staging: cxt1e1: Fix line over 80 characters.

Fix checkpatch.pl issues with line over 80
characters in comet.c

Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 24 insertions, 11 deletions

diff --git a/drivers/staging/cxt1e1/comet.c b/drivers/staging/cxt1e1/comet.c
index 953d96a..c27ac09 100644
--- a/drivers/staging/cxt1e1/comet.c
+++ b/drivers/staging/cxt1e1/comet.c
@@ -29,8 +29,11 @@ extern int  cxt1e1_log_level;
 
 /* forward references */
 static void SetPwrLevel(struct s_comet_reg *comet);
-static void WrtRcvEqualizerTbl(ci_t *ci, struct s_comet_reg *comet, u_int32_t *table);
-static void WrtXmtWaveformTbl(ci_t *ci, struct s_comet_reg *comet, u_int8_t table[COMET_NUM_SAMPLES][COMET_NUM_UNITS]);
+static void WrtRcvEqualizerTbl(ci_t *ci, struct s_comet_reg *comet,
+				u_int32_t *table);
+static void WrtXmtWaveformTbl(ci_t *ci, struct s_comet_reg *comet,
+				u_int8_t table[COMET_NUM_SAMPLES]
+				[COMET_NUM_UNITS]);
 
 
 static void *TWV_table[12] = {
@@ -50,6 +53,7 @@ lbo_tbl_lkup(int t1, int lbo) {
 		if (t1)
 			/* default T1 waveform table */
 			lbo = CFG_LBO_LH0;
+
 		else
 			/* default E1 waveform table */
 			lbo = CFG_LBO_E120;
@@ -58,8 +62,8 @@ lbo_tbl_lkup(int t1, int lbo) {
 	return lbo - 1;
 }
 
-void init_comet(void *ci, struct s_comet_reg *comet, u_int32_t port_mode, int clockmaster,
-		u_int8_t moreParams)
+void init_comet(void *ci, struct s_comet_reg *comet, u_int32_t port_mode,
+		int clockmaster, u_int8_t moreParams)
 {
 	u_int8_t isT1mode;
 	/* T1 default */
@@ -146,7 +150,9 @@ void init_comet(void *ci, struct s_comet_reg *comet, u_int32_t port_mode, int cl
 	 /* t1RBOC enable(BOC:BitOriented Code) */
 	pci_write_32((u_int32_t *) &comet->t1_rboc_ena, 0x00);
 	if (isT1mode) {
-		/* IBCD cfg: aka Inband Code Detection ** loopback code length set to */
+		/* IBCD cfg: aka Inband Code Detection ** loopback code length
+		 * set to
+		 */
 		/* 6 bit down, 5 bit up (assert) */
 		pci_write_32((u_int32_t *) &comet->ibcd_cfg, 0x04);
 		/* line loopback activate pattern */
@@ -286,7 +292,9 @@ void init_comet(void *ci, struct s_comet_reg *comet, u_int32_t port_mode, int cl
     /* 0x30: "BRIF cfg"; 0x20 is 'CMODE', 0x03 is (bit) rate */
     /* note "rate bits can only be set once after reset" */
 	if (clockmaster) {
-		/* CMODE == clockMode, 0=clock master (so all 3 others should be slave) */
+		/* CMODE == clockMode, 0=clock master
+		 * (so all 3 others should be slave)
+		 */
 		/* rate = 1.544 Mb/s */
 		if (isT1mode)
 			/* Comet 0 Master Mode(CMODE=0) */
@@ -398,7 +406,8 @@ void init_comet(void *ci, struct s_comet_reg *comet, u_int32_t port_mode, int cl
 ** Returns:     Nothing
 */
 static void
-WrtXmtWaveform(ci_t *ci, struct s_comet_reg *comet, u_int32_t sample, u_int32_t unit, u_int8_t data)
+WrtXmtWaveform(ci_t *ci, struct s_comet_reg *comet, u_int32_t sample,
+		u_int32_t unit, u_int8_t data)
 {
 	u_int8_t    WaveformAddr;
 
@@ -561,13 +570,17 @@ SetCometOps(struct s_comet_reg *comet)
 
 	if (comet == mConfig.C4Func1Base + (COMET0_OFFSET >> 2)) {
 		/* read the BRIF Configuration */
-		rd_value = (u_int8_t) pci_read_32((u_int32_t *) &comet->brif_cfg);
+		rd_value = (u_int8_t) pci_read_32((u_int32_t *)
+				&comet->brif_cfg);
 		rd_value &= ~0x20;
-		pci_write_32((u_int32_t *) &comet->brif_cfg, (u_int32_t) rd_value);
+		pci_write_32((u_int32_t *) &comet->brif_cfg,
+				(u_int32_t) rd_value);
 		/* read the BRIF Frame Pulse Configuration */
-		rd_value = (u_int8_t) pci_read_32((u_int32_t *) &comet->brif_fpcfg);
+		rd_value = (u_int8_t) pci_read_32((u_int32_t *)
+				&comet->brif_fpcfg);
 		rd_value &= ~0x20;
-		pci_write_32((u_int32_t *) &comet->brif_fpcfg, (u_int8_t) rd_value);
+		pci_write_32((u_int32_t *) &comet->brif_fpcfg,
+				(u_int8_t) rd_value);
 	} else {
 	/* read the BRIF Configuration */
 	rd_value = (u_int8_t) pci_read_32((u_int32_t *) &comet->brif_cfg);