summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorFeng Tang <feng.tang@intel.com>2010-01-20 13:49:45 -0700
committerGrant Likely <grant.likely@secretlab.ca>2010-01-20 13:49:45 -0700
commit552e450929a7298cc8834fd2824a60b2e914f70e (patch)
tree1b9568370d1b40f23dd4d73765e98ff74665eb07 /drivers/spi
parent51f921c1eb1124fb99ab0728c19e8e14c82c81be (diff)
downloadop-kernel-dev-552e450929a7298cc8834fd2824a60b2e914f70e.zip
op-kernel-dev-552e450929a7298cc8834fd2824a60b2e914f70e.tar.gz
spi/dw_spi: refine the IRQ mode working flow
Now dw_spi core fully supports 3 transfer modes: pure polling, DMA and IRQ mode. IRQ mode will use the FIFO half empty as the IRQ trigger, so each interface driver need set the fifo_len, so that core driver can handle it properly Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/dw_spi.c64
-rw-r--r--drivers/spi/dw_spi_pci.c1
2 files changed, 40 insertions, 25 deletions
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 521d680..1bb709b 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -358,6 +358,8 @@ static void transfer_complete(struct dw_spi *dws)
static irqreturn_t interrupt_transfer(struct dw_spi *dws)
{
u16 irq_status, irq_mask = 0x3f;
+ u32 int_level = dws->fifo_len / 2;
+ u32 left;
irq_status = dw_readw(dws, isr) & irq_mask;
/* Error handling */
@@ -369,22 +371,23 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws)
return IRQ_HANDLED;
}
- /* INT comes from tx */
- if (dws->tx && (irq_status & SPI_INT_TXEI)) {
- while (dws->tx < dws->tx_end)
+ if (irq_status & SPI_INT_TXEI) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+
+ left = (dws->tx_end - dws->tx) / dws->n_bytes;
+ left = (left > int_level) ? int_level : left;
+
+ while (left--)
dws->write(dws);
+ dws->read(dws);
- if (dws->tx == dws->tx_end) {
- spi_mask_intr(dws, SPI_INT_TXEI);
+ /* Re-enable the IRQ if there is still data left to tx */
+ if (dws->tx_end > dws->tx)
+ spi_umask_intr(dws, SPI_INT_TXEI);
+ else
transfer_complete(dws);
- }
}
- /* INT comes from rx */
- if (dws->rx && (irq_status & SPI_INT_RXFI)) {
- if (dws->read(dws))
- transfer_complete(dws);
- }
return IRQ_HANDLED;
}
@@ -428,6 +431,7 @@ static void pump_transfers(unsigned long data)
u8 bits = 0;
u8 imask = 0;
u8 cs_change = 0;
+ u16 txint_level = 0;
u16 clk_div = 0;
u32 speed = 0;
u32 cr0 = 0;
@@ -438,6 +442,9 @@ static void pump_transfers(unsigned long data)
chip = dws->cur_chip;
spi = message->spi;
+ if (unlikely(!chip->clk_div))
+ chip->clk_div = dws->max_freq / chip->speed_hz;
+
if (message->state == ERROR_STATE) {
message->status = -EIO;
goto early_exit;
@@ -492,7 +499,7 @@ static void pump_transfers(unsigned long data)
/* clk_div doesn't support odd number */
clk_div = dws->max_freq / speed;
- clk_div = (clk_div >> 1) << 1;
+ clk_div = (clk_div + 1) & 0xfffe;
chip->speed_hz = speed;
chip->clk_div = clk_div;
@@ -535,11 +542,16 @@ static void pump_transfers(unsigned long data)
/* Check if current transfer is a DMA transaction */
dws->dma_mapped = map_dma_buffers(dws);
+ /*
+ * Interrupt mode
+ * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
+ */
if (!dws->dma_mapped && !chip->poll_mode) {
- if (dws->rx)
- imask |= SPI_INT_RXFI;
- if (dws->tx)
- imask |= SPI_INT_TXEI;
+ int templen = dws->len / dws->n_bytes;
+ txint_level = dws->fifo_len / 2;
+ txint_level = (templen > txint_level) ? txint_level : templen;
+
+ imask |= SPI_INT_TXEI;
dws->transfer_handler = interrupt_transfer;
}
@@ -549,21 +561,23 @@ static void pump_transfers(unsigned long data)
* 2. clk_div is changed
* 3. control value changes
*/
- if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) {
+ if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) {
spi_enable_chip(dws, 0);
if (dw_readw(dws, ctrl0) != cr0)
dw_writew(dws, ctrl0, cr0);
+ spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
+ spi_chip_sel(dws, spi->chip_select);
+
/* Set the interrupt mask, for poll mode just diable all int */
spi_mask_intr(dws, 0xff);
- if (!chip->poll_mode)
+ if (imask)
spi_umask_intr(dws, imask);
+ if (txint_level)
+ dw_writew(dws, txfltr, txint_level);
- spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
- spi_chip_sel(dws, spi->chip_select);
spi_enable_chip(dws, 1);
-
if (cs_change)
dws->prev_chip = chip;
}
@@ -712,11 +726,11 @@ static int dw_spi_setup(struct spi_device *spi)
}
chip->bits_per_word = spi->bits_per_word;
+ if (!spi->max_speed_hz) {
+ dev_err(&spi->dev, "No max speed HZ parameter\n");
+ return -EINVAL;
+ }
chip->speed_hz = spi->max_speed_hz;
- if (chip->speed_hz)
- chip->clk_div = 25000000 / chip->speed_hz;
- else
- chip->clk_div = 8; /* default value */
chip->tmode = 0; /* Tx & Rx */
/* Default SPI mode is SCPOL = 0, SCPH = 0 */
diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c
index 7980f14..1f0735f 100644
--- a/drivers/spi/dw_spi_pci.c
+++ b/drivers/spi/dw_spi_pci.c
@@ -73,6 +73,7 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev,
dws->num_cs = 4;
dws->max_freq = 25000000; /* for Moorestwon */
dws->irq = pdev->irq;
+ dws->fifo_len = 40; /* FIFO has 40 words buffer */
ret = dw_spi_add_host(dws);
if (ret)
OpenPOWER on IntegriCloud