Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...

1 files changed, 301 insertions, 346 deletions

diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c
index 46c050c..aedca66 100644
--- a/drivers/staging/dgnc/dgnc_cls.c
+++ b/drivers/staging/dgnc/dgnc_cls.c
@@ -26,56 +26,6 @@
 #include "dgnc_cls.h"
 #include "dgnc_tty.h"
 
-static inline void cls_parse_isr(struct dgnc_board *brd, uint port);
-static inline void cls_clear_break(struct channel_t *ch, int force);
-static inline void cls_set_cts_flow_control(struct channel_t *ch);
-static inline void cls_set_rts_flow_control(struct channel_t *ch);
-static inline void cls_set_ixon_flow_control(struct channel_t *ch);
-static inline void cls_set_ixoff_flow_control(struct channel_t *ch);
-static inline void cls_set_no_output_flow_control(struct channel_t *ch);
-static inline void cls_set_no_input_flow_control(struct channel_t *ch);
-static void cls_parse_modem(struct channel_t *ch, unsigned char signals);
-static void cls_tasklet(unsigned long data);
-static void cls_vpd(struct dgnc_board *brd);
-static void cls_uart_init(struct channel_t *ch);
-static void cls_uart_off(struct channel_t *ch);
-static int cls_drain(struct tty_struct *tty, uint seconds);
-static void cls_param(struct tty_struct *tty);
-static void cls_assert_modem_signals(struct channel_t *ch);
-static void cls_flush_uart_write(struct channel_t *ch);
-static void cls_flush_uart_read(struct channel_t *ch);
-static void cls_disable_receiver(struct channel_t *ch);
-static void cls_enable_receiver(struct channel_t *ch);
-static void cls_send_break(struct channel_t *ch, int msecs);
-static void cls_send_start_character(struct channel_t *ch);
-static void cls_send_stop_character(struct channel_t *ch);
-static void cls_copy_data_from_uart_to_queue(struct channel_t *ch);
-static void cls_copy_data_from_queue_to_uart(struct channel_t *ch);
-static uint cls_get_uart_bytes_left(struct channel_t *ch);
-static void cls_send_immediate_char(struct channel_t *ch, unsigned char);
-static irqreturn_t cls_intr(int irq, void *voidbrd);
-
-struct board_ops dgnc_cls_ops = {
-	.tasklet =			cls_tasklet,
-	.intr =				cls_intr,
-	.uart_init =			cls_uart_init,
-	.uart_off =			cls_uart_off,
-	.drain =			cls_drain,
-	.param =			cls_param,
-	.vpd =				cls_vpd,
-	.assert_modem_signals =		cls_assert_modem_signals,
-	.flush_uart_write =		cls_flush_uart_write,
-	.flush_uart_read =		cls_flush_uart_read,
-	.disable_receiver =		cls_disable_receiver,
-	.enable_receiver =		cls_enable_receiver,
-	.send_break =			cls_send_break,
-	.send_start_character =		cls_send_start_character,
-	.send_stop_character =		cls_send_stop_character,
-	.copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart,
-	.get_uart_bytes_left =		cls_get_uart_bytes_left,
-	.send_immediate_char =		cls_send_immediate_char
-};
-
 static inline void cls_set_cts_flow_control(struct channel_t *ch)
 {
 	unsigned char lcrb = readb(&ch->ch_cls_uart->lcr);
@@ -357,6 +307,253 @@ static inline void cls_clear_break(struct channel_t *ch, int force)
 	spin_unlock_irqrestore(&ch->ch_lock, flags);
 }
 
+static void cls_copy_data_from_uart_to_queue(struct channel_t *ch)
+{
+	int qleft = 0;
+	unsigned char linestatus = 0;
+	unsigned char error_mask = 0;
+	ushort head;
+	ushort tail;
+	unsigned long flags;
+
+	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
+		return;
+
+	spin_lock_irqsave(&ch->ch_lock, flags);
+
+	/* cache head and tail of queue */
+	head = ch->ch_r_head;
+	tail = ch->ch_r_tail;
+
+	/* Store how much space we have left in the queue */
+	qleft = tail - head - 1;
+	if (qleft < 0)
+		qleft += RQUEUEMASK + 1;
+
+	/*
+	 * Create a mask to determine whether we should
+	 * insert the character (if any) into our queue.
+	 */
+	if (ch->ch_c_iflag & IGNBRK)
+		error_mask |= UART_LSR_BI;
+
+	while (1) {
+		linestatus = readb(&ch->ch_cls_uart->lsr);
+
+		if (!(linestatus & (UART_LSR_DR)))
+			break;
+
+		/*
+		 * Discard character if we are ignoring the error mask.
+		 */
+		if (linestatus & error_mask)  {
+			linestatus = 0;
+			readb(&ch->ch_cls_uart->txrx);
+			continue;
+		}
+
+		/*
+		 * If our queue is full, we have no choice but to drop some
+		 * data. The assumption is that HWFLOW or SWFLOW should have
+		 * stopped things way way before we got to this point.
+		 *
+		 * I decided that I wanted to ditch the oldest data first,
+		 * I hope thats okay with everyone? Yes? Good.
+		 */
+		while (qleft < 1) {
+			tail = (tail + 1) & RQUEUEMASK;
+			ch->ch_r_tail = tail;
+			ch->ch_err_overrun++;
+			qleft++;
+		}
+
+		ch->ch_equeue[head] = linestatus & (UART_LSR_BI | UART_LSR_PE
+								 | UART_LSR_FE);
+		ch->ch_rqueue[head] = readb(&ch->ch_cls_uart->txrx);
+
+		qleft--;
+
+		if (ch->ch_equeue[head] & UART_LSR_PE)
+			ch->ch_err_parity++;
+		if (ch->ch_equeue[head] & UART_LSR_BI)
+			ch->ch_err_break++;
+		if (ch->ch_equeue[head] & UART_LSR_FE)
+			ch->ch_err_frame++;
+
+		/* Add to, and flip head if needed */
+		head = (head + 1) & RQUEUEMASK;
+		ch->ch_rxcount++;
+	}
+
+	/*
+	 * Write new final heads to channel structure.
+	 */
+	ch->ch_r_head = head & RQUEUEMASK;
+	ch->ch_e_head = head & EQUEUEMASK;
+
+	spin_unlock_irqrestore(&ch->ch_lock, flags);
+}
+
+/* Make the UART raise any of the output signals we want up */
+static void cls_assert_modem_signals(struct channel_t *ch)
+{
+	unsigned char out;
+
+	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
+		return;
+
+	out = ch->ch_mostat;
+
+	if (ch->ch_flags & CH_LOOPBACK)
+		out |= UART_MCR_LOOP;
+
+	writeb(out, &ch->ch_cls_uart->mcr);
+
+	/* Give time for the UART to actually drop the signals */
+	udelay(10);
+}
+
+static void cls_copy_data_from_queue_to_uart(struct channel_t *ch)
+{
+	ushort head;
+	ushort tail;
+	int n;
+	int qlen;
+	uint len_written = 0;
+	unsigned long flags;
+
+	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
+		return;
+
+	spin_lock_irqsave(&ch->ch_lock, flags);
+
+	/* No data to write to the UART */
+	if (ch->ch_w_tail == ch->ch_w_head)
+		goto exit_unlock;
+
+	/* If port is "stopped", don't send any data to the UART */
+	if ((ch->ch_flags & CH_FORCED_STOP) ||
+	    (ch->ch_flags & CH_BREAK_SENDING))
+		goto exit_unlock;
+
+	if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM)))
+		goto exit_unlock;
+
+	n = 32;
+
+	/* cache head and tail of queue */
+	head = ch->ch_w_head & WQUEUEMASK;
+	tail = ch->ch_w_tail & WQUEUEMASK;
+	qlen = (head - tail) & WQUEUEMASK;
+
+	/* Find minimum of the FIFO space, versus queue length */
+	n = min(n, qlen);
+
+	while (n > 0) {
+		/*
+		 * If RTS Toggle mode is on, turn on RTS now if not already set,
+		 * and make sure we get an event when the data transfer has
+		 * completed.
+		 */
+		if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
+			if (!(ch->ch_mostat & UART_MCR_RTS)) {
+				ch->ch_mostat |= (UART_MCR_RTS);
+				cls_assert_modem_signals(ch);
+			}
+			ch->ch_tun.un_flags |= (UN_EMPTY);
+		}
+
+		/*
+		 * If DTR Toggle mode is on, turn on DTR now if not already set,
+		 * and make sure we get an event when the data transfer has
+		 * completed.
+		 */
+		if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
+			if (!(ch->ch_mostat & UART_MCR_DTR)) {
+				ch->ch_mostat |= (UART_MCR_DTR);
+				cls_assert_modem_signals(ch);
+			}
+			ch->ch_tun.un_flags |= (UN_EMPTY);
+		}
+		writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_cls_uart->txrx);
+		ch->ch_w_tail++;
+		ch->ch_w_tail &= WQUEUEMASK;
+		ch->ch_txcount++;
+		len_written++;
+		n--;
+	}
+
+	if (len_written > 0)
+		ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+
+exit_unlock:
+	spin_unlock_irqrestore(&ch->ch_lock, flags);
+}
+
+static void cls_parse_modem(struct channel_t *ch, unsigned char signals)
+{
+	unsigned char msignals = signals;
+	unsigned long flags;
+
+	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
+		return;
+
+	/*
+	 * Do altpin switching. Altpin switches DCD and DSR.
+	 * This prolly breaks DSRPACE, so we should be more clever here.
+	 */
+	spin_lock_irqsave(&ch->ch_lock, flags);
+	if (ch->ch_digi.digi_flags & DIGI_ALTPIN) {
+		unsigned char mswap = signals;
+
+		if (mswap & UART_MSR_DDCD) {
+			msignals &= ~UART_MSR_DDCD;
+			msignals |= UART_MSR_DDSR;
+		}
+		if (mswap & UART_MSR_DDSR) {
+			msignals &= ~UART_MSR_DDSR;
+			msignals |= UART_MSR_DDCD;
+		}
+		if (mswap & UART_MSR_DCD) {
+			msignals &= ~UART_MSR_DCD;
+			msignals |= UART_MSR_DSR;
+		}
+		if (mswap & UART_MSR_DSR) {
+			msignals &= ~UART_MSR_DSR;
+			msignals |= UART_MSR_DCD;
+		}
+	}
+	spin_unlock_irqrestore(&ch->ch_lock, flags);
+
+	/*
+	 * Scrub off lower bits. They signify delta's, which I don't
+	 * care about
+	 */
+	signals &= 0xf0;
+
+	spin_lock_irqsave(&ch->ch_lock, flags);
+	if (msignals & UART_MSR_DCD)
+		ch->ch_mistat |= UART_MSR_DCD;
+	else
+		ch->ch_mistat &= ~UART_MSR_DCD;
+
+	if (msignals & UART_MSR_DSR)
+		ch->ch_mistat |= UART_MSR_DSR;
+	else
+		ch->ch_mistat &= ~UART_MSR_DSR;
+
+	if (msignals & UART_MSR_RI)
+		ch->ch_mistat |= UART_MSR_RI;
+	else
+		ch->ch_mistat &= ~UART_MSR_RI;
+
+	if (msignals & UART_MSR_CTS)
+		ch->ch_mistat |= UART_MSR_CTS;
+	else
+		ch->ch_mistat &= ~UART_MSR_CTS;
+	spin_unlock_irqrestore(&ch->ch_lock, flags);
+}
+
 /* Parse the ISR register for the specific port */
 static inline void cls_parse_isr(struct dgnc_board *brd, uint port)
 {
@@ -387,8 +584,6 @@ static inline void cls_parse_isr(struct dgnc_board *brd, uint port)
 		/* Receive Interrupt pending */
 		if (isr & (UART_IIR_RDI | UART_IIR_RDI_TIMEOUT)) {
 			/* Read data from uart -> queue */
-			brd->intr_rx++;
-			ch->ch_intr_rx++;
 			cls_copy_data_from_uart_to_queue(ch);
 			dgnc_check_queue_flow_control(ch);
 		}
@@ -398,27 +593,48 @@ static inline void cls_parse_isr(struct dgnc_board *brd, uint port)
 			/* Transfer data (if any) from Write Queue -> UART. */
 			spin_lock_irqsave(&ch->ch_lock, flags);
 			ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
-			brd->intr_tx++;
-			ch->ch_intr_tx++;
 			spin_unlock_irqrestore(&ch->ch_lock, flags);
 			cls_copy_data_from_queue_to_uart(ch);
 		}
 
-		/* CTS/RTS change of state */
-		if (isr & UART_IIR_CTSRTS) {
-			brd->intr_modem++;
-			ch->ch_intr_modem++;
-			/*
-			 * Don't need to do anything, the cls_parse_modem
-			 * below will grab the updated modem signals.
-			 */
-		}
-
 		/* Parse any modem signal changes */
 		cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr));
 	}
 }
 
+/* Channel lock MUST be held before calling this function! */
+static void cls_flush_uart_write(struct channel_t *ch)
+{
+	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
+		return;
+
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
+	       &ch->ch_cls_uart->isr_fcr);
+	usleep_range(10, 20);
+
+	ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+}
+
+/* Channel lock MUST be held before calling this function! */
+static void cls_flush_uart_read(struct channel_t *ch)
+{
+	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
+		return;
+
+	/*
+	 * For complete POSIX compatibility, we should be purging the
+	 * read FIFO in the UART here.
+	 *
+	 * However, clearing the read FIFO (UART_FCR_CLEAR_RCVR) also
+	 * incorrectly flushes write data as well as just basically trashing the
+	 * FIFO.
+	 *
+	 * Presumably, this is a bug in this UART.
+	 */
+
+	udelay(10);
+}
+
 /*
  * cls_param()
  * Send any/all changes to the line to the UART.
@@ -760,8 +976,6 @@ static irqreturn_t cls_intr(int irq, void *voidbrd)
 
 	spin_lock_irqsave(&brd->bd_intr_lock, flags);
 
-	brd->intr_count++;
-
 	/*
 	 * Check the board's global interrupt offset to see if we
 	 * we actually do have an interrupt pending for us.
@@ -804,93 +1018,6 @@ static void cls_enable_receiver(struct channel_t *ch)
 	writeb(tmp, &ch->ch_cls_uart->ier);
 }
 
-static void cls_copy_data_from_uart_to_queue(struct channel_t *ch)
-{
-	int qleft = 0;
-	unsigned char linestatus = 0;
-	unsigned char error_mask = 0;
-	ushort head;
-	ushort tail;
-	unsigned long flags;
-
-	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return;
-
-	spin_lock_irqsave(&ch->ch_lock, flags);
-
-	/* cache head and tail of queue */
-	head = ch->ch_r_head;
-	tail = ch->ch_r_tail;
-
-	/* Store how much space we have left in the queue */
-	qleft = tail - head - 1;
-	if (qleft < 0)
-		qleft += RQUEUEMASK + 1;
-
-	/*
-	 * Create a mask to determine whether we should
-	 * insert the character (if any) into our queue.
-	 */
-	if (ch->ch_c_iflag & IGNBRK)
-		error_mask |= UART_LSR_BI;
-
-	while (1) {
-		linestatus = readb(&ch->ch_cls_uart->lsr);
-
-		if (!(linestatus & (UART_LSR_DR)))
-			break;
-
-		/*
-		 * Discard character if we are ignoring the error mask.
-		*/
-		if (linestatus & error_mask)  {
-			linestatus = 0;
-			readb(&ch->ch_cls_uart->txrx);
-			continue;
-		}
-
-		/*
-		 * If our queue is full, we have no choice but to drop some
-		 * data. The assumption is that HWFLOW or SWFLOW should have
-		 * stopped things way way before we got to this point.
-		 *
-		 * I decided that I wanted to ditch the oldest data first,
-		 * I hope thats okay with everyone? Yes? Good.
-		 */
-		while (qleft < 1) {
-			tail = (tail + 1) & RQUEUEMASK;
-			ch->ch_r_tail = tail;
-			ch->ch_err_overrun++;
-			qleft++;
-		}
-
-		ch->ch_equeue[head] = linestatus & (UART_LSR_BI | UART_LSR_PE
-								 | UART_LSR_FE);
-		ch->ch_rqueue[head] = readb(&ch->ch_cls_uart->txrx);
-
-		qleft--;
-
-		if (ch->ch_equeue[head] & UART_LSR_PE)
-			ch->ch_err_parity++;
-		if (ch->ch_equeue[head] & UART_LSR_BI)
-			ch->ch_err_break++;
-		if (ch->ch_equeue[head] & UART_LSR_FE)
-			ch->ch_err_frame++;
-
-		/* Add to, and flip head if needed */
-		head = (head + 1) & RQUEUEMASK;
-		ch->ch_rxcount++;
-	}
-
-	/*
-	 * Write new final heads to channel structure.
-	 */
-	ch->ch_r_head = head & RQUEUEMASK;
-	ch->ch_e_head = head & EQUEUEMASK;
-
-	spin_unlock_irqrestore(&ch->ch_lock, flags);
-}
-
 /*
  * This function basically goes to sleep for secs, or until
  * it gets signalled that the port has fully drained.
@@ -926,199 +1053,6 @@ static int cls_drain(struct tty_struct *tty, uint seconds)
 					 ((un->un_flags & UN_EMPTY) == 0));
 }
 
-/* Channel lock MUST be held before calling this function! */
-static void cls_flush_uart_write(struct channel_t *ch)
-{
-	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return;
-
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
-	       &ch->ch_cls_uart->isr_fcr);
-	usleep_range(10, 20);
-
-	ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
-}
-
-/* Channel lock MUST be held before calling this function! */
-static void cls_flush_uart_read(struct channel_t *ch)
-{
-	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return;
-
-	/*
-	 * For complete POSIX compatibility, we should be purging the
-	 * read FIFO in the UART here.
-	 *
-	 * However, clearing the read FIFO (UART_FCR_CLEAR_RCVR) also
-	 * incorrectly flushes write data as well as just basically trashing the
-	 * FIFO.
-	 *
-	 * Presumably, this is a bug in this UART.
-	 */
-
-	udelay(10);
-}
-
-static void cls_copy_data_from_queue_to_uart(struct channel_t *ch)
-{
-	ushort head;
-	ushort tail;
-	int n;
-	int qlen;
-	uint len_written = 0;
-	unsigned long flags;
-
-	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return;
-
-	spin_lock_irqsave(&ch->ch_lock, flags);
-
-	/* No data to write to the UART */
-	if (ch->ch_w_tail == ch->ch_w_head)
-		goto exit_unlock;
-
-	/* If port is "stopped", don't send any data to the UART */
-	if ((ch->ch_flags & CH_FORCED_STOP) ||
-	    (ch->ch_flags & CH_BREAK_SENDING))
-		goto exit_unlock;
-
-	if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM)))
-		goto exit_unlock;
-
-	n = 32;
-
-	/* cache head and tail of queue */
-	head = ch->ch_w_head & WQUEUEMASK;
-	tail = ch->ch_w_tail & WQUEUEMASK;
-	qlen = (head - tail) & WQUEUEMASK;
-
-	/* Find minimum of the FIFO space, versus queue length */
-	n = min(n, qlen);
-
-	while (n > 0) {
-		/*
-		 * If RTS Toggle mode is on, turn on RTS now if not already set,
-		 * and make sure we get an event when the data transfer has
-		 * completed.
-		 */
-		if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
-			if (!(ch->ch_mostat & UART_MCR_RTS)) {
-				ch->ch_mostat |= (UART_MCR_RTS);
-				cls_assert_modem_signals(ch);
-			}
-			ch->ch_tun.un_flags |= (UN_EMPTY);
-		}
-
-		/*
-		 * If DTR Toggle mode is on, turn on DTR now if not already set,
-		 * and make sure we get an event when the data transfer has
-		 * completed.
-		 */
-		if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
-			if (!(ch->ch_mostat & UART_MCR_DTR)) {
-				ch->ch_mostat |= (UART_MCR_DTR);
-				cls_assert_modem_signals(ch);
-			}
-			ch->ch_tun.un_flags |= (UN_EMPTY);
-		}
-		writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_cls_uart->txrx);
-		ch->ch_w_tail++;
-		ch->ch_w_tail &= WQUEUEMASK;
-		ch->ch_txcount++;
-		len_written++;
-		n--;
-	}
-
-	if (len_written > 0)
-		ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
-
-exit_unlock:
-	spin_unlock_irqrestore(&ch->ch_lock, flags);
-}
-
-static void cls_parse_modem(struct channel_t *ch, unsigned char signals)
-{
-	unsigned char msignals = signals;
-	unsigned long flags;
-
-	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return;
-
-	/*
-	 * Do altpin switching. Altpin switches DCD and DSR.
-	 * This prolly breaks DSRPACE, so we should be more clever here.
-	 */
-	spin_lock_irqsave(&ch->ch_lock, flags);
-	if (ch->ch_digi.digi_flags & DIGI_ALTPIN) {
-		unsigned char mswap = signals;
-
-		if (mswap & UART_MSR_DDCD) {
-			msignals &= ~UART_MSR_DDCD;
-			msignals |= UART_MSR_DDSR;
-		}
-		if (mswap & UART_MSR_DDSR) {
-			msignals &= ~UART_MSR_DDSR;
-			msignals |= UART_MSR_DDCD;
-		}
-		if (mswap & UART_MSR_DCD) {
-			msignals &= ~UART_MSR_DCD;
-			msignals |= UART_MSR_DSR;
-		}
-		if (mswap & UART_MSR_DSR) {
-			msignals &= ~UART_MSR_DSR;
-			msignals |= UART_MSR_DCD;
-		}
-	}
-	spin_unlock_irqrestore(&ch->ch_lock, flags);
-
-	/*
-	 * Scrub off lower bits. They signify delta's, which I don't
-	 * care about
-	 */
-	signals &= 0xf0;
-
-	spin_lock_irqsave(&ch->ch_lock, flags);
-	if (msignals & UART_MSR_DCD)
-		ch->ch_mistat |= UART_MSR_DCD;
-	else
-		ch->ch_mistat &= ~UART_MSR_DCD;
-
-	if (msignals & UART_MSR_DSR)
-		ch->ch_mistat |= UART_MSR_DSR;
-	else
-		ch->ch_mistat &= ~UART_MSR_DSR;
-
-	if (msignals & UART_MSR_RI)
-		ch->ch_mistat |= UART_MSR_RI;
-	else
-		ch->ch_mistat &= ~UART_MSR_RI;
-
-	if (msignals & UART_MSR_CTS)
-		ch->ch_mistat |= UART_MSR_CTS;
-	else
-		ch->ch_mistat &= ~UART_MSR_CTS;
-	spin_unlock_irqrestore(&ch->ch_lock, flags);
-}
-
-/* Make the UART raise any of the output signals we want up */
-static void cls_assert_modem_signals(struct channel_t *ch)
-{
-	unsigned char out;
-
-	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
-		return;
-
-	out = ch->ch_mostat;
-
-	if (ch->ch_flags & CH_LOOPBACK)
-		out |= UART_MCR_LOOP;
-
-	writeb(out, &ch->ch_cls_uart->mcr);
-
-	/* Give time for the UART to actually drop the signals */
-	udelay(10);
-}
-
 static void cls_send_start_character(struct channel_t *ch)
 {
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
@@ -1298,3 +1232,24 @@ static void cls_vpd(struct dgnc_board *brd)
 
 	iounmap(re_map_vpdbase);
 }
+
+struct board_ops dgnc_cls_ops = {
+	.tasklet =			cls_tasklet,
+	.intr =				cls_intr,
+	.uart_init =			cls_uart_init,
+	.uart_off =			cls_uart_off,
+	.drain =			cls_drain,
+	.param =			cls_param,
+	.vpd =				cls_vpd,
+	.assert_modem_signals =		cls_assert_modem_signals,
+	.flush_uart_write =		cls_flush_uart_write,
+	.flush_uart_read =		cls_flush_uart_read,
+	.disable_receiver =		cls_disable_receiver,
+	.enable_receiver =		cls_enable_receiver,
+	.send_break =			cls_send_break,
+	.send_start_character =		cls_send_start_character,
+	.send_stop_character =		cls_send_stop_character,
+	.copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart,
+	.get_uart_bytes_left =		cls_get_uart_bytes_left,
+	.send_immediate_char =		cls_send_immediate_char
+};