diff options
author | Alan Cox <alan@linux.intel.com> | 2009-10-06 15:47:55 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-12-11 12:23:06 -0800 |
commit | 5f1377d42bb89988fd9c86a92d1985320ff5053e (patch) | |
tree | 9b9ccc2cb61f4b2079d48151fbaae0ecd763a590 /drivers/staging/et131x | |
parent | abc449970a0016bf19e920c0666a89b2c7b57a24 (diff) | |
download | op-kernel-dev-5f1377d42bb89988fd9c86a92d1985320ff5053e.zip op-kernel-dev-5f1377d42bb89988fd9c86a92d1985320ff5053e.tar.gz |
Staging: et131x: PHY loopback cannot be set (and isn't useful for us anyway)
Remove the stuff that falls out from this always being zero.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/et131x')
-rw-r--r-- | drivers/staging/et131x/et1310_mac.c | 9 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_phy.c | 10 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_rx.c | 51 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_tx.c | 15 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_adapter.h | 2 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_initpci.c | 66 |
6 files changed, 56 insertions, 97 deletions
diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c index f81e1cb..35e1bcf 100644 --- a/drivers/staging/et131x/et1310_mac.c +++ b/drivers/staging/et131x/et1310_mac.c @@ -221,13 +221,8 @@ void ConfigMACRegs2(struct et131x_adapter *etdev) */ cfg2.bits.len_check = 0x1; - if (etdev->RegistryPhyLoopbk == false) { - cfg2.bits.pad_crc = 0x1; - cfg2.bits.crc_enable = 0x1; - } else { - cfg2.bits.pad_crc = 0; - cfg2.bits.crc_enable = 0; - } + cfg2.bits.pad_crc = 0x1; + cfg2.bits.crc_enable = 0x1; /* 1 - full duplex, 0 - half-duplex */ cfg2.bits.full_duplex = etdev->duplex_mode; diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index dd199bd..bdd1621 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -469,9 +469,7 @@ void et131x_Mii_check(struct et131x_adapter *etdev, spin_unlock_irqrestore(&etdev->Lock, flags); - /* Don't indicate state if we're in loopback mode */ - if (etdev->RegistryPhyLoopbk == false) - netif_carrier_on(etdev->netdev); + netif_carrier_on(etdev->netdev); } else { dev_warn(&etdev->pdev->dev, "Link down - cable problem ?\n"); @@ -504,11 +502,7 @@ void et131x_Mii_check(struct et131x_adapter *etdev, spin_unlock_irqrestore(&etdev->Lock, flags); - /* Only indicate state if we're in loopback - * mode - */ - if (etdev->RegistryPhyLoopbk == false) - netif_carrier_off(etdev->netdev); + netif_carrier_off(etdev->netdev); } etdev->linkspeed = 0; diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c index 10e21db..c0695b0 100644 --- a/drivers/staging/et131x/et1310_rx.c +++ b/drivers/staging/et131x/et1310_rx.c @@ -807,40 +807,35 @@ void et131x_rx_dma_disable(struct et131x_adapter *etdev) */ void et131x_rx_dma_enable(struct et131x_adapter *etdev) { - if (etdev->RegistryPhyLoopbk) - /* RxDMA is disabled for loopback operation. */ - writel(0x1, &etdev->regs->rxdma.csr.value); - else { /* Setup the receive dma configuration register for normal operation */ - RXDMA_CSR_t csr = { 0 }; - - csr.bits.fbr1_enable = 1; - if (etdev->RxRing.Fbr1BufferSize == 4096) - csr.bits.fbr1_size = 1; - else if (etdev->RxRing.Fbr1BufferSize == 8192) - csr.bits.fbr1_size = 2; - else if (etdev->RxRing.Fbr1BufferSize == 16384) - csr.bits.fbr1_size = 3; + RXDMA_CSR_t csr = { 0 }; + + csr.bits.fbr1_enable = 1; + if (etdev->RxRing.Fbr1BufferSize == 4096) + csr.bits.fbr1_size = 1; + else if (etdev->RxRing.Fbr1BufferSize == 8192) + csr.bits.fbr1_size = 2; + else if (etdev->RxRing.Fbr1BufferSize == 16384) + csr.bits.fbr1_size = 3; #ifdef USE_FBR0 - csr.bits.fbr0_enable = 1; - if (etdev->RxRing.Fbr0BufferSize == 256) - csr.bits.fbr0_size = 1; - else if (etdev->RxRing.Fbr0BufferSize == 512) - csr.bits.fbr0_size = 2; - else if (etdev->RxRing.Fbr0BufferSize == 1024) - csr.bits.fbr0_size = 3; + csr.bits.fbr0_enable = 1; + if (etdev->RxRing.Fbr0BufferSize == 256) + csr.bits.fbr0_size = 1; + else if (etdev->RxRing.Fbr0BufferSize == 512) + csr.bits.fbr0_size = 2; + else if (etdev->RxRing.Fbr0BufferSize == 1024) + csr.bits.fbr0_size = 3; #endif - writel(csr.value, &etdev->regs->rxdma.csr.value); + writel(csr.value, &etdev->regs->rxdma.csr.value); + csr.value = readl(&etdev->regs->rxdma.csr.value); + if (csr.bits.halt_status != 0) { + udelay(5); csr.value = readl(&etdev->regs->rxdma.csr.value); if (csr.bits.halt_status != 0) { - udelay(5); - csr.value = readl(&etdev->regs->rxdma.csr.value); - if (csr.bits.halt_status != 0) { - dev_err(&etdev->pdev->dev, - "RX Dma failed to exit halt state. CSR 0x%08x\n", - csr.value); - } + dev_err(&etdev->pdev->dev, + "RX Dma failed to exit halt state. CSR 0x%08x\n", + csr.value); } } } diff --git a/drivers/staging/et131x/et1310_tx.c b/drivers/staging/et131x/et1310_tx.c index b19d506..f4812a8 100644 --- a/drivers/staging/et131x/et1310_tx.c +++ b/drivers/staging/et131x/et1310_tx.c @@ -279,16 +279,11 @@ void et131x_tx_dma_disable(struct et131x_adapter *etdev) */ void et131x_tx_dma_enable(struct et131x_adapter *etdev) { - u32 csr = ET_TXDMA_SNGL_EPKT; - if (etdev->RegistryPhyLoopbk) - /* TxDMA is disabled for loopback operation. */ - csr |= ET_TXDMA_CSR_HALT; - else - /* Setup the transmit dma configuration register for normal - * operation - */ - csr |= PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT; - writel(csr, &etdev->regs->txdma.csr); + /* Setup the transmit dma configuration register for normal + * operation + */ + writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT), + &etdev->regs->txdma.csr); } /** diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h index bd53cb9..2a213ac 100644 --- a/drivers/staging/et131x/et131x_adapter.h +++ b/drivers/staging/et131x/et131x_adapter.h @@ -234,8 +234,6 @@ struct et131x_adapter { u32 RegistryRxMemEnd; /* Size of internal rx memory */ u32 RegistryJumboPacket; /* Max supported ethernet packet size */ - /* Validation helpers */ - u8 RegistryPhyLoopbk; /* Enable Phy loopback */ /* Derived from the registry: */ u8 AiForceDpx; /* duplex setting */ diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index db1ce58..b76fa73 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -329,52 +329,34 @@ void ConfigGlobalRegs(struct et131x_adapter *etdev) { struct _GLOBAL_t __iomem *regs = &etdev->regs->global; - if (etdev->RegistryPhyLoopbk == false) { - if (etdev->RegistryJumboPacket < 2048) { - /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word - * block of RAM that the driver can split between Tx - * and Rx as it desires. Our default is to split it - * 50/50: - */ - writel(0, ®s->rxq_start_addr); - writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr); - writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); - } else if (etdev->RegistryJumboPacket < 8192) { - /* For jumbo packets > 2k but < 8k, split 50-50. */ - writel(0, ®s->rxq_start_addr); - writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr); - writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); - } else { - /* 9216 is the only packet size greater than 8k that - * is available. The Tx buffer has to be big enough - * for one whole packet on the Tx side. We'll make - * the Tx 9408, and give the rest to Rx - */ - writel(0x0000, ®s->rxq_start_addr); - writel(0x01b3, ®s->rxq_end_addr); - writel(0x01b4, ®s->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1,®s->txq_end_addr); - } - - /* Initialize the loopback register. Disable all loopbacks. */ - writel(0, ®s->loopback); + writel(0, ®s->rxq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); + + if (etdev->RegistryJumboPacket < 2048) { + /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word + * block of RAM that the driver can split between Tx + * and Rx as it desires. Our default is to split it + * 50/50: + */ + writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr); + writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr); + } else if (etdev->RegistryJumboPacket < 8192) { + /* For jumbo packets > 2k but < 8k, split 50-50. */ + writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr); + writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr); } else { - /* For PHY Line loopback, the memory is configured as if Tx - * and Rx both have all the memory. This is because the - * RxMAC will write data into the space, and the TxMAC will - * read it out. + /* 9216 is the only packet size greater than 8k that + * is available. The Tx buffer has to be big enough + * for one whole packet on the Tx side. We'll make + * the Tx 9408, and give the rest to Rx */ - writel(0, ®s->rxq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, ®s->rxq_end_addr); - writel(0, ®s->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); - - /* Initialize the loopback register (MAC loopback). */ - writel(ET_LOOP_MAC, ®s->loopback); + writel(0x01b3, ®s->rxq_end_addr); + writel(0x01b4, ®s->txq_start_addr); } + /* Initialize the loopback register. Disable all loopbacks. */ + writel(0, ®s->loopback); + /* MSI Register */ writel(0, ®s->msi_config); |