summaryrefslogtreecommitdiffstats
path: root/drivers/spmi
diff options
context:
space:
mode:
authorAnkit Gupta <ankgupta@codeaurora.org>2015-06-22 16:38:46 -0600
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-08-05 12:27:09 -0700
commita9fce374815d8ab94a3e6259802a944e2cc21408 (patch)
tree28f6edf1e905b15f40ac24e17018b54671baa331 /drivers/spmi
parent6497a8757361a88b73fc3814d2ee9b9fc105fa42 (diff)
downloadop-kernel-dev-a9fce374815d8ab94a3e6259802a944e2cc21408.zip
op-kernel-dev-a9fce374815d8ab94a3e6259802a944e2cc21408.tar.gz
spmi: add command tracepoints for SPMI
Add tracepoints to retrieve information about read, write and non-data commands. For performance measurement support tracepoints are added at the beginning and at the end of transfers. Following is a list showing the new tracepoint events. The "cmd" parameter here represents the opcode, SID, and full 16-bit address. spmi_write_begin: cmd and data buffer. spmi_write_end : cmd and return value. spmi_read_begin : cmd. spmi_read_end : cmd, return value and data buffer. spmi_cmd : cmd. The reason that cmd appears at both the beginning and at the end event is that SPMI drivers can request commands concurrently. cmd helps in matching the corresponding events. SPMI tracepoints can be enabled like: echo 1 >/sys/kernel/debug/tracing/events/spmi/enable and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace that look like: ... spmi_read_begin: opc=56 sid=00 addr=0x0000 ... spmi_read_end: opc=56 sid=00 addr=0x0000 ret=0 len=02 buf=0x[01-40] ... spmi_write_begin: opc=48 sid=00 addr=0x0000 len=3 buf=0x[ff-ff-ff] Suggested-by: Sagar Dharia <sdharia@codeaurora.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Gilad Avidov <gavidov@codeaurora.org> Signed-off-by: Ankit Gupta <ankgupta@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/spmi')
-rw-r--r--drivers/spmi/spmi.c22
1 files changed, 19 insertions, 3 deletions
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index 9493843..11467e1 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -22,6 +22,8 @@
#include <linux/pm_runtime.h>
#include <dt-bindings/spmi/spmi.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/spmi.h>
static DEFINE_IDA(ctrl_ida);
@@ -96,28 +98,42 @@ EXPORT_SYMBOL_GPL(spmi_device_remove);
static inline int
spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid)
{
+ int ret;
+
if (!ctrl || !ctrl->cmd || ctrl->dev.type != &spmi_ctrl_type)
return -EINVAL;
- return ctrl->cmd(ctrl, opcode, sid);
+ ret = ctrl->cmd(ctrl, opcode, sid);
+ trace_spmi_cmd(opcode, sid, ret);
+ return ret;
}
static inline int spmi_read_cmd(struct spmi_controller *ctrl, u8 opcode,
u8 sid, u16 addr, u8 *buf, size_t len)
{
+ int ret;
+
if (!ctrl || !ctrl->read_cmd || ctrl->dev.type != &spmi_ctrl_type)
return -EINVAL;
- return ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len);
+ trace_spmi_read_begin(opcode, sid, addr);
+ ret = ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len);
+ trace_spmi_read_end(opcode, sid, addr, ret, len, buf);
+ return ret;
}
static inline int spmi_write_cmd(struct spmi_controller *ctrl, u8 opcode,
u8 sid, u16 addr, const u8 *buf, size_t len)
{
+ int ret;
+
if (!ctrl || !ctrl->write_cmd || ctrl->dev.type != &spmi_ctrl_type)
return -EINVAL;
- return ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len);
+ trace_spmi_write_begin(opcode, sid, addr, len, buf);
+ ret = ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len);
+ trace_spmi_write_end(opcode, sid, addr, ret);
+ return ret;
}
/**
OpenPOWER on IntegriCloud