Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
  staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
  staging:iio:kfifo_buf fix double initialization of the ring device structure.
  staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
  staging:iio:imu fix missing register table index for some channels
  spectra: enable device before poking it
  staging: rts_pstor: Fix a miswriting
  staging/lirc_bt829: Return -ENODEV when no hardware is found.
  staging/lirc_parallel: remove pointless prototypes.
  staging/lirc_parallel: fix panic on rmmod
  staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
  Staging: zram: Fix kunmapping order
  Revert "gma500: Fix dependencies"
  gma500: Add medfield header
  gma500: wire up the mrst i2c bus from chip_info
  gma500: Fix DPU build
  gma500: Clean up the DPU config and make it runtime
  gma500: resync with Medfield progress
  gma500: Use the mrst helpers and power control for mode commit
  gma500@ Fix backlight range error
  gma500: More Moorestown muddle meddling means MM maybe might modeset
  ...

Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
 - Documentation/feature-removal-schedule.txt
 - drivers/staging/bcm/headers.h
 - drivers/staging/brcm80211/brcmfmac/dhd_linux.c
 - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
 - drivers/staging/brcm80211/brcmfmac/wl_iw.c
 - drivers/staging/et131x/et131x_netdev.c
 - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
 - drivers/staging/rtl8192e/r8192E.h
 - drivers/staging/usbip/userspace/src/utils.h

1 files changed, 41 insertions, 15 deletions

diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index 48dd9e3..499b7a9 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -954,9 +954,13 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
     const char *filename;
     const struct firmware *fw_entry;
     u32 fw_entry_size;
+    u8 **buf;
+    size_t *buf_len;
 
     switch (file) {
         case AR6K_OTP_FILE:
+		buf = &ar->fw_otp;
+		buf_len = &ar->fw_otp_len;
             if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
                 filename = AR6003_REV1_OTP_FILE;
             } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
@@ -970,6 +974,8 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
             break;
 
         case AR6K_FIRMWARE_FILE:
+		buf = &ar->fw;
+		buf_len = &ar->fw_len;
             if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
                 filename = AR6003_REV1_FIRMWARE_FILE;
             } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
@@ -1028,6 +1034,8 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
             break;
 
         case AR6K_PATCH_FILE:
+		buf = &ar->fw_patch;
+		buf_len = &ar->fw_patch_len;
             if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
                 filename = AR6003_REV1_PATCH_FILE;
             } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
@@ -1041,6 +1049,8 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
             break;
 
         case AR6K_BOARD_DATA_FILE:
+		buf = &ar->fw_data;
+		buf_len = &ar->fw_data_len;
             if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
                 filename = AR6003_REV1_BOARD_DATA_FILE;
             } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
@@ -1057,23 +1067,29 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown file type: %d\n", file));
             return A_ERROR;
     }
-    if ((A_REQUEST_FIRMWARE(&fw_entry, filename, ((struct device *)ar->osDevInfo.pOSDevice))) != 0)
-    {
-        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to get %s\n", filename));
-        return A_ENOENT;
+
+    if (*buf == NULL) {
+	    if ((A_REQUEST_FIRMWARE(&fw_entry, filename, ((struct device *)ar->osDevInfo.pOSDevice))) != 0) {
+		    AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to get %s\n", filename));
+		    return A_ENOENT;
+	    }
+
+	    *buf = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+	    *buf_len = fw_entry->size;
+	    A_RELEASE_FIRMWARE(fw_entry);
     }
 
 #ifdef SOFTMAC_FILE_USED
-    if (file==AR6K_BOARD_DATA_FILE && fw_entry->data) {
-        ar6000_softmac_update(ar, (u8 *)fw_entry->data, fw_entry->size);
+    if (file==AR6K_BOARD_DATA_FILE && *buf_len) {
+        ar6000_softmac_update(ar, *buf, *buf_len);
     }
 #endif 
 
 
-    fw_entry_size = fw_entry->size;
+    fw_entry_size = *buf_len;
 
     /* Load extended board data for AR6003 */
-    if ((file==AR6K_BOARD_DATA_FILE) && (fw_entry->data)) {
+    if ((file==AR6K_BOARD_DATA_FILE) && *buf) {
         u32 board_ext_address;
         u32 board_ext_data_size;
         u32 board_data_size;
@@ -1089,14 +1105,13 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
         AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board extended Data download address: 0x%x\n", board_ext_address));
 
         /* check whether the target has allocated memory for extended board data and file contains extended board data */
-        if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) {
+        if ((board_ext_address) && (*buf_len == (board_data_size + board_ext_data_size))) {
             u32 param;
 
-            status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (u8 *)(fw_entry->data + board_data_size), board_ext_data_size);
+            status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (u8 *)(*buf + board_data_size), board_ext_data_size);
 
             if (status) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
-                A_RELEASE_FIRMWARE(fw_entry);
                 return A_ERROR;
             }
 
@@ -1110,17 +1125,16 @@ ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address,
     }
 
     if (compressed) {
-        status = BMIFastDownload(ar->arHifDevice, address, (u8 *)fw_entry->data, fw_entry_size);
+        status = BMIFastDownload(ar->arHifDevice, address, *buf, fw_entry_size);
     } else {
-        status = BMIWriteMemory(ar->arHifDevice, address, (u8 *)fw_entry->data, fw_entry_size);
+        status = BMIWriteMemory(ar->arHifDevice, address, *buf, fw_entry_size);
     }
 
     if (status) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
-        A_RELEASE_FIRMWARE(fw_entry);
         return A_ERROR;
     }
-    A_RELEASE_FIRMWARE(fw_entry);
+
     return 0;
 }
 
@@ -2088,6 +2102,11 @@ ar6000_destroy(struct net_device *dev, unsigned int unregister)
     ar6000_remove_ap_interface();
 #endif /*CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
 
+    kfree(ar->fw_otp);
+    kfree(ar->fw);
+    kfree(ar->fw_patch);
+    kfree(ar->fw_data);
+
     AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("-ar6000_destroy \n"));
 }
 
@@ -4114,6 +4133,13 @@ ar6000_ready_event(void *devt, u8 *datap, u8 phyCap, u32 sw_ver, u32 abi_ver)
     ar->arVersion.wlan_ver = sw_ver;
     ar->arVersion.abi_ver = abi_ver;
 
+    snprintf(ar->wdev->wiphy->fw_version, sizeof(ar->wdev->wiphy->fw_version),
+	     "%u:%u:%u:%u",
+	     (ar->arVersion.wlan_ver & 0xf0000000) >> 28,
+	     (ar->arVersion.wlan_ver & 0x0f000000) >> 24,
+	     (ar->arVersion.wlan_ver & 0x00ff0000) >> 16,
+	     (ar->arVersion.wlan_ver & 0x0000ffff));
+
     /* Indicate to the waiting thread that the ready event was received */
     ar->arWmiReady = true;
     wake_up(&arEvent);