Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...

1 files changed, 0 insertions, 538 deletions

diff --git a/drivers/staging/rtl8723au/include/rtl8723a_hal.h b/drivers/staging/rtl8723au/include/rtl8723a_hal.h
deleted file mode 100644
index 77a0fd4..0000000
--- a/drivers/staging/rtl8723au/include/rtl8723a_hal.h
+++ /dev/null
@@ -1,538 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- ******************************************************************************/
-#ifndef __RTL8723A_HAL_H__
-#define __RTL8723A_HAL_H__
-
-#include "rtl8723a_spec.h"
-#include "rtl8723a_pg.h"
-#include "Hal8723APhyReg.h"
-#include "Hal8723APhyCfg.h"
-#include "rtl8723a_rf.h"
-#include "rtl8723a_bt_intf.h"
-#ifdef CONFIG_8723AU_BT_COEXIST
-#include "rtl8723a_bt-coexist.h"
-#endif
-#include "rtl8723a_dm.h"
-#include "rtl8723a_recv.h"
-#include "rtl8723a_xmit.h"
-#include "rtl8723a_cmd.h"
-#include "rtl8723a_sreset.h"
-#include "rtw_efuse.h"
-#include "rtw_eeprom.h"
-
-#include "odm_precomp.h"
-#include "odm.h"
-
-
-/* 2TODO: We should define 8192S firmware related macro settings here!! */
-#define RTL819X_DEFAULT_RF_TYPE			RF_1T2R
-#define RTL819X_TOTAL_RF_PATH				2
-
-/*  */
-/*		RTL8723S From header */
-/*  */
-
-/*  Fw Array */
-#define Rtl8723_FwImageArray				Rtl8723UFwImgArray
-#define Rtl8723_FwUMCBCutImageArrayWithBT		Rtl8723UFwUMCBCutImgArrayWithBT
-#define Rtl8723_FwUMCBCutImageArrayWithoutBT	Rtl8723UFwUMCBCutImgArrayWithoutBT
-
-#define Rtl8723_ImgArrayLength				Rtl8723UImgArrayLength
-#define Rtl8723_UMCBCutImgArrayWithBTLength		Rtl8723UUMCBCutImgArrayWithBTLength
-#define Rtl8723_UMCBCutImgArrayWithoutBTLength	Rtl8723UUMCBCutImgArrayWithoutBTLength
-
-#define Rtl8723_PHY_REG_Array_PG			Rtl8723UPHY_REG_Array_PG
-#define Rtl8723_PHY_REG_Array_PGLength		Rtl8723UPHY_REG_Array_PGLength
-
-#define Rtl8723_FwUMCBCutMPImageArray		Rtl8723SFwUMCBCutMPImgAr
-#define Rtl8723_UMCBCutMPImgArrayLength		Rtl8723SUMCBCutMPImgArrayLength
-
-#define DRVINFO_SZ				4 /*  unit is 8bytes */
-#define PageNum_128(_Len)		(u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0))
-
-#define FW_8723A_SIZE			0x8000
-#define FW_8723A_START_ADDRESS	0x1000
-#define FW_8723A_END_ADDRESS		0x1FFF /* 0x5FFF */
-
-#define MAX_PAGE_SIZE			4096	/*  @ page : 4k bytes */
-
-#define IS_FW_HEADER_EXIST(_pFwHdr)	((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\
-									(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\
-									(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300)
-
-/*  */
-/*  This structure must be cared byte-ordering */
-/*  */
-/*  Added by tynli. 2009.12.04. */
-struct rt_8723a_firmware_hdr {
-	/*  8-byte alinment required */
-
-	/*  LONG WORD 0 ---- */
-	__le16		Signature;  /*
-				     * 92C0: test chip; 92C, 88C0: test chip;
-				     * 88C1: MP A-cut; 92C1: MP A-cut
-				     */
-	u8		Category;	/*  AP/NIC and USB/PCI */
-	u8		Function;	/*  Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
-	__le16		Version;		/*  FW Version */
-	u8		Subversion;	/*  FW Subversion, default 0x00 */
-	u8		Rsvd1;
-
-
-	/*  LONG WORD 1 ---- */
-	u8		Month;	/*  Release time Month field */
-	u8		Date;	/*  Release time Date field */
-	u8		Hour;	/*  Release time Hour field */
-	u8		Minute;	/*  Release time Minute field */
-	__le16		RamCodeSize;	/*  The size of RAM code */
-	__le16		Rsvd2;
-
-	/*  LONG WORD 2 ---- */
-	__le32		SvnIdx;	/*  The SVN entry index */
-	__le32		Rsvd3;
-
-	/*  LONG WORD 3 ---- */
-	__le32		Rsvd4;
-	__le32		Rsvd5;
-};
-
-#define DRIVER_EARLY_INT_TIME		0x05
-#define BCN_DMA_ATIME_INT_TIME		0x02
-
-
-/*  BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */
-#define MAX_TX_QUEUE		9
-
-#define TX_SELE_HQ			BIT(0)		/*  High Queue */
-#define TX_SELE_LQ			BIT(1)		/*  Low Queue */
-#define TX_SELE_NQ			BIT(2)		/*  Normal Queue */
-
-/*  Note: We will divide number of page equally for each queue other than public queue! */
-#define TX_TOTAL_PAGE_NUMBER	0xF8
-#define TX_PAGE_BOUNDARY		(TX_TOTAL_PAGE_NUMBER + 1)
-
-/*  For Normal Chip Setting */
-/*  (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER */
-#define NORMAL_PAGE_NUM_PUBQ	0xE7
-#define NORMAL_PAGE_NUM_HPQ		0x0C
-#define NORMAL_PAGE_NUM_LPQ		0x02
-#define NORMAL_PAGE_NUM_NPQ		0x02
-
-/*  For Test Chip Setting */
-/*  (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER */
-#define TEST_PAGE_NUM_PUBQ		0x7E
-
-/*  For Test Chip Setting */
-#define WMM_TEST_TX_TOTAL_PAGE_NUMBER	0xF5
-#define WMM_TEST_TX_PAGE_BOUNDARY		(WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) /* F6 */
-
-#define WMM_TEST_PAGE_NUM_PUBQ		0xA3
-#define WMM_TEST_PAGE_NUM_HPQ		0x29
-#define WMM_TEST_PAGE_NUM_LPQ		0x29
-
-/*  Note: For Normal Chip Setting, modify later */
-#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER	0xF5
-#define WMM_NORMAL_TX_PAGE_BOUNDARY		(WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) /* F6 */
-
-#define WMM_NORMAL_PAGE_NUM_PUBQ	0xB0
-#define WMM_NORMAL_PAGE_NUM_HPQ		0x29
-#define WMM_NORMAL_PAGE_NUM_LPQ		0x1C
-#define WMM_NORMAL_PAGE_NUM_NPQ		0x1C
-
-
-/*  */
-/*	Chip specific */
-/*  */
-#define CHIP_BONDING_IDENTIFIER(_value)	(((_value)>>22)&0x3)
-#define CHIP_BONDING_92C_1T2R			0x1
-#define CHIP_BONDING_88C_USB_MCARD		0x2
-#define CHIP_BONDING_88C_USB_HP			0x1
-
-#include "HalVerDef.h"
-#include "hal_com.h"
-
-/*  */
-/*	Channel Plan */
-/*  */
-enum ChannelPlan
-{
-	CHPL_FCC	= 0,
-	CHPL_IC		= 1,
-	CHPL_ETSI	= 2,
-	CHPL_SPAIN	= 3,
-	CHPL_FRANCE	= 4,
-	CHPL_MKK	= 5,
-	CHPL_MKK1	= 6,
-	CHPL_ISRAEL	= 7,
-	CHPL_TELEC	= 8,
-	CHPL_GLOBAL	= 9,
-	CHPL_WORLD	= 10,
-};
-
-#define EFUSE_REAL_CONTENT_LEN		512
-#define EFUSE_MAP_LEN				128
-#define EFUSE_MAX_SECTION			16
-#define EFUSE_IC_ID_OFFSET			506	/* For some inferiority IC purpose. added by Roger, 2009.09.02. */
-#define AVAILABLE_EFUSE_ADDR(addr)	(addr < EFUSE_REAL_CONTENT_LEN)
-/*  */
-/*  <Roger_Notes> */
-/*  To prevent out of boundary programming case, */
-/*  leave 1byte and program full section */
-/*  9bytes + 1byt + 5bytes and pre 1byte. */
-/*  For worst case: */
-/*  | 1byte|----8bytes----|1byte|--5bytes--| */
-/*  |         |            Reserved(14bytes)	      | */
-/*  */
-
-/*  PG data exclude header, dummy 6 bytes from CP test and reserved 1byte. */
-#define EFUSE_OOB_PROTECT_BYTES			15
-
-#define EFUSE_REAL_CONTENT_LEN_8723A	512
-#define EFUSE_MAP_LEN_8723A				256
-#define EFUSE_MAX_SECTION_8723A			32
-
-/*  */
-/*			EFUSE for BT definition */
-/*  */
-#define EFUSE_BT_REAL_BANK_CONTENT_LEN	512
-#define EFUSE_BT_REAL_CONTENT_LEN		1536	/*  512*3 */
-#define EFUSE_BT_MAP_LEN				1024	/*  1k bytes */
-#define EFUSE_BT_MAX_SECTION			128		/*  1024/8 */
-
-#define EFUSE_PROTECT_BYTES_BANK		16
-
-/*  */
-/*  <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06. */
-/*  */
-enum RT_MULTI_FUNC {
-	RT_MULTI_FUNC_NONE = 0x00,
-	RT_MULTI_FUNC_WIFI = 0x01,
-	RT_MULTI_FUNC_BT = 0x02,
-	RT_MULTI_FUNC_GPS = 0x04,
-};
-
-/*  */
-/*  <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08. */
-/*  */
-enum RT_POLARITY_CTL {
-	RT_POLARITY_LOW_ACT = 0,
-	RT_POLARITY_HIGH_ACT = 1,
-};
-
-/*  For RTL8723 regulator mode. by tynli. 2011.01.14. */
-enum RT_REGULATOR_MODE {
-	RT_SWITCHING_REGULATOR = 0,
-	RT_LDO_REGULATOR = 1,
-};
-
-/*  Description: Determine the types of C2H events that are the same in driver and Fw. */
-/*  Fisrt constructed by tynli. 2009.10.09. */
-enum {
-	C2H_DBG = 0,
-	C2H_TSF = 1,
-	C2H_AP_RPT_RSP = 2,
-	C2H_CCX_TX_RPT = 3,	/*  The FW notify the report of the specific tx packet. */
-	C2H_BT_RSSI = 4,
-	C2H_BT_OP_MODE = 5,
-	C2H_EXT_RA_RPT = 6,
-	C2H_HW_INFO_EXCH = 10,
-	C2H_C2H_H2C_TEST = 11,
-	C2H_BT_INFO = 12,
-	C2H_BT_MP_INFO = 15,
-	MAX_C2HEVENT
-};
-
-struct hal_data_8723a {
-	struct hal_version		VersionID;
-	enum rt_customer_id CustomerID;
-
-	u16	FirmwareVersion;
-	u16	FirmwareVersionRev;
-	u16	FirmwareSubVersion;
-	u16	FirmwareSignature;
-
-	/* current WIFI_PHY values */
-	u32	ReceiveConfig;
-	enum WIRELESS_MODE		CurrentWirelessMode;
-	enum ht_channel_width	CurrentChannelBW;
-	u8	CurrentChannel;
-	u8	nCur40MhzPrimeSC;/*  Control channel sub-carrier */
-
-	u16	BasicRateSet;
-
-	/* rf_ctrl */
-	u8	rf_type;
-	u8	NumTotalRFPath;
-
-	u8	BoardType;
-	u8	CrystalCap;
-	/*  */
-	/*  EEPROM setting. */
-	/*  */
-	u8	EEPROMVersion;
-	u8	EEPROMCustomerID;
-	u8	EEPROMSubCustomerID;
-	u8	EEPROMRegulatory;
-	u8	EEPROMThermalMeter;
-	u8	EEPROMBluetoothCoexist;
-	u8	EEPROMBluetoothType;
-	u8	EEPROMBluetoothAntNum;
-	u8	EEPROMBluetoothAntIsolation;
-	u8	EEPROMBluetoothRadioShared;
-
-	u8	bTXPowerDataReadFromEEPORM;
-	u8	bAPKThermalMeterIgnore;
-
-	u8	bIQKInitialized;
-	u8	bAntennaDetected;
-
-	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	/*  For HT 40MHZ pwr */
-	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	/*  For HT 40MHZ pwr */
-	u8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];/*  HT 20<->40 Pwr diff */
-	u8	TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];/*  For HT<->legacy pwr diff */
-	/*  For power group */
-	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-
-	u8	LegacyHTTxPowerDiff;/*  Legacy to HT rate power diff */
-
-	/*  Read/write are allow for following hardware information variables */
-	u8	framesync;
-	u32	framesyncC34;
-	u8	framesyncMonitor;
-	u8	pwrGroupCnt;
-	u32	MCSTxPowerLevelOriginalOffset[7][16];
-	u32	CCKTxPowerLevelOriginalOffset;
-
-	u32	AntennaTxPath;					/*  Antenna path Tx */
-	u32	AntennaRxPath;					/*  Antenna path Rx */
-	u8	ExternalPA;
-
-	u8	bLedOpenDrain; /*  Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
-
-	u8	b1x1RecvCombine;	/*  for 1T1R receive combining */
-
-	/*  For EDCA Turbo mode */
-
-	u32	AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
-
-	/* vivi, for tx power tracking, 20080407 */
-	/* u16	TSSI_13dBm; */
-	/* u32	Pwr_Track; */
-	/*  The current Tx Power Level */
-	u8	CurrentCckTxPwrIdx;
-	u8	CurrentOfdm24GTxPwrIdx;
-
-	struct bb_reg_define	PHYRegDef[4];	/* Radio A/B/C/D */
-
-	bool		bRFPathRxEnable[4];	/*  We support 4 RF path now. */
-
-	u32	RfRegChnlVal[2];
-
-	u8	bCckHighPower;
-
-	/* RDG enable */
-	bool	 bRDGEnable;
-
-	/* for host message to fw */
-	u8	LastHMEBoxNum;
-
-	u8	RegTxPause;
-	/*  Beacon function related global variable. */
-	u8	RegFwHwTxQCtrl;
-	u8	RegReg542;
-
-	struct dm_priv	dmpriv;
-	struct dm_odm_t		odmpriv;
-	struct sreset_priv srestpriv;
-
-#ifdef CONFIG_8723AU_BT_COEXIST
-	u8				bBTMode;
-	/*  BT only. */
-	struct bt_30info		BtInfo;
-	/*  For bluetooth co-existance */
-	struct bt_coexist_str	bt_coexist;
-#endif
-
-	u8	bDumpRxPkt;/* for debug */
-	u8	FwRsvdPageStartOffset; /* 2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ. */
-
-	/*  2010/08/09 MH Add CU power down mode. */
-	u8	pwrdown;
-
-	u8	OutEpQueueSel;
-	u8	OutEpNumber;
-
-	/*  */
-	/*  Add For EEPROM Efuse switch and  Efuse Shadow map Setting */
-	/*  */
-	u8			EepromOrEfuse;
-	u16			EfuseUsedBytes;
-	u16			BTEfuseUsedBytes;
-
-	/*  Interrupt relatd register information. */
-	u32			SysIntrStatus;
-	u32			SysIntrMask;
-
-	/*  */
-	/*  2011/02/23 MH Add for 8723 mylti function definition. The define should be moved to an */
-	/*  independent file in the future. */
-	/*  */
-	/* 8723-----------------------------------------*/
-	enum RT_MULTI_FUNC	MultiFunc; /*  For multi-function consideration. */
-	enum RT_POLARITY_CTL	PolarityCtl; /*  For Wifi PDn Polarity control. */
-	enum RT_REGULATOR_MODE	RegulatorMode; /*  switching regulator or LDO */
-	/* 8723-----------------------------------------
-	 *  2011/02/23 MH Add for 8723 mylti function definition. The define should be moved to an */
-	/*  independent file in the future. */
-
-	/*  Interrupt related register information. */
-	u32	IntArray[2];
-	u32	IntrMask[2];
-};
-
-#define GET_HAL_DATA(__pAdapter)	((struct hal_data_8723a *)((__pAdapter)->HalData))
-#define GET_RF_TYPE(priv)			(GET_HAL_DATA(priv)->rf_type)
-
-#define INCLUDE_MULTI_FUNC_BT(_Adapter)		(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
-#define INCLUDE_MULTI_FUNC_GPS(_Adapter)	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
-
-struct rxreport_8723a {
-	u32 pktlen:14;
-	u32 crc32:1;
-	u32 icverr:1;
-	u32 drvinfosize:4;
-	u32 security:3;
-	u32 qos:1;
-	u32 shift:2;
-	u32 physt:1;
-	u32 swdec:1;
-	u32 ls:1;
-	u32 fs:1;
-	u32 eor:1;
-	u32 own:1;
-
-	u32 macid:5;
-	u32 tid:4;
-	u32 hwrsvd:4;
-	u32 amsdu:1;
-	u32 paggr:1;
-	u32 faggr:1;
-	u32 a1fit:4;
-	u32 a2fit:4;
-	u32 pam:1;
-	u32 pwr:1;
-	u32 md:1;
-	u32 mf:1;
-	u32 type:2;
-	u32 mc:1;
-	u32 bc:1;
-
-	u32 seq:12;
-	u32 frag:4;
-	u32 nextpktlen:14;
-	u32 nextind:1;
-	u32 rsvd0831:1;
-
-	u32 rxmcs:6;
-	u32 rxht:1;
-	u32 gf:1;
-	u32 splcp:1;
-	u32 bw:1;
-	u32 htc:1;
-	u32 eosp:1;
-	u32 bssidfit:2;
-	u32 rsvd1214:16;
-	u32 unicastwake:1;
-	u32 magicwake:1;
-
-	u32 pattern0match:1;
-	u32 pattern1match:1;
-	u32 pattern2match:1;
-	u32 pattern3match:1;
-	u32 pattern4match:1;
-	u32 pattern5match:1;
-	u32 pattern6match:1;
-	u32 pattern7match:1;
-	u32 pattern8match:1;
-	u32 pattern9match:1;
-	u32 patternamatch:1;
-	u32 patternbmatch:1;
-	u32 patterncmatch:1;
-	u32 rsvd1613:19;
-
-	u32 tsfl;
-
-	u32 bassn:12;
-	u32 bavld:1;
-	u32 rsvd2413:19;
-};
-
-/*  rtl8723a_hal_init.c */
-s32 rtl8723a_FirmwareDownload(struct rtw_adapter *padapter);
-void rtl8723a_FirmwareSelfReset(struct rtw_adapter *padapter);
-void rtl8723a_InitializeFirmwareVars(struct rtw_adapter *padapter);
-
-void rtl8723a_InitAntenna_Selection(struct rtw_adapter *padapter);
-void rtl8723a_DeinitAntenna_Selection(struct rtw_adapter *padapter);
-void rtl8723a_CheckAntenna_Selection(struct rtw_adapter *padapter);
-void rtl8723a_init_default_value(struct rtw_adapter *padapter);
-
-s32 InitLLTTable23a(struct rtw_adapter *padapter, u32 boundary);
-
-s32 CardDisableHWSM(struct rtw_adapter *padapter, u8 resetMCU);
-s32 CardDisableWithoutHWSM(struct rtw_adapter *padapter);
-
-/*  EFuse */
-u8 GetEEPROMSize8723A(struct rtw_adapter *padapter);
-void Hal_InitPGData(struct rtw_adapter *padapter, u8 *PROMContent);
-void Hal_EfuseParseIDCode(struct rtw_adapter *padapter, u8 *hwinfo);
-void Hal_EfuseParsetxpowerinfo_8723A(struct rtw_adapter *padapter, u8 *PROMContent, bool AutoLoadFail);
-void Hal_EfuseParseBTCoexistInfo_8723A(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseEEPROMVer(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void rtl8723a_EfuseParseChnlPlan(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseCustomerID(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseAntennaDiversity(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseRateIndicationOption(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseXtal_8723A(struct rtw_adapter *pAdapter, u8 *hwinfo, u8 AutoLoadFail);
-void Hal_EfuseParseThermalMeter_8723A(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-
-/*  register */
-void SetBcnCtrlReg23a(struct rtw_adapter *padapter, u8 SetBits, u8 ClearBits);
-void rtl8723a_InitBeaconParameters(struct rtw_adapter *padapter);
-
-void rtl8723a_start_thread(struct rtw_adapter *padapter);
-void rtl8723a_stop_thread(struct rtw_adapter *padapter);
-
-bool c2h_id_filter_ccx_8723a(u8 id);
-int c2h_handler_8723a(struct rtw_adapter *padapter, struct c2h_evt_hdr *c2h_evt);
-
-void rtl8723a_read_adapter_info(struct rtw_adapter *Adapter);
-void rtl8723a_read_chip_version(struct rtw_adapter *padapter);
-void rtl8723a_notch_filter(struct rtw_adapter *adapter, bool enable);
-void rtl8723a_SetBeaconRelatedRegisters(struct rtw_adapter *padapter);
-void rtl8723a_SetHalODMVar(struct rtw_adapter *Adapter,
-			   enum hal_odm_variable eVariable,
-			   void *pValue1, bool bSet);
-void
-rtl8723a_readefuse(struct rtw_adapter *padapter,
-		   u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf);
-u16 rtl8723a_EfuseGetCurrentSize_WiFi(struct rtw_adapter *padapter);
-u16 rtl8723a_EfuseGetCurrentSize_BT(struct rtw_adapter *padapter);
-void rtl8723a_update_ramask(struct rtw_adapter *padapter,
-			    u32 mac_id, u8 rssi_level);
-
-#endif