Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
  staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
  staging:iio:kfifo_buf fix double initialization of the ring device structure.
  staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
  staging:iio:imu fix missing register table index for some channels
  spectra: enable device before poking it
  staging: rts_pstor: Fix a miswriting
  staging/lirc_bt829: Return -ENODEV when no hardware is found.
  staging/lirc_parallel: remove pointless prototypes.
  staging/lirc_parallel: fix panic on rmmod
  staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
  Staging: zram: Fix kunmapping order
  Revert "gma500: Fix dependencies"
  gma500: Add medfield header
  gma500: wire up the mrst i2c bus from chip_info
  gma500: Fix DPU build
  gma500: Clean up the DPU config and make it runtime
  gma500: resync with Medfield progress
  gma500: Use the mrst helpers and power control for mode commit
  gma500@ Fix backlight range error
  gma500: More Moorestown muddle meddling means MM maybe might modeset
  ...

Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
 - Documentation/feature-removal-schedule.txt
 - drivers/staging/bcm/headers.h
 - drivers/staging/brcm80211/brcmfmac/dhd_linux.c
 - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
 - drivers/staging/brcm80211/brcmfmac/wl_iw.c
 - drivers/staging/et131x/et131x_netdev.c
 - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
 - drivers/staging/rtl8192e/r8192E.h
 - drivers/staging/usbip/userspace/src/utils.h

1 files changed, 311 insertions, 0 deletions

diff --git a/drivers/staging/brcm80211/brcmsmac/antsel.c b/drivers/staging/brcm80211/brcmsmac/antsel.c
new file mode 100644
index 0000000..c4e76c09
--- /dev/null
+++ b/drivers/staging/brcm80211/brcmsmac/antsel.c
@@ -0,0 +1,311 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/slab.h>
+#include <net/mac80211.h>
+
+#include "types.h"
+#include "bmac.h"
+#include "main.h"
+#include "phy_shim.h"
+#include "antsel.h"
+
+#define ANT_SELCFG_AUTO		0x80	/* bit indicates antenna sel AUTO */
+#define ANT_SELCFG_MASK		0x33	/* antenna configuration mask */
+#define ANT_SELCFG_TX_UNICAST	0	/* unicast tx antenna configuration */
+#define ANT_SELCFG_RX_UNICAST	1	/* unicast rx antenna configuration */
+#define ANT_SELCFG_TX_DEF	2	/* default tx antenna configuration */
+#define ANT_SELCFG_RX_DEF	3	/* default rx antenna configuration */
+
+/* useful macros */
+#define BRCMS_ANTSEL_11N_0(ant)	((((ant) & ANT_SELCFG_MASK) >> 4) & 0xf)
+#define BRCMS_ANTSEL_11N_1(ant)	(((ant) & ANT_SELCFG_MASK) & 0xf)
+#define BRCMS_ANTIDX_11N(ant)	(((BRCMS_ANTSEL_11N_0(ant)) << 2) +\
+				(BRCMS_ANTSEL_11N_1(ant)))
+#define BRCMS_ANT_ISAUTO_11N(ant) (((ant) & ANT_SELCFG_AUTO) == ANT_SELCFG_AUTO)
+#define BRCMS_ANTSEL_11N(ant)	((ant) & ANT_SELCFG_MASK)
+
+/* antenna switch */
+/* defines for no boardlevel antenna diversity */
+#define ANT_SELCFG_DEF_2x2	0x01	/* default antenna configuration */
+
+/* 2x3 antdiv defines and tables for GPIO communication */
+#define ANT_SELCFG_NUM_2x3	3
+#define ANT_SELCFG_DEF_2x3	0x01	/* default antenna configuration */
+
+/* 2x4 antdiv rev4 defines and tables for GPIO communication */
+#define ANT_SELCFG_NUM_2x4	4
+#define ANT_SELCFG_DEF_2x4	0x02	/* default antenna configuration */
+
+/* static functions */
+static int brcms_c_antsel_cfgupd(struct antsel_info *asi,
+				 struct brcms_antselcfg *antsel);
+static u8 brcms_c_antsel_id2antcfg(struct antsel_info *asi, u8 id);
+static u16 brcms_c_antsel_antcfg2antsel(struct antsel_info *asi, u8 ant_cfg);
+static void brcms_c_antsel_init_cfg(struct antsel_info *asi,
+				struct brcms_antselcfg *antsel,
+				bool auto_sel);
+
+const u16 mimo_2x4_div_antselpat_tbl[] = {
+	0, 0, 0x9, 0xa,		/* ant0: 0 ant1: 2,3 */
+	0, 0, 0x5, 0x6,		/* ant0: 1 ant1: 2,3 */
+	0, 0, 0, 0,		/* n.a.              */
+	0, 0, 0, 0		/* n.a.              */
+};
+
+const u8 mimo_2x4_div_antselid_tbl[16] = {
+	0, 0, 0, 0, 0, 2, 3, 0,
+	0, 0, 1, 0, 0, 0, 0, 0	/* pat to antselid */
+};
+
+const u16 mimo_2x3_div_antselpat_tbl[] = {
+	16, 0, 1, 16,		/* ant0: 0 ant1: 1,2 */
+	16, 16, 16, 16,		/* n.a.              */
+	16, 2, 16, 16,		/* ant0: 2 ant1: 1   */
+	16, 16, 16, 16		/* n.a.              */
+};
+
+const u8 mimo_2x3_div_antselid_tbl[16] = {
+	0, 1, 2, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0	/* pat to antselid */
+};
+
+struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc)
+{
+	struct antsel_info *asi;
+
+	asi = kzalloc(sizeof(struct antsel_info), GFP_ATOMIC);
+	if (!asi) {
+		wiphy_err(wlc->wiphy, "wl%d: brcms_c_antsel_attach: out of "
+			  "mem\n", wlc->pub->unit);
+		return NULL;
+	}
+
+	asi->wlc = wlc;
+	asi->pub = wlc->pub;
+	asi->antsel_type = ANTSEL_NA;
+	asi->antsel_avail = false;
+	asi->antsel_antswitch = (u8) getintvar(asi->pub->vars, "antswitch");
+
+	if ((asi->pub->sromrev >= 4) && (asi->antsel_antswitch != 0)) {
+		switch (asi->antsel_antswitch) {
+		case ANTSWITCH_TYPE_1:
+		case ANTSWITCH_TYPE_2:
+		case ANTSWITCH_TYPE_3:
+			/* 4321/2 board with 2x3 switch logic */
+			asi->antsel_type = ANTSEL_2x3;
+			/* Antenna selection availability */
+			if (((u16) getintvar(asi->pub->vars, "aa2g") == 7) ||
+			    ((u16) getintvar(asi->pub->vars, "aa5g") == 7)) {
+				asi->antsel_avail = true;
+			} else
+			    if (((u16) getintvar(asi->pub->vars, "aa2g") ==
+				 3)
+				|| ((u16) getintvar(asi->pub->vars, "aa5g")
+				    == 3)) {
+				asi->antsel_avail = false;
+			} else {
+				asi->antsel_avail = false;
+				wiphy_err(wlc->wiphy, "antsel_attach: 2o3 "
+					  "board cfg invalid\n");
+			}
+			break;
+		default:
+			break;
+		}
+	} else if ((asi->pub->sromrev == 4) &&
+		   ((u16) getintvar(asi->pub->vars, "aa2g") == 7) &&
+		   ((u16) getintvar(asi->pub->vars, "aa5g") == 0)) {
+		/* hack to match old 4321CB2 cards with 2of3 antenna switch */
+		asi->antsel_type = ANTSEL_2x3;
+		asi->antsel_avail = true;
+	} else if (asi->pub->boardflags2 & BFL2_2X4_DIV) {
+		asi->antsel_type = ANTSEL_2x4;
+		asi->antsel_avail = true;
+	}
+
+	/* Set the antenna selection type for the low driver */
+	brcms_b_antsel_type_set(wlc->hw, asi->antsel_type);
+
+	/* Init (auto/manual) antenna selection */
+	brcms_c_antsel_init_cfg(asi, &asi->antcfg_11n, true);
+	brcms_c_antsel_init_cfg(asi, &asi->antcfg_cur, true);
+
+	return asi;
+}
+
+void brcms_c_antsel_detach(struct antsel_info *asi)
+{
+	kfree(asi);
+}
+
+void brcms_c_antsel_init(struct antsel_info *asi)
+{
+	if ((asi->antsel_type == ANTSEL_2x3) ||
+	    (asi->antsel_type == ANTSEL_2x4))
+		brcms_c_antsel_cfgupd(asi, &asi->antcfg_11n);
+}
+
+/* boardlevel antenna selection: init antenna selection structure */
+static void
+brcms_c_antsel_init_cfg(struct antsel_info *asi, struct brcms_antselcfg *antsel,
+		    bool auto_sel)
+{
+	if (asi->antsel_type == ANTSEL_2x3) {
+		u8 antcfg_def = ANT_SELCFG_DEF_2x3 |
+		    ((asi->antsel_avail && auto_sel) ? ANT_SELCFG_AUTO : 0);
+		antsel->ant_config[ANT_SELCFG_TX_DEF] = antcfg_def;
+		antsel->ant_config[ANT_SELCFG_TX_UNICAST] = antcfg_def;
+		antsel->ant_config[ANT_SELCFG_RX_DEF] = antcfg_def;
+		antsel->ant_config[ANT_SELCFG_RX_UNICAST] = antcfg_def;
+		antsel->num_antcfg = ANT_SELCFG_NUM_2x3;
+
+	} else if (asi->antsel_type == ANTSEL_2x4) {
+
+		antsel->ant_config[ANT_SELCFG_TX_DEF] = ANT_SELCFG_DEF_2x4;
+		antsel->ant_config[ANT_SELCFG_TX_UNICAST] = ANT_SELCFG_DEF_2x4;
+		antsel->ant_config[ANT_SELCFG_RX_DEF] = ANT_SELCFG_DEF_2x4;
+		antsel->ant_config[ANT_SELCFG_RX_UNICAST] = ANT_SELCFG_DEF_2x4;
+		antsel->num_antcfg = ANT_SELCFG_NUM_2x4;
+
+	} else {		/* no antenna selection available */
+
+		antsel->ant_config[ANT_SELCFG_TX_DEF] = ANT_SELCFG_DEF_2x2;
+		antsel->ant_config[ANT_SELCFG_TX_UNICAST] = ANT_SELCFG_DEF_2x2;
+		antsel->ant_config[ANT_SELCFG_RX_DEF] = ANT_SELCFG_DEF_2x2;
+		antsel->ant_config[ANT_SELCFG_RX_UNICAST] = ANT_SELCFG_DEF_2x2;
+		antsel->num_antcfg = 0;
+	}
+}
+
+void
+brcms_c_antsel_antcfg_get(struct antsel_info *asi, bool usedef, bool sel,
+		      u8 antselid, u8 fbantselid, u8 *antcfg,
+		      u8 *fbantcfg)
+{
+	u8 ant;
+
+	/* if use default, assign it and return */
+	if (usedef) {
+		*antcfg = asi->antcfg_11n.ant_config[ANT_SELCFG_TX_DEF];
+		*fbantcfg = *antcfg;
+		return;
+	}
+
+	if (!sel) {
+		*antcfg = asi->antcfg_11n.ant_config[ANT_SELCFG_TX_UNICAST];
+		*fbantcfg = *antcfg;
+
+	} else {
+		ant = asi->antcfg_11n.ant_config[ANT_SELCFG_TX_UNICAST];
+		if ((ant & ANT_SELCFG_AUTO) == ANT_SELCFG_AUTO) {
+			*antcfg = brcms_c_antsel_id2antcfg(asi, antselid);
+			*fbantcfg = brcms_c_antsel_id2antcfg(asi, fbantselid);
+		} else {
+			*antcfg =
+			    asi->antcfg_11n.ant_config[ANT_SELCFG_TX_UNICAST];
+			*fbantcfg = *antcfg;
+		}
+	}
+	return;
+}
+
+/* boardlevel antenna selection: convert mimo_antsel (ucode interface) to id */
+u8 brcms_c_antsel_antsel2id(struct antsel_info *asi, u16 antsel)
+{
+	u8 antselid = 0;
+
+	if (asi->antsel_type == ANTSEL_2x4) {
+		/* 2x4 antenna diversity board, 4 cfgs: 0-2 0-3 1-2 1-3 */
+		antselid = mimo_2x4_div_antselid_tbl[(antsel & 0xf)];
+		return antselid;
+
+	} else if (asi->antsel_type == ANTSEL_2x3) {
+		/* 2x3 antenna selection, 3 cfgs: 0-1 0-2 2-1 */
+		antselid = mimo_2x3_div_antselid_tbl[(antsel & 0xf)];
+		return antselid;
+	}
+
+	return antselid;
+}
+
+/* boardlevel antenna selection: convert id to ant_cfg */
+static u8 brcms_c_antsel_id2antcfg(struct antsel_info *asi, u8 id)
+{
+	u8 antcfg = ANT_SELCFG_DEF_2x2;
+
+	if (asi->antsel_type == ANTSEL_2x4) {
+		/* 2x4 antenna diversity board, 4 cfgs: 0-2 0-3 1-2 1-3 */
+		antcfg = (((id & 0x2) << 3) | ((id & 0x1) + 2));
+		return antcfg;
+
+	} else if (asi->antsel_type == ANTSEL_2x3) {
+		/* 2x3 antenna selection, 3 cfgs: 0-1 0-2 2-1 */
+		antcfg = (((id & 0x02) << 4) | ((id & 0x1) + 1));
+		return antcfg;
+	}
+
+	return antcfg;
+}
+
+/* boardlevel antenna selection: convert ant_cfg to mimo_antsel (ucode interface) */
+static u16 brcms_c_antsel_antcfg2antsel(struct antsel_info *asi, u8 ant_cfg)
+{
+	u8 idx = BRCMS_ANTIDX_11N(BRCMS_ANTSEL_11N(ant_cfg));
+	u16 mimo_antsel = 0;
+
+	if (asi->antsel_type == ANTSEL_2x4) {
+		/* 2x4 antenna diversity board, 4 cfgs: 0-2 0-3 1-2 1-3 */
+		mimo_antsel = (mimo_2x4_div_antselpat_tbl[idx] & 0xf);
+		return mimo_antsel;
+
+	} else if (asi->antsel_type == ANTSEL_2x3) {
+		/* 2x3 antenna selection, 3 cfgs: 0-1 0-2 2-1 */
+		mimo_antsel = (mimo_2x3_div_antselpat_tbl[idx] & 0xf);
+		return mimo_antsel;
+	}
+
+	return mimo_antsel;
+}
+
+/* boardlevel antenna selection: ucode interface control */
+static int brcms_c_antsel_cfgupd(struct antsel_info *asi,
+				 struct brcms_antselcfg *antsel)
+{
+	struct brcms_c_info *wlc = asi->wlc;
+	u8 ant_cfg;
+	u16 mimo_antsel;
+
+	/* 1) Update TX antconfig for all frames that are not unicast data
+	 *    (aka default TX)
+	 */
+	ant_cfg = antsel->ant_config[ANT_SELCFG_TX_DEF];
+	mimo_antsel = brcms_c_antsel_antcfg2antsel(asi, ant_cfg);
+	brcms_c_write_shm(wlc, M_MIMO_ANTSEL_TXDFLT, mimo_antsel);
+	/* Update driver stats for currently selected default tx/rx antenna config */
+	asi->antcfg_cur.ant_config[ANT_SELCFG_TX_DEF] = ant_cfg;
+
+	/* 2) Update RX antconfig for all frames that are not unicast data
+	 *    (aka default RX)
+	 */
+	ant_cfg = antsel->ant_config[ANT_SELCFG_RX_DEF];
+	mimo_antsel = brcms_c_antsel_antcfg2antsel(asi, ant_cfg);
+	brcms_c_write_shm(wlc, M_MIMO_ANTSEL_RXDFLT, mimo_antsel);
+	/* Update driver stats for currently selected default tx/rx antenna config */
+	asi->antcfg_cur.ant_config[ANT_SELCFG_RX_DEF] = ant_cfg;
+
+	return 0;
+}