diff options
author | Samuel Iglesias Gonsalvez <siglesias@igalia.com> | 2012-05-09 15:27:21 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-05-09 14:16:51 -0700 |
commit | ba4dc61fe8c545a5d6a68b63616776556b771f51 (patch) | |
tree | e62bf24a15d36c8be6d0f25ba332b61eec069f3c /drivers/staging/ipack | |
parent | 0eeca14f5a4c03e5475177aa39a8c4e43b7ebda8 (diff) | |
download | op-kernel-dev-ba4dc61fe8c545a5d6a68b63616776556b771f51.zip op-kernel-dev-ba4dc61fe8c545a5d6a68b63616776556b771f51.tar.gz |
Staging: ipack: add support for IP-OCTAL mezzanine board
IP-OCTAL is a 8-channels serial port device. There are several models one per
each standard: RS-232, RS-422, RS-485.
This driver can manage all of them.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/ipack')
-rw-r--r-- | drivers/staging/ipack/Kconfig | 2 | ||||
-rw-r--r-- | drivers/staging/ipack/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/ipack/TODO | 9 | ||||
-rw-r--r-- | drivers/staging/ipack/devices/Kconfig | 7 | ||||
-rw-r--r-- | drivers/staging/ipack/devices/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/ipack/devices/ipoctal.c | 893 | ||||
-rw-r--r-- | drivers/staging/ipack/devices/ipoctal.h | 81 | ||||
-rw-r--r-- | drivers/staging/ipack/devices/scc2698.h | 229 |
8 files changed, 1223 insertions, 0 deletions
diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig index 30b28fe..619c149 100644 --- a/drivers/staging/ipack/Kconfig +++ b/drivers/staging/ipack/Kconfig @@ -9,6 +9,8 @@ menuconfig IPACK_BUS if IPACK_BUS +source "drivers/staging/ipack/devices/Kconfig" + source "drivers/staging/ipack/bridges/Kconfig" endif # IPACK diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile index 59b8762..85ff223 100644 --- a/drivers/staging/ipack/Makefile +++ b/drivers/staging/ipack/Makefile @@ -2,4 +2,5 @@ # Makefile for the IPACK bridge device drivers. # obj-$(CONFIG_IPACK_BUS) += ipack.o +obj-y += devices/ obj-y += bridges/ diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO index d5a5735..11828ed 100644 --- a/drivers/staging/ipack/TODO +++ b/drivers/staging/ipack/TODO @@ -22,6 +22,15 @@ TPCI-200 * It has a linked list with the tpci200 devices it is managing. Get rid of it and use driver_for_each_device() instead. +IP-OCTAL +-------- + +* It has a linked list which saves the devices it is currently + managing. It should use the driver_for_each_device() function. It is not there + due to the impossibility of using container_of macro to recover the + corresponding "struct ipoctal" because the attribute "struct ipack_device" is + a pointer. This code should be refactored. + Ipack ----- diff --git a/drivers/staging/ipack/devices/Kconfig b/drivers/staging/ipack/devices/Kconfig new file mode 100644 index 0000000..39f7188 --- /dev/null +++ b/drivers/staging/ipack/devices/Kconfig @@ -0,0 +1,7 @@ +config SERIAL_IPOCTAL + tristate "IndustryPack IP-OCTAL uart support" + depends on IPACK_BUS + help + This driver supports the IPOCTAL serial port device for the IndustryPack bus. + default n + diff --git a/drivers/staging/ipack/devices/Makefile b/drivers/staging/ipack/devices/Makefile new file mode 100644 index 0000000..6de18bd --- /dev/null +++ b/drivers/staging/ipack/devices/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_SERIAL_IPOCTAL) += ipoctal.o diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c new file mode 100644 index 0000000..15c0c6b --- /dev/null +++ b/drivers/staging/ipack/devices/ipoctal.c @@ -0,0 +1,893 @@ +/** + * ipoctal.c + * + * driver for the GE IP-OCTAL boards + * Copyright (c) 2009 Nicolas Serafini, EIC2 SA + * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN + * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/tty_flip.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/atomic.h> +#include "../ipack.h" +#include "ipoctal.h" +#include "scc2698.h" + +#define IP_OCTAL_MANUFACTURER_ID 0xF0 +#define IP_OCTAL_232_ID 0x22 +#define IP_OCTAL_422_ID 0x2A +#define IP_OCTAL_485_ID 0x48 + +#define IP_OCTAL_ID_SPACE_VECTOR 0x41 +#define IP_OCTAL_NB_BLOCKS 4 + +static struct ipack_driver driver; +static const struct tty_operations ipoctal_fops; + +struct ipoctal { + struct list_head list; + struct ipack_device *dev; + unsigned int board_id; + struct scc2698_channel *chan_regs; + struct scc2698_block *block_regs; + struct ipoctal_stats chan_stats[NR_CHANNELS]; + char *buffer[NR_CHANNELS]; + unsigned int nb_bytes[NR_CHANNELS]; + unsigned int count_wr[NR_CHANNELS]; + struct ipoctal_config chan_config[NR_CHANNELS]; + wait_queue_head_t queue[NR_CHANNELS]; + unsigned short error_flag[NR_CHANNELS]; + spinlock_t lock[NR_CHANNELS]; + unsigned int pointer_read[NR_CHANNELS]; + unsigned int pointer_write[NR_CHANNELS]; + atomic_t open[NR_CHANNELS]; + unsigned char write; + struct tty_port tty_port[NR_CHANNELS]; + struct tty_driver *tty_drv; +}; + +/* Linked list to save the registered devices */ +static LIST_HEAD(ipoctal_list); + +static inline void ipoctal_write_io_reg(struct ipoctal *ipoctal, + unsigned char *dest, + unsigned char value) +{ + unsigned long offset; + + offset = ((void *) dest) - ipoctal->dev->io_space.address; + ipoctal->dev->ops->write8(ipoctal->dev, IPACK_IO_SPACE, offset, value); +} + +static inline void ipoctal_write_cr_cmd(struct ipoctal *ipoctal, + unsigned char *dest, + unsigned char value) +{ + ipoctal_write_io_reg(ipoctal, dest, value); +} + +static inline unsigned char ipoctal_read_io_reg(struct ipoctal *ipoctal, + unsigned char *src) +{ + unsigned long offset; + unsigned char value; + + offset = ((void *) src) - ipoctal->dev->io_space.address; + ipoctal->dev->ops->read8(ipoctal->dev, IPACK_IO_SPACE, offset, &value); + return value; +} + +static struct ipoctal *ipoctal_find_board(struct tty_struct *tty) +{ + struct ipoctal *p; + + list_for_each_entry(p, &ipoctal_list, list) { + if (tty->driver->major == p->tty_drv->major) + return p; + } + + return NULL; +} + +static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct ipoctal *ipoctal; + int channel = tty->index; + + ipoctal = ipoctal_find_board(tty); + + if (ipoctal == NULL) { + pr_err("Device not found. Major %d\n", tty->driver->major); + return -ENODEV; + } + + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_ENABLE_RX); + tty->driver_data = ipoctal; + + return 0; +} + +static int ipoctal_open(struct tty_struct *tty, struct file *file) +{ + int channel = tty->index; + int res; + struct ipoctal *ipoctal; + + ipoctal = ipoctal_find_board(tty); + + if (ipoctal == NULL) { + pr_err("Device not found. Major %d\n", tty->driver->major); + return -ENODEV; + } + + if (atomic_read(&ipoctal->open[channel])) + return -EBUSY; + + res = tty_port_open(&ipoctal->tty_port[channel], tty, file); + if (res) + return res; + + atomic_inc(&ipoctal->open[channel]); + return 0; +} + +static void ipoctal_reset_stats(struct ipoctal_stats *stats) +{ + stats->tx = 0; + stats->rx = 0; + stats->rcv_break = 0; + stats->framing_err = 0; + stats->overrun_err = 0; + stats->parity_err = 0; +} + +static void ipoctal_free_channel(struct tty_struct *tty) +{ + int channel = tty->index; + struct ipoctal *ipoctal = tty->driver_data; + + if (ipoctal == NULL) + return; + + ipoctal_reset_stats(&ipoctal->chan_stats[channel]); + ipoctal->pointer_read[channel] = 0; + ipoctal->pointer_write[channel] = 0; + ipoctal->nb_bytes[channel] = 0; +} + +static void ipoctal_close(struct tty_struct *tty, struct file *filp) +{ + int channel = tty->index; + struct ipoctal *ipoctal = tty->driver_data; + + tty_port_close(&ipoctal->tty_port[channel], tty, filp); + + if (atomic_dec_and_test(&ipoctal->open[channel])) + ipoctal_free_channel(tty); +} + +static int ipoctal_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct ipoctal *ipoctal = tty->driver_data; + int channel = tty->index; + + icount->cts = 0; + icount->dsr = 0; + icount->rng = 0; + icount->dcd = 0; + icount->rx = ipoctal->chan_stats[channel].rx; + icount->tx = ipoctal->chan_stats[channel].tx; + icount->frame = ipoctal->chan_stats[channel].framing_err; + icount->parity = ipoctal->chan_stats[channel].parity_err; + icount->brk = ipoctal->chan_stats[channel].rcv_break; + return 0; +} + +static int ipoctal_irq_handler(void *arg) +{ + unsigned int channel; + unsigned int block; + unsigned char isr; + unsigned char sr; + unsigned char isr_tx_rdy, isr_rx_rdy; + unsigned char value; + unsigned char flag; + struct tty_struct *tty; + struct ipoctal *ipoctal = (struct ipoctal *) arg; + + /* Check all channels */ + for (channel = 0; channel < NR_CHANNELS; channel++) { + /* If there is no client, skip the check */ + if (!atomic_read(&ipoctal->open[channel])) + continue; + + tty = tty_port_tty_get(&ipoctal->tty_port[channel]); + if (!tty) + continue; + + /* + * The HW is organized in pair of channels. + * See which register we need to read from + */ + block = channel / 2; + isr = ipoctal_read_io_reg(ipoctal, + &ipoctal->block_regs[block].u.r.isr); + sr = ipoctal_read_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.r.sr); + + if ((channel % 2) == 1) { + isr_tx_rdy = isr & ISR_TxRDY_B; + isr_rx_rdy = isr & ISR_RxRDY_FFULL_B; + } else { + isr_tx_rdy = isr & ISR_TxRDY_A; + isr_rx_rdy = isr & ISR_RxRDY_FFULL_A; + } + + /* In case of RS-485, change from TX to RX when finishing TX. + * Half-duplex. + */ + if ((ipoctal->board_id == IP_OCTAL_485_ID) && + (sr & SR_TX_EMPTY) && + (ipoctal->nb_bytes[channel] == 0)) { + ipoctal_write_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_DISABLE_TX); + ipoctal_write_cr_cmd(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_NEGATE_RTSN); + ipoctal_write_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_ENABLE_RX); + ipoctal->write = 1; + wake_up_interruptible(&ipoctal->queue[channel]); + } + + /* RX data */ + if (isr_rx_rdy && (sr & SR_RX_READY)) { + value = ipoctal_read_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.r.rhr); + flag = TTY_NORMAL; + + /* Error: count statistics */ + if (sr & SR_ERROR) { + ipoctal_write_cr_cmd(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_ERR_STATUS); + + if (sr & SR_OVERRUN_ERROR) { + ipoctal->error_flag[channel] |= UART_OVERRUN; + ipoctal->chan_stats[channel].overrun_err++; + /* Overrun doesn't affect the current character*/ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + if (sr & SR_PARITY_ERROR) { + ipoctal->error_flag[channel] |= UART_PARITY; + ipoctal->chan_stats[channel].parity_err++; + flag = TTY_PARITY; + } + if (sr & SR_FRAMING_ERROR) { + ipoctal->error_flag[channel] |= UART_FRAMING; + ipoctal->chan_stats[channel].framing_err++; + flag = TTY_FRAME; + } + if (sr & SR_RECEIVED_BREAK) { + ipoctal->error_flag[channel] |= UART_BREAK; + ipoctal->chan_stats[channel].rcv_break++; + flag = TTY_BREAK; + } + } + + tty_insert_flip_char(tty, value, flag); + } + + /* TX of each character */ + if (isr_tx_rdy && (sr & SR_TX_READY)) { + unsigned int *pointer_write = + &ipoctal->pointer_write[channel]; + + if (ipoctal->nb_bytes[channel] <= 0) { + ipoctal->nb_bytes[channel] = 0; + continue; + } + spin_lock(&ipoctal->lock[channel]); + value = ipoctal->buffer[channel][*pointer_write]; + ipoctal_write_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.w.thr, + value); + ipoctal->chan_stats[channel].tx++; + ipoctal->count_wr[channel]++; + (*pointer_write)++; + *pointer_write = *pointer_write % PAGE_SIZE; + ipoctal->nb_bytes[channel]--; + spin_unlock(&ipoctal->lock[channel]); + + if ((ipoctal->nb_bytes[channel] == 0) && + (waitqueue_active(&ipoctal->queue[channel]))) { + + if (ipoctal->board_id != IP_OCTAL_485_ID) { + ipoctal->write = 1; + wake_up_interruptible(&ipoctal->queue[channel]); + } + } + } + + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } + return IRQ_HANDLED; +} + +static int ipoctal_check_model(struct ipack_device *dev, unsigned char *id) +{ + unsigned char manufacturerID; + unsigned char board_id; + + dev->ops->read8(dev, IPACK_ID_SPACE, + IPACK_IDPROM_OFFSET_MANUFACTURER_ID, &manufacturerID); + if (manufacturerID != IP_OCTAL_MANUFACTURER_ID) + return -ENODEV; + + dev->ops->read8(dev, IPACK_ID_SPACE, + IPACK_IDPROM_OFFSET_MODEL, (unsigned char *)&board_id); + + switch (board_id) { + case IP_OCTAL_232_ID: + case IP_OCTAL_422_ID: + case IP_OCTAL_485_ID: + *id = board_id; + break; + default: + return -ENODEV; + } + + return 0; +} + +static const struct tty_port_operations ipoctal_tty_port_ops = { + .dtr_rts = NULL, + .activate = ipoctal_port_activate, +}; + +static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, + unsigned int slot, unsigned int vector) +{ + int res = 0; + int i; + struct tty_driver *tty; + char name[20]; + unsigned char board_id; + + res = ipoctal->dev->ops->map_space(ipoctal->dev, 0, IPACK_ID_SPACE); + if (res) { + pr_err("Unable to map slot [%d:%d] ID space!\n", bus_nr, slot); + return res; + } + + res = ipoctal_check_model(ipoctal->dev, &board_id); + if (res) { + ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE); + goto out_unregister_id_space; + } + ipoctal->board_id = board_id; + + res = ipoctal->dev->ops->map_space(ipoctal->dev, 0, IPACK_IO_SPACE); + if (res) { + pr_err("Unable to map slot [%d:%d] IO space!\n", bus_nr, slot); + goto out_unregister_id_space; + } + + res = ipoctal->dev->ops->map_space(ipoctal->dev, + 0x8000, IPACK_MEM_SPACE); + if (res) { + pr_err("Unable to map slot [%d:%d] MEM space!\n", bus_nr, slot); + goto out_unregister_io_space; + } + + /* Save the virtual address to access the registers easily */ + ipoctal->chan_regs = + (struct scc2698_channel *) ipoctal->dev->io_space.address; + ipoctal->block_regs = + (struct scc2698_block *) ipoctal->dev->io_space.address; + + /* Disable RX and TX before touching anything */ + for (i = 0; i < NR_CHANNELS ; i++) { + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr, + CR_DISABLE_RX | CR_DISABLE_TX); + } + + for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) { + ipoctal_write_io_reg(ipoctal, + &ipoctal->block_regs[i].u.w.acr, + ACR_BRG_SET2); + ipoctal_write_io_reg(ipoctal, + &ipoctal->block_regs[i].u.w.opcr, + OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN | + OPCR_MPOb_RTSN); + ipoctal_write_io_reg(ipoctal, + &ipoctal->block_regs[i].u.w.imr, + IMR_TxRDY_A | IMR_RxRDY_FFULL_A | + IMR_DELTA_BREAK_A | IMR_TxRDY_B | + IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B); + } + + /* + * IP-OCTAL has different addresses to copy its IRQ vector. + * Depending of the carrier these addresses are accesible or not. + * More info in the datasheet. + */ + ipoctal->dev->ops->request_irq(ipoctal->dev, vector, + ipoctal_irq_handler, ipoctal); + ipoctal->dev->ops->write8(ipoctal->dev, IPACK_ID_SPACE, 0, vector); + + /* Register the TTY device */ + + /* Each IP-OCTAL channel is a TTY port */ + tty = alloc_tty_driver(NR_CHANNELS); + + if (!tty) { + res = -ENOMEM; + goto out_unregister_slot_unmap; + } + + /* Fill struct tty_driver with ipoctal data */ + tty->owner = THIS_MODULE; + tty->driver_name = "ipoctal"; + sprintf(name, "ipoctal.%d.%d.", bus_nr, slot); + tty->name = name; + tty->major = 0; + + tty->minor_start = 0; + tty->type = TTY_DRIVER_TYPE_SERIAL; + tty->subtype = SERIAL_TYPE_NORMAL; + tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty->init_termios = tty_std_termios; + tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty->init_termios.c_ispeed = 9600; + tty->init_termios.c_ospeed = 9600; + + tty_set_operations(tty, &ipoctal_fops); + res = tty_register_driver(tty); + if (res) { + pr_err("Can't register tty driver.\n"); + put_tty_driver(tty); + goto out_unregister_slot_unmap; + } + + /* Save struct tty_driver for use it when uninstalling the device */ + ipoctal->tty_drv = tty; + + for (i = 0; i < NR_CHANNELS; i++) { + tty_port_init(&ipoctal->tty_port[i]); + tty_port_alloc_xmit_buf(&ipoctal->tty_port[i]); + ipoctal->tty_port[i].ops = &ipoctal_tty_port_ops; + + ipoctal_reset_stats(&ipoctal->chan_stats[i]); + ipoctal->nb_bytes[i] = 0; + init_waitqueue_head(&ipoctal->queue[i]); + ipoctal->error_flag[i] = UART_NOERROR; + + spin_lock_init(&ipoctal->lock[i]); + ipoctal->pointer_read[i] = 0; + ipoctal->pointer_write[i] = 0; + ipoctal->nb_bytes[i] = 0; + tty_register_device(tty, i, NULL); + + /* + * Enable again the RX. TX will be enabled when + * there is something to send + */ + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr, + CR_ENABLE_RX); + } + + return 0; + +out_unregister_slot_unmap: + ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE); +out_unregister_io_space: + ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_IO_SPACE); +out_unregister_id_space: + ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_MEM_SPACE); + return res; +} + +static inline int ipoctal_copy_write_buffer(struct ipoctal *ipoctal, + unsigned int channel, + const unsigned char *buf, + int count) +{ + unsigned long flags; + int i; + unsigned int *pointer_read = &ipoctal->pointer_read[channel]; + + /* Copy the bytes from the user buffer to the internal one */ + for (i = 0; i < count; i++) { + if (i <= (PAGE_SIZE - ipoctal->nb_bytes[channel])) { + spin_lock_irqsave(&ipoctal->lock[channel], flags); + ipoctal->tty_port[channel].xmit_buf[*pointer_read] = buf[i]; + *pointer_read = (*pointer_read + 1) % PAGE_SIZE; + ipoctal->nb_bytes[channel]++; + spin_unlock_irqrestore(&ipoctal->lock[channel], flags); + } else { + break; + } + } + return i; +} + +static int ipoctal_write(struct ipoctal *ipoctal, unsigned int channel, + const unsigned char *buf, int count) +{ + ipoctal->nb_bytes[channel] = 0; + ipoctal->count_wr[channel] = 0; + + ipoctal_copy_write_buffer(ipoctal, channel, buf, count); + + ipoctal->error_flag[channel] = UART_NOERROR; + + /* As the IP-OCTAL 485 only supports half duplex, do it manually */ + if (ipoctal->board_id == IP_OCTAL_485_ID) { + ipoctal_write_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_DISABLE_RX); + ipoctal_write_cr_cmd(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_ASSERT_RTSN); + } + + /* + * Send a packet and then disable TX to avoid failure after several send + * operations + */ + ipoctal_write_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_ENABLE_TX); + wait_event_interruptible(ipoctal->queue[channel], ipoctal->write); + ipoctal_write_io_reg(ipoctal, + &ipoctal->chan_regs[channel].u.w.cr, + CR_DISABLE_TX); + + ipoctal->write = 0; + return ipoctal->count_wr[channel]; +} + +static int ipoctal_write_tty(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + unsigned int channel = tty->index; + struct ipoctal *ipoctal = tty->driver_data; + + return ipoctal_write(ipoctal, channel, buf, count); +} + +static int ipoctal_write_room(struct tty_struct *tty) +{ + int channel = tty->index; + struct ipoctal *ipoctal = tty->driver_data; + + return PAGE_SIZE - ipoctal->nb_bytes[channel]; +} + +static int ipoctal_chars_in_buffer(struct tty_struct *tty) +{ + int channel = tty->index; + struct ipoctal *ipoctal = tty->driver_data; + + return ipoctal->nb_bytes[channel]; +} + +static void ipoctal_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + unsigned int cflag; + unsigned char mr1 = 0; + unsigned char mr2 = 0; + unsigned char csr = 0; + unsigned int channel = tty->index; + struct ipoctal *ipoctal = tty->driver_data; + speed_t baud; + + cflag = tty->termios->c_cflag; + + /* Disable and reset everything before change the setup */ + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_DISABLE_RX | CR_DISABLE_TX); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_RX); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_TX); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_ERR_STATUS); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_MR); + + /* Set Bits per chars */ + switch (cflag & CSIZE) { + case CS6: + mr1 |= MR1_CHRL_6_BITS; + break; + case CS7: + mr1 |= MR1_CHRL_7_BITS; + break; + case CS8: + default: + mr1 |= MR1_CHRL_8_BITS; + /* By default, select CS8 */ + tty->termios->c_cflag = (cflag & ~CSIZE) | CS8; + break; + } + + /* Set Parity */ + if (cflag & PARENB) + if (cflag & PARODD) + mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD; + else + mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN; + else + mr1 |= MR1_PARITY_OFF; + + /* Mark or space parity is not supported */ + tty->termios->c_cflag &= ~CMSPAR; + + /* Set stop bits */ + if (cflag & CSTOPB) + mr2 |= MR2_STOP_BITS_LENGTH_2; + else + mr2 |= MR2_STOP_BITS_LENGTH_1; + + /* Set the flow control */ + switch (ipoctal->board_id) { + case IP_OCTAL_232_ID: + if (cflag & CRTSCTS) { + mr1 |= MR1_RxRTS_CONTROL_ON; + mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON; + ipoctal->chan_config[channel].flow_control = 1; + } else { + mr1 |= MR1_RxRTS_CONTROL_OFF; + mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF; + ipoctal->chan_config[channel].flow_control = 0; + } + break; + case IP_OCTAL_422_ID: + mr1 |= MR1_RxRTS_CONTROL_OFF; + mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF; + ipoctal->chan_config[channel].flow_control = 0; + break; + case IP_OCTAL_485_ID: + mr1 |= MR1_RxRTS_CONTROL_OFF; + mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF; + ipoctal->chan_config[channel].flow_control = 0; + break; + default: + return; + break; + } + + baud = tty_get_baud_rate(tty); + tty_termios_encode_baud_rate(tty->termios, baud, baud); + + /* Set baud rate */ + switch (tty->termios->c_ospeed) { + case 75: + csr |= TX_CLK_75 | RX_CLK_75; + break; + case 110: + csr |= TX_CLK_110 | RX_CLK_110; + break; + case 150: + csr |= TX_CLK_150 | RX_CLK_150; + break; + case 300: + csr |= TX_CLK_300 | RX_CLK_300; + break; + case 600: + csr |= TX_CLK_600 | RX_CLK_600; + break; + case 1200: + csr |= TX_CLK_1200 | RX_CLK_1200; + break; + case 1800: + csr |= TX_CLK_1800 | RX_CLK_1800; + break; + case 2000: + csr |= TX_CLK_2000 | RX_CLK_2000; + break; + case 2400: + csr |= TX_CLK_2400 | RX_CLK_2400; + break; + case 4800: + csr |= TX_CLK_4800 | RX_CLK_4800; + break; + case 9600: + csr |= TX_CLK_9600 | RX_CLK_9600; + break; + case 19200: + csr |= TX_CLK_19200 | RX_CLK_19200; + break; + case 38400: + default: + csr |= TX_CLK_38400 | RX_CLK_38400; + /* In case of default, we establish 38400 bps */ + tty_termios_encode_baud_rate(tty->termios, 38400, 38400); + break; + } + + mr1 |= MR1_ERROR_CHAR; + mr1 |= MR1_RxINT_RxRDY; + + /* Write the control registers */ + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr1); + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr2); + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.csr, csr); + + /* save the setup in the structure */ + ipoctal->chan_config[channel].baud = tty_get_baud_rate(tty); + ipoctal->chan_config[channel].bits_per_char = cflag & CSIZE; + ipoctal->chan_config[channel].parity = cflag & PARENB; + ipoctal->chan_config[channel].stop_bits = cflag & CSTOPB; + + /* Enable again the RX */ + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_ENABLE_RX); +} + +static void ipoctal_hangup(struct tty_struct *tty) +{ + unsigned long flags; + int channel = tty->index; + struct ipoctal *ipoctal = tty->driver_data; + + if (ipoctal == NULL) + return; + + spin_lock_irqsave(&ipoctal->lock[channel], flags); + ipoctal->nb_bytes[channel] = 0; + ipoctal->pointer_read[channel] = 0; + ipoctal->pointer_write[channel] = 0; + spin_unlock_irqrestore(&ipoctal->lock[channel], flags); + + tty_port_hangup(&ipoctal->tty_port[channel]); + + ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_DISABLE_RX | CR_DISABLE_TX); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_RX); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_TX); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_ERR_STATUS); + ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr, + CR_CMD_RESET_MR); + + clear_bit(ASYNCB_INITIALIZED, &ipoctal->tty_port[channel].flags); + wake_up_interruptible(&ipoctal->tty_port[channel].open_wait); +} + +static const struct tty_operations ipoctal_fops = { + .ioctl = NULL, + .open = ipoctal_open, + .close = ipoctal_close, + .write = ipoctal_write_tty, + .set_termios = ipoctal_set_termios, + .write_room = ipoctal_write_room, + .chars_in_buffer = ipoctal_chars_in_buffer, + .get_icount = ipoctal_get_icount, + .hangup = ipoctal_hangup, +}; + +static int ipoctal_match(struct ipack_device *dev) +{ + int res; + unsigned char board_id; + + res = dev->ops->map_space(dev, 0, IPACK_ID_SPACE); + if (res) + return res; + + res = ipoctal_check_model(dev, &board_id); + dev->ops->unmap_space(dev, IPACK_ID_SPACE); + return res; +} + +static int ipoctal_probe(struct ipack_device *dev) +{ + int res; + struct ipoctal *ipoctal; + + ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL); + if (ipoctal == NULL) + return -ENOMEM; + + ipoctal->dev = dev; + res = ipoctal_inst_slot(ipoctal, dev->bus_nr, dev->slot, dev->irq); + if (res) + goto out_uninst; + + list_add_tail(&ipoctal->list, &ipoctal_list); + return 0; + +out_uninst: + kfree(ipoctal); + return res; +} + +static void __ipoctal_remove(struct ipoctal *ipoctal) +{ + int i; + + for (i = 0; i < NR_CHANNELS; i++) { + tty_unregister_device(ipoctal->tty_drv, i); + tty_port_free_xmit_buf(&ipoctal->tty_port[i]); + } + + tty_unregister_driver(ipoctal->tty_drv); + put_tty_driver(ipoctal->tty_drv); + + /* Tell the carrier board to free all the resources for this device */ + if (ipoctal->dev->ops->remove_device != NULL) + ipoctal->dev->ops->remove_device(ipoctal->dev); + + list_del(&ipoctal->list); + kfree(ipoctal); +} + +static void ipoctal_remove(struct ipack_device *device) +{ + struct ipoctal *ipoctal, *next; + + list_for_each_entry_safe(ipoctal, next, &ipoctal_list, list) { + if (ipoctal->dev == device) + __ipoctal_remove(ipoctal); + } +} + +static struct ipack_driver_ops ipoctal_drv_ops = { + .match = ipoctal_match, + .probe = ipoctal_probe, + .remove = ipoctal_remove, +}; + +static int __init ipoctal_init(void) +{ + driver.owner = THIS_MODULE; + driver.ops = &ipoctal_drv_ops; + driver.driver.name = KBUILD_MODNAME; + ipack_driver_register(&driver); + return 0; +} + +static void __exit ipoctal_exit(void) +{ + struct ipoctal *p, *next; + + list_for_each_entry_safe(p, next, &ipoctal_list, list) + __ipoctal_remove(p); + + ipack_driver_unregister(&driver); +} + +MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver"); +MODULE_LICENSE("GPL"); + +module_init(ipoctal_init); +module_exit(ipoctal_exit); diff --git a/drivers/staging/ipack/devices/ipoctal.h b/drivers/staging/ipack/devices/ipoctal.h new file mode 100644 index 0000000..7c5d211 --- /dev/null +++ b/drivers/staging/ipack/devices/ipoctal.h @@ -0,0 +1,81 @@ +/** + * ipoctal.h + * + * driver for the IPOCTAL boards + * Copyright (c) 2009 Nicolas Serafini, EIC2 SA + * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN + * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#ifndef _IPOCTAL_H +#define _IPOCTAL_H_ + +#define NR_CHANNELS 8 +#define IPOCTAL_MAX_BOARDS 16 +#define MAX_DEVICES (NR_CHANNELS * IPOCTAL_MAX_BOARDS) +#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +/** + * enum uart_parity_e - UART supported parity. + */ +enum uart_parity_e { + UART_NONE = 0, + UART_ODD = 1, + UART_EVEN = 2, +}; + +/** + * enum uart_error - UART error type + * + */ +enum uart_error { + UART_NOERROR = 0, /* No error during transmission */ + UART_TIMEOUT = 1 << 0, /* Timeout error */ + UART_OVERRUN = 1 << 1, /* Overrun error */ + UART_PARITY = 1 << 2, /* Parity error */ + UART_FRAMING = 1 << 3, /* Framing error */ + UART_BREAK = 1 << 4, /* Received break */ +}; + +/** + * struct ipoctal_config - Serial configuration + * + * @baud: Baud rate + * @stop_bits: Stop bits (1 or 2) + * @bits_per_char: data size in bits + * @parity + * @flow_control: Flow control management (RTS/CTS) (0 disabled, 1 enabled) + */ +struct ipoctal_config { + unsigned int baud; + unsigned int stop_bits; + unsigned int bits_per_char; + unsigned short parity; + unsigned int flow_control; +}; + +/** + * struct ipoctal_stats -- Stats since last reset + * + * @tx: Number of transmitted bytes + * @rx: Number of received bytes + * @overrun: Number of overrun errors + * @parity_err: Number of parity errors + * @framing_err: Number of framing errors + * @rcv_break: Number of break received + */ +struct ipoctal_stats { + unsigned long tx; + unsigned long rx; + unsigned long overrun_err; + unsigned long parity_err; + unsigned long framing_err; + unsigned long rcv_break; +}; + +#endif /* _IPOCTAL_H_ */ diff --git a/drivers/staging/ipack/devices/scc2698.h b/drivers/staging/ipack/devices/scc2698.h new file mode 100644 index 0000000..e683019 --- /dev/null +++ b/drivers/staging/ipack/devices/scc2698.h @@ -0,0 +1,229 @@ +/* + * scc2698.h + * + * driver for the IPOCTAL boards + * Copyright (c) 2009 Nicolas Serafini, EIC2 SA + * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN + * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#ifndef SCC2698_H_ +#define SCC2698_H_ + +/* + * struct scc2698_channel - Channel access to scc2698 IO + * + * dn value are only spacer. + * + */ +struct scc2698_channel { + union { + struct { + unsigned char d0, mr; /* Mode register 1/2*/ + unsigned char d1, sr; /* Status register */ + unsigned char d2, r1; /* reserved */ + unsigned char d3, rhr; /* Receive holding register (R) */ + unsigned char junk[8]; /* other crap for block control */ + } r; /* Read access */ + struct { + unsigned char d0, mr; /* Mode register 1/2 */ + unsigned char d1, csr; /* Clock select register */ + unsigned char d2, cr; /* Command register */ + unsigned char d3, thr; /* Transmit holding register */ + unsigned char junk[8]; /* other crap for block control */ + } w; /* Write access */ + } u; +}; + +/* + * struct scc2698_block - Block access to scc2698 IO + * + * The scc2698 contain 4 block. + * Each block containt two channel a and b. + * dn value are only spacer. + * + */ +struct scc2698_block { + union { + struct { + unsigned char d0, mra; /* Mode register 1/2 (a) */ + unsigned char d1, sra; /* Status register (a) */ + unsigned char d2, r1; /* reserved */ + unsigned char d3, rhra; /* Receive holding register (a) */ + unsigned char d4, ipcr; /* Input port change register of block */ + unsigned char d5, isr; /* Interrupt status register of block */ + unsigned char d6, ctur; /* Counter timer upper register of block */ + unsigned char d7, ctlr; /* Counter timer lower register of block */ + unsigned char d8, mrb; /* Mode register 1/2 (b) */ + unsigned char d9, srb; /* Status register (b) */ + unsigned char da, r2; /* reserved */ + unsigned char db, rhrb; /* Receive holding register (b) */ + unsigned char dc, r3; /* reserved */ + unsigned char dd, ip; /* Input port register of block */ + unsigned char de, ctg; /* Start counter timer of block */ + unsigned char df, cts; /* Stop counter timer of block */ + } r; /* Read access */ + struct { + unsigned char d0, mra; /* Mode register 1/2 (a) */ + unsigned char d1, csra; /* Clock select register (a) */ + unsigned char d2, cra; /* Command register (a) */ + unsigned char d3, thra; /* Transmit holding register (a) */ + unsigned char d4, acr; /* Auxiliary control register of block */ + unsigned char d5, imr; /* Interrupt mask register of block */ + unsigned char d6, ctu; /* Counter timer upper register of block */ + unsigned char d7, ctl; /* Counter timer lower register of block */ + unsigned char d8, mrb; /* Mode register 1/2 (b) */ + unsigned char d9, csrb; /* Clock select register (a) */ + unsigned char da, crb; /* Command register (b) */ + unsigned char db, thrb; /* Transmit holding register (b) */ + unsigned char dc, r1; /* reserved */ + unsigned char dd, opcr; /* Output port configuration register of block */ + unsigned char de, r2; /* reserved */ + unsigned char df, r3; /* reserved */ + } w; /* Write access */ + } u; +} ; + +#define MR1_CHRL_5_BITS (0x0 << 0) +#define MR1_CHRL_6_BITS (0x1 << 0) +#define MR1_CHRL_7_BITS (0x2 << 0) +#define MR1_CHRL_8_BITS (0x3 << 0) +#define MR1_PARITY_EVEN (0x1 << 2) +#define MR1_PARITY_ODD (0x0 << 2) +#define MR1_PARITY_ON (0x0 << 3) +#define MR1_PARITY_FORCE (0x1 << 3) +#define MR1_PARITY_OFF (0x2 << 3) +#define MR1_PARITY_SPECIAL (0x3 << 3) +#define MR1_ERROR_CHAR (0x0 << 5) +#define MR1_ERROR_BLOCK (0x1 << 5) +#define MR1_RxINT_RxRDY (0x0 << 6) +#define MR1_RxINT_FFULL (0x1 << 6) +#define MR1_RxRTS_CONTROL_ON (0x1 << 7) +#define MR1_RxRTS_CONTROL_OFF (0x0 << 7) + +#define MR2_STOP_BITS_LENGTH_1 (0x7 << 0) +#define MR2_STOP_BITS_LENGTH_2 (0xF << 0) +#define MR2_CTS_ENABLE_TX_ON (0x1 << 4) +#define MR2_CTS_ENABLE_TX_OFF (0x0 << 4) +#define MR2_TxRTS_CONTROL_ON (0x1 << 5) +#define MR2_TxRTS_CONTROL_OFF (0x0 << 5) +#define MR2_CH_MODE_NORMAL (0x0 << 6) +#define MR2_CH_MODE_ECHO (0x1 << 6) +#define MR2_CH_MODE_LOCAL (0x2 << 6) +#define MR2_CH_MODE_REMOTE (0x3 << 6) + +#define CR_ENABLE_RX (0x1 << 0) +#define CR_DISABLE_RX (0x1 << 1) +#define CR_ENABLE_TX (0x1 << 2) +#define CR_DISABLE_TX (0x1 << 3) +#define CR_CMD_RESET_MR (0x1 << 4) +#define CR_CMD_RESET_RX (0x2 << 4) +#define CR_CMD_RESET_TX (0x3 << 4) +#define CR_CMD_RESET_ERR_STATUS (0x4 << 4) +#define CR_CMD_RESET_BREAK_CHANGE (0x5 << 4) +#define CR_CMD_START_BREAK (0x6 << 4) +#define CR_CMD_STOP_BREAK (0x7 << 4) +#define CR_CMD_ASSERT_RTSN (0x8 << 4) +#define CR_CMD_NEGATE_RTSN (0x9 << 4) +#define CR_CMD_SET_TIMEOUT_MODE (0xA << 4) +#define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4) + +#define SR_RX_READY (0x1 << 0) +#define SR_FIFO_FULL (0x1 << 1) +#define SR_TX_READY (0x1 << 2) +#define SR_TX_EMPTY (0x1 << 3) +#define SR_OVERRUN_ERROR (0x1 << 4) +#define SR_PARITY_ERROR (0x1 << 5) +#define SR_FRAMING_ERROR (0x1 << 6) +#define SR_RECEIVED_BREAK (0x1 << 7) + +#define SR_ERROR (0xF0) + +#define ACR_DELTA_IP0_IRQ_EN (0x1 << 0) +#define ACR_DELTA_IP1_IRQ_EN (0x1 << 1) +#define ACR_DELTA_IP2_IRQ_EN (0x1 << 2) +#define ACR_DELTA_IP3_IRQ_EN (0x1 << 3) +#define ACR_CT_Mask (0x7 << 4) +#define ACR_CExt (0x0 << 4) +#define ACR_CTxCA (0x1 << 4) +#define ACR_CTxCB (0x2 << 4) +#define ACR_CClk16 (0x3 << 4) +#define ACR_TExt (0x4 << 4) +#define ACR_TExt16 (0x5 << 4) +#define ACR_TClk (0x6 << 4) +#define ACR_TClk16 (0x7 << 4) +#define ACR_BRG_SET1 (0x0 << 7) +#define ACR_BRG_SET2 (0x1 << 7) + +#define TX_CLK_75 (0x0 << 0) +#define TX_CLK_110 (0x1 << 0) +#define TX_CLK_38400 (0x2 << 0) +#define TX_CLK_150 (0x3 << 0) +#define TX_CLK_300 (0x4 << 0) +#define TX_CLK_600 (0x5 << 0) +#define TX_CLK_1200 (0x6 << 0) +#define TX_CLK_2000 (0x7 << 0) +#define TX_CLK_2400 (0x8 << 0) +#define TX_CLK_4800 (0x9 << 0) +#define TX_CLK_1800 (0xA << 0) +#define TX_CLK_9600 (0xB << 0) +#define TX_CLK_19200 (0xC << 0) +#define RX_CLK_75 (0x0 << 4) +#define RX_CLK_110 (0x1 << 4) +#define RX_CLK_38400 (0x2 << 4) +#define RX_CLK_150 (0x3 << 4) +#define RX_CLK_300 (0x4 << 4) +#define RX_CLK_600 (0x5 << 4) +#define RX_CLK_1200 (0x6 << 4) +#define RX_CLK_2000 (0x7 << 4) +#define RX_CLK_2400 (0x8 << 4) +#define RX_CLK_4800 (0x9 << 4) +#define RX_CLK_1800 (0xA << 4) +#define RX_CLK_9600 (0xB << 4) +#define RX_CLK_19200 (0xC << 4) + +#define OPCR_MPOa_RTSN (0x0 << 0) +#define OPCR_MPOa_C_TO (0x1 << 0) +#define OPCR_MPOa_TxC1X (0x2 << 0) +#define OPCR_MPOa_TxC16X (0x3 << 0) +#define OPCR_MPOa_RxC1X (0x4 << 0) +#define OPCR_MPOa_RxC16X (0x5 << 0) +#define OPCR_MPOa_TxRDY (0x6 << 0) +#define OPCR_MPOa_RxRDY_FF (0x7 << 0) + +#define OPCR_MPOb_RTSN (0x0 << 4) +#define OPCR_MPOb_C_TO (0x1 << 4) +#define OPCR_MPOb_TxC1X (0x2 << 4) +#define OPCR_MPOb_TxC16X (0x3 << 4) +#define OPCR_MPOb_RxC1X (0x4 << 4) +#define OPCR_MPOb_RxC16X (0x5 << 4) +#define OPCR_MPOb_TxRDY (0x6 << 4) +#define OPCR_MPOb_RxRDY_FF (0x7 << 4) + +#define OPCR_MPP_INPUT (0x0 << 7) +#define OPCR_MPP_OUTPUT (0x1 << 7) + +#define IMR_TxRDY_A (0x1 << 0) +#define IMR_RxRDY_FFULL_A (0x1 << 1) +#define IMR_DELTA_BREAK_A (0x1 << 2) +#define IMR_COUNTER_READY (0x1 << 3) +#define IMR_TxRDY_B (0x1 << 4) +#define IMR_RxRDY_FFULL_B (0x1 << 5) +#define IMR_DELTA_BREAK_B (0x1 << 6) +#define IMR_INPUT_PORT_CHANGE (0x1 << 7) + +#define ISR_TxRDY_A (0x1 << 0) +#define ISR_RxRDY_FFULL_A (0x1 << 1) +#define ISR_DELTA_BREAK_A (0x1 << 2) +#define ISR_COUNTER_READY (0x1 << 3) +#define ISR_TxRDY_B (0x1 << 4) +#define ISR_RxRDY_FFULL_B (0x1 << 5) +#define ISR_DELTA_BREAK_B (0x1 << 6) +#define ISR_INPUT_PORT_CHANGE (0x1 << 7) + +#endif /* SCC2698_H_ */ |