staging: brcm80211: cleanup on the brcm80211 include directory

moved several files to specific source directory as these do not
need to be shared between drivers. Also removed some unused include
files from the include directory.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 217 deletions

diff --git a/drivers/staging/brcm80211/include/sbpcmcia.h b/drivers/staging/brcm80211/include/sbpcmcia.h
deleted file mode 100644
index 6b9923f5..0000000
--- a/drivers/staging/brcm80211/include/sbpcmcia.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef	_SBPCMCIA_H
-#define	_SBPCMCIA_H
-
-/* All the addresses that are offsets in attribute space are divided
- * by two to account for the fact that odd bytes are invalid in
- * attribute space and our read/write routines make the space appear
- * as if they didn't exist. Still we want to show the original numbers
- * as documented in the hnd_pcmcia core manual.
- */
-
-/* PCMCIA Function Configuration Registers */
-#define	PCMCIA_FCR		(0x700 / 2)
-
-#define	FCR0_OFF		0
-#define	FCR1_OFF		(0x40 / 2)
-#define	FCR2_OFF		(0x80 / 2)
-#define	FCR3_OFF		(0xc0 / 2)
-
-#define	PCMCIA_FCR0		(0x700 / 2)
-#define	PCMCIA_FCR1		(0x740 / 2)
-#define	PCMCIA_FCR2		(0x780 / 2)
-#define	PCMCIA_FCR3		(0x7c0 / 2)
-
-/* Standard PCMCIA FCR registers */
-
-#define	PCMCIA_COR		0
-
-#define	COR_RST			0x80
-#define	COR_LEV			0x40
-#define	COR_IRQEN		0x04
-#define	COR_BLREN		0x01
-#define	COR_FUNEN		0x01
-
-#define	PCICIA_FCSR		(2 / 2)
-#define	PCICIA_PRR		(4 / 2)
-#define	PCICIA_SCR		(6 / 2)
-#define	PCICIA_ESR		(8 / 2)
-
-#define PCM_MEMOFF		0x0000
-#define F0_MEMOFF		0x1000
-#define F1_MEMOFF		0x2000
-#define F2_MEMOFF		0x3000
-#define F3_MEMOFF		0x4000
-
-/* Memory base in the function fcr's */
-#define MEM_ADDR0		(0x728 / 2)
-#define MEM_ADDR1		(0x72a / 2)
-#define MEM_ADDR2		(0x72c / 2)
-
-/* PCMCIA base plus Srom access in fcr0: */
-#define PCMCIA_ADDR0		(0x072e / 2)
-#define PCMCIA_ADDR1		(0x0730 / 2)
-#define PCMCIA_ADDR2		(0x0732 / 2)
-
-#define MEM_SEG			(0x0734 / 2)
-#define SROM_CS			(0x0736 / 2)
-#define SROM_DATAL		(0x0738 / 2)
-#define SROM_DATAH		(0x073a / 2)
-#define SROM_ADDRL		(0x073c / 2)
-#define SROM_ADDRH		(0x073e / 2)
-#define	SROM_INFO2		(0x0772 / 2)	/* Corerev >= 2 && <= 5 */
-#define	SROM_INFO		(0x07be / 2)	/* Corerev >= 6 */
-
-/*  Values for srom_cs: */
-#define SROM_IDLE		0
-#define SROM_WRITE		1
-#define SROM_READ		2
-#define SROM_WEN		4
-#define SROM_WDS		7
-#define SROM_DONE		8
-
-/* Fields in srom_info: */
-#define	SRI_SZ_MASK		0x03
-#define	SRI_BLANK		0x04
-#define	SRI_OTP			0x80
-
-#if !defined(ESTA_POSTMOGRIFY_REMOVAL)
-/* CIS stuff */
-
-/* The CIS stops where the FCRs start */
-#define	CIS_SIZE		PCMCIA_FCR
-
-/* CIS tuple length field max */
-#define CIS_TUPLE_LEN_MAX	0xff
-
-/* Standard tuples we know about */
-
-#define CISTPL_NULL			0x00
-#define	CISTPL_VERS_1		0x15	/* CIS ver, manf, dev & ver strings */
-#define	CISTPL_MANFID		0x20	/* Manufacturer and device id */
-#define CISTPL_FUNCID		0x21	/* Function identification */
-#define	CISTPL_FUNCE		0x22	/* Function extensions */
-#define	CISTPL_CFTABLE		0x1b	/* Config table entry */
-#define	CISTPL_END		0xff	/* End of the CIS tuple chain */
-
-/* Function identifier provides context for the function extentions tuple */
-#define CISTPL_FID_SDIO		0x0c	/* Extensions defined by SDIO spec */
-
-/* Function extensions for LANs (assumed for extensions other than SDIO) */
-#define	LAN_TECH		1	/* Technology type */
-#define	LAN_SPEED		2	/* Raw bit rate */
-#define	LAN_MEDIA		3	/* Transmission media */
-#define	LAN_NID			4	/* Node identification (aka MAC addr) */
-#define	LAN_CONN		5	/* Connector standard */
-
-/* CFTable */
-#define CFTABLE_REGWIN_2K	0x08	/* 2k reg windows size */
-#define CFTABLE_REGWIN_4K	0x10	/* 4k reg windows size */
-#define CFTABLE_REGWIN_8K	0x20	/* 8k reg windows size */
-
-/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
- * take one for HNBU, and use "extensions" (a la FUNCE) within it.
- */
-
-#define	CISTPL_BRCM_HNBU	0x80
-
-/* Subtypes of BRCM_HNBU: */
-
-#define HNBU_SROMREV		0x00	/* A byte with sromrev, 1 if not present */
-#define HNBU_CHIPID		0x01	/* Two 16bit values: PCI vendor & device id */
-#define HNBU_BOARDREV		0x02	/* One byte board revision */
-#define HNBU_PAPARMS		0x03	/* PA parameters: 8 (sromrev == 1)
-					 * or 9 (sromrev > 1) bytes
-					 */
-#define HNBU_OEM		0x04	/* Eight bytes OEM data (sromrev == 1) */
-#define HNBU_CC			0x05	/* Default country code (sromrev == 1) */
-#define	HNBU_AA			0x06	/* Antennas available */
-#define	HNBU_AG			0x07	/* Antenna gain */
-#define HNBU_BOARDFLAGS		0x08	/* board flags (2 or 4 bytes) */
-#define HNBU_LEDS		0x09	/* LED set */
-#define HNBU_CCODE		0x0a	/* Country code (2 bytes ascii + 1 byte cctl)
-					 * in rev 2
-					 */
-#define HNBU_CCKPO		0x0b	/* 2 byte cck power offsets in rev 3 */
-#define HNBU_OFDMPO		0x0c	/* 4 byte 11g ofdm power offsets in rev 3 */
-#define HNBU_GPIOTIMER		0x0d	/* 2 bytes with on/off values in rev 3 */
-#define HNBU_PAPARMS5G		0x0e	/* 5G PA params */
-#define HNBU_ANT5G		0x0f	/* 4328 5G antennas available/gain */
-#define HNBU_RDLID		0x10	/* 2 byte USB remote downloader (RDL) product Id */
-#define HNBU_RSSISMBXA2G	0x11	/* 4328 2G RSSI mid pt sel & board switch arch,
-					 * 2 bytes, rev 3.
-					 */
-#define HNBU_RSSISMBXA5G	0x12	/* 4328 5G RSSI mid pt sel & board switch arch,
-					 * 2 bytes, rev 3.
-					 */
-#define HNBU_XTALFREQ		0x13	/* 4 byte Crystal frequency in kilohertz */
-#define HNBU_TRI2G		0x14	/* 4328 2G TR isolation, 1 byte */
-#define HNBU_TRI5G		0x15	/* 4328 5G TR isolation, 3 bytes */
-#define HNBU_RXPO2G		0x16	/* 4328 2G RX power offset, 1 byte */
-#define HNBU_RXPO5G		0x17	/* 4328 5G RX power offset, 1 byte */
-#define HNBU_BOARDNUM		0x18	/* board serial number, independent of mac addr */
-#define HNBU_MACADDR		0x19	/* mac addr override for the standard CIS LAN_NID */
-#define HNBU_RDLSN		0x1a	/* 2 bytes; serial # advertised in USB descriptor */
-#define HNBU_BOARDTYPE		0x1b	/* 2 bytes; boardtype */
-#define HNBU_LEDDC		0x1c	/* 2 bytes; LED duty cycle */
-#define HNBU_HNBUCIS		0x1d	/* what follows is proprietary HNBU CIS format */
-#define HNBU_PAPARMS_SSLPNPHY	0x1e	/* SSLPNPHY PA params */
-#define HNBU_RSSISMBXA2G_SSLPNPHY 0x1f	/* SSLPNPHY RSSI mid pt sel & board switch arch */
-#define HNBU_RDLRNDIS		0x20	/* 1 byte; 1 = RDL advertises RNDIS config */
-#define HNBU_CHAINSWITCH	0x21	/* 2 byte; txchain, rxchain */
-#define HNBU_REGREV		0x22	/* 1 byte; */
-#define HNBU_FEM		0x23	/* 2 or 4 byte: 11n frontend specification */
-#define HNBU_PAPARMS_C0		0x24	/* 8 or 30 bytes: 11n pa paramater for chain 0 */
-#define HNBU_PAPARMS_C1		0x25	/* 8 or 30 bytes: 11n pa paramater for chain 1 */
-#define HNBU_PAPARMS_C2		0x26	/* 8 or 30 bytes: 11n pa paramater for chain 2 */
-#define HNBU_PAPARMS_C3		0x27	/* 8 or 30 bytes: 11n pa paramater for chain 3 */
-#define HNBU_PO_CCKOFDM		0x28	/* 6 or 18 bytes: cck2g/ofdm2g/ofdm5g power offset */
-#define HNBU_PO_MCS2G		0x29	/* 8 bytes: mcs2g power offset */
-#define HNBU_PO_MCS5GM		0x2a	/* 8 bytes: mcs5g mid band power offset */
-#define HNBU_PO_MCS5GLH		0x2b	/* 16 bytes: mcs5g low-high band power offset */
-#define HNBU_PO_CDD		0x2c	/* 2 bytes: cdd2g/5g power offset */
-#define HNBU_PO_STBC		0x2d	/* 2 bytes: stbc2g/5g power offset */
-#define HNBU_PO_40M		0x2e	/* 2 bytes: 40Mhz channel 2g/5g power offset */
-#define HNBU_PO_40MDUP		0x2f	/* 2 bytes: 40Mhz channel dup 2g/5g power offset */
-
-#define HNBU_RDLRWU		0x30	/* 1 byte; 1 = RDL advertises Remote Wake-up */
-#define HNBU_WPS		0x31	/* 1 byte; GPIO pin for WPS button */
-#define HNBU_USBFS		0x32	/* 1 byte; 1 = USB advertises FS mode only */
-#define HNBU_BRMIN		0x33	/* 4 byte bootloader min resource mask */
-#define HNBU_BRMAX		0x34	/* 4 byte bootloader max resource mask */
-#define HNBU_PATCH		0x35	/* bootloader patch addr(2b) & data(4b) pair */
-#define HNBU_CCKFILTTYPE	0x36	/* CCK digital filter selection options */
-#define HNBU_OFDMPO5G		0x37	/* 4 * 3 = 12 byte 11a ofdm power offsets in rev 3 */
-
-#define HNBU_USBEPNUM		0x40	/* USB endpoint numbers */
-#define HNBU_SROM3SWRGN		0x80	/* 78 bytes; srom rev 3 s/w region without crc8
-					 * plus extra info appended.
-					 */
-#define HNBU_RESERVED		0x81	/* Reserved for non-BRCM post-mfg additions */
-#define HNBU_CUSTOM1		0x82	/* 4 byte; For non-BRCM post-mfg additions */
-#define HNBU_CUSTOM2		0x83	/* Reserved; For non-BRCM post-mfg additions */
-#endif				/* !defined(ESTA_POSTMOGRIFY_REMOVAL) */
-
-/* sbtmstatelow */
-#define SBTML_INT_ACK		0x40000	/* ack the sb interrupt */
-#define SBTML_INT_EN		0x20000	/* enable sb interrupt */
-
-/* sbtmstatehigh */
-#define SBTMH_INT_STATUS	0x40000	/* sb interrupt status */
-
-#endif				/* _SBPCMCIA_H */