Staging: bcm: Properly format comments as needed in target_params.h

This patch formats all comments, and removes
them as needed in target_params.h.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 15 insertions, 18 deletions

diff --git a/drivers/staging/bcm/target_params.h b/drivers/staging/bcm/target_params.h
index cff6a12..548bfd6 100644
--- a/drivers/staging/bcm/target_params.h
+++ b/drivers/staging/bcm/target_params.h
@@ -4,34 +4,31 @@
 typedef struct _TARGET_PARAMS
 {
 	B_UINT32 m_u32CfgVersion;
-	// Scanning Related Params
 	B_UINT32 m_u32CenterFrequency;
 	B_UINT32 m_u32BandAScan;
 	B_UINT32 m_u32BandBScan;
 	B_UINT32 m_u32BandCScan;
-	// QoS Params
 	B_UINT32 m_u32ErtpsOptions;
 	B_UINT32 m_u32PHSEnable;
-	// HO Params
 	B_UINT32 m_u32HoEnable;
 	B_UINT32 m_u32HoReserved1;
 	B_UINT32 m_u32HoReserved2;
-	// Power Control Params
 	B_UINT32 m_u32MimoEnable;
 	B_UINT32 m_u32SecurityEnable;
-	B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
+	B_UINT32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
 	/* PowerSaving Mode Options:
-	   bit 0 = 1: CPE mode - to keep pcmcia if alive;
-	   bit 1 = 1: CINR reporting in Idlemode Msg
-	   bit 2 = 1: Default PSC Enable in sleepmode*/
+	 * bit 0 = 1: CPE mode - to keep pcmcia if alive;
+	 * bit 1 = 1: CINR reporting in Idlemode Msg
+	 * bit 2 = 1: Default PSC Enable in sleepmode
+	 */
 	B_UINT32 m_u32PowerSavingModeOptions;
 	B_UINT32 m_u32ArqEnable;
-	// From Version #3, the HARQ section renamed as general
+	/* From Version #3, the HARQ section renamed as general */
 	B_UINT32 m_u32HarqEnable;
-	// EEPROM Param Location
 	B_UINT32  m_u32EEPROMFlag;
-	// BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
-	// Unused - LSByte
+	/* BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
+	 * Unused - LSByte
+	 */
 	B_UINT32 m_u32Customize;
 	B_UINT32 m_u32ConfigBW;  /* In Hz */
 	B_UINT32 m_u32ShutDownInitThresholdTimer;
@@ -39,11 +36,10 @@ typedef struct _TARGET_PARAMS
 	B_UINT32 m_u32PhyParameter1;
 	B_UINT32 m_u32PhyParameter2;
 	B_UINT32 m_u32PhyParameter3;
-	B_UINT32 m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
+	B_UINT32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
 	B_UINT32 m_u32MaxMACDataperDLFrame;
 	B_UINT32 m_u32MaxMACDataperULFrame;
 	B_UINT32 m_u32Corr2MacFlags;
-	//adding driver params.
 	B_UINT32 HostDrvrConfig1;
 	B_UINT32 HostDrvrConfig2;
 	B_UINT32 HostDrvrConfig3;
@@ -51,10 +47,11 @@ typedef struct _TARGET_PARAMS
 	B_UINT32 HostDrvrConfig5;
 	B_UINT32 HostDrvrConfig6;
 	B_UINT32 m_u32SegmentedPUSCenable;
-	// removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
-	//BAMC Related Parameters
-	//Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
-	//bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
+	/* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
+	 * BAMC Related Parameters
+	 * Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
+	 * bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
+	 */
 	B_UINT32 m_u32BandAMCEnable;
 } stTargetParams, TARGET_PARAMS, *PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;