { + port->overrun++; + dprintk(SX_DEBUG_FIFO, + "sx%d: port %d: Overrun. Total %ld overruns.\n", + board_No(bp), port_No(port), port->overrun); + } + status &= port->mark_mask; + + /* This flip buffer check needs to be below the reading of the + status register to reset the chip's IRQ.... */ + if (tty_buffer_request_room(tty, 1) == 0) { + dprintk(SX_DEBUG_FIFO, + "sx%d: port %d: Working around flip buffer overflow.\n", + board_No(bp), port_No(port)); + func_exit(); + return; + } + + ch = sx_in(bp, CD186x_RDR); + if (!status) { + func_exit(); + return; + } + if (status & RCSR_TOUT) { + printk(KERN_INFO + "sx%d: port %d: Receiver timeout. Hardware problems ?\n", + board_No(bp), port_No(port)); + func_exit(); + return; + + } else if (status & RCSR_BREAK) { + dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n", + board_No(bp), port_No(port)); + flag = TTY_BREAK; + if (port->port.flags & ASYNC_SAK) + do_SAK(tty); + + } else if (status & RCSR_PE) + flag = TTY_PARITY; + + else if (status & RCSR_FE) + flag = TTY_FRAME; + + else if (status & RCSR_OE) + flag = TTY_OVERRUN; + + else + flag = TTY_NORMAL; + + if (tty_insert_flip_char(tty, ch, flag)) + tty_flip_buffer_push(tty); + func_exit(); +} + + +static void sx_receive(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char count; + + func_enter(); + + port = sx_get_port(bp, "Receive"); + if (port == NULL) { + dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); + func_exit(); + return; + } + tty = port->port.tty; + + count = sx_in(bp, CD186x_RDCR); + dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count); + port->hits[count > 8 ? 9 : count]++; + + while (count--) + tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); + tty_flip_buffer_push(tty); + func_exit(); +} + + +static void sx_transmit(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char count; + + func_enter(); + port = sx_get_port(bp, "Transmit"); + if (port == NULL) { + func_exit(); + return; + } + dprintk(SX_DEBUG_TX, "port: %p\n", port); + tty = port->port.tty; + + if (port->IER & IER_TXEMPTY) { + /* FIFO drained */ + sx_out(bp, CD186x_CAR, port_No(port)); + port->IER &= ~IER_TXEMPTY; + sx_out(bp, CD186x_IER, port->IER); + func_exit(); + return; + } + + if ((port->xmit_cnt <= 0 && !port->break_length) + || tty->stopped || tty->hw_stopped) { + sx_out(bp, CD186x_CAR, port_No(port)); + port->IER &= ~IER_TXRDY; + sx_out(bp, CD186x_IER, port->IER); + func_exit(); + return; + } + + if (port->break_length) { + if (port->break_length > 0) { + if (port->COR2 & COR2_ETC) { + sx_out(bp, CD186x_TDR, CD186x_C_ESC); + sx_out(bp, CD186x_TDR, CD186x_C_SBRK); + port->COR2 &= ~COR2_ETC; + } + count = min_t(int, port->break_length, 0xff); + sx_out(bp, CD186x_TDR, CD186x_C_ESC); + sx_out(bp, CD186x_TDR, CD186x_C_DELAY); + sx_out(bp, CD186x_TDR, count); + port->break_length -= count; + if (port->break_length == 0) + port->break_length--; + } else { + sx_out(bp, CD186x_TDR, CD186x_C_ESC); + sx_out(bp, CD186x_TDR, CD186x_C_EBRK); + sx_out(bp, CD186x_COR2, port->COR2); + sx_wait_CCR(bp); + sx_out(bp, CD186x_CCR, CCR_CORCHG2); + port->break_length = 0; + } + + func_exit(); + return; + } + + count = CD186x_NFIFO; + do { + sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); + if (--port->xmit_cnt <= 0) + break; + } while (--count > 0); + + if (port->xmit_cnt <= 0) { + sx_out(bp, CD186x_CAR, port_No(port)); + port->IER &= ~IER_TXRDY; + sx_out(bp, CD186x_IER, port->IER); + } + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + + func_exit(); +} + + +static void sx_check_modem(struct specialix_board *bp) +{ + struct specialix_port *port; + struct tty_struct *tty; + unsigned char mcr; + int msvr_cd; + + dprintk(SX_DEBUG_SIGNALS, "Modem intr. "); + port = sx_get_port(bp, "Modem"); + if (port == NULL) + return; + + tty = port->port.tty; + + mcr = sx_in(bp, CD186x_MCR); + + if ((mcr & MCR_CDCHG)) { + dprintk(SX_DEBUG_SIGNALS, "CD just changed... "); + msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD; + if (msvr_cd) { + dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n"); + wake_up_interruptible(&port->port.open_wait); + } else { + dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n"); + tty_hangup(tty); + } + } + +#ifdef SPECIALIX_BRAIN_DAMAGED_CTS + if (mcr & MCR_CTSCHG) { + if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) { + tty->hw_stopped = 0; + port->IER |= IER_TXRDY; + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + } else { + tty->hw_stopped = 1; + port->IER &= ~IER_TXRDY; + } + sx_out(bp, CD186x_IER, port->IER); + } + if (mcr & MCR_DSSXHG) { + if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) { + tty->hw_stopped = 0; + port->IER |= IER_TXRDY; + if (port->xmit_cnt <= port->wakeup_chars) + tty_wakeup(tty); + } else { + tty->hw_stopped = 1; + port->IER &= ~IER_TXRDY; + } + sx_out(bp, CD186x_IER, port->IER); + } +#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */ + + /* Clear change bits */ + sx_out(bp, CD186x_MCR, 0); +} + + +/* The main interrupt processing routine */ +static irqreturn_t sx_interrupt(int dummy, void *dev_id) +{ + unsigned char status; + unsigned char ack; + struct specialix_board *bp = dev_id; + unsigned long loop = 0; + int saved_reg; + unsigned long flags; + + func_enter(); + + spin_lock_irqsave(&bp->lock, flags); + + dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, + port_No(sx_get_port(bp, "INT")), + SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1); + if (!(bp->flags & SX_BOARD_ACTIVE)) { + dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", + bp->irq); + spin_unlock_irqrestore(&bp->lock, flags); + func_exit(); + return IRQ_NONE; + } + + saved_reg = bp->reg; + + while (++loop < 16) { + status = sx_in(bp, CD186x_SRSR) & + (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint); + if (status == 0) + break; + if (status & SRSR_RREQint) { + ack = sx_in(bp, CD186x_RRAR); + + if (ack == (SX_ID | GIVR_IT_RCV)) + sx_receive(bp); + else if (ack == (SX_ID | GIVR_IT_REXC)) + sx_receive_exc(bp); + else + printk(KERN_ERR + "sx%d: status: 0x%x Bad receive ack 0x%02x.\n", + board_No(bp), status, ack); + + } else if (status & SRSR_TREQint) { + ack = sx_in(bp, CD186x_TRAR); + + if (ack == (SX_ID | GIVR_IT_TX)) + sx_transmit(bp); + else + printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n", + board_No(bp), status, ack, + port_No(sx_get_port(bp, "Int"))); + } else if (status & SRSR_MREQint) { + ack = sx_in(bp, CD186x_MRAR); + + if (ack == (SX_ID | GIVR_IT_MODEM)) + sx_check_modem(bp); + else + printk(KERN_ERR + "sx%d: status: 0x%x Bad modem ack 0x%02x.\n", + board_No(bp), status, ack); + + } + + sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */ + } + bp->reg = saved_reg; + outb(bp->reg, bp->base + SX_ADDR_REG); + spin_unlock_irqrestore(&bp->lock, flags); + func_exit(); + return IRQ_HANDLED; +} + + +/* + * Routines for open & close processing. + */ + +static void turn_ints_off(struct specialix_board *bp) +{ + unsigned long flags; + + func_enter(); + spin_lock_irqsave(&bp->lock, flags); + (void) sx_in_off(bp, 0); /* Turn off interrupts. */ + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + +static void turn_ints_on(struct specialix_board *bp) +{ + unsigned long flags; + + func_enter(); + + spin_lock_irqsave(&bp->lock, flags); + (void) sx_in(bp, 0); /* Turn ON interrupts. */ + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +/* Called with disabled interrupts */ +static int sx_setup_board(struct specialix_board *bp) +{ + int error; + + if (bp->flags & SX_BOARD_ACTIVE) + return 0; + + if (bp->flags & SX_BOARD_IS_PCI) + error = request_irq(bp->irq, sx_interrupt, + IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp); + else + error = request_irq(bp->irq, sx_interrupt, + IRQF_DISABLED, "specialix IO8+", bp); + + if (error) + return error; + + turn_ints_on(bp); + bp->flags |= SX_BOARD_ACTIVE; + + return 0; +} + + +/* Called with disabled interrupts */ +static void sx_shutdown_board(struct specialix_board *bp) +{ + func_enter(); + + if (!(bp->flags & SX_BOARD_ACTIVE)) { + func_exit(); + return; + } + + bp->flags &= ~SX_BOARD_ACTIVE; + + dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n", + bp->irq, board_No(bp)); + free_irq(bp->irq, bp); + turn_ints_off(bp); + func_exit(); +} + +static unsigned int sx_crtscts(struct tty_struct *tty) +{ + if (sx_rtscts) + return C_CRTSCTS(tty); + return 1; +} + +/* + * Setting up port characteristics. + * Must be called with disabled interrupts + */ +static void sx_change_speed(struct specialix_board *bp, + struct specialix_port *port) +{ + struct tty_struct *tty; + unsigned long baud; + long tmp; + unsigned char cor1 = 0, cor3 = 0; + unsigned char mcor1 = 0, mcor2 = 0; + static unsigned long again; + unsigned long flags; + + func_enter(); + + tty = port->port.tty; + if (!tty || !tty->termios) { + func_exit(); + return; + } + + port->IER = 0; + port->COR2 = 0; + /* Select port on the board */ + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + + /* The Specialix board doens't implement the RTS lines. + They are used to set the IRQ level. Don't touch them. */ + if (sx_crtscts(tty)) + port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); + else + port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS); + spin_unlock_irqrestore(&bp->lock, flags); + dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR); + baud = tty_get_baud_rate(tty); + + if (baud == 38400) { + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + baud = 57600; + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + baud = 115200; + } + + if (!baud) { + /* Drop DTR & exit */ + dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); + if (!sx_crtscts(tty)) { + port->MSVR &= ~MSVR_DTR; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + } else + dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n"); + return; + } else { + /* Set DTR on */ + if (!sx_crtscts(tty)) + port->MSVR |= MSVR_DTR; + } + + /* + * Now we must calculate some speed depended things + */ + + /* Set baud rate for port */ + tmp = port->custom_divisor ; + if (tmp) + printk(KERN_INFO + "sx%d: Using custom baud rate divisor %ld. \n" + "This is an untested option, please be careful.\n", + port_No(port), tmp); + else + tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) / + CD186x_TPC); + + if (tmp < 0x10 && time_before(again, jiffies)) { + again = jiffies + HZ * 60; + /* Page 48 of version 2.0 of the CL-CD1865 databook */ + if (tmp >= 12) { + printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" + "Performance degradation is possible.\n" + "Read specialix.txt for more info.\n", + port_No(port), tmp); + } else { + printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" + "Warning: overstressing Cirrus chip. This might not work.\n" + "Read specialix.txt for more info.\n", port_No(port), tmp); + } + } + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); + sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); + sx_out(bp, CD186x_RBPRL, tmp & 0xff); + sx_out(bp, CD186x_TBPRL, tmp & 0xff); + spin_unlock_irqrestore(&bp->lock, flags); + if (port->custom_divisor) + baud = (SX_OSCFREQ + port->custom_divisor/2) / + port->custom_divisor; + baud = (baud + 5) / 10; /* Estimated CPS */ + + /* Two timer ticks seems enough to wakeup something like SLIP driver */ + tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; + port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? + SERIAL_XMIT_SIZE - 1 : tmp); + + /* Receiver timeout will be transmission time for 1.5 chars */ + tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud; + tmp = (tmp > 0xff) ? 0xff : tmp; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_RTPR, tmp); + spin_unlock_irqrestore(&bp->lock, flags); + switch (C_CSIZE(tty)) { + case CS5: + cor1 |= COR1_5BITS; + break; + case CS6: + cor1 |= COR1_6BITS; + break; + case CS7: + cor1 |= COR1_7BITS; + break; + case CS8: + cor1 |= COR1_8BITS; + break; + } + + if (C_CSTOPB(tty)) + cor1 |= COR1_2SB; + + cor1 |= COR1_IGNORE; + if (C_PARENB(tty)) { + cor1 |= COR1_NORMPAR; + if (C_PARODD(tty)) + cor1 |= COR1_ODDP; + if (I_INPCK(tty)) + cor1 &= ~COR1_IGNORE; + } + /* Set marking of some errors */ + port->mark_mask = RCSR_OE | RCSR_TOUT; + if (I_INPCK(tty)) + port->mark_mask |= RCSR_FE | RCSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + port->mark_mask |= RCSR_BREAK; + if (I_IGNPAR(tty)) + port->mark_mask &= ~(RCSR_FE | RCSR_PE); + if (I_IGNBRK(tty)) { + port->mark_mask &= ~RCSR_BREAK; + if (I_IGNPAR(tty)) + /* Real raw mode. Ignore all */ + port->mark_mask &= ~RCSR_OE; + } + /* Enable Hardware Flow Control */ + if (C_CRTSCTS(tty)) { +#ifdef SPECIALIX_BRAIN_DAMAGED_CTS + port->IER |= IER_DSR | IER_CTS; + mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; + mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; + spin_lock_irqsave(&bp->lock, flags); + tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & + (MSVR_CTS|MSVR_DSR)); + spin_unlock_irqrestore(&bp->lock, flags); +#else + port->COR2 |= COR2_CTSAE; +#endif + } + /* Enable Software Flow Control. FIXME: I'm not sure about this */ + /* Some people reported that it works, but I still doubt it */ + if (I_IXON(tty)) { + port->COR2 |= COR2_TXIBE; + cor3 |= (COR3_FCT | COR3_SCDE); + if (I_IXANY(tty)) + port->COR2 |= COR2_IXM; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_SCHR1, START_CHAR(tty)); + sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty)); + sx_out(bp, CD186x_SCHR3, START_CHAR(tty)); + sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty)); + spin_unlock_irqrestore(&bp->lock, flags); + } + if (!C_CLOCAL(tty)) { + /* Enable CD check */ + port->IER |= IER_CD; + mcor1 |= MCOR1_CDZD; + mcor2 |= MCOR2_CDOD; + } + + if (C_CREAD(tty)) + /* Enable receiver */ + port->IER |= IER_RXD; + + /* Set input FIFO size (1-8 bytes) */ + cor3 |= sx_rxfifo; + /* Setting up CD186x channel registers */ + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_COR1, cor1); + sx_out(bp, CD186x_COR2, port->COR2); + sx_out(bp, CD186x_COR3, cor3); + spin_unlock_irqrestore(&bp->lock, flags); + /* Make CD186x know about registers change */ + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); + /* Setting up modem option registers */ + dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", + mcor1, mcor2); + sx_out(bp, CD186x_MCOR1, mcor1); + sx_out(bp, CD186x_MCOR2, mcor2); + spin_unlock_irqrestore(&bp->lock, flags); + /* Enable CD186x transmitter & receiver */ + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN); + /* Enable interrupts */ + sx_out(bp, CD186x_IER, port->IER); + /* And finally set the modem lines... */ + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +/* Must be called with interrupts enabled */ +static int sx_setup_port(struct specialix_board *bp, + struct specialix_port *port) +{ + unsigned long flags; + + func_enter(); + + if (port->port.flags & ASYNC_INITIALIZED) { + func_exit(); + return 0; + } + + if (!port->xmit_buf) { + /* We may sleep in get_zeroed_page() */ + unsigned long tmp; + + tmp = get_zeroed_page(GFP_KERNEL); + if (tmp == 0L) { + func_exit(); + return -ENOMEM; + } + + if (port->xmit_buf) { + free_page(tmp); + func_exit(); + return -ERESTARTSYS; + } + port->xmit_buf = (unsigned char *) tmp; + } + + spin_lock_irqsave(&port->lock, flags); + + if (port->port.tty) + clear_bit(TTY_IO_ERROR, &port->port.tty->flags); + + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + sx_change_speed(bp, port); + port->port.flags |= ASYNC_INITIALIZED; + + spin_unlock_irqrestore(&port->lock, flags); + + + func_exit(); + return 0; +} + + +/* Must be called with interrupts disabled */ +static void sx_shutdown_port(struct specialix_board *bp, + struct specialix_port *port) +{ + struct tty_struct *tty; + int i; + unsigned long flags; + + func_enter(); + + if (!(port->port.flags & ASYNC_INITIALIZED)) { + func_exit(); + return; + } + + if (sx_debug & SX_DEBUG_FIFO) { + dprintk(SX_DEBUG_FIFO, + "sx%d: port %d: %ld overruns, FIFO hits [ ", + board_No(bp), port_No(port), port->overrun); + for (i = 0; i < 10; i++) + dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]); + dprintk(SX_DEBUG_FIFO, "].\n"); + } + + if (port->xmit_buf) { + free_page((unsigned long) port->xmit_buf); + port->xmit_buf = NULL; + } + + /* Select port */ + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + + tty = port->port.tty; + if (tty == NULL || C_HUPCL(tty)) { + /* Drop DTR */ + sx_out(bp, CD186x_MSVDTR, 0); + } + spin_unlock_irqrestore(&bp->lock, flags); + /* Reset port */ + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_SOFTRESET); + /* Disable all interrupts from this port */ + port->IER = 0; + sx_out(bp, CD186x_IER, port->IER); + spin_unlock_irqrestore(&bp->lock, flags); + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); + port->port.flags &= ~ASYNC_INITIALIZED; + + if (!bp->count) + sx_shutdown_board(bp); + func_exit(); +} + + +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct specialix_port *port) +{ + DECLARE_WAITQUEUE(wait, current); + struct specialix_board *bp = port_Board(port); + int retval; + int do_clocal = 0; + int CD; + unsigned long flags; + + func_enter(); + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->port.close_wait); + if (port->port.flags & ASYNC_HUP_NOTIFY) { + func_exit(); + return -EAGAIN; + } else { + func_exit(); + return -ERESTARTSYS; + } + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + port->port.flags |= ASYNC_NORMAL_ACTIVE; + func_exit(); + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&port->port.open_wait, &wait); + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->port.count--; + spin_unlock_irqrestore(&port->lock, flags); + port->port.blocked_open++; + while (1) { + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + CD = sx_in(bp, CD186x_MSVR) & MSVR_CD; + if (sx_crtscts(tty)) { + /* Activate RTS */ + port->MSVR |= MSVR_DTR; /* WTF? */ + sx_out(bp, CD186x_MSVR, port->MSVR); + } else { + /* Activate DTR */ + port->MSVR |= MSVR_DTR; + sx_out(bp, CD186x_MSVR, port->MSVR); + } + spin_unlock_irqrestore(&bp->lock, flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(port->port.flags & ASYNC_INITIALIZED)) { + if (port->port.flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + if (!(port->port.flags & ASYNC_CLOSING) && + (do_clocal || CD)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + tty_unlock(); + schedule(); + tty_lock(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->port.open_wait, &wait); + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->port.count++; + port->port.blocked_open--; + spin_unlock_irqrestore(&port->lock, flags); + if (retval) { + func_exit(); + return retval; + } + + port->port.flags |= ASYNC_NORMAL_ACTIVE; + func_exit(); + return 0; +} + + +static int sx_open(struct tty_struct *tty, struct file *filp) +{ + int board; + int error; + struct specialix_port *port; + struct specialix_board *bp; + int i; + unsigned long flags; + + func_enter(); + + board = SX_BOARD(tty->index); + + if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) { + func_exit(); + return -ENODEV; + } + + bp = &sx_board[board]; + port = sx_port + board * SX_NPORT + SX_PORT(tty->index); + port->overrun = 0; + for (i = 0; i < 10; i++) + port->hits[i] = 0; + + dprintk(SX_DEBUG_OPEN, + "Board = %d, bp = %p, port = %p, portno = %d.\n", + board, bp, port, SX_PORT(tty->index)); + + if (sx_paranoia_check(port, tty->name, "sx_open")) { + func_enter(); + return -ENODEV; + } + + error = sx_setup_board(bp); + if (error) { + func_exit(); + return error; + } + + spin_lock_irqsave(&bp->lock, flags); + port->port.count++; + bp->count++; + tty->driver_data = port; + port->port.tty = tty; + spin_unlock_irqrestore(&bp->lock, flags); + + error = sx_setup_port(bp, port); + if (error) { + func_enter(); + return error; + } + + error = block_til_ready(tty, filp, port); + if (error) { + func_enter(); + return error; + } + + func_exit(); + return 0; +} + +static void sx_flush_buffer(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) { + func_exit(); + return; + } + + bp = port_Board(port); + spin_lock_irqsave(&port->lock, flags); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + spin_unlock_irqrestore(&port->lock, flags); + tty_wakeup(tty); + + func_exit(); +} + +static void sx_close(struct tty_struct *tty, struct file *filp) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + unsigned long timeout; + + func_enter(); + if (!port || sx_paranoia_check(port, tty->name, "close")) { + func_exit(); + return; + } + spin_lock_irqsave(&port->lock, flags); + + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + func_exit(); + return; + } + + bp = port_Board(port); + if (tty->count == 1 && port->port.count != 1) { + printk(KERN_ERR "sx%d: sx_close: bad port count;" + " tty->count is 1, port count is %d\n", + board_No(bp), port->port.count); + port->port.count = 1; + } + + if (port->port.count > 1) { + port->port.count--; + bp->count--; + + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); + return; + } + port->port.flags |= ASYNC_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + dprintk(SX_DEBUG_OPEN, "Closing\n"); + if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->port.closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + dprintk(SX_DEBUG_OPEN, "Closed\n"); + port->IER &= ~IER_RXD; + if (port->port.flags & ASYNC_INITIALIZED) { + port->IER &= ~IER_TXRDY; + port->IER |= IER_TXEMPTY; + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock_irqrestore(&bp->lock, flags); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies+HZ; + while (port->IER & IER_TXEMPTY) { + set_current_state(TASK_INTERRUPTIBLE); + msleep_interruptible(jiffies_to_msecs(port->timeout)); + if (time_after(jiffies, timeout)) { + printk(KERN_INFO "Timeout waiting for close\n"); + break; + } + } + + } + + if (--bp->count < 0) { + printk(KERN_ERR + "sx%d: sx_shutdown_port: bad board count: %d port: %d\n", + board_No(bp), bp->count, tty->index); + bp->count = 0; + } + if (--port->port.count < 0) { + printk(KERN_ERR + "sx%d: sx_close: bad port count for tty%d: %d\n", + board_No(bp), port_No(port), port->port.count); + port->port.count = 0; + } + + sx_shutdown_port(bp, port); + sx_flush_buffer(tty); + tty_ldisc_flush(tty); + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + port->port.tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + if (port->port.blocked_open) { + if (port->port.close_delay) + msleep_interruptible( + jiffies_to_msecs(port->port.close_delay)); + wake_up_interruptible(&port->port.open_wait); + } + port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&port->port.close_wait); + + func_exit(); +} + + +static int sx_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + int c, total = 0; + unsigned long flags; + + func_enter(); + if (sx_paranoia_check(port, tty->name, "sx_write")) { + func_exit(); + return 0; + } + + bp = port_Board(port); + + if (!port->xmit_buf) { + func_exit(); + return 0; + } + + while (1) { + spin_lock_irqsave(&port->lock, flags); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, + SERIAL_XMIT_SIZE - port->xmit_head)); + if (c <= 0) { + spin_unlock_irqrestore(&port->lock, flags); + break; + } + memcpy(port->xmit_buf + port->xmit_head, buf, c); + port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + port->xmit_cnt += c; + spin_unlock_irqrestore(&port->lock, flags); + + buf += c; + count -= c; + total += c; + } + + spin_lock_irqsave(&bp->lock, flags); + if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && + !(port->IER & IER_TXRDY)) { + port->IER |= IER_TXRDY; + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + } + spin_unlock_irqrestore(&bp->lock, flags); + func_exit(); + + return total; +} + + +static int sx_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_put_char")) { + func_exit(); + return 0; + } + dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf); + if (!port->xmit_buf) { + func_exit(); + return 0; + } + bp = port_Board(port); + spin_lock_irqsave(&port->lock, flags); + + dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", + port->xmit_cnt, port->xmit_buf); + if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) { + spin_unlock_irqrestore(&port->lock, flags); + dprintk(SX_DEBUG_TX, "Exit size\n"); + func_exit(); + return 0; + } + dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf); + port->xmit_buf[port->xmit_head++] = ch; + port->xmit_head &= SERIAL_XMIT_SIZE - 1; + port->xmit_cnt++; + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); + return 1; +} + + +static void sx_flush_chars(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp = port_Board(port); + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) { + func_exit(); + return; + } + if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !port->xmit_buf) { + func_exit(); + return; + } + spin_lock_irqsave(&bp->lock, flags); + port->IER |= IER_TXRDY; + sx_out(port_Board(port), CD186x_CAR, port_No(port)); + sx_out(port_Board(port), CD186x_IER, port->IER); + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +static int sx_write_room(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + int ret; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_write_room")) { + func_exit(); + return 0; + } + + ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; + if (ret < 0) + ret = 0; + + func_exit(); + return ret; +} + + +static int sx_chars_in_buffer(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) { + func_exit(); + return 0; + } + func_exit(); + return port->xmit_cnt; +} + +static int sx_tiocmget(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned char status; + unsigned int result; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, __func__)) { + func_exit(); + return -ENODEV; + } + + bp = port_Board(port); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + status = sx_in(bp, CD186x_MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n", + port_No(port), status, sx_in(bp, CD186x_CAR)); + dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); + if (sx_crtscts(port->port.tty)) { + result = TIOCM_DTR | TIOCM_DSR + | ((status & MSVR_DTR) ? TIOCM_RTS : 0) + | ((status & MSVR_CD) ? TIOCM_CAR : 0) + | ((status & MSVR_CTS) ? TIOCM_CTS : 0); + } else { + result = TIOCM_RTS | TIOCM_DSR + | ((status & MSVR_DTR) ? TIOCM_DTR : 0) + | ((status & MSVR_CD) ? TIOCM_CAR : 0) + | ((status & MSVR_CTS) ? TIOCM_CTS : 0); + } + + func_exit(); + + return result; +} + + +static int sx_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, __func__)) { + func_exit(); + return -ENODEV; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + if (sx_crtscts(port->port.tty)) { + if (set & TIOCM_RTS) + port->MSVR |= MSVR_DTR; + } else { + if (set & TIOCM_DTR) + port->MSVR |= MSVR_DTR; + } + if (sx_crtscts(port->port.tty)) { + if (clear & TIOCM_RTS) + port->MSVR &= ~MSVR_DTR; + } else { + if (clear & TIOCM_DTR) + port->MSVR &= ~MSVR_DTR; + } + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + func_exit(); + return 0; +} + + +static int sx_send_break(struct tty_struct *tty, int length) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp = port_Board(port); + unsigned long flags; + + func_enter(); + if (length == 0 || length == -1) + return -EOPNOTSUPP; + + spin_lock_irqsave(&port->lock, flags); + port->break_length = SPECIALIX_TPS / HZ * length; + port->COR2 |= COR2_ETC; + port->IER |= IER_TXRDY; + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_COR2, port->COR2); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_CORCHG2); + spin_unlock_irqrestore(&bp->lock, flags); + sx_wait_CCR(bp); + + func_exit(); + return 0; +} + + +static int sx_set_serial_info(struct specialix_port *port, + struct serial_struct __user *newinfo) +{ + struct serial_struct tmp; + struct specialix_board *bp = port_Board(port); + int change_speed; + + func_enter(); + + if (copy_from_user(&tmp, newinfo, sizeof(tmp))) { + func_enter(); + return -EFAULT; + } + + mutex_lock(&port->port.mutex); + change_speed = ((port->port.flags & ASYNC_SPD_MASK) != + (tmp.flags & ASYNC_SPD_MASK)); + change_speed |= (tmp.custom_divisor != port->custom_divisor); + + if (!capable(CAP_SYS_ADMIN)) { + if ((tmp.close_delay != port->port.close_delay) || + (tmp.closing_wait != port->port.closing_wait) || + ((tmp.flags & ~ASYNC_USR_MASK) != + (port->port.flags & ~ASYNC_USR_MASK))) { + func_exit(); + mutex_unlock(&port->port.mutex); + return -EPERM; + } + port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | + (tmp.flags & ASYNC_USR_MASK)); + port->custom_divisor = tmp.custom_divisor; + } else { + port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | + (tmp.flags & ASYNC_FLAGS)); + port->port.close_delay = tmp.close_delay; + port->port.closing_wait = tmp.closing_wait; + port->custom_divisor = tmp.custom_divisor; + } + if (change_speed) + sx_change_speed(bp, port); + + func_exit(); + mutex_unlock(&port->port.mutex); + return 0; +} + + +static int sx_get_serial_info(struct specialix_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + struct specialix_board *bp = port_Board(port); + + func_enter(); + + memset(&tmp, 0, sizeof(tmp)); + mutex_lock(&port->port.mutex); + tmp.type = PORT_CIRRUS; + tmp.line = port - sx_port; + tmp.port = bp->base; + tmp.irq = bp->irq; + tmp.flags = port->port.flags; + tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC; + tmp.close_delay = port->port.close_delay * HZ/100; + tmp.closing_wait = port->port.closing_wait * HZ/100; + tmp.custom_divisor = port->custom_divisor; + tmp.xmit_fifo_size = CD186x_NFIFO; + mutex_unlock(&port->port.mutex); + if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { + func_exit(); + return -EFAULT; + } + + func_exit(); + return 0; +} + + +static int sx_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct specialix_port *port = tty->driver_data; + void __user *argp = (void __user *)arg; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_ioctl")) { + func_exit(); + return -ENODEV; + } + + switch (cmd) { + case TIOCGSERIAL: + func_exit(); + return sx_get_serial_info(port, argp); + case TIOCSSERIAL: + func_exit(); + return sx_set_serial_info(port, argp); + default: + func_exit(); + return -ENOIOCTLCMD; + } + func_exit(); + return 0; +} + + +static void sx_throttle(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_throttle")) { + func_exit(); + return; + } + + bp = port_Board(port); + + /* Use DTR instead of RTS ! */ + if (sx_crtscts(tty)) + port->MSVR &= ~MSVR_DTR; + else { + /* Auch!!! I think the system shouldn't call this then. */ + /* Or maybe we're supposed (allowed?) to do our side of hw + handshake anyway, even when hardware handshake is off. + When you see this in your logs, please report.... */ + printk(KERN_ERR + "sx%d: Need to throttle, but can't (hardware hs is off)\n", + port_No(port)); + } + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CAR, port_No(port)); + spin_unlock_irqrestore(&bp->lock, flags); + if (I_IXOFF(tty)) { + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_SSCH2); + spin_unlock_irqrestore(&bp->lock, flags); + sx_wait_CCR(bp); + } + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock_irqrestore(&bp->lock, flags); + + func_exit(); +} + + +static void sx_unthrottle(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) { + func_exit(); + return; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + /* XXXX Use DTR INSTEAD???? */ + if (sx_crtscts(tty)) + port->MSVR |= MSVR_DTR; + /* Else clause: see remark in "sx_throttle"... */ + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + spin_unlock(&bp->lock); + if (I_IXOFF(tty)) { + spin_unlock_irqrestore(&port->lock, flags); + sx_wait_CCR(bp); + spin_lock_irqsave(&bp->lock, flags); + sx_out(bp, CD186x_CCR, CCR_SSCH1); + spin_unlock_irqrestore(&bp->lock, flags); + sx_wait_CCR(bp); + spin_lock_irqsave(&port->lock, flags); + } + spin_lock(&bp->lock); + sx_out(bp, CD186x_MSVR, port->MSVR); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); +} + + +static void sx_stop(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_stop")) { + func_exit(); + return; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + port->IER &= ~IER_TXRDY; + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock(&bp->lock); + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); +} + + +static void sx_start(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_start")) { + func_exit(); + return; + } + + bp = port_Board(port); + + spin_lock_irqsave(&port->lock, flags); + if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { + port->IER |= IER_TXRDY; + spin_lock(&bp->lock); + sx_out(bp, CD186x_CAR, port_No(port)); + sx_out(bp, CD186x_IER, port->IER); + spin_unlock(&bp->lock); + } + spin_unlock_irqrestore(&port->lock, flags); + + func_exit(); +} + +static void sx_hangup(struct tty_struct *tty) +{ + struct specialix_port *port = tty->driver_data; + struct specialix_board *bp; + unsigned long flags; + + func_enter(); + + if (sx_paranoia_check(port, tty->name, "sx_hangup")) { + func_exit(); + return; + } + + bp = port_Board(port); + + sx_shutdown_port(bp, port); + spin_lock_irqsave(&port->lock, flags); + bp->count -= port->port.count; + if (bp->count < 0) { + printk(KERN_ERR + "sx%d: sx_hangup: bad board count: %d port: %d\n", + board_No(bp), bp->count, tty->index); + bp->count = 0; + } + port->port.count = 0; + port->port.flags &= ~ASYNC_NORMAL_ACTIVE; + port->port.tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&port->port.open_wait); + + func_exit(); +} + + +static void sx_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct specialix_port *port = tty->driver_data; + unsigned long flags; + struct specialix_board *bp; + + if (sx_paranoia_check(port, tty->name, "sx_set_termios")) + return; + + bp = port_Board(port); + spin_lock_irqsave(&port->lock, flags); + sx_change_speed(port_Board(port), port); + spin_unlock_irqrestore(&port->lock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + sx_start(tty); + } +} + +static const struct tty_operations sx_ops = { + .open = sx_open, + .close = sx_close, + .write = sx_write, + .put_char = sx_put_char, + .flush_chars = sx_flush_chars, + .write_room = sx_write_room, + .chars_in_buffer = sx_chars_in_buffer, + .flush_buffer = sx_flush_buffer, + .ioctl = sx_ioctl, + .throttle = sx_throttle, + .unthrottle = sx_unthrottle, + .set_termios = sx_set_termios, + .stop = sx_stop, + .start = sx_start, + .hangup = sx_hangup, + .tiocmget = sx_tiocmget, + .tiocmset = sx_tiocmset, + .break_ctl = sx_send_break, +}; + +static int sx_init_drivers(void) +{ + int error; + int i; + + func_enter(); + + specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT); + if (!specialix_driver) { + printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n"); + func_exit(); + return 1; + } + + specialix_driver->owner = THIS_MODULE; + specialix_driver->name = "ttyW"; + specialix_driver->major = SPECIALIX_NORMAL_MAJOR; + specialix_driver->type = TTY_DRIVER_TYPE_SERIAL; + specialix_driver->subtype = SERIAL_TYPE_NORMAL; + specialix_driver->init_termios = tty_std_termios; + specialix_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + specialix_driver->init_termios.c_ispeed = 9600; + specialix_driver->init_termios.c_ospeed = 9600; + specialix_driver->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_HARDWARE_BREAK; + tty_set_operations(specialix_driver, &sx_ops); + + error = tty_register_driver(specialix_driver); + if (error) { + put_tty_driver(specialix_driver); + printk(KERN_ERR + "sx: Couldn't register specialix IO8+ driver, error = %d\n", + error); + func_exit(); + return 1; + } + memset(sx_port, 0, sizeof(sx_port)); + for (i = 0; i < SX_NPORT * SX_NBOARD; i++) { + sx_port[i].magic = SPECIALIX_MAGIC; + tty_port_init(&sx_port[i].port); + spin_lock_init(&sx_port[i].lock); + } + + func_exit(); + return 0; +} + +static void sx_release_drivers(void) +{ + func_enter(); + + tty_unregister_driver(specialix_driver); + put_tty_driver(specialix_driver); + func_exit(); +} + +/* + * This routine must be called by kernel at boot time + */ +static int __init specialix_init(void) +{ + int i; + int found = 0; + + func_enter(); + + printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n"); + printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n"); + if (sx_rtscts) + printk(KERN_INFO + "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); + else + printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); + + for (i = 0; i < SX_NBOARD; i++) + spin_lock_init(&sx_board[i].lock); + + if (sx_init_drivers()) { + func_exit(); + return -EIO; + } + + for (i = 0; i < SX_NBOARD; i++) + if (sx_board[i].base && !sx_probe(&sx_board[i])) + found++; + +#ifdef CONFIG_PCI + { + struct pci_dev *pdev = NULL; + + i = 0; + while (i < SX_NBOARD) { + if (sx_board[i].flags & SX_BOARD_PRESENT) { + i++; + continue; + } + pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, + PCI_DEVICE_ID_SPECIALIX_IO8, pdev); + if (!pdev) + break; + + if (pci_enable_device(pdev)) + continue; + + sx_board[i].irq = pdev->irq; + + sx_board[i].base = pci_resource_start(pdev, 2); + + sx_board[i].flags |= SX_BOARD_IS_PCI; + if (!sx_probe(&sx_board[i])) + found++; + } + /* May exit pci_get sequence early with lots of boards */ + if (pdev != NULL) + pci_dev_put(pdev); + } +#endif + + if (!found) { + sx_release_drivers(); + printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n"); + func_exit(); + return -EIO; + } + + func_exit(); + return 0; +} + +static int iobase[SX_NBOARD] = {0,}; +static int irq[SX_NBOARD] = {0,}; + +module_param_array(iobase, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param(sx_debug, int, 0); +module_param(sx_rtscts, int, 0); +module_param(sx_rxfifo, int, 0); + +/* + * You can setup up to 4 boards. + * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter. + * You should specify the IRQs too in that case "irq=....,...". + * + * More than 4 boards in one computer is not possible, as the card can + * only use 4 different interrupts. + * + */ +static int __init specialix_init_module(void) +{ + int i; + + func_enter(); + + if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) { + for (i = 0; i < SX_NBOARD; i++) { + sx_board[i].base = iobase[i]; + sx_board[i].irq = irq[i]; + sx_board[i].count = 0; + } + } + + func_exit(); + + return specialix_init(); +} + +static void __exit specialix_exit_module(void) +{ + int i; + + func_enter(); + + sx_release_drivers(); + for (i = 0; i < SX_NBOARD; i++) + if (sx_board[i].flags & SX_BOARD_PRESENT) + sx_release_io_range(&sx_board[i]); + func_exit(); +} + +static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = { + { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) }, + { } +}; +MODULE_DEVICE_TABLE(pci, specialx_pci_tbl); + +module_init(specialix_init_module); +module_exit(specialix_exit_module); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR); |