Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...

1 files changed, 0 insertions, 683 deletions

diff --git a/drivers/staging/rtl8723au/include/rtw_mlme_ext.h b/drivers/staging/rtl8723au/include/rtw_mlme_ext.h
deleted file mode 100644
index 0e7d3da9..0000000
--- a/drivers/staging/rtl8723au/include/rtw_mlme_ext.h
+++ /dev/null
@@ -1,683 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- ******************************************************************************/
-#ifndef __RTW_MLME_EXT_H_
-#define __RTW_MLME_EXT_H_
-
-#include <osdep_service.h>
-#include <drv_types.h>
-#include <wlan_bssdef.h>
-
-
-/*	Commented by Albert 20101105 */
-/*	Increase the SURVEY_TO value from 100 to 150  ( 100ms to 150ms ) */
-/*	The Realtek 8188CE SoftAP will spend around 100ms to send the probe response after receiving the probe request. */
-/*	So, this driver tried to extend the dwell time for each scanning channel. */
-/*	This will increase the chance to receive the probe response from SoftAP. */
-
-#define SURVEY_TO		(100)
-#define REAUTH_TO		(300) /* 50) */
-#define REASSOC_TO		(300) /* 50) */
-/* define DISCONNECT_TO	(3000) */
-#define ADDBA_TO			(2000)
-
-#define LINKED_TO (1) /* unit:2 sec, 1x2=2 sec */
-
-#define REAUTH_LIMIT	(4)
-#define REASSOC_LIMIT	(4)
-#define READDBA_LIMIT	(2)
-
-#define ROAMING_LIMIT	8
-
-#define	DYNAMIC_FUNC_DISABLE			(0x0)
-
-/*  ====== enum odm_ability ======== */
-/*  BB ODM section BIT 0-15 */
-#define	DYNAMIC_BB_DIG				BIT(0)
-#define	DYNAMIC_BB_RA_MASK			BIT(1)
-#define	DYNAMIC_BB_DYNAMIC_TXPWR	BIT(2)
-#define	DYNAMIC_BB_BB_FA_CNT			BIT(3)
-
-#define		DYNAMIC_BB_RSSI_MONITOR		BIT(4)
-#define		DYNAMIC_BB_CCK_PD			BIT(5)
-#define		DYNAMIC_BB_ANT_DIV			BIT(6)
-#define		DYNAMIC_BB_PWR_SAVE			BIT(7)
-#define		DYNAMIC_BB_PWR_TRAIN			BIT(8)
-#define		DYNAMIC_BB_RATE_ADAPTIVE		BIT(9)
-#define		DYNAMIC_BB_PATH_DIV			BIT(10)
-#define		DYNAMIC_BB_PSD				BIT(11)
-
-/*  MAC DM section BIT 16-23 */
-#define		DYNAMIC_MAC_struct edca_turboURBO		BIT(16)
-#define		DYNAMIC_MAC_EARLY_MODE		BIT(17)
-
-/*  RF ODM section BIT 24-31 */
-#define		DYNAMIC_RF_TX_PWR_TRACK		BIT(24)
-#define		DYNAMIC_RF_RX_GAIN_TRACK		BIT(25)
-#define		DYNAMIC_RF_CALIBRATION		BIT(26)
-
-#define		DYNAMIC_ALL_FUNC_ENABLE		0xFFFFFFF
-
-#define _HW_STATE_NOLINK_		0x00
-#define _HW_STATE_ADHOC_		0x01
-#define _HW_STATE_STATION_	0x02
-#define _HW_STATE_AP_			0x03
-
-
-#define		_1M_RATE_	0
-#define		_2M_RATE_	1
-#define		_5M_RATE_	2
-#define		_11M_RATE_	3
-#define		_6M_RATE_	4
-#define		_9M_RATE_	5
-#define		_12M_RATE_	6
-#define		_18M_RATE_	7
-#define		_24M_RATE_	8
-#define		_36M_RATE_	9
-#define		_48M_RATE_	10
-#define		_54M_RATE_	11
-
-
-extern unsigned char WMM_OUI23A[];
-extern unsigned char WPS_OUI23A[];
-extern unsigned char WFD_OUI23A[];
-extern unsigned char P2P_OUI23A[];
-
-extern unsigned char WMM_INFO_OUI23A[];
-extern unsigned char WMM_PARA_OUI23A[];
-
-
-/*  */
-/*  Channel Plan Type. */
-/*  Note: */
-/*	We just add new channel plan when the new channel plan is different from any of the following */
-/*	channel plan. */
-/*	If you just want to customize the actions(scan period or join actions) about one of the channel plan, */
-/*	customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
-/*  */
-enum  { /* _RT_CHANNEL_DOMAIN */
-	/*  old channel plan mapping ===== */
-	RT_CHANNEL_DOMAIN_FCC = 0x00,
-	RT_CHANNEL_DOMAIN_IC = 0x01,
-	RT_CHANNEL_DOMAIN_ETSI = 0x02,
-	RT_CHANNEL_DOMAIN_SPAIN = 0x03,
-	RT_CHANNEL_DOMAIN_FRANCE = 0x04,
-	RT_CHANNEL_DOMAIN_MKK = 0x05,
-	RT_CHANNEL_DOMAIN_MKK1 = 0x06,
-	RT_CHANNEL_DOMAIN_ISRAEL = 0x07,
-	RT_CHANNEL_DOMAIN_TELEC = 0x08,
-	RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 0x09,
-	RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 0x0A,
-	RT_CHANNEL_DOMAIN_TAIWAN = 0x0B,
-	RT_CHANNEL_DOMAIN_CHINA = 0x0C,
-	RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO = 0x0D,
-	RT_CHANNEL_DOMAIN_KOREA = 0x0E,
-	RT_CHANNEL_DOMAIN_TURKEY = 0x0F,
-	RT_CHANNEL_DOMAIN_JAPAN = 0x10,
-	RT_CHANNEL_DOMAIN_FCC_NO_DFS = 0x11,
-	RT_CHANNEL_DOMAIN_JAPAN_NO_DFS = 0x12,
-	RT_CHANNEL_DOMAIN_WORLD_WIDE_5G = 0x13,
-	RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS = 0x14,
-
-	/*  new channel plan mapping, (2GDOMAIN_5GDOMAIN) ===== */
-	RT_CHANNEL_DOMAIN_WORLD_NULL = 0x20,
-	RT_CHANNEL_DOMAIN_ETSI1_NULL = 0x21,
-	RT_CHANNEL_DOMAIN_FCC1_NULL = 0x22,
-	RT_CHANNEL_DOMAIN_MKK1_NULL = 0x23,
-	RT_CHANNEL_DOMAIN_ETSI2_NULL = 0x24,
-	RT_CHANNEL_DOMAIN_FCC1_FCC1 = 0x25,
-	RT_CHANNEL_DOMAIN_WORLD_ETSI1 = 0x26,
-	RT_CHANNEL_DOMAIN_MKK1_MKK1 = 0x27,
-	RT_CHANNEL_DOMAIN_WORLD_KCC1 = 0x28,
-	RT_CHANNEL_DOMAIN_WORLD_FCC2 = 0x29,
-	RT_CHANNEL_DOMAIN_WORLD_FCC3 = 0x30,
-	RT_CHANNEL_DOMAIN_WORLD_FCC4 = 0x31,
-	RT_CHANNEL_DOMAIN_WORLD_FCC5 = 0x32,
-	RT_CHANNEL_DOMAIN_WORLD_FCC6 = 0x33,
-	RT_CHANNEL_DOMAIN_FCC1_FCC7 = 0x34,
-	RT_CHANNEL_DOMAIN_WORLD_ETSI2 = 0x35,
-	RT_CHANNEL_DOMAIN_WORLD_ETSI3 = 0x36,
-	RT_CHANNEL_DOMAIN_MKK1_MKK2 = 0x37,
-	RT_CHANNEL_DOMAIN_MKK1_MKK3 = 0x38,
-	RT_CHANNEL_DOMAIN_FCC1_NCC1 = 0x39,
-	RT_CHANNEL_DOMAIN_FCC1_NCC2 = 0x40,
-	RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G = 0x41,
-	/*  Add new channel plan above this line=============== */
-	RT_CHANNEL_DOMAIN_MAX,
-	RT_CHANNEL_DOMAIN_REALTEK_DEFINE = 0x7F,
-};
-
-enum { /* _RT_CHANNEL_DOMAIN_2G */
-	RT_CHANNEL_DOMAIN_2G_WORLD = 0x00,		/* Worldwird 13 */
-	RT_CHANNEL_DOMAIN_2G_ETSI1 = 0x01,		/* Europe */
-	RT_CHANNEL_DOMAIN_2G_FCC1 = 0x02,		/* US */
-	RT_CHANNEL_DOMAIN_2G_MKK1 = 0x03,		/* Japan */
-	RT_CHANNEL_DOMAIN_2G_ETSI2 = 0x04,		/* France */
-	RT_CHANNEL_DOMAIN_2G_NULL = 0x05,
-	/*  Add new channel plan above this line=============== */
-	RT_CHANNEL_DOMAIN_2G_MAX,
-};
-
-enum { /* _RT_CHANNEL_DOMAIN_5G */
-	RT_CHANNEL_DOMAIN_5G_NULL = 0x00,
-	RT_CHANNEL_DOMAIN_5G_ETSI1 = 0x01,		/* Europe */
-	RT_CHANNEL_DOMAIN_5G_ETSI2 = 0x02,		/* Australia, New Zealand */
-	RT_CHANNEL_DOMAIN_5G_ETSI3 = 0x03,		/* Russia */
-	RT_CHANNEL_DOMAIN_5G_FCC1 = 0x04,		/* US */
-	RT_CHANNEL_DOMAIN_5G_FCC2 = 0x05,		/* FCC o/w DFS Channels */
-	RT_CHANNEL_DOMAIN_5G_FCC3 = 0x06,		/* India, Mexico */
-	RT_CHANNEL_DOMAIN_5G_FCC4 = 0x07,		/* Venezuela */
-	RT_CHANNEL_DOMAIN_5G_FCC5 = 0x08,		/* China */
-	RT_CHANNEL_DOMAIN_5G_FCC6 = 0x09,		/* Israel */
-	RT_CHANNEL_DOMAIN_5G_FCC7_IC1 = 0x0A,	/* US, Canada */
-	RT_CHANNEL_DOMAIN_5G_KCC1 = 0x0B,		/* Korea */
-	RT_CHANNEL_DOMAIN_5G_MKK1 = 0x0C,		/* Japan */
-	RT_CHANNEL_DOMAIN_5G_MKK2 = 0x0D,		/* Japan (W52, W53) */
-	RT_CHANNEL_DOMAIN_5G_MKK3 = 0x0E,		/* Japan (W56) */
-	RT_CHANNEL_DOMAIN_5G_NCC1 = 0x0F,		/* Taiwan */
-	RT_CHANNEL_DOMAIN_5G_NCC2 = 0x10,		/* Taiwan o/w DFS */
-	/*  Add new channel plan above this line=============== */
-	/*  Driver Self Defined ===== */
-	RT_CHANNEL_DOMAIN_5G_FCC = 0x11,
-	RT_CHANNEL_DOMAIN_5G_JAPAN_NO_DFS = 0x12,
-	RT_CHANNEL_DOMAIN_5G_FCC4_NO_DFS = 0x13,
-	RT_CHANNEL_DOMAIN_5G_MAX,
-};
-
-#define rtw_is_channel_plan_valid(chplan) (chplan<RT_CHANNEL_DOMAIN_MAX || chplan == RT_CHANNEL_DOMAIN_REALTEK_DEFINE)
-
-struct rt_channel_plan {
-	unsigned char	Channel[MAX_CHANNEL_NUM];
-	unsigned char	Len;
-};
-
-struct rt_channel_plan_2g {
-	unsigned char	Channel[MAX_CHANNEL_NUM_2G];
-	unsigned char	Len;
-};
-
-struct rt_channel_plan_5g {
-	unsigned char	Channel[MAX_CHANNEL_NUM_5G];
-	unsigned char	Len;
-};
-
-struct rt_channel_plan_map {
-	unsigned char	Index2G;
-	unsigned char	Index5G;
-};
-
-enum Associated_AP {
-	atherosAP	= 0,
-	broadcomAP	= 1,
-	ciscoAP		= 2,
-	marvellAP	= 3,
-	ralinkAP	= 4,
-	realtekAP	= 5,
-	airgocapAP	= 6,
-	unknownAP	= 7,
-	maxAP,
-};
-
-enum { /* HT_IOT_PEER_E */
-	HT_IOT_PEER_UNKNOWN		= 0,
-	HT_IOT_PEER_REALTEK		= 1,
-	HT_IOT_PEER_REALTEK_92SE	= 2,
-	HT_IOT_PEER_BROADCOM		= 3,
-	HT_IOT_PEER_RALINK		= 4,
-	HT_IOT_PEER_ATHEROS		= 5,
-	HT_IOT_PEER_CISCO		= 6,
-	HT_IOT_PEER_MERU		= 7,
-	HT_IOT_PEER_MARVELL		= 8,
-	HT_IOT_PEER_REALTEK_SOFTAP	= 9,/*  peer is RealTek SOFT_AP, by Bohn, 2009.12.17 */
-	HT_IOT_PEER_SELF_SOFTAP		= 10, /*  Self is SoftAP */
-	HT_IOT_PEER_AIRGO		= 11,
-	HT_IOT_PEER_INTEL		= 12,
-	HT_IOT_PEER_RTK_APCLIENT	= 13,
-	HT_IOT_PEER_REALTEK_81XX	= 14,
-	HT_IOT_PEER_REALTEK_WOW		= 15,
-	HT_IOT_PEER_TENDA		= 16,
-	HT_IOT_PEER_MAX			= 17
-};
-
-enum SCAN_STATE {
-	SCAN_DISABLE = 0,
-	SCAN_START = 1,
-	SCAN_TXNULL = 2,
-	SCAN_PROCESS = 3,
-	SCAN_COMPLETE = 4,
-	SCAN_STATE_MAX,
-};
-
-struct mlme_handler {
-	char *str;
-	int (*func)(struct rtw_adapter *padapter, struct recv_frame *precv_frame);
-};
-
-struct action_handler {
-	unsigned int   num;
-	char *str;
-	int (*func)(struct rtw_adapter *padapter, struct recv_frame *precv_frame);
-};
-
-struct	ss_res {
-	int	state;
-	int	bss_cnt;
-	int	channel_idx;
-	int	scan_mode;
-	u8 ssid_num;
-	u8 ch_num;
-	struct cfg80211_ssid ssid[RTW_SSID_SCAN_AMOUNT];
-	struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
-};
-
-#define	WIFI_FW_AUTH_NULL			0x00000100
-#define	WIFI_FW_AUTH_STATE			0x00000200
-#define	WIFI_FW_AUTH_SUCCESS			0x00000400
-
-#define	WIFI_FW_ASSOC_STATE			0x00002000
-#define	WIFI_FW_ASSOC_SUCCESS		0x00004000
-
-#define	WIFI_FW_LINKING_STATE		(WIFI_FW_AUTH_NULL | WIFI_FW_AUTH_STATE | WIFI_FW_AUTH_SUCCESS |WIFI_FW_ASSOC_STATE)
-
-struct FW_Sta_Info {
-	struct sta_info	*psta;
-	u32	status;
-	u32	rx_pkt;
-	u32	retry;
-	unsigned char SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
-};
-
-/*
- * Usage:
- * When one iface acted as AP mode and the other iface is STA mode and scanning,
- * it should switch back to AP's operating channel periodically.
- * Parameters info:
- * When the driver scanned RTW_SCAN_NUM_OF_CH channels, it would switch back to AP's operating channel for
- * RTW_STAY_AP_CH_MILLISECOND * SURVEY_TO milliseconds.
- * Example:
- * For chip supports 2.4G + 5GHz and AP mode is operating in channel 1,
- * RTW_SCAN_NUM_OF_CH is 8, RTW_STAY_AP_CH_MILLISECOND is 3 and SURVEY_TO is 100.
- * When it's STA mode gets set_scan command,
- * it would
- * 1. Doing the scan on channel 1.2.3.4.5.6.7.8
- * 2. Back to channel 1 for 300 milliseconds
- * 3. Go through doing site survey on channel 9.10.11.36.40.44.48.52
- * 4. Back to channel 1 for 300 milliseconds
- * 5. ... and so on, till survey done.
- */
-
-struct mlme_ext_info {
-	u32	state;
-	u32	reauth_count;
-	u32	reassoc_count;
-	u32	link_count;
-	u32	auth_seq;
-	u32	auth_algo;	/*  802.11 auth, could be open, shared, auto */
-	u32	authModeToggle;
-	u32	enc_algo;/* encrypt algorithm; */
-	u32	key_index;	/*  this is only valid for legendary wep, 0~3 for key id. */
-	u32	iv;
-	u8	chg_txt[128];
-	u16	aid;
-	u16	bcn_interval;
-	u16	capability;
-	u8	assoc_AP_vendor;
-	u8	slotTime;
-	u8	preamble_mode;
-	u8	WMM_enable;
-	u8	ERP_enable;
-	u8	ERP_IE;
-	u8	HT_enable;
-	u8	HT_caps_enable;
-	u8	HT_info_enable;
-	u8	HT_protection;
-	u8	turboMode_cts2self;
-	u8	turboMode_rtsen;
-	u8	SM_PS;
-	u8	ADDBA_retry_count;
-	u8	dialogToken;
-	/*  Accept ADDBA Request */
-	bool bAcceptAddbaReq;
-	u8	bwmode_updated;
-	u8	hidden_ssid_mode;
-
-	struct ADDBA_request		ADDBA_req;
-	struct WMM_para_element	WMM_param;
-	struct ieee80211_ht_cap ht_cap;
-	struct ieee80211_ht_operation HT_info;
-	struct wlan_bssid_ex			network;/* join network or bss_network, if in ap mode, it is the same to cur_network.network */
-	struct FW_Sta_Info		FW_sta_info[NUM_STA];
-};
-
-/*  The channel information about this channel including joining, scanning, and power constraints. */
-struct rt_channel_info {
-	u8		ChannelNum;		/*  The channel number. */
-	enum rt_scan_type ScanType;		/*  Scan type such as passive or active scan. */
-};
-
-int rtw_ch_set_search_ch23a(struct rt_channel_info *ch_set, const u32 ch);
-
-/*  P2P_MAX_REG_CLASSES - Maximum number of regulatory classes */
-#define P2P_MAX_REG_CLASSES 10
-
-/*  P2P_MAX_REG_CLASS_CHANNELS - Maximum number of channels per regulatory class */
-#define P2P_MAX_REG_CLASS_CHANNELS 20
-
-/*   struct p2p_channels - List of supported channels */
-struct p2p_channels {
-	/*  struct p2p_reg_class - Supported regulatory class */
-	struct p2p_reg_class {
-		/*  reg_class - Regulatory class (IEEE 802.11-2007, Annex J) */
-		u8 reg_class;
-
-		/*  channel - Supported channels */
-		u8 channel[P2P_MAX_REG_CLASS_CHANNELS];
-
-		/*  channels - Number of channel entries in use */
-		size_t channels;
-	} reg_class[P2P_MAX_REG_CLASSES];
-
-	/*  reg_classes - Number of reg_class entries in use */
-	size_t reg_classes;
-};
-
-struct p2p_oper_class_map {
-	enum hw_mode {IEEE80211G, IEEE80211A} mode;
-	u8 op_class;
-	u8 min_chan;
-	u8 max_chan;
-	u8 inc;
-	enum {
-		BW20, BW40PLUS, BW40MINUS
-	} bw;
-};
-
-struct mlme_ext_priv {
-	struct rtw_adapter	*padapter;
-	u8	mlmeext_init;
-	atomic_t		event_seq;
-	u16	mgnt_seq;
-
-	/* struct fw_priv	fwpriv; */
-
-	unsigned char	cur_channel;
-	unsigned char	cur_bwmode;
-	unsigned char	cur_ch_offset;/* PRIME_CHNL_OFFSET */
-	unsigned char	cur_wireless_mode;	/*  NETWORK_TYPE */
-
-	unsigned char	max_chan_nums;
-	struct rt_channel_info		channel_set[MAX_CHANNEL_NUM];
-	struct p2p_channels channel_list;
-	unsigned char	basicrate[NumRates];
-	unsigned char	datarate[NumRates];
-
-	struct ss_res		sitesurvey_res;
-	struct mlme_ext_info	mlmext_info;/* for sta/adhoc mode, including current scanning/connecting/connected related info. */
-                                                     /* for ap mode, network includes ap's cap_info */
-	struct timer_list		survey_timer;
-	struct timer_list		link_timer;
-	u16			chan_scan_time;
-
-	u8	scan_abort;
-	u8	tx_rate; /*  TXRATE when USERATE is set. */
-
-	u32	retry; /* retry for issue probereq */
-
-	u64 TSFValue;
-
-	unsigned char bstart_bss;
-	u8 update_channel_plan_by_ap_done;
-	/* recv_decache check for Action_public frame */
-	u8 action_public_dialog_token;
-	u16	 action_public_rxseq;
-	u8 active_keep_alive_check;
-};
-
-int init_mlme_ext_priv23a(struct rtw_adapter *padapter);
-int init_hw_mlme_ext23a(struct rtw_adapter *padapter);
-void free_mlme_ext_priv23a (struct mlme_ext_priv *pmlmeext);
-void init_mlme_ext_timer23a(struct rtw_adapter *padapter);
-void init_addba_retry_timer23a(struct sta_info *psta);
-struct xmit_frame *alloc_mgtxmitframe23a(struct xmit_priv *pxmitpriv);
-
-unsigned char networktype_to_raid23a(unsigned char network_type);
-u8 judge_network_type23a(struct rtw_adapter *padapter, unsigned char *rate,
-		      int ratelen);
-void get_rate_set23a(struct rtw_adapter *padapter, unsigned char *pbssrate,
-		  int *bssrate_len);
-void UpdateBrateTbl23a(struct rtw_adapter *padapter, u8 *mBratesOS);
-void Update23aTblForSoftAP(u8 *bssrateset, u32 bssratelen);
-
-u8 rtw_get_oper_ch23a(struct rtw_adapter *adapter);
-void rtw_set_oper_ch23a(struct rtw_adapter *adapter, u8 ch);
-void rtw_set_oper_bw23a(struct rtw_adapter *adapter, u8 bw);
-void rtw_set_oper_ch23aoffset23a(struct rtw_adapter *adapter, u8 offset);
-
-void set_channel_bwmode23a(struct rtw_adapter *padapter, unsigned char channel,
-			unsigned char channel_offset, unsigned short bwmode);
-void SelectChannel23a(struct rtw_adapter *padapter, unsigned char channel);
-
-unsigned int decide_wait_for_beacon_timeout23a(unsigned int bcn_interval);
-
-void clear_cam_entry23a(struct rtw_adapter *padapter, u8 entry);
-
-void invalidate_cam_all23a(struct rtw_adapter *padapter);
-
-int allocate_fw_sta_entry23a(struct rtw_adapter *padapter);
-void flush_all_cam_entry23a(struct rtw_adapter *padapter);
-
-bool IsLegal5GChannel(struct rtw_adapter *Adapter, u8 channel);
-
-void update_network23a(struct wlan_bssid_ex *dst, struct wlan_bssid_ex *src,
-		    struct rtw_adapter *padapter, bool update_ie);
-
-u8 *get_my_bssid23a(struct wlan_bssid_ex *pnetwork);
-
-bool is_client_associated_to_ap23a(struct rtw_adapter *padapter);
-bool is_client_associated_to_ibss23a(struct rtw_adapter *padapter);
-bool is_IBSS_empty23a(struct rtw_adapter *padapter);
-
-unsigned char check_assoc_AP23a(u8 *pframe, uint len);
-
-int WMM_param_handler23a(struct rtw_adapter *padapter, const u8 *p);
-void WMMOnAssocRsp23a(struct rtw_adapter *padapter);
-
-void HT_caps_handler23a(struct rtw_adapter *padapter, const u8 *p);
-void HT_info_handler23a(struct rtw_adapter *padapter, const u8 *p);
-void HTOnAssocRsp23a(struct rtw_adapter *padapter);
-
-void ERP_IE_handler23a(struct rtw_adapter *padapter, const u8 *p);
-void VCS_update23a(struct rtw_adapter *padapter, struct sta_info *psta);
-
-void update_beacon23a_info(struct rtw_adapter *padapter,
-			   struct ieee80211_mgmt *mgmt, uint len,
-			   struct sta_info *psta);
-int rtw_check_bcn_info23a(struct rtw_adapter *Adapter,
-			  struct ieee80211_mgmt *mgmt, u32 packet_len);
-void update_IOT_info23a(struct rtw_adapter *padapter);
-void update_capinfo23a(struct rtw_adapter *Adapter, u16 updateCap);
-void update_wireless_mode23a(struct rtw_adapter *padapter);
-void update_tx_basic_rate23a(struct rtw_adapter *padapter, u8 modulation);
-void update_bmc_sta_support_rate23a(struct rtw_adapter *padapter, u32 mac_id);
-int update_sta_support_rate23a(struct rtw_adapter *padapter, u8 *pvar_ie,
-			    uint var_ie_len, int cam_idx);
-
-/* for sta/adhoc mode */
-void update_sta_info23a(struct rtw_adapter *padapter, struct sta_info *psta);
-unsigned int update_basic_rate23a(unsigned char *ptn, unsigned int ptn_sz);
-unsigned int update_supported_rate23a(unsigned char *ptn, unsigned int ptn_sz);
-unsigned int update_MSC_rate23a(struct ieee80211_ht_cap *ht_cap);
-void Update_RA_Entry23a(struct rtw_adapter *padapter, struct sta_info *psta);
-void set_sta_rate23a(struct rtw_adapter *padapter, struct sta_info *psta);
-
-int receive_disconnect23a(struct rtw_adapter *padapter,
-			  unsigned char *MacAddr, unsigned short reason);
-
-unsigned char get_highest_rate_idx23a(u32 mask);
-int support_short_GI23a(struct rtw_adapter *padapter,
-			struct ieee80211_ht_cap *ht_cap);
-bool is_ap_in_tkip23a(struct rtw_adapter *padapter);
-bool is_ap_in_wep23a(struct rtw_adapter *padapter);
-bool should_forbid_n_rate23a(struct rtw_adapter *padapter);
-
-void report_join_res23a(struct rtw_adapter *padapter, int res);
-void report_survey_event23a(struct rtw_adapter *padapter,
-			 struct recv_frame *precv_frame);
-void report_surveydone_event23a(struct rtw_adapter *padapter);
-void report_del_sta_event23a(struct rtw_adapter *padapter,
-			  unsigned char *MacAddr, unsigned short reason);
-void report_add_sta_event23a(struct rtw_adapter *padapter,
-			  unsigned char *MacAddr, int cam_idx);
-
-int set_tx_beacon_cmd23a(struct rtw_adapter*padapter);
-unsigned int setup_beacon_frame(struct rtw_adapter *padapter,
-				unsigned char *beacon_frame);
-void update_mgnt_tx_rate23a(struct rtw_adapter *padapter, u8 rate);
-void update_mgntframe_attrib23a(struct rtw_adapter *padapter,
-			     struct pkt_attrib *pattrib);
-void dump_mgntframe23a(struct rtw_adapter *padapter,
-		    struct xmit_frame *pmgntframe);
-s32 dump_mgntframe23a_and_wait(struct rtw_adapter *padapter,
-			    struct xmit_frame *pmgntframe, int timeout_ms);
-s32 dump_mgntframe23a_and_wait_ack23a(struct rtw_adapter *padapter,
-				struct xmit_frame *pmgntframe);
-
-void issue_beacon23a(struct rtw_adapter *padapter, int timeout_ms);
-int issue_nulldata23a(struct rtw_adapter *padapter, unsigned char *da,
-		   unsigned int power_mode, int try_cnt, int wait_ms);
-int issue_qos_nulldata23a(struct rtw_adapter *padapter, unsigned char *da, u16 tid,
-		       int try_cnt, int wait_ms);
-int issue_deauth23a(struct rtw_adapter *padapter, unsigned char *da,
-		 unsigned short reason);
-void issue_action_spct_ch_switch23a(struct rtw_adapter *padapter, u8 *ra,
-				 u8 new_ch, u8 ch_offset);
-void issue_action_BA23a(struct rtw_adapter *padapter,
-			const unsigned char *raddr,
-			unsigned char action, unsigned short status);
-int send_delba23a(struct rtw_adapter *padapter, u8 initiator, u8 *addr);
-int send_beacon23a(struct rtw_adapter *padapter);
-
-void mlmeext_joinbss_event_callback23a(struct rtw_adapter *padapter, int join_res);
-void mlmeext_sta_del_event_callback23a(struct rtw_adapter *padapter);
-void mlmeext_sta_add_event_callback23a(struct rtw_adapter *padapter, struct sta_info *psta);
-
-void linked_status_chk23a(struct rtw_adapter *padapter);
-
-#define set_survey_timer(mlmeext, ms) \
-	/*DBG_8723A("%s set_survey_timer(%p, %d)\n", __func__, (mlmeext), (ms));*/ \
-	mod_timer(&mlmeext->survey_timer, jiffies + msecs_to_jiffies(ms));
-
-#define set_link_timer(mlmeext, ms) \
-	/*DBG_8723A("%s set_link_timer(%p, %d)\n", __func__, (mlmeext), (ms));*/ \
-	mod_timer(&mlmeext->link_timer, jiffies + msecs_to_jiffies(ms));
-
-int cckrates_included23a(unsigned char *rate, int ratelen);
-int cckratesonly_included23a(unsigned char *rate, int ratelen);
-
-void process_addba_req23a(struct rtw_adapter *padapter, u8 *paddba_req, u8 *addr);
-
-void correct_TSF23a(struct rtw_adapter *padapter, struct mlme_ext_priv *pmlmeext);
-
-struct cmd_hdl {
-	uint	parmsize;
-	int (*h2cfuns)(struct rtw_adapter *padapter, const u8 *pbuf);
-};
-
-
-int read_macreg_hdl(struct rtw_adapter *padapter, u8 *pbuf);
-int write_macreg_hdl(struct rtw_adapter *padapter, u8 *pbuf);
-int read_bbreg_hdl(struct rtw_adapter *padapter, u8 *pbuf);
-int write_bbreg_hdl(struct rtw_adapter *padapter, u8 *pbuf);
-int read_rfreg_hdl(struct rtw_adapter *padapter, u8 *pbuf);
-int write_rfreg_hdl(struct rtw_adapter *padapter, u8 *pbuf);
-
-
-int NULL_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int join_cmd_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int disconnect_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int createbss_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int setopmode_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int sitesurvey_cmd_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int setauth_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int setkey_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int set_stakey_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int set_assocsta_hdl(struct rtw_adapter *padapter, const u8 *pbuf);
-int del_assocsta_hdl(struct rtw_adapter *padapter, const u8 *pbuf);
-int add_ba_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-
-int mlme_evt_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int h2c_msg_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int tx_beacon_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int set_ch_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int set_chplan_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int led_blink_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-int set_csa_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);	/* Kurt: Handling DFS channel switch announcement ie. */
-int tdls_hdl23a(struct rtw_adapter *padapter, const u8 *pbuf);
-
-#define GEN_DRV_CMD_HANDLER(size, cmd)	{size, &cmd ## _hdl23a},
-#define GEN_MLME_EXT_HANDLER(size, cmd)	{size, cmd},
-
-struct C2HEvent_Header {
-#ifdef __LITTLE_ENDIAN
-
-	unsigned int len:16;
-	unsigned int ID:8;
-	unsigned int seq:8;
-
-#elif defined(__BIG_ENDIAN)
-
-	unsigned int seq:8;
-	unsigned int ID:8;
-	unsigned int len:16;
-
-#else
-
-#  error "Must be LITTLE or BIG Endian"
-
-#endif
-
-	unsigned int rsvd;
-};
-
-enum rtw_c2h_event {
-	GEN_EVT_CODE(_Read_MACREG) = 0, /*0*/
-	GEN_EVT_CODE(_Read_BBREG),
-	GEN_EVT_CODE(_Read_RFREG),
-	GEN_EVT_CODE(_Read_EEPROM),
-	GEN_EVT_CODE(_Read_EFUSE),
-	GEN_EVT_CODE(_Read_CAM),			/*5*/
-	GEN_EVT_CODE(_Get_BasicRate),
-	GEN_EVT_CODE(_Get_DataRate),
-	GEN_EVT_CODE(_Survey),	 /*8*/
-	GEN_EVT_CODE(_SurveyDone),	 /*9*/
-
-	GEN_EVT_CODE(_JoinBss) , /*10*/
-	GEN_EVT_CODE(_AddSTA),
-	GEN_EVT_CODE(_DelSTA),
-	GEN_EVT_CODE(_AtimDone) ,
-	GEN_EVT_CODE(_TX_Report),
-	GEN_EVT_CODE(_CCX_Report),			/*15*/
-	GEN_EVT_CODE(_DTM_Report),
-	GEN_EVT_CODE(_TX_Rate_Statistics),
-	GEN_EVT_CODE(_C2HLBK),
-	GEN_EVT_CODE(_FWDBG),
-	GEN_EVT_CODE(_C2HFEEDBACK),               /*20*/
-	GEN_EVT_CODE(_ADDBA),
-	GEN_EVT_CODE(_C2HBCN),
-	GEN_EVT_CODE(_ReportPwrState),		/* filen: only for PCIE, USB */
-	GEN_EVT_CODE(_CloseRF),				/* filen: only for PCIE, work around ASPM */
-	MAX_C2HEVT
-};
-
-#endif