diff options
author | Greg Kroah-Hartman <gregkh@suse.de> | 2011-02-22 16:57:21 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-02-22 16:57:21 -0800 |
commit | 4a6514e6d096716fb7bedf238efaaca877e2a7e8 (patch) | |
tree | e3601ee168cca90307ac91e750a86d6ed04eab01 /drivers/staging/tty/ip2/i2ellis.h | |
parent | 282361a046edd9d58a134f358a3f65a7cb8655d9 (diff) | |
download | op-kernel-dev-4a6514e6d096716fb7bedf238efaaca877e2a7e8.zip op-kernel-dev-4a6514e6d096716fb7bedf238efaaca877e2a7e8.tar.gz |
tty: move obsolete and broken tty drivers to drivers/staging/tty/
As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/tty/ directory where they will be removed after 2.6.41
if no one steps up to claim them.
epca
epca
ip2
istallion
riscom8
serial167
specialix
stallion
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/tty/ip2/i2ellis.h')
-rw-r--r-- | drivers/staging/tty/ip2/i2ellis.h | 566 |
1 files changed, 566 insertions, 0 deletions
diff --git a/drivers/staging/tty/ip2/i2ellis.h b/drivers/staging/tty/ip2/i2ellis.h new file mode 100644 index 0000000..fb6df24 --- /dev/null +++ b/drivers/staging/tty/ip2/i2ellis.h @@ -0,0 +1,566 @@ +/******************************************************************************* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Mainline code for the device driver +* +*******************************************************************************/ +//------------------------------------------------------------------------------ +// i2ellis.h +// +// IntelliPort-II and IntelliPort-IIEX +// +// Extremely +// Low +// Level +// Interface +// Services +// +// Structure Definitions and declarations for "ELLIS" service routines found in +// i2ellis.c +// +// These routines are based on properties of the IntelliPort-II and -IIEX +// hardware and bootstrap firmware, and are not sensitive to particular +// conventions of any particular loadware. +// +// Unlike i2hw.h, which provides IRONCLAD hardware definitions, the material +// here and in i2ellis.c is intended to provice a useful, but not required, +// layer of insulation from the hardware specifics. +//------------------------------------------------------------------------------ +#ifndef I2ELLIS_H /* To prevent multiple includes */ +#define I2ELLIS_H 1 +//------------------------------------------------ +// Revision History: +// +// 30 September 1991 MAG First Draft Started +// 12 October 1991 ...continued... +// +// 20 December 1996 AKM Linux version +//------------------------------------------------- + +//---------------------- +// Mandatory Includes: +//---------------------- +#include "ip2types.h" +#include "i2hw.h" // The hardware definitions + +//------------------------------------------ +// STAT_BOXIDS packets +//------------------------------------------ +#define MAX_BOX 4 + +typedef struct _bidStat +{ + unsigned char bid_value[MAX_BOX]; +} bidStat, *bidStatPtr; + +// This packet is sent in response to a CMD_GET_BOXIDS bypass command. For -IIEX +// boards, reports the hardware-specific "asynchronous resource register" on +// each expansion box. Boxes not present report 0xff. For -II boards, the first +// element contains 0x80 for 8-port, 0x40 for 4-port boards. + +// Box IDs aka ARR or Async Resource Register (more than you want to know) +// 7 6 5 4 3 2 1 0 +// F F N N L S S S +// ============================= +// F F - Product Family Designator +// =====+++++++++++++++++++++++++++++++ +// 0 0 - Intelliport II EX / ISA-8 +// 1 0 - IntelliServer +// 0 1 - SAC - Port Device (Intelliport III ??? ) +// =====+++++++++++++++++++++++++++++++++++++++ +// N N - Number of Ports +// 0 0 - 8 (eight) +// 0 1 - 4 (four) +// 1 0 - 12 (twelve) +// 1 1 - 16 (sixteen) +// =++++++++++++++++++++++++++++++++++ +// L - LCD Display Module Present +// 0 - No +// 1 - LCD module present +// =========+++++++++++++++++++++++++++++++++++++ +// S S S - Async Signals Supported Designator +// 0 0 0 - 8dss, Mod DCE DB25 Female +// 0 0 1 - 6dss, RJ-45 +// 0 1 0 - RS-232/422 dss, DB25 Female +// 0 1 1 - RS-232/422 dss, separate 232/422 DB25 Female +// 1 0 0 - 6dss, 921.6 I/F with ST654's +// 1 0 1 - RS-423/232 8dss, RJ-45 10Pin +// 1 1 0 - 6dss, Mod DCE DB25 Female +// 1 1 1 - NO BOX PRESENT + +#define FF(c) ((c & 0xC0) >> 6) +#define NN(c) ((c & 0x30) >> 4) +#define L(c) ((c & 0x08) >> 3) +#define SSS(c) (c & 0x07) + +#define BID_HAS_654(x) (SSS(x) == 0x04) +#define BID_NO_BOX 0xff /* no box */ +#define BID_8PORT 0x80 /* IP2-8 port */ +#define BID_4PORT 0x81 /* IP2-4 port */ +#define BID_EXP_MASK 0x30 /* IP2-EX */ +#define BID_EXP_8PORT 0x00 /* 8, */ +#define BID_EXP_4PORT 0x10 /* 4, */ +#define BID_EXP_UNDEF 0x20 /* UNDEF, */ +#define BID_EXP_16PORT 0x30 /* 16, */ +#define BID_LCD_CTRL 0x08 /* LCD Controller */ +#define BID_LCD_NONE 0x00 /* - no controller present */ +#define BID_LCD_PRES 0x08 /* - controller present */ +#define BID_CON_MASK 0x07 /* - connector pinouts */ +#define BID_CON_DB25 0x00 /* - DB-25 F */ +#define BID_CON_RJ45 0x01 /* - rj45 */ + +//------------------------------------------------------------------------------ +// i2eBordStr +// +// This structure contains all the information the ELLIS routines require in +// dealing with a particular board. +//------------------------------------------------------------------------------ +// There are some queues here which are guaranteed to never contain the entry +// for a single channel twice. So they must be slightly larger to allow +// unambiguous full/empty management +// +#define CH_QUEUE_SIZE ABS_MOST_PORTS+2 + +typedef struct _i2eBordStr +{ + porStr i2ePom; // Structure containing the power-on message. + + unsigned short i2ePomSize; + // The number of bytes actually read if + // different from sizeof i2ePom, indicates + // there is an error! + + unsigned short i2eStartMail; + // Contains whatever inbound mailbox data + // present at startup. NO_MAIL_HERE indicates + // nothing was present. No special + // significance as of this writing, but may be + // useful for diagnostic reasons. + + unsigned short i2eValid; + // Indicates validity of the structure; if + // i2eValid == I2E_MAGIC, then we can trust + // the other fields. Some (especially + // initialization) functions are good about + // checking for validity. Many functions do + // not, it being assumed that the larger + // context assures we are using a valid + // i2eBordStrPtr. + + unsigned short i2eError; + // Used for returning an error condition from + // several functions which use i2eBordStrPtr + // as an argument. + + // Accelerators to characterize separate features of a board, derived from a + // number of sources. + + unsigned short i2eFifoSize; + // Always, the size of the FIFO. For + // IntelliPort-II, always the same, for -IIEX + // taken from the Power-On reset message. + + volatile + unsigned short i2eFifoRemains; + // Used during normal operation to indicate a + // lower bound on the amount of data which + // might be in the outbound fifo. + + unsigned char i2eFifoStyle; + // Accelerator which tells which style (-II or + // -IIEX) FIFO we are using. + + unsigned char i2eDataWidth16; + // Accelerator which tells whether we should + // do 8 or 16-bit data transfers. + + unsigned char i2eMaxIrq; + // The highest allowable IRQ, based on the + // slot size. + + // Accelerators for various addresses on the board + int i2eBase; // I/O Address of the Board + int i2eData; // From here data transfers happen + int i2eStatus; // From here status reads happen + int i2ePointer; // (IntelliPort-II: pointer/commands) + int i2eXMail; // (IntelliPOrt-IIEX: mailboxes + int i2eXMask; // (IntelliPort-IIEX: mask write + + //------------------------------------------------------- + // Information presented in a common format across boards + // For each box, bit map of the channels present. Box closest to + // the host is box 0. LSB is channel 0. IntelliPort-II (non-expandable) + // is taken to be box 0. These are derived from product i.d. registers. + + unsigned short i2eChannelMap[ABS_MAX_BOXES]; + + // Same as above, except each is derived from firmware attempting to detect + // the uart presence (by reading a valid GFRCR register). If bits are set in + // i2eChannelMap and not in i2eGoodMap, there is a potential problem. + + unsigned short i2eGoodMap[ABS_MAX_BOXES]; + + // --------------------------- + // For indirect function calls + + // Routine to cause an N-millisecond delay: Patched by the ii2Initialize + // function. + + void (*i2eDelay)(unsigned int); + + // Routine to write N bytes to the board through the FIFO. Returns true if + // all copacetic, otherwise returns false and error is in i2eError field. + // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER. + + int (*i2eWriteBuf)(struct _i2eBordStr *, unsigned char *, int); + + // Routine to read N bytes from the board through the FIFO. Returns true if + // copacetic, otherwise returns false and error in i2eError. + // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER. + + int (*i2eReadBuf)(struct _i2eBordStr *, unsigned char *, int); + + // Returns a word from FIFO. Will use 2 byte operations if needed. + + unsigned short (*i2eReadWord)(struct _i2eBordStr *); + + // Writes a word to FIFO. Will use 2 byte operations if needed. + + void (*i2eWriteWord)(struct _i2eBordStr *, unsigned short); + + // Waits specified time for the Transmit FIFO to go empty. Returns true if + // ok, otherwise returns false and error in i2eError. + + int (*i2eWaitForTxEmpty)(struct _i2eBordStr *, int); + + // Returns true or false according to whether the outgoing mailbox is empty. + + int (*i2eTxMailEmpty)(struct _i2eBordStr *); + + // Checks whether outgoing mailbox is empty. If so, sends mail and returns + // true. Otherwise returns false. + + int (*i2eTrySendMail)(struct _i2eBordStr *, unsigned char); + + // If no mail available, returns NO_MAIL_HERE, else returns the value in the + // mailbox (guaranteed can't be NO_MAIL_HERE). + + unsigned short (*i2eGetMail)(struct _i2eBordStr *); + + // Enables the board to interrupt the host when it writes to the mailbox. + // Irqs will not occur, however, until the loadware separately enables + // interrupt generation to the host. The standard loadware does this in + // response to a command packet sent by the host. (Also, disables + // any other potential interrupt sources from the board -- other than the + // inbound mailbox). + + void (*i2eEnableMailIrq)(struct _i2eBordStr *); + + // Writes an arbitrary value to the mask register. + + void (*i2eWriteMask)(struct _i2eBordStr *, unsigned char); + + + // State information + + // During downloading, indicates the number of blocks remaining to download + // to the board. + + short i2eToLoad; + + // State of board (see manifests below) (e.g., whether in reset condition, + // whether standard loadware is installed, etc. + + unsigned char i2eState; + + // These three fields are only valid when there is loadware running on the + // board. (i2eState == II_STATE_LOADED or i2eState == II_STATE_STDLOADED ) + + unsigned char i2eLVersion; // Loadware version + unsigned char i2eLRevision; // Loadware revision + unsigned char i2eLSub; // Loadware subrevision + + // Flags which only have meaning in the context of the standard loadware. + // Somewhat violates the layering concept, but there is so little additional + // needed at the board level (while much additional at the channel level), + // that this beats maintaining two different per-board structures. + + // Indicates which IRQ the board has been initialized (from software) to use + // For MicroChannel boards, any value different from IRQ_UNDEFINED means + // that the software command has been sent to enable interrupts (or specify + // they are disabled). Special value: IRQ_UNDEFINED indicates that the + // software command to select the interrupt has not yet been sent, therefore + // (since the standard loadware insists that it be sent before any other + // packets are sent) no other packets should be sent yet. + + unsigned short i2eUsingIrq; + + // This is set when we hit the MB_OUT_STUFFED mailbox, which prevents us + // putting more in the mailbox until an appropriate mailbox message is + // received. + + unsigned char i2eWaitingForEmptyFifo; + + // Any mailbox bits waiting to be sent to the board are OR'ed in here. + + unsigned char i2eOutMailWaiting; + + // The head of any incoming packet is read into here, is then examined and + // we dispatch accordingly. + + unsigned short i2eLeadoffWord[1]; + + // Running counter of interrupts where the mailbox indicated incoming data. + + unsigned short i2eFifoInInts; + + // Running counter of interrupts where the mailbox indicated outgoing data + // had been stripped. + + unsigned short i2eFifoOutInts; + + // If not void, gives the address of a routine to call if fatal board error + // is found (only applies to standard l/w). + + void (*i2eFatalTrap)(struct _i2eBordStr *); + + // Will point to an array of some sort of channel structures (whose format + // is unknown at this level, being a function of what loadware is + // installed and the code configuration (max sizes of buffers, etc.)). + + void *i2eChannelPtr; + + // Set indicates that the board has gone fatal. + + unsigned short i2eFatal; + + // The number of elements pointed to by i2eChannelPtr. + + unsigned short i2eChannelCnt; + + // Ring-buffers of channel structures whose channels have particular needs. + + rwlock_t Fbuf_spinlock; + volatile + unsigned short i2Fbuf_strip; // Strip index + volatile + unsigned short i2Fbuf_stuff; // Stuff index + void *i2Fbuf[CH_QUEUE_SIZE]; // An array of channel pointers + // of channels who need to send + // flow control packets. + rwlock_t Dbuf_spinlock; + volatile + unsigned short i2Dbuf_strip; // Strip index + volatile + unsigned short i2Dbuf_stuff; // Stuff index + void *i2Dbuf[CH_QUEUE_SIZE]; // An array of channel pointers + // of channels who need to send + // data or in-line command packets. + rwlock_t Bbuf_spinlock; + volatile + unsigned short i2Bbuf_strip; // Strip index + volatile + unsigned short i2Bbuf_stuff; // Stuff index + void *i2Bbuf[CH_QUEUE_SIZE]; // An array of channel pointers + // of channels who need to send + // bypass command packets. + + /* + * A set of flags to indicate that certain events have occurred on at least + * one of the ports on this board. We use this to decide whether to spin + * through the channels looking for breaks, etc. + */ + int got_input; + int status_change; + bidStat channelBtypes; + + /* + * Debugging counters, etc. + */ + unsigned long debugFlowQueued; + unsigned long debugInlineQueued; + unsigned long debugDataQueued; + unsigned long debugBypassQueued; + unsigned long debugFlowCount; + unsigned long debugInlineCount; + unsigned long debugBypassCount; + + rwlock_t read_fifo_spinlock; + rwlock_t write_fifo_spinlock; + +// For queuing interrupt bottom half handlers. /\/\|=mhw=|\/\/ + struct work_struct tqueue_interrupt; + + struct timer_list SendPendingTimer; // Used by iiSendPending + unsigned int SendPendingRetry; +} i2eBordStr, *i2eBordStrPtr; + +//------------------------------------------------------------------- +// Macro Definitions for the indirect calls defined in the i2eBordStr +//------------------------------------------------------------------- +// +#define iiDelay(a,b) (*(a)->i2eDelay)(b) +#define iiWriteBuf(a,b,c) (*(a)->i2eWriteBuf)(a,b,c) +#define iiReadBuf(a,b,c) (*(a)->i2eReadBuf)(a,b,c) + +#define iiWriteWord(a,b) (*(a)->i2eWriteWord)(a,b) +#define iiReadWord(a) (*(a)->i2eReadWord)(a) + +#define iiWaitForTxEmpty(a,b) (*(a)->i2eWaitForTxEmpty)(a,b) + +#define iiTxMailEmpty(a) (*(a)->i2eTxMailEmpty)(a) +#define iiTrySendMail(a,b) (*(a)->i2eTrySendMail)(a,b) + +#define iiGetMail(a) (*(a)->i2eGetMail)(a) +#define iiEnableMailIrq(a) (*(a)->i2eEnableMailIrq)(a) +#define iiDisableMailIrq(a) (*(a)->i2eWriteMask)(a,0) +#define iiWriteMask(a,b) (*(a)->i2eWriteMask)(a,b) + +//------------------------------------------- +// Manifests for i2eBordStr: +//------------------------------------------- + +typedef void (*delayFunc_t)(unsigned int); + +// i2eValid +// +#define I2E_MAGIC 0x4251 // Structure is valid. +#define I2E_INCOMPLETE 0x1122 // Structure failed during init. + + +// i2eError +// +#define I2EE_GOOD 0 // Operation successful +#define I2EE_BADADDR 1 // Address out of range +#define I2EE_BADSTATE 2 // Attempt to perform a function when the board + // structure was in the incorrect state +#define I2EE_BADMAGIC 3 // Bad magic number from Power On test (i2ePomSize + // reflects what was read +#define I2EE_PORM_SHORT 4 // Power On message too short +#define I2EE_PORM_LONG 5 // Power On message too long +#define I2EE_BAD_FAMILY 6 // Un-supported board family type +#define I2EE_INCONSIST 7 // Firmware reports something impossible, + // e.g. unexpected number of ports... Almost no + // excuse other than bad FIFO... +#define I2EE_POSTERR 8 // Power-On self test reported a bad error +#define I2EE_BADBUS 9 // Unknown Bus type declared in message +#define I2EE_TXE_TIME 10 // Timed out waiting for TX Fifo to empty +#define I2EE_INVALID 11 // i2eValid field does not indicate a valid and + // complete board structure (for functions which + // require this be so.) +#define I2EE_BAD_PORT 12 // Discrepancy between channels actually found and + // what the product is supposed to have. Check + // i2eGoodMap vs i2eChannelMap for details. +#define I2EE_BAD_IRQ 13 // Someone specified an unsupported IRQ +#define I2EE_NOCHANNELS 14 // No channel structures have been defined (for + // functions requiring this). + +// i2eFifoStyle +// +#define FIFO_II 0 /* IntelliPort-II style: see also i2hw.h */ +#define FIFO_IIEX 1 /* IntelliPort-IIEX style */ + +// i2eGetMail +// +#define NO_MAIL_HERE 0x1111 // Since mail is unsigned char, cannot possibly + // promote to 0x1111. +// i2eState +// +#define II_STATE_COLD 0 // Addresses have been defined, but board not even + // reset yet. +#define II_STATE_RESET 1 // Board,if it exists, has just been reset +#define II_STATE_READY 2 // Board ready for its first block +#define II_STATE_LOADING 3 // Board continuing load +#define II_STATE_LOADED 4 // Board has finished load: status ok +#define II_STATE_BADLOAD 5 // Board has finished load: failed! +#define II_STATE_STDLOADED 6 // Board has finished load: standard firmware + +// i2eUsingIrq +// +#define I2_IRQ_UNDEFINED 0x1352 /* No valid irq (or polling = 0) can + * ever promote to this! */ +//------------------------------------------ +// Handy Macros for i2ellis.c and others +// Note these are common to -II and -IIEX +//------------------------------------------ + +// Given a pointer to the board structure, does the input FIFO have any data or +// not? +// +#define I2_HAS_INPUT(pB) !(inb(pB->i2eStatus) & ST_IN_EMPTY) + +// Given a pointer to the board structure, is there anything in the incoming +// mailbox? +// +#define I2_HAS_MAIL(pB) (inb(pB->i2eStatus) & ST_IN_MAIL) + +#define I2_UPDATE_FIFO_ROOM(pB) ((pB)->i2eFifoRemains = (pB)->i2eFifoSize) + +//------------------------------------------ +// Function Declarations for i2ellis.c +//------------------------------------------ +// +// Functions called directly +// +// Initialization of a board & structure is in four (five!) parts: +// +// 1) iiSetAddress() - Define the board address & delay function for a board. +// 2) iiReset() - Reset the board (provided it exists) +// -- Note you may do this to several boards -- +// 3) iiResetDelay() - Delay for 2 seconds (once for all boards) +// 4) iiInitialize() - Attempt to read Power-up message; further initialize +// accelerators +// +// Then you may use iiDownloadAll() or iiDownloadFile() (in i2file.c) to write +// loadware. To change loadware, you must begin again with step 2, resetting +// the board again (step 1 not needed). + +static int iiSetAddress(i2eBordStrPtr, int, delayFunc_t ); +static int iiReset(i2eBordStrPtr); +static int iiResetDelay(i2eBordStrPtr); +static int iiInitialize(i2eBordStrPtr); + +// Routine to validate that all channels expected are there. +// +extern int iiValidateChannels(i2eBordStrPtr); + +// Routine used to download a block of loadware. +// +static int iiDownloadBlock(i2eBordStrPtr, loadHdrStrPtr, int); + +// Return values given by iiDownloadBlock, iiDownloadAll, iiDownloadFile: +// +#define II_DOWN_BADVALID 0 // board structure is invalid +#define II_DOWN_CONTINUING 1 // So far, so good, firmware expects more +#define II_DOWN_GOOD 2 // Download complete, CRC good +#define II_DOWN_BAD 3 // Download complete, but CRC bad +#define II_DOWN_BADFILE 4 // Bad magic number in loadware file +#define II_DOWN_BADSTATE 5 // Board is in an inappropriate state for + // downloading loadware. (see i2eState) +#define II_DOWN_TIMEOUT 6 // Timeout waiting for firmware +#define II_DOWN_OVER 7 // Too much data +#define II_DOWN_UNDER 8 // Not enough data +#define II_DOWN_NOFILE 9 // Loadware file not found + +// Routine to download an entire loadware module: Return values are a subset of +// iiDownloadBlock's, excluding, of course, II_DOWN_CONTINUING +// +static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int); + +// Many functions defined here return True if good, False otherwise, with an +// error code in i2eError field. Here is a handy macro for setting the error +// code and returning. +// +#define I2_COMPLETE(pB,code) do { \ + pB->i2eError = code; \ + return (code == I2EE_GOOD);\ + } while (0) + +#endif // I2ELLIS_H |