Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...

1 files changed, 0 insertions, 2076 deletions

diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
deleted file mode 100644
index 1ea0af4..0000000
--- a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
+++ /dev/null
@@ -1,2076 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- ******************************************************************************/
-#define _HAL_INIT_C_
-
-#include <linux/firmware.h>
-#include <drv_types.h>
-#include <rtw_efuse.h>
-
-#include <rtl8723a_hal.h>
-#include <usb_ops_linux.h>
-
-static void _FWDownloadEnable(struct rtw_adapter *padapter, bool enable)
-{
-	u8 tmp;
-
-	if (enable) {
-		/*  8051 enable */
-		tmp = rtl8723au_read8(padapter, REG_SYS_FUNC_EN + 1);
-		rtl8723au_write8(padapter, REG_SYS_FUNC_EN + 1, tmp | 0x04);
-
-		/*  MCU firmware download enable. */
-		tmp = rtl8723au_read8(padapter, REG_MCUFWDL);
-		rtl8723au_write8(padapter, REG_MCUFWDL, tmp | 0x01);
-
-		/*  8051 reset */
-		tmp = rtl8723au_read8(padapter, REG_MCUFWDL + 2);
-		rtl8723au_write8(padapter, REG_MCUFWDL + 2, tmp & 0xf7);
-	} else {
-		/*  MCU firmware download disable. */
-		tmp = rtl8723au_read8(padapter, REG_MCUFWDL);
-		rtl8723au_write8(padapter, REG_MCUFWDL, tmp & 0xfe);
-
-		/*  Reserved for fw extension. */
-		rtl8723au_write8(padapter, REG_MCUFWDL + 1, 0x00);
-	}
-}
-
-static int
-_PageWrite(struct rtw_adapter *padapter, u32 page, void *buffer, u32 size)
-{
-	u8 value8;
-	u8 u8Page = (u8) (page & 0x07);
-
-	if (size > MAX_PAGE_SIZE)
-		return _FAIL;
-
-	value8 = (rtl8723au_read8(padapter, REG_MCUFWDL + 2) & 0xF8) | u8Page;
-	rtl8723au_write8(padapter, REG_MCUFWDL + 2, value8);
-
-	return rtl8723au_writeN(padapter, FW_8723A_START_ADDRESS, size, buffer);
-}
-
-static int _WriteFW(struct rtw_adapter *padapter, void *buffer, u32 size)
-{
-	/*  Since we need dynamic decide method of dwonload fw, so we
-	    call this function to get chip version. */
-	/*  We can remove _ReadChipVersion from ReadpadapterInfo8192C later. */
-	int ret = _SUCCESS;
-	u32 pageNums, remainSize;
-	u32 page, offset;
-	u8 *bufferPtr = (u8 *) buffer;
-
-	pageNums = size / MAX_PAGE_SIZE;
-	/* RT_ASSERT((pageNums <= 4),
-	   ("Page numbers should not greater then 4 \n")); */
-	remainSize = size % MAX_PAGE_SIZE;
-
-	for (page = 0; page < pageNums; page++) {
-		offset = page * MAX_PAGE_SIZE;
-		ret = _PageWrite(padapter, page, bufferPtr + offset,
-				 MAX_PAGE_SIZE);
-
-		if (ret == _FAIL)
-			goto exit;
-	}
-	if (remainSize) {
-		offset = pageNums * MAX_PAGE_SIZE;
-		page = pageNums;
-		ret = _PageWrite(padapter, page, bufferPtr + offset,
-				 remainSize);
-
-		if (ret == _FAIL)
-			goto exit;
-	}
-	RT_TRACE(_module_hal_init_c_, _drv_info_,
-		 "_WriteFW Done- for Normal chip.\n");
-
-exit:
-	return ret;
-}
-
-static int _FWFreeToGo(struct rtw_adapter *padapter)
-{
-	u32 counter = 0;
-	u32 value32;
-
-	/*  polling CheckSum report */
-	do {
-		value32 = rtl8723au_read32(padapter, REG_MCUFWDL);
-		if (value32 & FWDL_ChkSum_rpt)
-			break;
-	} while (counter++ < POLLING_READY_TIMEOUT_COUNT);
-
-	if (counter >= POLLING_READY_TIMEOUT_COUNT) {
-		RT_TRACE(_module_hal_init_c_, _drv_err_,
-			 "%s: chksum report fail! REG_MCUFWDL:0x%08x\n",
-			 __func__, value32);
-		return _FAIL;
-	}
-	RT_TRACE(_module_hal_init_c_, _drv_info_,
-		 "%s: Checksum report OK! REG_MCUFWDL:0x%08x\n", __func__,
-		 value32);
-
-	value32 = rtl8723au_read32(padapter, REG_MCUFWDL);
-	value32 |= MCUFWDL_RDY;
-	value32 &= ~WINTINI_RDY;
-	rtl8723au_write32(padapter, REG_MCUFWDL, value32);
-
-	/*  polling for FW ready */
-	counter = 0;
-	do {
-		value32 = rtl8723au_read32(padapter, REG_MCUFWDL);
-		if (value32 & WINTINI_RDY) {
-			RT_TRACE(_module_hal_init_c_, _drv_info_,
-				 "%s: Polling FW ready success!! REG_MCUFWDL:0x%08x\n",
-				 __func__, value32);
-			return _SUCCESS;
-		}
-		udelay(5);
-	} while (counter++ < POLLING_READY_TIMEOUT_COUNT);
-
-	RT_TRACE(_module_hal_init_c_, _drv_err_,
-		 "%s: Polling FW ready fail!! REG_MCUFWDL:0x%08x\n",
-		 __func__, value32);
-	return _FAIL;
-}
-
-#define IS_FW_81xxC(padapter)	(((GET_HAL_DATA(padapter))->FirmwareSignature & 0xFFF0) == 0x88C0)
-
-void rtl8723a_FirmwareSelfReset(struct rtw_adapter *padapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	u8 u1bTmp;
-	u8 Delay = 100;
-
-	if (!(IS_FW_81xxC(padapter) &&
-	      ((pHalData->FirmwareVersion < 0x21) ||
-	       (pHalData->FirmwareVersion == 0x21 &&
-		pHalData->FirmwareSubVersion < 0x01)))) {
-		/*  after 88C Fw v33.1 */
-		/* 0x1cf = 0x20. Inform 8051 to reset. 2009.12.25. tynli_test */
-		rtl8723au_write8(padapter, REG_HMETFR + 3, 0x20);
-
-		u1bTmp = rtl8723au_read8(padapter, REG_SYS_FUNC_EN + 1);
-		while (u1bTmp & BIT(2)) {
-			Delay--;
-			if (Delay == 0)
-				break;
-			udelay(50);
-			u1bTmp = rtl8723au_read8(padapter, REG_SYS_FUNC_EN + 1);
-		}
-		RT_TRACE(_module_hal_init_c_, _drv_info_,
-			 "-%s: 8051 reset success (%d)\n", __func__,
-			 Delay);
-
-		if ((Delay == 0)) {
-			/* force firmware reset */
-			u1bTmp = rtl8723au_read8(padapter, REG_SYS_FUNC_EN + 1);
-			rtl8723au_write8(padapter, REG_SYS_FUNC_EN + 1,
-					 u1bTmp & ~BIT(2));
-		}
-	}
-}
-
-/*  */
-/*	Description: */
-/*		Download 8192C firmware code. */
-/*  */
-/*  */
-int rtl8723a_FirmwareDownload(struct rtw_adapter *padapter)
-{
-	int rtStatus = _SUCCESS;
-	u8 writeFW_retry = 0;
-	unsigned long fwdl_start_time;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
-	struct device *device = dvobj_to_dev(dvobj);
-	struct rt_8723a_firmware_hdr *pFwHdr = NULL;
-	const struct firmware *fw;
-	char *fw_name;
-	u8 *firmware_buf = NULL;
-	u8 *buf;
-	int fw_size;
-	static int log_version;
-
-	RT_TRACE(_module_hal_init_c_, _drv_info_, "+%s\n", __func__);
-
-	if (IS_8723A_A_CUT(pHalData->VersionID)) {
-		fw_name = "rtlwifi/rtl8723aufw_A.bin";
-		RT_TRACE(_module_hal_init_c_, _drv_info_,
-			 "rtl8723a_FirmwareDownload: R8723FwImageArray_UMC for RTL8723A A CUT\n");
-	} else if (IS_8723A_B_CUT(pHalData->VersionID)) {
-		/*  WLAN Fw. */
-		if (padapter->registrypriv.wifi_spec == 1) {
-			fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin";
-			DBG_8723A(" Rtl8723_FwUMCBCutImageArrayWithoutBT for "
-				  "RTL8723A B CUT\n");
-		} else {
-			if (rtl8723a_BT_coexist(padapter)) {
-				fw_name = "rtlwifi/rtl8723aufw_B.bin";
-				DBG_8723A(" Rtl8723_FwUMCBCutImageArrayWithBT "
-					  "for RTL8723A B CUT\n");
-			} else {
-				fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin";
-				DBG_8723A(" Rtl8723_FwUMCBCutImageArrayWithout "
-					  "BT for RTL8723A B CUT\n");
-			}
-		}
-	} else {
-		/*  <Roger_TODO> We should download proper RAM Code here
-		    to match the ROM code. */
-		RT_TRACE(_module_hal_init_c_, _drv_err_,
-			 "%s: unknown version!\n", __func__);
-		rtStatus = _FAIL;
-		goto Exit;
-	}
-
-	pr_info("rtl8723au: Loading firmware %s\n", fw_name);
-	if (request_firmware(&fw, fw_name, device)) {
-		pr_err("rtl8723au: request_firmware load failed\n");
-		rtStatus = _FAIL;
-		goto Exit;
-	}
-	if (!fw) {
-		pr_err("rtl8723au: Firmware %s not available\n", fw_name);
-		rtStatus = _FAIL;
-		goto Exit;
-	}
-	firmware_buf = kmemdup(fw->data, fw->size, GFP_KERNEL);
-	fw_size = fw->size;
-	release_firmware(fw);
-	if (!firmware_buf) {
-		rtStatus = _FAIL;
-		goto Exit;
-	}
-	buf = firmware_buf;
-
-	/*  To Check Fw header. Added by tynli. 2009.12.04. */
-	pFwHdr = (struct rt_8723a_firmware_hdr *)firmware_buf;
-
-	pHalData->FirmwareVersion = le16_to_cpu(pFwHdr->Version);
-	pHalData->FirmwareSubVersion = pFwHdr->Subversion;
-	pHalData->FirmwareSignature = le16_to_cpu(pFwHdr->Signature);
-
-	DBG_8723A("%s: fw_ver =%d fw_subver =%d sig = 0x%x\n",
-		  __func__, pHalData->FirmwareVersion,
-		  pHalData->FirmwareSubVersion, pHalData->FirmwareSignature);
-
-	if (!log_version++)
-		pr_info("%sFirmware Version %d, SubVersion %d, Signature "
-			"0x%x\n", DRIVER_PREFIX, pHalData->FirmwareVersion,
-			pHalData->FirmwareSubVersion,
-			pHalData->FirmwareSignature);
-
-	if (IS_FW_HEADER_EXIST(pFwHdr)) {
-		/*  Shift 32 bytes for FW header */
-		buf = buf + 32;
-		fw_size = fw_size - 32;
-	}
-
-	/*  Suggested by Filen. If 8051 is running in RAM code, driver should
-	    inform Fw to reset by itself, */
-	/*  or it will cause download Fw fail. 2010.02.01. by tynli. */
-	if (rtl8723au_read8(padapter, REG_MCUFWDL) & RAM_DL_SEL) {
-		/* 8051 RAM code */
-		rtl8723a_FirmwareSelfReset(padapter);
-		rtl8723au_write8(padapter, REG_MCUFWDL, 0x00);
-	}
-
-	_FWDownloadEnable(padapter, true);
-	fwdl_start_time = jiffies;
-	while (1) {
-		/* reset the FWDL chksum */
-		rtl8723au_write8(padapter, REG_MCUFWDL,
-				 rtl8723au_read8(padapter, REG_MCUFWDL) |
-				 FWDL_ChkSum_rpt);
-
-		rtStatus = _WriteFW(padapter, buf, fw_size);
-
-		if (rtStatus == _SUCCESS ||
-		    (jiffies_to_msecs(jiffies - fwdl_start_time) > 500 &&
-		     writeFW_retry++ >= 3))
-			break;
-
-		DBG_8723A("%s writeFW_retry:%u, time after fwdl_start_time:"
-			  "%ums\n", __func__, writeFW_retry,
-			  jiffies_to_msecs(jiffies - fwdl_start_time));
-	}
-	_FWDownloadEnable(padapter, false);
-	if (_SUCCESS != rtStatus) {
-		DBG_8723A("DL Firmware failed!\n");
-		goto Exit;
-	}
-
-	rtStatus = _FWFreeToGo(padapter);
-	if (_SUCCESS != rtStatus) {
-		RT_TRACE(_module_hal_init_c_, _drv_err_,
-			 "DL Firmware failed!\n");
-		goto Exit;
-	}
-	RT_TRACE(_module_hal_init_c_, _drv_info_,
-		 "Firmware is ready to run!\n");
-
-Exit:
-	kfree(firmware_buf);
-	return rtStatus;
-}
-
-void rtl8723a_InitializeFirmwareVars(struct rtw_adapter *padapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	/*  Init Fw LPS related. */
-	padapter->pwrctrlpriv.bFwCurrentInPSMode = false;
-
-	/*  Init H2C counter. by tynli. 2009.12.09. */
-	pHalData->LastHMEBoxNum = 0;
-}
-
-/*  */
-/*				Efuse related code */
-/*  */
-static u8
-hal_EfuseSwitchToBank(struct rtw_adapter *padapter, u8 bank)
-{
-	u8 bRet = false;
-	u32 value32 = 0;
-
-	DBG_8723A("%s: Efuse switch bank to %d\n", __func__, bank);
-	value32 = rtl8723au_read32(padapter, EFUSE_TEST);
-	bRet = true;
-	switch (bank) {
-	case 0:
-		value32 = (value32 & ~EFUSE_SEL_MASK) |
-			EFUSE_SEL(EFUSE_WIFI_SEL_0);
-		break;
-	case 1:
-		value32 = (value32 & ~EFUSE_SEL_MASK) |
-			EFUSE_SEL(EFUSE_BT_SEL_0);
-		break;
-	case 2:
-		value32 = (value32 & ~EFUSE_SEL_MASK) |
-			EFUSE_SEL(EFUSE_BT_SEL_1);
-		break;
-	case 3:
-		value32 = (value32 & ~EFUSE_SEL_MASK) |
-			EFUSE_SEL(EFUSE_BT_SEL_2);
-		break;
-	default:
-		value32 = (value32 & ~EFUSE_SEL_MASK) |
-			EFUSE_SEL(EFUSE_WIFI_SEL_0);
-		bRet = false;
-		break;
-	}
-	rtl8723au_write32(padapter, EFUSE_TEST, value32);
-
-	return bRet;
-}
-
-static void
-hal_ReadEFuse_WiFi(struct rtw_adapter *padapter,
-		   u16 _offset, u16 _size_byte, u8 *pbuf)
-{
-	u8 *efuseTbl = NULL;
-	u16 eFuse_Addr = 0;
-	u8 offset, wden;
-	u8 efuseHeader, efuseExtHdr, efuseData;
-	u16 i, total, used;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	/*  Do NOT excess total size of EFuse table.
-	    Added by Roger, 2008.11.10. */
-	if ((_offset + _size_byte) > EFUSE_MAP_LEN_8723A) {
-		DBG_8723A("%s: Invalid offset(%#x) with read bytes(%#x)!!\n",
-			  __func__, _offset, _size_byte);
-		return;
-	}
-
-	efuseTbl = kmalloc(EFUSE_MAP_LEN_8723A, GFP_KERNEL);
-	if (!efuseTbl)
-		return;
-	/*  0xff will be efuse default value instead of 0x00. */
-	memset(efuseTbl, 0xFF, EFUSE_MAP_LEN_8723A);
-
-	/*  switch bank back to bank 0 for later BT and wifi use. */
-	hal_EfuseSwitchToBank(padapter, 0);
-
-	while (AVAILABLE_EFUSE_ADDR(eFuse_Addr)) {
-		ReadEFuseByte23a(padapter, eFuse_Addr++, &efuseHeader);
-		if (efuseHeader == 0xFF) {
-			DBG_8723A("%s: data end at address =%#x\n", __func__,
-				  eFuse_Addr);
-			break;
-		}
-
-		/*  Check PG header for section num. */
-		if (EXT_HEADER(efuseHeader)) {	/* extended header */
-			offset = GET_HDR_OFFSET_2_0(efuseHeader);
-
-			ReadEFuseByte23a(padapter, eFuse_Addr++, &efuseExtHdr);
-			if (ALL_WORDS_DISABLED(efuseExtHdr))
-				continue;
-
-			offset |= ((efuseExtHdr & 0xF0) >> 1);
-			wden = efuseExtHdr & 0x0F;
-		} else {
-			offset = (efuseHeader >> 4) & 0x0f;
-			wden = efuseHeader & 0x0f;
-		}
-
-		if (offset < EFUSE_MAX_SECTION_8723A) {
-			u16 addr;
-			/*  Get word enable value from PG header */
-
-			addr = offset * PGPKT_DATA_SIZE;
-			for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
-				/* Check word enable condition in the section */
-				if (!(wden & (0x01 << i))) {
-					ReadEFuseByte23a(padapter, eFuse_Addr++,
-						      &efuseData);
-					efuseTbl[addr] = efuseData;
-
-					ReadEFuseByte23a(padapter, eFuse_Addr++,
-						      &efuseData);
-					efuseTbl[addr + 1] = efuseData;
-				}
-				addr += 2;
-			}
-		} else {
-			DBG_8723A(KERN_ERR "%s: offset(%d) is illegal!!\n",
-				  __func__, offset);
-			eFuse_Addr += Efuse_CalculateWordCnts23a(wden) * 2;
-		}
-	}
-
-	/*  Copy from Efuse map to output pointer memory!!! */
-	for (i = 0; i < _size_byte; i++)
-		pbuf[i] = efuseTbl[_offset + i];
-
-	/*  Calculate Efuse utilization */
-	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_WIFI,
-				 TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, &total);
-	used = eFuse_Addr - 1;
-	pHalData->EfuseUsedBytes = used;
-
-	kfree(efuseTbl);
-}
-
-static void
-hal_ReadEFuse_BT(struct rtw_adapter *padapter,
-		 u16 _offset, u16 _size_byte, u8 *pbuf)
-{
-	u8 *efuseTbl;
-	u8 bank;
-	u16 eFuse_Addr;
-	u8 efuseHeader, efuseExtHdr, efuseData;
-	u8 offset, wden;
-	u16 i, total, used;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	/*  Do NOT excess total size of EFuse table.
-	    Added by Roger, 2008.11.10. */
-	if ((_offset + _size_byte) > EFUSE_BT_MAP_LEN) {
-		DBG_8723A("%s: Invalid offset(%#x) with read bytes(%#x)!!\n",
-			  __func__, _offset, _size_byte);
-		return;
-	}
-
-	efuseTbl = kmalloc(EFUSE_BT_MAP_LEN, GFP_KERNEL);
-	if (!efuseTbl)
-		return;
-	/*  0xff will be efuse default value instead of 0x00. */
-	memset(efuseTbl, 0xFF, EFUSE_BT_MAP_LEN);
-
-	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_BT,
-				 TYPE_AVAILABLE_EFUSE_BYTES_BANK, &total);
-
-	for (bank = 1; bank < EFUSE_MAX_BANK; bank++) {
-		if (hal_EfuseSwitchToBank(padapter, bank) == false) {
-			DBG_8723A("%s: hal_EfuseSwitchToBank Fail!!\n",
-				  __func__);
-			goto exit;
-		}
-
-		eFuse_Addr = 0;
-
-		while (AVAILABLE_EFUSE_ADDR(eFuse_Addr)) {
-			ReadEFuseByte23a(padapter, eFuse_Addr++, &efuseHeader);
-			if (efuseHeader == 0xFF)
-				break;
-
-			/*  Check PG header for section num. */
-			if (EXT_HEADER(efuseHeader)) {	/* extended header */
-				offset = GET_HDR_OFFSET_2_0(efuseHeader);
-
-				ReadEFuseByte23a(padapter, eFuse_Addr++,
-					      &efuseExtHdr);
-				if (ALL_WORDS_DISABLED(efuseExtHdr))
-					continue;
-
-				offset |= ((efuseExtHdr & 0xF0) >> 1);
-				wden = efuseExtHdr & 0x0F;
-			} else {
-				offset = (efuseHeader >> 4) & 0x0f;
-				wden = efuseHeader & 0x0f;
-			}
-
-			if (offset < EFUSE_BT_MAX_SECTION) {
-				u16 addr;
-
-				/*  Get word enable value from PG header */
-
-				addr = offset * PGPKT_DATA_SIZE;
-				for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
-					/*  Check word enable condition in
-					    the section */
-					if (!(wden & (0x01 << i))) {
-						ReadEFuseByte23a(padapter,
-							      eFuse_Addr++,
-							      &efuseData);
-						efuseTbl[addr] = efuseData;
-
-						ReadEFuseByte23a(padapter,
-							      eFuse_Addr++,
-							      &efuseData);
-						efuseTbl[addr + 1] = efuseData;
-					}
-					addr += 2;
-				}
-			} else {
-				DBG_8723A(KERN_ERR
-					  "%s: offset(%d) is illegal!!\n",
-					  __func__, offset);
-				eFuse_Addr += Efuse_CalculateWordCnts23a(wden) * 2;
-			}
-		}
-
-		if ((eFuse_Addr - 1) < total) {
-			DBG_8723A("%s: bank(%d) data end at %#x\n",
-				  __func__, bank, eFuse_Addr - 1);
-			break;
-		}
-	}
-
-	/*  switch bank back to bank 0 for later BT and wifi use. */
-	hal_EfuseSwitchToBank(padapter, 0);
-
-	/*  Copy from Efuse map to output pointer memory!!! */
-	for (i = 0; i < _size_byte; i++)
-		pbuf[i] = efuseTbl[_offset + i];
-
-	/*  */
-	/*  Calculate Efuse utilization. */
-	/*  */
-	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_BT,
-				 TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, &total);
-	used = (EFUSE_BT_REAL_BANK_CONTENT_LEN * (bank - 1)) + eFuse_Addr - 1;
-	pHalData->BTEfuseUsedBytes = used;
-
-exit:
-	kfree(efuseTbl);
-}
-
-void
-rtl8723a_readefuse(struct rtw_adapter *padapter,
-		   u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf)
-{
-	if (efuseType == EFUSE_WIFI)
-		hal_ReadEFuse_WiFi(padapter, _offset, _size_byte, pbuf);
-	else
-		hal_ReadEFuse_BT(padapter, _offset, _size_byte, pbuf);
-}
-
-u16 rtl8723a_EfuseGetCurrentSize_WiFi(struct rtw_adapter *padapter)
-{
-	u16 efuse_addr = 0;
-	u8 hoffset = 0, hworden = 0;
-	u8 efuse_data, word_cnts = 0;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	efuse_addr = pHalData->EfuseUsedBytes;
-
-	DBG_8723A("%s: start_efuse_addr = 0x%X\n", __func__, efuse_addr);
-
-	/*  switch bank back to bank 0 for later BT and wifi use. */
-	hal_EfuseSwitchToBank(padapter, 0);
-
-	while (AVAILABLE_EFUSE_ADDR(efuse_addr)) {
-		if (efuse_OneByteRead23a(padapter, efuse_addr, &efuse_data) ==
-		    _FAIL) {
-			DBG_8723A(KERN_ERR "%s: efuse_OneByteRead23a Fail! "
-				  "addr = 0x%X !!\n", __func__, efuse_addr);
-			break;
-		}
-
-		if (efuse_data == 0xFF)
-			break;
-
-		if (EXT_HEADER(efuse_data)) {
-			hoffset = GET_HDR_OFFSET_2_0(efuse_data);
-			efuse_addr++;
-			efuse_OneByteRead23a(padapter, efuse_addr, &efuse_data);
-			if (ALL_WORDS_DISABLED(efuse_data))
-				continue;
-
-			hoffset |= ((efuse_data & 0xF0) >> 1);
-			hworden = efuse_data & 0x0F;
-		} else {
-			hoffset = (efuse_data >> 4) & 0x0F;
-			hworden = efuse_data & 0x0F;
-		}
-
-		word_cnts = Efuse_CalculateWordCnts23a(hworden);
-		efuse_addr += (word_cnts * 2) + 1;
-	}
-
-	pHalData->EfuseUsedBytes = efuse_addr;
-
-	DBG_8723A("%s: CurrentSize =%d\n", __func__, efuse_addr);
-
-	return efuse_addr;
-}
-
-u16 rtl8723a_EfuseGetCurrentSize_BT(struct rtw_adapter *padapter)
-{
-	u16 btusedbytes;
-	u16 efuse_addr;
-	u8 bank, startBank;
-	u8 hoffset = 0, hworden = 0;
-	u8 efuse_data, word_cnts = 0;
-	u16 retU2 = 0;
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	btusedbytes = pHalData->BTEfuseUsedBytes;
-
-	efuse_addr = (u16) ((btusedbytes % EFUSE_BT_REAL_BANK_CONTENT_LEN));
-	startBank = (u8) (1 + (btusedbytes / EFUSE_BT_REAL_BANK_CONTENT_LEN));
-
-	DBG_8723A("%s: start from bank =%d addr = 0x%X\n", __func__, startBank,
-		  efuse_addr);
-
-	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_BT,
-				 TYPE_AVAILABLE_EFUSE_BYTES_BANK, &retU2);
-
-	for (bank = startBank; bank < EFUSE_MAX_BANK; bank++) {
-		if (hal_EfuseSwitchToBank(padapter, bank) == false) {
-			DBG_8723A(KERN_ERR "%s: switch bank(%d) Fail!!\n",
-				  __func__, bank);
-			bank = EFUSE_MAX_BANK;
-			break;
-		}
-
-		/*  only when bank is switched we have to reset
-		    the efuse_addr. */
-		if (bank != startBank)
-			efuse_addr = 0;
-
-		while (AVAILABLE_EFUSE_ADDR(efuse_addr)) {
-			if (efuse_OneByteRead23a(padapter, efuse_addr,
-					      &efuse_data) == _FAIL) {
-				DBG_8723A(KERN_ERR "%s: efuse_OneByteRead23a Fail!"
-					  " addr = 0x%X !!\n",
-					  __func__, efuse_addr);
-				bank = EFUSE_MAX_BANK;
-				break;
-			}
-
-			if (efuse_data == 0xFF)
-				break;
-
-			if (EXT_HEADER(efuse_data)) {
-				hoffset = GET_HDR_OFFSET_2_0(efuse_data);
-				efuse_addr++;
-				efuse_OneByteRead23a(padapter, efuse_addr,
-						  &efuse_data);
-				if (ALL_WORDS_DISABLED(efuse_data)) {
-					efuse_addr++;
-					continue;
-				}
-
-				hoffset |= ((efuse_data & 0xF0) >> 1);
-				hworden = efuse_data & 0x0F;
-			} else {
-				hoffset = (efuse_data >> 4) & 0x0F;
-				hworden = efuse_data & 0x0F;
-			}
-			word_cnts = Efuse_CalculateWordCnts23a(hworden);
-			/* read next header */
-			efuse_addr += (word_cnts * 2) + 1;
-		}
-
-		/*  Check if we need to check next bank efuse */
-		if (efuse_addr < retU2)
-			break;	/*  don't need to check next bank. */
-	}
-
-	retU2 = ((bank - 1) * EFUSE_BT_REAL_BANK_CONTENT_LEN) + efuse_addr;
-	pHalData->BTEfuseUsedBytes = retU2;
-
-	DBG_8723A("%s: CurrentSize =%d\n", __func__, retU2);
-	return retU2;
-}
-
-void rtl8723a_read_chip_version(struct rtw_adapter *padapter)
-{
-	u32 value32;
-	struct hal_version ChipVersion;
-	struct hal_data_8723a *pHalData;
-
-	pHalData = GET_HAL_DATA(padapter);
-
-	value32 = rtl8723au_read32(padapter, REG_SYS_CFG);
-	ChipVersion.ICType = CHIP_8723A;
-	ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP);
-	pHalData->rf_type = RF_1T1R;
-	ChipVersion.VendorType =
-		((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC);
-	ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK) >> CHIP_VER_RTL_SHIFT;	/*  IC version (CUT) */
-
-	/*  For regulator mode. by tynli. 2011.01.14 */
-	pHalData->RegulatorMode = ((value32 & SPS_SEL) ?
-				   RT_LDO_REGULATOR : RT_SWITCHING_REGULATOR);
-
-	value32 = rtl8723au_read32(padapter, REG_GPIO_OUTSTS);
-	/*  ROM code version. */
-	ChipVersion.ROMVer = (value32 & RF_RL_ID) >> 20;
-
-	/*  For multi-function consideration. Added by Roger, 2010.10.06. */
-	pHalData->MultiFunc = RT_MULTI_FUNC_NONE;
-	value32 = rtl8723au_read32(padapter, REG_MULTI_FUNC_CTRL);
-	pHalData->MultiFunc |=
-		((value32 & WL_FUNC_EN) ? RT_MULTI_FUNC_WIFI : 0);
-	pHalData->MultiFunc |= ((value32 & BT_FUNC_EN) ? RT_MULTI_FUNC_BT : 0);
-	pHalData->MultiFunc |=
-		((value32 & GPS_FUNC_EN) ? RT_MULTI_FUNC_GPS : 0);
-	pHalData->PolarityCtl =
-		((value32 & WL_HWPDN_SL) ? RT_POLARITY_HIGH_ACT :
-		 RT_POLARITY_LOW_ACT);
-	pHalData->VersionID = ChipVersion;
-
-	MSG_8723A("RF_Type is %x!!\n", pHalData->rf_type);
-}
-
-/*  */
-/*  */
-/*  20100209 Joseph: */
-/*  This function is used only for 92C to set REG_BCN_CTRL(0x550) register. */
-/*  We just reserve the value of the register in variable
-    pHalData->RegBcnCtrlVal and then operate */
-/*  the value of the register via atomic operation. */
-/*  This prevents from race condition when setting this register. */
-/*  The value of pHalData->RegBcnCtrlVal is initialized in
-    HwConfigureRTL8192CE() function. */
-/*  */
-void SetBcnCtrlReg23a(struct rtw_adapter *padapter, u8 SetBits, u8 ClearBits)
-{
-	u8 val8;
-
-	val8 = rtl8723au_read8(padapter, REG_BCN_CTRL);
-	val8 |= SetBits;
-	val8 &= ~ClearBits;
-
-	rtl8723au_write8(padapter, REG_BCN_CTRL, val8);
-}
-
-void rtl8723a_InitBeaconParameters(struct rtw_adapter *padapter)
-{
-	rtl8723au_write16(padapter, REG_BCN_CTRL, 0x1010);
-
-	/*  TODO: Remove these magic number */
-	rtl8723au_write16(padapter, REG_TBTT_PROHIBIT, 0x6404);	/*  ms */
-	/*  Firmware will control REG_DRVERLYINT when power saving is enable, */
-	/*  so don't set this register on STA mode. */
-	if (check_fwstate(&padapter->mlmepriv, WIFI_STATION_STATE) == false)
-		rtl8723au_write8(padapter, REG_DRVERLYINT,
-				 DRIVER_EARLY_INT_TIME);
-	/*  2ms */
-	rtl8723au_write8(padapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME);
-
-	/*  Suggested by designer timchen. Change beacon AIFS to the
-	    largest number beacause test chip does not contension before
-	    sending beacon. by tynli. 2009.11.03 */
-	rtl8723au_write16(padapter, REG_BCNTCFG, 0x660F);
-}
-
-static void ResumeTxBeacon(struct rtw_adapter *padapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	/*  2010.03.01. Marked by tynli. No need to call workitem beacause
-	    we record the value */
-	/*  which should be read from register to a global variable. */
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, "+ResumeTxBeacon\n");
-
-	pHalData->RegFwHwTxQCtrl |= BIT(6);
-	rtl8723au_write8(padapter, REG_FWHW_TXQ_CTRL + 2,
-			 pHalData->RegFwHwTxQCtrl);
-	rtl8723au_write8(padapter, REG_TBTT_PROHIBIT + 1, 0xff);
-	pHalData->RegReg542 |= BIT(0);
-	rtl8723au_write8(padapter, REG_TBTT_PROHIBIT + 2, pHalData->RegReg542);
-}
-
-static void StopTxBeacon(struct rtw_adapter *padapter)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	/*  2010.03.01. Marked by tynli. No need to call workitem beacause
-	    we record the value */
-	/*  which should be read from register to a global variable. */
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, "+StopTxBeacon\n");
-
-	pHalData->RegFwHwTxQCtrl &= ~BIT(6);
-	rtl8723au_write8(padapter, REG_FWHW_TXQ_CTRL + 2,
-			 pHalData->RegFwHwTxQCtrl);
-	rtl8723au_write8(padapter, REG_TBTT_PROHIBIT + 1, 0x64);
-	pHalData->RegReg542 &= ~BIT(0);
-	rtl8723au_write8(padapter, REG_TBTT_PROHIBIT + 2, pHalData->RegReg542);
-}
-
-static void _BeaconFunctionEnable(struct rtw_adapter *padapter, u8 Enable,
-				  u8 Linked)
-{
-	SetBcnCtrlReg23a(padapter, DIS_TSF_UDT | EN_BCN_FUNCTION | DIS_BCNQ_SUB,
-		      0);
-	rtl8723au_write8(padapter, REG_RD_CTRL + 1, 0x6F);
-}
-
-void rtl8723a_SetBeaconRelatedRegisters(struct rtw_adapter *padapter)
-{
-	u32 value32;
-	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-
-	/* reset TSF, enable update TSF, correcting TSF On Beacon */
-
-	/* REG_BCN_INTERVAL */
-	/* REG_BCNDMATIM */
-	/* REG_ATIMWND */
-	/* REG_TBTT_PROHIBIT */
-	/* REG_DRVERLYINT */
-	/* REG_BCN_MAX_ERR */
-	/* REG_BCNTCFG (0x510) */
-	/* REG_DUAL_TSF_RST */
-	/* REG_BCN_CTRL (0x550) */
-
-	/*  */
-	/*  ATIM window */
-	/*  */
-	rtl8723au_write16(padapter, REG_ATIMWND, 2);
-
-	/*  */
-	/*  Beacon interval (in unit of TU). */
-	/*  */
-	rtl8723au_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
-
-	rtl8723a_InitBeaconParameters(padapter);
-
-	rtl8723au_write8(padapter, REG_SLOT, 0x09);
-
-	/*  */
-	/*  Reset TSF Timer to zero, added by Roger. 2008.06.24 */
-	/*  */
-	value32 = rtl8723au_read32(padapter, REG_TCR);
-	value32 &= ~TSFRST;
-	rtl8723au_write32(padapter, REG_TCR, value32);
-
-	value32 |= TSFRST;
-	rtl8723au_write32(padapter, REG_TCR, value32);
-
-	/*  NOTE: Fix test chip's bug (about contention windows's randomness) */
-	if (check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE |
-			  WIFI_ADHOC_MASTER_STATE | WIFI_AP_STATE) == true) {
-		rtl8723au_write8(padapter, REG_RXTSF_OFFSET_CCK, 0x50);
-		rtl8723au_write8(padapter, REG_RXTSF_OFFSET_OFDM, 0x50);
-	}
-
-	_BeaconFunctionEnable(padapter, true, true);
-
-	ResumeTxBeacon(padapter);
-	SetBcnCtrlReg23a(padapter, DIS_BCNQ_SUB, 0);
-}
-
-void rtl8723a_SetHalODMVar(struct rtw_adapter *Adapter,
-			   enum hal_odm_variable eVariable,
-			   void *pValue1, bool bSet)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	struct dm_odm_t *podmpriv = &pHalData->odmpriv;
-	switch (eVariable) {
-	case HAL_ODM_STA_INFO:
-	{
-		struct sta_info *psta = (struct sta_info *)pValue1;
-
-		if (bSet) {
-			DBG_8723A("Set STA_(%d) info\n", psta->mac_id);
-			ODM_CmnInfoPtrArrayHook23a(podmpriv,
-						ODM_CMNINFO_STA_STATUS,
-						psta->mac_id, psta);
-		} else {
-			DBG_8723A("Clean STA_(%d) info\n", psta->mac_id);
-				ODM_CmnInfoPtrArrayHook23a(podmpriv,
-							ODM_CMNINFO_STA_STATUS,
-							psta->mac_id, NULL);
-		}
-	}
-		break;
-	case HAL_ODM_P2P_STATE:
-		ODM_CmnInfoUpdate23a(podmpriv, ODM_CMNINFO_WIFI_DIRECT, bSet);
-		break;
-	case HAL_ODM_WIFI_DISPLAY_STATE:
-		ODM_CmnInfoUpdate23a(podmpriv, ODM_CMNINFO_WIFI_DISPLAY, bSet);
-		break;
-	default:
-		break;
-	}
-}
-
-void rtl8723a_notch_filter(struct rtw_adapter *adapter, bool enable)
-{
-	if (enable) {
-		DBG_8723A("Enable notch filter\n");
-		rtl8723au_write8(adapter, rOFDM0_RxDSP + 1,
-				 rtl8723au_read8(adapter, rOFDM0_RxDSP + 1) |
-				 BIT(1));
-	} else {
-		DBG_8723A("Disable notch filter\n");
-		rtl8723au_write8(adapter, rOFDM0_RxDSP + 1,
-			   rtl8723au_read8(adapter, rOFDM0_RxDSP + 1) &
-				 ~BIT(1));
-	}
-}
-
-bool c2h_id_filter_ccx_8723a(u8 id)
-{
-	bool ret = false;
-	if (id == C2H_CCX_TX_RPT)
-		ret = true;
-
-	return ret;
-}
-
-int c2h_handler_8723a(struct rtw_adapter *padapter, struct c2h_evt_hdr *c2h_evt)
-{
-	int ret = _SUCCESS;
-	u8 i = 0;
-
-	if (c2h_evt == NULL) {
-		DBG_8723A("%s c2h_evt is NULL\n", __func__);
-		ret = _FAIL;
-		goto exit;
-	}
-
-	switch (c2h_evt->id) {
-	case C2H_DBG:
-		RT_TRACE(_module_hal_init_c_, _drv_info_,
-			 "C2HCommandHandler: %s\n", c2h_evt->payload);
-		break;
-
-	case C2H_CCX_TX_RPT:
-		handle_txrpt_ccx_8723a(padapter, c2h_evt->payload);
-		break;
-	case C2H_EXT_RA_RPT:
-		break;
-	case C2H_HW_INFO_EXCH:
-		RT_TRACE(_module_hal_init_c_, _drv_info_,
-			 "[BT], C2H_HW_INFO_EXCH\n");
-		for (i = 0; i < c2h_evt->plen; i++) {
-			RT_TRACE(_module_hal_init_c_, _drv_info_,
-				 "[BT], tmpBuf[%d]= 0x%x\n", i,
-				 c2h_evt->payload[i]);
-		}
-		break;
-
-	case C2H_C2H_H2C_TEST:
-		RT_TRACE(_module_hal_init_c_, _drv_info_,
-			 "[BT], C2H_H2C_TEST\n");
-		RT_TRACE(_module_hal_init_c_, _drv_info_,
-			 "[BT], tmpBuf[0]/[1]/[2]/[3]/[4]= 0x%x/ 0x%x/ 0x%x/ 0x%x/ 0x%x\n",
-			 c2h_evt->payload[0],
-			 c2h_evt->payload[1], c2h_evt->payload[2],
-			 c2h_evt->payload[3], c2h_evt->payload[4]);
-		break;
-
-	case C2H_BT_INFO:
-		DBG_8723A("%s ,  Got  C2H_BT_INFO \n", __func__);
-		rtl8723a_fw_c2h_BT_info(padapter,
-					c2h_evt->payload, c2h_evt->plen);
-		break;
-
-	default:
-		ret = _FAIL;
-		break;
-	}
-
-exit:
-	return ret;
-}
-
-void handle_txrpt_ccx_8723a(struct rtw_adapter *adapter, void *buf)
-{
-	struct txrpt_ccx_8723a *txrpt_ccx = buf;
-	struct submit_ctx *pack_tx_ops = &adapter->xmitpriv.ack_tx_ops;
-
-	if (txrpt_ccx->int_ccx && adapter->xmitpriv.ack_tx) {
-		if (txrpt_ccx->pkt_ok)
-			rtw23a_sctx_done_err(&pack_tx_ops,
-					     RTW_SCTX_DONE_SUCCESS);
-		else
-			rtw23a_sctx_done_err(&pack_tx_ops,
-					     RTW_SCTX_DONE_CCX_PKT_FAIL);
-	}
-}
-
-void rtl8723a_InitAntenna_Selection(struct rtw_adapter *padapter)
-{
-	u8 val;
-
-	val = rtl8723au_read8(padapter, REG_LEDCFG2);
-	/*  Let 8051 take control antenna setting */
-	val |= BIT(7);		/*  DPDT_SEL_EN, 0x4C[23] */
-	rtl8723au_write8(padapter, REG_LEDCFG2, val);
-}
-
-void rtl8723a_CheckAntenna_Selection(struct rtw_adapter *padapter)
-{
-	u8 val;
-
-	val = rtl8723au_read8(padapter, REG_LEDCFG2);
-	/*  Let 8051 take control antenna setting */
-	if (!(val & BIT(7))) {
-		val |= BIT(7);	/*  DPDT_SEL_EN, 0x4C[23] */
-		rtl8723au_write8(padapter, REG_LEDCFG2, val);
-	}
-}
-
-void rtl8723a_DeinitAntenna_Selection(struct rtw_adapter *padapter)
-{
-	u8 val;
-
-	val = rtl8723au_read8(padapter, REG_LEDCFG2);
-	/*  Let 8051 take control antenna setting */
-	val &= ~BIT(7);		/*  DPDT_SEL_EN, clear 0x4C[23] */
-	rtl8723au_write8(padapter, REG_LEDCFG2, val);
-}
-
-void rtl8723a_init_default_value(struct rtw_adapter *padapter)
-{
-	struct hal_data_8723a *pHalData;
-	struct dm_priv *pdmpriv;
-	u8 i;
-
-	pHalData = GET_HAL_DATA(padapter);
-	pdmpriv = &pHalData->dmpriv;
-
-	/*  init default value */
-	pHalData->bIQKInitialized = false;
-	if (!padapter->pwrctrlpriv.bkeepfwalive)
-		pHalData->LastHMEBoxNum = 0;
-
-	pHalData->bIQKInitialized = false;
-
-	/*  init dm default value */
-	pdmpriv->TM_Trigger = 0;	/* for IQK */
-/*	pdmpriv->binitialized = false; */
-/*	pdmpriv->prv_traffic_idx = 3; */
-/*	pdmpriv->initialize = 0; */
-
-	pdmpriv->ThermalValue_HP_index = 0;
-	for (i = 0; i < HP_THERMAL_NUM; i++)
-		pdmpriv->ThermalValue_HP[i] = 0;
-
-	/*  init Efuse variables */
-	pHalData->EfuseUsedBytes = 0;
-	pHalData->BTEfuseUsedBytes = 0;
-}
-
-u8 GetEEPROMSize8723A(struct rtw_adapter *padapter)
-{
-	u8 size = 0;
-	u32 cr;
-
-	cr = rtl8723au_read16(padapter, REG_9346CR);
-	/*  6: EEPROM used is 93C46, 4: boot from E-Fuse. */
-	size = (cr & BOOT_FROM_EEPROM) ? 6 : 4;
-
-	MSG_8723A("EEPROM type is %s\n", size == 4 ? "E-FUSE" : "93C46");
-
-	return size;
-}
-
-/*  */
-/*  */
-/*  LLT R/W/Init function */
-/*  */
-/*  */
-static int _LLTWrite(struct rtw_adapter *padapter, u32 address, u32 data)
-{
-	int status = _SUCCESS;
-	s32 count = 0;
-	u32 value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) |
-		    _LLT_OP(_LLT_WRITE_ACCESS);
-	u16 LLTReg = REG_LLT_INIT;
-
-	rtl8723au_write32(padapter, LLTReg, value);
-
-	/* polling */
-	do {
-		value = rtl8723au_read32(padapter, LLTReg);
-		if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
-			break;
-
-		if (count > POLLING_LLT_THRESHOLD) {
-			RT_TRACE(_module_hal_init_c_, _drv_err_,
-				 "Failed to polling write LLT done at address %d!\n",
-				 address);
-			status = _FAIL;
-			break;
-		}
-	} while (count++);
-
-	return status;
-}
-
-int InitLLTTable23a(struct rtw_adapter *padapter, u32 boundary)
-{
-	int status = _SUCCESS;
-	u32 i;
-	u32 txpktbuf_bndy = boundary;
-	u32 Last_Entry_Of_TxPktBuf = LAST_ENTRY_OF_TX_PKT_BUFFER;
-
-	for (i = 0; i < (txpktbuf_bndy - 1); i++) {
-		status = _LLTWrite(padapter, i, i + 1);
-		if (status != _SUCCESS)
-			return status;
-	}
-
-	/*  end of list */
-	status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF);
-	if (status != _SUCCESS)
-		return status;
-
-	/*  Make the other pages as ring buffer */
-	/*  This ring buffer is used as beacon buffer if we config this
-	    MAC as two MAC transfer. */
-	/*  Otherwise used as local loopback buffer. */
-	for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) {
-		status = _LLTWrite(padapter, i, (i + 1));
-		if (_SUCCESS != status)
-			return status;
-	}
-
-	/*  Let last entry point to the start entry of ring buffer */
-	status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy);
-
-	return status;
-}
-
-static void _DisableGPIO(struct rtw_adapter *padapter)
-{
-/***************************************
-j. GPIO_PIN_CTRL 0x44[31:0]= 0x000
-k.Value = GPIO_PIN_CTRL[7:0]
-l. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); write external PIN level
-m. GPIO_MUXCFG 0x42 [15:0] = 0x0780
-n. LEDCFG 0x4C[15:0] = 0x8080
-***************************************/
-	u32 value32;
-	u32 u4bTmp;
-
-	/* 1. Disable GPIO[7:0] */
-	rtl8723au_write16(padapter, REG_GPIO_PIN_CTRL + 2, 0x0000);
-	value32 = rtl8723au_read32(padapter, REG_GPIO_PIN_CTRL) & 0xFFFF00FF;
-	u4bTmp = value32 & 0x000000FF;
-	value32 |= ((u4bTmp << 8) | 0x00FF0000);
-	rtl8723au_write32(padapter, REG_GPIO_PIN_CTRL, value32);
-
-	/*  */
-	/*  <Roger_Notes> For RTL8723u multi-function configuration which
-	    was autoload from Efuse offset 0x0a and 0x0b, */
-	/*  WLAN HW GPIO[9], GPS HW GPIO[10] and BT HW GPIO[11]. */
-	/*  Added by Roger, 2010.10.07. */
-	/*  */
-	/* 2. Disable GPIO[8] and GPIO[12] */
-
-	/*  Configure all pins as input mode. */
-	rtl8723au_write16(padapter, REG_GPIO_IO_SEL_2, 0x0000);
-	value32 = rtl8723au_read32(padapter, REG_GPIO_PIN_CTRL_2) & 0xFFFF001F;
-	u4bTmp = value32 & 0x0000001F;
-	/*  Set pin 8, 10, 11 and pin 12 to output mode. */
-	value32 |= ((u4bTmp << 8) | 0x001D0000);
-	rtl8723au_write32(padapter, REG_GPIO_PIN_CTRL_2, value32);
-
-	/* 3. Disable LED0 & 1 */
-	rtl8723au_write16(padapter, REG_LEDCFG0, 0x8080);
-}				/* end of _DisableGPIO() */
-
-static void _DisableRFAFEAndResetBB8192C(struct rtw_adapter *padapter)
-{
-/**************************************
-a.	TXPAUSE 0x522[7:0] = 0xFF		Pause MAC TX queue
-b.	RF path 0 offset 0x00 = 0x00		disable RF
-c.	APSD_CTRL 0x600[7:0] = 0x40
-d.	SYS_FUNC_EN 0x02[7:0] = 0x16		reset BB state machine
-e.	SYS_FUNC_EN 0x02[7:0] = 0x14		reset BB state machine
-***************************************/
-	u8 value8;
-
-	rtl8723au_write8(padapter, REG_TXPAUSE, 0xFF);
-
-	PHY_SetRFReg(padapter, RF_PATH_A, 0x0, bMaskByte0, 0x0);
-
-	value8 = APSDOFF;
-	rtl8723au_write8(padapter, REG_APSD_CTRL, value8);	/* 0x40 */
-
-	/*  Set BB reset at first */
-	value8 = FEN_USBD | FEN_USBA | FEN_BB_GLB_RSTn;
-	rtl8723au_write8(padapter, REG_SYS_FUNC_EN, value8);	/* 0x16 */
-
-	/*  Set global reset. */
-	value8 &= ~FEN_BB_GLB_RSTn;
-	rtl8723au_write8(padapter, REG_SYS_FUNC_EN, value8);	/* 0x14 */
-
-	/*  2010/08/12 MH We need to set BB/GLBAL reset to save power
-	    for SS mode. */
-}
-
-static void _ResetDigitalProcedure1_92C(struct rtw_adapter *padapter,
-					bool bWithoutHWSM)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	if (IS_FW_81xxC(padapter) && (pHalData->FirmwareVersion <= 0x20)) {
-	/*****************************
-	f.	MCUFWDL 0x80[7:0]= 0		reset MCU ready status
-	g.	SYS_FUNC_EN 0x02[10]= 0		reset MCU register, (8051 reset)
-	h.	SYS_FUNC_EN 0x02[15-12]= 5	reset MAC register, DCORE
-	i.     SYS_FUNC_EN 0x02[10]= 1		enable MCU register,
-						(8051 enable)
-	******************************/
-		u16 valu16;
-		rtl8723au_write8(padapter, REG_MCUFWDL, 0);
-
-		valu16 = rtl8723au_read16(padapter, REG_SYS_FUNC_EN);
-		/* reset MCU , 8051 */
-		rtl8723au_write16(padapter, REG_SYS_FUNC_EN,
-				  valu16 & ~FEN_CPUEN);
-
-		valu16 = rtl8723au_read16(padapter, REG_SYS_FUNC_EN) & 0x0FFF;
-		/* reset MAC */
-		rtl8723au_write16(padapter, REG_SYS_FUNC_EN,
-				  valu16 | FEN_HWPDN | FEN_ELDR);
-
-		valu16 = rtl8723au_read16(padapter, REG_SYS_FUNC_EN);
-		/* enable MCU , 8051 */
-		rtl8723au_write16(padapter, REG_SYS_FUNC_EN,
-				  valu16 | FEN_CPUEN);
-	} else {
-		u8 retry_cnts = 0;
-		u8 val8;
-
-		val8 = rtl8723au_read8(padapter, REG_MCUFWDL);
-
-		/*  2010/08/12 MH For USB SS, we can not stop 8051 when we
-		    are trying to enter IPS/HW&SW radio off. For
-		    S3/S4/S5/Disable, we can stop 8051 because */
-		/*  we will init FW when power on again. */
-		/*  If we want to SS mode, we can not reset 8051. */
-		if ((val8 & BIT(1)) && padapter->bFWReady) {
-			/* IF fw in RAM code, do reset */
-			/*  2010/08/25 MH According to RD alfred's
-			    suggestion, we need to disable other */
-			/*  HRCV INT to influence 8051 reset. */
-			rtl8723au_write8(padapter, REG_FWIMR, 0x20);
-			/*  2011/02/15 MH According to Alex's
-			    suggestion, close mask to prevent
-			    incorrect FW write operation. */
-			rtl8723au_write8(padapter, REG_FTIMR, 0x00);
-			rtl8723au_write8(padapter, REG_FSIMR, 0x00);
-
-			/* 8051 reset by self */
-			rtl8723au_write8(padapter, REG_HMETFR + 3, 0x20);
-
-			while ((retry_cnts++ < 100) &&
-			       (rtl8723au_read16(padapter, REG_SYS_FUNC_EN) &
-				FEN_CPUEN)) {
-				udelay(50);	/* us */
-			}
-
-			if (retry_cnts >= 100) {
-				/* Reset MAC and Enable 8051 */
-				rtl8723au_write8(padapter,
-						 REG_SYS_FUNC_EN + 1, 0x50);
-				mdelay(10);
-			}
-		}
-		/* Reset MAC and Enable 8051 */
-		rtl8723au_write8(padapter, REG_SYS_FUNC_EN + 1, 0x54);
-		rtl8723au_write8(padapter, REG_MCUFWDL, 0);
-	}
-
-	if (bWithoutHWSM) {
-	/*****************************
-		Without HW auto state machine
-	g.	SYS_CLKR 0x08[15:0] = 0x30A3		disable MAC clock
-	h.	AFE_PLL_CTRL 0x28[7:0] = 0x80		disable AFE PLL
-	i.	AFE_XTAL_CTRL 0x24[15:0] = 0x880F	gated AFE DIG_CLOCK
-	j.	SYS_ISO_CTRL 0x00[7:0] = 0xF9		isolated digital to PON
-	******************************/
-		/* modify to 0x70A3 by Scott. */
-		rtl8723au_write16(padapter, REG_SYS_CLKR, 0x70A3);
-		rtl8723au_write8(padapter, REG_AFE_PLL_CTRL, 0x80);
-		rtl8723au_write16(padapter, REG_AFE_XTAL_CTRL, 0x880F);
-		rtl8723au_write8(padapter, REG_SYS_ISO_CTRL, 0xF9);
-	} else {
-		/*  Disable all RF/BB power */
-		rtl8723au_write8(padapter, REG_RF_CTRL, 0x00);
-	}
-}
-
-static void _ResetDigitalProcedure2(struct rtw_adapter *padapter)
-{
-/*****************************
-k.	SYS_FUNC_EN 0x03[7:0] = 0x44		disable ELDR runction
-l.	SYS_CLKR 0x08[15:0] = 0x3083		disable ELDR clock
-m.	SYS_ISO_CTRL 0x01[7:0] = 0x83		isolated ELDR to PON
-******************************/
-	/* modify to 0x70a3 by Scott. */
-	rtl8723au_write16(padapter, REG_SYS_CLKR, 0x70a3);
-	/* modify to 0x82 by Scott. */
-	rtl8723au_write8(padapter, REG_SYS_ISO_CTRL + 1, 0x82);
-}
-
-static void _DisableAnalog(struct rtw_adapter *padapter, bool bWithoutHWSM)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	u16 value16;
-	u8 value8;
-
-	if (bWithoutHWSM) {
-	/*****************************
-	n.	LDOA15_CTRL 0x20[7:0] = 0x04	disable A15 power
-	o.	LDOV12D_CTRL 0x21[7:0] = 0x54	disable digital core power
-	r.	When driver call disable, the ASIC will turn off remaining
-		clock automatically
-	******************************/
-
-		rtl8723au_write8(padapter, REG_LDOA15_CTRL, 0x04);
-		/* rtl8723au_write8(padapter, REG_LDOV12D_CTRL, 0x54); */
-
-		value8 = rtl8723au_read8(padapter, REG_LDOV12D_CTRL);
-		value8 &= ~LDV12_EN;
-		rtl8723au_write8(padapter, REG_LDOV12D_CTRL, value8);
-	}
-
-	/*****************************
-	h.	SPS0_CTRL 0x11[7:0] = 0x23		enter PFM mode
-	i.	APS_FSMCO 0x04[15:0] = 0x4802		set USB suspend
-	******************************/
-	value8 = 0x23;
-	if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID))
-		value8 |= BIT(3);
-
-	rtl8723au_write8(padapter, REG_SPS0_CTRL, value8);
-
-	if (bWithoutHWSM) {
-		/* value16 |= (APDM_HOST | FSM_HSUS |/PFM_ALDN); */
-		/*  2010/08/31 According to Filen description, we need to
-		    use HW to shut down 8051 automatically. */
-		/*  Because suspend operation need the asistance of 8051
-		    to wait for 3ms. */
-		value16 = APDM_HOST | AFSM_HSUS | PFM_ALDN;
-	} else {
-		value16 = APDM_HOST | AFSM_HSUS | PFM_ALDN;
-	}
-
-	rtl8723au_write16(padapter, REG_APS_FSMCO, value16);	/* 0x4802 */
-
-	rtl8723au_write8(padapter, REG_RSV_CTRL, 0x0e);
-}
-
-/*  HW Auto state machine */
-int CardDisableHWSM(struct rtw_adapter *padapter, u8 resetMCU)
-{
-	if (padapter->bSurpriseRemoved)
-		return _SUCCESS;
-
-	/*  RF Off Sequence ==== */
-	_DisableRFAFEAndResetBB8192C(padapter);
-
-	/*   ==== Reset digital sequence   ====== */
-	_ResetDigitalProcedure1_92C(padapter, false);
-
-	/*   ==== Pull GPIO PIN to balance level and LED control ====== */
-	_DisableGPIO(padapter);
-
-	/*   ==== Disable analog sequence === */
-	_DisableAnalog(padapter, false);
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "======> Card disable finished.\n");
-
-	return _SUCCESS;
-}
-
-/*  without HW Auto state machine */
-int CardDisableWithoutHWSM(struct rtw_adapter *padapter)
-{
-	if (padapter->bSurpriseRemoved)
-		return _SUCCESS;
-
-	/*  RF Off Sequence ==== */
-	_DisableRFAFEAndResetBB8192C(padapter);
-
-	/*   ==== Reset digital sequence   ====== */
-	_ResetDigitalProcedure1_92C(padapter, true);
-
-	/*   ==== Pull GPIO PIN to balance level and LED control ====== */
-	_DisableGPIO(padapter);
-
-	/*   ==== Reset digital sequence   ====== */
-	_ResetDigitalProcedure2(padapter);
-
-	/*   ==== Disable analog sequence === */
-	_DisableAnalog(padapter, true);
-
-	return _SUCCESS;
-}
-
-void Hal_InitPGData(struct rtw_adapter *padapter, u8 *PROMContent)
-{
-	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
-
-	if (!pEEPROM->bautoload_fail_flag) {	/*  autoload OK. */
-		if (!pEEPROM->EepromOrEfuse) {
-			/*  Read EFUSE real map to shadow. */
-			EFUSE_ShadowMapUpdate23a(padapter, EFUSE_WIFI);
-			memcpy(PROMContent, pEEPROM->efuse_eeprom_data,
-			       HWSET_MAX_SIZE);
-		}
-	} else {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
-			 "AutoLoad Fail reported from CR9346!!\n");
-		/* update to default value 0xFF */
-		if (!pEEPROM->EepromOrEfuse)
-			EFUSE_ShadowMapUpdate23a(padapter, EFUSE_WIFI);
-		memcpy(PROMContent, pEEPROM->efuse_eeprom_data,
-		       HWSET_MAX_SIZE);
-	}
-}
-
-void Hal_EfuseParseIDCode(struct rtw_adapter *padapter, u8 *hwinfo)
-{
-	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
-/*	struct hal_data_8723a	*pHalData = GET_HAL_DATA(padapter); */
-	u16 EEPROMId;
-
-	/*  Checl 0x8129 again for making sure autoload status!! */
-	EEPROMId = le16_to_cpu(*((__le16 *) hwinfo));
-	if (EEPROMId != RTL_EEPROM_ID) {
-		DBG_8723A("EEPROM ID(%#x) is invalid!!\n", EEPROMId);
-		pEEPROM->bautoload_fail_flag = true;
-	} else {
-		pEEPROM->bautoload_fail_flag = false;
-	}
-
-	RT_TRACE(_module_hal_init_c_, _drv_info_,
-		 "EEPROM ID = 0x%04x\n", EEPROMId);
-}
-
-static void
-Hal_ReadPowerValueFromPROM_8723A(struct txpowerinfo *pwrInfo,
-				 u8 *PROMContent, bool AutoLoadFail)
-{
-	u32 rfPath, eeAddr, group, rfPathMax = 1;
-
-	memset(pwrInfo, 0, sizeof(*pwrInfo));
-
-	if (AutoLoadFail) {
-		for (group = 0; group < MAX_CHNL_GROUP; group++) {
-			for (rfPath = 0; rfPath < rfPathMax; rfPath++) {
-				pwrInfo->CCKIndex[rfPath][group] =
-					EEPROM_Default_TxPowerLevel;
-				pwrInfo->HT40_1SIndex[rfPath][group] =
-					EEPROM_Default_TxPowerLevel;
-				pwrInfo->HT40_2SIndexDiff[rfPath][group] =
-					EEPROM_Default_HT40_2SDiff;
-				pwrInfo->HT20IndexDiff[rfPath][group] =
-					EEPROM_Default_HT20_Diff;
-				pwrInfo->OFDMIndexDiff[rfPath][group] =
-					EEPROM_Default_LegacyHTTxPowerDiff;
-				pwrInfo->HT40MaxOffset[rfPath][group] =
-					EEPROM_Default_HT40_PwrMaxOffset;
-				pwrInfo->HT20MaxOffset[rfPath][group] =
-					EEPROM_Default_HT20_PwrMaxOffset;
-			}
-		}
-		pwrInfo->TSSI_A[0] = EEPROM_Default_TSSI;
-		return;
-	}
-
-	for (rfPath = 0; rfPath < rfPathMax; rfPath++) {
-		for (group = 0; group < MAX_CHNL_GROUP; group++) {
-			eeAddr =
-			    EEPROM_CCK_TX_PWR_INX_8723A + (rfPath * 3) + group;
-
-			pwrInfo->CCKIndex[rfPath][group] = PROMContent[eeAddr];
-			if (pwrInfo->CCKIndex[rfPath][group] > 63)
-				pwrInfo->CCKIndex[rfPath][group] =
-					EEPROM_Default_TxPowerLevel;
-
-			eeAddr = EEPROM_HT40_1S_TX_PWR_INX_8723A +
-				(rfPath * 3) + group;
-			pwrInfo->HT40_1SIndex[rfPath][group] =
-				PROMContent[eeAddr];
-			if (pwrInfo->HT40_1SIndex[rfPath][group] > 63)
-				pwrInfo->HT40_1SIndex[rfPath][group] =
-					EEPROM_Default_TxPowerLevel;
-		}
-	}
-
-	for (group = 0; group < MAX_CHNL_GROUP; group++) {
-		for (rfPath = 0; rfPath < rfPathMax; rfPath++) {
-			pwrInfo->HT40_2SIndexDiff[rfPath][group] = 0;
-			pwrInfo->HT20IndexDiff[rfPath][group] =
-				(PROMContent
-				 [EEPROM_HT20_TX_PWR_INX_DIFF_8723A +
-				  group] >> (rfPath * 4)) & 0xF;
-			/* 4bit sign number to 8 bit sign number */
-			if (pwrInfo->HT20IndexDiff[rfPath][group] & BIT(3))
-				pwrInfo->HT20IndexDiff[rfPath][group] |= 0xF0;
-
-			pwrInfo->OFDMIndexDiff[rfPath][group] =
-				(PROMContent[EEPROM_OFDM_TX_PWR_INX_DIFF_8723A +
-					     group] >> (rfPath * 4)) & 0xF;
-
-			pwrInfo->HT40MaxOffset[rfPath][group] =
-				(PROMContent[EEPROM_HT40_MAX_PWR_OFFSET_8723A +
-					     group] >> (rfPath * 4)) & 0xF;
-
-			pwrInfo->HT20MaxOffset[rfPath][group] =
-				(PROMContent[EEPROM_HT20_MAX_PWR_OFFSET_8723A +
-					     group] >> (rfPath * 4)) & 0xF;
-		}
-	}
-
-	pwrInfo->TSSI_A[0] = PROMContent[EEPROM_TSSI_A_8723A];
-}
-
-static u8 Hal_GetChnlGroup(u8 chnl)
-{
-	u8 group = 0;
-
-	if (chnl < 3)		/*  Cjanel 1-3 */
-		group = 0;
-	else if (chnl < 9)	/*  Channel 4-9 */
-		group = 1;
-	else			/*  Channel 10-14 */
-		group = 2;
-
-	return group;
-}
-
-void
-Hal_EfuseParsetxpowerinfo_8723A(struct rtw_adapter *padapter,
-				u8 *PROMContent, bool AutoLoadFail)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	struct txpowerinfo pwrInfo;
-	u8 rfPath, ch, group, rfPathMax = 1;
-	u8 pwr, diff;
-
-	Hal_ReadPowerValueFromPROM_8723A(&pwrInfo, PROMContent, AutoLoadFail);
-	for (rfPath = 0; rfPath < rfPathMax; rfPath++) {
-		for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
-			group = Hal_GetChnlGroup(ch);
-
-			pHalData->TxPwrLevelCck[rfPath][ch] =
-				pwrInfo.CCKIndex[rfPath][group];
-			pHalData->TxPwrLevelHT40_1S[rfPath][ch] =
-				pwrInfo.HT40_1SIndex[rfPath][group];
-
-			pHalData->TxPwrHt20Diff[rfPath][ch] =
-				pwrInfo.HT20IndexDiff[rfPath][group];
-			pHalData->TxPwrLegacyHtDiff[rfPath][ch] =
-				pwrInfo.OFDMIndexDiff[rfPath][group];
-			pHalData->PwrGroupHT20[rfPath][ch] =
-				pwrInfo.HT20MaxOffset[rfPath][group];
-			pHalData->PwrGroupHT40[rfPath][ch] =
-				pwrInfo.HT40MaxOffset[rfPath][group];
-
-			pwr = pwrInfo.HT40_1SIndex[rfPath][group];
-			diff = pwrInfo.HT40_2SIndexDiff[rfPath][group];
-
-			pHalData->TxPwrLevelHT40_2S[rfPath][ch] =
-			    (pwr > diff) ? (pwr - diff) : 0;
-		}
-	}
-	for (rfPath = 0; rfPath < RF_PATH_MAX; rfPath++) {
-		for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
-			RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-				 "RF(%u)-Ch(%u) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n",
-				 rfPath, ch,
-				 pHalData->TxPwrLevelCck[rfPath][ch],
-				 pHalData->TxPwrLevelHT40_1S[rfPath][ch],
-				 pHalData->TxPwrLevelHT40_2S[rfPath][ch]);
-
-		}
-	}
-	for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-			 "RF-A Ht20 to HT40 Diff[%u] = 0x%x(%d)\n", ch,
-			 pHalData->TxPwrHt20Diff[RF_PATH_A][ch],
-			 pHalData->TxPwrHt20Diff[RF_PATH_A][ch]);
-	}
-	for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++)
-		RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-			 "RF-A Legacy to Ht40 Diff[%u] = 0x%x\n", ch,
-			 pHalData->TxPwrLegacyHtDiff[RF_PATH_A][ch]);
-	for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-			 "RF-B Ht20 to HT40 Diff[%u] = 0x%x(%d)\n", ch,
-			 pHalData->TxPwrHt20Diff[RF_PATH_B][ch],
-			 pHalData->TxPwrHt20Diff[RF_PATH_B][ch]);
-	}
-	for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++)
-		RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-			 "RF-B Legacy to HT40 Diff[%u] = 0x%x\n", ch,
-			 pHalData->TxPwrLegacyHtDiff[RF_PATH_B][ch]);
-	if (!AutoLoadFail) {
-		struct registry_priv *registry_par = &padapter->registrypriv;
-		if (registry_par->regulatory_tid == 0xff) {
-			if (PROMContent[RF_OPTION1_8723A] == 0xff)
-				pHalData->EEPROMRegulatory = 0;
-			else
-				pHalData->EEPROMRegulatory =
-					PROMContent[RF_OPTION1_8723A] & 0x7;
-		} else {
-			pHalData->EEPROMRegulatory =
-			    registry_par->regulatory_tid;
-		}
-	} else {
-		pHalData->EEPROMRegulatory = 0;
-	}
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory);
-
-	if (!AutoLoadFail)
-		pHalData->bTXPowerDataReadFromEEPORM = true;
-}
-
-void
-Hal_EfuseParseBTCoexistInfo_8723A(struct rtw_adapter *padapter,
-				  u8 *hwinfo, bool AutoLoadFail)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	u8 tempval;
-	u32 tmpu4;
-
-	if (!AutoLoadFail) {
-		tmpu4 = rtl8723au_read32(padapter, REG_MULTI_FUNC_CTRL);
-		if (tmpu4 & BT_FUNC_EN)
-			pHalData->EEPROMBluetoothCoexist = 1;
-		else
-			pHalData->EEPROMBluetoothCoexist = 0;
-		pHalData->EEPROMBluetoothType = BT_RTL8723A;
-
-		/*  The following need to be checked with newer version of */
-		/*  eeprom spec */
-		tempval = hwinfo[RF_OPTION4_8723A];
-		pHalData->EEPROMBluetoothAntNum = (tempval & 0x1);
-		pHalData->EEPROMBluetoothAntIsolation = (tempval & 0x10) >> 4;
-		pHalData->EEPROMBluetoothRadioShared = (tempval & 0x20) >> 5;
-	} else {
-		pHalData->EEPROMBluetoothCoexist = 0;
-		pHalData->EEPROMBluetoothType = BT_RTL8723A;
-		pHalData->EEPROMBluetoothAntNum = Ant_x2;
-		pHalData->EEPROMBluetoothAntIsolation = 0;
-		pHalData->EEPROMBluetoothRadioShared = BT_Radio_Shared;
-	}
-
-	rtl8723a_BT_init_hal_vars(padapter);
-}
-
-void
-Hal_EfuseParseEEPROMVer(struct rtw_adapter *padapter,
-			u8 *hwinfo, bool AutoLoadFail)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	if (!AutoLoadFail)
-		pHalData->EEPROMVersion = hwinfo[EEPROM_VERSION_8723A];
-	else
-		pHalData->EEPROMVersion = 1;
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "Hal_EfuseParseEEPROMVer(), EEVer = %d\n",
-		 pHalData->EEPROMVersion);
-}
-
-void
-rtl8723a_EfuseParseChnlPlan(struct rtw_adapter *padapter,
-			    u8 *hwinfo, bool AutoLoadFail)
-{
-	padapter->mlmepriv.ChannelPlan =
-		hal_com_get_channel_plan23a(padapter, hwinfo ?
-					 hwinfo[EEPROM_ChannelPlan_8723A]:0xFF,
-					 padapter->registrypriv.channel_plan,
-					 RT_CHANNEL_DOMAIN_WORLD_WIDE_13,
-					 AutoLoadFail);
-
-	DBG_8723A("mlmepriv.ChannelPlan = 0x%02x\n",
-		  padapter->mlmepriv.ChannelPlan);
-}
-
-void
-Hal_EfuseParseCustomerID(struct rtw_adapter *padapter,
-			 u8 *hwinfo, bool AutoLoadFail)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	if (!AutoLoadFail) {
-		pHalData->EEPROMCustomerID = hwinfo[EEPROM_CustomID_8723A];
-		pHalData->EEPROMSubCustomerID =
-		    hwinfo[EEPROM_SubCustomID_8723A];
-	} else {
-		pHalData->EEPROMCustomerID = 0;
-		pHalData->EEPROMSubCustomerID = 0;
-	}
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "EEPROM Customer ID: 0x%2x\n", pHalData->EEPROMCustomerID);
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "EEPROM SubCustomer ID: 0x%02x\n",
-		 pHalData->EEPROMSubCustomerID);
-}
-
-void
-Hal_EfuseParseAntennaDiversity(struct rtw_adapter *padapter,
-			       u8 *hwinfo, bool AutoLoadFail)
-{
-}
-
-void
-Hal_EfuseParseRateIndicationOption(struct rtw_adapter *padapter,
-				   u8 *hwinfo, bool AutoLoadFail)
-{
-}
-
-void
-Hal_EfuseParseXtal_8723A(struct rtw_adapter *pAdapter,
-			 u8 *hwinfo, u8 AutoLoadFail)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(pAdapter);
-
-	if (!AutoLoadFail) {
-		pHalData->CrystalCap = hwinfo[EEPROM_XTAL_K_8723A];
-		if (pHalData->CrystalCap == 0xFF)
-			pHalData->CrystalCap = EEPROM_Default_CrystalCap_8723A;
-	} else {
-		pHalData->CrystalCap = EEPROM_Default_CrystalCap_8723A;
-	}
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 "%s: CrystalCap = 0x%2x\n", __func__,
-		 pHalData->CrystalCap);
-}
-
-void
-Hal_EfuseParseThermalMeter_8723A(struct rtw_adapter *padapter,
-				 u8 *PROMContent, bool AutoloadFail)
-{
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-
-	/*  */
-	/*  ThermalMeter from EEPROM */
-	/*  */
-	if (!AutoloadFail)
-		pHalData->EEPROMThermalMeter =
-		    PROMContent[EEPROM_THERMAL_METER_8723A];
-	else
-		pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
-
-	if ((pHalData->EEPROMThermalMeter == 0xff) || AutoloadFail) {
-		pHalData->bAPKThermalMeterIgnore = true;
-		pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
-	}
-
-	DBG_8723A("%s: ThermalMeter = 0x%x\n", __func__,
-		  pHalData->EEPROMThermalMeter);
-}
-
-static void rtl8723a_cal_txdesc_chksum(struct tx_desc *ptxdesc)
-{
-	__le16 *usPtr = (__le16 *)ptxdesc;
-	u32 count = 16;		/*  (32 bytes / 2 bytes per XOR) => 16 times */
-	u32 index;
-	u16 checksum = 0;
-
-	/*  Clear first */
-	ptxdesc->txdw7 &= cpu_to_le32(0xffff0000);
-
-	for (index = 0; index < count; index++)
-		checksum ^= le16_to_cpu(usPtr[index]);
-
-	ptxdesc->txdw7 |= cpu_to_le32(checksum & 0x0000ffff);
-}
-
-/*
- *  Description: In normal chip, we should send some packet to Hw which
- *  will be used by Fw in FW LPS mode. The function is to fill the Tx
- * descriptor of this packets, then
- */
-/*			Fw can tell Hw to send these packet derectly. */
-/*  Added by tynli. 2009.10.15. */
-/*  */
-void rtl8723a_fill_fake_txdesc(struct rtw_adapter *padapter, u8 *pDesc,
-			       u32 BufferLen, u8 IsPsPoll, u8 IsBTQosNull)
-{
-	struct tx_desc *ptxdesc;
-
-	/*  Clear all status */
-	ptxdesc = (struct tx_desc *)pDesc;
-	memset(pDesc, 0, TXDESC_SIZE);
-
-	/* offset 0 */
-	/* own, bFirstSeg, bLastSeg; */
-	ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
-
-	/* 32 bytes for TX Desc */
-	ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE + OFFSET_SZ) <<
-				       OFFSET_SHT) & 0x00ff0000);
-
-	/*  Buffer size + command header */
-	ptxdesc->txdw0 |= cpu_to_le32(BufferLen & 0x0000ffff);
-
-	/* offset 4 */
-	/*  Fixed queue of Mgnt queue */
-	ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT << QSEL_SHT) & 0x00001f00);
-
-	/* Set NAVUSEHDR to prevent Ps-poll AId filed to be changed
-	   to error vlaue by Hw. */
-	if (IsPsPoll) {
-		ptxdesc->txdw1 |= cpu_to_le32(NAVUSEHDR);
-	} else {
-		/*  Hw set sequence number */
-		ptxdesc->txdw4 |= cpu_to_le32(BIT(7));
-		/* set bit3 to 1. Suugested by TimChen. 2009.12.29. */
-		ptxdesc->txdw3 |= cpu_to_le32((8 << 28));
-	}
-
-	if (true == IsBTQosNull)
-		ptxdesc->txdw2 |= cpu_to_le32(BIT(23));	/*  BT NULL */
-
-	/* offset 16 */
-	ptxdesc->txdw4 |= cpu_to_le32(BIT(8));	/* driver uses rate */
-
-	/*  USB interface drop packet if the checksum of descriptor isn't
-	    correct. */
-	/*  Using this checksum can let hardware recovery from packet bulk
-	    out error (e.g. Cancel URC, Bulk out error.). */
-	rtl8723a_cal_txdesc_chksum(ptxdesc);
-}
-
-void hw_var_set_opmode(struct rtw_adapter *padapter, u8 mode)
-{
-	u8 val8;
-
-	if (mode == MSR_INFRA || mode == MSR_NOLINK) {
-		StopTxBeacon(padapter);
-
-		/*  disable atim wnd */
-		val8 = DIS_TSF_UDT | EN_BCN_FUNCTION | DIS_ATIM;
-		SetBcnCtrlReg23a(padapter, val8, ~val8);
-	} else if (mode == MSR_ADHOC) {
-		ResumeTxBeacon(padapter);
-
-		val8 = DIS_TSF_UDT | EN_BCN_FUNCTION | DIS_BCNQ_SUB;
-		SetBcnCtrlReg23a(padapter, val8, ~val8);
-	} else if (mode == MSR_AP) {
-		/*  add NULL Data and BT NULL Data Packets to FW RSVD Page */
-		rtl8723a_set_BTCoex_AP_mode_FwRsvdPkt_cmd(padapter);
-
-		ResumeTxBeacon(padapter);
-
-		val8 = DIS_TSF_UDT | DIS_BCNQ_SUB;
-		SetBcnCtrlReg23a(padapter, val8, ~val8);
-
-		/*  Set RCR */
-		/* rtl8723au_write32(padapter, REG_RCR, 0x70002a8e);
-		   CBSSID_DATA must set to 0 */
-		/* CBSSID_DATA must set to 0 */
-		rtl8723au_write32(padapter, REG_RCR, 0x7000228e);
-		/*  enable to rx data frame */
-		rtl8723au_write16(padapter, REG_RXFLTMAP2, 0xFFFF);
-		/*  enable to rx ps-poll */
-		rtl8723au_write16(padapter, REG_RXFLTMAP1, 0x0400);
-
-		/*  Beacon Control related register for first time */
-		/*  2ms */
-		rtl8723au_write8(padapter, REG_BCNDMATIM, 0x02);
-		/*  5ms */
-		rtl8723au_write8(padapter, REG_DRVERLYINT, 0x05);
-		/*  10ms for port0 */
-		rtl8723au_write8(padapter, REG_ATIMWND, 0x0a);
-		rtl8723au_write16(padapter, REG_BCNTCFG, 0x00);
-		rtl8723au_write16(padapter, REG_TBTT_PROHIBIT, 0xff04);
-		/*  +32767 (~32ms) */
-		rtl8723au_write16(padapter, REG_TSFTR_SYN_OFFSET, 0x7fff);
-
-		/*  reset TSF */
-		rtl8723au_write8(padapter, REG_DUAL_TSF_RST, BIT(0));
-
-		/*  enable BCN Function */
-		/*  don't enable update TSF (due to TSF update when
-		    beacon/probe rsp are received) */
-		val8 = DIS_TSF_UDT | EN_BCN_FUNCTION |
-		       EN_TXBCN_RPT | DIS_BCNQ_SUB;
-		SetBcnCtrlReg23a(padapter, val8, ~val8);
-	}
-
-	val8 = rtl8723au_read8(padapter, MSR);
-	val8 = (val8 & 0xC) | mode;
-	rtl8723au_write8(padapter, MSR, val8);
-}
-
-void hw_var_set_macaddr(struct rtw_adapter *padapter, u8 *val)
-{
-	u8 idx = 0;
-	u32 reg_macid;
-
-	reg_macid = REG_MACID;
-
-	for (idx = 0; idx < 6; idx++)
-		rtl8723au_write8(padapter, (reg_macid + idx), val[idx]);
-}
-
-void hw_var_set_bssid(struct rtw_adapter *padapter, u8 *val)
-{
-	u8 idx = 0;
-	u32 reg_bssid;
-
-	reg_bssid = REG_BSSID;
-
-	for (idx = 0; idx < 6; idx++)
-		rtl8723au_write8(padapter, (reg_bssid + idx), val[idx]);
-}
-
-void hw_var_set_correct_tsf(struct rtw_adapter *padapter)
-{
-	u64 tsf;
-	u32 reg_tsftr;
-	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
-	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-
-	/* tsf = pmlmeext->TSFValue - ((u32)pmlmeext->TSFValue %
-	   (pmlmeinfo->bcn_interval*1024)) - 1024; us */
-	tsf = pmlmeext->TSFValue -
-		do_div(pmlmeext->TSFValue,
-		       (pmlmeinfo->bcn_interval * 1024)) - 1024;	/* us */
-
-	if (((pmlmeinfo->state & 0x03) == MSR_ADHOC) ||
-	    ((pmlmeinfo->state & 0x03) == MSR_AP)) {
-		/* pHalData->RegTxPause |= STOP_BCNQ;BIT(6) */
-		/* rtl8723au_write8(padapter, REG_TXPAUSE,
-		   (rtl8723au_read8(Adapter, REG_TXPAUSE)|BIT(6))); */
-		StopTxBeacon(padapter);
-	}
-
-	reg_tsftr = REG_TSFTR;
-
-	/*  disable related TSF function */
-	SetBcnCtrlReg23a(padapter, 0, EN_BCN_FUNCTION);
-
-	rtl8723au_write32(padapter, reg_tsftr, tsf);
-	rtl8723au_write32(padapter, reg_tsftr + 4, tsf >> 32);
-
-	/* enable related TSF function */
-	SetBcnCtrlReg23a(padapter, EN_BCN_FUNCTION, 0);
-
-	if (((pmlmeinfo->state & 0x03) == MSR_ADHOC) ||
-	    ((pmlmeinfo->state & 0x03) == MSR_AP))
-		ResumeTxBeacon(padapter);
-}
-
-void hw_var_set_mlme_disconnect(struct rtw_adapter *padapter)
-{
-	/*  reject all data frames */
-	rtl8723au_write16(padapter, REG_RXFLTMAP2, 0);
-
-	/*  reset TSF */
-	rtl8723au_write8(padapter, REG_DUAL_TSF_RST, BIT(0));
-
-	/*  disable update TSF */
-	SetBcnCtrlReg23a(padapter, DIS_TSF_UDT, 0);
-}
-
-void hw_var_set_mlme_join(struct rtw_adapter *padapter, u8 type)
-{
-	u8 RetryLimit = 0x30;
-
-	struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
-	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
-
-	if (type == 0) {	/*  prepare to join */
-		u32 v32;
-
-		/*  enable to rx data frame.Accept all data frame */
-		/* rtl8723au_write32(padapter, REG_RCR,
-		   rtl8723au_read32(padapter, REG_RCR)|RCR_ADF); */
-		rtl8723au_write16(padapter, REG_RXFLTMAP2, 0xFFFF);
-
-		v32 = rtl8723au_read32(padapter, REG_RCR);
-		v32 |= RCR_CBSSID_DATA | RCR_CBSSID_BCN;
-		rtl8723au_write32(padapter, REG_RCR, v32);
-
-		if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == true)
-			RetryLimit =
-			    (pHalData->CustomerID == RT_CID_CCX) ? 7 : 48;
-		else		/*  Ad-hoc Mode */
-			RetryLimit = 0x7;
-	} else if (type == 1) {	/*  joinbss_event callback when join res < 0 */
-		/*  config RCR to receive different BSSID & not to
-		    receive data frame during linking */
-		rtl8723au_write16(padapter, REG_RXFLTMAP2, 0);
-	} else if (type == 2) {	/*  sta add event callback */
-		/*  enable update TSF */
-		SetBcnCtrlReg23a(padapter, 0, DIS_TSF_UDT);
-
-		if (check_fwstate(pmlmepriv,
-				  WIFI_ADHOC_STATE | WIFI_ADHOC_MASTER_STATE)) {
-			/*  fixed beacon issue for 8191su........... */
-			rtl8723au_write8(padapter, 0x542, 0x02);
-			RetryLimit = 0x7;
-		}
-	}
-
-	rtl8723au_write16(padapter, REG_RL,
-			  RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit <<
-			  RETRY_LIMIT_LONG_SHIFT);
-
-	switch (type) {
-	case 0:
-		/*  prepare to join */
-		rtl8723a_BT_wifiassociate_notify(padapter, true);
-		break;
-	case 1:
-		/*  joinbss_event callback when join res < 0 */
-		rtl8723a_BT_wifiassociate_notify(padapter, false);
-		break;
-	case 2:
-		/*  sta add event callback */
-/*		BT_WifiMediaStatusNotify(padapter, RT_MEDIA_CONNECT); */
-		break;
-	}
-}