V4L/DVB (12770): Add tm6000 driver to staging tree

Adds a driver for Trident TV Master tm5600/tm6000 chips.

Those USB devices are usually found with a Xceive xc2028/xc3028
tuner, although the firmware seems to be modified to work with
those chips on some older devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 76 insertions, 0 deletions

diff --git a/drivers/staging/tm6000/tm6000-regs.h b/drivers/staging/tm6000/tm6000-regs.h
new file mode 100644
index 0000000..414852e
--- /dev/null
+++ b/drivers/staging/tm6000/tm6000-regs.h
@@ -0,0 +1,76 @@
+/*
+   tm6000-regs.h - driver for TM5600/TM6000 USB video capture devices
+
+   Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation version 2
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Define TV Master TM5600/TM6000 Request codes
+ */
+#define REQ_00_SET_IR_VALUE		0
+#define REQ_01_SET_WAKEUP_IRCODE	1
+#define REQ_02_GET_IR_CODE		2
+#define REQ_03_SET_GET_MCU_PIN		3
+#define REQ_04_EN_DISABLE_MCU_INT	4
+#define REQ_05_SET_GET_USBREG		5
+	/* Write: RegNum, Value, 0 */
+	/* Read : RegNum, Value, 1, RegStatus */
+#define REQ_06_SET_GET_USBREG_BIT	6
+#define REQ_07_SET_GET_AVREG		7
+	/* Write: RegNum, Value, 0 */
+	/* Read : RegNum, Value, 1, RegStatus */
+#define REQ_08_SET_GET_AVREG_BIT	8
+#define REQ_09_SET_GET_TUNER_FQ		9
+#define REQ_10_SET_TUNER_SYSTEM		10
+#define REQ_11_SET_EEPROM_ADDR		11
+#define REQ_12_SET_GET_EEPROMBYTE	12
+#define REQ_13_GET_EEPROM_SEQREAD	13
+#define REQ_14_SET_GET_EEPROM_PAGE	14
+#define REQ_15_SET_GET_I2CBYTE		15
+	/* Write: Subaddr, Slave Addr, value, 0 */
+	/* Read : Subaddr, Slave Addr, value, 1 */
+#define REQ_16_SET_GET_I2CSEQ		16
+	/* Subaddr, Slave Addr, 0, length */
+#define REQ_17_SET_GET_I2CFP		17
+	/* Write: Slave Addr, register, value */
+	/* Read : Slave Addr, register, 2, data */
+
+/*
+ * Define TV Master TM5600/TM6000 GPIO lines
+ */
+
+#define TM6000_GPIO_CLK		0x101
+#define TM6000_GPIO_DATA	0x100
+#define TM6000_GPIO_1		0x102
+#define TM6000_GPIO_2		0x103
+#define TM6000_GPIO_3		0x104
+#define TM6000_GPIO_4		0x300
+#define TM6000_GPIO_5		0x301
+#define TM6000_GPIO_6		0x304
+#define TM6000_GPIO_7		0x305
+
+/*
+ * Define TV Master TM5600/TM6000 URB message codes and length
+ */
+
+#define TM6000_URB_MSG_LEN 180
+enum {
+	TM6000_URB_MSG_VIDEO=1,
+	TM6000_URB_MSG_AUDIO,
+	TM6000_URB_MSG_VBI,
+	TM6000_URB_MSG_PTS,
+	TM6000_URB_MSG_ERR,
+};