staging: octeon-usb: use a single .h file

Merge USBC and USBN register definitions into a single header
file. Although all HW definitions are purely internal to the driver,
it's better to keep them separate due to the large size of the file.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 312 insertions, 365 deletions

diff --git a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h b/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
deleted file mode 100644
index 6a1c777..0000000
--- a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
+++ /dev/null
@@ -1,343 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export
- * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
- * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * cvmx-usbnx-defs.h
- *
- * Configuration and status register (CSR) type definitions for
- * Octeon usbnx.
- *
- */
-#ifndef __CVMX_USBNX_TYPEDEFS_H__
-#define __CVMX_USBNX_TYPEDEFS_H__
-
-#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
-#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
-
-#define CVMX_USBNXREG1(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
-#define CVMX_USBNXREG2(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
-
-#define CVMX_USBNX_CLK_CTL(bid)		CVMX_USBNXREG1(0x10, bid)
-#define CVMX_USBNX_DMA0_INB_CHN0(bid)	CVMX_USBNXREG2(0x818, bid)
-#define CVMX_USBNX_DMA0_OUTB_CHN0(bid)	CVMX_USBNXREG2(0x858, bid)
-#define CVMX_USBNX_USBP_CTL_STATUS(bid)	CVMX_USBNXREG1(0x18, bid)
-
-/**
- * cvmx_usbn#_clk_ctl
- *
- * USBN_CLK_CTL = USBN's Clock Control
- *
- * This register is used to control the frequency of the hclk and the
- * hreset and phy_rst signals.
- */
-union cvmx_usbnx_clk_ctl {
-	uint64_t u64;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_s
-	 * @divide2: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk.
-	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
-	 *	be zero because it is not implemented, so the maximum
-	 *	ratio of eclk/hclk is currently 16.
-	 *	The actual divide number for hclk is:
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_x_on: Force USB-PHY on during suspend.
-	 *	'1' USB-PHY XO block is powered-down during
-	 *	suspend.
-	 *	'0' USB-PHY XO block is powered-up during
-	 *	suspend.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_rtype: PHY reference clock type
-	 *	On CN50XX/CN52XX/CN56XX the values are:
-	 *		'0' The USB-PHY uses a 12MHz crystal as a clock source
-	 *		    at the USB_XO and USB_XI pins.
-	 *		'1' Reserved.
-	 *		'2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the
-	 *		    USB_XO pin. USB_XI should be tied to ground in this
-	 *		    case.
-	 *		'3' Reserved.
-	 *	On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are:
-	 *		'0' Reserved.
-	 *		'1' Reserved.
-	 *		'2' The PHY PLL uses the XO block output as a reference.
-	 *		    The XO block uses an external clock supplied on the
-	 *		    XO pin. USB_XI should be tied to ground for this
-	 *		    usage.
-	 *		'3' The XO block uses the clock from a crystal.
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz (reserved when a crystal is used)
-	 *	'01': 24 MHz (reserved when a crystal is used)
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 *	NOTE: if a crystal is used as a reference clock,
-	 *	this field must be set to 12 MHz.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated. SEE DIVIDE
-	 *	field of this register.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The frequency of 'hclk' used by the USB subsystem
-	 *	is the eclk frequency divided by the value of
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
-	 *	DIVIDE2 of this register.
-	 *	The hclk frequency should be less than 125Mhz.
-	 *	After writing a value to this field the SW should
-	 *	read the field for the value written.
-	 *	The ENABLE field of this register should not be set
-	 *	until AFTER this field is set and then read.
-	 */
-	struct cvmx_usbnx_clk_ctl_s {
-		uint64_t reserved_20_63	: 44;
-		uint64_t divide2	: 2;
-		uint64_t hclk_rst	: 1;
-		uint64_t p_x_on		: 1;
-		uint64_t p_rtype	: 2;
-		uint64_t p_com_on	: 1;
-		uint64_t p_c_sel	: 2;
-		uint64_t cdiv_byp	: 1;
-		uint64_t sd_mode	: 2;
-		uint64_t s_bist		: 1;
-		uint64_t por		: 1;
-		uint64_t enable		: 1;
-		uint64_t prst		: 1;
-		uint64_t hrst		: 1;
-		uint64_t divide		: 3;
-	} s;
-};
-
-/**
- * cvmx_usbn#_usbp_ctl_status
- *
- * USBN_USBP_CTL_STATUS = USBP Control And Status Register
- *
- * Contains general control and status information for the USBN block.
- */
-union cvmx_usbnx_usbp_ctl_status {
-	uint64_t u64;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_s
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
-	 *	Normally should be set to zero.
-	 *	When customers have no intent to use USB PHY
-	 *	interface, they should:
-	 *	- still provide 3.3V to USB_VDD33, and
-	 *	- tie USB_REXT to 3.3V supply, and
-	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tuning: Transmitter Tuning for High-Speed Operation.
-	 *	Tunes the current supply and rise/fall output
-	 *	times for high-speed operation.
-	 *	[20:19] == 11: Current supply increased
-	 *	approximately 9%
-	 *	[20:19] == 10: Current supply increased
-	 *	approximately 4.5%
-	 *	[20:19] == 01: Design default.
-	 *	[20:19] == 00: Current supply decreased
-	 *	approximately 4.5%
-	 *	[22:21] == 11: Rise and fall times are increased.
-	 *	[22:21] == 10: Design default.
-	 *	[22:21] == 01: Rise and fall times are decreased.
-	 *	[22:21] == 00: Rise and fall times are decreased
-	 *	further as compared to the 01 setting.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_s {
-		uint64_t txrisetune		: 1;
-		uint64_t txvreftune		: 4;
-		uint64_t txfslstune		: 4;
-		uint64_t txhsxvtune		: 2;
-		uint64_t sqrxtune		: 3;
-		uint64_t compdistune		: 3;
-		uint64_t otgtune		: 3;
-		uint64_t otgdisable		: 1;
-		uint64_t portreset		: 1;
-		uint64_t drvvbus		: 1;
-		uint64_t lsbist			: 1;
-		uint64_t fsbist			: 1;
-		uint64_t hsbist			: 1;
-		uint64_t bist_done		: 1;
-		uint64_t bist_err		: 1;
-		uint64_t tdata_out		: 4;
-		uint64_t siddq			: 1;
-		uint64_t txpreemphasistune	: 1;
-		uint64_t dma_bmode		: 1;
-		uint64_t usbc_end		: 1;
-		uint64_t usbp_bist		: 1;
-		uint64_t tclk			: 1;
-		uint64_t dp_pulld		: 1;
-		uint64_t dm_pulld		: 1;
-		uint64_t hst_mode		: 1;
-		uint64_t tuning			: 4;
-		uint64_t tx_bs_enh		: 1;
-		uint64_t tx_bs_en		: 1;
-		uint64_t loop_enb		: 1;
-		uint64_t vtest_enb		: 1;
-		uint64_t bist_enb		: 1;
-		uint64_t tdata_sel		: 1;
-		uint64_t taddr_in		: 4;
-		uint64_t tdata_in		: 8;
-		uint64_t ate_reset		: 1;
-	} s;
-};
-
-#endif
diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
index 2226c7d..da96461 100644
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -66,8 +66,7 @@
 #include <asm/octeon/cvmx-sysinfo.h>
 #include <asm/octeon/cvmx-helper-board.h>
 
-#include "cvmx-usbcx-defs.h"
-#include "cvmx-usbnx-defs.h"
+#include "octeon-hcd.h"
 
 /**
  * enum cvmx_usb_speed - the possible USB device speeds
diff --git a/drivers/staging/octeon-usb/cvmx-usbcx-defs.h b/drivers/staging/octeon-usb/octeon-hcd.h
index d349d77..42fe4fe 100644
--- a/drivers/staging/octeon-usb/cvmx-usbcx-defs.h
+++ b/drivers/staging/octeon-usb/octeon-hcd.h
@@ -1,7 +1,14 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
+/*
+ * Octeon HCD hardware register definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
  *
+ * Some parts of the code were originally released under BSD license:
+ *
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
@@ -14,17 +21,17 @@
  *     copyright notice, this list of conditions and the following
  *     disclaimer in the documentation and/or other materials provided
  *     with the distribution.
-
+ *
  *   * Neither the name of Cavium Networks nor the names of
  *     its contributors may be used to endorse or promote products
  *     derived from this software without specific prior written
  *     permission.
-
+ *
  * This Software, including technical data, may be subject to U.S. export
  * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import  regulations in other
+ * regulations, and may be subject to export or import regulations in other
  * countries.
-
+ *
  * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
  * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
  * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
@@ -33,20 +40,12 @@
  * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
  * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
  * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
  * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * cvmx-usbcx-defs.h
- *
- * Configuration and status register (CSR) type definitions for
- * Octeon usbcx.
- *
  */
-#ifndef __CVMX_USBCX_TYPEDEFS_H__
-#define __CVMX_USBCX_TYPEDEFS_H__
+
+#ifndef __OCTEON_HCD_H__
+#define __OCTEON_HCD_H__
 
 #define CVMX_USBCXBASE 0x00016F0010000000ull
 #define CVMX_USBCXREG1(reg, bid) \
@@ -81,6 +80,19 @@
 #define CVMX_USBCX_HPTXFSIZ(bid)	CVMX_USBCXREG1(0x100, bid)
 #define CVMX_USBCX_HPTXSTS(bid)		CVMX_USBCXREG1(0x410, bid)
 
+#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
+#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
+
+#define CVMX_USBNXREG1(reg, bid) \
+	(CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
+#define CVMX_USBNXREG2(reg, bid) \
+	(CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
+
+#define CVMX_USBNX_CLK_CTL(bid)		CVMX_USBNXREG1(0x10, bid)
+#define CVMX_USBNX_DMA0_INB_CHN0(bid)	CVMX_USBNXREG2(0x818, bid)
+#define CVMX_USBNX_DMA0_OUTB_CHN0(bid)	CVMX_USBNXREG2(0x858, bid)
+#define CVMX_USBNX_USBP_CTL_STATUS(bid)	CVMX_USBNXREG1(0x18, bid)
+
 /**
  * cvmx_usbc#_gahbcfg
  *
@@ -1525,4 +1537,283 @@ union cvmx_usbcx_hptxsts {
 	} s;
 };
 
-#endif
+/**
+ * cvmx_usbn#_clk_ctl
+ *
+ * USBN_CLK_CTL = USBN's Clock Control
+ *
+ * This register is used to control the frequency of the hclk and the
+ * hreset and phy_rst signals.
+ */
+union cvmx_usbnx_clk_ctl {
+	uint64_t u64;
+	/**
+	 * struct cvmx_usbnx_clk_ctl_s
+	 * @divide2: The 'hclk' used by the USB subsystem is derived
+	 *	from the eclk.
+	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
+	 *	be zero because it is not implemented, so the maximum
+	 *	ratio of eclk/hclk is currently 16.
+	 *	The actual divide number for hclk is:
+	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
+	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
+	 *	generate the hclk in the USB Subsystem is held
+	 *	in reset. This bit must be set to '0' before
+	 *	changing the value os DIVIDE in this register.
+	 *	The reset to the HCLK_DIVIDERis also asserted
+	 *	when core reset is asserted.
+	 * @p_x_on: Force USB-PHY on during suspend.
+	 *	'1' USB-PHY XO block is powered-down during
+	 *	suspend.
+	 *	'0' USB-PHY XO block is powered-up during
+	 *	suspend.
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 * @p_rtype: PHY reference clock type
+	 *	On CN50XX/CN52XX/CN56XX the values are:
+	 *		'0' The USB-PHY uses a 12MHz crystal as a clock source
+	 *		    at the USB_XO and USB_XI pins.
+	 *		'1' Reserved.
+	 *		'2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the
+	 *		    USB_XO pin. USB_XI should be tied to ground in this
+	 *		    case.
+	 *		'3' Reserved.
+	 *	On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are:
+	 *		'0' Reserved.
+	 *		'1' Reserved.
+	 *		'2' The PHY PLL uses the XO block output as a reference.
+	 *		    The XO block uses an external clock supplied on the
+	 *		    XO pin. USB_XI should be tied to ground for this
+	 *		    usage.
+	 *		'3' The XO block uses the clock from a crystal.
+	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
+	 *	remain powered in Suspend Mode.
+	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
+	 *	powered down in suspend mode.
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 * @p_c_sel: Phy clock speed select.
+	 *	Selects the reference clock / crystal frequency.
+	 *	'11': Reserved
+	 *	'10': 48 MHz (reserved when a crystal is used)
+	 *	'01': 24 MHz (reserved when a crystal is used)
+	 *	'00': 12 MHz
+	 *	The value of this field must be set while POR is
+	 *	active.
+	 *	NOTE: if a crystal is used as a reference clock,
+	 *	this field must be set to 12 MHz.
+	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
+	 * @sd_mode: Scaledown mode for the USBC. Control timing events
+	 *	in the USBC, for normal operation this must be '0'.
+	 * @s_bist: Starts bist on the hclk memories, during the '0'
+	 *	to '1' transition.
+	 * @por: Power On Reset for the PHY.
+	 *	Resets all the PHYS registers and state machines.
+	 * @enable: When '1' allows the generation of the hclk. When
+	 *	'0' the hclk will not be generated. SEE DIVIDE
+	 *	field of this register.
+	 * @prst: When this field is '0' the reset associated with
+	 *	the phy_clk functionality in the USB Subsystem is
+	 *	help in reset. This bit should not be set to '1'
+	 *	until the time it takes 6 clocks (hclk or phy_clk,
+	 *	whichever is slower) has passed. Under normal
+	 *	operation once this bit is set to '1' it should not
+	 *	be set to '0'.
+	 * @hrst: When this field is '0' the reset associated with
+	 *	the hclk functioanlity in the USB Subsystem is
+	 *	held in reset.This bit should not be set to '1'
+	 *	until 12ms after phy_clk is stable. Under normal
+	 *	operation, once this bit is set to '1' it should
+	 *	not be set to '0'.
+	 * @divide: The frequency of 'hclk' used by the USB subsystem
+	 *	is the eclk frequency divided by the value of
+	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+	 *	DIVIDE2 of this register.
+	 *	The hclk frequency should be less than 125Mhz.
+	 *	After writing a value to this field the SW should
+	 *	read the field for the value written.
+	 *	The ENABLE field of this register should not be set
+	 *	until AFTER this field is set and then read.
+	 */
+	struct cvmx_usbnx_clk_ctl_s {
+		uint64_t reserved_20_63	: 44;
+		uint64_t divide2	: 2;
+		uint64_t hclk_rst	: 1;
+		uint64_t p_x_on		: 1;
+		uint64_t p_rtype	: 2;
+		uint64_t p_com_on	: 1;
+		uint64_t p_c_sel	: 2;
+		uint64_t cdiv_byp	: 1;
+		uint64_t sd_mode	: 2;
+		uint64_t s_bist		: 1;
+		uint64_t por		: 1;
+		uint64_t enable		: 1;
+		uint64_t prst		: 1;
+		uint64_t hrst		: 1;
+		uint64_t divide		: 3;
+	} s;
+};
+
+/**
+ * cvmx_usbn#_usbp_ctl_status
+ *
+ * USBN_USBP_CTL_STATUS = USBP Control And Status Register
+ *
+ * Contains general control and status information for the USBN block.
+ */
+union cvmx_usbnx_usbp_ctl_status {
+	uint64_t u64;
+	/**
+	 * struct cvmx_usbnx_usbp_ctl_status_s
+	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
+	 * @txvreftune: HS DC Voltage Level Adjustment
+	 * @txfslstune: FS/LS Source Impedence Adjustment
+	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
+	 * @sqrxtune: Squelch Threshold Adjustment
+	 * @compdistune: Disconnect Threshold Adjustment
+	 * @otgtune: VBUS Valid Threshold Adjustment
+	 * @otgdisable: OTG Block Disable
+	 * @portreset: Per_Port Reset
+	 * @drvvbus: Drive VBUS
+	 * @lsbist: Low-Speed BIST Enable.
+	 * @fsbist: Full-Speed BIST Enable.
+	 * @hsbist: High-Speed BIST Enable.
+	 * @bist_done: PHY Bist Done.
+	 *	Asserted at the end of the PHY BIST sequence.
+	 * @bist_err: PHY Bist Error.
+	 *	Indicates an internal error was detected during
+	 *	the BIST sequence.
+	 * @tdata_out: PHY Test Data Out.
+	 *	Presents either internaly generated signals or
+	 *	test register contents, based upon the value of
+	 *	test_data_out_sel.
+	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
+	 *	Normally should be set to zero.
+	 *	When customers have no intent to use USB PHY
+	 *	interface, they should:
+	 *	- still provide 3.3V to USB_VDD33, and
+	 *	- tie USB_REXT to 3.3V supply, and
+	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
+	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
+	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
+	 *	with byte-counts between packets. When set to 0
+	 *	the L2C DMA address is incremented to the next
+	 *	4-byte aligned address after adding byte-count.
+	 * @usbc_end: Bigendian input to the USB Core. This should be
+	 *	set to '0' for operation.
+	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+	 *	This signal enables the pull-down resistance on
+	 *	the D+ line. '1' pull down-resistance is connected
+	 *	to D+/ '0' pull down resistance is not connected
+	 *	to D+. When an A/B device is acting as a host
+	 *	(downstream-facing port), dp_pulldown and
+	 *	dm_pulldown are enabled. This must not toggle
+	 *	during normal opeartion.
+	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+	 *	This signal enables the pull-down resistance on
+	 *	the D- line. '1' pull down-resistance is connected
+	 *	to D-. '0' pull down resistance is not connected
+	 *	to D-. When an A/B device is acting as a host
+	 *	(downstream-facing port), dp_pulldown and
+	 *	dm_pulldown are enabled. This must not toggle
+	 *	during normal opeartion.
+	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
+	 *	USB is acting as device. This field needs to be
+	 *	set while the USB is in reset.
+	 * @tuning: Transmitter Tuning for High-Speed Operation.
+	 *	Tunes the current supply and rise/fall output
+	 *	times for high-speed operation.
+	 *	[20:19] == 11: Current supply increased
+	 *	approximately 9%
+	 *	[20:19] == 10: Current supply increased
+	 *	approximately 4.5%
+	 *	[20:19] == 01: Design default.
+	 *	[20:19] == 00: Current supply decreased
+	 *	approximately 4.5%
+	 *	[22:21] == 11: Rise and fall times are increased.
+	 *	[22:21] == 10: Design default.
+	 *	[22:21] == 01: Rise and fall times are decreased.
+	 *	[22:21] == 00: Rise and fall times are decreased
+	 *	further as compared to the 01 setting.
+	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+	 *	Enables or disables bit stuffing on data[15:8]
+	 *	when bit-stuffing is enabled.
+	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+	 *	Enables or disables bit stuffing on data[7:0]
+	 *	when bit-stuffing is enabled.
+	 * @loop_enb: PHY Loopback Test Enable.
+	 *	'1': During data transmission the receive is
+	 *	enabled.
+	 *	'0': During data transmission the receive is
+	 *	disabled.
+	 *	Must be '0' for normal operation.
+	 * @vtest_enb: Analog Test Pin Enable.
+	 *	'1' The PHY's analog_test pin is enabled for the
+	 *	input and output of applicable analog test signals.
+	 *	'0' THe analog_test pin is disabled.
+	 * @bist_enb: Built-In Self Test Enable.
+	 *	Used to activate BIST in the PHY.
+	 * @tdata_sel: Test Data Out Select.
+	 *	'1' test_data_out[3:0] (PHY) register contents
+	 *	are output. '0' internaly generated signals are
+	 *	output.
+	 * @taddr_in: Mode Address for Test Interface.
+	 *	Specifies the register address for writing to or
+	 *	reading from the PHY test interface register.
+	 * @tdata_in: Internal Testing Register Input Data and Select
+	 *	This is a test bus. Data is present on [3:0],
+	 *	and its corresponding select (enable) is present
+	 *	on bits [7:4].
+	 * @ate_reset: Reset input from automatic test equipment.
+	 *	This is a test signal. When the USB Core is
+	 *	powered up (not in Susned Mode), an automatic
+	 *	tester can use this to disable phy_clock and
+	 *	free_clk, then re-eanable them with an aligned
+	 *	phase.
+	 *	'1': The phy_clk and free_clk outputs are
+	 *	disabled. "0": The phy_clock and free_clk outputs
+	 *	are available within a specific period after the
+	 *	de-assertion.
+	 */
+	struct cvmx_usbnx_usbp_ctl_status_s {
+		uint64_t txrisetune		: 1;
+		uint64_t txvreftune		: 4;
+		uint64_t txfslstune		: 4;
+		uint64_t txhsxvtune		: 2;
+		uint64_t sqrxtune		: 3;
+		uint64_t compdistune		: 3;
+		uint64_t otgtune		: 3;
+		uint64_t otgdisable		: 1;
+		uint64_t portreset		: 1;
+		uint64_t drvvbus		: 1;
+		uint64_t lsbist			: 1;
+		uint64_t fsbist			: 1;
+		uint64_t hsbist			: 1;
+		uint64_t bist_done		: 1;
+		uint64_t bist_err		: 1;
+		uint64_t tdata_out		: 4;
+		uint64_t siddq			: 1;
+		uint64_t txpreemphasistune	: 1;
+		uint64_t dma_bmode		: 1;
+		uint64_t usbc_end		: 1;
+		uint64_t usbp_bist		: 1;
+		uint64_t tclk			: 1;
+		uint64_t dp_pulld		: 1;
+		uint64_t dm_pulld		: 1;
+		uint64_t hst_mode		: 1;
+		uint64_t tuning			: 4;
+		uint64_t tx_bs_enh		: 1;
+		uint64_t tx_bs_en		: 1;
+		uint64_t loop_enb		: 1;
+		uint64_t vtest_enb		: 1;
+		uint64_t bist_enb		: 1;
+		uint64_t tdata_sel		: 1;
+		uint64_t taddr_in		: 4;
+		uint64_t tdata_in		: 8;
+		uint64_t ate_reset		: 1;
+	} s;
+};
+
+#endif /* __OCTEON_HCD_H__ */