Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
  staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
  staging:iio:kfifo_buf fix double initialization of the ring device structure.
  staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
  staging:iio:imu fix missing register table index for some channels
  spectra: enable device before poking it
  staging: rts_pstor: Fix a miswriting
  staging/lirc_bt829: Return -ENODEV when no hardware is found.
  staging/lirc_parallel: remove pointless prototypes.
  staging/lirc_parallel: fix panic on rmmod
  staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
  Staging: zram: Fix kunmapping order
  Revert "gma500: Fix dependencies"
  gma500: Add medfield header
  gma500: wire up the mrst i2c bus from chip_info
  gma500: Fix DPU build
  gma500: Clean up the DPU config and make it runtime
  gma500: resync with Medfield progress
  gma500: Use the mrst helpers and power control for mode commit
  gma500@ Fix backlight range error
  gma500: More Moorestown muddle meddling means MM maybe might modeset
  ...

Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
 - Documentation/feature-removal-schedule.txt
 - drivers/staging/bcm/headers.h
 - drivers/staging/brcm80211/brcmfmac/dhd_linux.c
 - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
 - drivers/staging/brcm80211/brcmfmac/wl_iw.c
 - drivers/staging/et131x/et131x_netdev.c
 - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
 - drivers/staging/rtl8192e/r8192E.h
 - drivers/staging/usbip/userspace/src/utils.h

2 files changed, 10 insertions, 435 deletions

diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
index 6a8a196..3f4207f 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
@@ -26,38 +26,6 @@
 #ifndef _FT1000IOCTLH_
 #define _FT1000IOCTLH_
 
-#define DSPVERSZ                4
-#define HWSERNUMSZ              16
-#define SKUSZ                   20
-#define EUISZ                   8
-#define CALVERSZ                2
-#define CALDATESZ               6
-
-#define MAX_DNLD_BLKSZ          1024
-
-// Standard Flarion Pseudo header
-struct pseudo_hdr {
-   unsigned short    length;           //length of msg body
-   unsigned char     source;           //source address (0x10=Host 0x20=DSP)
-   unsigned char     destination;      //destination address (refer to source address)
-   unsigned char     portdest;         //destination port id
-                                       //    0x00=Driver
-                                       //    0x10=Application Broadcast
-                                       //    0x20=Network Stack
-                                       //    0x80=Dsp OAM
-                                       //    0x90=Dsp Airlink
-                                       //    0xa0=Dsp Loader
-                                       //    0xb0=Dsp MIP
-   unsigned char     portsrc;          //source port id (refer to portdest)
-   unsigned short    sh_str_id;        //stream id (Not applicable on Mobile)
-   unsigned char     control;          //stream id (Not applicable on Mobile)
-   unsigned char     rsvd1;            //reserved
-   unsigned char     seq_num;          //sequence number
-   unsigned char     rsvd2;            //reserved
-   unsigned short    qos_class;        //Quality of Service class (Not applicable on Mobile)
-   unsigned short    checksum;         //Pseudo header checksum
-} __attribute__ ((packed));
-
 typedef struct _IOCTL_GET_VER
 {
     unsigned long drv_ver;
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
index 0b30020..51c0847 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
@@ -2,81 +2,18 @@
 #define _FT1000_USB_H_
 
 /*Jim*/
+#include "../ft1000.h"
 #include "ft1000_ioctl.h"
 #define FT1000_DRV_VER      0x01010403
 
-#define  MODESZ              2
 #define  MAX_NUM_APP         6
 #define  MAX_MSG_LIMIT       200
 #define  NUM_OF_FREE_BUFFERS 1500
 
-// Driver message types
-#define MEDIA_STATE        0x0010
-#define DSP_PROVISION      0x0030
-#define DSP_INIT_MSG       0x0050
-#define DSP_STORE_INFO       0x0070
-#define DSP_GET_INFO         0x0071
-#define GET_DRV_ERR_RPT_MSG  0x0073
-#define RSP_DRV_ERR_RPT_MSG  0x0074
-
-
-// Size of DPRAM Command
-#define MAX_CMD_SQSIZE          1780
-#define SLOWQ_TYPE              0
 #define PSEUDOSZ                16
-#define DSP_QID_OFFSET          4
-
-
-// MEMORY MAP FOR ELECTRABUZZ ASIC
-#define	FT1000_REG_DFIFO_STAT	0x0008	// Downlink FIFO status register
-#define	FT1000_REG_DPRAM_DATA	0x000C	// DPRAM VALUE in DPRAM ADDR
-
-#define FT1000_DSP_LED          0xFFA  // dsp led status for PAD device
-
-#define FT1000_MAG_DSP_LED               0x3FE   // dsp led status for PAD device
-#define FT1000_MAG_DSP_LED_INDX          0x1     // dsp led status for PAD device
 
 #define  SUCCESS             0x00
 
-
-#define DRIVERID                0x00
-
-// Driver Error Messages for DSP
-#define DSP_CONDRESET_INFO   0x7ef2
-#define DSP_HB_INFO          0x7ef0
-
-// Magnemite specific defines
-#define hi_mag                  0x6968  // Byte swap hi to avoid additional system call
-#define ho_mag                  0x6f68  // Byte swap ho to avoid additional system call
-
-
-
-struct media_msg {
-	struct pseudo_hdr pseudo;
-	u16 type;
-	u16 length;
-	u16 state;
-	u32 ip_addr;
-        u32 net_mask;
-	u32 gateway;
-	u32 dns_1;
-	u32 dns_2;
-} __attribute__ ((packed));
-
-struct dsp_init_msg {
-	struct pseudo_hdr pseudo;
-	u16 type;
-	u16 length;
-	u8 DspVer[DSPVERSZ];        // DSP version number
-	u8 HwSerNum[HWSERNUMSZ];    // Hardware Serial Number
-	u8 Sku[SKUSZ];              // SKU
-	u8 eui64[EUISZ];            // EUI64
-	u8 ProductMode[MODESZ];     // Product Mode (Market/Production)
-	u8 RfCalVer[CALVERSZ];      // Rf Calibration version
-	u8 RfCalDate[CALDATESZ];    // Rf Calibration date
-} __attribute__ ((packed));
-
-
 struct app_info_block {
 	u32 nTxMsg;                    // DPRAM msg sent to DSP with app_id
 	u32 nRxMsg;                    // DPRAM msg rcv from dsp with app_id
@@ -90,11 +27,6 @@ struct app_info_block {
 	struct list_head app_sqlist;   // link list of msgs for applicaton on slow queue
 } __attribute__((packed));
 
-struct prov_record {
-	struct list_head list;
-	u8 *pprov_data;
-};
-
 /*end of Jim*/
 #define DEBUG(args...) printk(KERN_INFO args)
 
@@ -108,350 +40,25 @@ struct prov_record {
 
 #define LARGE_TIMEOUT   5000
 
-#define MAX_DSP_SESS_REC        1024
-
-#define MAX_NUM_CARDS        32
-
-#define DSPVERSZ                4
-#define HWSERNUMSZ              16
-#define SKUSZ                   20
-#define EUISZ                   8
-#define CALVERSZ                2
-#define CALDATESZ               6
-#define MODESZ                  2
-
-#define DSPID                   0x20
-#define HOSTID                  0x10
-
-#define DSPOAM                  0x80
-#define DSPAIRID                0x90
-
-#define DRIVERID                0x00
-#define FMM                     0x10
-#define NETWORKID               0x20
-#define AUTOLNCHID              0x30
-#define DSPLPBKID               0x40
-
 #define DSPBCMSGID              0x10
 
-#define ENET_MAX_SIZE           1514
-#define ENET_HEADER_SIZE        14
-
-
-#define CIS_NET_ADDR_OFFSET 0xff0
-
-// MAGNEMITE specific
-
-#define FT1000_REG_MAG_UFDR 		0x0000	// Uplink FIFO Data Register.
-
-#define FT1000_REG_MAG_UFDRL		0x0000	// Uplink FIFO Data Register low-word.
-
-#define FT1000_REG_MAG_UFDRH		0x0002  // Uplink FIFO Data Register high-word.
-
-#define FT1000_REG_MAG_UFER			0x0004  // Uplink FIFO End Register
-
-#define FT1000_REG_MAG_UFSR			0x0006  // Uplink FIFO Status Register
-
-#define FT1000_REG_MAG_DFR			0x0008	// Downlink FIFO Register
-
-#define FT1000_REG_MAG_DFRL			0x0008	// Downlink FIFO Register low-word
-
-#define FT1000_REG_MAG_DFRH			0x000a  // Downlink FIFO Register high-word
-
-#define FT1000_REG_MAG_DFSR			0x000c  // Downlink FIFO Status Register
-
-#define FT1000_REG_MAG_DPDATA		0x0010  // Dual Port RAM Indirect Data Register
-
-#define FT1000_REG_MAG_DPDATAL		0x0010  // Dual Port RAM Indirect Data Register low-word
-
-#define FT1000_REG_MAG_DPDATAH		0x0012  // Dual Port RAM Indirect Data Register high-word
-
-#define	FT1000_REG_MAG_WATERMARK	0x002c	// Supv. Control Reg.			LLC register
-
-#define FT1000_REG_MAG_VERSION		0x0030	// LLC Version					LLC register
-
-
-
-// Common
-
-#define	FT1000_REG_DPRAM_ADDR	0x000E	// DPRAM ADDRESS when card in IO mode
-
-#define	FT1000_REG_SUP_CTRL		0x0020	// Supv. Control Reg.			LLC register
-
-#define	FT1000_REG_SUP_STAT		0x0022	// Supv. Status Reg				LLC register
-
-#define	FT1000_REG_RESET		0x0024	// Reset Reg					LLC register
-
-#define	FT1000_REG_SUP_ISR		0x0026	// Supv ISR						LLC register
-
-#define	FT1000_REG_SUP_IMASK	0x0028	// Supervisor Interrupt Mask	LLC register
-
-#define	FT1000_REG_DOORBELL		0x002a	// Door Bell Reg				LLC register
-
-#define FT1000_REG_ASIC_ID      0x002e  // ASIC Identification Number
-
-										// (Electrabuzz=0 Magnemite=TBD)
-
-
-
-// DSP doorbells
-
-#define FT1000_DB_DPRAM_RX		0x0001	// this value indicates that DSP has
-
-                                        //      data for host in DPRAM SlowQ
-
-#define FT1000_DB_DNLD_RX       0x0002  // Downloader handshake doorbell
-
-#define FT1000_ASIC_RESET_REQ   0x0004
-
-#define FT1000_DSP_ASIC_RESET   0x0008
-
-
-
-#define FT1000_DB_COND_RESET    0x0010
-
-
-
-// Host doorbells
-
-#define FT1000_DB_DPRAM_TX		0x0100	// this value indicates that host has
-
-                                        //      data for DSP in DPRAM.
-
-#define FT1000_DB_DNLD_TX       0x0200  // Downloader handshake doorbell
-
-#define FT1000_ASIC_RESET_DSP   0x0400
-
-#define FT1000_DB_HB            0x1000  // this value indicates that supervisor
-
-
-
-// Electrabuzz specific DPRAM mapping                                        //      has a heartbeat message for DSP.
-
-#define FT1000_DPRAM_BASE		0x1000	//  0x0000 to 0x07FF	DPRAM	2Kx16 - R/W from PCMCIA or DSP
-
-#define FT1000_DPRAM_TX_BASE	0x1002	//  TX AREA (SlowQ)
-
-#define FT1000_DPRAM_RX_BASE	0x1800	//  RX AREA (SlowQ)
-
-#define FT1000_DPRAM_SIZE       0x1000  //  4K bytes
-
-
-
-#define FT1000_DRV_DEBUG        0x17E0  // Debug area for driver
-
-#define FT1000_FIFO_LEN         0x17FC  // total length for DSP FIFO tracking
-
-#define FT1000_HI_HO            0x17FE  // heartbeat with HI/HO
-
-#define FT1000_DSP_STATUS       0x1FFE  // dsp status - non-zero is a request to reset dsp
-
-
-
-#define FT1000_DSP_CON_STATE    0x1FF8  // DSP Connection Status Info
-
-#define FT1000_DSP_LEDS         0x1FFA  // DSP LEDS for rcv pwr strength, Rx data, Tx data
-
-#define DSP_TIMESTAMP           0x1FFC  // dsp timestamp
-
-#define DSP_TIMESTAMP_DIFF      0x1FFA  // difference of dsp timestamp in DPRAM and Pseudo header.
-
-
-
-#define FT1000_DPRAM_FEFE    	0x1002	// Dsp Downloader handshake location
-
-
-
-#define FT1000_DSP_TIMER0       0x1FF0
-
-#define FT1000_DSP_TIMER1       0x1FF2
-
-#define FT1000_DSP_TIMER2       0x1FF4
-
-#define FT1000_DSP_TIMER3       0x1FF6
-
-
+/* Electrabuzz specific DPRAM mapping */
+/* this is used by ft1000_usb driver - isn't that a bug? */
+#undef FT1000_DPRAM_RX_BASE
+#define FT1000_DPRAM_RX_BASE	0x1800	/* RX AREA (SlowQ) */
 
 // MEMORY MAP FOR MAGNEMITE
-
-#define FT1000_DPRAM_MAG_TX_BASE	 	 0x0000	 //  TX AREA (SlowQ)
-
-#define FT1000_DPRAM_MAG_RX_BASE		 0x0200	 //  RX AREA (SlowQ)
-
-
-
-#define FT1000_MAG_FIFO_LEN              0x1FF   // total length for DSP FIFO tracking
-
-#define FT1000_MAG_FIFO_LEN_INDX         0x1     // low-word index
-
-#define FT1000_MAG_HI_HO                 0x1FF   // heartbeat with HI/HO
-
-#define FT1000_MAG_HI_HO_INDX            0x0     // high-word index
-
-#define FT1000_MAG_DSP_LEDS              0x3FE   // dsp led status for PAD device
-
-#define FT1000_MAG_DSP_LEDS_INDX         0x1     // dsp led status for PAD device
-
-
-
-#define FT1000_MAG_DSP_CON_STATE         0x3FE   // DSP Connection Status Info
-
-#define FT1000_MAG_DSP_CON_STATE_INDX    0x0     // DSP Connection Status Info
-
-
-
-#define FT1000_MAG_DPRAM_FEFE            0x000   // location for dsp ready indicator
-
-#define FT1000_MAG_DPRAM_FEFE_INDX       0x0     // location for dsp ready indicator
-
-
-
-#define FT1000_MAG_DSP_TIMER0            0x3FC
-
-#define FT1000_MAG_DSP_TIMER0_INDX       0x1
-
-
-
-#define FT1000_MAG_DSP_TIMER1            0x3FC
-
-#define FT1000_MAG_DSP_TIMER1_INDX       0x0
-
-
-
-#define FT1000_MAG_DSP_TIMER2            0x3FD
-
-#define FT1000_MAG_DSP_TIMER2_INDX       0x1
-
-
-
-#define FT1000_MAG_DSP_TIMER3            0x3FD
-
-#define FT1000_MAG_DSP_TIMER3_INDX       0x0
-
-
-
-#define FT1000_MAG_TOTAL_LEN             0x200
-
-#define FT1000_MAG_TOTAL_LEN_INDX        0x1
-
-
-
-#define FT1000_MAG_PH_LEN                0x200
-
-#define FT1000_MAG_PH_LEN_INDX           0x0
-
-
-
-#define FT1000_MAG_PORT_ID               0x201
-
-#define FT1000_MAG_PORT_ID_INDX          0x0
-
-
-
-//
-
-// Constants for the FT1000_REG_SUP_ISR
-
-//
-
-// Indicate the cause of an interrupt.
-
-//
-
-// SUPERVISOR ISR BIT MAPS
-
-
-
-#define ISR_EMPTY			(u8)0x00 	 // no bits set in ISR
-
-#define ISR_DOORBELL_ACK	(u8)0x01		 //  the doorbell i sent has been received.
-
-#define ISR_DOORBELL_PEND	(u8)0x02 	 //  doorbell for me
-
-#define ISR_RCV				(u8)0x04 	 // packet received with no errors
-
-#define ISR_WATERMARK		(u8)0x08 	 //
-
-
-
-// Interrupt mask register defines
-
-// note these are different from the ISR BIT MAPS.
-
-#define ISR_MASK_NONE			0x0000
-
-#define ISR_MASK_DOORBELL_ACK	0x0001
-
-#define ISR_MASK_DOORBELL_PEND	0x0002
-
-#define ISR_MASK_RCV			0x0004
-
-#define ISR_MASK_WATERMARK		0x0008 	  // Normally we will only mask the watermark interrupt when we want to enable interrupts.
-
-#define ISR_MASK_ALL			0xffff
-
-
-
-#define HOST_INTF_LE            0x0000    // Host interface little endian
-
-#define HOST_INTF_BE            0x0001    // Host interface big endian
-
-
-
-#define ISR_DEFAULT_MASK		0x7ff9
-
-
-
-#define hi                      0x6869
-
-#define ho                      0x686f
-
-
-
-#define FT1000_ASIC_RESET       0x80     // COR value for soft reset to PCMCIA core
-
-#define FT1000_ASIC_BITS        0x51     // Bits set in COR register under normal operation
-
-#define FT1000_ASIC_MAG_BITS    0x55     // Bits set in COR register under normal operation
-
-
-
-#define FT1000_COR_OFFSET       0x100
-
-
-
-#define ELECTRABUZZ_ID			0        // ASIC ID for ELECTRABUZZ
-
-#define MAGNEMITE_ID			0x1a01   // ASIC ID for MAGNEMITE
-
-
+/* the indexes are swapped comparing to PCMCIA - is it OK or a bug? */
+#undef FT1000_MAG_DSP_LED_INDX
+#define FT1000_MAG_DSP_LED_INDX		0x1	/* dsp led status for PAD device */
+#undef FT1000_MAG_DSP_CON_STATE_INDX
+#define FT1000_MAG_DSP_CON_STATE_INDX	0x0	/* DSP Connection Status Info */
 
 // Maximum times trying to get ASIC out of reset
-
 #define MAX_ASIC_RESET_CNT      20
 
-
-
-#define DSP_RESET_BIT           0x1
-
-#define ASIC_RESET_BIT          0x2
-
-#define DSP_UNENCRYPTED         0x4
-
-#define DSP_ENCRYPTED           0x8
-
-#define EFUSE_MEM_DISABLE       0x0040
-
-
 #define MAX_BUF_SIZE            4096
 
-struct drv_msg {
-	struct pseudo_hdr pseudo;
-	u16 type;
-	u16 length;
-	u8  data[0];
-} __attribute__ ((packed));
-
 struct ft1000_device
 {
 	struct usb_device *dev;