Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...

1 files changed, 22 insertions, 11 deletions

diff --git a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
index 2e9120a..11bcfb7 100644
--- a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
+++ b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
@@ -82,7 +82,8 @@
  * 3. Page8(0x800)
  */
 #define	rFPGA0_RFMOD			0x800	/*RF mode & CCK TxSC RF
-						 * BW Setting?? */
+						 * BW Setting??
+						 */
 #define	rFPGA0_TxInfo			0x804	/* Status report?? */
 #define	rFPGA0_PSDFunction		0x808
 #define	rFPGA0_TxGainStage		0x80c	/* Set TX PWR init gain? */
@@ -119,7 +120,8 @@
 
 #define	rFPGA0_AnalogParameter1		0x880	/* Crystal cap setting
 						 * RF-R/W protection
-						 * for parameter4?? */
+						 * for parameter4??
+						 */
 #define	rFPGA0_AnalogParameter2		0x884
 #define	rFPGA0_AnalogParameter3		0x888	/* Useless now */
 #define	rFPGA0_AnalogParameter4		0x88c
@@ -146,7 +148,8 @@
  * 5. PageA(0xA00)
  *
  * Set Control channel to upper or lower.
- * These settings are required only for 40MHz */
+ * These settings are required only for 40MHz
+ */
 #define	rCCK0_System			0xa00
 
 #define	rCCK0_AFESetting		0xa04	/* Disable init gain now */
@@ -155,20 +158,23 @@
 #define	rCCK0_RxAGC1			0xa0c
 /* AGC default value, saturation level
  * Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now.
- * Not the same as 90 series */
+ * Not the same as 90 series
+ */
 #define	rCCK0_RxAGC2			0xa10	/* AGC & DAGC */
 
 #define	rCCK0_RxHP			0xa14
 
 #define	rCCK0_DSPParameter1		0xa18	/* Timing recovery & Channel
-						 * estimation threshold */
+						 * estimation threshold
+						 */
 #define	rCCK0_DSPParameter2		0xa1c	/* SQ threshold */
 
 #define	rCCK0_TxFilter1			0xa20
 #define	rCCK0_TxFilter2			0xa24
 #define	rCCK0_DebugPort			0xa28	/* debug port and Tx filter3 */
 #define	rCCK0_FalseAlarmReport		0xa2c	/* 0xa2d useless now 0xa30-a4f
-						 * channel report */
+						 * channel report
+						 */
 #define	rCCK0_TRSSIReport		0xa50
 #define	rCCK0_RxReport			0xa54   /* 0xa57 */
 #define	rCCK0_FACounterLower		0xa5c   /* 0xa5b */
@@ -193,11 +199,13 @@
 #define	rOFDM0_XDRxIQImbalance		0xc2c
 
 #define	rOFDM0_RxDetector1		0xc30  /* PD,BW & SBD DM tune
-						* init gain */
+						* init gain
+						*/
 #define	rOFDM0_RxDetector2		0xc34  /* SBD & Fame Sync. */
 #define	rOFDM0_RxDetector3		0xc38  /* Frame Sync. */
 #define	rOFDM0_RxDetector4		0xc3c  /* PD, SBD, Frame Sync &
-						* Short-GI */
+						* Short-GI
+						*/
 
 #define	rOFDM0_RxDSP			0xc40  /* Rx Sync Path */
 #define	rOFDM0_CFOandDAGC		0xc44  /* CFO & DAGC */
@@ -283,7 +291,8 @@
 #define	rTxAGC_Mcs15_Mcs12		0xe1c
 
 /* Analog- control in RX_WAIT_CCA : REG: EE0
- * [Analog- Power & Control Register] */
+ * [Analog- Power & Control Register]
+ */
 #define		rRx_Wait_CCCA		0xe70
 #define	rAnapar_Ctrl_BB			0xee0
 
@@ -371,7 +380,8 @@
 /*
  * Bit Mask
  *
- * 1. Page1(0x100) */
+ * 1. Page1(0x100)
+ */
 #define	bBBResetB			0x100	/* Useless now? */
 #define	bGlobalResetB			0x200
 #define	bOFDMTxStart			0x4
@@ -918,7 +928,8 @@
 #define	bPesudoNoiseState_D      0xffff0000
 
 /* 7. RF Register
- * Zebra1 */
+ * Zebra1
+ */
 #define	bZebra1_HSSIEnable        0x8		/* Useless */
 #define	bZebra1_TRxControl        0xc00
 #define	bZebra1_TRxGainSetting    0x07f