Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
  staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
  staging:iio:kfifo_buf fix double initialization of the ring device structure.
  staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
  staging:iio:imu fix missing register table index for some channels
  spectra: enable device before poking it
  staging: rts_pstor: Fix a miswriting
  staging/lirc_bt829: Return -ENODEV when no hardware is found.
  staging/lirc_parallel: remove pointless prototypes.
  staging/lirc_parallel: fix panic on rmmod
  staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
  Staging: zram: Fix kunmapping order
  Revert "gma500: Fix dependencies"
  gma500: Add medfield header
  gma500: wire up the mrst i2c bus from chip_info
  gma500: Fix DPU build
  gma500: Clean up the DPU config and make it runtime
  gma500: resync with Medfield progress
  gma500: Use the mrst helpers and power control for mode commit
  gma500@ Fix backlight range error
  gma500: More Moorestown muddle meddling means MM maybe might modeset
  ...

Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
 - Documentation/feature-removal-schedule.txt
 - drivers/staging/bcm/headers.h
 - drivers/staging/brcm80211/brcmfmac/dhd_linux.c
 - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
 - drivers/staging/brcm80211/brcmfmac/wl_iw.c
 - drivers/staging/et131x/et131x_netdev.c
 - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
 - drivers/staging/rtl8192e/r8192E.h
 - drivers/staging/usbip/userspace/src/utils.h

1 files changed, 0 insertions, 831 deletions

diff --git a/drivers/staging/generic_serial/ser_a2232.c b/drivers/staging/generic_serial/ser_a2232.c
deleted file mode 100644
index 3f47c2e..0000000
--- a/drivers/staging/generic_serial/ser_a2232.c
+++ /dev/null
@@ -1,831 +0,0 @@
-/* drivers/char/ser_a2232.c */
-
-/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */
-
-/* Linux serial driver for the Amiga A2232 board */
-
-/* This driver is MAINTAINED. Before applying any changes, please contact
- * the author.
- */
-
-/* Copyright (c) 2000-2001 Enver Haase    <ehaase@inf.fu-berlin.de>
- *                   alias The A2232 driver project <A2232@gmx.net>
- * All rights reserved.
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-/***************************** Documentation ************************/
-/*
- * This driver is in EXPERIMENTAL state. That means I could not find
- * someone with five A2232 boards with 35 ports running at 19200 bps
- * at the same time and test the machine's behaviour.
- * However, I know that you can performance-tweak this driver (see
- * the source code).
- * One thing to consider is the time this driver consumes during the
- * Amiga's vertical blank interrupt. Everything that is to be done
- * _IS DONE_ when entering the vertical blank interrupt handler of
- * this driver.
- * However, it would be more sane to only do the job for only ONE card
- * instead of ALL cards at a time; or, more generally, to handle only
- * SOME ports instead of ALL ports at a time.
- * However, as long as no-one runs into problems I guess I shouldn't
- * change the driver as it runs fine for me :) .
- *
- * Version history of this file:
- * 0.4	Resolved licensing issues.
- * 0.3	Inclusion in the Linux/m68k tree, small fixes.
- * 0.2	Added documentation, minor typo fixes.
- * 0.1	Initial release.
- *
- * TO DO:
- * -	Handle incoming BREAK events. I guess "Stevens: Advanced
- *	Programming in the UNIX(R) Environment" is a good reference
- *	on what is to be done.
- * -	When installing as a module, don't simply 'printk' text, but
- *	send it to the TTY used by the user.
- *
- * THANKS TO:
- * -	Jukka Marin (65EC02 code).
- * -	The other NetBSD developers on whose A2232 driver I had a
- *	pretty close look. However, I didn't copy any code so it
- *	is okay to put my code under the GPL and include it into
- *	Linux.
- */
-/***************************** End of Documentation *****************/
-
-/***************************** Defines ******************************/
-/*
- * Enables experimental 115200 (normal) 230400 (turbo) baud rate.
- * The A2232 specification states it can only operate at speeds up to
- * 19200 bits per second, and I was not able to send a file via
- * "sz"/"rz" and a null-modem cable from one A2232 port to another
- * at 115200 bits per second.
- * However, this might work for you.
- */
-#undef A2232_SPEEDHACK
-/*
- * Default is not to use RTS/CTS so you could be talked to death.
- */
-#define A2232_SUPPRESS_RTSCTS_WARNING
-/************************* End of Defines ***************************/
-
-/***************************** Includes *****************************/
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-
-#include <asm/setup.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <linux/mutex.h>
-
-#include <linux/delay.h>
-
-#include <linux/serial.h>
-#include <linux/generic_serial.h>
-#include <linux/tty_flip.h>
-
-#include "ser_a2232.h"
-#include "ser_a2232fw.h"
-/************************* End of Includes **************************/
-
-/***************************** Prototypes ***************************/
-/* The interrupt service routine */
-static irqreturn_t a2232_vbl_inter(int irq, void *data);
-/* Initialize the port structures */
-static void a2232_init_portstructs(void);
-/* Initialize and register TTY drivers. */
-/* returns 0 IFF successful */
-static int a2232_init_drivers(void); 
-
-/* BEGIN GENERIC_SERIAL PROTOTYPES */
-static void a2232_disable_tx_interrupts(void *ptr);
-static void a2232_enable_tx_interrupts(void *ptr);
-static void a2232_disable_rx_interrupts(void *ptr);
-static void a2232_enable_rx_interrupts(void *ptr);
-static int  a2232_carrier_raised(struct tty_port *port);
-static void a2232_shutdown_port(void *ptr);
-static int  a2232_set_real_termios(void *ptr);
-static int  a2232_chars_in_buffer(void *ptr);
-static void a2232_close(void *ptr);
-static void a2232_hungup(void *ptr);
-/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */
-/* END GENERIC_SERIAL PROTOTYPES */
-
-/* Functions that the TTY driver struct expects */
-static int  a2232_ioctl(struct tty_struct *tty,
-				unsigned int cmd, unsigned long arg);
-static void a2232_throttle(struct tty_struct *tty);
-static void a2232_unthrottle(struct tty_struct *tty);
-static int  a2232_open(struct tty_struct * tty, struct file * filp);
-/************************* End of Prototypes ************************/
-
-/***************************** Global variables *********************/
-/*---------------------------------------------------------------------------
- * Interface from generic_serial.c back here
- *--------------------------------------------------------------------------*/
-static struct real_driver a2232_real_driver = {
-        a2232_disable_tx_interrupts,
-        a2232_enable_tx_interrupts,
-        a2232_disable_rx_interrupts,
-        a2232_enable_rx_interrupts,
-        a2232_shutdown_port,
-        a2232_set_real_termios,
-        a2232_chars_in_buffer,
-        a2232_close,
-        a2232_hungup,
-	NULL	/* a2232_getserial */
-};
-
-static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own.
-
-/* Ports structs */
-static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES];
-
-/* TTY driver structs */
-static struct tty_driver *a2232_driver;
-
-/* nr of cards completely (all ports) and correctly configured */
-static int nr_a2232; 
-
-/* zorro_dev structs for the A2232's */
-static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS]; 
-/***************************** End of Global variables **************/
-
-/* Helper functions */
-
-static inline volatile struct a2232memory *a2232mem(unsigned int board)
-{
-	return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start);
-}
-
-static inline volatile struct a2232status *a2232stat(unsigned int board,
-						     unsigned int portonboard)
-{
-	volatile struct a2232memory *mem = a2232mem(board);
-	return &(mem->Status[portonboard]);
-}
-
-static inline void a2232_receive_char(struct a2232_port *port, int ch, int err)
-{
-/* 	Mostly stolen from other drivers.
-	Maybe one could implement a more efficient version by not only
-	transferring one character at a time.
-*/
-	struct tty_struct *tty = port->gs.port.tty;
-
-#if 0
-	switch(err) {
-	case TTY_BREAK:
-		break;
-	case TTY_PARITY:
-		break;
-	case TTY_OVERRUN:
-		break;
-	case TTY_FRAME:
-		break;
-	}
-#endif
-
-	tty_insert_flip_char(tty, ch, err);
-	tty_flip_buffer_push(tty);
-}
-
-/***************************** Functions ****************************/
-/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/
-
-static void a2232_disable_tx_interrupts(void *ptr)
-{
-	struct a2232_port *port;
-	volatile struct a2232status *stat;
-	unsigned long flags;
-  
-	port = ptr;
-	stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
-	stat->OutDisable = -1;
-
-	/* Does this here really have to be? */
-	local_irq_save(flags);
-	port->gs.port.flags &= ~GS_TX_INTEN;
-	local_irq_restore(flags);
-}
-
-static void a2232_enable_tx_interrupts(void *ptr)
-{
-	struct a2232_port *port;
-	volatile struct a2232status *stat;
-	unsigned long flags;
-
-	port = ptr;
-	stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
-	stat->OutDisable = 0;
-
-	/* Does this here really have to be? */
-	local_irq_save(flags);
-	port->gs.port.flags |= GS_TX_INTEN;
-	local_irq_restore(flags);
-}
-
-static void a2232_disable_rx_interrupts(void *ptr)
-{
-	struct a2232_port *port;
-	port = ptr;
-	port->disable_rx = -1;
-}
-
-static void a2232_enable_rx_interrupts(void *ptr)
-{
-	struct a2232_port *port;
-	port = ptr;
-	port->disable_rx = 0;
-}
-
-static int  a2232_carrier_raised(struct tty_port *port)
-{
-	struct a2232_port *ap = container_of(port, struct a2232_port, gs.port);
-	return ap->cd_status;
-}
-
-static void a2232_shutdown_port(void *ptr)
-{
-	struct a2232_port *port;
-	volatile struct a2232status *stat;
-	unsigned long flags;
-
-	port = ptr;
-	stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
-
-	local_irq_save(flags);
-
-	port->gs.port.flags &= ~GS_ACTIVE;
-	
-	if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
-		/* Set DTR and RTS to Low, flush output.
-		   The NetBSD driver "msc.c" does it this way. */
-		stat->Command = (	(stat->Command & ~A2232CMD_CMask) | 
-					A2232CMD_Close );
-		stat->OutFlush = -1;
-		stat->Setup = -1;
-	}
-
-	local_irq_restore(flags);
-	
-	/* After analyzing control flow, I think a2232_shutdown_port
-		is actually the last call from the system when at application
-		level someone issues a "echo Hello >>/dev/ttyY0".
-		Therefore I think the MOD_DEC_USE_COUNT should be here and
-		not in "a2232_close()". See the comment in "sx.c", too.
-		If you run into problems, compile this driver into the
-		kernel instead of compiling it as a module. */
-}
-
-static int  a2232_set_real_termios(void *ptr)
-{
-	unsigned int cflag, baud, chsize, stopb, parity, softflow;
-	int rate;
-	int a2232_param, a2232_cmd;
-	unsigned long flags;
-	unsigned int i;
-	struct a2232_port *port = ptr;
-	volatile struct a2232status *status;
-	volatile struct a2232memory *mem;
-
-	if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
-
-	status = a2232stat(port->which_a2232, port->which_port_on_a2232);
-	mem = a2232mem(port->which_a2232);
-	
-	a2232_param = a2232_cmd = 0;
-
-	// get baud rate
-	baud = port->gs.baud;
-	if (baud == 0) {
-		/* speed == 0 -> drop DTR, do nothing else */
-		local_irq_save(flags);
-		// Clear DTR (and RTS... mhhh).
-		status->Command = (	(status->Command & ~A2232CMD_CMask) |
-					A2232CMD_Close );
-		status->OutFlush = -1;
-		status->Setup = -1;
-		
-		local_irq_restore(flags);
-		return 0;
-	}
-	
-	rate = A2232_BAUD_TABLE_NOAVAIL;
-	for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){
-		if (a2232_baud_table[i] == baud){
-			if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2];
-			else                                    rate = a2232_baud_table[i+1];
-		}
-	}
-	if (rate == A2232_BAUD_TABLE_NOAVAIL){
-		printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud);
-		// This is useful for both (turbo or normal) Crystal versions.
-		rate = A2232PARAM_B9600;
-	}
-	a2232_param |= rate;
-
-	cflag  = port->gs.port.tty->termios->c_cflag;
-
-	// get character size
-	chsize = cflag & CSIZE;
-	switch (chsize){
-		case CS8: 	a2232_param |= A2232PARAM_8Bit; break;
-		case CS7: 	a2232_param |= A2232PARAM_7Bit; break;
-		case CS6: 	a2232_param |= A2232PARAM_6Bit; break;
-		case CS5: 	a2232_param |= A2232PARAM_5Bit; break;
-		default:	printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n",
-					port->which_a2232,port->which_port_on_a2232,chsize);
-				a2232_param |= A2232PARAM_8Bit; break;
-	}
-
-	// get number of stop bits
-	stopb  = cflag & CSTOPB;
-	if (stopb){ // two stop bits instead of one
-		printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n",
-			port->which_a2232,port->which_port_on_a2232);
-	}
-
-	// Warn if RTS/CTS not wanted
-	if (!(cflag & CRTSCTS)){
-#ifndef A2232_SUPPRESS_RTSCTS_WARNING
-		printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n",
-			port->which_a2232,port->which_port_on_a2232);
-#endif
-	}
-
-	/*	I think this is correct.
-		However, IXOFF means _input_ flow control and I wonder
-		if one should care about IXON _output_ flow control,
-		too. If this makes problems, one should turn the A2232
-		firmware XON/XOFF "SoftFlow" flow control off and use
-		the conventional way of inserting START/STOP characters
-		by hand in throttle()/unthrottle().
-	*/
-	softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF );
-
-	// get Parity (Enabled/Disabled? If Enabled, Odd or Even?)
-	parity = cflag & (PARENB | PARODD);
-	if (parity & PARENB){
-		if (parity & PARODD){
-			a2232_cmd |= A2232CMD_OddParity;
-		}
-		else{
-			a2232_cmd |= A2232CMD_EvenParity;
-		}
-	}
-	else a2232_cmd |= A2232CMD_NoParity;
-
-
-	/*	Hmm. Maybe an own a2232_port structure
-		member would be cleaner?	*/
-	if (cflag & CLOCAL)
-		port->gs.port.flags &= ~ASYNC_CHECK_CD;
-	else
-		port->gs.port.flags |= ASYNC_CHECK_CD;
-
-
-	/* Now we have all parameters and can go to set them: */
-	local_irq_save(flags);
-
-	status->Param = a2232_param | A2232PARAM_RcvBaud;
-	status->Command = a2232_cmd | A2232CMD_Open |  A2232CMD_Enable;
-	status->SoftFlow = softflow;
-	status->OutDisable = 0;
-	status->Setup = -1;
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int  a2232_chars_in_buffer(void *ptr)
-{
-	struct a2232_port *port;
-	volatile struct a2232status *status; 
-	unsigned char ret; /* we need modulo-256 arithmetics */
-	port = ptr;
-	status = a2232stat(port->which_a2232, port->which_port_on_a2232);
-#if A2232_IOBUFLEN != 256
-#error "Re-Implement a2232_chars_in_buffer()!"
-#endif
-	ret = (status->OutHead - status->OutTail);
-	return ret;
-}
-
-static void a2232_close(void *ptr)
-{
-	a2232_disable_tx_interrupts(ptr);
-	a2232_disable_rx_interrupts(ptr);
-	/* see the comment in a2232_shutdown_port above. */
-}
-
-static void a2232_hungup(void *ptr)
-{
-	a2232_close(ptr);
-}
-/*** END   OF REAL_DRIVER FUNCTIONS ***/
-
-/*** BEGIN  FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-static int a2232_ioctl(	struct tty_struct *tty,
-			unsigned int cmd, unsigned long arg)
-{
-	return -ENOIOCTLCMD;
-}
-
-static void a2232_throttle(struct tty_struct *tty)
-{
-/* Throttle: System cannot take another chars: Drop RTS or
-             send the STOP char or whatever.
-   The A2232 firmware does RTS/CTS anyway, and XON/XOFF
-   if switched on. So the only thing we can do at this
-   layer here is not taking any characters out of the
-   A2232 buffer any more. */
-	struct a2232_port *port = tty->driver_data;
-	port->throttle_input = -1;
-}
-
-static void a2232_unthrottle(struct tty_struct *tty)
-{
-/* Unthrottle: dual to "throttle()" above. */
-	struct a2232_port *port = tty->driver_data;
-	port->throttle_input = 0;
-}
-
-static int  a2232_open(struct tty_struct * tty, struct file * filp)
-{
-/* More or less stolen from other drivers. */
-	int line;
-	int retval;
-	struct a2232_port *port;
-
-	line = tty->index;
-	port = &a2232_ports[line];
-	
-	tty->driver_data = port;
-	port->gs.port.tty = tty;
-	port->gs.port.count++;
-	retval = gs_init_port(&port->gs);
-	if (retval) {
-		port->gs.port.count--;
-		return retval;
-	}
-	port->gs.port.flags |= GS_ACTIVE;
-	retval = gs_block_til_ready(port, filp);
-
-	if (retval) {
-		port->gs.port.count--;
-		return retval;
-	}
-
-	a2232_enable_rx_interrupts(port);
-	
-	return 0;
-}
-/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-
-static irqreturn_t a2232_vbl_inter(int irq, void *data)
-{
-#if A2232_IOBUFLEN != 256
-#error "Re-Implement a2232_vbl_inter()!"
-#endif
-
-struct a2232_port *port;
-volatile struct a2232memory *mem;
-volatile struct a2232status *status;
-unsigned char newhead;
-unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */
-unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */
-volatile u_char *ibuf, *cbuf, *obuf;
-int ch, err, n, p;
-	for (n = 0; n < nr_a2232; n++){		/* for every completely initialized A2232 board */
-		mem = a2232mem(n);
-		for (p = 0; p < NUMLINES; p++){	/* for every port on this board */
-			err = 0;
-			port = &a2232_ports[n*NUMLINES+p];
-			if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */
-
-				status = a2232stat(n,p);
-
-				if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */
-					newhead = status->InHead;               /* 65EC02 write pointer */
-					bufpos = status->InTail;
-
-					/* check for input for this port */
-					if (newhead != bufpos) {
-						/* buffer for input chars/events */
-						ibuf = mem->InBuf[p];
- 
-						/* data types of bytes in ibuf */
-						cbuf = mem->InCtl[p];
- 
-						/* do for all chars */
-						while (bufpos != newhead) {
-							/* which type of input data? */
-							switch (cbuf[bufpos]) {
-								/* switch on input event (CD, BREAK, etc.) */
-							case A2232INCTL_EVENT:
-								switch (ibuf[bufpos++]) {
-								case A2232EVENT_Break:
-									/* TODO: Handle BREAK signal */
-									break;
-									/*	A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are
-										handled in a separate queue and should not occur here. */
-								case A2232EVENT_Sync:
-									printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring.");
-									break;
-								default:
-									printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]);
-								} /* event type switch */
-								break;
- 							case A2232INCTL_CHAR:
-								/* Receive incoming char */
-								a2232_receive_char(port, ibuf[bufpos], err);
-								bufpos++;
-								break;
- 							default:
-								printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]);
-								bufpos++;
-							} /* switch on input data type */
-						} /* while there's something in the buffer */
-
-						status->InTail = bufpos;            /* tell 65EC02 what we've read */
-						
-					} /* if there was something in the buffer */                          
-				} /* If input is not disabled */
-
-				/* Now check if there's something to output */
-				obuf = mem->OutBuf[p];
-				bufpos = status->OutHead;
-				while ( (port->gs.xmit_cnt > 0)		&&
-					(!port->gs.port.tty->stopped)	&&
-					(!port->gs.port.tty->hw_stopped) ){	/* While there are chars to transmit */
-					if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */
-						ch = port->gs.xmit_buf[port->gs.xmit_tail];					/* get the next char to transmit */
-						port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */
-						obuf[bufpos++] = ch;																/* put it into the A2232 buffer */
-						port->gs.xmit_cnt--;
-					}
-					else{																									/* If A2232 the buffer is full */
-						break;																							/* simply stop filling it. */
-					}													
-				}					
-				status->OutHead = bufpos;
-					
-				/* WakeUp if output buffer runs low */
-				if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) {
-					tty_wakeup(port->gs.port.tty);
-				}
-			} // if the port is used
-		} // for every port on the board
-			
-		/* Now check the CD message queue */
-		newhead = mem->Common.CDHead;
-		bufpos = mem->Common.CDTail;
-		if (newhead != bufpos){				/* There are CD events in queue */
-			ocd = mem->Common.CDStatus; 		/* get old status bits */
-			while (newhead != bufpos){		/* read all events */
-				ncd = mem->CDBuf[bufpos++]; 	/* get one event */
-				ccd = ncd ^ ocd; 		/* mask of changed lines */
-				ocd = ncd; 			/* save new status bits */
-				for(p=0; p < NUMLINES; p++){	/* for all ports */
-					if (ccd & 1){		/* this one changed */
-
-						struct a2232_port *port = &a2232_ports[n*7+p];
-						port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */
-
-						if (!(port->gs.port.flags & ASYNC_CHECK_CD))
-							;	/* Don't report DCD changes */
-						else if (port->cd_status) { // if DCD on: DCD went UP!
-							
-							/* Are we blocking in open?*/
-							wake_up_interruptible(&port->gs.port.open_wait);
-						}
-						else { // if DCD off: DCD went DOWN!
-							if (port->gs.port.tty)
-								tty_hangup (port->gs.port.tty);
-						}
-						
-					} // if CD changed for this port
-					ccd >>= 1;
-					ncd >>= 1;									/* Shift bits for next line */
-				} // for every port
-			} // while CD events in queue
-			mem->Common.CDStatus = ocd; /* save new status */
-			mem->Common.CDTail = bufpos; /* remove events */
-		} // if events in CD queue
-		
-	} // for every completely initialized A2232 board
-	return IRQ_HANDLED;
-}
-
-static const struct tty_port_operations a2232_port_ops = {
-	.carrier_raised = a2232_carrier_raised,
-};
-
-static void a2232_init_portstructs(void)
-{
-	struct a2232_port *port;
-	int i;
-
-	for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) {
-		port = a2232_ports + i;
-		tty_port_init(&port->gs.port);
-		port->gs.port.ops = &a2232_port_ops;
-		port->which_a2232 = i/NUMLINES;
-		port->which_port_on_a2232 = i%NUMLINES;
-		port->disable_rx = port->throttle_input = port->cd_status = 0;
-		port->gs.magic = A2232_MAGIC;
-		port->gs.close_delay = HZ/2;
-		port->gs.closing_wait = 30 * HZ;
-		port->gs.rd = &a2232_real_driver;
-	}
-}
-
-static const struct tty_operations a2232_ops = {
-	.open = a2232_open,
-	.close = gs_close,
-	.write = gs_write,
-	.put_char = gs_put_char,
-	.flush_chars = gs_flush_chars,
-	.write_room = gs_write_room,
-	.chars_in_buffer = gs_chars_in_buffer,
-	.flush_buffer = gs_flush_buffer,
-	.ioctl = a2232_ioctl,
-	.throttle = a2232_throttle,
-	.unthrottle = a2232_unthrottle,
-	.set_termios = gs_set_termios,
-	.stop = gs_stop,
-	.start = gs_start,
-	.hangup = gs_hangup,
-};
-
-static int a2232_init_drivers(void)
-{
-	int error;
-
-	a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232);
-	if (!a2232_driver)
-		return -ENOMEM;
-	a2232_driver->owner = THIS_MODULE;
-	a2232_driver->driver_name = "commodore_a2232";
-	a2232_driver->name = "ttyY";
-	a2232_driver->major = A2232_NORMAL_MAJOR;
-	a2232_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	a2232_driver->subtype = SERIAL_TYPE_NORMAL;
-	a2232_driver->init_termios = tty_std_termios;
-	a2232_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	a2232_driver->init_termios.c_ispeed = 9600;
-	a2232_driver->init_termios.c_ospeed = 9600;
-	a2232_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(a2232_driver, &a2232_ops);
-	if ((error = tty_register_driver(a2232_driver))) {
-		printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n",
-		       error);
-		put_tty_driver(a2232_driver);
-		return 1;
-	}
-	return 0;
-}
-
-static int __init a2232board_init(void)
-{
-	struct zorro_dev *z;
-
-	unsigned int boardaddr;
-	int bcount;
-	short start;
-	u_char *from;
-	volatile u_char *to;
-	volatile struct a2232memory *mem;
-	int error, i;
-
-#ifdef CONFIG_SMP
-	return -ENODEV;	/* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */
-#endif
-
-	if (!MACH_IS_AMIGA){
-		return -ENODEV;
-	}
-
-	printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */
-
-	z = NULL;
-	nr_a2232 = 0;
-	while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){
-		if (	(z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) && 
-			(z->id != ZORRO_PROD_CBM_A2232)	){
-			continue;	// The board found was no A2232
-		}
-		if (!zorro_request_device(z,"A2232 driver"))
-			continue;
-
-		printk("Commodore A2232 found (#%d).\n",nr_a2232);
-
-		zd_a2232[nr_a2232] = z;
-
-		boardaddr = ZTWO_VADDR( z->resource.start );
-		printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start)));
-
-		mem = (volatile struct a2232memory *) boardaddr;
-
-		(void) mem->Enable6502Reset;   /* copy the code across to the board */
-		to = (u_char *)mem;  from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2;
-		start = *(short *)from;
-		from += sizeof(start);
-		to += start;
-		while(bcount--) *to++ = *from++;
-		printk("65EC02 software uploaded to the A2232 memory.\n");
-  
-		mem->Common.Crystal = A2232_UNKNOWN;  /* use automatic speed check */
-  
-		/* start 6502 running */
-		(void) mem->ResetBoard;
-		printk("A2232's 65EC02 CPU up and running.\n");
-  
-		/* wait until speed detector has finished */
-		for (bcount = 0; bcount < 2000; bcount++) {
-			udelay(1000);
-			if (mem->Common.Crystal)
-				break;
-		}
-		printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: "));
-		switch (mem->Common.Crystal){
-		case A2232_UNKNOWN:
-			printk("Unknown crystal.\n");
-			break;
- 		case A2232_NORMAL:
-			printk ("Normal crystal.\n");
-			break;
-		case A2232_TURBO:
-			printk ("Turbo crystal.\n");
-			break;
-		default:
-			printk ("0x%x. Huh?\n",mem->Common.Crystal);
-		}
-
-		nr_a2232++;
-
-	}	
-
-	printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */
-
-	a2232_init_portstructs();
-
-	/*
-		a2232_init_drivers also registers the drivers. Must be here because all boards
-		have to be detected first.
-	*/
-	if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx?
-
-	error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0,
-			    "A2232 serial VBL", a2232_driver_ID);
-	if (error) {
-		for (i = 0; i < nr_a2232; i++)
-			zorro_release_device(zd_a2232[i]);
-		tty_unregister_driver(a2232_driver);
-		put_tty_driver(a2232_driver);
-	}
-	return error;
-}
-
-static void __exit a2232board_exit(void)
-{
-	int i;
-
-	for (i = 0; i < nr_a2232; i++) {
-		zorro_release_device(zd_a2232[i]);
-	}
-
-	tty_unregister_driver(a2232_driver);
-	put_tty_driver(a2232_driver);
-	free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID);
-}
-
-module_init(a2232board_init);
-module_exit(a2232board_exit);
-
-MODULE_AUTHOR("Enver Haase");
-MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver");
-MODULE_LICENSE("GPL");